SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/iwlwifi/iwl-agn.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
   4  *
   5  * Portions of this file are derived from the ipw3945 project, as well
   6  * as portions of the ieee80211 subsystem header files.
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of version 2 of the GNU General Public License as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but WITHOUT
  13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  15  * more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along with
  18  * this program; if not, write to the Free Software Foundation, Inc.,
  19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  20  *
  21  * The full GNU General Public License is included in this distribution in the
  22  * file called LICENSE.
  23  *
  24  * Contact Information:
  25  *  Intel Linux Wireless <ilw@linux.intel.com>
  26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27  *
  28  *****************************************************************************/
  29
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/init.h>
  33 #include <linux/pci.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/delay.h>
  36 #include <linux/sched.h>
  37 #include <linux/skbuff.h>
  38 #include <linux/netdevice.h>
  39 #include <linux/wireless.h>
  40 #include <linux/firmware.h>
  41 #include <linux/etherdevice.h>
  42 #include <linux/if_arp.h>
  43
  44 #include <net/mac80211.h>
  45
  46 #include <asm/div64.h>
  47
  48 #define DRV_NAME        "iwlagn"
  49
  50 #include "iwl-eeprom.h"
  51 #include "iwl-dev.h"
  52 #include "iwl-core.h"
  53 #include "iwl-io.h"
  54 #include "iwl-helpers.h"
  55 #include "iwl-sta.h"
  56 #include "iwl-calib.h"
  57 #include "iwl-agn.h"
  58
  59
  60 /******************************************************************************
  61  *
  62  * module boiler plate
  63  *
  64  ******************************************************************************/
  65
  66 /*
  67  * module name, copyright, version, etc.
  68  */
  69 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
  70
  71 #ifdef CONFIG_IWLWIFI_DEBUG
  72 #define VD "d"
  73 #else
  74 #define VD
  75 #endif
  76
  77 #define DRV_VERSION     IWLWIFI_VERSION VD
  78
  79
  80 MODULE_DESCRIPTION(DRV_DESCRIPTION);
  81 MODULE_VERSION(DRV_VERSION);
  82 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  83 MODULE_LICENSE("GPL");
  84 MODULE_ALIAS("iwl4965");
  85
  86 /*************** STATION TABLE MANAGEMENT ****
  87  * mac80211 should be examined to determine if sta_info is duplicating
  88  * the functionality provided here
  89  */
  90
  91 /**************************************************************/
  92
  93 /**
  94  * iwl_commit_rxon - commit staging_rxon to hardware
  95  *
  96  * The RXON command in staging_rxon is committed to the hardware and
  97  * the active_rxon structure is updated with the new data.  This
  98  * function correctly transitions out of the RXON_ASSOC_MSK state if
  99  * a HW tune is required based on the RXON structure changes.
 100  */
 101 int iwl_commit_rxon(struct iwl_priv *priv)
 102 {
 103         /* cast away the const for active_rxon in this function */
 104         struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
 105         int ret;
 106         bool new_assoc =
 107                 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
 108
 109         if (!iwl_is_alive(priv))
 110                 return -EBUSY;
 111
 112         /* always get timestamp with Rx frame */
 113         priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
 114
 115         ret = iwl_check_rxon_cmd(priv);
 116         if (ret) {
 117                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
 118                 return -EINVAL;
 119         }
 120
 121         /*
 122          * receive commit_rxon request
 123          * abort any previous channel switch if still in process
 124          */
 125         if (priv->switch_rxon.switch_in_progress &&
 126             (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
 127                 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
 128                       le16_to_cpu(priv->switch_rxon.channel));
 129                 priv->switch_rxon.switch_in_progress = false;
 130         }
 131
 132         /* If we don't need to send a full RXON, we can use
 133          * iwl_rxon_assoc_cmd which is used to reconfigure filter
 134          * and other flags for the current radio configuration. */
 135         if (!iwl_full_rxon_required(priv)) {
 136                 ret = iwl_send_rxon_assoc(priv);
 137                 if (ret) {
 138                         IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
 139                         return ret;
 140                 }
 141
 142                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 143                 iwl_print_rx_config_cmd(priv);
 144                 return 0;
 145         }
 146
 147         /* If we are currently associated and the new config requires
 148          * an RXON_ASSOC and the new config wants the associated mask enabled,
 149          * we must clear the associated from the active configuration
 150          * before we apply the new config */
 151         if (iwl_is_associated(priv) && new_assoc) {
 152                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
 153                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 154
 155                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 156                                       sizeof(struct iwl_rxon_cmd),
 157                                       &priv->active_rxon);
 158
 159                 /* If the mask clearing failed then we set
 160                  * active_rxon back to what it was previously */
 161                 if (ret) {
 162                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
 163                         IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
 164                         return ret;
 165                 }
 166                 iwl_clear_ucode_stations(priv, false);
 167                 iwl_restore_stations(priv);
 168         }
 169
 170         IWL_DEBUG_INFO(priv, "Sending RXON\n"
 171                        "* with%s RXON_FILTER_ASSOC_MSK\n"
 172                        "* channel = %d\n"
 173                        "* bssid = %pM\n",
 174                        (new_assoc ? "" : "out"),
 175                        le16_to_cpu(priv->staging_rxon.channel),
 176                        priv->staging_rxon.bssid_addr);
 177
 178         iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
 179
 180         /* Apply the new configuration
 181          * RXON unassoc clears the station table in uCode so restoration of
 182          * stations is needed after it (the RXON command) completes
 183          */
 184         if (!new_assoc) {
 185                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 186                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
 187                 if (ret) {
 188                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
 189                         return ret;
 190                 }
 191                 IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON. \n");
 192                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 193                 iwl_clear_ucode_stations(priv, false);
 194                 iwl_restore_stations(priv);
 195         }
 196
 197         priv->start_calib = 0;
 198         if (new_assoc) {
 199                 /*
 200                  * allow CTS-to-self if possible for new association.
 201                  * this is relevant only for 5000 series and up,
 202                  * but will not damage 4965
 203                  */
 204                 priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
 205
 206                 /* Apply the new configuration
 207                  * RXON assoc doesn't clear the station table in uCode,
 208                  */
 209                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
 210                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
 211                 if (ret) {
 212                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
 213                         return ret;
 214                 }
 215                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 216         }
 217         iwl_print_rx_config_cmd(priv);
 218
 219         iwl_init_sensitivity(priv);
 220
 221         /* If we issue a new RXON command which required a tune then we must
 222          * send a new TXPOWER command or we won't be able to Tx any frames */
 223         ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
 224         if (ret) {
 225                 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
 226                 return ret;
 227         }
 228
 229         return 0;
 230 }
 231
 232 void iwl_update_chain_flags(struct iwl_priv *priv)
 233 {
 234
 235         if (priv->cfg->ops->hcmd->set_rxon_chain)
 236                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
 237         iwlcore_commit_rxon(priv);
 238 }
 239
 240 static void iwl_clear_free_frames(struct iwl_priv *priv)
 241 {
 242         struct list_head *element;
 243
 244         IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
 245                        priv->frames_count);
 246
 247         while (!list_empty(&priv->free_frames)) {
 248                 element = priv->free_frames.next;
 249                 list_del(element);
 250                 kfree(list_entry(element, struct iwl_frame, list));
 251                 priv->frames_count--;
 252         }
 253
 254         if (priv->frames_count) {
 255                 IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
 256                             priv->frames_count);
 257                 priv->frames_count = 0;
 258         }
 259 }
 260
 261 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
 262 {
 263         struct iwl_frame *frame;
 264         struct list_head *element;
 265         if (list_empty(&priv->free_frames)) {
 266                 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
 267                 if (!frame) {
 268                         IWL_ERR(priv, "Could not allocate frame!\n");
 269                         return NULL;
 270                 }
 271
 272                 priv->frames_count++;
 273                 return frame;
 274         }
 275
 276         element = priv->free_frames.next;
 277         list_del(element);
 278         return list_entry(element, struct iwl_frame, list);
 279 }
 280
 281 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
 282 {
 283         memset(frame, 0, sizeof(*frame));
 284         list_add(&frame->list, &priv->free_frames);
 285 }
 286
 287 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
 288                                           struct ieee80211_hdr *hdr,
 289                                           int left)
 290 {
 291         if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
 292             ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
 293              (priv->iw_mode != NL80211_IFTYPE_AP)))
 294                 return 0;
 295
 296         if (priv->ibss_beacon->len > left)
 297                 return 0;
 298
 299         memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
 300
 301         return priv->ibss_beacon->len;
 302 }
 303
 304 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
 305 static void iwl_set_beacon_tim(struct iwl_priv *priv,
 306                 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
 307                 u8 *beacon, u32 frame_size)
 308 {
 309         u16 tim_idx;
 310         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
 311
 312         /*
 313          * The index is relative to frame start but we start looking at the
 314          * variable-length part of the beacon.
 315          */
 316         tim_idx = mgmt->u.beacon.variable - beacon;
 317
 318         /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
 319         while ((tim_idx < (frame_size - 2)) &&
 320                         (beacon[tim_idx] != WLAN_EID_TIM))
 321                 tim_idx += beacon[tim_idx+1] + 2;
 322
 323         /* If TIM field was found, set variables */
 324         if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
 325                 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
 326                 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
 327         } else
 328                 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
 329 }
 330
 331 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 332                                        struct iwl_frame *frame)
 333 {
 334         struct iwl_tx_beacon_cmd *tx_beacon_cmd;
 335         u32 frame_size;
 336         u32 rate_flags;
 337         u32 rate;
 338         /*
 339          * We have to set up the TX command, the TX Beacon command, and the
 340          * beacon contents.
 341          */
 342
 343         /* Initialize memory */
 344         tx_beacon_cmd = &frame->u.beacon;
 345         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
 346
 347         /* Set up TX beacon contents */
 348         frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
 349                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
 350         if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
 351                 return 0;
 352
 353         /* Set up TX command fields */
 354         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
 355         tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
 356         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 357         tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
 358                 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
 359
 360         /* Set up TX beacon command fields */
 361         iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
 362                         frame_size);
 363
 364         /* Set up packet rate and flags */
 365         rate = iwl_rate_get_lowest_plcp(priv);
 366         priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
 367         rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
 368         if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
 369                 rate_flags |= RATE_MCS_CCK_MSK;
 370         tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
 371                         rate_flags);
 372
 373         return sizeof(*tx_beacon_cmd) + frame_size;
 374 }
 375 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
 376 {
 377         struct iwl_frame *frame;
 378         unsigned int frame_size;
 379         int rc;
 380
 381         frame = iwl_get_free_frame(priv);
 382         if (!frame) {
 383                 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
 384                           "command.\n");
 385                 return -ENOMEM;
 386         }
 387
 388         frame_size = iwl_hw_get_beacon_cmd(priv, frame);
 389         if (!frame_size) {
 390                 IWL_ERR(priv, "Error configuring the beacon command\n");
 391                 iwl_free_frame(priv, frame);
 392                 return -EINVAL;
 393         }
 394
 395         rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
 396                               &frame->u.cmd[0]);
 397
 398         iwl_free_frame(priv, frame);
 399
 400         return rc;
 401 }
 402
 403 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
 404 {
 405         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 406
 407         dma_addr_t addr = get_unaligned_le32(&tb->lo);
 408         if (sizeof(dma_addr_t) > sizeof(u32))
 409                 addr |=
 410                 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
 411
 412         return addr;
 413 }
 414
 415 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
 416 {
 417         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 418
 419         return le16_to_cpu(tb->hi_n_len) >> 4;
 420 }
 421
 422 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
 423                                   dma_addr_t addr, u16 len)
 424 {
 425         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
 426         u16 hi_n_len = len << 4;
 427
 428         put_unaligned_le32(addr, &tb->lo);
 429         if (sizeof(dma_addr_t) > sizeof(u32))
 430                 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
 431
 432         tb->hi_n_len = cpu_to_le16(hi_n_len);
 433
 434         tfd->num_tbs = idx + 1;
 435 }
 436
 437 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
 438 {
 439         return tfd->num_tbs & 0x1f;
 440 }
 441
 442 /**
 443  * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
 444  * @priv - driver private data
 445  * @txq - tx queue
 446  *
 447  * Does NOT advance any TFD circular buffer read/write indexes
 448  * Does NOT free the TFD itself (which is within circular buffer)
 449  */
 450 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 451 {
 452         struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
 453         struct iwl_tfd *tfd;
 454         struct pci_dev *dev = priv->pci_dev;
 455         int index = txq->q.read_ptr;
 456         int i;
 457         int num_tbs;
 458
 459         tfd = &tfd_tmp[index];
 460
 461         /* Sanity check on number of chunks */
 462         num_tbs = iwl_tfd_get_num_tbs(tfd);
 463
 464         if (num_tbs >= IWL_NUM_OF_TBS) {
 465                 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
 466                 /* @todo issue fatal error, it is quite serious situation */
 467                 return;
 468         }
 469
 470         /* Unmap tx_cmd */
 471         if (num_tbs)
 472                 pci_unmap_single(dev,
 473                                 pci_unmap_addr(&txq->meta[index], mapping),
 474                                 pci_unmap_len(&txq->meta[index], len),
 475                                 PCI_DMA_BIDIRECTIONAL);
 476
 477         /* Unmap chunks, if any. */
 478         for (i = 1; i < num_tbs; i++) {
 479                 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
 480                                 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
 481
 482                 if (txq->txb) {
 483                         dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]);
 484                         txq->txb[txq->q.read_ptr].skb[i - 1] = NULL;
 485                 }
 486         }
 487 }
 488
 489 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
 490                                  struct iwl_tx_queue *txq,
 491                                  dma_addr_t addr, u16 len,
 492                                  u8 reset, u8 pad)
 493 {
 494         struct iwl_queue *q;
 495         struct iwl_tfd *tfd, *tfd_tmp;
 496         u32 num_tbs;
 497
 498         q = &txq->q;
 499         tfd_tmp = (struct iwl_tfd *)txq->tfds;
 500         tfd = &tfd_tmp[q->write_ptr];
 501
 502         if (reset)
 503                 memset(tfd, 0, sizeof(*tfd));
 504
 505         num_tbs = iwl_tfd_get_num_tbs(tfd);
 506
 507         /* Each TFD can point to a maximum 20 Tx buffers */
 508         if (num_tbs >= IWL_NUM_OF_TBS) {
 509                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
 510                           IWL_NUM_OF_TBS);
 511                 return -EINVAL;
 512         }
 513
 514         BUG_ON(addr & ~DMA_BIT_MASK(36));
 515         if (unlikely(addr & ~IWL_TX_DMA_MASK))
 516                 IWL_ERR(priv, "Unaligned address = %llx\n",
 517                           (unsigned long long)addr);
 518
 519         iwl_tfd_set_tb(tfd, num_tbs, addr, len);
 520
 521         return 0;
 522 }
 523
 524 /*
 525  * Tell nic where to find circular buffer of Tx Frame Descriptors for
 526  * given Tx queue, and enable the DMA channel used for that queue.
 527  *
 528  * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
 529  * channels supported in hardware.
 530  */
 531 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 532                          struct iwl_tx_queue *txq)
 533 {
 534         int txq_id = txq->q.id;
 535
 536         /* Circular buffer (TFD queue in DRAM) physical base address */
 537         iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
 538                              txq->q.dma_addr >> 8);
 539
 540         return 0;
 541 }
 542
 543 /******************************************************************************
 544  *
 545  * Generic RX handler implementations
 546  *
 547  ******************************************************************************/
 548 static void iwl_rx_reply_alive(struct iwl_priv *priv,
 549                                 struct iwl_rx_mem_buffer *rxb)
 550 {
 551         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 552         struct iwl_alive_resp *palive;
 553         struct delayed_work *pwork;
 554
 555         palive = &pkt->u.alive_frame;
 556
 557         IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
 558                        "0x%01X 0x%01X\n",
 559                        palive->is_valid, palive->ver_type,
 560                        palive->ver_subtype);
 561
 562         if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
 563                 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
 564                 memcpy(&priv->card_alive_init,
 565                        &pkt->u.alive_frame,
 566                        sizeof(struct iwl_init_alive_resp));
 567                 pwork = &priv->init_alive_start;
 568         } else {
 569                 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 570                 memcpy(&priv->card_alive, &pkt->u.alive_frame,
 571                        sizeof(struct iwl_alive_resp));
 572                 pwork = &priv->alive_start;
 573         }
 574
 575         /* We delay the ALIVE response by 5ms to
 576          * give the HW RF Kill time to activate... */
 577         if (palive->is_valid == UCODE_VALID_OK)
 578                 queue_delayed_work(priv->workqueue, pwork,
 579                                    msecs_to_jiffies(5));
 580         else
 581                 IWL_WARN(priv, "uCode did not respond OK.\n");
 582 }
 583
 584 static void iwl_bg_beacon_update(struct work_struct *work)
 585 {
 586         struct iwl_priv *priv =
 587                 container_of(work, struct iwl_priv, beacon_update);
 588         struct sk_buff *beacon;
 589
 590         /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
 591         beacon = ieee80211_beacon_get(priv->hw, priv->vif);
 592
 593         if (!beacon) {
 594                 IWL_ERR(priv, "update beacon failed\n");
 595                 return;
 596         }
 597
 598         mutex_lock(&priv->mutex);
 599         /* new beacon skb is allocated every time; dispose previous.*/
 600         if (priv->ibss_beacon)
 601                 dev_kfree_skb(priv->ibss_beacon);
 602
 603         priv->ibss_beacon = beacon;
 604         mutex_unlock(&priv->mutex);
 605
 606         iwl_send_beacon_cmd(priv);
 607 }
 608
 609 /**
 610  * iwl_bg_statistics_periodic - Timer callback to queue statistics
 611  *
 612  * This callback is provided in order to send a statistics request.
 613  *
 614  * This timer function is continually reset to execute within
 615  * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
 616  * was received.  We need to ensure we receive the statistics in order
 617  * to update the temperature used for calibrating the TXPOWER.
 618  */
 619 static void iwl_bg_statistics_periodic(unsigned long data)
 620 {
 621         struct iwl_priv *priv = (struct iwl_priv *)data;
 622
 623         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 624                 return;
 625
 626         /* dont send host command if rf-kill is on */
 627         if (!iwl_is_ready_rf(priv))
 628                 return;
 629
 630         iwl_send_statistics_request(priv, CMD_ASYNC, false);
 631 }
 632
 633
 634 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
 635                                         u32 start_idx, u32 num_events,
 636                                         u32 mode)
 637 {
 638         u32 i;
 639         u32 ptr;        /* SRAM byte address of log data */
 640         u32 ev, time, data; /* event log data */
 641         unsigned long reg_flags;
 642
 643         if (mode == 0)
 644                 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
 645         else
 646                 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
 647
 648         /* Make sure device is powered up for SRAM reads */
 649         spin_lock_irqsave(&priv->reg_lock, reg_flags);
 650         if (iwl_grab_nic_access(priv)) {
 651                 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 652                 return;
 653         }
 654
 655         /* Set starting address; reads will auto-increment */
 656         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
 657         rmb();
 658
 659         /*
 660          * "time" is actually "data" for mode 0 (no timestamp).
 661          * place event id # at far right for easier visual parsing.
 662          */
 663         for (i = 0; i < num_events; i++) {
 664                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 665                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 666                 if (mode == 0) {
 667                         trace_iwlwifi_dev_ucode_cont_event(priv,
 668                                                         0, time, ev);
 669                 } else {
 670                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 671                         trace_iwlwifi_dev_ucode_cont_event(priv,
 672                                                 time, data, ev);
 673                 }
 674         }
 675         /* Allow device to power down */
 676         iwl_release_nic_access(priv);
 677         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 678 }
 679
 680 static void iwl_continuous_event_trace(struct iwl_priv *priv)
 681 {
 682         u32 capacity;   /* event log capacity in # entries */
 683         u32 base;       /* SRAM byte address of event log header */
 684         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
 685         u32 num_wraps;  /* # times uCode wrapped to top of log */
 686         u32 next_entry; /* index of next entry to be written by uCode */
 687
 688         if (priv->ucode_type == UCODE_INIT)
 689                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
 690         else
 691                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 692         if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
 693                 capacity = iwl_read_targ_mem(priv, base);
 694                 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
 695                 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
 696                 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
 697         } else
 698                 return;
 699
 700         if (num_wraps == priv->event_log.num_wraps) {
 701                 iwl_print_cont_event_trace(priv,
 702                                        base, priv->event_log.next_entry,
 703                                        next_entry - priv->event_log.next_entry,
 704                                        mode);
 705                 priv->event_log.non_wraps_count++;
 706         } else {
 707                 if ((num_wraps - priv->event_log.num_wraps) > 1)
 708                         priv->event_log.wraps_more_count++;
 709                 else
 710                         priv->event_log.wraps_once_count++;
 711                 trace_iwlwifi_dev_ucode_wrap_event(priv,
 712                                 num_wraps - priv->event_log.num_wraps,
 713                                 next_entry, priv->event_log.next_entry);
 714                 if (next_entry < priv->event_log.next_entry) {
 715                         iwl_print_cont_event_trace(priv, base,
 716                                priv->event_log.next_entry,
 717                                capacity - priv->event_log.next_entry,
 718                                mode);
 719
 720                         iwl_print_cont_event_trace(priv, base, 0,
 721                                 next_entry, mode);
 722                 } else {
 723                         iwl_print_cont_event_trace(priv, base,
 724                                next_entry, capacity - next_entry,
 725                                mode);
 726
 727                         iwl_print_cont_event_trace(priv, base, 0,
 728                                 next_entry, mode);
 729                 }
 730         }
 731         priv->event_log.num_wraps = num_wraps;
 732         priv->event_log.next_entry = next_entry;
 733 }
 734
 735 /**
 736  * iwl_bg_ucode_trace - Timer callback to log ucode event
 737  *
 738  * The timer is continually set to execute every
 739  * UCODE_TRACE_PERIOD milliseconds after the last timer expired
 740  * this function is to perform continuous uCode event logging operation
 741  * if enabled
 742  */
 743 static void iwl_bg_ucode_trace(unsigned long data)
 744 {
 745         struct iwl_priv *priv = (struct iwl_priv *)data;
 746
 747         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 748                 return;
 749
 750         if (priv->event_log.ucode_trace) {
 751                 iwl_continuous_event_trace(priv);
 752                 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
 753                 mod_timer(&priv->ucode_trace,
 754                          jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
 755         }
 756 }
 757
 758 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
 759                                 struct iwl_rx_mem_buffer *rxb)
 760 {
 761 #ifdef CONFIG_IWLWIFI_DEBUG
 762         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 763         struct iwl4965_beacon_notif *beacon =
 764                 (struct iwl4965_beacon_notif *)pkt->u.raw;
 765         u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
 766
 767         IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
 768                 "tsf %d %d rate %d\n",
 769                 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
 770                 beacon->beacon_notify_hdr.failure_frame,
 771                 le32_to_cpu(beacon->ibss_mgr_status),
 772                 le32_to_cpu(beacon->high_tsf),
 773                 le32_to_cpu(beacon->low_tsf), rate);
 774 #endif
 775
 776         if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
 777             (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
 778                 queue_work(priv->workqueue, &priv->beacon_update);
 779 }
 780
 781 /* Handle notification from uCode that card's power state is changing
 782  * due to software, hardware, or critical temperature RFKILL */
 783 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 784                                     struct iwl_rx_mem_buffer *rxb)
 785 {
 786         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 787         u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 788         unsigned long status = priv->status;
 789
 790         IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
 791                           (flags & HW_CARD_DISABLED) ? "Kill" : "On",
 792                           (flags & SW_CARD_DISABLED) ? "Kill" : "On",
 793                           (flags & CT_CARD_DISABLED) ?
 794                           "Reached" : "Not reached");
 795
 796         if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
 797                      CT_CARD_DISABLED)) {
 798
 799                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 800                             CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 801
 802                 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 803                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 804
 805                 if (!(flags & RXON_CARD_DISABLED)) {
 806                         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
 807                                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 808                         iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 809                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 810                 }
 811                 if (flags & CT_CARD_DISABLED)
 812                         iwl_tt_enter_ct_kill(priv);
 813         }
 814         if (!(flags & CT_CARD_DISABLED))
 815                 iwl_tt_exit_ct_kill(priv);
 816
 817         if (flags & HW_CARD_DISABLED)
 818                 set_bit(STATUS_RF_KILL_HW, &priv->status);
 819         else
 820                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
 821
 822
 823         if (!(flags & RXON_CARD_DISABLED))
 824                 iwl_scan_cancel(priv);
 825
 826         if ((test_bit(STATUS_RF_KILL_HW, &status) !=
 827              test_bit(STATUS_RF_KILL_HW, &priv->status)))
 828                 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
 829                         test_bit(STATUS_RF_KILL_HW, &priv->status));
 830         else
 831                 wake_up_interruptible(&priv->wait_command_queue);
 832 }
 833
 834 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 835 {
 836         if (src == IWL_PWR_SRC_VAUX) {
 837                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
 838                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 839                                                APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 840                                                ~APMG_PS_CTRL_MSK_PWR_SRC);
 841         } else {
 842                 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 843                                        APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 844                                        ~APMG_PS_CTRL_MSK_PWR_SRC);
 845         }
 846
 847         return 0;
 848 }
 849
 850 /**
 851  * iwl_setup_rx_handlers - Initialize Rx handler callbacks
 852  *
 853  * Setup the RX handlers for each of the reply types sent from the uCode
 854  * to the host.
 855  *
 856  * This function chains into the hardware specific files for them to setup
 857  * any hardware specific handlers as well.
 858  */
 859 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 860 {
 861         priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
 862         priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
 863         priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
 864         priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
 865                         iwl_rx_spectrum_measure_notif;
 866         priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
 867         priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
 868             iwl_rx_pm_debug_statistics_notif;
 869         priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
 870
 871         /*
 872          * The same handler is used for both the REPLY to a discrete
 873          * statistics request from the host as well as for the periodic
 874          * statistics notifications (after received beacons) from the uCode.
 875          */
 876         priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
 877         priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
 878
 879         iwl_setup_rx_scan_handlers(priv);
 880
 881         /* status change handler */
 882         priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
 883
 884         priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
 885             iwl_rx_missed_beacon_notif;
 886         /* Rx handlers */
 887         priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
 888         priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
 889         /* block ack */
 890         priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
 891         /* Set up hardware specific Rx handlers */
 892         priv->cfg->ops->lib->rx_handler_setup(priv);
 893 }
 894
 895 /**
 896  * iwl_rx_handle - Main entry function for receiving responses from uCode
 897  *
 898  * Uses the priv->rx_handlers callback function array to invoke
 899  * the appropriate handlers, including command responses,
 900  * frame-received notifications, and other notifications.
 901  */
 902 void iwl_rx_handle(struct iwl_priv *priv)
 903 {
 904         struct iwl_rx_mem_buffer *rxb;
 905         struct iwl_rx_packet *pkt;
 906         struct iwl_rx_queue *rxq = &priv->rxq;
 907         u32 r, i;
 908         int reclaim;
 909         unsigned long flags;
 910         u8 fill_rx = 0;
 911         u32 count = 8;
 912         int total_empty;
 913
 914         /* uCode's read index (stored in shared DRAM) indicates the last Rx
 915          * buffer that the driver may process (last buffer filled by ucode). */
 916         r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 917         i = rxq->read;
 918
 919         /* Rx interrupt, but nothing sent from uCode */
 920         if (i == r)
 921                 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 922
 923         /* calculate total frames need to be restock after handling RX */
 924         total_empty = r - rxq->write_actual;
 925         if (total_empty < 0)
 926                 total_empty += RX_QUEUE_SIZE;
 927
 928         if (total_empty > (RX_QUEUE_SIZE / 2))
 929                 fill_rx = 1;
 930
 931         while (i != r) {
 932                 rxb = rxq->queue[i];
 933
 934                 /* If an RXB doesn't have a Rx queue slot associated with it,
 935                  * then a bug has been introduced in the queue refilling
 936                  * routines -- catch it here */
 937                 BUG_ON(rxb == NULL);
 938
 939                 rxq->queue[i] = NULL;
 940
 941                 pci_unmap_page(priv->pci_dev, rxb->page_dma,
 942                                PAGE_SIZE << priv->hw_params.rx_page_order,
 943                                PCI_DMA_FROMDEVICE);
 944                 pkt = rxb_addr(rxb);
 945
 946                 trace_iwlwifi_dev_rx(priv, pkt,
 947                         le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 948
 949                 /* Reclaim a command buffer only if this packet is a response
 950                  *   to a (driver-originated) command.
 951                  * If the packet (e.g. Rx frame) originated from uCode,
 952                  *   there is no command buffer to reclaim.
 953                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
 954                  *   but apparently a few don't get set; catch them here. */
 955                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
 956                         (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
 957                         (pkt->hdr.cmd != REPLY_RX) &&
 958                         (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
 959                         (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
 960                         (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
 961                         (pkt->hdr.cmd != REPLY_TX);
 962
 963                 /* Based on type of command response or notification,
 964                  *   handle those that need handling via function in
 965                  *   rx_handlers table.  See iwl_setup_rx_handlers() */
 966                 if (priv->rx_handlers[pkt->hdr.cmd]) {
 967                         IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 968                                 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 969                         priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 970                         priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 971                 } else {
 972                         /* No handling needed */
 973                         IWL_DEBUG_RX(priv,
 974                                 "r %d i %d No handler needed for %s, 0x%02x\n",
 975                                 r, i, get_cmd_string(pkt->hdr.cmd),
 976                                 pkt->hdr.cmd);
 977                 }
 978
 979                 /*
 980                  * XXX: After here, we should always check rxb->page
 981                  * against NULL before touching it or its virtual
 982                  * memory (pkt). Because some rx_handler might have
 983                  * already taken or freed the pages.
 984                  */
 985
 986                 if (reclaim) {
 987                         /* Invoke any callbacks, transfer the buffer to caller,
 988                          * and fire off the (possibly) blocking iwl_send_cmd()
 989                          * as we reclaim the driver command queue */
 990                         if (rxb->page)
 991                                 iwl_tx_cmd_complete(priv, rxb);
 992                         else
 993                                 IWL_WARN(priv, "Claim null rxb?\n");
 994                 }
 995
 996                 /* Reuse the page if possible. For notification packets and
 997                  * SKBs that fail to Rx correctly, add them back into the
 998                  * rx_free list for reuse later. */
 999                 spin_lock_irqsave(&rxq->lock, flags);
1000                 if (rxb->page != NULL) {
1001                         rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1002                                 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1003                                 PCI_DMA_FROMDEVICE);
1004                         list_add_tail(&rxb->list, &rxq->rx_free);
1005                         rxq->free_count++;
1006                 } else
1007                         list_add_tail(&rxb->list, &rxq->rx_used);
1008
1009                 spin_unlock_irqrestore(&rxq->lock, flags);
1010
1011                 i = (i + 1) & RX_QUEUE_MASK;
1012                 /* If there are a lot of unused frames,
1013                  * restock the Rx queue so ucode wont assert. */
1014                 if (fill_rx) {
1015                         count++;
1016                         if (count >= 8) {
1017                                 rxq->read = i;
1018                                 iwl_rx_replenish_now(priv);
1019                                 count = 0;
1020                         }
1021                 }
1022         }
1023
1024         /* Backtrack one entry */
1025         rxq->read = i;
1026         if (fill_rx)
1027                 iwl_rx_replenish_now(priv);
1028         else
1029                 iwl_rx_queue_restock(priv);
1030 }
1031
1032 /* call this function to flush any scheduled tasklet */
1033 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1034 {
1035         /* wait to make sure we flush pending tasklet*/
1036         synchronize_irq(priv->pci_dev->irq);
1037         tasklet_kill(&priv->irq_tasklet);
1038 }
1039
1040 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1041 {
1042         u32 inta, handled = 0;
1043         u32 inta_fh;
1044         unsigned long flags;
1045         u32 i;
1046 #ifdef CONFIG_IWLWIFI_DEBUG
1047         u32 inta_mask;
1048 #endif
1049
1050         spin_lock_irqsave(&priv->lock, flags);
1051
1052         /* Ack/clear/reset pending uCode interrupts.
1053          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1054          *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1055         inta = iwl_read32(priv, CSR_INT);
1056         iwl_write32(priv, CSR_INT, inta);
1057
1058         /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1059          * Any new interrupts that happen after this, either while we're
1060          * in this tasklet, or later, will show up in next ISR/tasklet. */
1061         inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1062         iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1063
1064 #ifdef CONFIG_IWLWIFI_DEBUG
1065         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1066                 /* just for debug */
1067                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1068                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1069                               inta, inta_mask, inta_fh);
1070         }
1071 #endif
1072
1073         spin_unlock_irqrestore(&priv->lock, flags);
1074
1075         /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1076          * atomic, make sure that inta covers all the interrupts that
1077          * we've discovered, even if FH interrupt came in just after
1078          * reading CSR_INT. */
1079         if (inta_fh & CSR49_FH_INT_RX_MASK)
1080                 inta |= CSR_INT_BIT_FH_RX;
1081         if (inta_fh & CSR49_FH_INT_TX_MASK)
1082                 inta |= CSR_INT_BIT_FH_TX;
1083
1084         /* Now service all interrupt bits discovered above. */
1085         if (inta & CSR_INT_BIT_HW_ERR) {
1086                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1087
1088                 /* Tell the device to stop sending interrupts */
1089                 iwl_disable_interrupts(priv);
1090
1091                 priv->isr_stats.hw++;
1092                 iwl_irq_handle_error(priv);
1093
1094                 handled |= CSR_INT_BIT_HW_ERR;
1095
1096                 return;
1097         }
1098
1099 #ifdef CONFIG_IWLWIFI_DEBUG
1100         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1101                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1102                 if (inta & CSR_INT_BIT_SCD) {
1103                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1104                                       "the frame/frames.\n");
1105                         priv->isr_stats.sch++;
1106                 }
1107
1108                 /* Alive notification via Rx interrupt will do the real work */
1109                 if (inta & CSR_INT_BIT_ALIVE) {
1110                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1111                         priv->isr_stats.alive++;
1112                 }
1113         }
1114 #endif
1115         /* Safely ignore these bits for debug checks below */
1116         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1117
1118         /* HW RF KILL switch toggled */
1119         if (inta & CSR_INT_BIT_RF_KILL) {
1120                 int hw_rf_kill = 0;
1121                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1122                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1123                         hw_rf_kill = 1;
1124
1125                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1126                                 hw_rf_kill ? "disable radio" : "enable radio");
1127
1128                 priv->isr_stats.rfkill++;
1129
1130                 /* driver only loads ucode once setting the interface up.
1131                  * the driver allows loading the ucode even if the radio
1132                  * is killed. Hence update the killswitch state here. The
1133                  * rfkill handler will care about restarting if needed.
1134                  */
1135                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1136                         if (hw_rf_kill)
1137                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1138                         else
1139                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1140                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1141                 }
1142
1143                 handled |= CSR_INT_BIT_RF_KILL;
1144         }
1145
1146         /* Chip got too hot and stopped itself */
1147         if (inta & CSR_INT_BIT_CT_KILL) {
1148                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1149                 priv->isr_stats.ctkill++;
1150                 handled |= CSR_INT_BIT_CT_KILL;
1151         }
1152
1153         /* Error detected by uCode */
1154         if (inta & CSR_INT_BIT_SW_ERR) {
1155                 IWL_ERR(priv, "Microcode SW error detected. "
1156                         " Restarting 0x%X.\n", inta);
1157                 priv->isr_stats.sw++;
1158                 priv->isr_stats.sw_err = inta;
1159                 iwl_irq_handle_error(priv);
1160                 handled |= CSR_INT_BIT_SW_ERR;
1161         }
1162
1163         /*
1164          * uCode wakes up after power-down sleep.
1165          * Tell device about any new tx or host commands enqueued,
1166          * and about any Rx buffers made available while asleep.
1167          */
1168         if (inta & CSR_INT_BIT_WAKEUP) {
1169                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1170                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1171                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1172                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1173                 priv->isr_stats.wakeup++;
1174                 handled |= CSR_INT_BIT_WAKEUP;
1175         }
1176
1177         /* All uCode command responses, including Tx command responses,
1178          * Rx "responses" (frame-received notification), and other
1179          * notifications from uCode come through here*/
1180         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1181                 iwl_rx_handle(priv);
1182                 priv->isr_stats.rx++;
1183                 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1184         }
1185
1186         /* This "Tx" DMA channel is used only for loading uCode */
1187         if (inta & CSR_INT_BIT_FH_TX) {
1188                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1189                 priv->isr_stats.tx++;
1190                 handled |= CSR_INT_BIT_FH_TX;
1191                 /* Wake up uCode load routine, now that load is complete */
1192                 priv->ucode_write_complete = 1;
1193                 wake_up_interruptible(&priv->wait_command_queue);
1194         }
1195
1196         if (inta & ~handled) {
1197                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1198                 priv->isr_stats.unhandled++;
1199         }
1200
1201         if (inta & ~(priv->inta_mask)) {
1202                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1203                          inta & ~priv->inta_mask);
1204                 IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
1205         }
1206
1207         /* Re-enable all interrupts */
1208         /* only Re-enable if diabled by irq */
1209         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1210                 iwl_enable_interrupts(priv);
1211
1212 #ifdef CONFIG_IWLWIFI_DEBUG
1213         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1214                 inta = iwl_read32(priv, CSR_INT);
1215                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1216                 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1217                 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1218                         "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1219         }
1220 #endif
1221 }
1222
1223 /* tasklet for iwlagn interrupt */
1224 static void iwl_irq_tasklet(struct iwl_priv *priv)
1225 {
1226         u32 inta = 0;
1227         u32 handled = 0;
1228         unsigned long flags;
1229         u32 i;
1230 #ifdef CONFIG_IWLWIFI_DEBUG
1231         u32 inta_mask;
1232 #endif
1233
1234         spin_lock_irqsave(&priv->lock, flags);
1235
1236         /* Ack/clear/reset pending uCode interrupts.
1237          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1238          */
1239         iwl_write32(priv, CSR_INT, priv->_agn.inta);
1240
1241         inta = priv->_agn.inta;
1242
1243 #ifdef CONFIG_IWLWIFI_DEBUG
1244         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1245                 /* just for debug */
1246                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1247                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1248                                 inta, inta_mask);
1249         }
1250 #endif
1251
1252         spin_unlock_irqrestore(&priv->lock, flags);
1253
1254         /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1255         priv->_agn.inta = 0;
1256
1257         /* Now service all interrupt bits discovered above. */
1258         if (inta & CSR_INT_BIT_HW_ERR) {
1259                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1260
1261                 /* Tell the device to stop sending interrupts */
1262                 iwl_disable_interrupts(priv);
1263
1264                 priv->isr_stats.hw++;
1265                 iwl_irq_handle_error(priv);
1266
1267                 handled |= CSR_INT_BIT_HW_ERR;
1268
1269                 return;
1270         }
1271
1272 #ifdef CONFIG_IWLWIFI_DEBUG
1273         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1274                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1275                 if (inta & CSR_INT_BIT_SCD) {
1276                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1277                                       "the frame/frames.\n");
1278                         priv->isr_stats.sch++;
1279                 }
1280
1281                 /* Alive notification via Rx interrupt will do the real work */
1282                 if (inta & CSR_INT_BIT_ALIVE) {
1283                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1284                         priv->isr_stats.alive++;
1285                 }
1286         }
1287 #endif
1288         /* Safely ignore these bits for debug checks below */
1289         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1290
1291         /* HW RF KILL switch toggled */
1292         if (inta & CSR_INT_BIT_RF_KILL) {
1293                 int hw_rf_kill = 0;
1294                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1295                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1296                         hw_rf_kill = 1;
1297
1298                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1299                                 hw_rf_kill ? "disable radio" : "enable radio");
1300
1301                 priv->isr_stats.rfkill++;
1302
1303                 /* driver only loads ucode once setting the interface up.
1304                  * the driver allows loading the ucode even if the radio
1305                  * is killed. Hence update the killswitch state here. The
1306                  * rfkill handler will care about restarting if needed.
1307                  */
1308                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1309                         if (hw_rf_kill)
1310                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1311                         else
1312                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1313                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1314                 }
1315
1316                 handled |= CSR_INT_BIT_RF_KILL;
1317         }
1318
1319         /* Chip got too hot and stopped itself */
1320         if (inta & CSR_INT_BIT_CT_KILL) {
1321                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1322                 priv->isr_stats.ctkill++;
1323                 handled |= CSR_INT_BIT_CT_KILL;
1324         }
1325
1326         /* Error detected by uCode */
1327         if (inta & CSR_INT_BIT_SW_ERR) {
1328                 IWL_ERR(priv, "Microcode SW error detected. "
1329                         " Restarting 0x%X.\n", inta);
1330                 priv->isr_stats.sw++;
1331                 priv->isr_stats.sw_err = inta;
1332                 iwl_irq_handle_error(priv);
1333                 handled |= CSR_INT_BIT_SW_ERR;
1334         }
1335
1336         /* uCode wakes up after power-down sleep */
1337         if (inta & CSR_INT_BIT_WAKEUP) {
1338                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1339                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1340                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1341                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1342
1343                 priv->isr_stats.wakeup++;
1344
1345                 handled |= CSR_INT_BIT_WAKEUP;
1346         }
1347
1348         /* All uCode command responses, including Tx command responses,
1349          * Rx "responses" (frame-received notification), and other
1350          * notifications from uCode come through here*/
1351         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1352                         CSR_INT_BIT_RX_PERIODIC)) {
1353                 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1354                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1355                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1356                         iwl_write32(priv, CSR_FH_INT_STATUS,
1357                                         CSR49_FH_INT_RX_MASK);
1358                 }
1359                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1360                         handled |= CSR_INT_BIT_RX_PERIODIC;
1361                         iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1362                 }
1363                 /* Sending RX interrupt require many steps to be done in the
1364                  * the device:
1365                  * 1- write interrupt to current index in ICT table.
1366                  * 2- dma RX frame.
1367                  * 3- update RX shared data to indicate last write index.
1368                  * 4- send interrupt.
1369                  * This could lead to RX race, driver could receive RX interrupt
1370                  * but the shared data changes does not reflect this;
1371                  * periodic interrupt will detect any dangling Rx activity.
1372                  */
1373
1374                 /* Disable periodic interrupt; we use it as just a one-shot. */
1375                 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1376                             CSR_INT_PERIODIC_DIS);
1377                 iwl_rx_handle(priv);
1378
1379                 /*
1380                  * Enable periodic interrupt in 8 msec only if we received
1381                  * real RX interrupt (instead of just periodic int), to catch
1382                  * any dangling Rx interrupt.  If it was just the periodic
1383                  * interrupt, there was no dangling Rx activity, and no need
1384                  * to extend the periodic interrupt; one-shot is enough.
1385                  */
1386                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1387                         iwl_write8(priv, CSR_INT_PERIODIC_REG,
1388                                     CSR_INT_PERIODIC_ENA);
1389
1390                 priv->isr_stats.rx++;
1391         }
1392
1393         /* This "Tx" DMA channel is used only for loading uCode */
1394         if (inta & CSR_INT_BIT_FH_TX) {
1395                 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1396                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1397                 priv->isr_stats.tx++;
1398                 handled |= CSR_INT_BIT_FH_TX;
1399                 /* Wake up uCode load routine, now that load is complete */
1400                 priv->ucode_write_complete = 1;
1401                 wake_up_interruptible(&priv->wait_command_queue);
1402         }
1403
1404         if (inta & ~handled) {
1405                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1406                 priv->isr_stats.unhandled++;
1407         }
1408
1409         if (inta & ~(priv->inta_mask)) {
1410                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1411                          inta & ~priv->inta_mask);
1412         }
1413
1414         /* Re-enable all interrupts */
1415         /* only Re-enable if diabled by irq */
1416         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1417                 iwl_enable_interrupts(priv);
1418 }
1419
1420
1421 /******************************************************************************
1422  *
1423  * uCode download functions
1424  *
1425  ******************************************************************************/
1426
1427 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1428 {
1429         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1430         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1431         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1432         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1433         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1434         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1435 }
1436
1437 static void iwl_nic_start(struct iwl_priv *priv)
1438 {
1439         /* Remove all resets to allow NIC to operate */
1440         iwl_write32(priv, CSR_RESET, 0);
1441 }
1442
1443
1444 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1445 static int iwl_mac_setup_register(struct iwl_priv *priv);
1446
1447 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1448 {
1449         const char *name_pre = priv->cfg->fw_name_pre;
1450
1451         if (first)
1452                 priv->fw_index = priv->cfg->ucode_api_max;
1453         else
1454                 priv->fw_index--;
1455
1456         if (priv->fw_index < priv->cfg->ucode_api_min) {
1457                 IWL_ERR(priv, "no suitable firmware found!\n");
1458                 return -ENOENT;
1459         }
1460
1461         sprintf(priv->firmware_name, "%s%d%s",
1462                 name_pre, priv->fw_index, ".ucode");
1463
1464         IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1465                        priv->firmware_name);
1466
1467         return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1468                                        &priv->pci_dev->dev, GFP_KERNEL, priv,
1469                                        iwl_ucode_callback);
1470 }
1471
1472 /**
1473  * iwl_ucode_callback - callback when firmware was loaded
1474  *
1475  * If loaded successfully, copies the firmware into buffers
1476  * for the card to fetch (via DMA).
1477  */
1478 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1479 {
1480         struct iwl_priv *priv = context;
1481         struct iwl_ucode_header *ucode;
1482         const unsigned int api_max = priv->cfg->ucode_api_max;
1483         const unsigned int api_min = priv->cfg->ucode_api_min;
1484         u8 *src;
1485         size_t len;
1486         u32 api_ver, build;
1487         u32 inst_size, data_size, init_size, init_data_size, boot_size;
1488         int err;
1489         u16 eeprom_ver;
1490
1491         if (!ucode_raw) {
1492                 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1493                         priv->firmware_name);
1494                 goto try_again;
1495         }
1496
1497         IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1498                        priv->firmware_name, ucode_raw->size);
1499
1500         /* Make sure that we got at least the v1 header! */
1501         if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
1502                 IWL_ERR(priv, "File size way too small!\n");
1503                 goto try_again;
1504         }
1505
1506         /* Data from ucode file:  header followed by uCode images */
1507         ucode = (struct iwl_ucode_header *)ucode_raw->data;
1508
1509         priv->ucode_ver = le32_to_cpu(ucode->ver);
1510         api_ver = IWL_UCODE_API(priv->ucode_ver);
1511         build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
1512         inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
1513         data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
1514         init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
1515         init_data_size =
1516                 priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
1517         boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
1518         src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
1519
1520         /* api_ver should match the api version forming part of the
1521          * firmware filename ... but we don't check for that and only rely
1522          * on the API version read from firmware header from here on forward */
1523
1524         if (api_ver < api_min || api_ver > api_max) {
1525                 IWL_ERR(priv, "Driver unable to support your firmware API. "
1526                           "Driver supports v%u, firmware is v%u.\n",
1527                           api_max, api_ver);
1528                 goto try_again;
1529         }
1530
1531         if (api_ver != api_max)
1532                 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
1533                           "got v%u. New firmware can be obtained "
1534                           "from http://www.intellinuxwireless.org.\n",
1535                           api_max, api_ver);
1536
1537         IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
1538                IWL_UCODE_MAJOR(priv->ucode_ver),
1539                IWL_UCODE_MINOR(priv->ucode_ver),
1540                IWL_UCODE_API(priv->ucode_ver),
1541                IWL_UCODE_SERIAL(priv->ucode_ver));
1542
1543         snprintf(priv->hw->wiphy->fw_version,
1544                  sizeof(priv->hw->wiphy->fw_version),
1545                  "%u.%u.%u.%u",
1546                  IWL_UCODE_MAJOR(priv->ucode_ver),
1547                  IWL_UCODE_MINOR(priv->ucode_ver),
1548                  IWL_UCODE_API(priv->ucode_ver),
1549                  IWL_UCODE_SERIAL(priv->ucode_ver));
1550
1551         if (build)
1552                 IWL_DEBUG_INFO(priv, "Build %u\n", build);
1553
1554         eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
1555         IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
1556                        (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
1557                        ? "OTP" : "EEPROM", eeprom_ver);
1558
1559         IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1560                        priv->ucode_ver);
1561         IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
1562                        inst_size);
1563         IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
1564                        data_size);
1565         IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
1566                        init_size);
1567         IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
1568                        init_data_size);
1569         IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
1570                        boot_size);
1571
1572         /*
1573          * For any of the failures below (before allocating pci memory)
1574          * we will try to load a version with a smaller API -- maybe the
1575          * user just got a corrupted version of the latest API.
1576          */
1577
1578         /* Verify size of file vs. image size info in file's header */
1579         if (ucode_raw->size !=
1580                 priv->cfg->ops->ucode->get_header_size(api_ver) +
1581                 inst_size + data_size + init_size +
1582                 init_data_size + boot_size) {
1583
1584                 IWL_DEBUG_INFO(priv,
1585                         "uCode file size %d does not match expected size\n",
1586                         (int)ucode_raw->size);
1587                 goto try_again;
1588         }
1589
1590         /* Verify that uCode images will fit in card's SRAM */
1591         if (inst_size > priv->hw_params.max_inst_size) {
1592                 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
1593                                inst_size);
1594                 goto try_again;
1595         }
1596
1597         if (data_size > priv->hw_params.max_data_size) {
1598                 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
1599                                 data_size);
1600                 goto try_again;
1601         }
1602         if (init_size > priv->hw_params.max_inst_size) {
1603                 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
1604                         init_size);
1605                 goto try_again;
1606         }
1607         if (init_data_size > priv->hw_params.max_data_size) {
1608                 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
1609                       init_data_size);
1610                 goto try_again;
1611         }
1612         if (boot_size > priv->hw_params.max_bsm_size) {
1613                 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
1614                         boot_size);
1615                 goto try_again;
1616         }
1617
1618         /* Allocate ucode buffers for card's bus-master loading ... */
1619
1620         /* Runtime instructions and 2 copies of data:
1621          * 1) unmodified from disk
1622          * 2) backup cache for save/restore during power-downs */
1623         priv->ucode_code.len = inst_size;
1624         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
1625
1626         priv->ucode_data.len = data_size;
1627         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
1628
1629         priv->ucode_data_backup.len = data_size;
1630         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1631
1632         if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
1633             !priv->ucode_data_backup.v_addr)
1634                 goto err_pci_alloc;
1635
1636         /* Initialization instructions and data */
1637         if (init_size && init_data_size) {
1638                 priv->ucode_init.len = init_size;
1639                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
1640
1641                 priv->ucode_init_data.len = init_data_size;
1642                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1643
1644                 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
1645                         goto err_pci_alloc;
1646         }
1647
1648         /* Bootstrap (instructions only, no data) */
1649         if (boot_size) {
1650                 priv->ucode_boot.len = boot_size;
1651                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
1652
1653                 if (!priv->ucode_boot.v_addr)
1654                         goto err_pci_alloc;
1655         }
1656
1657         /* Copy images into buffers for card's bus-master reads ... */
1658
1659         /* Runtime instructions (first block of data in file) */
1660         len = inst_size;
1661         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
1662         memcpy(priv->ucode_code.v_addr, src, len);
1663         src += len;
1664
1665         IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1666                 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
1667
1668         /* Runtime data (2nd block)
1669          * NOTE:  Copy into backup buffer will be done in iwl_up()  */
1670         len = data_size;
1671         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
1672         memcpy(priv->ucode_data.v_addr, src, len);
1673         memcpy(priv->ucode_data_backup.v_addr, src, len);
1674         src += len;
1675
1676         /* Initialization instructions (3rd block) */
1677         if (init_size) {
1678                 len = init_size;
1679                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
1680                                 len);
1681                 memcpy(priv->ucode_init.v_addr, src, len);
1682                 src += len;
1683         }
1684
1685         /* Initialization data (4th block) */
1686         if (init_data_size) {
1687                 len = init_data_size;
1688                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
1689                                len);
1690                 memcpy(priv->ucode_init_data.v_addr, src, len);
1691                 src += len;
1692         }
1693
1694         /* Bootstrap instructions (5th block) */
1695         len = boot_size;
1696         IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
1697         memcpy(priv->ucode_boot.v_addr, src, len);
1698
1699         /**************************************************
1700          * This is still part of probe() in a sense...
1701          *
1702          * 9. Setup and register with mac80211 and debugfs
1703          **************************************************/
1704         err = iwl_mac_setup_register(priv);
1705         if (err)
1706                 goto out_unbind;
1707
1708         err = iwl_dbgfs_register(priv, DRV_NAME);
1709         if (err)
1710                 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1711
1712         /* We have our copies now, allow OS release its copies */
1713         release_firmware(ucode_raw);
1714         return;
1715
1716  try_again:
1717         /* try next, if any */
1718         if (iwl_request_firmware(priv, false))
1719                 goto out_unbind;
1720         release_firmware(ucode_raw);
1721         return;
1722
1723  err_pci_alloc:
1724         IWL_ERR(priv, "failed to allocate pci memory\n");
1725         iwl_dealloc_ucode_pci(priv);
1726  out_unbind:
1727         device_release_driver(&priv->pci_dev->dev);
1728         release_firmware(ucode_raw);
1729 }
1730
1731 static const char *desc_lookup_text[] = {
1732         "OK",
1733         "FAIL",
1734         "BAD_PARAM",
1735         "BAD_CHECKSUM",
1736         "NMI_INTERRUPT_WDG",
1737         "SYSASSERT",
1738         "FATAL_ERROR",
1739         "BAD_COMMAND",
1740         "HW_ERROR_TUNE_LOCK",
1741         "HW_ERROR_TEMPERATURE",
1742         "ILLEGAL_CHAN_FREQ",
1743         "VCC_NOT_STABLE",
1744         "FH_ERROR",
1745         "NMI_INTERRUPT_HOST",
1746         "NMI_INTERRUPT_ACTION_PT",
1747         "NMI_INTERRUPT_UNKNOWN",
1748         "UCODE_VERSION_MISMATCH",
1749         "HW_ERROR_ABS_LOCK",
1750         "HW_ERROR_CAL_LOCK_FAIL",
1751         "NMI_INTERRUPT_INST_ACTION_PT",
1752         "NMI_INTERRUPT_DATA_ACTION_PT",
1753         "NMI_TRM_HW_ER",
1754         "NMI_INTERRUPT_TRM",
1755         "NMI_INTERRUPT_BREAK_POINT"
1756         "DEBUG_0",
1757         "DEBUG_1",
1758         "DEBUG_2",
1759         "DEBUG_3",
1760         "ADVANCED SYSASSERT"
1761 };
1762
1763 static const char *desc_lookup(int i)
1764 {
1765         int max = ARRAY_SIZE(desc_lookup_text) - 1;
1766
1767         if (i < 0 || i > max)
1768                 i = max;
1769
1770         return desc_lookup_text[i];
1771 }
1772
1773 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1774 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1775
1776 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1777 {
1778         u32 data2, line;
1779         u32 desc, time, count, base, data1;
1780         u32 blink1, blink2, ilink1, ilink2;
1781
1782         if (priv->ucode_type == UCODE_INIT)
1783                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1784         else
1785                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1786
1787         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1788                 IWL_ERR(priv,
1789                         "Not valid error log pointer 0x%08X for %s uCode\n",
1790                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1791                 return;
1792         }
1793
1794         count = iwl_read_targ_mem(priv, base);
1795
1796         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1797                 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1798                 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1799                         priv->status, count);
1800         }
1801
1802         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1803         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1804         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1805         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1806         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1807         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1808         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1809         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1810         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1811
1812         trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
1813                                       blink1, blink2, ilink1, ilink2);
1814
1815         IWL_ERR(priv, "Desc                               Time       "
1816                 "data1      data2      line\n");
1817         IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1818                 desc_lookup(desc), desc, time, data1, data2, line);
1819         IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
1820         IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
1821                 ilink1, ilink2);
1822
1823 }
1824
1825 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1826
1827 /**
1828  * iwl_print_event_log - Dump error event log to syslog
1829  *
1830  */
1831 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1832                                u32 num_events, u32 mode,
1833                                int pos, char **buf, size_t bufsz)
1834 {
1835         u32 i;
1836         u32 base;       /* SRAM byte address of event log header */
1837         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1838         u32 ptr;        /* SRAM byte address of log data */
1839         u32 ev, time, data; /* event log data */
1840         unsigned long reg_flags;
1841
1842         if (num_events == 0)
1843                 return pos;
1844         if (priv->ucode_type == UCODE_INIT)
1845                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1846         else
1847                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1848
1849         if (mode == 0)
1850                 event_size = 2 * sizeof(u32);
1851         else
1852                 event_size = 3 * sizeof(u32);
1853
1854         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1855
1856         /* Make sure device is powered up for SRAM reads */
1857         spin_lock_irqsave(&priv->reg_lock, reg_flags);
1858         iwl_grab_nic_access(priv);
1859
1860         /* Set starting address; reads will auto-increment */
1861         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
1862         rmb();
1863
1864         /* "time" is actually "data" for mode 0 (no timestamp).
1865         * place event id # at far right for easier visual parsing. */
1866         for (i = 0; i < num_events; i++) {
1867                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1868                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1869                 if (mode == 0) {
1870                         /* data, ev */
1871                         if (bufsz) {
1872                                 pos += scnprintf(*buf + pos, bufsz - pos,
1873                                                 "EVT_LOG:0x%08x:%04u\n",
1874                                                 time, ev);
1875                         } else {
1876                                 trace_iwlwifi_dev_ucode_event(priv, 0,
1877                                         time, ev);
1878                                 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1879                                         time, ev);
1880                         }
1881                 } else {
1882                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1883                         if (bufsz) {
1884                                 pos += scnprintf(*buf + pos, bufsz - pos,
1885                                                 "EVT_LOGT:%010u:0x%08x:%04u\n",
1886                                                  time, data, ev);
1887                         } else {
1888                                 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1889                                         time, data, ev);
1890                                 trace_iwlwifi_dev_ucode_event(priv, time,
1891                                         data, ev);
1892                         }
1893                 }
1894         }
1895
1896         /* Allow device to power down */
1897         iwl_release_nic_access(priv);
1898         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1899         return pos;
1900 }
1901
1902 /**
1903  * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1904  */
1905 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1906                                     u32 num_wraps, u32 next_entry,
1907                                     u32 size, u32 mode,
1908                                     int pos, char **buf, size_t bufsz)
1909 {
1910         /*
1911          * display the newest DEFAULT_LOG_ENTRIES entries
1912          * i.e the entries just before the next ont that uCode would fill.
1913          */
1914         if (num_wraps) {
1915                 if (next_entry < size) {
1916                         pos = iwl_print_event_log(priv,
1917                                                 capacity - (size - next_entry),
1918                                                 size - next_entry, mode,
1919                                                 pos, buf, bufsz);
1920                         pos = iwl_print_event_log(priv, 0,
1921                                                   next_entry, mode,
1922                                                   pos, buf, bufsz);
1923                 } else
1924                         pos = iwl_print_event_log(priv, next_entry - size,
1925                                                   size, mode, pos, buf, bufsz);
1926         } else {
1927                 if (next_entry < size) {
1928                         pos = iwl_print_event_log(priv, 0, next_entry,
1929                                                   mode, pos, buf, bufsz);
1930                 } else {
1931                         pos = iwl_print_event_log(priv, next_entry - size,
1932                                                   size, mode, pos, buf, bufsz);
1933                 }
1934         }
1935         return pos;
1936 }
1937
1938 /* For sanity check only.  Actual size is determined by uCode, typ. 512 */
1939 #define MAX_EVENT_LOG_SIZE (512)
1940
1941 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1942
1943 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
1944                             char **buf, bool display)
1945 {
1946         u32 base;       /* SRAM byte address of event log header */
1947         u32 capacity;   /* event log capacity in # entries */
1948         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
1949         u32 num_wraps;  /* # times uCode wrapped to top of log */
1950         u32 next_entry; /* index of next entry to be written by uCode */
1951         u32 size;       /* # entries that we'll print */
1952         int pos = 0;
1953         size_t bufsz = 0;
1954
1955         if (priv->ucode_type == UCODE_INIT)
1956                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1957         else
1958                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1959
1960         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1961                 IWL_ERR(priv,
1962                         "Invalid event log pointer 0x%08X for %s uCode\n",
1963                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1964                 return -EINVAL;
1965         }
1966
1967         /* event log header */
1968         capacity = iwl_read_targ_mem(priv, base);
1969         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1970         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1971         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1972
1973         if (capacity > MAX_EVENT_LOG_SIZE) {
1974                 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
1975                         capacity, MAX_EVENT_LOG_SIZE);
1976                 capacity = MAX_EVENT_LOG_SIZE;
1977         }
1978
1979         if (next_entry > MAX_EVENT_LOG_SIZE) {
1980                 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
1981                         next_entry, MAX_EVENT_LOG_SIZE);
1982                 next_entry = MAX_EVENT_LOG_SIZE;
1983         }
1984
1985         size = num_wraps ? capacity : next_entry;
1986
1987         /* bail out if nothing in log */
1988         if (size == 0) {
1989                 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
1990                 return pos;
1991         }
1992
1993 #ifdef CONFIG_IWLWIFI_DEBUG
1994         if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
1995                 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1996                         ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1997 #else
1998         size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1999                 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2000 #endif
2001         IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2002                 size);
2003
2004 #ifdef CONFIG_IWLWIFI_DEBUG
2005         if (display) {
2006                 if (full_log)
2007                         bufsz = capacity * 48;
2008                 else
2009                         bufsz = size * 48;
2010                 *buf = kmalloc(bufsz, GFP_KERNEL);
2011                 if (!*buf)
2012                         return -ENOMEM;
2013         }
2014         if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2015                 /*
2016                  * if uCode has wrapped back to top of log,
2017                  * start at the oldest entry,
2018                  * i.e the next one that uCode would fill.
2019                  */
2020                 if (num_wraps)
2021                         pos = iwl_print_event_log(priv, next_entry,
2022                                                 capacity - next_entry, mode,
2023                                                 pos, buf, bufsz);
2024                 /* (then/else) start at top of log */
2025                 pos = iwl_print_event_log(priv, 0,
2026                                           next_entry, mode, pos, buf, bufsz);
2027         } else
2028                 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2029                                                 next_entry, size, mode,
2030                                                 pos, buf, bufsz);
2031 #else
2032         pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2033                                         next_entry, size, mode,
2034                                         pos, buf, bufsz);
2035 #endif
2036         return pos;
2037 }
2038
2039 /**
2040  * iwl_alive_start - called after REPLY_ALIVE notification received
2041  *                   from protocol/runtime uCode (initialization uCode's
2042  *                   Alive gets handled by iwl_init_alive_start()).
2043  */
2044 static void iwl_alive_start(struct iwl_priv *priv)
2045 {
2046         int ret = 0;
2047
2048         IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2049
2050         if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2051                 /* We had an error bringing up the hardware, so take it
2052                  * all the way back down so we can try again */
2053                 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2054                 goto restart;
2055         }
2056
2057         /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2058          * This is a paranoid check, because we would not have gotten the
2059          * "runtime" alive if code weren't properly loaded.  */
2060         if (iwl_verify_ucode(priv)) {
2061                 /* Runtime instruction load was bad;
2062                  * take it all the way back down so we can try again */
2063                 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2064                 goto restart;
2065         }
2066
2067         ret = priv->cfg->ops->lib->alive_notify(priv);
2068         if (ret) {
2069                 IWL_WARN(priv,
2070                         "Could not complete ALIVE transition [ntf]: %d\n", ret);
2071                 goto restart;
2072         }
2073
2074         /* After the ALIVE response, we can send host commands to the uCode */
2075         set_bit(STATUS_ALIVE, &priv->status);
2076
2077         if (iwl_is_rfkill(priv))
2078                 return;
2079
2080         ieee80211_wake_queues(priv->hw);
2081
2082         priv->active_rate = IWL_RATES_MASK;
2083
2084         /* Configure Tx antenna selection based on H/W config */
2085         if (priv->cfg->ops->hcmd->set_tx_ant)
2086                 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2087
2088         if (iwl_is_associated(priv)) {
2089                 struct iwl_rxon_cmd *active_rxon =
2090                                 (struct iwl_rxon_cmd *)&priv->active_rxon;
2091                 /* apply any changes in staging */
2092                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2093                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2094         } else {
2095                 /* Initialize our rx_config data */
2096                 iwl_connection_init_rx_config(priv, priv->iw_mode);
2097
2098                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2099                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2100
2101                 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2102         }
2103
2104         /* Configure Bluetooth device coexistence support */
2105         iwl_send_bt_config(priv);
2106
2107         iwl_reset_run_time_calib(priv);
2108
2109         /* Configure the adapter for unassociated operation */
2110         iwlcore_commit_rxon(priv);
2111
2112         /* At this point, the NIC is initialized and operational */
2113         iwl_rf_kill_ct_config(priv);
2114
2115         iwl_leds_init(priv);
2116
2117         IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2118         set_bit(STATUS_READY, &priv->status);
2119         wake_up_interruptible(&priv->wait_command_queue);
2120
2121         iwl_power_update_mode(priv, true);
2122         IWL_DEBUG_INFO(priv, "Updated power mode\n");
2123
2124
2125         return;
2126
2127  restart:
2128         queue_work(priv->workqueue, &priv->restart);
2129 }
2130
2131 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2132
2133 static void __iwl_down(struct iwl_priv *priv)
2134 {
2135         unsigned long flags;
2136         int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2137
2138         IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2139
2140         if (!exit_pending)
2141                 set_bit(STATUS_EXIT_PENDING, &priv->status);
2142
2143         iwl_clear_ucode_stations(priv, true);
2144
2145         /* Unblock any waiting calls */
2146         wake_up_interruptible_all(&priv->wait_command_queue);
2147
2148         /* Wipe out the EXIT_PENDING status bit if we are not actually
2149          * exiting the module */
2150         if (!exit_pending)
2151                 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2152
2153         /* stop and reset the on-board processor */
2154         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2155
2156         /* tell the device to stop sending interrupts */
2157         spin_lock_irqsave(&priv->lock, flags);
2158         iwl_disable_interrupts(priv);
2159         spin_unlock_irqrestore(&priv->lock, flags);
2160         iwl_synchronize_irq(priv);
2161
2162         if (priv->mac80211_registered)
2163                 ieee80211_stop_queues(priv->hw);
2164
2165         /* If we have not previously called iwl_init() then
2166          * clear all bits but the RF Kill bit and return */
2167         if (!iwl_is_init(priv)) {
2168                 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2169                                         STATUS_RF_KILL_HW |
2170                                test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2171                                         STATUS_GEO_CONFIGURED |
2172                                test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2173                                         STATUS_EXIT_PENDING;
2174                 goto exit;
2175         }
2176
2177         /* ...otherwise clear out all the status bits but the RF Kill
2178          * bit and continue taking the NIC down. */
2179         priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2180                                 STATUS_RF_KILL_HW |
2181                         test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2182                                 STATUS_GEO_CONFIGURED |
2183                         test_bit(STATUS_FW_ERROR, &priv->status) <<
2184                                 STATUS_FW_ERROR |
2185                        test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2186                                 STATUS_EXIT_PENDING;
2187
2188         /* device going down, Stop using ICT table */
2189         iwl_disable_ict(priv);
2190
2191         iwl_txq_ctx_stop(priv);
2192         iwl_rxq_stop(priv);
2193
2194         /* Power-down device's busmaster DMA clocks */
2195         iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2196         udelay(5);
2197
2198         /* Make sure (redundant) we've released our request to stay awake */
2199         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2200
2201         /* Stop the device, and put it in low power state */
2202         priv->cfg->ops->lib->apm_ops.stop(priv);
2203
2204  exit:
2205         memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2206
2207         if (priv->ibss_beacon)
2208                 dev_kfree_skb(priv->ibss_beacon);
2209         priv->ibss_beacon = NULL;
2210
2211         /* clear out any free frames */
2212         iwl_clear_free_frames(priv);
2213 }
2214
2215 static void iwl_down(struct iwl_priv *priv)
2216 {
2217         mutex_lock(&priv->mutex);
2218         __iwl_down(priv);
2219         mutex_unlock(&priv->mutex);
2220
2221         iwl_cancel_deferred_work(priv);
2222 }
2223
2224 #define HW_READY_TIMEOUT (50)
2225
2226 static int iwl_set_hw_ready(struct iwl_priv *priv)
2227 {
2228         int ret = 0;
2229
2230         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2231                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2232
2233         /* See if we got it */
2234         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2235                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2236                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2237                                 HW_READY_TIMEOUT);
2238         if (ret != -ETIMEDOUT)
2239                 priv->hw_ready = true;
2240         else
2241                 priv->hw_ready = false;
2242
2243         IWL_DEBUG_INFO(priv, "hardware %s\n",
2244                       (priv->hw_ready == 1) ? "ready" : "not ready");
2245         return ret;
2246 }
2247
2248 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2249 {
2250         int ret = 0;
2251
2252         IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
2253
2254         ret = iwl_set_hw_ready(priv);
2255         if (priv->hw_ready)
2256                 return ret;
2257
2258         /* If HW is not ready, prepare the conditions to check again */
2259         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2260                         CSR_HW_IF_CONFIG_REG_PREPARE);
2261
2262         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2263                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2264                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2265
2266         /* HW should be ready by now, check again. */
2267         if (ret != -ETIMEDOUT)
2268                 iwl_set_hw_ready(priv);
2269
2270         return ret;
2271 }
2272
2273 #define MAX_HW_RESTARTS 5
2274
2275 static int __iwl_up(struct iwl_priv *priv)
2276 {
2277         int i;
2278         int ret;
2279
2280         if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2281                 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2282                 return -EIO;
2283         }
2284
2285         if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2286                 IWL_ERR(priv, "ucode not available for device bringup\n");
2287                 return -EIO;
2288         }
2289
2290         iwl_prepare_card_hw(priv);
2291
2292         if (!priv->hw_ready) {
2293                 IWL_WARN(priv, "Exit HW not ready\n");
2294                 return -EIO;
2295         }
2296
2297         /* If platform's RF_KILL switch is NOT set to KILL */
2298         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2299                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2300         else
2301                 set_bit(STATUS_RF_KILL_HW, &priv->status);
2302
2303         if (iwl_is_rfkill(priv)) {
2304                 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2305
2306                 iwl_enable_interrupts(priv);
2307                 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2308                 return 0;
2309         }
2310
2311         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2312
2313         ret = iwl_hw_nic_init(priv);
2314         if (ret) {
2315                 IWL_ERR(priv, "Unable to init nic\n");
2316                 return ret;
2317         }
2318
2319         /* make sure rfkill handshake bits are cleared */
2320         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2321         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2322                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2323
2324         /* clear (again), then enable host interrupts */
2325         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2326         iwl_enable_interrupts(priv);
2327
2328         /* really make sure rfkill handshake bits are cleared */
2329         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2330         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2331
2332         /* Copy original ucode data image from disk into backup cache.
2333          * This will be used to initialize the on-board processor's
2334          * data SRAM for a clean start when the runtime program first loads. */
2335         memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2336                priv->ucode_data.len);
2337
2338         for (i = 0; i < MAX_HW_RESTARTS; i++) {
2339
2340                 /* load bootstrap state machine,
2341                  * load bootstrap program into processor's memory,
2342                  * prepare to load the "initialize" uCode */
2343                 ret = priv->cfg->ops->lib->load_ucode(priv);
2344
2345                 if (ret) {
2346                         IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2347                                 ret);
2348                         continue;
2349                 }
2350
2351                 /* start card; "initialize" will load runtime ucode */
2352                 iwl_nic_start(priv);
2353
2354                 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2355
2356                 return 0;
2357         }
2358
2359         set_bit(STATUS_EXIT_PENDING, &priv->status);
2360         __iwl_down(priv);
2361         clear_bit(STATUS_EXIT_PENDING, &priv->status);
2362
2363         /* tried to restart and config the device for as long as our
2364          * patience could withstand */
2365         IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2366         return -EIO;
2367 }
2368
2369
2370 /*****************************************************************************
2371  *
2372  * Workqueue callbacks
2373  *
2374  *****************************************************************************/
2375
2376 static void iwl_bg_init_alive_start(struct work_struct *data)
2377 {
2378         struct iwl_priv *priv =
2379             container_of(data, struct iwl_priv, init_alive_start.work);
2380
2381         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2382                 return;
2383
2384         mutex_lock(&priv->mutex);
2385         priv->cfg->ops->lib->init_alive_start(priv);
2386         mutex_unlock(&priv->mutex);
2387 }
2388
2389 static void iwl_bg_alive_start(struct work_struct *data)
2390 {
2391         struct iwl_priv *priv =
2392             container_of(data, struct iwl_priv, alive_start.work);
2393
2394         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2395                 return;
2396
2397         /* enable dram interrupt */
2398         iwl_reset_ict(priv);
2399
2400         mutex_lock(&priv->mutex);
2401         iwl_alive_start(priv);
2402         mutex_unlock(&priv->mutex);
2403 }
2404
2405 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2406 {
2407         struct iwl_priv *priv = container_of(work, struct iwl_priv,
2408                         run_time_calib_work);
2409
2410         mutex_lock(&priv->mutex);
2411
2412         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2413             test_bit(STATUS_SCANNING, &priv->status)) {
2414                 mutex_unlock(&priv->mutex);
2415                 return;
2416         }
2417
2418         if (priv->start_calib) {
2419                 iwl_chain_noise_calibration(priv, &priv->statistics);
2420
2421                 iwl_sensitivity_calibration(priv, &priv->statistics);
2422         }
2423
2424         mutex_unlock(&priv->mutex);
2425         return;
2426 }
2427
2428 static void iwl_bg_restart(struct work_struct *data)
2429 {
2430         struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2431
2432         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2433                 return;
2434
2435         if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2436                 mutex_lock(&priv->mutex);
2437                 priv->vif = NULL;
2438                 priv->is_open = 0;
2439                 mutex_unlock(&priv->mutex);
2440                 iwl_down(priv);
2441                 ieee80211_restart_hw(priv->hw);
2442         } else {
2443                 iwl_down(priv);
2444
2445                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2446                         return;
2447
2448                 mutex_lock(&priv->mutex);
2449                 __iwl_up(priv);
2450                 mutex_unlock(&priv->mutex);
2451         }
2452 }
2453
2454 static void iwl_bg_rx_replenish(struct work_struct *data)
2455 {
2456         struct iwl_priv *priv =
2457             container_of(data, struct iwl_priv, rx_replenish);
2458
2459         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2460                 return;
2461
2462         mutex_lock(&priv->mutex);
2463         iwl_rx_replenish(priv);
2464         mutex_unlock(&priv->mutex);
2465 }
2466
2467 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2468
2469 void iwl_post_associate(struct iwl_priv *priv)
2470 {
2471         struct ieee80211_conf *conf = NULL;
2472         int ret = 0;
2473         unsigned long flags;
2474
2475         if (priv->iw_mode == NL80211_IFTYPE_AP) {
2476                 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
2477                 return;
2478         }
2479
2480         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2481                 return;
2482
2483
2484         if (!priv->vif || !priv->is_open)
2485                 return;
2486
2487         iwl_scan_cancel_timeout(priv, 200);
2488
2489         conf = ieee80211_get_hw_conf(priv->hw);
2490
2491         priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2492         iwlcore_commit_rxon(priv);
2493
2494         iwl_setup_rxon_timing(priv);
2495         ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2496                               sizeof(priv->rxon_timing), &priv->rxon_timing);
2497         if (ret)
2498                 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2499                             "Attempting to continue.\n");
2500
2501         priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2502
2503         iwl_set_rxon_ht(priv, &priv->current_ht_config);
2504
2505         if (priv->cfg->ops->hcmd->set_rxon_chain)
2506                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2507
2508         priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2509
2510         IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
2511                         priv->assoc_id, priv->beacon_int);
2512
2513         if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2514                 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2515         else
2516                 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2517
2518         if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2519                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2520                         priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2521                 else
2522                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2523
2524                 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2525                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2526
2527         }
2528
2529         iwlcore_commit_rxon(priv);
2530
2531         IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
2532                         priv->assoc_id, priv->active_rxon.bssid_addr);
2533
2534         switch (priv->iw_mode) {
2535         case NL80211_IFTYPE_STATION:
2536                 break;
2537
2538         case NL80211_IFTYPE_ADHOC:
2539
2540                 /* assume default assoc id */
2541                 priv->assoc_id = 1;
2542
2543                 iwl_add_local_station(priv, priv->bssid, true);
2544                 iwl_send_beacon_cmd(priv);
2545
2546                 break;
2547
2548         default:
2549                 IWL_ERR(priv, "%s Should not be called in %d mode\n",
2550                           __func__, priv->iw_mode);
2551                 break;
2552         }
2553
2554         spin_lock_irqsave(&priv->lock, flags);
2555         iwl_activate_qos(priv, 0);
2556         spin_unlock_irqrestore(&priv->lock, flags);
2557
2558         /* the chain noise calibration will enabled PM upon completion
2559          * If chain noise has already been run, then we need to enable
2560          * power management here */
2561         if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
2562                 iwl_power_update_mode(priv, false);
2563
2564         /* Enable Rx differential gain and sensitivity calibrations */
2565         iwl_chain_noise_reset(priv);
2566         priv->start_calib = 1;
2567
2568 }
2569
2570 /*****************************************************************************
2571  *
2572  * mac80211 entry point functions
2573  *
2574  *****************************************************************************/
2575
2576 #define UCODE_READY_TIMEOUT     (4 * HZ)
2577
2578 /*
2579  * Not a mac80211 entry point function, but it fits in with all the
2580  * other mac80211 functions grouped here.
2581  */
2582 static int iwl_mac_setup_register(struct iwl_priv *priv)
2583 {
2584         int ret;
2585         struct ieee80211_hw *hw = priv->hw;
2586         hw->rate_control_algorithm = "iwl-agn-rs";
2587
2588         /* Tell mac80211 our characteristics */
2589         hw->flags = IEEE80211_HW_SIGNAL_DBM |
2590                     IEEE80211_HW_NOISE_DBM |
2591                     IEEE80211_HW_AMPDU_AGGREGATION |
2592                     IEEE80211_HW_SPECTRUM_MGMT;
2593
2594         if (!priv->cfg->broken_powersave)
2595                 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2596                              IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2597
2598         if (priv->cfg->sku & IWL_SKU_N)
2599                 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2600                              IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2601
2602         hw->sta_data_size = sizeof(struct iwl_station_priv);
2603         hw->wiphy->interface_modes =
2604                 BIT(NL80211_IFTYPE_STATION) |
2605                 BIT(NL80211_IFTYPE_ADHOC);
2606
2607         hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
2608                             WIPHY_FLAG_DISABLE_BEACON_HINTS;
2609
2610         /*
2611          * For now, disable PS by default because it affects
2612          * RX performance significantly.
2613          */
2614         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2615
2616         hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
2617         /* we create the 802.11 header and a zero-length SSID element */
2618         hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
2619
2620         /* Default value; 4 EDCA QOS priorities */
2621         hw->queues = 4;
2622
2623         hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2624
2625         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2626                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2627                         &priv->bands[IEEE80211_BAND_2GHZ];
2628         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2629                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2630                         &priv->bands[IEEE80211_BAND_5GHZ];
2631
2632         ret = ieee80211_register_hw(priv->hw);
2633         if (ret) {
2634                 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2635                 return ret;
2636         }
2637         priv->mac80211_registered = 1;
2638
2639         return 0;
2640 }
2641
2642
2643 static int iwl_mac_start(struct ieee80211_hw *hw)
2644 {
2645         struct iwl_priv *priv = hw->priv;
2646         int ret;
2647
2648         IWL_DEBUG_MAC80211(priv, "enter\n");
2649
2650         /* we should be verifying the device is ready to be opened */
2651         mutex_lock(&priv->mutex);
2652         ret = __iwl_up(priv);
2653         mutex_unlock(&priv->mutex);
2654
2655         if (ret)
2656                 return ret;
2657
2658         if (iwl_is_rfkill(priv))
2659                 goto out;
2660
2661         IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2662
2663         /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
2664          * mac80211 will not be run successfully. */
2665         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
2666                         test_bit(STATUS_READY, &priv->status),
2667                         UCODE_READY_TIMEOUT);
2668         if (!ret) {
2669                 if (!test_bit(STATUS_READY, &priv->status)) {
2670                         IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
2671                                 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2672                         return -ETIMEDOUT;
2673                 }
2674         }
2675
2676         iwl_led_start(priv);
2677
2678 out:
2679         priv->is_open = 1;
2680         IWL_DEBUG_MAC80211(priv, "leave\n");
2681         return 0;
2682 }
2683
2684 static void iwl_mac_stop(struct ieee80211_hw *hw)
2685 {
2686         struct iwl_priv *priv = hw->priv;
2687
2688         IWL_DEBUG_MAC80211(priv, "enter\n");
2689
2690         if (!priv->is_open)
2691                 return;
2692
2693         priv->is_open = 0;
2694
2695         if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
2696                 /* stop mac, cancel any scan request and clear
2697                  * RXON_FILTER_ASSOC_MSK BIT
2698                  */
2699                 mutex_lock(&priv->mutex);
2700                 iwl_scan_cancel_timeout(priv, 100);
2701                 mutex_unlock(&priv->mutex);
2702         }
2703
2704         iwl_down(priv);
2705
2706         flush_workqueue(priv->workqueue);
2707
2708         /* enable interrupts again in order to receive rfkill changes */
2709         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2710         iwl_enable_interrupts(priv);
2711
2712         IWL_DEBUG_MAC80211(priv, "leave\n");
2713 }
2714
2715 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2716 {
2717         struct iwl_priv *priv = hw->priv;
2718
2719         IWL_DEBUG_MACDUMP(priv, "enter\n");
2720
2721         IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2722                      ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2723
2724         if (iwl_tx_skb(priv, skb))
2725                 dev_kfree_skb_any(skb);
2726
2727         IWL_DEBUG_MACDUMP(priv, "leave\n");
2728         return NETDEV_TX_OK;
2729 }
2730
2731 void iwl_config_ap(struct iwl_priv *priv)
2732 {
2733         int ret = 0;
2734         unsigned long flags;
2735
2736         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2737                 return;
2738
2739         /* The following should be done only at AP bring up */
2740         if (!iwl_is_associated(priv)) {
2741
2742                 /* RXON - unassoc (to set timing command) */
2743                 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2744                 iwlcore_commit_rxon(priv);
2745
2746                 /* RXON Timing */
2747                 iwl_setup_rxon_timing(priv);
2748                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2749                                 sizeof(priv->rxon_timing), &priv->rxon_timing);
2750                 if (ret)
2751                         IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2752                                         "Attempting to continue.\n");
2753
2754                 /* AP has all antennas */
2755                 priv->chain_noise_data.active_chains =
2756                         priv->hw_params.valid_rx_ant;
2757                 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2758                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2759                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2760
2761                 /* FIXME: what should be the assoc_id for AP? */
2762                 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2763                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2764                         priv->staging_rxon.flags |=
2765                                 RXON_FLG_SHORT_PREAMBLE_MSK;
2766                 else
2767                         priv->staging_rxon.flags &=
2768                                 ~RXON_FLG_SHORT_PREAMBLE_MSK;
2769
2770                 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2771                         if (priv->assoc_capability &
2772                                 WLAN_CAPABILITY_SHORT_SLOT_TIME)
2773                                 priv->staging_rxon.flags |=
2774                                         RXON_FLG_SHORT_SLOT_MSK;
2775                         else
2776                                 priv->staging_rxon.flags &=
2777                                         ~RXON_FLG_SHORT_SLOT_MSK;
2778
2779                         if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2780                                 priv->staging_rxon.flags &=
2781                                         ~RXON_FLG_SHORT_SLOT_MSK;
2782                 }
2783                 /* restore RXON assoc */
2784                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2785                 iwlcore_commit_rxon(priv);
2786                 iwl_reset_qos(priv);
2787                 spin_lock_irqsave(&priv->lock, flags);
2788                 iwl_activate_qos(priv, 1);
2789                 spin_unlock_irqrestore(&priv->lock, flags);
2790                 iwl_add_bcast_station(priv);
2791         }
2792         iwl_send_beacon_cmd(priv);
2793
2794         /* FIXME - we need to add code here to detect a totally new
2795          * configuration, reset the AP, unassoc, rxon timing, assoc,
2796          * clear sta table, add BCAST sta... */
2797 }
2798
2799 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
2800                                     struct ieee80211_vif *vif,
2801                                     struct ieee80211_key_conf *keyconf,
2802                                     struct ieee80211_sta *sta,
2803                                     u32 iv32, u16 *phase1key)
2804 {
2805
2806         struct iwl_priv *priv = hw->priv;
2807         IWL_DEBUG_MAC80211(priv, "enter\n");
2808
2809         iwl_update_tkip_key(priv, keyconf,
2810                             sta ? sta->addr : iwl_bcast_addr,
2811                             iv32, phase1key);
2812
2813         IWL_DEBUG_MAC80211(priv, "leave\n");
2814 }
2815
2816 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2817                            struct ieee80211_vif *vif,
2818                            struct ieee80211_sta *sta,
2819                            struct ieee80211_key_conf *key)
2820 {
2821         struct iwl_priv *priv = hw->priv;
2822         const u8 *addr;
2823         int ret;
2824         u8 sta_id;
2825         bool is_default_wep_key = false;
2826
2827         IWL_DEBUG_MAC80211(priv, "enter\n");
2828
2829         if (priv->cfg->mod_params->sw_crypto) {
2830                 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2831                 return -EOPNOTSUPP;
2832         }
2833         addr = sta ? sta->addr : iwl_bcast_addr;
2834         sta_id = iwl_find_station(priv, addr);
2835         if (sta_id == IWL_INVALID_STATION) {
2836                 IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
2837                                    addr);
2838                 return -EINVAL;
2839
2840         }
2841
2842         mutex_lock(&priv->mutex);
2843         iwl_scan_cancel_timeout(priv, 100);
2844
2845         /* If we are getting WEP group key and we didn't receive any key mapping
2846          * so far, we are in legacy wep mode (group key only), otherwise we are
2847          * in 1X mode.
2848          * In legacy wep mode, we use another host command to the uCode */
2849         if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id &&
2850                 priv->iw_mode != NL80211_IFTYPE_AP) {
2851                 if (cmd == SET_KEY)
2852                         is_default_wep_key = !priv->key_mapping_key;
2853                 else
2854                         is_default_wep_key =
2855                                         (key->hw_key_idx == HW_KEY_DEFAULT);
2856         }
2857
2858         switch (cmd) {
2859         case SET_KEY:
2860                 if (is_default_wep_key)
2861                         ret = iwl_set_default_wep_key(priv, key);
2862                 else
2863                         ret = iwl_set_dynamic_key(priv, key, sta_id);
2864
2865                 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2866                 break;
2867         case DISABLE_KEY:
2868                 if (is_default_wep_key)
2869                         ret = iwl_remove_default_wep_key(priv, key);
2870                 else
2871                         ret = iwl_remove_dynamic_key(priv, key, sta_id);
2872
2873                 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2874                 break;
2875         default:
2876                 ret = -EINVAL;
2877         }
2878
2879         mutex_unlock(&priv->mutex);
2880         IWL_DEBUG_MAC80211(priv, "leave\n");
2881
2882         return ret;
2883 }
2884
2885 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
2886                                 struct ieee80211_vif *vif,
2887                              enum ieee80211_ampdu_mlme_action action,
2888                              struct ieee80211_sta *sta, u16 tid, u16 *ssn)
2889 {
2890         struct iwl_priv *priv = hw->priv;
2891         int ret;
2892
2893         IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2894                      sta->addr, tid);
2895
2896         if (!(priv->cfg->sku & IWL_SKU_N))
2897                 return -EACCES;
2898
2899         switch (action) {
2900         case IEEE80211_AMPDU_RX_START:
2901                 IWL_DEBUG_HT(priv, "start Rx\n");
2902                 return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
2903         case IEEE80211_AMPDU_RX_STOP:
2904                 IWL_DEBUG_HT(priv, "stop Rx\n");
2905                 ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
2906                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2907                         return 0;
2908                 else
2909                         return ret;
2910         case IEEE80211_AMPDU_TX_START:
2911                 IWL_DEBUG_HT(priv, "start Tx\n");
2912                 return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
2913         case IEEE80211_AMPDU_TX_STOP:
2914                 IWL_DEBUG_HT(priv, "stop Tx\n");
2915                 ret = iwl_tx_agg_stop(priv, sta->addr, tid);
2916                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2917                         return 0;
2918                 else
2919                         return ret;
2920         case IEEE80211_AMPDU_TX_OPERATIONAL:
2921                 /* do nothing */
2922                 return -EOPNOTSUPP;
2923         default:
2924                 IWL_DEBUG_HT(priv, "unknown\n");
2925                 return -EINVAL;
2926                 break;
2927         }
2928         return 0;
2929 }
2930
2931 static int iwl_mac_get_stats(struct ieee80211_hw *hw,
2932                              struct ieee80211_low_level_stats *stats)
2933 {
2934         struct iwl_priv *priv = hw->priv;
2935
2936         priv = hw->priv;
2937         IWL_DEBUG_MAC80211(priv, "enter\n");
2938         IWL_DEBUG_MAC80211(priv, "leave\n");
2939
2940         return 0;
2941 }
2942
2943 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
2944                                struct ieee80211_vif *vif,
2945                                enum sta_notify_cmd cmd,
2946                                struct ieee80211_sta *sta)
2947 {
2948         struct iwl_priv *priv = hw->priv;
2949         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2950         int sta_id;
2951
2952         switch (cmd) {
2953         case STA_NOTIFY_SLEEP:
2954                 WARN_ON(!sta_priv->client);
2955                 sta_priv->asleep = true;
2956                 if (atomic_read(&sta_priv->pending_frames) > 0)
2957                         ieee80211_sta_block_awake(hw, sta, true);
2958                 break;
2959         case STA_NOTIFY_AWAKE:
2960                 WARN_ON(!sta_priv->client);
2961                 if (!sta_priv->asleep)
2962                         break;
2963                 sta_priv->asleep = false;
2964                 sta_id = iwl_find_station(priv, sta->addr);
2965                 if (sta_id != IWL_INVALID_STATION)
2966                         iwl_sta_modify_ps_wake(priv, sta_id);
2967                 break;
2968         default:
2969                 break;
2970         }
2971 }
2972
2973 /**
2974  * iwl_restore_wepkeys - Restore WEP keys to device
2975  */
2976 static void iwl_restore_wepkeys(struct iwl_priv *priv)
2977 {
2978         mutex_lock(&priv->mutex);
2979         if (priv->iw_mode == NL80211_IFTYPE_STATION &&
2980             priv->default_wep_key &&
2981             iwl_send_static_wepkey_cmd(priv, 0))
2982                 IWL_ERR(priv, "Could not send WEP static key\n");
2983         mutex_unlock(&priv->mutex);
2984 }
2985
2986 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
2987                               struct ieee80211_vif *vif,
2988                               struct ieee80211_sta *sta)
2989 {
2990         struct iwl_priv *priv = hw->priv;
2991         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2992         bool is_ap = priv->iw_mode == NL80211_IFTYPE_STATION;
2993         int ret;
2994         u8 sta_id;
2995
2996         IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
2997                         sta->addr);
2998
2999         atomic_set(&sta_priv->pending_frames, 0);
3000         if (vif->type == NL80211_IFTYPE_AP)
3001                 sta_priv->client = true;
3002
3003         ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
3004                                      &sta_id);
3005         if (ret) {
3006                 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
3007                         sta->addr, ret);
3008                 /* Should we return success if return code is EEXIST ? */
3009                 return ret;
3010         }
3011
3012         iwl_restore_wepkeys(priv);
3013
3014         /* Initialize rate scaling */
3015         IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
3016                        sta->addr);
3017         iwl_rs_rate_init(priv, sta, sta_id);
3018
3019         return ret;
3020 }
3021
3022 /*****************************************************************************
3023  *
3024  * sysfs attributes
3025  *
3026  *****************************************************************************/
3027
3028 #ifdef CONFIG_IWLWIFI_DEBUG
3029
3030 /*
3031  * The following adds a new attribute to the sysfs representation
3032  * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
3033  * used for controlling the debug level.
3034  *
3035  * See the level definitions in iwl for details.
3036  *
3037  * The debug_level being managed using sysfs below is a per device debug
3038  * level that is used instead of the global debug level if it (the per
3039  * device debug level) is set.
3040  */
3041 static ssize_t show_debug_level(struct device *d,
3042                                 struct device_attribute *attr, char *buf)
3043 {
3044         struct iwl_priv *priv = dev_get_drvdata(d);
3045         return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
3046 }
3047 static ssize_t store_debug_level(struct device *d,
3048                                 struct device_attribute *attr,
3049                                  const char *buf, size_t count)
3050 {
3051         struct iwl_priv *priv = dev_get_drvdata(d);
3052         unsigned long val;
3053         int ret;
3054
3055         ret = strict_strtoul(buf, 0, &val);
3056         if (ret)
3057                 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
3058         else {
3059                 priv->debug_level = val;
3060                 if (iwl_alloc_traffic_mem(priv))
3061                         IWL_ERR(priv,
3062                                 "Not enough memory to generate traffic log\n");
3063         }
3064         return strnlen(buf, count);
3065 }
3066
3067 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
3068                         show_debug_level, store_debug_level);
3069
3070
3071 #endif /* CONFIG_IWLWIFI_DEBUG */
3072
3073
3074 static ssize_t show_temperature(struct device *d,
3075                                 struct device_attribute *attr, char *buf)
3076 {
3077         struct iwl_priv *priv = dev_get_drvdata(d);
3078
3079         if (!iwl_is_alive(priv))
3080                 return -EAGAIN;
3081
3082         return sprintf(buf, "%d\n", priv->temperature);
3083 }
3084
3085 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
3086
3087 static ssize_t show_tx_power(struct device *d,
3088                              struct device_attribute *attr, char *buf)
3089 {
3090         struct iwl_priv *priv = dev_get_drvdata(d);
3091
3092         if (!iwl_is_ready_rf(priv))
3093                 return sprintf(buf, "off\n");
3094         else
3095                 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
3096 }
3097
3098 static ssize_t store_tx_power(struct device *d,
3099                               struct device_attribute *attr,
3100                               const char *buf, size_t count)
3101 {
3102         struct iwl_priv *priv = dev_get_drvdata(d);
3103         unsigned long val;
3104         int ret;
3105
3106         ret = strict_strtoul(buf, 10, &val);
3107         if (ret)
3108                 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
3109         else {
3110                 ret = iwl_set_tx_power(priv, val, false);
3111                 if (ret)
3112                         IWL_ERR(priv, "failed setting tx power (0x%d).\n",
3113                                 ret);
3114                 else
3115                         ret = count;
3116         }
3117         return ret;
3118 }
3119
3120 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
3121
3122 static ssize_t show_statistics(struct device *d,
3123                                struct device_attribute *attr, char *buf)
3124 {
3125         struct iwl_priv *priv = dev_get_drvdata(d);
3126         u32 size = sizeof(struct iwl_notif_statistics);
3127         u32 len = 0, ofs = 0;
3128         u8 *data = (u8 *)&priv->statistics;
3129         int rc = 0;
3130
3131         if (!iwl_is_alive(priv))
3132                 return -EAGAIN;
3133
3134         mutex_lock(&priv->mutex);
3135         rc = iwl_send_statistics_request(priv, CMD_SYNC, false);
3136         mutex_unlock(&priv->mutex);
3137
3138         if (rc) {
3139                 len = sprintf(buf,
3140                               "Error sending statistics request: 0x%08X\n", rc);
3141                 return len;
3142         }
3143
3144         while (size && (PAGE_SIZE - len)) {
3145                 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3146                                    PAGE_SIZE - len, 1);
3147                 len = strlen(buf);
3148                 if (PAGE_SIZE - len)
3149                         buf[len++] = '\n';
3150
3151                 ofs += 16;
3152                 size -= min(size, 16U);
3153         }
3154
3155         return len;
3156 }
3157
3158 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
3159
3160 static ssize_t show_rts_ht_protection(struct device *d,
3161                              struct device_attribute *attr, char *buf)
3162 {
3163         struct iwl_priv *priv = dev_get_drvdata(d);
3164
3165         return sprintf(buf, "%s\n",
3166                 priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
3167 }
3168
3169 static ssize_t store_rts_ht_protection(struct device *d,
3170                               struct device_attribute *attr,
3171                               const char *buf, size_t count)
3172 {
3173         struct iwl_priv *priv = dev_get_drvdata(d);
3174         unsigned long val;
3175         int ret;
3176
3177         ret = strict_strtoul(buf, 10, &val);
3178         if (ret)
3179                 IWL_INFO(priv, "Input is not in decimal form.\n");
3180         else {
3181                 if (!iwl_is_associated(priv))
3182                         priv->cfg->use_rts_for_ht = val ? true : false;
3183                 else
3184                         IWL_ERR(priv, "Sta associated with AP - "
3185                                 "Change protection mechanism is not allowed\n");
3186                 ret = count;
3187         }
3188         return ret;
3189 }
3190
3191 static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
3192                         show_rts_ht_protection, store_rts_ht_protection);
3193
3194
3195 /*****************************************************************************
3196  *
3197  * driver setup and teardown
3198  *
3199  *****************************************************************************/
3200
3201 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3202 {
3203         priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3204
3205         init_waitqueue_head(&priv->wait_command_queue);
3206
3207         INIT_WORK(&priv->restart, iwl_bg_restart);
3208         INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3209         INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3210         INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3211         INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3212         INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3213
3214         iwl_setup_scan_deferred_work(priv);
3215
3216         if (priv->cfg->ops->lib->setup_deferred_work)
3217                 priv->cfg->ops->lib->setup_deferred_work(priv);
3218
3219         init_timer(&priv->statistics_periodic);
3220         priv->statistics_periodic.data = (unsigned long)priv;
3221         priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3222
3223         init_timer(&priv->ucode_trace);
3224         priv->ucode_trace.data = (unsigned long)priv;
3225         priv->ucode_trace.function = iwl_bg_ucode_trace;
3226
3227         if (!priv->cfg->use_isr_legacy)
3228                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3229                         iwl_irq_tasklet, (unsigned long)priv);
3230         else
3231                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3232                         iwl_irq_tasklet_legacy, (unsigned long)priv);
3233 }
3234
3235 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3236 {
3237         if (priv->cfg->ops->lib->cancel_deferred_work)
3238                 priv->cfg->ops->lib->cancel_deferred_work(priv);
3239
3240         cancel_delayed_work_sync(&priv->init_alive_start);
3241         cancel_delayed_work(&priv->scan_check);
3242         cancel_delayed_work(&priv->alive_start);
3243         cancel_work_sync(&priv->beacon_update);
3244         del_timer_sync(&priv->statistics_periodic);
3245         del_timer_sync(&priv->ucode_trace);
3246 }
3247
3248 static void iwl_init_hw_rates(struct iwl_priv *priv,
3249                               struct ieee80211_rate *rates)
3250 {
3251         int i;
3252
3253         for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3254                 rates[i].bitrate = iwl_rates[i].ieee * 5;
3255                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3256                 rates[i].hw_value_short = i;
3257                 rates[i].flags = 0;
3258                 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3259                         /*
3260                          * If CCK != 1M then set short preamble rate flag.
3261                          */
3262                         rates[i].flags |=
3263                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3264                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
3265                 }
3266         }
3267 }
3268
3269 static int iwl_init_drv(struct iwl_priv *priv)
3270 {
3271         int ret;
3272
3273         priv->ibss_beacon = NULL;
3274
3275         spin_lock_init(&priv->sta_lock);
3276         spin_lock_init(&priv->hcmd_lock);
3277
3278         INIT_LIST_HEAD(&priv->free_frames);
3279
3280         mutex_init(&priv->mutex);
3281         mutex_init(&priv->sync_cmd_mutex);
3282
3283         priv->ieee_channels = NULL;
3284         priv->ieee_rates = NULL;
3285         priv->band = IEEE80211_BAND_2GHZ;
3286
3287         priv->iw_mode = NL80211_IFTYPE_STATION;
3288         priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3289         priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3290
3291         /* initialize force reset */
3292         priv->force_reset[IWL_RF_RESET].reset_duration =
3293                 IWL_DELAY_NEXT_FORCE_RF_RESET;
3294         priv->force_reset[IWL_FW_RESET].reset_duration =
3295                 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3296
3297         /* Choose which receivers/antennas to use */
3298         if (priv->cfg->ops->hcmd->set_rxon_chain)
3299                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3300
3301         iwl_init_scan_params(priv);
3302
3303         iwl_reset_qos(priv);
3304
3305         priv->qos_data.qos_active = 0;
3306         priv->qos_data.qos_cap.val = 0;
3307
3308         /* Set the tx_power_user_lmt to the lowest power level
3309          * this value will get overwritten by channel max power avg
3310          * from eeprom */
3311         priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
3312
3313         ret = iwl_init_channel_map(priv);
3314         if (ret) {
3315                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3316                 goto err;
3317         }
3318
3319         ret = iwlcore_init_geos(priv);
3320         if (ret) {
3321                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3322                 goto err_free_channel_map;
3323         }
3324         iwl_init_hw_rates(priv, priv->ieee_rates);
3325
3326         return 0;
3327
3328 err_free_channel_map:
3329         iwl_free_channel_map(priv);
3330 err:
3331         return ret;
3332 }
3333
3334 static void iwl_uninit_drv(struct iwl_priv *priv)
3335 {
3336         iwl_calib_free_results(priv);
3337         iwlcore_free_geos(priv);
3338         iwl_free_channel_map(priv);
3339         kfree(priv->scan);
3340 }
3341
3342 static struct attribute *iwl_sysfs_entries[] = {
3343         &dev_attr_statistics.attr,
3344         &dev_attr_temperature.attr,
3345         &dev_attr_tx_power.attr,
3346         &dev_attr_rts_ht_protection.attr,
3347 #ifdef CONFIG_IWLWIFI_DEBUG
3348         &dev_attr_debug_level.attr,
3349 #endif
3350         NULL
3351 };
3352
3353 static struct attribute_group iwl_attribute_group = {
3354         .name = NULL,           /* put in device directory */
3355         .attrs = iwl_sysfs_entries,
3356 };
3357
3358 static struct ieee80211_ops iwl_hw_ops = {
3359         .tx = iwl_mac_tx,
3360         .start = iwl_mac_start,
3361         .stop = iwl_mac_stop,
3362         .add_interface = iwl_mac_add_interface,
3363         .remove_interface = iwl_mac_remove_interface,
3364         .config = iwl_mac_config,
3365         .configure_filter = iwl_configure_filter,
3366         .set_key = iwl_mac_set_key,
3367         .update_tkip_key = iwl_mac_update_tkip_key,
3368         .get_stats = iwl_mac_get_stats,
3369         .conf_tx = iwl_mac_conf_tx,
3370         .reset_tsf = iwl_mac_reset_tsf,
3371         .bss_info_changed = iwl_bss_info_changed,
3372         .ampdu_action = iwl_mac_ampdu_action,
3373         .hw_scan = iwl_mac_hw_scan,
3374         .sta_notify = iwl_mac_sta_notify,
3375         .sta_add = iwlagn_mac_sta_add,
3376         .sta_remove = iwl_mac_sta_remove,
3377 };
3378
3379 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3380 {
3381         int err = 0;
3382         struct iwl_priv *priv;
3383         struct ieee80211_hw *hw;
3384         struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3385         unsigned long flags;
3386         u16 pci_cmd;
3387
3388         /************************
3389          * 1. Allocating HW data
3390          ************************/
3391
3392         /* Disabling hardware scan means that mac80211 will perform scans
3393          * "the hard way", rather than using device's scan. */
3394         if (cfg->mod_params->disable_hw_scan) {
3395                 if (iwl_debug_level & IWL_DL_INFO)
3396                         dev_printk(KERN_DEBUG, &(pdev->dev),
3397                                    "Disabling hw_scan\n");
3398                 iwl_hw_ops.hw_scan = NULL;
3399         }
3400
3401         hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3402         if (!hw) {
3403                 err = -ENOMEM;
3404                 goto out;
3405         }
3406         priv = hw->priv;
3407         /* At this point both hw and priv are allocated. */
3408
3409         SET_IEEE80211_DEV(hw, &pdev->dev);
3410
3411         IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3412         priv->cfg = cfg;
3413         priv->pci_dev = pdev;
3414         priv->inta_mask = CSR_INI_SET_MASK;
3415
3416 #ifdef CONFIG_IWLWIFI_DEBUG
3417         atomic_set(&priv->restrict_refcnt, 0);
3418 #endif
3419         if (iwl_alloc_traffic_mem(priv))
3420                 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3421
3422         /**************************
3423          * 2. Initializing PCI bus
3424          **************************/
3425         if (pci_enable_device(pdev)) {
3426                 err = -ENODEV;
3427                 goto out_ieee80211_free_hw;
3428         }
3429
3430         pci_set_master(pdev);
3431
3432         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3433         if (!err)
3434                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3435         if (err) {
3436                 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3437                 if (!err)
3438                         err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3439                 /* both attempts failed: */
3440                 if (err) {
3441                         IWL_WARN(priv, "No suitable DMA available.\n");
3442                         goto out_pci_disable_device;
3443                 }
3444         }
3445
3446         err = pci_request_regions(pdev, DRV_NAME);
3447         if (err)
3448                 goto out_pci_disable_device;
3449
3450         pci_set_drvdata(pdev, priv);
3451
3452
3453         /***********************
3454          * 3. Read REV register
3455          ***********************/
3456         priv->hw_base = pci_iomap(pdev, 0, 0);
3457         if (!priv->hw_base) {
3458                 err = -ENODEV;
3459                 goto out_pci_release_regions;
3460         }
3461
3462         IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
3463                 (unsigned long long) pci_resource_len(pdev, 0));
3464         IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
3465
3466         /* these spin locks will be used in apm_ops.init and EEPROM access
3467          * we should init now
3468          */
3469         spin_lock_init(&priv->reg_lock);
3470         spin_lock_init(&priv->lock);
3471
3472         /*
3473          * stop and reset the on-board processor just in case it is in a
3474          * strange state ... like being left stranded by a primary kernel
3475          * and this is now the kdump kernel trying to start up
3476          */
3477         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3478
3479         iwl_hw_detect(priv);
3480         IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3481                 priv->cfg->name, priv->hw_rev);
3482
3483         /* We disable the RETRY_TIMEOUT register (0x41) to keep
3484          * PCI Tx retries from interfering with C3 CPU state */
3485         pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
3486
3487         iwl_prepare_card_hw(priv);
3488         if (!priv->hw_ready) {
3489                 IWL_WARN(priv, "Failed, HW not ready\n");
3490                 goto out_iounmap;
3491         }
3492
3493         /*****************
3494          * 4. Read EEPROM
3495          *****************/
3496         /* Read the EEPROM */
3497         err = iwl_eeprom_init(priv);
3498         if (err) {
3499                 IWL_ERR(priv, "Unable to init EEPROM\n");
3500                 goto out_iounmap;
3501         }
3502         err = iwl_eeprom_check_version(priv);
3503         if (err)
3504                 goto out_free_eeprom;
3505
3506         /* extract MAC Address */
3507         iwl_eeprom_get_mac(priv, priv->mac_addr);
3508         IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
3509         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
3510
3511         /************************
3512          * 5. Setup HW constants
3513          ************************/
3514         if (iwl_set_hw_params(priv)) {
3515                 IWL_ERR(priv, "failed to set hw parameters\n");
3516                 goto out_free_eeprom;
3517         }
3518
3519         /*******************
3520          * 6. Setup priv
3521          *******************/
3522
3523         err = iwl_init_drv(priv);
3524         if (err)
3525                 goto out_free_eeprom;
3526         /* At this point both hw and priv are initialized. */
3527
3528         /********************
3529          * 7. Setup services
3530          ********************/
3531         spin_lock_irqsave(&priv->lock, flags);
3532         iwl_disable_interrupts(priv);
3533         spin_unlock_irqrestore(&priv->lock, flags);
3534
3535         pci_enable_msi(priv->pci_dev);
3536
3537         iwl_alloc_isr_ict(priv);
3538         err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
3539                           IRQF_SHARED, DRV_NAME, priv);
3540         if (err) {
3541                 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
3542                 goto out_disable_msi;
3543         }
3544         err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
3545         if (err) {
3546                 IWL_ERR(priv, "failed to create sysfs device attributes\n");
3547                 goto out_free_irq;
3548         }
3549
3550         iwl_setup_deferred_work(priv);
3551         iwl_setup_rx_handlers(priv);
3552
3553         /*********************************************
3554          * 8. Enable interrupts and read RFKILL state
3555          *********************************************/
3556
3557         /* enable interrupts if needed: hw bug w/a */
3558         pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
3559         if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
3560                 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
3561                 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
3562         }
3563
3564         iwl_enable_interrupts(priv);
3565
3566         /* If platform's RF_KILL switch is NOT set to KILL */
3567         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3568                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3569         else
3570                 set_bit(STATUS_RF_KILL_HW, &priv->status);
3571
3572         wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3573                 test_bit(STATUS_RF_KILL_HW, &priv->status));
3574
3575         iwl_power_initialize(priv);
3576         iwl_tt_initialize(priv);
3577
3578         err = iwl_request_firmware(priv, true);
3579         if (err)
3580                 goto out_remove_sysfs;
3581
3582         return 0;
3583
3584  out_remove_sysfs:
3585         destroy_workqueue(priv->workqueue);
3586         priv->workqueue = NULL;
3587         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3588  out_free_irq:
3589         free_irq(priv->pci_dev->irq, priv);
3590         iwl_free_isr_ict(priv);
3591  out_disable_msi:
3592         pci_disable_msi(priv->pci_dev);
3593         iwl_uninit_drv(priv);
3594  out_free_eeprom:
3595         iwl_eeprom_free(priv);
3596  out_iounmap:
3597         pci_iounmap(pdev, priv->hw_base);
3598  out_pci_release_regions:
3599         pci_set_drvdata(pdev, NULL);
3600         pci_release_regions(pdev);
3601  out_pci_disable_device:
3602         pci_disable_device(pdev);
3603  out_ieee80211_free_hw:
3604         iwl_free_traffic_mem(priv);
3605         ieee80211_free_hw(priv->hw);
3606  out:
3607         return err;
3608 }
3609
3610 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
3611 {
3612         struct iwl_priv *priv = pci_get_drvdata(pdev);
3613         unsigned long flags;
3614
3615         if (!priv)
3616                 return;
3617
3618         IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3619
3620         iwl_dbgfs_unregister(priv);
3621         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3622
3623         /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3624          * to be called and iwl_down since we are removing the device
3625          * we need to set STATUS_EXIT_PENDING bit.
3626          */
3627         set_bit(STATUS_EXIT_PENDING, &priv->status);
3628         if (priv->mac80211_registered) {
3629                 ieee80211_unregister_hw(priv->hw);
3630                 priv->mac80211_registered = 0;
3631         } else {
3632                 iwl_down(priv);
3633         }
3634
3635         /*
3636          * Make sure device is reset to low power before unloading driver.
3637          * This may be redundant with iwl_down(), but there are paths to
3638          * run iwl_down() without calling apm_ops.stop(), and there are
3639          * paths to avoid running iwl_down() at all before leaving driver.
3640          * This (inexpensive) call *makes sure* device is reset.
3641          */
3642         priv->cfg->ops->lib->apm_ops.stop(priv);
3643
3644         iwl_tt_exit(priv);
3645
3646         /* make sure we flush any pending irq or
3647          * tasklet for the driver
3648          */
3649         spin_lock_irqsave(&priv->lock, flags);
3650         iwl_disable_interrupts(priv);
3651         spin_unlock_irqrestore(&priv->lock, flags);
3652
3653         iwl_synchronize_irq(priv);
3654
3655         iwl_dealloc_ucode_pci(priv);
3656
3657         if (priv->rxq.bd)
3658                 iwl_rx_queue_free(priv, &priv->rxq);
3659         iwl_hw_txq_ctx_free(priv);
3660
3661         iwl_eeprom_free(priv);
3662
3663
3664         /*netif_stop_queue(dev); */
3665         flush_workqueue(priv->workqueue);
3666
3667         /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3668          * priv->workqueue... so we can't take down the workqueue
3669          * until now... */
3670         destroy_workqueue(priv->workqueue);
3671         priv->workqueue = NULL;
3672         iwl_free_traffic_mem(priv);
3673
3674         free_irq(priv->pci_dev->irq, priv);
3675         pci_disable_msi(priv->pci_dev);
3676         pci_iounmap(pdev, priv->hw_base);
3677         pci_release_regions(pdev);
3678         pci_disable_device(pdev);
3679         pci_set_drvdata(pdev, NULL);
3680
3681         iwl_uninit_drv(priv);
3682
3683         iwl_free_isr_ict(priv);
3684
3685         if (priv->ibss_beacon)
3686                 dev_kfree_skb(priv->ibss_beacon);
3687
3688         ieee80211_free_hw(priv->hw);
3689 }
3690
3691
3692 /*****************************************************************************
3693  *
3694  * driver and module entry point
3695  *
3696  *****************************************************************************/
3697
3698 /* Hardware specific file defines the PCI IDs table for that hardware module */
3699 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
3700 #ifdef CONFIG_IWL4965
3701         {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
3702         {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
3703 #endif /* CONFIG_IWL4965 */
3704 #ifdef CONFIG_IWL5000
3705 /* 5100 Series WiFi */
3706         {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
3707         {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
3708         {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
3709         {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
3710         {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
3711         {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
3712         {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
3713         {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
3714         {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
3715         {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
3716         {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
3717         {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
3718         {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
3719         {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
3720         {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
3721         {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
3722         {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
3723         {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
3724         {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
3725         {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
3726         {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
3727         {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
3728         {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
3729         {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
3730
3731 /* 5300 Series WiFi */
3732         {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
3733         {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
3734         {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
3735         {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
3736         {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
3737         {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
3738         {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
3739         {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
3740         {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
3741         {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
3742         {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
3743         {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
3744
3745 /* 5350 Series WiFi/WiMax */
3746         {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
3747         {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
3748         {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
3749
3750 /* 5150 Series Wifi/WiMax */
3751         {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
3752         {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
3753         {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
3754         {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
3755         {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
3756         {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
3757
3758         {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
3759         {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
3760         {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
3761         {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
3762
3763 /* 6x00 Series */
3764         {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
3765         {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
3766         {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
3767         {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
3768         {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
3769         {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
3770         {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
3771         {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
3772         {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
3773         {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
3774
3775 /* 6x50 WiFi/WiMax Series */
3776         {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
3777         {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
3778         {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
3779         {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
3780         {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
3781         {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
3782
3783 /* 1000 Series WiFi */
3784         {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
3785         {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
3786         {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
3787         {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
3788         {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
3789         {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
3790         {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
3791         {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
3792         {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
3793         {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
3794         {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
3795         {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
3796 #endif /* CONFIG_IWL5000 */
3797
3798         {0}
3799 };
3800 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
3801
3802 static struct pci_driver iwl_driver = {
3803         .name = DRV_NAME,
3804         .id_table = iwl_hw_card_ids,
3805         .probe = iwl_pci_probe,
3806         .remove = __devexit_p(iwl_pci_remove),
3807 #ifdef CONFIG_PM
3808         .suspend = iwl_pci_suspend,
3809         .resume = iwl_pci_resume,
3810 #endif
3811 };
3812
3813 static int __init iwl_init(void)
3814 {
3815
3816         int ret;
3817         printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
3818         printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
3819
3820         ret = iwlagn_rate_control_register();
3821         if (ret) {
3822                 printk(KERN_ERR DRV_NAME
3823                        "Unable to register rate control algorithm: %d\n", ret);
3824                 return ret;
3825         }
3826
3827         ret = pci_register_driver(&iwl_driver);
3828         if (ret) {
3829                 printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
3830                 goto error_register;
3831         }
3832
3833         return ret;
3834
3835 error_register:
3836         iwlagn_rate_control_unregister();
3837         return ret;
3838 }
3839
3840 static void __exit iwl_exit(void)
3841 {
3842         pci_unregister_driver(&iwl_driver);
3843         iwlagn_rate_control_unregister();
3844 }
3845
3846 module_exit(iwl_exit);
3847 module_init(iwl_init);
3848
3849 #ifdef CONFIG_IWLWIFI_DEBUG
3850 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
3851 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
3852 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3853 MODULE_PARM_DESC(debug, "debug output mask");
3854 #endif
3855