2 tristate "Ralink driver support"
5 This will enable the support for the Ralink drivers,
6 developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
8 These drivers make use of the mac80211 stack.
10 When building one of the individual drivers, the rt2x00 library
11 will also be created. That library (when the driver is built as
12 a module) will be called rt2x00lib.
14 Additionally PCI and USB libraries will also be build depending
15 on the types of drivers being selected, these libraries will be
16 called rt2x00pci and rt2x00usb.
21 tristate "Ralink rt2400 (PCI/PCMCIA) support"
26 This adds support for rt2400 wireless chipset family.
27 Supported chips: RT2460.
29 When compiled as a module, this driver will be called rt2400pci.
32 tristate "Ralink rt2500 (PCI/PCMCIA) support"
37 This adds support for rt2500 wireless chipset family.
38 Supported chips: RT2560.
40 When compiled as a module, this driver will be called rt2500pci.
43 tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
46 select RT2X00_LIB_FIRMWARE
47 select RT2X00_LIB_CRYPTO
51 This adds support for rt2501 wireless chipset family.
52 Supported chips: RT2561, RT2561S & RT2661.
54 When compiled as a module, this driver will be called rt61pci.
63 depends on RALINK_RT288X || RALINK_RT305X
67 tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)"
68 depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
70 select RT2X00_LIB_PCI if RT2800PCI_PCI
71 select RT2X00_LIB_SOC if RT2800PCI_SOC
73 select RT2X00_LIB_FIRMWARE
74 select RT2X00_LIB_CRYPTO
78 This adds support for rt2800 wireless chipset family.
79 Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
81 This driver is non-functional at the moment and is intended for
84 When compiled as a module, this driver will be called "rt2800pci.ko".
87 tristate "Ralink rt2500 (USB) support"
90 select RT2X00_LIB_CRYPTO
92 This adds support for rt2500 wireless chipset family.
93 Supported chips: RT2571 & RT2572.
95 When compiled as a module, this driver will be called rt2500usb.
98 tristate "Ralink rt2501/rt73 (USB) support"
100 select RT2X00_LIB_USB
101 select RT2X00_LIB_FIRMWARE
102 select RT2X00_LIB_CRYPTO
105 This adds support for rt2501 wireless chipset family.
106 Supported chips: RT2571W, RT2573 & RT2671.
108 When compiled as a module, this driver will be called rt73usb.
111 tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)"
112 depends on USB && EXPERIMENTAL
114 select RT2X00_LIB_USB
116 select RT2X00_LIB_FIRMWARE
117 select RT2X00_LIB_CRYPTO
120 This adds experimental support for rt2800 wireless chipset family.
121 Supported chips: RT2770, RT2870 & RT3070.
124 - support for RT2870 chips doesn't work with 802.11n APs yet
125 - support for RT3070 chips is non-functional at the moment
127 When compiled as a module, this driver will be called "rt2800usb.ko".
132 config RT2X00_LIB_PCI
136 config RT2X00_LIB_SOC
140 config RT2X00_LIB_USB
150 config RT2X00_LIB_FIRMWARE
154 config RT2X00_LIB_CRYPTO
157 config RT2X00_LIB_LEDS
159 default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
161 comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
162 depends on RT2X00_LIB=y && LEDS_CLASS=m
164 config RT2X00_LIB_DEBUGFS
165 bool "Ralink debugfs support"
166 depends on RT2X00_LIB && MAC80211_DEBUGFS
168 Enable creation of debugfs files for the rt2x00 drivers.
169 These debugfs files support both reading and writing of the
170 most important register types of the rt2x00 hardware.
173 bool "Ralink debug output"
174 depends on RT2X00_LIB
176 Enable debugging output for all rt2x00 modules