SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt2400pci.c

   1 /*
   2         Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2400pci
  23         Abstract: rt2400pci device specific routines.
  24         Supported chipsets: RT2460.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt2400pci.h"
  38
  39 /*
  40  * Register access.
  41  * All access to the CSR registers will go through the methods
  42  * rt2x00pci_register_read and rt2x00pci_register_write.
  43  * BBP and RF register require indirect register access,
  44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  45  * These indirect registers work with busy bits,
  46  * and we will try maximal REGISTER_BUSY_COUNT times to access
  47  * the register while taking a REGISTER_BUSY_DELAY us delay
  48  * between each attampt. When the busy bit is still set at that time,
  49  * the access attempt is considered to have failed,
  50  * and we will print an error.
  51  */
  52 static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev)
  53 {
  54         u32 reg;
  55         unsigned int i;
  56
  57         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  58                 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
  59                 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
  60                         break;
  61                 udelay(REGISTER_BUSY_DELAY);
  62         }
  63
  64         return reg;
  65 }
  66
  67 static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  68                                 const unsigned int word, const u8 value)
  69 {
  70         u32 reg;
  71
  72         /*
  73          * Wait until the BBP becomes ready.
  74          */
  75         reg = rt2400pci_bbp_check(rt2x00dev);
  76         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  77                 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
  78                 return;
  79         }
  80
  81         /*
  82          * Write the data into the BBP.
  83          */
  84         reg = 0;
  85         rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  86         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  87         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  88         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  89
  90         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  91 }
  92
  93 static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  94                                const unsigned int word, u8 *value)
  95 {
  96         u32 reg;
  97
  98         /*
  99          * Wait until the BBP becomes ready.
 100          */
 101         reg = rt2400pci_bbp_check(rt2x00dev);
 102         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 103                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 104                 return;
 105         }
 106
 107         /*
 108          * Write the request into the BBP.
 109          */
 110         reg = 0;
 111         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
 112         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
 113         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
 114
 115         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 116
 117         /*
 118          * Wait until the BBP becomes ready.
 119          */
 120         reg = rt2400pci_bbp_check(rt2x00dev);
 121         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 122                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 123                 *value = 0xff;
 124                 return;
 125         }
 126
 127         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 128 }
 129
 130 static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev,
 131                                const unsigned int word, const u32 value)
 132 {
 133         u32 reg;
 134         unsigned int i;
 135
 136         if (!word)
 137                 return;
 138
 139         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 140                 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
 141                 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
 142                         goto rf_write;
 143                 udelay(REGISTER_BUSY_DELAY);
 144         }
 145
 146         ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
 147         return;
 148
 149 rf_write:
 150         reg = 0;
 151         rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 152         rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
 153         rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
 154         rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
 155
 156         rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 157         rt2x00_rf_write(rt2x00dev, word, value);
 158 }
 159
 160 static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 161 {
 162         struct rt2x00_dev *rt2x00dev = eeprom->data;
 163         u32 reg;
 164
 165         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
 166
 167         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
 168         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
 169         eeprom->reg_data_clock =
 170             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
 171         eeprom->reg_chip_select =
 172             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
 173 }
 174
 175 static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 176 {
 177         struct rt2x00_dev *rt2x00dev = eeprom->data;
 178         u32 reg = 0;
 179
 180         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
 181         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
 182         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
 183                            !!eeprom->reg_data_clock);
 184         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
 185                            !!eeprom->reg_chip_select);
 186
 187         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
 188 }
 189
 190 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 191 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 192
 193 static void rt2400pci_read_csr(struct rt2x00_dev *rt2x00dev,
 194                                const unsigned int word, u32 *data)
 195 {
 196         rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
 197 }
 198
 199 static void rt2400pci_write_csr(struct rt2x00_dev *rt2x00dev,
 200                                 const unsigned int word, u32 data)
 201 {
 202         rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
 203 }
 204
 205 static const struct rt2x00debug rt2400pci_rt2x00debug = {
 206         .owner  = THIS_MODULE,
 207         .csr    = {
 208                 .read           = rt2400pci_read_csr,
 209                 .write          = rt2400pci_write_csr,
 210                 .word_size      = sizeof(u32),
 211                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 212         },
 213         .eeprom = {
 214                 .read           = rt2x00_eeprom_read,
 215                 .write          = rt2x00_eeprom_write,
 216                 .word_size      = sizeof(u16),
 217                 .word_count     = EEPROM_SIZE / sizeof(u16),
 218         },
 219         .bbp    = {
 220                 .read           = rt2400pci_bbp_read,
 221                 .write          = rt2400pci_bbp_write,
 222                 .word_size      = sizeof(u8),
 223                 .word_count     = BBP_SIZE / sizeof(u8),
 224         },
 225         .rf     = {
 226                 .read           = rt2x00_rf_read,
 227                 .write          = rt2400pci_rf_write,
 228                 .word_size      = sizeof(u32),
 229                 .word_count     = RF_SIZE / sizeof(u32),
 230         },
 231 };
 232 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 233
 234 #ifdef CONFIG_RT2400PCI_RFKILL
 235 static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 236 {
 237         u32 reg;
 238
 239         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 240         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 241 }
 242 #else
 243 #define rt2400pci_rfkill_poll   NULL
 244 #endif /* CONFIG_RT2400PCI_RFKILL */
 245
 246 /*
 247  * Configuration handlers.
 248  */
 249 static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev,
 250                                       __le32 *mac)
 251 {
 252         rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac,
 253                                       (2 * sizeof(__le32)));
 254 }
 255
 256 static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev,
 257                                    __le32 *bssid)
 258 {
 259         rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid,
 260                                       (2 * sizeof(__le32)));
 261 }
 262
 263 static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, const int type,
 264                                   const int tsf_sync)
 265 {
 266         u32 reg;
 267
 268         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
 269
 270         /*
 271          * Enable beacon config
 272          */
 273         rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
 274         rt2x00_set_field32(&reg, BCNCSR1_PRELOAD,
 275                            PREAMBLE + get_duration(IEEE80211_HEADER, 20));
 276         rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
 277
 278         /*
 279          * Enable synchronisation.
 280          */
 281         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 282         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
 283         rt2x00_set_field32(&reg, CSR14_TBCN, (tsf_sync == TSF_SYNC_BEACON));
 284         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 285         rt2x00_set_field32(&reg, CSR14_TSF_SYNC, tsf_sync);
 286         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 287 }
 288
 289 static void rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev,
 290                                       const int short_preamble,
 291                                       const int ack_timeout,
 292                                       const int ack_consume_time)
 293 {
 294         int preamble_mask;
 295         u32 reg;
 296
 297         /*
 298          * When short preamble is enabled, we should set bit 0x08
 299          */
 300         preamble_mask = short_preamble << 3;
 301
 302         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 303         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, ack_timeout);
 304         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, ack_consume_time);
 305         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 306
 307         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
 308         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble_mask);
 309         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
 310         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
 311         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
 312
 313         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
 314         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
 315         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
 316         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
 317         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
 318
 319         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
 320         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
 321         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
 322         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
 323         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
 324
 325         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
 326         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
 327         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
 328         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
 329         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
 330 }
 331
 332 static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev,
 333                                      const int basic_rate_mask)
 334 {
 335         rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask);
 336 }
 337
 338 static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
 339                                      struct rf_channel *rf)
 340 {
 341         /*
 342          * Switch on tuning bits.
 343          */
 344         rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 345         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 346
 347         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
 348         rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
 349         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
 350
 351         /*
 352          * RF2420 chipset don't need any additional actions.
 353          */
 354         if (rt2x00_rf(&rt2x00dev->chip, RF2420))
 355                 return;
 356
 357         /*
 358          * For the RT2421 chipsets we need to write an invalid
 359          * reference clock rate to activate auto_tune.
 360          * After that we set the value back to the correct channel.
 361          */
 362         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
 363         rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32);
 364         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
 365
 366         msleep(1);
 367
 368         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
 369         rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
 370         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
 371
 372         msleep(1);
 373
 374         /*
 375          * Switch off tuning bits.
 376          */
 377         rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 378         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
 379
 380         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
 381         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
 382
 383         /*
 384          * Clear false CRC during channel switch.
 385          */
 386         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
 387 }
 388
 389 static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
 390 {
 391         rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower));
 392 }
 393
 394 static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 395                                      struct antenna_setup *ant)
 396 {
 397         u8 r1;
 398         u8 r4;
 399
 400         rt2400pci_bbp_read(rt2x00dev, 4, &r4);
 401         rt2400pci_bbp_read(rt2x00dev, 1, &r1);
 402
 403         /*
 404          * Configure the TX antenna.
 405          */
 406         switch (ant->tx) {
 407         case ANTENNA_HW_DIVERSITY:
 408                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1);
 409                 break;
 410         case ANTENNA_A:
 411                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0);
 412                 break;
 413         case ANTENNA_SW_DIVERSITY:
 414                 /*
 415                  * NOTE: We should never come here because rt2x00lib is
 416                  * supposed to catch this and send us the correct antenna
 417                  * explicitely. However we are nog going to bug about this.
 418                  * Instead, just default to antenna B.
 419                  */
 420         case ANTENNA_B:
 421                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2);
 422                 break;
 423         }
 424
 425         /*
 426          * Configure the RX antenna.
 427          */
 428         switch (ant->rx) {
 429         case ANTENNA_HW_DIVERSITY:
 430                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
 431                 break;
 432         case ANTENNA_A:
 433                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0);
 434                 break;
 435         case ANTENNA_SW_DIVERSITY:
 436                 /*
 437                  * NOTE: We should never come here because rt2x00lib is
 438                  * supposed to catch this and send us the correct antenna
 439                  * explicitely. However we are nog going to bug about this.
 440                  * Instead, just default to antenna B.
 441                  */
 442         case ANTENNA_B:
 443                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
 444                 break;
 445         }
 446
 447         rt2400pci_bbp_write(rt2x00dev, 4, r4);
 448         rt2400pci_bbp_write(rt2x00dev, 1, r1);
 449 }
 450
 451 static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
 452                                       struct rt2x00lib_conf *libconf)
 453 {
 454         u32 reg;
 455
 456         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 457         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, libconf->slot_time);
 458         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 459
 460         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 461         rt2x00_set_field32(&reg, CSR18_SIFS, libconf->sifs);
 462         rt2x00_set_field32(&reg, CSR18_PIFS, libconf->pifs);
 463         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
 464
 465         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
 466         rt2x00_set_field32(&reg, CSR19_DIFS, libconf->difs);
 467         rt2x00_set_field32(&reg, CSR19_EIFS, libconf->eifs);
 468         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
 469
 470         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 471         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 472         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 473         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 474
 475         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
 476         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
 477                            libconf->conf->beacon_int * 16);
 478         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
 479                            libconf->conf->beacon_int * 16);
 480         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
 481 }
 482
 483 static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
 484                              const unsigned int flags,
 485                              struct rt2x00lib_conf *libconf)
 486 {
 487         if (flags & CONFIG_UPDATE_PHYMODE)
 488                 rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates);
 489         if (flags & CONFIG_UPDATE_CHANNEL)
 490                 rt2400pci_config_channel(rt2x00dev, &libconf->rf);
 491         if (flags & CONFIG_UPDATE_TXPOWER)
 492                 rt2400pci_config_txpower(rt2x00dev,
 493                                          libconf->conf->power_level);
 494         if (flags & CONFIG_UPDATE_ANTENNA)
 495                 rt2400pci_config_antenna(rt2x00dev, &libconf->ant);
 496         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 497                 rt2400pci_config_duration(rt2x00dev, libconf);
 498 }
 499
 500 static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
 501                                 struct ieee80211_tx_queue_params *params)
 502 {
 503         u32 reg;
 504
 505         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 506         rt2x00_set_field32(&reg, CSR11_CWMIN, params->cw_min);
 507         rt2x00_set_field32(&reg, CSR11_CWMAX, params->cw_max);
 508         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 509 }
 510
 511 /*
 512  * LED functions.
 513  */
 514 static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev)
 515 {
 516         u32 reg;
 517
 518         rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
 519
 520         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
 521         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
 522         rt2x00_set_field32(&reg, LEDCSR_LINK,
 523                            (rt2x00dev->led_mode != LED_MODE_ASUS));
 524         rt2x00_set_field32(&reg, LEDCSR_ACTIVITY,
 525                            (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY));
 526         rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
 527 }
 528
 529 static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev)
 530 {
 531         u32 reg;
 532
 533         rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
 534         rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
 535         rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
 536         rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
 537 }
 538
 539 /*
 540  * Link tuning
 541  */
 542 static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev,
 543                                  struct link_qual *qual)
 544 {
 545         u32 reg;
 546         u8 bbp;
 547
 548         /*
 549          * Update FCS error count from register.
 550          */
 551         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 552         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
 553
 554         /*
 555          * Update False CCA count from register.
 556          */
 557         rt2400pci_bbp_read(rt2x00dev, 39, &bbp);
 558         qual->false_cca = bbp;
 559 }
 560
 561 static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
 562 {
 563         rt2400pci_bbp_write(rt2x00dev, 13, 0x08);
 564         rt2x00dev->link.vgc_level = 0x08;
 565 }
 566
 567 static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 568 {
 569         u8 reg;
 570
 571         /*
 572          * The link tuner should not run longer then 60 seconds,
 573          * and should run once every 2 seconds.
 574          */
 575         if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1))
 576                 return;
 577
 578         /*
 579          * Base r13 link tuning on the false cca count.
 580          */
 581         rt2400pci_bbp_read(rt2x00dev, 13, &reg);
 582
 583         if (rt2x00dev->link.qual.false_cca > 512 && reg < 0x20) {
 584                 rt2400pci_bbp_write(rt2x00dev, 13, ++reg);
 585                 rt2x00dev->link.vgc_level = reg;
 586         } else if (rt2x00dev->link.qual.false_cca < 100 && reg > 0x08) {
 587                 rt2400pci_bbp_write(rt2x00dev, 13, --reg);
 588                 rt2x00dev->link.vgc_level = reg;
 589         }
 590 }
 591
 592 /*
 593  * Initialization functions.
 594  */
 595 static void rt2400pci_init_rxring(struct rt2x00_dev *rt2x00dev)
 596 {
 597         struct data_ring *ring = rt2x00dev->rx;
 598         __le32 *rxd;
 599         unsigned int i;
 600         u32 word;
 601
 602         memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
 603
 604         for (i = 0; i < ring->stats.limit; i++) {
 605                 rxd = ring->entry[i].priv;
 606
 607                 rt2x00_desc_read(rxd, 2, &word);
 608                 rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
 609                                    ring->data_size);
 610                 rt2x00_desc_write(rxd, 2, word);
 611
 612                 rt2x00_desc_read(rxd, 1, &word);
 613                 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS,
 614                                    ring->entry[i].data_dma);
 615                 rt2x00_desc_write(rxd, 1, word);
 616
 617                 rt2x00_desc_read(rxd, 0, &word);
 618                 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 619                 rt2x00_desc_write(rxd, 0, word);
 620         }
 621
 622         rt2x00_ring_index_clear(rt2x00dev->rx);
 623 }
 624
 625 static void rt2400pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
 626 {
 627         struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
 628         __le32 *txd;
 629         unsigned int i;
 630         u32 word;
 631
 632         memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
 633
 634         for (i = 0; i < ring->stats.limit; i++) {
 635                 txd = ring->entry[i].priv;
 636
 637                 rt2x00_desc_read(txd, 1, &word);
 638                 rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS,
 639                                    ring->entry[i].data_dma);
 640                 rt2x00_desc_write(txd, 1, word);
 641
 642                 rt2x00_desc_read(txd, 2, &word);
 643                 rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH,
 644                                    ring->data_size);
 645                 rt2x00_desc_write(txd, 2, word);
 646
 647                 rt2x00_desc_read(txd, 0, &word);
 648                 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 649                 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
 650                 rt2x00_desc_write(txd, 0, word);
 651         }
 652
 653         rt2x00_ring_index_clear(ring);
 654 }
 655
 656 static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev)
 657 {
 658         u32 reg;
 659
 660         /*
 661          * Initialize rings.
 662          */
 663         rt2400pci_init_rxring(rt2x00dev);
 664         rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
 665         rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
 666         rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
 667         rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
 668
 669         /*
 670          * Initialize registers.
 671          */
 672         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
 673         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE,
 674                            rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size);
 675         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD,
 676                            rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
 677         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM,
 678                            rt2x00dev->bcn[1].stats.limit);
 679         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO,
 680                            rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
 681         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
 682
 683         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
 684         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
 685                            rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
 686         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
 687
 688         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
 689         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
 690                            rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
 691         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
 692
 693         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
 694         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
 695                            rt2x00dev->bcn[1].data_dma);
 696         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
 697
 698         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
 699         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
 700                            rt2x00dev->bcn[0].data_dma);
 701         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
 702
 703         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
 704         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
 705         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit);
 706         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
 707
 708         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
 709         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
 710                            rt2x00dev->rx->data_dma);
 711         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
 712
 713         return 0;
 714 }
 715
 716 static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
 717 {
 718         u32 reg;
 719
 720         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
 721         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
 722         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20);
 723         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
 724
 725         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
 726         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
 727         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
 728         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
 729         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
 730
 731         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
 732         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
 733                            (rt2x00dev->rx->data_size / 128));
 734         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 735
 736         rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
 737
 738         rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);
 739         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA0, 133);
 740         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID0, 134);
 741         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA1, 136);
 742         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID1, 135);
 743         rt2x00pci_register_write(rt2x00dev, ARCSR0, reg);
 744
 745         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
 746         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 3); /* Tx power.*/
 747         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
 748         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 32); /* Signal */
 749         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
 750         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 36); /* Rssi */
 751         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
 752         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
 753
 754         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
 755
 756         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 757                 return -EBUSY;
 758
 759         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223);
 760         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
 761
 762         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
 763         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
 764         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
 765
 766         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
 767         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
 768         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 154);
 769         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
 770         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 154);
 771         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
 772
 773         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 774         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
 775         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
 776         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
 777         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 778
 779         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 780         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
 781         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
 782         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 783
 784         /*
 785          * We must clear the FCS and FIFO error count.
 786          * These registers are cleared on read,
 787          * so we may pass a useless variable to store the value.
 788          */
 789         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 790         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
 791
 792         return 0;
 793 }
 794
 795 static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 796 {
 797         unsigned int i;
 798         u16 eeprom;
 799         u8 reg_id;
 800         u8 value;
 801
 802         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 803                 rt2400pci_bbp_read(rt2x00dev, 0, &value);
 804                 if ((value != 0xff) && (value != 0x00))
 805                         goto continue_csr_init;
 806                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
 807                 udelay(REGISTER_BUSY_DELAY);
 808         }
 809
 810         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 811         return -EACCES;
 812
 813 continue_csr_init:
 814         rt2400pci_bbp_write(rt2x00dev, 1, 0x00);
 815         rt2400pci_bbp_write(rt2x00dev, 3, 0x27);
 816         rt2400pci_bbp_write(rt2x00dev, 4, 0x08);
 817         rt2400pci_bbp_write(rt2x00dev, 10, 0x0f);
 818         rt2400pci_bbp_write(rt2x00dev, 15, 0x72);
 819         rt2400pci_bbp_write(rt2x00dev, 16, 0x74);
 820         rt2400pci_bbp_write(rt2x00dev, 17, 0x20);
 821         rt2400pci_bbp_write(rt2x00dev, 18, 0x72);
 822         rt2400pci_bbp_write(rt2x00dev, 19, 0x0b);
 823         rt2400pci_bbp_write(rt2x00dev, 20, 0x00);
 824         rt2400pci_bbp_write(rt2x00dev, 28, 0x11);
 825         rt2400pci_bbp_write(rt2x00dev, 29, 0x04);
 826         rt2400pci_bbp_write(rt2x00dev, 30, 0x21);
 827         rt2400pci_bbp_write(rt2x00dev, 31, 0x00);
 828
 829         DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
 830         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 831                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 832
 833                 if (eeprom != 0xffff && eeprom != 0x0000) {
 834                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 835                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 836                         DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
 837                               reg_id, value);
 838                         rt2400pci_bbp_write(rt2x00dev, reg_id, value);
 839                 }
 840         }
 841         DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
 842
 843         return 0;
 844 }
 845
 846 /*
 847  * Device state switch handlers.
 848  */
 849 static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 850                                 enum dev_state state)
 851 {
 852         u32 reg;
 853
 854         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 855         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
 856                            state == STATE_RADIO_RX_OFF);
 857         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 858 }
 859
 860 static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 861                                  enum dev_state state)
 862 {
 863         int mask = (state == STATE_RADIO_IRQ_OFF);
 864         u32 reg;
 865
 866         /*
 867          * When interrupts are being enabled, the interrupt registers
 868          * should clear the register to assure a clean state.
 869          */
 870         if (state == STATE_RADIO_IRQ_ON) {
 871                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
 872                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
 873         }
 874
 875         /*
 876          * Only toggle the interrupts bits we are going to use.
 877          * Non-checked interrupt bits are disabled by default.
 878          */
 879         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
 880         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
 881         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
 882         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
 883         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
 884         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
 885         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
 886 }
 887
 888 static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 889 {
 890         /*
 891          * Initialize all registers.
 892          */
 893         if (rt2400pci_init_rings(rt2x00dev) ||
 894             rt2400pci_init_registers(rt2x00dev) ||
 895             rt2400pci_init_bbp(rt2x00dev)) {
 896                 ERROR(rt2x00dev, "Register initialization failed.\n");
 897                 return -EIO;
 898         }
 899
 900         /*
 901          * Enable interrupts.
 902          */
 903         rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
 904
 905         /*
 906          * Enable LED
 907          */
 908         rt2400pci_enable_led(rt2x00dev);
 909
 910         return 0;
 911 }
 912
 913 static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 914 {
 915         u32 reg;
 916
 917         /*
 918          * Disable LED
 919          */
 920         rt2400pci_disable_led(rt2x00dev);
 921
 922         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
 923
 924         /*
 925          * Disable synchronisation.
 926          */
 927         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
 928
 929         /*
 930          * Cancel RX and TX.
 931          */
 932         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
 933         rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
 934         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
 935
 936         /*
 937          * Disable interrupts.
 938          */
 939         rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
 940 }
 941
 942 static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
 943                                enum dev_state state)
 944 {
 945         u32 reg;
 946         unsigned int i;
 947         char put_to_sleep;
 948         char bbp_state;
 949         char rf_state;
 950
 951         put_to_sleep = (state != STATE_AWAKE);
 952
 953         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
 954         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
 955         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
 956         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
 957         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
 958         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
 959
 960         /*
 961          * Device is not guaranteed to be in the requested state yet.
 962          * We must wait until the register indicates that the
 963          * device has entered the correct state.
 964          */
 965         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 966                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
 967                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
 968                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
 969                 if (bbp_state == state && rf_state == state)
 970                         return 0;
 971                 msleep(10);
 972         }
 973
 974         NOTICE(rt2x00dev, "Device failed to enter state %d, "
 975                "current device state: bbp %d and rf %d.\n",
 976                state, bbp_state, rf_state);
 977
 978         return -EBUSY;
 979 }
 980
 981 static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 982                                       enum dev_state state)
 983 {
 984         int retval = 0;
 985
 986         switch (state) {
 987         case STATE_RADIO_ON:
 988                 retval = rt2400pci_enable_radio(rt2x00dev);
 989                 break;
 990         case STATE_RADIO_OFF:
 991                 rt2400pci_disable_radio(rt2x00dev);
 992                 break;
 993         case STATE_RADIO_RX_ON:
 994         case STATE_RADIO_RX_OFF:
 995                 rt2400pci_toggle_rx(rt2x00dev, state);
 996                 break;
 997         case STATE_DEEP_SLEEP:
 998         case STATE_SLEEP:
 999         case STATE_STANDBY:
1000         case STATE_AWAKE:
1001                 retval = rt2400pci_set_state(rt2x00dev, state);
1002                 break;
1003         default:
1004                 retval = -ENOTSUPP;
1005                 break;
1006         }
1007
1008         return retval;
1009 }
1010
1011 /*
1012  * TX descriptor initialization
1013  */
1014 static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1015                                     __le32 *txd,
1016                                     struct txdata_entry_desc *desc,
1017                                     struct ieee80211_hdr *ieee80211hdr,
1018                                     unsigned int length,
1019                                     struct ieee80211_tx_control *control)
1020 {
1021         u32 word;
1022
1023         /*
1024          * Start writing the descriptor words.
1025          */
1026         rt2x00_desc_read(txd, 2, &word);
1027         rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, length);
1028         rt2x00_desc_write(txd, 2, word);
1029
1030         rt2x00_desc_read(txd, 3, &word);
1031         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal);
1032         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5);
1033         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1);
1034         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service);
1035         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6);
1036         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1);
1037         rt2x00_desc_write(txd, 3, word);
1038
1039         rt2x00_desc_read(txd, 4, &word);
1040         rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, desc->length_low);
1041         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8);
1042         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1);
1043         rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, desc->length_high);
1044         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7);
1045         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1);
1046         rt2x00_desc_write(txd, 4, word);
1047
1048         rt2x00_desc_read(txd, 0, &word);
1049         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1050         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1051         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1052                            test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1053         rt2x00_set_field32(&word, TXD_W0_ACK,
1054                            test_bit(ENTRY_TXD_ACK, &desc->flags));
1055         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1056                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1057         rt2x00_set_field32(&word, TXD_W0_RTS,
1058                            test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags));
1059         rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1060         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1061                            !!(control->flags &
1062                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1063         rt2x00_desc_write(txd, 0, word);
1064 }
1065
1066 /*
1067  * TX data initialization
1068  */
1069 static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1070                                     unsigned int queue)
1071 {
1072         u32 reg;
1073
1074         if (queue == IEEE80211_TX_QUEUE_BEACON) {
1075                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1076                 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1077                         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1078                         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1079                 }
1080                 return;
1081         }
1082
1083         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1084         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO,
1085                            (queue == IEEE80211_TX_QUEUE_DATA0));
1086         rt2x00_set_field32(&reg, TXCSR0_KICK_TX,
1087                            (queue == IEEE80211_TX_QUEUE_DATA1));
1088         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM,
1089                            (queue == IEEE80211_TX_QUEUE_AFTER_BEACON));
1090         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1091 }
1092
1093 /*
1094  * RX control handlers
1095  */
1096 static void rt2400pci_fill_rxdone(struct data_entry *entry,
1097                                   struct rxdata_entry_desc *desc)
1098 {
1099         __le32 *rxd = entry->priv;
1100         u32 word0;
1101         u32 word2;
1102
1103         rt2x00_desc_read(rxd, 0, &word0);
1104         rt2x00_desc_read(rxd, 2, &word2);
1105
1106         desc->flags = 0;
1107         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1108                 desc->flags |= RX_FLAG_FAILED_FCS_CRC;
1109         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1110                 desc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1111
1112         /*
1113          * Obtain the status about this packet.
1114          */
1115         desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1116         desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1117             entry->ring->rt2x00dev->rssi_offset;
1118         desc->ofdm = 0;
1119         desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1120 }
1121
1122 /*
1123  * Interrupt functions.
1124  */
1125 static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue)
1126 {
1127         struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
1128         struct data_entry *entry;
1129         __le32 *txd;
1130         u32 word;
1131         int tx_status;
1132         int retry;
1133
1134         while (!rt2x00_ring_empty(ring)) {
1135                 entry = rt2x00_get_data_entry_done(ring);
1136                 txd = entry->priv;
1137                 rt2x00_desc_read(txd, 0, &word);
1138
1139                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1140                     !rt2x00_get_field32(word, TXD_W0_VALID))
1141                         break;
1142
1143                 /*
1144                  * Obtain the status about this packet.
1145                  */
1146                 tx_status = rt2x00_get_field32(word, TXD_W0_RESULT);
1147                 retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1148
1149                 rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry);
1150         }
1151 }
1152
1153 static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
1154 {
1155         struct rt2x00_dev *rt2x00dev = dev_instance;
1156         u32 reg;
1157
1158         /*
1159          * Get the interrupt sources & saved to local variable.
1160          * Write register value back to clear pending interrupts.
1161          */
1162         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1163         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1164
1165         if (!reg)
1166                 return IRQ_NONE;
1167
1168         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1169                 return IRQ_HANDLED;
1170
1171         /*
1172          * Handle interrupts, walk through all bits
1173          * and run the tasks, the bits are checked in order of
1174          * priority.
1175          */
1176
1177         /*
1178          * 1 - Beacon timer expired interrupt.
1179          */
1180         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1181                 rt2x00lib_beacondone(rt2x00dev);
1182
1183         /*
1184          * 2 - Rx ring done interrupt.
1185          */
1186         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1187                 rt2x00pci_rxdone(rt2x00dev);
1188
1189         /*
1190          * 3 - Atim ring transmit done interrupt.
1191          */
1192         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1193                 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
1194
1195         /*
1196          * 4 - Priority ring transmit done interrupt.
1197          */
1198         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1199                 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1200
1201         /*
1202          * 5 - Tx ring transmit done interrupt.
1203          */
1204         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1205                 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1206
1207         return IRQ_HANDLED;
1208 }
1209
1210 /*
1211  * Device probe functions.
1212  */
1213 static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1214 {
1215         struct eeprom_93cx6 eeprom;
1216         u32 reg;
1217         u16 word;
1218         u8 *mac;
1219
1220         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1221
1222         eeprom.data = rt2x00dev;
1223         eeprom.register_read = rt2400pci_eepromregister_read;
1224         eeprom.register_write = rt2400pci_eepromregister_write;
1225         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1226             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1227         eeprom.reg_data_in = 0;
1228         eeprom.reg_data_out = 0;
1229         eeprom.reg_data_clock = 0;
1230         eeprom.reg_chip_select = 0;
1231
1232         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1233                                EEPROM_SIZE / sizeof(u16));
1234
1235         /*
1236          * Start validation of the data that has been read.
1237          */
1238         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1239         if (!is_valid_ether_addr(mac)) {
1240                 DECLARE_MAC_BUF(macbuf);
1241
1242                 random_ether_addr(mac);
1243                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1244         }
1245
1246         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1247         if (word == 0xffff) {
1248                 ERROR(rt2x00dev, "Invalid EEPROM data detected.\n");
1249                 return -EINVAL;
1250         }
1251
1252         return 0;
1253 }
1254
1255 static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1256 {
1257         u32 reg;
1258         u16 value;
1259         u16 eeprom;
1260
1261         /*
1262          * Read EEPROM word for configuration.
1263          */
1264         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1265
1266         /*
1267          * Identify RF chipset.
1268          */
1269         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1270         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1271         rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
1272
1273         if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
1274             !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
1275                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1276                 return -ENODEV;
1277         }
1278
1279         /*
1280          * Identify default antenna configuration.
1281          */
1282         rt2x00dev->default_ant.tx =
1283             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1284         rt2x00dev->default_ant.rx =
1285             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1286
1287         /*
1288          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1289          * I am not 100% sure about this, but the legacy drivers do not
1290          * indicate antenna swapping in software is required when
1291          * diversity is enabled.
1292          */
1293         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1294                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1295         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1296                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1297
1298         /*
1299          * Store led mode, for correct led behaviour.
1300          */
1301         rt2x00dev->led_mode =
1302             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1303
1304         /*
1305          * Detect if this device has an hardware controlled radio.
1306          */
1307 #ifdef CONFIG_RT2400PCI_RFKILL
1308         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1309                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1310 #endif /* CONFIG_RT2400PCI_RFKILL */
1311
1312         /*
1313          * Check if the BBP tuning should be enabled.
1314          */
1315         if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
1316                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1317
1318         return 0;
1319 }
1320
1321 /*
1322  * RF value list for RF2420 & RF2421
1323  * Supports: 2.4 GHz
1324  */
1325 static const struct rf_channel rf_vals_bg[] = {
1326         { 1,  0x00022058, 0x000c1fda, 0x00000101, 0 },
1327         { 2,  0x00022058, 0x000c1fee, 0x00000101, 0 },
1328         { 3,  0x00022058, 0x000c2002, 0x00000101, 0 },
1329         { 4,  0x00022058, 0x000c2016, 0x00000101, 0 },
1330         { 5,  0x00022058, 0x000c202a, 0x00000101, 0 },
1331         { 6,  0x00022058, 0x000c203e, 0x00000101, 0 },
1332         { 7,  0x00022058, 0x000c2052, 0x00000101, 0 },
1333         { 8,  0x00022058, 0x000c2066, 0x00000101, 0 },
1334         { 9,  0x00022058, 0x000c207a, 0x00000101, 0 },
1335         { 10, 0x00022058, 0x000c208e, 0x00000101, 0 },
1336         { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 },
1337         { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 },
1338         { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 },
1339         { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
1340 };
1341
1342 static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1343 {
1344         struct hw_mode_spec *spec = &rt2x00dev->spec;
1345         u8 *txpower;
1346         unsigned int i;
1347
1348         /*
1349          * Initialize all hw fields.
1350          */
1351         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1352         rt2x00dev->hw->extra_tx_headroom = 0;
1353         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1354         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1355         rt2x00dev->hw->queues = 2;
1356
1357         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1358         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1359                                 rt2x00_eeprom_addr(rt2x00dev,
1360                                                    EEPROM_MAC_ADDR_0));
1361
1362         /*
1363          * Convert tx_power array in eeprom.
1364          */
1365         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1366         for (i = 0; i < 14; i++)
1367                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1368
1369         /*
1370          * Initialize hw_mode information.
1371          */
1372         spec->num_modes = 1;
1373         spec->num_rates = 4;
1374         spec->tx_power_a = NULL;
1375         spec->tx_power_bg = txpower;
1376         spec->tx_power_default = DEFAULT_TXPOWER;
1377
1378         spec->num_channels = ARRAY_SIZE(rf_vals_bg);
1379         spec->channels = rf_vals_bg;
1380 }
1381
1382 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1383 {
1384         int retval;
1385
1386         /*
1387          * Allocate eeprom data.
1388          */
1389         retval = rt2400pci_validate_eeprom(rt2x00dev);
1390         if (retval)
1391                 return retval;
1392
1393         retval = rt2400pci_init_eeprom(rt2x00dev);
1394         if (retval)
1395                 return retval;
1396
1397         /*
1398          * Initialize hw specifications.
1399          */
1400         rt2400pci_probe_hw_mode(rt2x00dev);
1401
1402         /*
1403          * This device requires the beacon ring
1404          */
1405         __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
1406
1407         /*
1408          * Set the rssi offset.
1409          */
1410         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1411
1412         return 0;
1413 }
1414
1415 /*
1416  * IEEE80211 stack callback functions.
1417  */
1418 static void rt2400pci_configure_filter(struct ieee80211_hw *hw,
1419                                        unsigned int changed_flags,
1420                                        unsigned int *total_flags,
1421                                        int mc_count,
1422                                        struct dev_addr_list *mc_list)
1423 {
1424         struct rt2x00_dev *rt2x00dev = hw->priv;
1425         struct interface *intf = &rt2x00dev->interface;
1426         u32 reg;
1427
1428         /*
1429          * Mask off any flags we are going to ignore from
1430          * the total_flags field.
1431          */
1432         *total_flags &=
1433             FIF_ALLMULTI |
1434             FIF_FCSFAIL |
1435             FIF_PLCPFAIL |
1436             FIF_CONTROL |
1437             FIF_OTHER_BSS |
1438             FIF_PROMISC_IN_BSS;
1439
1440         /*
1441          * Apply some rules to the filters:
1442          * - Some filters imply different filters to be set.
1443          * - Some things we can't filter out at all.
1444          * - Some filters are set based on interface type.
1445          */
1446         *total_flags |= FIF_ALLMULTI;
1447         if (*total_flags & FIF_OTHER_BSS ||
1448             *total_flags & FIF_PROMISC_IN_BSS)
1449                 *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
1450         if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
1451                 *total_flags |= FIF_PROMISC_IN_BSS;
1452
1453         /*
1454          * Check if there is any work left for us.
1455          */
1456         if (intf->filter == *total_flags)
1457                 return;
1458         intf->filter = *total_flags;
1459
1460         /*
1461          * Start configuration steps.
1462          * Note that the version error will always be dropped
1463          * since there is no filter for it at this time.
1464          */
1465         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1466         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
1467                            !(*total_flags & FIF_FCSFAIL));
1468         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
1469                            !(*total_flags & FIF_PLCPFAIL));
1470         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
1471                            !(*total_flags & FIF_CONTROL));
1472         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
1473                            !(*total_flags & FIF_PROMISC_IN_BSS));
1474         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
1475                            !(*total_flags & FIF_PROMISC_IN_BSS));
1476         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
1477         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1478 }
1479
1480 static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw,
1481                                      u32 short_retry, u32 long_retry)
1482 {
1483         struct rt2x00_dev *rt2x00dev = hw->priv;
1484         u32 reg;
1485
1486         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1487         rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1488         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1489         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1490
1491         return 0;
1492 }
1493
1494 static int rt2400pci_conf_tx(struct ieee80211_hw *hw,
1495                              int queue,
1496                              const struct ieee80211_tx_queue_params *params)
1497 {
1498         struct rt2x00_dev *rt2x00dev = hw->priv;
1499
1500         /*
1501          * We don't support variating cw_min and cw_max variables
1502          * per queue. So by default we only configure the TX queue,
1503          * and ignore all other configurations.
1504          */
1505         if (queue != IEEE80211_TX_QUEUE_DATA0)
1506                 return -EINVAL;
1507
1508         if (rt2x00mac_conf_tx(hw, queue, params))
1509                 return -EINVAL;
1510
1511         /*
1512          * Write configuration to register.
1513          */
1514         rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params);
1515
1516         return 0;
1517 }
1518
1519 static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
1520 {
1521         struct rt2x00_dev *rt2x00dev = hw->priv;
1522         u64 tsf;
1523         u32 reg;
1524
1525         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1526         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1527         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1528         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1529
1530         return tsf;
1531 }
1532
1533 static void rt2400pci_reset_tsf(struct ieee80211_hw *hw)
1534 {
1535         struct rt2x00_dev *rt2x00dev = hw->priv;
1536
1537         rt2x00pci_register_write(rt2x00dev, CSR16, 0);
1538         rt2x00pci_register_write(rt2x00dev, CSR17, 0);
1539 }
1540
1541 static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
1542 {
1543         struct rt2x00_dev *rt2x00dev = hw->priv;
1544         u32 reg;
1545
1546         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1547         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1548 }
1549
1550 static const struct ieee80211_ops rt2400pci_mac80211_ops = {
1551         .tx                     = rt2x00mac_tx,
1552         .start                  = rt2x00mac_start,
1553         .stop                   = rt2x00mac_stop,
1554         .add_interface          = rt2x00mac_add_interface,
1555         .remove_interface       = rt2x00mac_remove_interface,
1556         .config                 = rt2x00mac_config,
1557         .config_interface       = rt2x00mac_config_interface,
1558         .configure_filter       = rt2400pci_configure_filter,
1559         .get_stats              = rt2x00mac_get_stats,
1560         .set_retry_limit        = rt2400pci_set_retry_limit,
1561         .erp_ie_changed         = rt2x00mac_erp_ie_changed,
1562         .conf_tx                = rt2400pci_conf_tx,
1563         .get_tx_stats           = rt2x00mac_get_tx_stats,
1564         .get_tsf                = rt2400pci_get_tsf,
1565         .reset_tsf              = rt2400pci_reset_tsf,
1566         .beacon_update          = rt2x00pci_beacon_update,
1567         .tx_last_beacon         = rt2400pci_tx_last_beacon,
1568 };
1569
1570 static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
1571         .irq_handler            = rt2400pci_interrupt,
1572         .probe_hw               = rt2400pci_probe_hw,
1573         .initialize             = rt2x00pci_initialize,
1574         .uninitialize           = rt2x00pci_uninitialize,
1575         .set_device_state       = rt2400pci_set_device_state,
1576         .rfkill_poll            = rt2400pci_rfkill_poll,
1577         .link_stats             = rt2400pci_link_stats,
1578         .reset_tuner            = rt2400pci_reset_tuner,
1579         .link_tuner             = rt2400pci_link_tuner,
1580         .write_tx_desc          = rt2400pci_write_tx_desc,
1581         .write_tx_data          = rt2x00pci_write_tx_data,
1582         .kick_tx_queue          = rt2400pci_kick_tx_queue,
1583         .fill_rxdone            = rt2400pci_fill_rxdone,
1584         .config_mac_addr        = rt2400pci_config_mac_addr,
1585         .config_bssid           = rt2400pci_config_bssid,
1586         .config_type            = rt2400pci_config_type,
1587         .config_preamble        = rt2400pci_config_preamble,
1588         .config                 = rt2400pci_config,
1589 };
1590
1591 static const struct rt2x00_ops rt2400pci_ops = {
1592         .name           = KBUILD_MODNAME,
1593         .rxd_size       = RXD_DESC_SIZE,
1594         .txd_size       = TXD_DESC_SIZE,
1595         .eeprom_size    = EEPROM_SIZE,
1596         .rf_size        = RF_SIZE,
1597         .lib            = &rt2400pci_rt2x00_ops,
1598         .hw             = &rt2400pci_mac80211_ops,
1599 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1600         .debugfs        = &rt2400pci_rt2x00debug,
1601 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1602 };
1603
1604 /*
1605  * RT2400pci module information.
1606  */
1607 static struct pci_device_id rt2400pci_device_table[] = {
1608         { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
1609         { 0, }
1610 };
1611
1612 MODULE_AUTHOR(DRV_PROJECT);
1613 MODULE_VERSION(DRV_VERSION);
1614 MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver.");
1615 MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
1616 MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
1617 MODULE_LICENSE("GPL");
1618
1619 static struct pci_driver rt2400pci_driver = {
1620         .name           = KBUILD_MODNAME,
1621         .id_table       = rt2400pci_device_table,
1622         .probe          = rt2x00pci_probe,
1623         .remove         = __devexit_p(rt2x00pci_remove),
1624         .suspend        = rt2x00pci_suspend,
1625         .resume         = rt2x00pci_resume,
1626 };
1627
1628 static int __init rt2400pci_init(void)
1629 {
1630         return pci_register_driver(&rt2400pci_driver);
1631 }
1632
1633 static void __exit rt2400pci_exit(void)
1634 {
1635         pci_unregister_driver(&rt2400pci_driver);
1636 }
1637
1638 module_init(rt2400pci_init);
1639 module_exit(rt2400pci_exit);