p54usb: fix stalls caused by urb allocation failures
[safe/jmp/linux-2.6] / drivers / net / wireless / p54 / eeprom.c
1 /*
2  * EEPROM parser code for mac80211 Prism54 drivers
3  *
4  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
5  * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
6  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
7  *
8  * Based on:
9  * - the islsm (softmac prism54) driver, which is:
10  *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
11  * - stlc45xx driver
12  *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18
19 #include <linux/init.h>
20 #include <linux/firmware.h>
21 #include <linux/etherdevice.h>
22
23 #include <net/mac80211.h>
24
25 #include "p54.h"
26 #include "eeprom.h"
27 #include "lmac.h"
28
29 static struct ieee80211_rate p54_bgrates[] = {
30         { .bitrate = 10, .hw_value = 0, },
31         { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
32         { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
33         { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
34         { .bitrate = 60, .hw_value = 4, },
35         { .bitrate = 90, .hw_value = 5, },
36         { .bitrate = 120, .hw_value = 6, },
37         { .bitrate = 180, .hw_value = 7, },
38         { .bitrate = 240, .hw_value = 8, },
39         { .bitrate = 360, .hw_value = 9, },
40         { .bitrate = 480, .hw_value = 10, },
41         { .bitrate = 540, .hw_value = 11, },
42 };
43
44 static struct ieee80211_channel p54_bgchannels[] = {
45         { .center_freq = 2412, .hw_value = 1, },
46         { .center_freq = 2417, .hw_value = 2, },
47         { .center_freq = 2422, .hw_value = 3, },
48         { .center_freq = 2427, .hw_value = 4, },
49         { .center_freq = 2432, .hw_value = 5, },
50         { .center_freq = 2437, .hw_value = 6, },
51         { .center_freq = 2442, .hw_value = 7, },
52         { .center_freq = 2447, .hw_value = 8, },
53         { .center_freq = 2452, .hw_value = 9, },
54         { .center_freq = 2457, .hw_value = 10, },
55         { .center_freq = 2462, .hw_value = 11, },
56         { .center_freq = 2467, .hw_value = 12, },
57         { .center_freq = 2472, .hw_value = 13, },
58         { .center_freq = 2484, .hw_value = 14, },
59 };
60
61 static struct ieee80211_supported_band band_2GHz = {
62         .channels = p54_bgchannels,
63         .n_channels = ARRAY_SIZE(p54_bgchannels),
64         .bitrates = p54_bgrates,
65         .n_bitrates = ARRAY_SIZE(p54_bgrates),
66 };
67
68 static struct ieee80211_rate p54_arates[] = {
69         { .bitrate = 60, .hw_value = 4, },
70         { .bitrate = 90, .hw_value = 5, },
71         { .bitrate = 120, .hw_value = 6, },
72         { .bitrate = 180, .hw_value = 7, },
73         { .bitrate = 240, .hw_value = 8, },
74         { .bitrate = 360, .hw_value = 9, },
75         { .bitrate = 480, .hw_value = 10, },
76         { .bitrate = 540, .hw_value = 11, },
77 };
78
79 static struct ieee80211_channel p54_achannels[] = {
80         { .center_freq = 4920 },
81         { .center_freq = 4940 },
82         { .center_freq = 4960 },
83         { .center_freq = 4980 },
84         { .center_freq = 5040 },
85         { .center_freq = 5060 },
86         { .center_freq = 5080 },
87         { .center_freq = 5170 },
88         { .center_freq = 5180 },
89         { .center_freq = 5190 },
90         { .center_freq = 5200 },
91         { .center_freq = 5210 },
92         { .center_freq = 5220 },
93         { .center_freq = 5230 },
94         { .center_freq = 5240 },
95         { .center_freq = 5260 },
96         { .center_freq = 5280 },
97         { .center_freq = 5300 },
98         { .center_freq = 5320 },
99         { .center_freq = 5500 },
100         { .center_freq = 5520 },
101         { .center_freq = 5540 },
102         { .center_freq = 5560 },
103         { .center_freq = 5580 },
104         { .center_freq = 5600 },
105         { .center_freq = 5620 },
106         { .center_freq = 5640 },
107         { .center_freq = 5660 },
108         { .center_freq = 5680 },
109         { .center_freq = 5700 },
110         { .center_freq = 5745 },
111         { .center_freq = 5765 },
112         { .center_freq = 5785 },
113         { .center_freq = 5805 },
114         { .center_freq = 5825 },
115 };
116
117 static struct ieee80211_supported_band band_5GHz = {
118         .channels = p54_achannels,
119         .n_channels = ARRAY_SIZE(p54_achannels),
120         .bitrates = p54_arates,
121         .n_bitrates = ARRAY_SIZE(p54_arates),
122 };
123
124 static int p54_convert_rev0(struct ieee80211_hw *dev,
125                             struct pda_pa_curve_data *curve_data)
126 {
127         struct p54_common *priv = dev->priv;
128         struct p54_pa_curve_data_sample *dst;
129         struct pda_pa_curve_data_sample_rev0 *src;
130         size_t cd_len = sizeof(*curve_data) +
131                 (curve_data->points_per_channel*sizeof(*dst) + 2) *
132                  curve_data->channels;
133         unsigned int i, j;
134         void *source, *target;
135
136         priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len,
137                                    GFP_KERNEL);
138         if (!priv->curve_data)
139                 return -ENOMEM;
140
141         priv->curve_data->entries = curve_data->channels;
142         priv->curve_data->entry_size = sizeof(__le16) +
143                 sizeof(*dst) * curve_data->points_per_channel;
144         priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
145         priv->curve_data->len = cd_len;
146         memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
147         source = curve_data->data;
148         target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
149         for (i = 0; i < curve_data->channels; i++) {
150                 __le16 *freq = source;
151                 source += sizeof(__le16);
152                 *((__le16 *)target) = *freq;
153                 target += sizeof(__le16);
154                 for (j = 0; j < curve_data->points_per_channel; j++) {
155                         dst = target;
156                         src = source;
157
158                         dst->rf_power = src->rf_power;
159                         dst->pa_detector = src->pa_detector;
160                         dst->data_64qam = src->pcv;
161                         /* "invent" the points for the other modulations */
162 #define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y))
163                         dst->data_16qam = SUB(src->pcv, 12);
164                         dst->data_qpsk = SUB(dst->data_16qam, 12);
165                         dst->data_bpsk = SUB(dst->data_qpsk, 12);
166                         dst->data_barker = SUB(dst->data_bpsk, 14);
167 #undef SUB
168                         target += sizeof(*dst);
169                         source += sizeof(*src);
170                 }
171         }
172
173         return 0;
174 }
175
176 static int p54_convert_rev1(struct ieee80211_hw *dev,
177                             struct pda_pa_curve_data *curve_data)
178 {
179         struct p54_common *priv = dev->priv;
180         struct p54_pa_curve_data_sample *dst;
181         struct pda_pa_curve_data_sample_rev1 *src;
182         size_t cd_len = sizeof(*curve_data) +
183                 (curve_data->points_per_channel*sizeof(*dst) + 2) *
184                  curve_data->channels;
185         unsigned int i, j;
186         void *source, *target;
187
188         priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data),
189                                    GFP_KERNEL);
190         if (!priv->curve_data)
191                 return -ENOMEM;
192
193         priv->curve_data->entries = curve_data->channels;
194         priv->curve_data->entry_size = sizeof(__le16) +
195                 sizeof(*dst) * curve_data->points_per_channel;
196         priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
197         priv->curve_data->len = cd_len;
198         memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
199         source = curve_data->data;
200         target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
201         for (i = 0; i < curve_data->channels; i++) {
202                 __le16 *freq = source;
203                 source += sizeof(__le16);
204                 *((__le16 *)target) = *freq;
205                 target += sizeof(__le16);
206                 for (j = 0; j < curve_data->points_per_channel; j++) {
207                         memcpy(target, source, sizeof(*src));
208
209                         target += sizeof(*dst);
210                         source += sizeof(*src);
211                 }
212                 source++;
213         }
214
215         return 0;
216 }
217
218 static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2",
219         "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" };
220
221 static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
222                              u16 type)
223 {
224         struct p54_common *priv = dev->priv;
225         int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
226         int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
227         int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
228         int i;
229
230         if (len != (entry_size * num_entries)) {
231                 printk(KERN_ERR "%s: unknown rssi calibration data packing "
232                                  " type:(%x) len:%d.\n",
233                        wiphy_name(dev->wiphy), type, len);
234
235                 print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
236                                      data, len);
237
238                 printk(KERN_ERR "%s: please report this issue.\n",
239                         wiphy_name(dev->wiphy));
240                 return;
241         }
242
243         for (i = 0; i < num_entries; i++) {
244                 struct pda_rssi_cal_entry *cal = data +
245                                                  (offset + i * entry_size);
246                 priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
247                 priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
248         }
249 }
250
251 static void p54_parse_default_country(struct ieee80211_hw *dev,
252                                       void *data, int len)
253 {
254         struct pda_country *country;
255
256         if (len != sizeof(*country)) {
257                 printk(KERN_ERR "%s: found possible invalid default country "
258                                 "eeprom entry. (entry size: %d)\n",
259                        wiphy_name(dev->wiphy), len);
260
261                 print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
262                                      data, len);
263
264                 printk(KERN_ERR "%s: please report this issue.\n",
265                         wiphy_name(dev->wiphy));
266                 return;
267         }
268
269         country = (struct pda_country *) data;
270         if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO)
271                 regulatory_hint(dev->wiphy, country->alpha2);
272         else {
273                 /* TODO:
274                  * write a shared/common function that converts
275                  * "Regulatory domain codes" (802.11-2007 14.8.2.2)
276                  * into ISO/IEC 3166-1 alpha2 for regulatory_hint.
277                  */
278         }
279 }
280
281 static int p54_convert_output_limits(struct ieee80211_hw *dev,
282                                      u8 *data, size_t len)
283 {
284         struct p54_common *priv = dev->priv;
285
286         if (len < 2)
287                 return -EINVAL;
288
289         if (data[0] != 0) {
290                 printk(KERN_ERR "%s: unknown output power db revision:%x\n",
291                        wiphy_name(dev->wiphy), data[0]);
292                 return -EINVAL;
293         }
294
295         if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len)
296                 return -EINVAL;
297
298         priv->output_limit = kmalloc(data[1] *
299                 sizeof(struct pda_channel_output_limit) +
300                 sizeof(*priv->output_limit), GFP_KERNEL);
301
302         if (!priv->output_limit)
303                 return -ENOMEM;
304
305         priv->output_limit->offset = 0;
306         priv->output_limit->entries = data[1];
307         priv->output_limit->entry_size =
308                 sizeof(struct pda_channel_output_limit);
309         priv->output_limit->len = priv->output_limit->entry_size *
310                                   priv->output_limit->entries +
311                                   priv->output_limit->offset;
312
313         memcpy(priv->output_limit->data, &data[2],
314                data[1] * sizeof(struct pda_channel_output_limit));
315
316         return 0;
317 }
318
319 static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src,
320                                                size_t total_len)
321 {
322         struct p54_cal_database *dst;
323         size_t payload_len, entries, entry_size, offset;
324
325         payload_len = le16_to_cpu(src->len);
326         entries = le16_to_cpu(src->entries);
327         entry_size = le16_to_cpu(src->entry_size);
328         offset = le16_to_cpu(src->offset);
329         if (((entries * entry_size + offset) != payload_len) ||
330              (payload_len + sizeof(*src) != total_len))
331                 return NULL;
332
333         dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL);
334         if (!dst)
335                 return NULL;
336
337         dst->entries = entries;
338         dst->entry_size = entry_size;
339         dst->offset = offset;
340         dst->len = payload_len;
341
342         memcpy(dst->data, src->data, payload_len);
343         return dst;
344 }
345
346 int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
347 {
348         struct p54_common *priv = dev->priv;
349         struct eeprom_pda_wrap *wrap = NULL;
350         struct pda_entry *entry;
351         unsigned int data_len, entry_len;
352         void *tmp;
353         int err;
354         u8 *end = (u8 *)eeprom + len;
355         u16 synth = 0;
356
357         wrap = (struct eeprom_pda_wrap *) eeprom;
358         entry = (void *)wrap->data + le16_to_cpu(wrap->len);
359
360         /* verify that at least the entry length/code fits */
361         while ((u8 *)entry <= end - sizeof(*entry)) {
362                 entry_len = le16_to_cpu(entry->len);
363                 data_len = ((entry_len - 1) << 1);
364
365                 /* abort if entry exceeds whole structure */
366                 if ((u8 *)entry + sizeof(*entry) + data_len > end)
367                         break;
368
369                 switch (le16_to_cpu(entry->code)) {
370                 case PDR_MAC_ADDRESS:
371                         if (data_len != ETH_ALEN)
372                                 break;
373                         SET_IEEE80211_PERM_ADDR(dev, entry->data);
374                         break;
375                 case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
376                         if (priv->output_limit)
377                                 break;
378                         err = p54_convert_output_limits(dev, entry->data,
379                                                         data_len);
380                         if (err)
381                                 goto err;
382                         break;
383                 case PDR_PRISM_PA_CAL_CURVE_DATA: {
384                         struct pda_pa_curve_data *curve_data =
385                                 (struct pda_pa_curve_data *)entry->data;
386                         if (data_len < sizeof(*curve_data)) {
387                                 err = -EINVAL;
388                                 goto err;
389                         }
390
391                         switch (curve_data->cal_method_rev) {
392                         case 0:
393                                 err = p54_convert_rev0(dev, curve_data);
394                                 break;
395                         case 1:
396                                 err = p54_convert_rev1(dev, curve_data);
397                                 break;
398                         default:
399                                 printk(KERN_ERR "%s: unknown curve data "
400                                                 "revision %d\n",
401                                                 wiphy_name(dev->wiphy),
402                                                 curve_data->cal_method_rev);
403                                 err = -ENODEV;
404                                 break;
405                         }
406                         if (err)
407                                 goto err;
408                         }
409                         break;
410                 case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
411                         priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
412                         if (!priv->iq_autocal) {
413                                 err = -ENOMEM;
414                                 goto err;
415                         }
416
417                         memcpy(priv->iq_autocal, entry->data, data_len);
418                         priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
419                         break;
420                 case PDR_DEFAULT_COUNTRY:
421                         p54_parse_default_country(dev, entry->data, data_len);
422                         break;
423                 case PDR_INTERFACE_LIST:
424                         tmp = entry->data;
425                         while ((u8 *)tmp < entry->data + data_len) {
426                                 struct exp_if *exp_if = tmp;
427                                 if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000))
428                                         synth = le16_to_cpu(exp_if->variant);
429                                 tmp += sizeof(*exp_if);
430                         }
431                         break;
432                 case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
433                         if (data_len < 2)
434                                 break;
435                         priv->version = *(u8 *)(entry->data + 1);
436                         break;
437                 case PDR_RSSI_LINEAR_APPROXIMATION:
438                 case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
439                 case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
440                         p54_parse_rssical(dev, entry->data, data_len,
441                                           le16_to_cpu(entry->code));
442                         break;
443                 case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: {
444                         __le16 *src = (void *) entry->data;
445                         s16 *dst = (void *) &priv->rssical_db;
446                         int i;
447
448                         if (data_len != sizeof(priv->rssical_db)) {
449                                 err = -EINVAL;
450                                 goto err;
451                         }
452                         for (i = 0; i < sizeof(priv->rssical_db) /
453                                         sizeof(*src); i++)
454                                 *(dst++) = (s16) le16_to_cpu(*(src++));
455                         }
456                         break;
457                 case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
458                         struct pda_custom_wrapper *pda = (void *) entry->data;
459                         if (priv->output_limit || data_len < sizeof(*pda))
460                                 break;
461                         priv->output_limit = p54_convert_db(pda, data_len);
462                         }
463                         break;
464                 case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: {
465                         struct pda_custom_wrapper *pda = (void *) entry->data;
466                         if (priv->curve_data || data_len < sizeof(*pda))
467                                 break;
468                         priv->curve_data = p54_convert_db(pda, data_len);
469                         }
470                         break;
471                 case PDR_END:
472                         /* make it overrun */
473                         entry_len = len;
474                         break;
475                 default:
476                         break;
477                 }
478
479                 entry = (void *)entry + (entry_len + 1)*2;
480         }
481
482         if (!synth || !priv->iq_autocal || !priv->output_limit ||
483             !priv->curve_data) {
484                 printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
485                         wiphy_name(dev->wiphy));
486                 err = -EINVAL;
487                 goto err;
488         }
489
490         priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
491         if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
492                 p54_init_xbow_synth(priv);
493         if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
494                 dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
495         if (!(synth & PDR_SYNTH_5_GHZ_DISABLED))
496                 dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
497         if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED)
498                 priv->rx_diversity_mask = 3;
499         if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED)
500                 priv->tx_diversity_mask = 3;
501
502         if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
503                 u8 perm_addr[ETH_ALEN];
504
505                 printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
506                         wiphy_name(dev->wiphy));
507                 random_ether_addr(perm_addr);
508                 SET_IEEE80211_PERM_ADDR(dev, perm_addr);
509         }
510
511         printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
512                 wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
513                 p54_rf_chips[priv->rxhw]);
514
515         return 0;
516
517 err:
518         kfree(priv->iq_autocal);
519         kfree(priv->output_limit);
520         kfree(priv->curve_data);
521         priv->iq_autocal = NULL;
522         priv->output_limit = NULL;
523         priv->curve_data = NULL;
524
525         printk(KERN_ERR "%s: eeprom parse failed!\n",
526                 wiphy_name(dev->wiphy));
527         return err;
528 }
529 EXPORT_SYMBOL_GPL(p54_parse_eeprom);
530
531 int p54_read_eeprom(struct ieee80211_hw *dev)
532 {
533         struct p54_common *priv = dev->priv;
534         size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize;
535         int ret = -ENOMEM;
536         void *eeprom = NULL;
537
538         maxblocksize = EEPROM_READBACK_LEN;
539         if (priv->fw_var >= 0x509)
540                 maxblocksize -= 0xc;
541         else
542                 maxblocksize -= 0x4;
543
544         eeprom = kzalloc(eeprom_size, GFP_KERNEL);
545         if (unlikely(!eeprom))
546                 goto free;
547
548         while (eeprom_size) {
549                 blocksize = min(eeprom_size, maxblocksize);
550                 ret = p54_download_eeprom(priv, (void *) (eeprom + offset),
551                                           offset, blocksize);
552                 if (unlikely(ret))
553                         goto free;
554
555                 offset += blocksize;
556                 eeprom_size -= blocksize;
557         }
558
559         ret = p54_parse_eeprom(dev, eeprom, offset);
560 free:
561         kfree(eeprom);
562         return ret;
563 }
564 EXPORT_SYMBOL_GPL(p54_read_eeprom);