SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/iwlwifi/iwl-eeprom.c

   1 /******************************************************************************
   2  *
   3  * This file is provided under a dual BSD/GPLv2 license.  When using or
   4  * redistributing this file, you may do so under either license.
   5  *
   6  * GPL LICENSE SUMMARY
   7  *
   8  * Copyright(c) 2008 Intel Corporation. All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of version 2 of the GNU General Public License as
  12  * published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22  * USA
  23  *
  24  * The full GNU General Public License is included in this distribution
  25  * in the file called LICENSE.GPL.
  26  *
  27  * Contact Information:
  28  * Tomas Winkler <tomas.winkler@intel.com>
  29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30  *
  31  * BSD LICENSE
  32  *
  33  * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
  34  * All rights reserved.
  35  *
  36  * Redistribution and use in source and binary forms, with or without
  37  * modification, are permitted provided that the following conditions
  38  * are met:
  39  *
  40  *  * Redistributions of source code must retain the above copyright
  41  *    notice, this list of conditions and the following disclaimer.
  42  *  * Redistributions in binary form must reproduce the above copyright
  43  *    notice, this list of conditions and the following disclaimer in
  44  *    the documentation and/or other materials provided with the
  45  *    distribution.
  46  *  * Neither the name Intel Corporation nor the names of its
  47  *    contributors may be used to endorse or promote products derived
  48  *    from this software without specific prior written permission.
  49  *
  50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61  *****************************************************************************/
  62
  63
  64 #include <linux/kernel.h>
  65 #include <linux/module.h>
  66 #include <linux/version.h>
  67 #include <linux/init.h>
  68
  69 #include <net/mac80211.h>
  70
  71 #include "iwl-commands.h"
  72 #include "iwl-dev.h"
  73 #include "iwl-core.h"
  74 #include "iwl-debug.h"
  75 #include "iwl-eeprom.h"
  76 #include "iwl-io.h"
  77
  78 /************************** EEPROM BANDS ****************************
  79  *
  80  * The iwl_eeprom_band definitions below provide the mapping from the
  81  * EEPROM contents to the specific channel number supported for each
  82  * band.
  83  *
  84  * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
  85  * definition below maps to physical channel 42 in the 5.2GHz spectrum.
  86  * The specific geography and calibration information for that channel
  87  * is contained in the eeprom map itself.
  88  *
  89  * During init, we copy the eeprom information and channel map
  90  * information into priv->channel_info_24/52 and priv->channel_map_24/52
  91  *
  92  * channel_map_24/52 provides the index in the channel_info array for a
  93  * given channel.  We have to have two separate maps as there is channel
  94  * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
  95  * band_2
  96  *
  97  * A value of 0xff stored in the channel_map indicates that the channel
  98  * is not supported by the hardware at all.
  99  *
 100  * A value of 0xfe in the channel_map indicates that the channel is not
 101  * valid for Tx with the current hardware.  This means that
 102  * while the system can tune and receive on a given channel, it may not
 103  * be able to associate or transmit any frames on that
 104  * channel.  There is no corresponding channel information for that
 105  * entry.
 106  *
 107  *********************************************************************/
 108
 109 /* 2.4 GHz */
 110 const u8 iwl_eeprom_band_1[14] = {
 111         1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
 112 };
 113
 114 /* 5.2 GHz bands */
 115 static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
 116         183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
 117 };
 118
 119 static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
 120         34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
 121 };
 122
 123 static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
 124         100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
 125 };
 126
 127 static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
 128         145, 149, 153, 157, 161, 165
 129 };
 130
 131 static const u8 iwl_eeprom_band_6[] = {       /* 2.4 FAT channel */
 132         1, 2, 3, 4, 5, 6, 7
 133 };
 134
 135 static const u8 iwl_eeprom_band_7[] = {       /* 5.2 FAT channel */
 136         36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
 137 };
 138
 139 /******************************************************************************
 140  *
 141  * EEPROM related functions
 142  *
 143 ******************************************************************************/
 144
 145 int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 146 {
 147         u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 148         if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
 149                 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
 150                 return -ENOENT;
 151         }
 152         return 0;
 153 }
 154 EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
 155
 156 /*
 157  * The device's EEPROM semaphore prevents conflicts between driver and uCode
 158  * when accessing the EEPROM; each access is a series of pulses to/from the
 159  * EEPROM chip, not a single event, so even reads could conflict if they
 160  * weren't arbitrated by the semaphore.
 161  */
 162 int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv)
 163 {
 164         u16 count;
 165         int ret;
 166
 167         for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
 168                 /* Request semaphore */
 169                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 170                             CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 171
 172                 /* See if we got it */
 173                 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
 174                                    CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 175                                    CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 176                                    EEPROM_SEM_TIMEOUT);
 177                 if (ret >= 0) {
 178                         IWL_DEBUG_IO("Acquired semaphore after %d tries.\n",
 179                                 count+1);
 180                         return ret;
 181                 }
 182         }
 183
 184         return ret;
 185 }
 186 EXPORT_SYMBOL(iwlcore_eeprom_acquire_semaphore);
 187
 188 void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv)
 189 {
 190         iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
 191                 CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 192
 193 }
 194 EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore);
 195
 196 const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 197 {
 198         BUG_ON(offset >= priv->cfg->eeprom_size);
 199         return &priv->eeprom[offset];
 200 }
 201 EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
 202
 203 /**
 204  * iwl_eeprom_init - read EEPROM contents
 205  *
 206  * Load the EEPROM contents from adapter into priv->eeprom
 207  *
 208  * NOTE:  This routine uses the non-debug IO access functions.
 209  */
 210 int iwl_eeprom_init(struct iwl_priv *priv)
 211 {
 212         u16 *e;
 213         u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 214         u32 r;
 215         int sz = priv->cfg->eeprom_size;
 216         int ret;
 217         int i;
 218         u16 addr;
 219
 220         /* allocate eeprom */
 221         priv->eeprom = kzalloc(sz, GFP_KERNEL);
 222         if (!priv->eeprom) {
 223                 ret = -ENOMEM;
 224                 goto alloc_err;
 225         }
 226         e = (u16 *)priv->eeprom;
 227
 228         ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 229         if (ret < 0) {
 230                 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
 231                 ret = -ENOENT;
 232                 goto err;
 233         }
 234
 235         /* Make sure driver (instead of uCode) is allowed to read EEPROM */
 236         ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv);
 237         if (ret < 0) {
 238                 IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
 239                 ret = -ENOENT;
 240                 goto err;
 241         }
 242
 243         /* eeprom is an array of 16bit values */
 244         for (addr = 0; addr < sz; addr += sizeof(u16)) {
 245                 _iwl_write32(priv, CSR_EEPROM_REG, addr << 1);
 246                 _iwl_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
 247
 248                 for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
 249                                         i += IWL_EEPROM_ACCESS_DELAY) {
 250                         r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
 251                         if (r & CSR_EEPROM_REG_READ_VALID_MSK)
 252                                 break;
 253                         udelay(IWL_EEPROM_ACCESS_DELAY);
 254                 }
 255
 256                 if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
 257                         IWL_ERROR("Time out reading EEPROM[%d]", addr);
 258                         ret = -ETIMEDOUT;
 259                         goto done;
 260                 }
 261                 e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
 262         }
 263         ret = 0;
 264 done:
 265         priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
 266 err:
 267         if (ret)
 268                 kfree(priv->eeprom);
 269 alloc_err:
 270         return ret;
 271 }
 272 EXPORT_SYMBOL(iwl_eeprom_init);
 273
 274 void iwl_eeprom_free(struct iwl_priv *priv)
 275 {
 276         kfree(priv->eeprom);
 277         priv->eeprom = NULL;
 278 }
 279 EXPORT_SYMBOL(iwl_eeprom_free);
 280
 281 int iwl_eeprom_check_version(struct iwl_priv *priv)
 282 {
 283         return priv->cfg->ops->lib->eeprom_ops.check_version(priv);
 284 }
 285 EXPORT_SYMBOL(iwl_eeprom_check_version);
 286
 287 const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 288 {
 289         return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset);
 290 }
 291 EXPORT_SYMBOL(iwl_eeprom_query_addr);
 292
 293 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
 294 {
 295         return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
 296 }
 297 EXPORT_SYMBOL(iwl_eeprom_query16);
 298
 299 void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac)
 300 {
 301         const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv,
 302                                         EEPROM_MAC_ADDRESS);
 303         memcpy(mac, addr, ETH_ALEN);
 304 }
 305 EXPORT_SYMBOL(iwl_eeprom_get_mac);
 306
 307 static void iwl_init_band_reference(const struct iwl_priv *priv,
 308                         int eep_band, int *eeprom_ch_count,
 309                         const struct iwl_eeprom_channel **eeprom_ch_info,
 310                         const u8 **eeprom_ch_index)
 311 {
 312         u32 offset = priv->cfg->ops->lib->
 313                         eeprom_ops.regulatory_bands[eep_band - 1];
 314         switch (eep_band) {
 315         case 1:         /* 2.4GHz band */
 316                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
 317                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 318                                 iwl_eeprom_query_addr(priv, offset);
 319                 *eeprom_ch_index = iwl_eeprom_band_1;
 320                 break;
 321         case 2:         /* 4.9GHz band */
 322                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
 323                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 324                                 iwl_eeprom_query_addr(priv, offset);
 325                 *eeprom_ch_index = iwl_eeprom_band_2;
 326                 break;
 327         case 3:         /* 5.2GHz band */
 328                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
 329                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 330                                 iwl_eeprom_query_addr(priv, offset);
 331                 *eeprom_ch_index = iwl_eeprom_band_3;
 332                 break;
 333         case 4:         /* 5.5GHz band */
 334                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
 335                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 336                                 iwl_eeprom_query_addr(priv, offset);
 337                 *eeprom_ch_index = iwl_eeprom_band_4;
 338                 break;
 339         case 5:         /* 5.7GHz band */
 340                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
 341                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 342                                 iwl_eeprom_query_addr(priv, offset);
 343                 *eeprom_ch_index = iwl_eeprom_band_5;
 344                 break;
 345         case 6:         /* 2.4GHz FAT channels */
 346                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
 347                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 348                                 iwl_eeprom_query_addr(priv, offset);
 349                 *eeprom_ch_index = iwl_eeprom_band_6;
 350                 break;
 351         case 7:         /* 5 GHz FAT channels */
 352                 *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
 353                 *eeprom_ch_info = (struct iwl_eeprom_channel *)
 354                                 iwl_eeprom_query_addr(priv, offset);
 355                 *eeprom_ch_index = iwl_eeprom_band_7;
 356                 break;
 357         default:
 358                 BUG();
 359                 return;
 360         }
 361 }
 362
 363 #define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
 364                             ? # x " " : "")
 365
 366 /**
 367  * iwl_set_fat_chan_info - Copy fat channel info into driver's priv.
 368  *
 369  * Does not set up a command, or touch hardware.
 370  */
 371 static int iwl_set_fat_chan_info(struct iwl_priv *priv,
 372                               enum ieee80211_band band, u16 channel,
 373                               const struct iwl_eeprom_channel *eeprom_ch,
 374                               u8 fat_extension_channel)
 375 {
 376         struct iwl_channel_info *ch_info;
 377
 378         ch_info = (struct iwl_channel_info *)
 379                         iwl_get_channel_info(priv, band, channel);
 380
 381         if (!is_channel_valid(ch_info))
 382                 return -1;
 383
 384         IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
 385                         " Ad-Hoc %ssupported\n",
 386                         ch_info->channel,
 387                         is_channel_a_band(ch_info) ?
 388                         "5.2" : "2.4",
 389                         CHECK_AND_PRINT(IBSS),
 390                         CHECK_AND_PRINT(ACTIVE),
 391                         CHECK_AND_PRINT(RADAR),
 392                         CHECK_AND_PRINT(WIDE),
 393                         CHECK_AND_PRINT(DFS),
 394                         eeprom_ch->flags,
 395                         eeprom_ch->max_power_avg,
 396                         ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
 397                          && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
 398                         "" : "not ");
 399
 400         ch_info->fat_eeprom = *eeprom_ch;
 401         ch_info->fat_max_power_avg = eeprom_ch->max_power_avg;
 402         ch_info->fat_curr_txpow = eeprom_ch->max_power_avg;
 403         ch_info->fat_min_power = 0;
 404         ch_info->fat_scan_power = eeprom_ch->max_power_avg;
 405         ch_info->fat_flags = eeprom_ch->flags;
 406         ch_info->fat_extension_channel = fat_extension_channel;
 407
 408         return 0;
 409 }
 410
 411 #define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
 412                             ? # x " " : "")
 413
 414 /**
 415  * iwl_init_channel_map - Set up driver's info for all possible channels
 416  */
 417 int iwl_init_channel_map(struct iwl_priv *priv)
 418 {
 419         int eeprom_ch_count = 0;
 420         const u8 *eeprom_ch_index = NULL;
 421         const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
 422         int band, ch;
 423         struct iwl_channel_info *ch_info;
 424
 425         if (priv->channel_count) {
 426                 IWL_DEBUG_INFO("Channel map already initialized.\n");
 427                 return 0;
 428         }
 429
 430         IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
 431
 432         priv->channel_count =
 433             ARRAY_SIZE(iwl_eeprom_band_1) +
 434             ARRAY_SIZE(iwl_eeprom_band_2) +
 435             ARRAY_SIZE(iwl_eeprom_band_3) +
 436             ARRAY_SIZE(iwl_eeprom_band_4) +
 437             ARRAY_SIZE(iwl_eeprom_band_5);
 438
 439         IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
 440
 441         priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
 442                                      priv->channel_count, GFP_KERNEL);
 443         if (!priv->channel_info) {
 444                 IWL_ERROR("Could not allocate channel_info\n");
 445                 priv->channel_count = 0;
 446                 return -ENOMEM;
 447         }
 448
 449         ch_info = priv->channel_info;
 450
 451         /* Loop through the 5 EEPROM bands adding them in order to the
 452          * channel map we maintain (that contains additional information than
 453          * what just in the EEPROM) */
 454         for (band = 1; band <= 5; band++) {
 455
 456                 iwl_init_band_reference(priv, band, &eeprom_ch_count,
 457                                         &eeprom_ch_info, &eeprom_ch_index);
 458
 459                 /* Loop through each band adding each of the channels */
 460                 for (ch = 0; ch < eeprom_ch_count; ch++) {
 461                         ch_info->channel = eeprom_ch_index[ch];
 462                         ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
 463                             IEEE80211_BAND_5GHZ;
 464
 465                         /* permanently store EEPROM's channel regulatory flags
 466                          *   and max power in channel info database. */
 467                         ch_info->eeprom = eeprom_ch_info[ch];
 468
 469                         /* Copy the run-time flags so they are there even on
 470                          * invalid channels */
 471                         ch_info->flags = eeprom_ch_info[ch].flags;
 472                         /* First write that fat is not enabled, and then enable
 473                          * one by one */
 474                         ch_info->fat_extension_channel =
 475                                 (IEEE80211_CHAN_NO_FAT_ABOVE |
 476                                  IEEE80211_CHAN_NO_FAT_BELOW);
 477
 478                         if (!(is_channel_valid(ch_info))) {
 479                                 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
 480                                                "No traffic\n",
 481                                                ch_info->channel,
 482                                                ch_info->flags,
 483                                                is_channel_a_band(ch_info) ?
 484                                                "5.2" : "2.4");
 485                                 ch_info++;
 486                                 continue;
 487                         }
 488
 489                         /* Initialize regulatory-based run-time data */
 490                         ch_info->max_power_avg = ch_info->curr_txpow =
 491                             eeprom_ch_info[ch].max_power_avg;
 492                         ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
 493                         ch_info->min_power = 0;
 494
 495                         IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
 496                                        " Ad-Hoc %ssupported\n",
 497                                        ch_info->channel,
 498                                        is_channel_a_band(ch_info) ?
 499                                        "5.2" : "2.4",
 500                                        CHECK_AND_PRINT_I(VALID),
 501                                        CHECK_AND_PRINT_I(IBSS),
 502                                        CHECK_AND_PRINT_I(ACTIVE),
 503                                        CHECK_AND_PRINT_I(RADAR),
 504                                        CHECK_AND_PRINT_I(WIDE),
 505                                        CHECK_AND_PRINT_I(DFS),
 506                                        eeprom_ch_info[ch].flags,
 507                                        eeprom_ch_info[ch].max_power_avg,
 508                                        ((eeprom_ch_info[ch].
 509                                          flags & EEPROM_CHANNEL_IBSS)
 510                                         && !(eeprom_ch_info[ch].
 511                                              flags & EEPROM_CHANNEL_RADAR))
 512                                        ? "" : "not ");
 513
 514                         /* Set the user_txpower_limit to the highest power
 515                          * supported by any channel */
 516                         if (eeprom_ch_info[ch].max_power_avg >
 517                                                 priv->tx_power_user_lmt)
 518                                 priv->tx_power_user_lmt =
 519                                     eeprom_ch_info[ch].max_power_avg;
 520
 521                         ch_info++;
 522                 }
 523         }
 524
 525         /* Two additional EEPROM bands for 2.4 and 5 GHz FAT channels */
 526         for (band = 6; band <= 7; band++) {
 527                 enum ieee80211_band ieeeband;
 528                 u8 fat_extension_chan;
 529
 530                 iwl_init_band_reference(priv, band, &eeprom_ch_count,
 531                                         &eeprom_ch_info, &eeprom_ch_index);
 532
 533                 /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
 534                 ieeeband =
 535                         (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 536
 537                 /* Loop through each band adding each of the channels */
 538                 for (ch = 0; ch < eeprom_ch_count; ch++) {
 539
 540                         if ((band == 6) &&
 541                                 ((eeprom_ch_index[ch] == 5) ||
 542                                  (eeprom_ch_index[ch] == 6) ||
 543                                  (eeprom_ch_index[ch] == 7)))
 544                                 /* both are allowed: above and below */
 545                                 fat_extension_chan = 0;
 546                         else
 547                                 fat_extension_chan =
 548                                         IEEE80211_CHAN_NO_FAT_BELOW;
 549
 550                         /* Set up driver's info for lower half */
 551                         iwl_set_fat_chan_info(priv, ieeeband,
 552                                                 eeprom_ch_index[ch],
 553                                                 &(eeprom_ch_info[ch]),
 554                                                 fat_extension_chan);
 555
 556                         /* Set up driver's info for upper half */
 557                         iwl_set_fat_chan_info(priv, ieeeband,
 558                                                 (eeprom_ch_index[ch] + 4),
 559                                                 &(eeprom_ch_info[ch]),
 560                                                 IEEE80211_CHAN_NO_FAT_ABOVE);
 561                 }
 562         }
 563
 564         return 0;
 565 }
 566 EXPORT_SYMBOL(iwl_init_channel_map);
 567
 568 /*
 569  * iwl_free_channel_map - undo allocations in iwl_init_channel_map
 570  */
 571 void iwl_free_channel_map(struct iwl_priv *priv)
 572 {
 573         kfree(priv->channel_info);
 574         priv->channel_count = 0;
 575 }
 576
 577 /**
 578  * iwl_get_channel_info - Find driver's private channel info
 579  *
 580  * Based on band and channel number.
 581  */
 582 const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
 583                                         enum ieee80211_band band, u16 channel)
 584 {
 585         int i;
 586
 587         switch (band) {
 588         case IEEE80211_BAND_5GHZ:
 589                 for (i = 14; i < priv->channel_count; i++) {
 590                         if (priv->channel_info[i].channel == channel)
 591                                 return &priv->channel_info[i];
 592                 }
 593                 break;
 594         case IEEE80211_BAND_2GHZ:
 595                 if (channel >= 1 && channel <= 14)
 596                         return &priv->channel_info[channel - 1];
 597                 break;
 598         default:
 599                 BUG();
 600         }
 601
 602         return NULL;
 603 }
 604 EXPORT_SYMBOL(iwl_get_channel_info);
 605