iwl3945: Have consistant and not redefined HW constants
[safe/jmp/linux-2.6] / drivers / net / wireless / iwlwifi / iwl-3945.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <linux/firmware.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
39 #include <net/mac80211.h>
40
41 #include "iwl-3945-core.h"
42 #include "iwl-3945-fh.h"
43 #include "iwl-commands.h"
44 #include "iwl-3945.h"
45 #include "iwl-helpers.h"
46 #include "iwl-3945-rs.h"
47
48 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
49         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
50                                     IWL_RATE_##r##M_IEEE,   \
51                                     IWL_RATE_##ip##M_INDEX, \
52                                     IWL_RATE_##in##M_INDEX, \
53                                     IWL_RATE_##rp##M_INDEX, \
54                                     IWL_RATE_##rn##M_INDEX, \
55                                     IWL_RATE_##pp##M_INDEX, \
56                                     IWL_RATE_##np##M_INDEX, \
57                                     IWL_RATE_##r##M_INDEX_TABLE, \
58                                     IWL_RATE_##ip##M_INDEX_TABLE }
59
60 /*
61  * Parameter order:
62  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
63  *
64  * If there isn't a valid next or previous rate then INV is used which
65  * maps to IWL_RATE_INVALID
66  *
67  */
68 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT] = {
69         IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
70         IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
71         IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
72         IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
73         IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
74         IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
75         IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
76         IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
77         IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
78         IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
79         IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
80         IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
81 };
82
83 /* 1 = enable the iwl3945_disable_events() function */
84 #define IWL_EVT_DISABLE (0)
85 #define IWL_EVT_DISABLE_SIZE (1532/32)
86
87 /**
88  * iwl3945_disable_events - Disable selected events in uCode event log
89  *
90  * Disable an event by writing "1"s into "disable"
91  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
92  *   Default values of 0 enable uCode events to be logged.
93  * Use for only special debugging.  This function is just a placeholder as-is,
94  *   you'll need to provide the special bits! ...
95  *   ... and set IWL_EVT_DISABLE to 1. */
96 void iwl3945_disable_events(struct iwl3945_priv *priv)
97 {
98         int ret;
99         int i;
100         u32 base;               /* SRAM address of event log header */
101         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
102         u32 array_size;         /* # of u32 entries in array */
103         u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
104                 0x00000000,     /*   31 -    0  Event id numbers */
105                 0x00000000,     /*   63 -   32 */
106                 0x00000000,     /*   95 -   64 */
107                 0x00000000,     /*  127 -   96 */
108                 0x00000000,     /*  159 -  128 */
109                 0x00000000,     /*  191 -  160 */
110                 0x00000000,     /*  223 -  192 */
111                 0x00000000,     /*  255 -  224 */
112                 0x00000000,     /*  287 -  256 */
113                 0x00000000,     /*  319 -  288 */
114                 0x00000000,     /*  351 -  320 */
115                 0x00000000,     /*  383 -  352 */
116                 0x00000000,     /*  415 -  384 */
117                 0x00000000,     /*  447 -  416 */
118                 0x00000000,     /*  479 -  448 */
119                 0x00000000,     /*  511 -  480 */
120                 0x00000000,     /*  543 -  512 */
121                 0x00000000,     /*  575 -  544 */
122                 0x00000000,     /*  607 -  576 */
123                 0x00000000,     /*  639 -  608 */
124                 0x00000000,     /*  671 -  640 */
125                 0x00000000,     /*  703 -  672 */
126                 0x00000000,     /*  735 -  704 */
127                 0x00000000,     /*  767 -  736 */
128                 0x00000000,     /*  799 -  768 */
129                 0x00000000,     /*  831 -  800 */
130                 0x00000000,     /*  863 -  832 */
131                 0x00000000,     /*  895 -  864 */
132                 0x00000000,     /*  927 -  896 */
133                 0x00000000,     /*  959 -  928 */
134                 0x00000000,     /*  991 -  960 */
135                 0x00000000,     /* 1023 -  992 */
136                 0x00000000,     /* 1055 - 1024 */
137                 0x00000000,     /* 1087 - 1056 */
138                 0x00000000,     /* 1119 - 1088 */
139                 0x00000000,     /* 1151 - 1120 */
140                 0x00000000,     /* 1183 - 1152 */
141                 0x00000000,     /* 1215 - 1184 */
142                 0x00000000,     /* 1247 - 1216 */
143                 0x00000000,     /* 1279 - 1248 */
144                 0x00000000,     /* 1311 - 1280 */
145                 0x00000000,     /* 1343 - 1312 */
146                 0x00000000,     /* 1375 - 1344 */
147                 0x00000000,     /* 1407 - 1376 */
148                 0x00000000,     /* 1439 - 1408 */
149                 0x00000000,     /* 1471 - 1440 */
150                 0x00000000,     /* 1503 - 1472 */
151         };
152
153         base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
154         if (!iwl3945_hw_valid_rtc_data_addr(base)) {
155                 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
156                 return;
157         }
158
159         ret = iwl3945_grab_nic_access(priv);
160         if (ret) {
161                 IWL_WARNING("Can not read from adapter at this time.\n");
162                 return;
163         }
164
165         disable_ptr = iwl3945_read_targ_mem(priv, base + (4 * sizeof(u32)));
166         array_size = iwl3945_read_targ_mem(priv, base + (5 * sizeof(u32)));
167         iwl3945_release_nic_access(priv);
168
169         if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
170                 IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
171                                disable_ptr);
172                 ret = iwl3945_grab_nic_access(priv);
173                 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
174                         iwl3945_write_targ_mem(priv,
175                                            disable_ptr + (i * sizeof(u32)),
176                                            evt_disable[i]);
177
178                 iwl3945_release_nic_access(priv);
179         } else {
180                 IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
181                 IWL_DEBUG_INFO("  by writing \"1\"s into disable bitmap\n");
182                 IWL_DEBUG_INFO("  in SRAM at 0x%x, size %d u32s\n",
183                                disable_ptr, array_size);
184         }
185
186 }
187
188 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
189 {
190         int idx;
191
192         for (idx = 0; idx < IWL_RATE_COUNT; idx++)
193                 if (iwl3945_rates[idx].plcp == plcp)
194                         return idx;
195         return -1;
196 }
197
198 /**
199  * iwl3945_get_antenna_flags - Get antenna flags for RXON command
200  * @priv: eeprom and antenna fields are used to determine antenna flags
201  *
202  * priv->eeprom  is used to determine if antenna AUX/MAIN are reversed
203  * priv->antenna specifies the antenna diversity mode:
204  *
205  * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
206  * IWL_ANTENNA_MAIN      - Force MAIN antenna
207  * IWL_ANTENNA_AUX       - Force AUX antenna
208  */
209 __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv)
210 {
211         switch (priv->antenna) {
212         case IWL_ANTENNA_DIVERSITY:
213                 return 0;
214
215         case IWL_ANTENNA_MAIN:
216                 if (priv->eeprom.antenna_switch_type)
217                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
218                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
219
220         case IWL_ANTENNA_AUX:
221                 if (priv->eeprom.antenna_switch_type)
222                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
223                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
224         }
225
226         /* bad antenna selector value */
227         IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna);
228         return 0;               /* "diversity" is default if error */
229 }
230
231 #ifdef CONFIG_IWL3945_DEBUG
232 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
233
234 static const char *iwl3945_get_tx_fail_reason(u32 status)
235 {
236         switch (status & TX_STATUS_MSK) {
237         case TX_STATUS_SUCCESS:
238                 return "SUCCESS";
239                 TX_STATUS_ENTRY(SHORT_LIMIT);
240                 TX_STATUS_ENTRY(LONG_LIMIT);
241                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
242                 TX_STATUS_ENTRY(MGMNT_ABORT);
243                 TX_STATUS_ENTRY(NEXT_FRAG);
244                 TX_STATUS_ENTRY(LIFE_EXPIRE);
245                 TX_STATUS_ENTRY(DEST_PS);
246                 TX_STATUS_ENTRY(ABORTED);
247                 TX_STATUS_ENTRY(BT_RETRY);
248                 TX_STATUS_ENTRY(STA_INVALID);
249                 TX_STATUS_ENTRY(FRAG_DROPPED);
250                 TX_STATUS_ENTRY(TID_DISABLE);
251                 TX_STATUS_ENTRY(FRAME_FLUSHED);
252                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
253                 TX_STATUS_ENTRY(TX_LOCKED);
254                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
255         }
256
257         return "UNKNOWN";
258 }
259 #else
260 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
261 {
262         return "";
263 }
264 #endif
265
266 /*
267  * get ieee prev rate from rate scale table.
268  * for A and B mode we need to overright prev
269  * value
270  */
271 int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate)
272 {
273         int next_rate = iwl3945_get_prev_ieee_rate(rate);
274
275         switch (priv->band) {
276         case IEEE80211_BAND_5GHZ:
277                 if (rate == IWL_RATE_12M_INDEX)
278                         next_rate = IWL_RATE_9M_INDEX;
279                 else if (rate == IWL_RATE_6M_INDEX)
280                         next_rate = IWL_RATE_6M_INDEX;
281                 break;
282         case IEEE80211_BAND_2GHZ:
283                 if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
284                     iwl3945_is_associated(priv)) {
285                         if (rate == IWL_RATE_11M_INDEX)
286                                 next_rate = IWL_RATE_5M_INDEX;
287                 }
288                 break;
289
290         default:
291                 break;
292         }
293
294         return next_rate;
295 }
296
297
298 /**
299  * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
300  *
301  * When FW advances 'R' index, all entries between old and new 'R' index
302  * need to be reclaimed. As result, some free space forms. If there is
303  * enough free space (> low mark), wake the stack that feeds us.
304  */
305 static void iwl3945_tx_queue_reclaim(struct iwl3945_priv *priv,
306                                      int txq_id, int index)
307 {
308         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
309         struct iwl3945_queue *q = &txq->q;
310         struct iwl3945_tx_info *tx_info;
311
312         BUG_ON(txq_id == IWL_CMD_QUEUE_NUM);
313
314         for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
315                 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
316
317                 tx_info = &txq->txb[txq->q.read_ptr];
318                 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
319                 tx_info->skb[0] = NULL;
320                 iwl3945_hw_txq_free_tfd(priv, txq);
321         }
322
323         if (iwl3945_queue_space(q) > q->low_mark && (txq_id >= 0) &&
324                         (txq_id != IWL_CMD_QUEUE_NUM) &&
325                         priv->mac80211_registered)
326                 ieee80211_wake_queue(priv->hw, txq_id);
327 }
328
329 /**
330  * iwl3945_rx_reply_tx - Handle Tx response
331  */
332 static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv,
333                             struct iwl3945_rx_mem_buffer *rxb)
334 {
335         struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
336         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
337         int txq_id = SEQ_TO_QUEUE(sequence);
338         int index = SEQ_TO_INDEX(sequence);
339         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
340         struct ieee80211_tx_info *info;
341         struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
342         u32  status = le32_to_cpu(tx_resp->status);
343         int rate_idx;
344         int fail;
345
346         if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) {
347                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
348                           "is out of range [0-%d] %d %d\n", txq_id,
349                           index, txq->q.n_bd, txq->q.write_ptr,
350                           txq->q.read_ptr);
351                 return;
352         }
353
354         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
355         ieee80211_tx_info_clear_status(info);
356
357         /* Fill the MRR chain with some info about on-chip retransmissions */
358         rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
359         if (info->band == IEEE80211_BAND_5GHZ)
360                 rate_idx -= IWL_FIRST_OFDM_RATE;
361
362         fail = tx_resp->failure_frame;
363
364         info->status.rates[0].idx = rate_idx;
365         info->status.rates[0].count = fail + 1; /* add final attempt */
366
367         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
368         info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
369                                 IEEE80211_TX_STAT_ACK : 0;
370
371         IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
372                         txq_id, iwl3945_get_tx_fail_reason(status), status,
373                         tx_resp->rate, tx_resp->failure_frame);
374
375         IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
376         iwl3945_tx_queue_reclaim(priv, txq_id, index);
377
378         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
379                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
380 }
381
382
383
384 /*****************************************************************************
385  *
386  * Intel PRO/Wireless 3945ABG/BG Network Connection
387  *
388  *  RX handler implementations
389  *
390  *****************************************************************************/
391
392 void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
393 {
394         struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
395         IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
396                      (int)sizeof(struct iwl3945_notif_statistics),
397                      le32_to_cpu(pkt->len));
398
399         memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics));
400
401         iwl3945_led_background(priv);
402
403         priv->last_statistics_time = jiffies;
404 }
405
406 /******************************************************************************
407  *
408  * Misc. internal state and helper functions
409  *
410  ******************************************************************************/
411 #ifdef CONFIG_IWL3945_DEBUG
412
413 /**
414  * iwl3945_report_frame - dump frame to syslog during debug sessions
415  *
416  * You may hack this function to show different aspects of received frames,
417  * including selective frame dumps.
418  * group100 parameter selects whether to show 1 out of 100 good frames.
419  */
420 static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
421                       struct iwl_rx_packet *pkt,
422                       struct ieee80211_hdr *header, int group100)
423 {
424         u32 to_us;
425         u32 print_summary = 0;
426         u32 print_dump = 0;     /* set to 1 to dump all frames' contents */
427         u32 hundred = 0;
428         u32 dataframe = 0;
429         __le16 fc;
430         u16 seq_ctl;
431         u16 channel;
432         u16 phy_flags;
433         u16 length;
434         u16 status;
435         u16 bcn_tmr;
436         u32 tsf_low;
437         u64 tsf;
438         u8 rssi;
439         u8 agc;
440         u16 sig_avg;
441         u16 noise_diff;
442         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
443         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
444         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
445         u8 *data = IWL_RX_DATA(pkt);
446
447         /* MAC header */
448         fc = header->frame_control;
449         seq_ctl = le16_to_cpu(header->seq_ctrl);
450
451         /* metadata */
452         channel = le16_to_cpu(rx_hdr->channel);
453         phy_flags = le16_to_cpu(rx_hdr->phy_flags);
454         length = le16_to_cpu(rx_hdr->len);
455
456         /* end-of-frame status and timestamp */
457         status = le32_to_cpu(rx_end->status);
458         bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
459         tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
460         tsf = le64_to_cpu(rx_end->timestamp);
461
462         /* signal statistics */
463         rssi = rx_stats->rssi;
464         agc = rx_stats->agc;
465         sig_avg = le16_to_cpu(rx_stats->sig_avg);
466         noise_diff = le16_to_cpu(rx_stats->noise_diff);
467
468         to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
469
470         /* if data frame is to us and all is good,
471          *   (optionally) print summary for only 1 out of every 100 */
472         if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
473             cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
474                 dataframe = 1;
475                 if (!group100)
476                         print_summary = 1;      /* print each frame */
477                 else if (priv->framecnt_to_us < 100) {
478                         priv->framecnt_to_us++;
479                         print_summary = 0;
480                 } else {
481                         priv->framecnt_to_us = 0;
482                         print_summary = 1;
483                         hundred = 1;
484                 }
485         } else {
486                 /* print summary for all other frames */
487                 print_summary = 1;
488         }
489
490         if (print_summary) {
491                 char *title;
492                 int rate;
493
494                 if (hundred)
495                         title = "100Frames";
496                 else if (ieee80211_has_retry(fc))
497                         title = "Retry";
498                 else if (ieee80211_is_assoc_resp(fc))
499                         title = "AscRsp";
500                 else if (ieee80211_is_reassoc_resp(fc))
501                         title = "RasRsp";
502                 else if (ieee80211_is_probe_resp(fc)) {
503                         title = "PrbRsp";
504                         print_dump = 1; /* dump frame contents */
505                 } else if (ieee80211_is_beacon(fc)) {
506                         title = "Beacon";
507                         print_dump = 1; /* dump frame contents */
508                 } else if (ieee80211_is_atim(fc))
509                         title = "ATIM";
510                 else if (ieee80211_is_auth(fc))
511                         title = "Auth";
512                 else if (ieee80211_is_deauth(fc))
513                         title = "DeAuth";
514                 else if (ieee80211_is_disassoc(fc))
515                         title = "DisAssoc";
516                 else
517                         title = "Frame";
518
519                 rate = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
520                 if (rate == -1)
521                         rate = 0;
522                 else
523                         rate = iwl3945_rates[rate].ieee / 2;
524
525                 /* print frame summary.
526                  * MAC addresses show just the last byte (for brevity),
527                  *    but you can hack it to show more, if you'd like to. */
528                 if (dataframe)
529                         IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
530                                      "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
531                                      title, le16_to_cpu(fc), header->addr1[5],
532                                      length, rssi, channel, rate);
533                 else {
534                         /* src/dst addresses assume managed mode */
535                         IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
536                                      "src=0x%02x, rssi=%u, tim=%lu usec, "
537                                      "phy=0x%02x, chnl=%d\n",
538                                      title, le16_to_cpu(fc), header->addr1[5],
539                                      header->addr3[5], rssi,
540                                      tsf_low - priv->scan_start_tsf,
541                                      phy_flags, channel);
542                 }
543         }
544         if (print_dump)
545                 iwl_print_hex_dump(priv, IWL_DL_RX, data, length);
546 }
547 #else
548 static inline void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
549                       struct iwl_rx_packet *pkt,
550                       struct ieee80211_hdr *header, int group100)
551 {
552 }
553 #endif
554
555 /* This is necessary only for a number of statistics, see the caller. */
556 static int iwl3945_is_network_packet(struct iwl3945_priv *priv,
557                 struct ieee80211_hdr *header)
558 {
559         /* Filter incoming packets to determine if they are targeted toward
560          * this network, discarding packets coming from ourselves */
561         switch (priv->iw_mode) {
562         case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
563                 /* packets to our IBSS update information */
564                 return !compare_ether_addr(header->addr3, priv->bssid);
565         case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
566                 /* packets to our IBSS update information */
567                 return !compare_ether_addr(header->addr2, priv->bssid);
568         default:
569                 return 1;
570         }
571 }
572
573 static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
574                                    struct iwl3945_rx_mem_buffer *rxb,
575                                    struct ieee80211_rx_status *stats)
576 {
577         struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
578 #ifdef CONFIG_IWL3945_LEDS
579         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
580 #endif
581         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
582         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
583         short len = le16_to_cpu(rx_hdr->len);
584
585         /* We received data from the HW, so stop the watchdog */
586         if (unlikely((len + IWL39_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
587                 IWL_DEBUG_DROP("Corruption detected!\n");
588                 return;
589         }
590
591         /* We only process data packets if the interface is open */
592         if (unlikely(!priv->is_open)) {
593                 IWL_DEBUG_DROP_LIMIT
594                     ("Dropping packet while interface is not open.\n");
595                 return;
596         }
597
598         skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
599         /* Set the size of the skb to the size of the frame */
600         skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
601
602         if (iwl3945_param_hwcrypto)
603                 iwl3945_set_decrypted_flag(priv, rxb->skb,
604                                        le32_to_cpu(rx_end->status), stats);
605
606 #ifdef CONFIG_IWL3945_LEDS
607         if (ieee80211_is_data(hdr->frame_control))
608                 priv->rxtxpackets += len;
609 #endif
610         ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
611         rxb->skb = NULL;
612 }
613
614 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
615
616 static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
617                                 struct iwl3945_rx_mem_buffer *rxb)
618 {
619         struct ieee80211_hdr *header;
620         struct ieee80211_rx_status rx_status;
621         struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
622         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
623         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
624         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
625         int snr;
626         u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg);
627         u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
628         u8 network_packet;
629
630         rx_status.flag = 0;
631         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
632         rx_status.freq =
633                 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel));
634         rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
635                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
636
637         rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
638         if (rx_status.band == IEEE80211_BAND_5GHZ)
639                 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
640
641         rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
642                                         RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
643
644         /* set the preamble flag if appropriate */
645         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
646                 rx_status.flag |= RX_FLAG_SHORTPRE;
647
648         if ((unlikely(rx_stats->phy_count > 20))) {
649                 IWL_DEBUG_DROP
650                     ("dsp size out of range [0,20]: "
651                      "%d/n", rx_stats->phy_count);
652                 return;
653         }
654
655         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
656             || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
657                 IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
658                 return;
659         }
660
661
662
663         /* Convert 3945's rssi indicator to dBm */
664         rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
665
666         /* Set default noise value to -127 */
667         if (priv->last_rx_noise == 0)
668                 priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
669
670         /* 3945 provides noise info for OFDM frames only.
671          * sig_avg and noise_diff are measured by the 3945's digital signal
672          *   processor (DSP), and indicate linear levels of signal level and
673          *   distortion/noise within the packet preamble after
674          *   automatic gain control (AGC).  sig_avg should stay fairly
675          *   constant if the radio's AGC is working well.
676          * Since these values are linear (not dB or dBm), linear
677          *   signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
678          * Convert linear SNR to dB SNR, then subtract that from rssi dBm
679          *   to obtain noise level in dBm.
680          * Calculate rx_status.signal (quality indicator in %) based on SNR. */
681         if (rx_stats_noise_diff) {
682                 snr = rx_stats_sig_avg / rx_stats_noise_diff;
683                 rx_status.noise = rx_status.signal -
684                                         iwl3945_calc_db_from_ratio(snr);
685                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
686                                                          rx_status.noise);
687
688         /* If noise info not available, calculate signal quality indicator (%)
689          *   using just the dBm signal level. */
690         } else {
691                 rx_status.noise = priv->last_rx_noise;
692                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
693         }
694
695
696         IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
697                         rx_status.signal, rx_status.noise, rx_status.qual,
698                         rx_stats_sig_avg, rx_stats_noise_diff);
699
700         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
701
702         network_packet = iwl3945_is_network_packet(priv, header);
703
704         IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
705                               network_packet ? '*' : ' ',
706                               le16_to_cpu(rx_hdr->channel),
707                               rx_status.signal, rx_status.signal,
708                               rx_status.noise, rx_status.rate_idx);
709
710 #ifdef CONFIG_IWL3945_DEBUG
711         if (priv->debug_level & (IWL_DL_RX))
712                 /* Set "1" to report good data frames in groups of 100 */
713                 iwl3945_dbg_report_frame(priv, pkt, header, 1);
714 #endif
715
716         if (network_packet) {
717                 priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
718                 priv->last_tsf = le64_to_cpu(rx_end->timestamp);
719                 priv->last_rx_rssi = rx_status.signal;
720                 priv->last_rx_noise = rx_status.noise;
721         }
722
723         iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
724 }
725
726 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr,
727                                  dma_addr_t addr, u16 len)
728 {
729         int count;
730         u32 pad;
731         struct iwl3945_tfd_frame *tfd = (struct iwl3945_tfd_frame *)ptr;
732
733         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
734         pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags));
735
736         if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
737                 IWL_ERROR("Error can not send more than %d chunks\n",
738                           NUM_TFD_CHUNKS);
739                 return -EINVAL;
740         }
741
742         tfd->pa[count].addr = cpu_to_le32(addr);
743         tfd->pa[count].len = cpu_to_le32(len);
744
745         count++;
746
747         tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
748                                          TFD_CTL_PAD_SET(pad));
749
750         return 0;
751 }
752
753 /**
754  * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
755  *
756  * Does NOT advance any indexes
757  */
758 int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
759 {
760         struct iwl3945_tfd_frame *bd_tmp = (struct iwl3945_tfd_frame *)&txq->bd[0];
761         struct iwl3945_tfd_frame *bd = &bd_tmp[txq->q.read_ptr];
762         struct pci_dev *dev = priv->pci_dev;
763         int i;
764         int counter;
765
766         /* classify bd */
767         if (txq->q.id == IWL_CMD_QUEUE_NUM)
768                 /* nothing to cleanup after for host commands */
769                 return 0;
770
771         /* sanity check */
772         counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags));
773         if (counter > NUM_TFD_CHUNKS) {
774                 IWL_ERROR("Too many chunks: %i\n", counter);
775                 /* @todo issue fatal error, it is quite serious situation */
776                 return 0;
777         }
778
779         /* unmap chunks if any */
780
781         for (i = 1; i < counter; i++) {
782                 pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr),
783                                  le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE);
784                 if (txq->txb[txq->q.read_ptr].skb[0]) {
785                         struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0];
786                         if (txq->txb[txq->q.read_ptr].skb[0]) {
787                                 /* Can be called from interrupt context */
788                                 dev_kfree_skb_any(skb);
789                                 txq->txb[txq->q.read_ptr].skb[0] = NULL;
790                         }
791                 }
792         }
793         return 0;
794 }
795
796 u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *addr)
797 {
798         int i, start = IWL_AP_ID;
799         int ret = IWL_INVALID_STATION;
800         unsigned long flags;
801
802         if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
803             (priv->iw_mode == NL80211_IFTYPE_AP))
804                 start = IWL_STA_ID;
805
806         if (is_broadcast_ether_addr(addr))
807                 return priv->hw_setting.bcast_sta_id;
808
809         spin_lock_irqsave(&priv->sta_lock, flags);
810         for (i = start; i < priv->hw_setting.max_stations; i++)
811                 if ((priv->stations[i].used) &&
812                     (!compare_ether_addr
813                      (priv->stations[i].sta.sta.addr, addr))) {
814                         ret = i;
815                         goto out;
816                 }
817
818         IWL_DEBUG_INFO("can not find STA %pM (total %d)\n",
819                        addr, priv->num_stations);
820  out:
821         spin_unlock_irqrestore(&priv->sta_lock, flags);
822         return ret;
823 }
824
825 /**
826  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
827  *
828 */
829 void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv,
830                               struct iwl3945_cmd *cmd,
831                               struct ieee80211_tx_info *info,
832                               struct ieee80211_hdr *hdr, int sta_id, int tx_id)
833 {
834         u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
835         u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
836         u16 rate_mask;
837         int rate;
838         u8 rts_retry_limit;
839         u8 data_retry_limit;
840         __le32 tx_flags;
841         __le16 fc = hdr->frame_control;
842
843         rate = iwl3945_rates[rate_index].plcp;
844         tx_flags = cmd->cmd.tx.tx_flags;
845
846         /* We need to figure out how to get the sta->supp_rates while
847          * in this running context */
848         rate_mask = IWL_RATES_MASK;
849
850         if (tx_id >= IWL_CMD_QUEUE_NUM)
851                 rts_retry_limit = 3;
852         else
853                 rts_retry_limit = 7;
854
855         if (ieee80211_is_probe_resp(fc)) {
856                 data_retry_limit = 3;
857                 if (data_retry_limit < rts_retry_limit)
858                         rts_retry_limit = data_retry_limit;
859         } else
860                 data_retry_limit = IWL_DEFAULT_TX_RETRY;
861
862         if (priv->data_retry_limit != -1)
863                 data_retry_limit = priv->data_retry_limit;
864
865         if (ieee80211_is_mgmt(fc)) {
866                 switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
867                 case cpu_to_le16(IEEE80211_STYPE_AUTH):
868                 case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
869                 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
870                 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
871                         if (tx_flags & TX_CMD_FLG_RTS_MSK) {
872                                 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
873                                 tx_flags |= TX_CMD_FLG_CTS_MSK;
874                         }
875                         break;
876                 default:
877                         break;
878                 }
879         }
880
881         cmd->cmd.tx.rts_retry_limit = rts_retry_limit;
882         cmd->cmd.tx.data_retry_limit = data_retry_limit;
883         cmd->cmd.tx.rate = rate;
884         cmd->cmd.tx.tx_flags = tx_flags;
885
886         /* OFDM */
887         cmd->cmd.tx.supp_rates[0] =
888            ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
889
890         /* CCK */
891         cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF);
892
893         IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
894                        "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
895                        cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags),
896                        cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]);
897 }
898
899 u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags)
900 {
901         unsigned long flags_spin;
902         struct iwl3945_station_entry *station;
903
904         if (sta_id == IWL_INVALID_STATION)
905                 return IWL_INVALID_STATION;
906
907         spin_lock_irqsave(&priv->sta_lock, flags_spin);
908         station = &priv->stations[sta_id];
909
910         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
911         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
912         station->sta.mode = STA_CONTROL_MODIFY_MSK;
913
914         spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
915
916         iwl3945_send_add_station(priv, &station->sta, flags);
917         IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
918                         sta_id, tx_rate);
919         return sta_id;
920 }
921
922 static int iwl3945_nic_set_pwr_src(struct iwl3945_priv *priv, int pwr_max)
923 {
924         int rc;
925         unsigned long flags;
926
927         spin_lock_irqsave(&priv->lock, flags);
928         rc = iwl3945_grab_nic_access(priv);
929         if (rc) {
930                 spin_unlock_irqrestore(&priv->lock, flags);
931                 return rc;
932         }
933
934         if (!pwr_max) {
935                 u32 val;
936
937                 rc = pci_read_config_dword(priv->pci_dev,
938                                 PCI_POWER_SOURCE, &val);
939                 if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
940                         iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
941                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
942                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
943                         iwl3945_release_nic_access(priv);
944
945                         iwl3945_poll_bit(priv, CSR_GPIO_IN,
946                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
947                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
948                 } else
949                         iwl3945_release_nic_access(priv);
950         } else {
951                 iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
952                                 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
953                                 ~APMG_PS_CTRL_MSK_PWR_SRC);
954
955                 iwl3945_release_nic_access(priv);
956                 iwl3945_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
957                              CSR_GPIO_IN_BIT_AUX_POWER, 5000);  /* uS */
958         }
959         spin_unlock_irqrestore(&priv->lock, flags);
960
961         return rc;
962 }
963
964 static int iwl3945_rx_init(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
965 {
966         int rc;
967         unsigned long flags;
968
969         spin_lock_irqsave(&priv->lock, flags);
970         rc = iwl3945_grab_nic_access(priv);
971         if (rc) {
972                 spin_unlock_irqrestore(&priv->lock, flags);
973                 return rc;
974         }
975
976         iwl3945_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->dma_addr);
977         iwl3945_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0),
978                              priv->hw_setting.shared_phys +
979                              offsetof(struct iwl3945_shared, rx_read_ptr[0]));
980         iwl3945_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
981         iwl3945_write_direct32(priv, FH39_RCSR_CONFIG(0),
982                 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
983                 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
984                 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
985                 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
986                 (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
987                 FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
988                 (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
989                 FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
990
991         /* fake read to flush all prev I/O */
992         iwl3945_read_direct32(priv, FH39_RSSR_CTRL);
993
994         iwl3945_release_nic_access(priv);
995         spin_unlock_irqrestore(&priv->lock, flags);
996
997         return 0;
998 }
999
1000 static int iwl3945_tx_reset(struct iwl3945_priv *priv)
1001 {
1002         int rc;
1003         unsigned long flags;
1004
1005         spin_lock_irqsave(&priv->lock, flags);
1006         rc = iwl3945_grab_nic_access(priv);
1007         if (rc) {
1008                 spin_unlock_irqrestore(&priv->lock, flags);
1009                 return rc;
1010         }
1011
1012         /* bypass mode */
1013         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
1014
1015         /* RA 0 is active */
1016         iwl3945_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
1017
1018         /* all 6 fifo are active */
1019         iwl3945_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
1020
1021         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
1022         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
1023         iwl3945_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
1024         iwl3945_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
1025
1026         iwl3945_write_direct32(priv, FH39_TSSR_CBB_BASE,
1027                              priv->hw_setting.shared_phys);
1028
1029         iwl3945_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
1030                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
1031                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
1032                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
1033                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
1034                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
1035                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
1036                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
1037
1038         iwl3945_release_nic_access(priv);
1039         spin_unlock_irqrestore(&priv->lock, flags);
1040
1041         return 0;
1042 }
1043
1044 /**
1045  * iwl3945_txq_ctx_reset - Reset TX queue context
1046  *
1047  * Destroys all DMA structures and initialize them again
1048  */
1049 static int iwl3945_txq_ctx_reset(struct iwl3945_priv *priv)
1050 {
1051         int rc;
1052         int txq_id, slots_num;
1053
1054         iwl3945_hw_txq_ctx_free(priv);
1055
1056         /* Tx CMD queue */
1057         rc = iwl3945_tx_reset(priv);
1058         if (rc)
1059                 goto error;
1060
1061         /* Tx queue(s) */
1062         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
1063                 slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
1064                                 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
1065                 rc = iwl3945_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
1066                                 txq_id);
1067                 if (rc) {
1068                         IWL_ERROR("Tx %d queue init failed\n", txq_id);
1069                         goto error;
1070                 }
1071         }
1072
1073         return rc;
1074
1075  error:
1076         iwl3945_hw_txq_ctx_free(priv);
1077         return rc;
1078 }
1079
1080 int iwl3945_hw_nic_init(struct iwl3945_priv *priv)
1081 {
1082         u8 rev_id;
1083         int rc;
1084         unsigned long flags;
1085         struct iwl3945_rx_queue *rxq = &priv->rxq;
1086
1087         iwl3945_power_init_handle(priv);
1088
1089         spin_lock_irqsave(&priv->lock, flags);
1090         iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL);
1091         iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
1092                     CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
1093
1094         iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1095         rc = iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL,
1096                         CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1097         if (rc < 0) {
1098                 spin_unlock_irqrestore(&priv->lock, flags);
1099                 IWL_DEBUG_INFO("Failed to init the card\n");
1100                 return rc;
1101         }
1102
1103         rc = iwl3945_grab_nic_access(priv);
1104         if (rc) {
1105                 spin_unlock_irqrestore(&priv->lock, flags);
1106                 return rc;
1107         }
1108         iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1109                                  APMG_CLK_VAL_DMA_CLK_RQT |
1110                                  APMG_CLK_VAL_BSM_CLK_RQT);
1111         udelay(20);
1112         iwl3945_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
1113                                     APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
1114         iwl3945_release_nic_access(priv);
1115         spin_unlock_irqrestore(&priv->lock, flags);
1116
1117         /* Determine HW type */
1118         rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
1119         if (rc)
1120                 return rc;
1121         IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
1122
1123         iwl3945_nic_set_pwr_src(priv, 1);
1124         spin_lock_irqsave(&priv->lock, flags);
1125
1126         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
1127                 IWL_DEBUG_INFO("RTP type \n");
1128         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
1129                 IWL_DEBUG_INFO("3945 RADIO-MB type\n");
1130                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1131                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
1132         } else {
1133                 IWL_DEBUG_INFO("3945 RADIO-MM type\n");
1134                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1135                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
1136         }
1137
1138         if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) {
1139                 IWL_DEBUG_INFO("SKU OP mode is mrc\n");
1140                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1141                             CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
1142         } else
1143                 IWL_DEBUG_INFO("SKU OP mode is basic\n");
1144
1145         if ((priv->eeprom.board_revision & 0xF0) == 0xD0) {
1146                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1147                                priv->eeprom.board_revision);
1148                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1149                             CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1150         } else {
1151                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1152                                priv->eeprom.board_revision);
1153                 iwl3945_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
1154                               CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1155         }
1156
1157         if (priv->eeprom.almgor_m_version <= 1) {
1158                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1159                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
1160                 IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
1161                                priv->eeprom.almgor_m_version);
1162         } else {
1163                 IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
1164                                priv->eeprom.almgor_m_version);
1165                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1166                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
1167         }
1168         spin_unlock_irqrestore(&priv->lock, flags);
1169
1170         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
1171                 IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
1172
1173         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
1174                 IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
1175
1176         /* Allocate the RX queue, or reset if it is already allocated */
1177         if (!rxq->bd) {
1178                 rc = iwl3945_rx_queue_alloc(priv);
1179                 if (rc) {
1180                         IWL_ERROR("Unable to initialize Rx queue\n");
1181                         return -ENOMEM;
1182                 }
1183         } else
1184                 iwl3945_rx_queue_reset(priv, rxq);
1185
1186         iwl3945_rx_replenish(priv);
1187
1188         iwl3945_rx_init(priv, rxq);
1189
1190         spin_lock_irqsave(&priv->lock, flags);
1191
1192         /* Look at using this instead:
1193         rxq->need_update = 1;
1194         iwl3945_rx_queue_update_write_ptr(priv, rxq);
1195         */
1196
1197         rc = iwl3945_grab_nic_access(priv);
1198         if (rc) {
1199                 spin_unlock_irqrestore(&priv->lock, flags);
1200                 return rc;
1201         }
1202         iwl3945_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
1203         iwl3945_release_nic_access(priv);
1204
1205         spin_unlock_irqrestore(&priv->lock, flags);
1206
1207         rc = iwl3945_txq_ctx_reset(priv);
1208         if (rc)
1209                 return rc;
1210
1211         set_bit(STATUS_INIT, &priv->status);
1212
1213         return 0;
1214 }
1215
1216 /**
1217  * iwl3945_hw_txq_ctx_free - Free TXQ Context
1218  *
1219  * Destroy all TX DMA queues and structures
1220  */
1221 void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv)
1222 {
1223         int txq_id;
1224
1225         /* Tx queues */
1226         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++)
1227                 iwl3945_tx_queue_free(priv, &priv->txq[txq_id]);
1228 }
1229
1230 void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv)
1231 {
1232         int txq_id;
1233         unsigned long flags;
1234
1235         spin_lock_irqsave(&priv->lock, flags);
1236         if (iwl3945_grab_nic_access(priv)) {
1237                 spin_unlock_irqrestore(&priv->lock, flags);
1238                 iwl3945_hw_txq_ctx_free(priv);
1239                 return;
1240         }
1241
1242         /* stop SCD */
1243         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0);
1244
1245         /* reset TFD queues */
1246         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
1247                 iwl3945_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
1248                 iwl3945_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
1249                                 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1250                                 1000);
1251         }
1252
1253         iwl3945_release_nic_access(priv);
1254         spin_unlock_irqrestore(&priv->lock, flags);
1255
1256         iwl3945_hw_txq_ctx_free(priv);
1257 }
1258
1259 int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv)
1260 {
1261         int rc = 0;
1262         u32 reg_val;
1263         unsigned long flags;
1264
1265         spin_lock_irqsave(&priv->lock, flags);
1266
1267         /* set stop master bit */
1268         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
1269
1270         reg_val = iwl3945_read32(priv, CSR_GP_CNTRL);
1271
1272         if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
1273             (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
1274                 IWL_DEBUG_INFO("Card in power save, master is already "
1275                                "stopped\n");
1276         else {
1277                 rc = iwl3945_poll_direct_bit(priv, CSR_RESET,
1278                                   CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
1279                 if (rc < 0) {
1280                         spin_unlock_irqrestore(&priv->lock, flags);
1281                         return rc;
1282                 }
1283         }
1284
1285         spin_unlock_irqrestore(&priv->lock, flags);
1286         IWL_DEBUG_INFO("stop master\n");
1287
1288         return rc;
1289 }
1290
1291 int iwl3945_hw_nic_reset(struct iwl3945_priv *priv)
1292 {
1293         int rc;
1294         unsigned long flags;
1295
1296         iwl3945_hw_nic_stop_master(priv);
1297
1298         spin_lock_irqsave(&priv->lock, flags);
1299
1300         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
1301
1302         iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL,
1303                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1304
1305         rc = iwl3945_grab_nic_access(priv);
1306         if (!rc) {
1307                 iwl3945_write_prph(priv, APMG_CLK_CTRL_REG,
1308                                          APMG_CLK_VAL_BSM_CLK_RQT);
1309
1310                 udelay(10);
1311
1312                 iwl3945_set_bit(priv, CSR_GP_CNTRL,
1313                             CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1314
1315                 iwl3945_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
1316                 iwl3945_write_prph(priv, APMG_RTC_INT_STT_REG,
1317                                         0xFFFFFFFF);
1318
1319                 /* enable DMA */
1320                 iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1321                                          APMG_CLK_VAL_DMA_CLK_RQT |
1322                                          APMG_CLK_VAL_BSM_CLK_RQT);
1323                 udelay(10);
1324
1325                 iwl3945_set_bits_prph(priv, APMG_PS_CTRL_REG,
1326                                 APMG_PS_CTRL_VAL_RESET_REQ);
1327                 udelay(5);
1328                 iwl3945_clear_bits_prph(priv, APMG_PS_CTRL_REG,
1329                                 APMG_PS_CTRL_VAL_RESET_REQ);
1330                 iwl3945_release_nic_access(priv);
1331         }
1332
1333         /* Clear the 'host command active' bit... */
1334         clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
1335
1336         wake_up_interruptible(&priv->wait_command_queue);
1337         spin_unlock_irqrestore(&priv->lock, flags);
1338
1339         return rc;
1340 }
1341
1342 /**
1343  * iwl3945_hw_reg_adjust_power_by_temp
1344  * return index delta into power gain settings table
1345 */
1346 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1347 {
1348         return (new_reading - old_reading) * (-11) / 100;
1349 }
1350
1351 /**
1352  * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1353  */
1354 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1355 {
1356         return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1357 }
1358
1359 int iwl3945_hw_get_temperature(struct iwl3945_priv *priv)
1360 {
1361         return iwl3945_read32(priv, CSR_UCODE_DRV_GP2);
1362 }
1363
1364 /**
1365  * iwl3945_hw_reg_txpower_get_temperature
1366  * get the current temperature by reading from NIC
1367 */
1368 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv *priv)
1369 {
1370         int temperature;
1371
1372         temperature = iwl3945_hw_get_temperature(priv);
1373
1374         /* driver's okay range is -260 to +25.
1375          *   human readable okay range is 0 to +285 */
1376         IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1377
1378         /* handle insane temp reading */
1379         if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1380                 IWL_ERROR("Error bad temperature value  %d\n", temperature);
1381
1382                 /* if really really hot(?),
1383                  *   substitute the 3rd band/group's temp measured at factory */
1384                 if (priv->last_temperature > 100)
1385                         temperature = priv->eeprom.groups[2].temperature;
1386                 else /* else use most recent "sane" value from driver */
1387                         temperature = priv->last_temperature;
1388         }
1389
1390         return temperature;     /* raw, not "human readable" */
1391 }
1392
1393 /* Adjust Txpower only if temperature variance is greater than threshold.
1394  *
1395  * Both are lower than older versions' 9 degrees */
1396 #define IWL_TEMPERATURE_LIMIT_TIMER   6
1397
1398 /**
1399  * is_temp_calib_needed - determines if new calibration is needed
1400  *
1401  * records new temperature in tx_mgr->temperature.
1402  * replaces tx_mgr->last_temperature *only* if calib needed
1403  *    (assumes caller will actually do the calibration!). */
1404 static int is_temp_calib_needed(struct iwl3945_priv *priv)
1405 {
1406         int temp_diff;
1407
1408         priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1409         temp_diff = priv->temperature - priv->last_temperature;
1410
1411         /* get absolute value */
1412         if (temp_diff < 0) {
1413                 IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff);
1414                 temp_diff = -temp_diff;
1415         } else if (temp_diff == 0)
1416                 IWL_DEBUG_POWER("Same temp,\n");
1417         else
1418                 IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff);
1419
1420         /* if we don't need calibration, *don't* update last_temperature */
1421         if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1422                 IWL_DEBUG_POWER("Timed thermal calib not needed\n");
1423                 return 0;
1424         }
1425
1426         IWL_DEBUG_POWER("Timed thermal calib needed\n");
1427
1428         /* assume that caller will actually do calib ...
1429          *   update the "last temperature" value */
1430         priv->last_temperature = priv->temperature;
1431         return 1;
1432 }
1433
1434 #define IWL_MAX_GAIN_ENTRIES 78
1435 #define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
1436 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1437
1438 /* radio and DSP power table, each step is 1/2 dB.
1439  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1440 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1441         {
1442          {251, 127},            /* 2.4 GHz, highest power */
1443          {251, 127},
1444          {251, 127},
1445          {251, 127},
1446          {251, 125},
1447          {251, 110},
1448          {251, 105},
1449          {251, 98},
1450          {187, 125},
1451          {187, 115},
1452          {187, 108},
1453          {187, 99},
1454          {243, 119},
1455          {243, 111},
1456          {243, 105},
1457          {243, 97},
1458          {243, 92},
1459          {211, 106},
1460          {211, 100},
1461          {179, 120},
1462          {179, 113},
1463          {179, 107},
1464          {147, 125},
1465          {147, 119},
1466          {147, 112},
1467          {147, 106},
1468          {147, 101},
1469          {147, 97},
1470          {147, 91},
1471          {115, 107},
1472          {235, 121},
1473          {235, 115},
1474          {235, 109},
1475          {203, 127},
1476          {203, 121},
1477          {203, 115},
1478          {203, 108},
1479          {203, 102},
1480          {203, 96},
1481          {203, 92},
1482          {171, 110},
1483          {171, 104},
1484          {171, 98},
1485          {139, 116},
1486          {227, 125},
1487          {227, 119},
1488          {227, 113},
1489          {227, 107},
1490          {227, 101},
1491          {227, 96},
1492          {195, 113},
1493          {195, 106},
1494          {195, 102},
1495          {195, 95},
1496          {163, 113},
1497          {163, 106},
1498          {163, 102},
1499          {163, 95},
1500          {131, 113},
1501          {131, 106},
1502          {131, 102},
1503          {131, 95},
1504          {99, 113},
1505          {99, 106},
1506          {99, 102},
1507          {99, 95},
1508          {67, 113},
1509          {67, 106},
1510          {67, 102},
1511          {67, 95},
1512          {35, 113},
1513          {35, 106},
1514          {35, 102},
1515          {35, 95},
1516          {3, 113},
1517          {3, 106},
1518          {3, 102},
1519          {3, 95} },             /* 2.4 GHz, lowest power */
1520         {
1521          {251, 127},            /* 5.x GHz, highest power */
1522          {251, 120},
1523          {251, 114},
1524          {219, 119},
1525          {219, 101},
1526          {187, 113},
1527          {187, 102},
1528          {155, 114},
1529          {155, 103},
1530          {123, 117},
1531          {123, 107},
1532          {123, 99},
1533          {123, 92},
1534          {91, 108},
1535          {59, 125},
1536          {59, 118},
1537          {59, 109},
1538          {59, 102},
1539          {59, 96},
1540          {59, 90},
1541          {27, 104},
1542          {27, 98},
1543          {27, 92},
1544          {115, 118},
1545          {115, 111},
1546          {115, 104},
1547          {83, 126},
1548          {83, 121},
1549          {83, 113},
1550          {83, 105},
1551          {83, 99},
1552          {51, 118},
1553          {51, 111},
1554          {51, 104},
1555          {51, 98},
1556          {19, 116},
1557          {19, 109},
1558          {19, 102},
1559          {19, 98},
1560          {19, 93},
1561          {171, 113},
1562          {171, 107},
1563          {171, 99},
1564          {139, 120},
1565          {139, 113},
1566          {139, 107},
1567          {139, 99},
1568          {107, 120},
1569          {107, 113},
1570          {107, 107},
1571          {107, 99},
1572          {75, 120},
1573          {75, 113},
1574          {75, 107},
1575          {75, 99},
1576          {43, 120},
1577          {43, 113},
1578          {43, 107},
1579          {43, 99},
1580          {11, 120},
1581          {11, 113},
1582          {11, 107},
1583          {11, 99},
1584          {131, 107},
1585          {131, 99},
1586          {99, 120},
1587          {99, 113},
1588          {99, 107},
1589          {99, 99},
1590          {67, 120},
1591          {67, 113},
1592          {67, 107},
1593          {67, 99},
1594          {35, 120},
1595          {35, 113},
1596          {35, 107},
1597          {35, 99},
1598          {3, 120} }             /* 5.x GHz, lowest power */
1599 };
1600
1601 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1602 {
1603         if (index < 0)
1604                 return 0;
1605         if (index >= IWL_MAX_GAIN_ENTRIES)
1606                 return IWL_MAX_GAIN_ENTRIES - 1;
1607         return (u8) index;
1608 }
1609
1610 /* Kick off thermal recalibration check every 60 seconds */
1611 #define REG_RECALIB_PERIOD (60)
1612
1613 /**
1614  * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1615  *
1616  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1617  * or 6 Mbit (OFDM) rates.
1618  */
1619 static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv *priv, u32 scan_tbl_index,
1620                                s32 rate_index, const s8 *clip_pwrs,
1621                                struct iwl3945_channel_info *ch_info,
1622                                int band_index)
1623 {
1624         struct iwl3945_scan_power_info *scan_power_info;
1625         s8 power;
1626         u8 power_index;
1627
1628         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1629
1630         /* use this channel group's 6Mbit clipping/saturation pwr,
1631          *   but cap at regulatory scan power restriction (set during init
1632          *   based on eeprom channel data) for this channel.  */
1633         power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1634
1635         /* further limit to user's max power preference.
1636          * FIXME:  Other spectrum management power limitations do not
1637          *   seem to apply?? */
1638         power = min(power, priv->user_txpower_limit);
1639         scan_power_info->requested_power = power;
1640
1641         /* find difference between new scan *power* and current "normal"
1642          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1643          *   current "normal" temperature-compensated Tx power *index* for
1644          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1645          *   *index*. */
1646         power_index = ch_info->power_info[rate_index].power_table_index
1647             - (power - ch_info->power_info
1648                [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1649
1650         /* store reference index that we use when adjusting *all* scan
1651          *   powers.  So we can accommodate user (all channel) or spectrum
1652          *   management (single channel) power changes "between" temperature
1653          *   feedback compensation procedures.
1654          * don't force fit this reference index into gain table; it may be a
1655          *   negative number.  This will help avoid errors when we're at
1656          *   the lower bounds (highest gains, for warmest temperatures)
1657          *   of the table. */
1658
1659         /* don't exceed table bounds for "real" setting */
1660         power_index = iwl3945_hw_reg_fix_power_index(power_index);
1661
1662         scan_power_info->power_table_index = power_index;
1663         scan_power_info->tpc.tx_gain =
1664             power_gain_table[band_index][power_index].tx_gain;
1665         scan_power_info->tpc.dsp_atten =
1666             power_gain_table[band_index][power_index].dsp_atten;
1667 }
1668
1669 /**
1670  * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings
1671  *
1672  * Configures power settings for all rates for the current channel,
1673  * using values from channel info struct, and send to NIC
1674  */
1675 int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv)
1676 {
1677         int rate_idx, i;
1678         const struct iwl3945_channel_info *ch_info = NULL;
1679         struct iwl3945_txpowertable_cmd txpower = {
1680                 .channel = priv->active_rxon.channel,
1681         };
1682
1683         txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1684         ch_info = iwl3945_get_channel_info(priv,
1685                                        priv->band,
1686                                        le16_to_cpu(priv->active_rxon.channel));
1687         if (!ch_info) {
1688                 IWL_ERROR
1689                     ("Failed to get channel info for channel %d [%d]\n",
1690                      le16_to_cpu(priv->active_rxon.channel), priv->band);
1691                 return -EINVAL;
1692         }
1693
1694         if (!is_channel_valid(ch_info)) {
1695                 IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
1696                                 "non-Tx channel.\n");
1697                 return 0;
1698         }
1699
1700         /* fill cmd with power settings for all rates for current channel */
1701         /* Fill OFDM rate */
1702         for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1703              rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) {
1704
1705                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1706                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1707
1708                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1709                                 le16_to_cpu(txpower.channel),
1710                                 txpower.band,
1711                                 txpower.power[i].tpc.tx_gain,
1712                                 txpower.power[i].tpc.dsp_atten,
1713                                 txpower.power[i].rate);
1714         }
1715         /* Fill CCK rates */
1716         for (rate_idx = IWL_FIRST_CCK_RATE;
1717              rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1718                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1719                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1720
1721                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1722                                 le16_to_cpu(txpower.channel),
1723                                 txpower.band,
1724                                 txpower.power[i].tpc.tx_gain,
1725                                 txpower.power[i].tpc.dsp_atten,
1726                                 txpower.power[i].rate);
1727         }
1728
1729         return iwl3945_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1730                         sizeof(struct iwl3945_txpowertable_cmd), &txpower);
1731
1732 }
1733
1734 /**
1735  * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1736  * @ch_info: Channel to update.  Uses power_info.requested_power.
1737  *
1738  * Replace requested_power and base_power_index ch_info fields for
1739  * one channel.
1740  *
1741  * Called if user or spectrum management changes power preferences.
1742  * Takes into account h/w and modulation limitations (clip power).
1743  *
1744  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1745  *
1746  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1747  *       properly fill out the scan powers, and actual h/w gain settings,
1748  *       and send changes to NIC
1749  */
1750 static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv *priv,
1751                              struct iwl3945_channel_info *ch_info)
1752 {
1753         struct iwl3945_channel_power_info *power_info;
1754         int power_changed = 0;
1755         int i;
1756         const s8 *clip_pwrs;
1757         int power;
1758
1759         /* Get this chnlgrp's rate-to-max/clip-powers table */
1760         clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1761
1762         /* Get this channel's rate-to-current-power settings table */
1763         power_info = ch_info->power_info;
1764
1765         /* update OFDM Txpower settings */
1766         for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1767              i++, ++power_info) {
1768                 int delta_idx;
1769
1770                 /* limit new power to be no more than h/w capability */
1771                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1772                 if (power == power_info->requested_power)
1773                         continue;
1774
1775                 /* find difference between old and new requested powers,
1776                  *    update base (non-temp-compensated) power index */
1777                 delta_idx = (power - power_info->requested_power) * 2;
1778                 power_info->base_power_index -= delta_idx;
1779
1780                 /* save new requested power value */
1781                 power_info->requested_power = power;
1782
1783                 power_changed = 1;
1784         }
1785
1786         /* update CCK Txpower settings, based on OFDM 12M setting ...
1787          *    ... all CCK power settings for a given channel are the *same*. */
1788         if (power_changed) {
1789                 power =
1790                     ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1791                     requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1792
1793                 /* do all CCK rates' iwl3945_channel_power_info structures */
1794                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1795                         power_info->requested_power = power;
1796                         power_info->base_power_index =
1797                             ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1798                             base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1799                         ++power_info;
1800                 }
1801         }
1802
1803         return 0;
1804 }
1805
1806 /**
1807  * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1808  *
1809  * NOTE: Returned power limit may be less (but not more) than requested,
1810  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1811  *       (no consideration for h/w clipping limitations).
1812  */
1813 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info *ch_info)
1814 {
1815         s8 max_power;
1816
1817 #if 0
1818         /* if we're using TGd limits, use lower of TGd or EEPROM */
1819         if (ch_info->tgd_data.max_power != 0)
1820                 max_power = min(ch_info->tgd_data.max_power,
1821                                 ch_info->eeprom.max_power_avg);
1822
1823         /* else just use EEPROM limits */
1824         else
1825 #endif
1826                 max_power = ch_info->eeprom.max_power_avg;
1827
1828         return min(max_power, ch_info->max_power_avg);
1829 }
1830
1831 /**
1832  * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1833  *
1834  * Compensate txpower settings of *all* channels for temperature.
1835  * This only accounts for the difference between current temperature
1836  *   and the factory calibration temperatures, and bases the new settings
1837  *   on the channel's base_power_index.
1838  *
1839  * If RxOn is "associated", this sends the new Txpower to NIC!
1840  */
1841 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv)
1842 {
1843         struct iwl3945_channel_info *ch_info = NULL;
1844         int delta_index;
1845         const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1846         u8 a_band;
1847         u8 rate_index;
1848         u8 scan_tbl_index;
1849         u8 i;
1850         int ref_temp;
1851         int temperature = priv->temperature;
1852
1853         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1854         for (i = 0; i < priv->channel_count; i++) {
1855                 ch_info = &priv->channel_info[i];
1856                 a_band = is_channel_a_band(ch_info);
1857
1858                 /* Get this chnlgrp's factory calibration temperature */
1859                 ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
1860                     temperature;
1861
1862                 /* get power index adjustment based on current and factory
1863                  * temps */
1864                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1865                                                               ref_temp);
1866
1867                 /* set tx power value for all rates, OFDM and CCK */
1868                 for (rate_index = 0; rate_index < IWL_RATE_COUNT;
1869                      rate_index++) {
1870                         int power_idx =
1871                             ch_info->power_info[rate_index].base_power_index;
1872
1873                         /* temperature compensate */
1874                         power_idx += delta_index;
1875
1876                         /* stay within table range */
1877                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1878                         ch_info->power_info[rate_index].
1879                             power_table_index = (u8) power_idx;
1880                         ch_info->power_info[rate_index].tpc =
1881                             power_gain_table[a_band][power_idx];
1882                 }
1883
1884                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1885                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1886
1887                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1888                 for (scan_tbl_index = 0;
1889                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1890                         s32 actual_index = (scan_tbl_index == 0) ?
1891                             IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1892                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1893                                            actual_index, clip_pwrs,
1894                                            ch_info, a_band);
1895                 }
1896         }
1897
1898         /* send Txpower command for current channel to ucode */
1899         return iwl3945_hw_reg_send_txpower(priv);
1900 }
1901
1902 int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power)
1903 {
1904         struct iwl3945_channel_info *ch_info;
1905         s8 max_power;
1906         u8 a_band;
1907         u8 i;
1908
1909         if (priv->user_txpower_limit == power) {
1910                 IWL_DEBUG_POWER("Requested Tx power same as current "
1911                                 "limit: %ddBm.\n", power);
1912                 return 0;
1913         }
1914
1915         IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power);
1916         priv->user_txpower_limit = power;
1917
1918         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1919
1920         for (i = 0; i < priv->channel_count; i++) {
1921                 ch_info = &priv->channel_info[i];
1922                 a_band = is_channel_a_band(ch_info);
1923
1924                 /* find minimum power of all user and regulatory constraints
1925                  *    (does not consider h/w clipping limitations) */
1926                 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1927                 max_power = min(power, max_power);
1928                 if (max_power != ch_info->curr_txpow) {
1929                         ch_info->curr_txpow = max_power;
1930
1931                         /* this considers the h/w clipping limitations */
1932                         iwl3945_hw_reg_set_new_power(priv, ch_info);
1933                 }
1934         }
1935
1936         /* update txpower settings for all channels,
1937          *   send to NIC if associated. */
1938         is_temp_calib_needed(priv);
1939         iwl3945_hw_reg_comp_txpower_temp(priv);
1940
1941         return 0;
1942 }
1943
1944 /* will add 3945 channel switch cmd handling later */
1945 int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel)
1946 {
1947         return 0;
1948 }
1949
1950 /**
1951  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
1952  *
1953  * -- reset periodic timer
1954  * -- see if temp has changed enough to warrant re-calibration ... if so:
1955  *     -- correct coeffs for temp (can reset temp timer)
1956  *     -- save this temp as "last",
1957  *     -- send new set of gain settings to NIC
1958  * NOTE:  This should continue working, even when we're not associated,
1959  *   so we can keep our internal table of scan powers current. */
1960 void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv)
1961 {
1962         /* This will kick in the "brute force"
1963          * iwl3945_hw_reg_comp_txpower_temp() below */
1964         if (!is_temp_calib_needed(priv))
1965                 goto reschedule;
1966
1967         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1968          * This is based *only* on current temperature,
1969          * ignoring any previous power measurements */
1970         iwl3945_hw_reg_comp_txpower_temp(priv);
1971
1972  reschedule:
1973         queue_delayed_work(priv->workqueue,
1974                            &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ);
1975 }
1976
1977 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1978 {
1979         struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv,
1980                                              thermal_periodic.work);
1981
1982         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1983                 return;
1984
1985         mutex_lock(&priv->mutex);
1986         iwl3945_reg_txpower_periodic(priv);
1987         mutex_unlock(&priv->mutex);
1988 }
1989
1990 /**
1991  * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1992  *                                 for the channel.
1993  *
1994  * This function is used when initializing channel-info structs.
1995  *
1996  * NOTE: These channel groups do *NOT* match the bands above!
1997  *       These channel groups are based on factory-tested channels;
1998  *       on A-band, EEPROM's "group frequency" entries represent the top
1999  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
2000  */
2001 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv *priv,
2002                                        const struct iwl3945_channel_info *ch_info)
2003 {
2004         struct iwl3945_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0];
2005         u8 group;
2006         u16 group_index = 0;    /* based on factory calib frequencies */
2007         u8 grp_channel;
2008
2009         /* Find the group index for the channel ... don't use index 1(?) */
2010         if (is_channel_a_band(ch_info)) {
2011                 for (group = 1; group < 5; group++) {
2012                         grp_channel = ch_grp[group].group_channel;
2013                         if (ch_info->channel <= grp_channel) {
2014                                 group_index = group;
2015                                 break;
2016                         }
2017                 }
2018                 /* group 4 has a few channels *above* its factory cal freq */
2019                 if (group == 5)
2020                         group_index = 4;
2021         } else
2022                 group_index = 0;        /* 2.4 GHz, group 0 */
2023
2024         IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
2025                         group_index);
2026         return group_index;
2027 }
2028
2029 /**
2030  * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
2031  *
2032  * Interpolate to get nominal (i.e. at factory calibration temperature) index
2033  *   into radio/DSP gain settings table for requested power.
2034  */
2035 static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv *priv,
2036                                        s8 requested_power,
2037                                        s32 setting_index, s32 *new_index)
2038 {
2039         const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
2040         s32 index0, index1;
2041         s32 power = 2 * requested_power;
2042         s32 i;
2043         const struct iwl3945_eeprom_txpower_sample *samples;
2044         s32 gains0, gains1;
2045         s32 res;
2046         s32 denominator;
2047
2048         chnl_grp = &priv->eeprom.groups[setting_index];
2049         samples = chnl_grp->samples;
2050         for (i = 0; i < 5; i++) {
2051                 if (power == samples[i].power) {
2052                         *new_index = samples[i].gain_index;
2053                         return 0;
2054                 }
2055         }
2056
2057         if (power > samples[1].power) {
2058                 index0 = 0;
2059                 index1 = 1;
2060         } else if (power > samples[2].power) {
2061                 index0 = 1;
2062                 index1 = 2;
2063         } else if (power > samples[3].power) {
2064                 index0 = 2;
2065                 index1 = 3;
2066         } else {
2067                 index0 = 3;
2068                 index1 = 4;
2069         }
2070
2071         denominator = (s32) samples[index1].power - (s32) samples[index0].power;
2072         if (denominator == 0)
2073                 return -EINVAL;
2074         gains0 = (s32) samples[index0].gain_index * (1 << 19);
2075         gains1 = (s32) samples[index1].gain_index * (1 << 19);
2076         res = gains0 + (gains1 - gains0) *
2077             ((s32) power - (s32) samples[index0].power) / denominator +
2078             (1 << 18);
2079         *new_index = res >> 19;
2080         return 0;
2081 }
2082
2083 static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv *priv)
2084 {
2085         u32 i;
2086         s32 rate_index;
2087         const struct iwl3945_eeprom_txpower_group *group;
2088
2089         IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
2090
2091         for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
2092                 s8 *clip_pwrs;  /* table of power levels for each rate */
2093                 s8 satur_pwr;   /* saturation power for each chnl group */
2094                 group = &priv->eeprom.groups[i];
2095
2096                 /* sanity check on factory saturation power value */
2097                 if (group->saturation_power < 40) {
2098                         IWL_WARNING("Error: saturation power is %d, "
2099                                     "less than minimum expected 40\n",
2100                                     group->saturation_power);
2101                         return;
2102                 }
2103
2104                 /*
2105                  * Derive requested power levels for each rate, based on
2106                  *   hardware capabilities (saturation power for band).
2107                  * Basic value is 3dB down from saturation, with further
2108                  *   power reductions for highest 3 data rates.  These
2109                  *   backoffs provide headroom for high rate modulation
2110                  *   power peaks, without too much distortion (clipping).
2111                  */
2112                 /* we'll fill in this array with h/w max power levels */
2113                 clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers;
2114
2115                 /* divide factory saturation power by 2 to find -3dB level */
2116                 satur_pwr = (s8) (group->saturation_power >> 1);
2117
2118                 /* fill in channel group's nominal powers for each rate */
2119                 for (rate_index = 0;
2120                      rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
2121                         switch (rate_index) {
2122                         case IWL_RATE_36M_INDEX_TABLE:
2123                                 if (i == 0)     /* B/G */
2124                                         *clip_pwrs = satur_pwr;
2125                                 else    /* A */
2126                                         *clip_pwrs = satur_pwr - 5;
2127                                 break;
2128                         case IWL_RATE_48M_INDEX_TABLE:
2129                                 if (i == 0)
2130                                         *clip_pwrs = satur_pwr - 7;
2131                                 else
2132                                         *clip_pwrs = satur_pwr - 10;
2133                                 break;
2134                         case IWL_RATE_54M_INDEX_TABLE:
2135                                 if (i == 0)
2136                                         *clip_pwrs = satur_pwr - 9;
2137                                 else
2138                                         *clip_pwrs = satur_pwr - 12;
2139                                 break;
2140                         default:
2141                                 *clip_pwrs = satur_pwr;
2142                                 break;
2143                         }
2144                 }
2145         }
2146 }
2147
2148 /**
2149  * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2150  *
2151  * Second pass (during init) to set up priv->channel_info
2152  *
2153  * Set up Tx-power settings in our channel info database for each VALID
2154  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2155  * and current temperature.
2156  *
2157  * Since this is based on current temperature (at init time), these values may
2158  * not be valid for very long, but it gives us a starting/default point,
2159  * and allows us to active (i.e. using Tx) scan.
2160  *
2161  * This does *not* write values to NIC, just sets up our internal table.
2162  */
2163 int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv)
2164 {
2165         struct iwl3945_channel_info *ch_info = NULL;
2166         struct iwl3945_channel_power_info *pwr_info;
2167         int delta_index;
2168         u8 rate_index;
2169         u8 scan_tbl_index;
2170         const s8 *clip_pwrs;    /* array of power levels for each rate */
2171         u8 gain, dsp_atten;
2172         s8 power;
2173         u8 pwr_index, base_pwr_index, a_band;
2174         u8 i;
2175         int temperature;
2176
2177         /* save temperature reference,
2178          *   so we can determine next time to calibrate */
2179         temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2180         priv->last_temperature = temperature;
2181
2182         iwl3945_hw_reg_init_channel_groups(priv);
2183
2184         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2185         for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2186              i++, ch_info++) {
2187                 a_band = is_channel_a_band(ch_info);
2188                 if (!is_channel_valid(ch_info))
2189                         continue;
2190
2191                 /* find this channel's channel group (*not* "band") index */
2192                 ch_info->group_index =
2193                         iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2194
2195                 /* Get this chnlgrp's rate->max/clip-powers table */
2196                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
2197
2198                 /* calculate power index *adjustment* value according to
2199                  *  diff between current temperature and factory temperature */
2200                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2201                                 priv->eeprom.groups[ch_info->group_index].
2202                                 temperature);
2203
2204                 IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
2205                                 ch_info->channel, delta_index, temperature +
2206                                 IWL_TEMP_CONVERT);
2207
2208                 /* set tx power value for all OFDM rates */
2209                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2210                      rate_index++) {
2211                         s32 uninitialized_var(power_idx);
2212                         int rc;
2213
2214                         /* use channel group's clip-power table,
2215                          *   but don't exceed channel's max power */
2216                         s8 pwr = min(ch_info->max_power_avg,
2217                                      clip_pwrs[rate_index]);
2218
2219                         pwr_info = &ch_info->power_info[rate_index];
2220
2221                         /* get base (i.e. at factory-measured temperature)
2222                          *    power table index for this rate's power */
2223                         rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2224                                                          ch_info->group_index,
2225                                                          &power_idx);
2226                         if (rc) {
2227                                 IWL_ERROR("Invalid power index\n");
2228                                 return rc;
2229                         }
2230                         pwr_info->base_power_index = (u8) power_idx;
2231
2232                         /* temperature compensate */
2233                         power_idx += delta_index;
2234
2235                         /* stay within range of gain table */
2236                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2237
2238                         /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2239                         pwr_info->requested_power = pwr;
2240                         pwr_info->power_table_index = (u8) power_idx;
2241                         pwr_info->tpc.tx_gain =
2242                             power_gain_table[a_band][power_idx].tx_gain;
2243                         pwr_info->tpc.dsp_atten =
2244                             power_gain_table[a_band][power_idx].dsp_atten;
2245                 }
2246
2247                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2248                 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2249                 power = pwr_info->requested_power +
2250                         IWL_CCK_FROM_OFDM_POWER_DIFF;
2251                 pwr_index = pwr_info->power_table_index +
2252                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2253                 base_pwr_index = pwr_info->base_power_index +
2254                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2255
2256                 /* stay within table range */
2257                 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2258                 gain = power_gain_table[a_band][pwr_index].tx_gain;
2259                 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2260
2261                 /* fill each CCK rate's iwl3945_channel_power_info structure
2262                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2263                  * NOTE:  CCK rates start at end of OFDM rates! */
2264                 for (rate_index = 0;
2265                      rate_index < IWL_CCK_RATES; rate_index++) {
2266                         pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2267                         pwr_info->requested_power = power;
2268                         pwr_info->power_table_index = pwr_index;
2269                         pwr_info->base_power_index = base_pwr_index;
2270                         pwr_info->tpc.tx_gain = gain;
2271                         pwr_info->tpc.dsp_atten = dsp_atten;
2272                 }
2273
2274                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2275                 for (scan_tbl_index = 0;
2276                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2277                         s32 actual_index = (scan_tbl_index == 0) ?
2278                                 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2279                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2280                                 actual_index, clip_pwrs, ch_info, a_band);
2281                 }
2282         }
2283
2284         return 0;
2285 }
2286
2287 int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv)
2288 {
2289         int rc;
2290         unsigned long flags;
2291
2292         spin_lock_irqsave(&priv->lock, flags);
2293         rc = iwl3945_grab_nic_access(priv);
2294         if (rc) {
2295                 spin_unlock_irqrestore(&priv->lock, flags);
2296                 return rc;
2297         }
2298
2299         iwl3945_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
2300         rc = iwl3945_poll_direct_bit(priv, FH39_RSSR_STATUS,
2301                         FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2302         if (rc < 0)
2303                 IWL_ERROR("Can't stop Rx DMA.\n");
2304
2305         iwl3945_release_nic_access(priv);
2306         spin_unlock_irqrestore(&priv->lock, flags);
2307
2308         return 0;
2309 }
2310
2311 int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
2312 {
2313         int rc;
2314         unsigned long flags;
2315         int txq_id = txq->q.id;
2316
2317         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2318
2319         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2320
2321         spin_lock_irqsave(&priv->lock, flags);
2322         rc = iwl3945_grab_nic_access(priv);
2323         if (rc) {
2324                 spin_unlock_irqrestore(&priv->lock, flags);
2325                 return rc;
2326         }
2327         iwl3945_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
2328         iwl3945_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
2329
2330         iwl3945_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
2331                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2332                 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2333                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2334                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2335                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2336         iwl3945_release_nic_access(priv);
2337
2338         /* fake read to flush all prev. writes */
2339         iwl3945_read32(priv, FH39_TSSR_CBB_BASE);
2340         spin_unlock_irqrestore(&priv->lock, flags);
2341
2342         return 0;
2343 }
2344
2345 int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv)
2346 {
2347         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2348
2349         return le32_to_cpu(shared_data->rx_read_ptr[0]);
2350 }
2351
2352 /**
2353  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2354  */
2355 int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv)
2356 {
2357         int rc, i, index, prev_index;
2358         struct iwl3945_rate_scaling_cmd rate_cmd = {
2359                 .reserved = {0, 0, 0},
2360         };
2361         struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2362
2363         for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2364                 index = iwl3945_rates[i].table_rs_index;
2365
2366                 table[index].rate_n_flags =
2367                         iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2368                 table[index].try_cnt = priv->retry_rate;
2369                 prev_index = iwl3945_get_prev_ieee_rate(i);
2370                 table[index].next_rate_index =
2371                                 iwl3945_rates[prev_index].table_rs_index;
2372         }
2373
2374         switch (priv->band) {
2375         case IEEE80211_BAND_5GHZ:
2376                 IWL_DEBUG_RATE("Select A mode rate scale\n");
2377                 /* If one of the following CCK rates is used,
2378                  * have it fall back to the 6M OFDM rate */
2379                 for (i = IWL_RATE_1M_INDEX_TABLE;
2380                         i <= IWL_RATE_11M_INDEX_TABLE; i++)
2381                         table[i].next_rate_index =
2382                           iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2383
2384                 /* Don't fall back to CCK rates */
2385                 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
2386                                                 IWL_RATE_9M_INDEX_TABLE;
2387
2388                 /* Don't drop out of OFDM rates */
2389                 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2390                     iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2391                 break;
2392
2393         case IEEE80211_BAND_2GHZ:
2394                 IWL_DEBUG_RATE("Select B/G mode rate scale\n");
2395                 /* If an OFDM rate is used, have it fall back to the
2396                  * 1M CCK rates */
2397
2398                 if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
2399                     iwl3945_is_associated(priv)) {
2400
2401                         index = IWL_FIRST_CCK_RATE;
2402                         for (i = IWL_RATE_6M_INDEX_TABLE;
2403                              i <= IWL_RATE_54M_INDEX_TABLE; i++)
2404                                 table[i].next_rate_index =
2405                                         iwl3945_rates[index].table_rs_index;
2406
2407                         index = IWL_RATE_11M_INDEX_TABLE;
2408                         /* CCK shouldn't fall back to OFDM... */
2409                         table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2410                 }
2411                 break;
2412
2413         default:
2414                 WARN_ON(1);
2415                 break;
2416         }
2417
2418         /* Update the rate scaling for control frame Tx */
2419         rate_cmd.table_id = 0;
2420         rc = iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2421                               &rate_cmd);
2422         if (rc)
2423                 return rc;
2424
2425         /* Update the rate scaling for data frame Tx */
2426         rate_cmd.table_id = 1;
2427         return iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2428                                 &rate_cmd);
2429 }
2430
2431 /* Called when initializing driver */
2432 int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv)
2433 {
2434         memset((void *)&priv->hw_setting, 0,
2435                sizeof(struct iwl3945_driver_hw_info));
2436
2437         priv->hw_setting.shared_virt =
2438             pci_alloc_consistent(priv->pci_dev,
2439                                  sizeof(struct iwl3945_shared),
2440                                  &priv->hw_setting.shared_phys);
2441
2442         if (!priv->hw_setting.shared_virt) {
2443                 IWL_ERROR("failed to allocate pci memory\n");
2444                 mutex_unlock(&priv->mutex);
2445                 return -ENOMEM;
2446         }
2447
2448         priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE;
2449         priv->hw_setting.max_pkt_size = 2342;
2450         priv->hw_setting.tx_cmd_len = sizeof(struct iwl3945_tx_cmd);
2451         priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
2452         priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
2453         priv->hw_setting.max_stations = IWL3945_STATION_COUNT;
2454         priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID;
2455
2456         priv->hw_setting.tx_ant_num = 2;
2457         return 0;
2458 }
2459
2460 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
2461                           struct iwl3945_frame *frame, u8 rate)
2462 {
2463         struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2464         unsigned int frame_size;
2465
2466         tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2467         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2468
2469         tx_beacon_cmd->tx.sta_id = priv->hw_setting.bcast_sta_id;
2470         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2471
2472         frame_size = iwl3945_fill_beacon_frame(priv,
2473                                 tx_beacon_cmd->frame,
2474                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2475
2476         BUG_ON(frame_size > MAX_MPDU_SIZE);
2477         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2478
2479         tx_beacon_cmd->tx.rate = rate;
2480         tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2481                                       TX_CMD_FLG_TSF_MSK);
2482
2483         /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2484         tx_beacon_cmd->tx.supp_rates[0] =
2485                 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2486
2487         tx_beacon_cmd->tx.supp_rates[1] =
2488                 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2489
2490         return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2491 }
2492
2493 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv)
2494 {
2495         priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2496         priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2497 }
2498
2499 void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv)
2500 {
2501         INIT_DELAYED_WORK(&priv->thermal_periodic,
2502                           iwl3945_bg_reg_txpower_periodic);
2503 }
2504
2505 void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv)
2506 {
2507         cancel_delayed_work(&priv->thermal_periodic);
2508 }
2509
2510 static struct iwl_3945_cfg iwl3945_bg_cfg = {
2511         .name = "3945BG",
2512         .fw_name_pre = IWL3945_FW_PRE,
2513         .ucode_api_max = IWL3945_UCODE_API_MAX,
2514         .ucode_api_min = IWL3945_UCODE_API_MIN,
2515         .sku = IWL_SKU_G,
2516 };
2517
2518 static struct iwl_3945_cfg iwl3945_abg_cfg = {
2519         .name = "3945ABG",
2520         .fw_name_pre = IWL3945_FW_PRE,
2521         .ucode_api_max = IWL3945_UCODE_API_MAX,
2522         .ucode_api_min = IWL3945_UCODE_API_MIN,
2523         .sku = IWL_SKU_A|IWL_SKU_G,
2524 };
2525
2526 struct pci_device_id iwl3945_hw_card_ids[] = {
2527         {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2528         {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2529         {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2530         {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2531         {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2532         {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2533         {0}
2534 };
2535
2536 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);