SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10
  11   Some parts of the code in this file are derived from the ipw2200
  12   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  13
  14   This program is free software; you can redistribute it and/or modify
  15   it under the terms of the GNU General Public License as published by
  16   the Free Software Foundation; either version 2 of the License, or
  17   (at your option) any later version.
  18
  19   This program is distributed in the hope that it will be useful,
  20   but WITHOUT ANY WARRANTY; without even the implied warranty of
  21   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22   GNU General Public License for more details.
  23
  24   You should have received a copy of the GNU General Public License
  25   along with this program; see the file COPYING.  If not, write to
  26   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  27   Boston, MA 02110-1301, USA.
  28
  29 */
  30
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/moduleparam.h>
  34 #include <linux/if_arp.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/version.h>
  37 #include <linux/firmware.h>
  38 #include <linux/wireless.h>
  39 #include <linux/workqueue.h>
  40 #include <linux/skbuff.h>
  41 #include <linux/dma-mapping.h>
  42 #include <asm/unaligned.h>
  43
  44 #include "b43.h"
  45 #include "main.h"
  46 #include "debugfs.h"
  47 #include "phy.h"
  48 #include "dma.h"
  49 #include "sysfs.h"
  50 #include "xmit.h"
  51 #include "lo.h"
  52 #include "pcmcia.h"
  53
  54 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  55 MODULE_AUTHOR("Martin Langer");
  56 MODULE_AUTHOR("Stefano Brivio");
  57 MODULE_AUTHOR("Michael Buesch");
  58 MODULE_LICENSE("GPL");
  59
  60
  61 static int modparam_bad_frames_preempt;
  62 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  63 MODULE_PARM_DESC(bad_frames_preempt,
  64                  "enable(1) / disable(0) Bad Frames Preemption");
  65
  66 static char modparam_fwpostfix[16];
  67 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  68 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  69
  70 static int modparam_hwpctl;
  71 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  72 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  73
  74 static int modparam_nohwcrypt;
  75 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  76 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  77
  78 static const struct ssb_device_id b43_ssb_tbl[] = {
  79         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
  80         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
  81         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
  82         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
  83         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
  84         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
  85         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
  86         SSB_DEVTABLE_END
  87 };
  88
  89 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
  90
  91 /* Channel and ratetables are shared for all devices.
  92  * They can't be const, because ieee80211 puts some precalculated
  93  * data in there. This data is the same for all devices, so we don't
  94  * get concurrency issues */
  95 #define RATETAB_ENT(_rateid, _flags) \
  96         {                                                       \
  97                 .rate   = B43_RATE_TO_BASE100KBPS(_rateid),     \
  98                 .val    = (_rateid),                            \
  99                 .val2   = (_rateid),                            \
 100                 .flags  = (_flags),                             \
 101         }
 102 static struct ieee80211_rate __b43_ratetable[] = {
 103         RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK),
 104         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2),
 105         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2),
 106         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2),
 107         RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM),
 108         RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM),
 109         RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM),
 110         RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM),
 111         RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM),
 112         RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM),
 113         RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM),
 114         RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM),
 115 };
 116
 117 #define b43_a_ratetable         (__b43_ratetable + 4)
 118 #define b43_a_ratetable_size    8
 119 #define b43_b_ratetable         (__b43_ratetable + 0)
 120 #define b43_b_ratetable_size    4
 121 #define b43_g_ratetable         (__b43_ratetable + 0)
 122 #define b43_g_ratetable_size    12
 123
 124 #define CHANTAB_ENT(_chanid, _freq) \
 125         {                                                       \
 126                 .chan   = (_chanid),                            \
 127                 .freq   = (_freq),                              \
 128                 .val    = (_chanid),                            \
 129                 .flag   = IEEE80211_CHAN_W_SCAN |               \
 130                           IEEE80211_CHAN_W_ACTIVE_SCAN |        \
 131                           IEEE80211_CHAN_W_IBSS,                \
 132                 .power_level    = 0xFF,                         \
 133                 .antenna_max    = 0xFF,                         \
 134         }
 135 static struct ieee80211_channel b43_2ghz_chantable[] = {
 136         CHANTAB_ENT(1, 2412),
 137         CHANTAB_ENT(2, 2417),
 138         CHANTAB_ENT(3, 2422),
 139         CHANTAB_ENT(4, 2427),
 140         CHANTAB_ENT(5, 2432),
 141         CHANTAB_ENT(6, 2437),
 142         CHANTAB_ENT(7, 2442),
 143         CHANTAB_ENT(8, 2447),
 144         CHANTAB_ENT(9, 2452),
 145         CHANTAB_ENT(10, 2457),
 146         CHANTAB_ENT(11, 2462),
 147         CHANTAB_ENT(12, 2467),
 148         CHANTAB_ENT(13, 2472),
 149         CHANTAB_ENT(14, 2484),
 150 };
 151 #define b43_2ghz_chantable_size ARRAY_SIZE(b43_2ghz_chantable)
 152
 153 #if 0
 154 static struct ieee80211_channel b43_5ghz_chantable[] = {
 155         CHANTAB_ENT(36, 5180),
 156         CHANTAB_ENT(40, 5200),
 157         CHANTAB_ENT(44, 5220),
 158         CHANTAB_ENT(48, 5240),
 159         CHANTAB_ENT(52, 5260),
 160         CHANTAB_ENT(56, 5280),
 161         CHANTAB_ENT(60, 5300),
 162         CHANTAB_ENT(64, 5320),
 163         CHANTAB_ENT(149, 5745),
 164         CHANTAB_ENT(153, 5765),
 165         CHANTAB_ENT(157, 5785),
 166         CHANTAB_ENT(161, 5805),
 167         CHANTAB_ENT(165, 5825),
 168 };
 169 #define b43_5ghz_chantable_size ARRAY_SIZE(b43_5ghz_chantable)
 170 #endif
 171
 172 static void b43_wireless_core_exit(struct b43_wldev *dev);
 173 static int b43_wireless_core_init(struct b43_wldev *dev);
 174 static void b43_wireless_core_stop(struct b43_wldev *dev);
 175 static int b43_wireless_core_start(struct b43_wldev *dev);
 176
 177 static int b43_ratelimit(struct b43_wl *wl)
 178 {
 179         if (!wl || !wl->current_dev)
 180                 return 1;
 181         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 182                 return 1;
 183         /* We are up and running.
 184          * Ratelimit the messages to avoid DoS over the net. */
 185         return net_ratelimit();
 186 }
 187
 188 void b43info(struct b43_wl *wl, const char *fmt, ...)
 189 {
 190         va_list args;
 191
 192         if (!b43_ratelimit(wl))
 193                 return;
 194         va_start(args, fmt);
 195         printk(KERN_INFO "b43-%s: ",
 196                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 197         vprintk(fmt, args);
 198         va_end(args);
 199 }
 200
 201 void b43err(struct b43_wl *wl, const char *fmt, ...)
 202 {
 203         va_list args;
 204
 205         if (!b43_ratelimit(wl))
 206                 return;
 207         va_start(args, fmt);
 208         printk(KERN_ERR "b43-%s ERROR: ",
 209                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 210         vprintk(fmt, args);
 211         va_end(args);
 212 }
 213
 214 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 215 {
 216         va_list args;
 217
 218         if (!b43_ratelimit(wl))
 219                 return;
 220         va_start(args, fmt);
 221         printk(KERN_WARNING "b43-%s warning: ",
 222                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 223         vprintk(fmt, args);
 224         va_end(args);
 225 }
 226
 227 #if B43_DEBUG
 228 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 229 {
 230         va_list args;
 231
 232         va_start(args, fmt);
 233         printk(KERN_DEBUG "b43-%s debug: ",
 234                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 235         vprintk(fmt, args);
 236         va_end(args);
 237 }
 238 #endif /* DEBUG */
 239
 240 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 241 {
 242         u32 macctl;
 243
 244         B43_WARN_ON(offset % 4 != 0);
 245
 246         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 247         if (macctl & B43_MACCTL_BE)
 248                 val = swab32(val);
 249
 250         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 251         mmiowb();
 252         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 253 }
 254
 255 static inline void b43_shm_control_word(struct b43_wldev *dev,
 256                                         u16 routing, u16 offset)
 257 {
 258         u32 control;
 259
 260         /* "offset" is the WORD offset. */
 261         control = routing;
 262         control <<= 16;
 263         control |= offset;
 264         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 265 }
 266
 267 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 268 {
 269         struct b43_wl *wl = dev->wl;
 270         unsigned long flags;
 271         u32 ret;
 272
 273         spin_lock_irqsave(&wl->shm_lock, flags);
 274         if (routing == B43_SHM_SHARED) {
 275                 B43_WARN_ON(offset & 0x0001);
 276                 if (offset & 0x0003) {
 277                         /* Unaligned access */
 278                         b43_shm_control_word(dev, routing, offset >> 2);
 279                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 280                         ret <<= 16;
 281                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 282                         ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
 283
 284                         goto out;
 285                 }
 286                 offset >>= 2;
 287         }
 288         b43_shm_control_word(dev, routing, offset);
 289         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 290 out:
 291         spin_unlock_irqrestore(&wl->shm_lock, flags);
 292
 293         return ret;
 294 }
 295
 296 u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
 297 {
 298         struct b43_wl *wl = dev->wl;
 299         unsigned long flags;
 300         u16 ret;
 301
 302         spin_lock_irqsave(&wl->shm_lock, flags);
 303         if (routing == B43_SHM_SHARED) {
 304                 B43_WARN_ON(offset & 0x0001);
 305                 if (offset & 0x0003) {
 306                         /* Unaligned access */
 307                         b43_shm_control_word(dev, routing, offset >> 2);
 308                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 309
 310                         goto out;
 311                 }
 312                 offset >>= 2;
 313         }
 314         b43_shm_control_word(dev, routing, offset);
 315         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 316 out:
 317         spin_unlock_irqrestore(&wl->shm_lock, flags);
 318
 319         return ret;
 320 }
 321
 322 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 323 {
 324         struct b43_wl *wl = dev->wl;
 325         unsigned long flags;
 326
 327         spin_lock_irqsave(&wl->shm_lock, flags);
 328         if (routing == B43_SHM_SHARED) {
 329                 B43_WARN_ON(offset & 0x0001);
 330                 if (offset & 0x0003) {
 331                         /* Unaligned access */
 332                         b43_shm_control_word(dev, routing, offset >> 2);
 333                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 334                                     (value >> 16) & 0xffff);
 335                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 336                         b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
 337                         goto out;
 338                 }
 339                 offset >>= 2;
 340         }
 341         b43_shm_control_word(dev, routing, offset);
 342         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 343 out:
 344         spin_unlock_irqrestore(&wl->shm_lock, flags);
 345 }
 346
 347 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 348 {
 349         struct b43_wl *wl = dev->wl;
 350         unsigned long flags;
 351
 352         spin_lock_irqsave(&wl->shm_lock, flags);
 353         if (routing == B43_SHM_SHARED) {
 354                 B43_WARN_ON(offset & 0x0001);
 355                 if (offset & 0x0003) {
 356                         /* Unaligned access */
 357                         b43_shm_control_word(dev, routing, offset >> 2);
 358                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 359                         goto out;
 360                 }
 361                 offset >>= 2;
 362         }
 363         b43_shm_control_word(dev, routing, offset);
 364         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 365 out:
 366         spin_unlock_irqrestore(&wl->shm_lock, flags);
 367 }
 368
 369 /* Read HostFlags */
 370 u32 b43_hf_read(struct b43_wldev * dev)
 371 {
 372         u32 ret;
 373
 374         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 375         ret <<= 16;
 376         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 377
 378         return ret;
 379 }
 380
 381 /* Write HostFlags */
 382 void b43_hf_write(struct b43_wldev *dev, u32 value)
 383 {
 384         b43_shm_write16(dev, B43_SHM_SHARED,
 385                         B43_SHM_SH_HOSTFLO, (value & 0x0000FFFF));
 386         b43_shm_write16(dev, B43_SHM_SHARED,
 387                         B43_SHM_SH_HOSTFHI, ((value & 0xFFFF0000) >> 16));
 388 }
 389
 390 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
 391 {
 392         /* We need to be careful. As we read the TSF from multiple
 393          * registers, we should take care of register overflows.
 394          * In theory, the whole tsf read process should be atomic.
 395          * We try to be atomic here, by restaring the read process,
 396          * if any of the high registers changed (overflew).
 397          */
 398         if (dev->dev->id.revision >= 3) {
 399                 u32 low, high, high2;
 400
 401                 do {
 402                         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 403                         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 404                         high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 405                 } while (unlikely(high != high2));
 406
 407                 *tsf = high;
 408                 *tsf <<= 32;
 409                 *tsf |= low;
 410         } else {
 411                 u64 tmp;
 412                 u16 v0, v1, v2, v3;
 413                 u16 test1, test2, test3;
 414
 415                 do {
 416                         v3 = b43_read16(dev, B43_MMIO_TSF_3);
 417                         v2 = b43_read16(dev, B43_MMIO_TSF_2);
 418                         v1 = b43_read16(dev, B43_MMIO_TSF_1);
 419                         v0 = b43_read16(dev, B43_MMIO_TSF_0);
 420
 421                         test3 = b43_read16(dev, B43_MMIO_TSF_3);
 422                         test2 = b43_read16(dev, B43_MMIO_TSF_2);
 423                         test1 = b43_read16(dev, B43_MMIO_TSF_1);
 424                 } while (v3 != test3 || v2 != test2 || v1 != test1);
 425
 426                 *tsf = v3;
 427                 *tsf <<= 48;
 428                 tmp = v2;
 429                 tmp <<= 32;
 430                 *tsf |= tmp;
 431                 tmp = v1;
 432                 tmp <<= 16;
 433                 *tsf |= tmp;
 434                 *tsf |= v0;
 435         }
 436 }
 437
 438 static void b43_time_lock(struct b43_wldev *dev)
 439 {
 440         u32 macctl;
 441
 442         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 443         macctl |= B43_MACCTL_TBTTHOLD;
 444         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 445         /* Commit the write */
 446         b43_read32(dev, B43_MMIO_MACCTL);
 447 }
 448
 449 static void b43_time_unlock(struct b43_wldev *dev)
 450 {
 451         u32 macctl;
 452
 453         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 454         macctl &= ~B43_MACCTL_TBTTHOLD;
 455         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 456         /* Commit the write */
 457         b43_read32(dev, B43_MMIO_MACCTL);
 458 }
 459
 460 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 461 {
 462         /* Be careful with the in-progress timer.
 463          * First zero out the low register, so we have a full
 464          * register-overflow duration to complete the operation.
 465          */
 466         if (dev->dev->id.revision >= 3) {
 467                 u32 lo = (tsf & 0x00000000FFFFFFFFULL);
 468                 u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
 469
 470                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0);
 471                 mmiowb();
 472                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi);
 473                 mmiowb();
 474                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo);
 475         } else {
 476                 u16 v0 = (tsf & 0x000000000000FFFFULL);
 477                 u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
 478                 u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
 479                 u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
 480
 481                 b43_write16(dev, B43_MMIO_TSF_0, 0);
 482                 mmiowb();
 483                 b43_write16(dev, B43_MMIO_TSF_3, v3);
 484                 mmiowb();
 485                 b43_write16(dev, B43_MMIO_TSF_2, v2);
 486                 mmiowb();
 487                 b43_write16(dev, B43_MMIO_TSF_1, v1);
 488                 mmiowb();
 489                 b43_write16(dev, B43_MMIO_TSF_0, v0);
 490         }
 491 }
 492
 493 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 494 {
 495         b43_time_lock(dev);
 496         b43_tsf_write_locked(dev, tsf);
 497         b43_time_unlock(dev);
 498 }
 499
 500 static
 501 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
 502 {
 503         static const u8 zero_addr[ETH_ALEN] = { 0 };
 504         u16 data;
 505
 506         if (!mac)
 507                 mac = zero_addr;
 508
 509         offset |= 0x0020;
 510         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 511
 512         data = mac[0];
 513         data |= mac[1] << 8;
 514         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 515         data = mac[2];
 516         data |= mac[3] << 8;
 517         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 518         data = mac[4];
 519         data |= mac[5] << 8;
 520         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 521 }
 522
 523 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 524 {
 525         const u8 *mac;
 526         const u8 *bssid;
 527         u8 mac_bssid[ETH_ALEN * 2];
 528         int i;
 529         u32 tmp;
 530
 531         bssid = dev->wl->bssid;
 532         mac = dev->wl->mac_addr;
 533
 534         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 535
 536         memcpy(mac_bssid, mac, ETH_ALEN);
 537         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 538
 539         /* Write our MAC address and BSSID to template ram */
 540         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 541                 tmp = (u32) (mac_bssid[i + 0]);
 542                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 543                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 544                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 545                 b43_ram_write(dev, 0x20 + i, tmp);
 546         }
 547 }
 548
 549 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 550 {
 551         b43_write_mac_bssid_templates(dev);
 552         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 553 }
 554
 555 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 556 {
 557         /* slot_time is in usec. */
 558         if (dev->phy.type != B43_PHYTYPE_G)
 559                 return;
 560         b43_write16(dev, 0x684, 510 + slot_time);
 561         b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 562 }
 563
 564 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 565 {
 566         b43_set_slot_time(dev, 9);
 567         dev->short_slot = 1;
 568 }
 569
 570 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 571 {
 572         b43_set_slot_time(dev, 20);
 573         dev->short_slot = 0;
 574 }
 575
 576 /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
 577  * Returns the _previously_ enabled IRQ mask.
 578  */
 579 static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
 580 {
 581         u32 old_mask;
 582
 583         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 584         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
 585
 586         return old_mask;
 587 }
 588
 589 /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
 590  * Returns the _previously_ enabled IRQ mask.
 591  */
 592 static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
 593 {
 594         u32 old_mask;
 595
 596         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 597         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
 598
 599         return old_mask;
 600 }
 601
 602 /* Synchronize IRQ top- and bottom-half.
 603  * IRQs must be masked before calling this.
 604  * This must not be called with the irq_lock held.
 605  */
 606 static void b43_synchronize_irq(struct b43_wldev *dev)
 607 {
 608         synchronize_irq(dev->dev->irq);
 609         tasklet_kill(&dev->isr_tasklet);
 610 }
 611
 612 /* DummyTransmission function, as documented on
 613  * http://bcm-specs.sipsolutions.net/DummyTransmission
 614  */
 615 void b43_dummy_transmission(struct b43_wldev *dev)
 616 {
 617         struct b43_phy *phy = &dev->phy;
 618         unsigned int i, max_loop;
 619         u16 value;
 620         u32 buffer[5] = {
 621                 0x00000000,
 622                 0x00D40000,
 623                 0x00000000,
 624                 0x01000000,
 625                 0x00000000,
 626         };
 627
 628         switch (phy->type) {
 629         case B43_PHYTYPE_A:
 630                 max_loop = 0x1E;
 631                 buffer[0] = 0x000201CC;
 632                 break;
 633         case B43_PHYTYPE_B:
 634         case B43_PHYTYPE_G:
 635                 max_loop = 0xFA;
 636                 buffer[0] = 0x000B846E;
 637                 break;
 638         default:
 639                 B43_WARN_ON(1);
 640                 return;
 641         }
 642
 643         for (i = 0; i < 5; i++)
 644                 b43_ram_write(dev, i * 4, buffer[i]);
 645
 646         /* Commit writes */
 647         b43_read32(dev, B43_MMIO_MACCTL);
 648
 649         b43_write16(dev, 0x0568, 0x0000);
 650         b43_write16(dev, 0x07C0, 0x0000);
 651         value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
 652         b43_write16(dev, 0x050C, value);
 653         b43_write16(dev, 0x0508, 0x0000);
 654         b43_write16(dev, 0x050A, 0x0000);
 655         b43_write16(dev, 0x054C, 0x0000);
 656         b43_write16(dev, 0x056A, 0x0014);
 657         b43_write16(dev, 0x0568, 0x0826);
 658         b43_write16(dev, 0x0500, 0x0000);
 659         b43_write16(dev, 0x0502, 0x0030);
 660
 661         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 662                 b43_radio_write16(dev, 0x0051, 0x0017);
 663         for (i = 0x00; i < max_loop; i++) {
 664                 value = b43_read16(dev, 0x050E);
 665                 if (value & 0x0080)
 666                         break;
 667                 udelay(10);
 668         }
 669         for (i = 0x00; i < 0x0A; i++) {
 670                 value = b43_read16(dev, 0x050E);
 671                 if (value & 0x0400)
 672                         break;
 673                 udelay(10);
 674         }
 675         for (i = 0x00; i < 0x0A; i++) {
 676                 value = b43_read16(dev, 0x0690);
 677                 if (!(value & 0x0100))
 678                         break;
 679                 udelay(10);
 680         }
 681         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 682                 b43_radio_write16(dev, 0x0051, 0x0037);
 683 }
 684
 685 static void key_write(struct b43_wldev *dev,
 686                       u8 index, u8 algorithm, const u8 * key)
 687 {
 688         unsigned int i;
 689         u32 offset;
 690         u16 value;
 691         u16 kidx;
 692
 693         /* Key index/algo block */
 694         kidx = b43_kidx_to_fw(dev, index);
 695         value = ((kidx << 4) | algorithm);
 696         b43_shm_write16(dev, B43_SHM_SHARED,
 697                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 698
 699         /* Write the key to the Key Table Pointer offset */
 700         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 701         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 702                 value = key[i];
 703                 value |= (u16) (key[i + 1]) << 8;
 704                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 705         }
 706 }
 707
 708 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
 709 {
 710         u32 addrtmp[2] = { 0, 0, };
 711         u8 per_sta_keys_start = 8;
 712
 713         if (b43_new_kidx_api(dev))
 714                 per_sta_keys_start = 4;
 715
 716         B43_WARN_ON(index < per_sta_keys_start);
 717         /* We have two default TX keys and possibly two default RX keys.
 718          * Physical mac 0 is mapped to physical key 4 or 8, depending
 719          * on the firmware version.
 720          * So we must adjust the index here.
 721          */
 722         index -= per_sta_keys_start;
 723
 724         if (addr) {
 725                 addrtmp[0] = addr[0];
 726                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 727                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 728                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 729                 addrtmp[1] = addr[4];
 730                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 731         }
 732
 733         if (dev->dev->id.revision >= 5) {
 734                 /* Receive match transmitter address mechanism */
 735                 b43_shm_write32(dev, B43_SHM_RCMTA,
 736                                 (index * 2) + 0, addrtmp[0]);
 737                 b43_shm_write16(dev, B43_SHM_RCMTA,
 738                                 (index * 2) + 1, addrtmp[1]);
 739         } else {
 740                 /* RXE (Receive Engine) and
 741                  * PSM (Programmable State Machine) mechanism
 742                  */
 743                 if (index < 8) {
 744                         /* TODO write to RCM 16, 19, 22 and 25 */
 745                 } else {
 746                         b43_shm_write32(dev, B43_SHM_SHARED,
 747                                         B43_SHM_SH_PSM + (index * 6) + 0,
 748                                         addrtmp[0]);
 749                         b43_shm_write16(dev, B43_SHM_SHARED,
 750                                         B43_SHM_SH_PSM + (index * 6) + 4,
 751                                         addrtmp[1]);
 752                 }
 753         }
 754 }
 755
 756 static void do_key_write(struct b43_wldev *dev,
 757                          u8 index, u8 algorithm,
 758                          const u8 * key, size_t key_len, const u8 * mac_addr)
 759 {
 760         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 761         u8 per_sta_keys_start = 8;
 762
 763         if (b43_new_kidx_api(dev))
 764                 per_sta_keys_start = 4;
 765
 766         B43_WARN_ON(index >= dev->max_nr_keys);
 767         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 768
 769         if (index >= per_sta_keys_start)
 770                 keymac_write(dev, index, NULL); /* First zero out mac. */
 771         if (key)
 772                 memcpy(buf, key, key_len);
 773         key_write(dev, index, algorithm, buf);
 774         if (index >= per_sta_keys_start)
 775                 keymac_write(dev, index, mac_addr);
 776
 777         dev->key[index].algorithm = algorithm;
 778 }
 779
 780 static int b43_key_write(struct b43_wldev *dev,
 781                          int index, u8 algorithm,
 782                          const u8 * key, size_t key_len,
 783                          const u8 * mac_addr,
 784                          struct ieee80211_key_conf *keyconf)
 785 {
 786         int i;
 787         int sta_keys_start;
 788
 789         if (key_len > B43_SEC_KEYSIZE)
 790                 return -EINVAL;
 791         for (i = 0; i < dev->max_nr_keys; i++) {
 792                 /* Check that we don't already have this key. */
 793                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 794         }
 795         if (index < 0) {
 796                 /* Either pairwise key or address is 00:00:00:00:00:00
 797                  * for transmit-only keys. Search the index. */
 798                 if (b43_new_kidx_api(dev))
 799                         sta_keys_start = 4;
 800                 else
 801                         sta_keys_start = 8;
 802                 for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
 803                         if (!dev->key[i].keyconf) {
 804                                 /* found empty */
 805                                 index = i;
 806                                 break;
 807                         }
 808                 }
 809                 if (index < 0) {
 810                         b43err(dev->wl, "Out of hardware key memory\n");
 811                         return -ENOSPC;
 812                 }
 813         } else
 814                 B43_WARN_ON(index > 3);
 815
 816         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
 817         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 818                 /* Default RX key */
 819                 B43_WARN_ON(mac_addr);
 820                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
 821         }
 822         keyconf->hw_key_idx = index;
 823         dev->key[index].keyconf = keyconf;
 824
 825         return 0;
 826 }
 827
 828 static int b43_key_clear(struct b43_wldev *dev, int index)
 829 {
 830         if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
 831                 return -EINVAL;
 832         do_key_write(dev, index, B43_SEC_ALGO_NONE,
 833                      NULL, B43_SEC_KEYSIZE, NULL);
 834         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 835                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
 836                              NULL, B43_SEC_KEYSIZE, NULL);
 837         }
 838         dev->key[index].keyconf = NULL;
 839
 840         return 0;
 841 }
 842
 843 static void b43_clear_keys(struct b43_wldev *dev)
 844 {
 845         int i;
 846
 847         for (i = 0; i < dev->max_nr_keys; i++)
 848                 b43_key_clear(dev, i);
 849 }
 850
 851 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 852 {
 853         u32 macctl;
 854         u16 ucstat;
 855         bool hwps;
 856         bool awake;
 857         int i;
 858
 859         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
 860                     (ps_flags & B43_PS_DISABLED));
 861         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
 862
 863         if (ps_flags & B43_PS_ENABLED) {
 864                 hwps = 1;
 865         } else if (ps_flags & B43_PS_DISABLED) {
 866                 hwps = 0;
 867         } else {
 868                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
 869                 //      and thus is not an AP and we are associated, set bit 25
 870         }
 871         if (ps_flags & B43_PS_AWAKE) {
 872                 awake = 1;
 873         } else if (ps_flags & B43_PS_ASLEEP) {
 874                 awake = 0;
 875         } else {
 876                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
 877                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
 878                 //      successful, set bit26
 879         }
 880
 881 /* FIXME: For now we force awake-on and hwps-off */
 882         hwps = 0;
 883         awake = 1;
 884
 885         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 886         if (hwps)
 887                 macctl |= B43_MACCTL_HWPS;
 888         else
 889                 macctl &= ~B43_MACCTL_HWPS;
 890         if (awake)
 891                 macctl |= B43_MACCTL_AWAKE;
 892         else
 893                 macctl &= ~B43_MACCTL_AWAKE;
 894         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 895         /* Commit write */
 896         b43_read32(dev, B43_MMIO_MACCTL);
 897         if (awake && dev->dev->id.revision >= 5) {
 898                 /* Wait for the microcode to wake up. */
 899                 for (i = 0; i < 100; i++) {
 900                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
 901                                                 B43_SHM_SH_UCODESTAT);
 902                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
 903                                 break;
 904                         udelay(10);
 905                 }
 906         }
 907 }
 908
 909 /* Turn the Analog ON/OFF */
 910 static void b43_switch_analog(struct b43_wldev *dev, int on)
 911 {
 912         b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 913 }
 914
 915 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 916 {
 917         u32 tmslow;
 918         u32 macctl;
 919
 920         flags |= B43_TMSLOW_PHYCLKEN;
 921         flags |= B43_TMSLOW_PHYRESET;
 922         ssb_device_enable(dev->dev, flags);
 923         msleep(2);              /* Wait for the PLL to turn on. */
 924
 925         /* Now take the PHY out of Reset again */
 926         tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
 927         tmslow |= SSB_TMSLOW_FGC;
 928         tmslow &= ~B43_TMSLOW_PHYRESET;
 929         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 930         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
 931         msleep(1);
 932         tmslow &= ~SSB_TMSLOW_FGC;
 933         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 934         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
 935         msleep(1);
 936
 937         /* Turn Analog ON */
 938         b43_switch_analog(dev, 1);
 939
 940         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 941         macctl &= ~B43_MACCTL_GMODE;
 942         if (flags & B43_TMSLOW_GMODE)
 943                 macctl |= B43_MACCTL_GMODE;
 944         macctl |= B43_MACCTL_IHR_ENABLED;
 945         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 946 }
 947
 948 static void handle_irq_transmit_status(struct b43_wldev *dev)
 949 {
 950         u32 v0, v1;
 951         u16 tmp;
 952         struct b43_txstatus stat;
 953
 954         while (1) {
 955                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
 956                 if (!(v0 & 0x00000001))
 957                         break;
 958                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
 959
 960                 stat.cookie = (v0 >> 16);
 961                 stat.seq = (v1 & 0x0000FFFF);
 962                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
 963                 tmp = (v0 & 0x0000FFFF);
 964                 stat.frame_count = ((tmp & 0xF000) >> 12);
 965                 stat.rts_count = ((tmp & 0x0F00) >> 8);
 966                 stat.supp_reason = ((tmp & 0x001C) >> 2);
 967                 stat.pm_indicated = !!(tmp & 0x0080);
 968                 stat.intermediate = !!(tmp & 0x0040);
 969                 stat.for_ampdu = !!(tmp & 0x0020);
 970                 stat.acked = !!(tmp & 0x0002);
 971
 972                 b43_handle_txstatus(dev, &stat);
 973         }
 974 }
 975
 976 static void drain_txstatus_queue(struct b43_wldev *dev)
 977 {
 978         u32 dummy;
 979
 980         if (dev->dev->id.revision < 5)
 981                 return;
 982         /* Read all entries from the microcode TXstatus FIFO
 983          * and throw them away.
 984          */
 985         while (1) {
 986                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
 987                 if (!(dummy & 0x00000001))
 988                         break;
 989                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
 990         }
 991 }
 992
 993 static u32 b43_jssi_read(struct b43_wldev *dev)
 994 {
 995         u32 val = 0;
 996
 997         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
 998         val <<= 16;
 999         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1000
1001         return val;
1002 }
1003
1004 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1005 {
1006         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1007         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1008 }
1009
1010 static void b43_generate_noise_sample(struct b43_wldev *dev)
1011 {
1012         b43_jssi_write(dev, 0x7F7F7F7F);
1013         b43_write32(dev, B43_MMIO_MACCMD,
1014                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1015         B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
1016 }
1017
1018 static void b43_calculate_link_quality(struct b43_wldev *dev)
1019 {
1020         /* Top half of Link Quality calculation. */
1021
1022         if (dev->noisecalc.calculation_running)
1023                 return;
1024         dev->noisecalc.channel_at_start = dev->phy.channel;
1025         dev->noisecalc.calculation_running = 1;
1026         dev->noisecalc.nr_samples = 0;
1027
1028         b43_generate_noise_sample(dev);
1029 }
1030
1031 static void handle_irq_noise(struct b43_wldev *dev)
1032 {
1033         struct b43_phy *phy = &dev->phy;
1034         u16 tmp;
1035         u8 noise[4];
1036         u8 i, j;
1037         s32 average;
1038
1039         /* Bottom half of Link Quality calculation. */
1040
1041         B43_WARN_ON(!dev->noisecalc.calculation_running);
1042         if (dev->noisecalc.channel_at_start != phy->channel)
1043                 goto drop_calculation;
1044         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1045         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1046             noise[2] == 0x7F || noise[3] == 0x7F)
1047                 goto generate_new;
1048
1049         /* Get the noise samples. */
1050         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1051         i = dev->noisecalc.nr_samples;
1052         noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1053         noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1054         noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1055         noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1056         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1057         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1058         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1059         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1060         dev->noisecalc.nr_samples++;
1061         if (dev->noisecalc.nr_samples == 8) {
1062                 /* Calculate the Link Quality by the noise samples. */
1063                 average = 0;
1064                 for (i = 0; i < 8; i++) {
1065                         for (j = 0; j < 4; j++)
1066                                 average += dev->noisecalc.samples[i][j];
1067                 }
1068                 average /= (8 * 4);
1069                 average *= 125;
1070                 average += 64;
1071                 average /= 128;
1072                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1073                 tmp = (tmp / 128) & 0x1F;
1074                 if (tmp >= 8)
1075                         average += 2;
1076                 else
1077                         average -= 25;
1078                 if (tmp == 8)
1079                         average -= 72;
1080                 else
1081                         average -= 48;
1082
1083                 dev->stats.link_noise = average;
1084               drop_calculation:
1085                 dev->noisecalc.calculation_running = 0;
1086                 return;
1087         }
1088       generate_new:
1089         b43_generate_noise_sample(dev);
1090 }
1091
1092 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1093 {
1094         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
1095                 ///TODO: PS TBTT
1096         } else {
1097                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1098                         b43_power_saving_ctl_bits(dev, 0);
1099         }
1100         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
1101                 dev->dfq_valid = 1;
1102 }
1103
1104 static void handle_irq_atim_end(struct b43_wldev *dev)
1105 {
1106         if (dev->dfq_valid) {
1107                 b43_write32(dev, B43_MMIO_MACCMD,
1108                             b43_read32(dev, B43_MMIO_MACCMD)
1109                             | B43_MACCMD_DFQ_VALID);
1110                 dev->dfq_valid = 0;
1111         }
1112 }
1113
1114 static void handle_irq_pmq(struct b43_wldev *dev)
1115 {
1116         u32 tmp;
1117
1118         //TODO: AP mode.
1119
1120         while (1) {
1121                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1122                 if (!(tmp & 0x00000008))
1123                         break;
1124         }
1125         /* 16bit write is odd, but correct. */
1126         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1127 }
1128
1129 static void b43_write_template_common(struct b43_wldev *dev,
1130                                       const u8 * data, u16 size,
1131                                       u16 ram_offset,
1132                                       u16 shm_size_offset, u8 rate)
1133 {
1134         u32 i, tmp;
1135         struct b43_plcp_hdr4 plcp;
1136
1137         plcp.data = 0;
1138         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1139         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1140         ram_offset += sizeof(u32);
1141         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1142          * So leave the first two bytes of the next write blank.
1143          */
1144         tmp = (u32) (data[0]) << 16;
1145         tmp |= (u32) (data[1]) << 24;
1146         b43_ram_write(dev, ram_offset, tmp);
1147         ram_offset += sizeof(u32);
1148         for (i = 2; i < size; i += sizeof(u32)) {
1149                 tmp = (u32) (data[i + 0]);
1150                 if (i + 1 < size)
1151                         tmp |= (u32) (data[i + 1]) << 8;
1152                 if (i + 2 < size)
1153                         tmp |= (u32) (data[i + 2]) << 16;
1154                 if (i + 3 < size)
1155                         tmp |= (u32) (data[i + 3]) << 24;
1156                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1157         }
1158         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1159                         size + sizeof(struct b43_plcp_hdr6));
1160 }
1161
1162 static void b43_write_beacon_template(struct b43_wldev *dev,
1163                                       u16 ram_offset,
1164                                       u16 shm_size_offset, u8 rate)
1165 {
1166         unsigned int i, len, variable_len;
1167         const struct ieee80211_mgmt *bcn;
1168         const u8 *ie;
1169         bool tim_found = 0;
1170
1171         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1172         len = min((size_t) dev->wl->current_beacon->len,
1173                   0x200 - sizeof(struct b43_plcp_hdr6));
1174
1175         b43_write_template_common(dev, (const u8 *)bcn,
1176                                   len, ram_offset, shm_size_offset, rate);
1177
1178         /* Find the position of the TIM and the DTIM_period value
1179          * and write them to SHM. */
1180         ie = bcn->u.beacon.variable;
1181         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1182         for (i = 0; i < variable_len - 2; ) {
1183                 uint8_t ie_id, ie_len;
1184
1185                 ie_id = ie[i];
1186                 ie_len = ie[i + 1];
1187                 if (ie_id == 5) {
1188                         u16 tim_position;
1189                         u16 dtim_period;
1190                         /* This is the TIM Information Element */
1191
1192                         /* Check whether the ie_len is in the beacon data range. */
1193                         if (variable_len < ie_len + 2 + i)
1194                                 break;
1195                         /* A valid TIM is at least 4 bytes long. */
1196                         if (ie_len < 4)
1197                                 break;
1198                         tim_found = 1;
1199
1200                         tim_position = sizeof(struct b43_plcp_hdr6);
1201                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1202                         tim_position += i;
1203
1204                         dtim_period = ie[i + 3];
1205
1206                         b43_shm_write16(dev, B43_SHM_SHARED,
1207                                         B43_SHM_SH_TIMBPOS, tim_position);
1208                         b43_shm_write16(dev, B43_SHM_SHARED,
1209                                         B43_SHM_SH_DTIMPER, dtim_period);
1210                         break;
1211                 }
1212                 i += ie_len + 2;
1213         }
1214         if (!tim_found) {
1215                 b43warn(dev->wl, "Did not find a valid TIM IE in "
1216                         "the beacon template packet. AP or IBSS operation "
1217                         "may be broken.\n");
1218         }
1219 }
1220
1221 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
1222                                       u16 shm_offset, u16 size, u8 rate)
1223 {
1224         struct b43_plcp_hdr4 plcp;
1225         u32 tmp;
1226         __le16 dur;
1227
1228         plcp.data = 0;
1229         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1230         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1231                                                dev->wl->vif, size,
1232                                                B43_RATE_TO_BASE100KBPS(rate));
1233         /* Write PLCP in two parts and timing for packet transfer */
1234         tmp = le32_to_cpu(plcp.data);
1235         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
1236         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
1237         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
1238 }
1239
1240 /* Instead of using custom probe response template, this function
1241  * just patches custom beacon template by:
1242  * 1) Changing packet type
1243  * 2) Patching duration field
1244  * 3) Stripping TIM
1245  */
1246 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
1247                                           u16 *dest_size, u8 rate)
1248 {
1249         const u8 *src_data;
1250         u8 *dest_data;
1251         u16 src_size, elem_size, src_pos, dest_pos;
1252         __le16 dur;
1253         struct ieee80211_hdr *hdr;
1254         size_t ie_start;
1255
1256         src_size = dev->wl->current_beacon->len;
1257         src_data = (const u8 *)dev->wl->current_beacon->data;
1258
1259         /* Get the start offset of the variable IEs in the packet. */
1260         ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1261         B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
1262
1263         if (B43_WARN_ON(src_size < ie_start))
1264                 return NULL;
1265
1266         dest_data = kmalloc(src_size, GFP_ATOMIC);
1267         if (unlikely(!dest_data))
1268                 return NULL;
1269
1270         /* Copy the static data and all Information Elements, except the TIM. */
1271         memcpy(dest_data, src_data, ie_start);
1272         src_pos = ie_start;
1273         dest_pos = ie_start;
1274         for ( ; src_pos < src_size - 2; src_pos += elem_size) {
1275                 elem_size = src_data[src_pos + 1] + 2;
1276                 if (src_data[src_pos] == 5) {
1277                         /* This is the TIM. */
1278                         continue;
1279                 }
1280                 memcpy(dest_data + dest_pos, src_data + src_pos,
1281                        elem_size);
1282                 dest_pos += elem_size;
1283         }
1284         *dest_size = dest_pos;
1285         hdr = (struct ieee80211_hdr *)dest_data;
1286
1287         /* Set the frame control. */
1288         hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1289                                          IEEE80211_STYPE_PROBE_RESP);
1290         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1291                                                dev->wl->vif, *dest_size,
1292                                                B43_RATE_TO_BASE100KBPS(rate));
1293         hdr->duration_id = dur;
1294
1295         return dest_data;
1296 }
1297
1298 static void b43_write_probe_resp_template(struct b43_wldev *dev,
1299                                           u16 ram_offset,
1300                                           u16 shm_size_offset, u8 rate)
1301 {
1302         const u8 *probe_resp_data;
1303         u16 size;
1304
1305         size = dev->wl->current_beacon->len;
1306         probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
1307         if (unlikely(!probe_resp_data))
1308                 return;
1309
1310         /* Looks like PLCP headers plus packet timings are stored for
1311          * all possible basic rates
1312          */
1313         b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB);
1314         b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB);
1315         b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB);
1316         b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB);
1317
1318         size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
1319         b43_write_template_common(dev, probe_resp_data,
1320                                   size, ram_offset, shm_size_offset, rate);
1321         kfree(probe_resp_data);
1322 }
1323
1324 /* Asynchronously update the packet templates in template RAM.
1325  * Locking: Requires wl->irq_lock to be locked. */
1326 static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon)
1327 {
1328         /* This is the top half of the ansynchronous beacon update.
1329          * The bottom half is the beacon IRQ.
1330          * Beacon update must be asynchronous to avoid sending an
1331          * invalid beacon. This can happen for example, if the firmware
1332          * transmits a beacon while we are updating it. */
1333
1334         if (wl->current_beacon)
1335                 dev_kfree_skb_any(wl->current_beacon);
1336         wl->current_beacon = beacon;
1337         wl->beacon0_uploaded = 0;
1338         wl->beacon1_uploaded = 0;
1339 }
1340
1341 static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
1342 {
1343         u32 tmp;
1344         u16 i, len;
1345
1346         len = min((u16) ssid_len, (u16) 0x100);
1347         for (i = 0; i < len; i += sizeof(u32)) {
1348                 tmp = (u32) (ssid[i + 0]);
1349                 if (i + 1 < len)
1350                         tmp |= (u32) (ssid[i + 1]) << 8;
1351                 if (i + 2 < len)
1352                         tmp |= (u32) (ssid[i + 2]) << 16;
1353                 if (i + 3 < len)
1354                         tmp |= (u32) (ssid[i + 3]) << 24;
1355                 b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp);
1356         }
1357         b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len);
1358 }
1359
1360 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1361 {
1362         b43_time_lock(dev);
1363         if (dev->dev->id.revision >= 3) {
1364                 b43_write32(dev, 0x188, (beacon_int << 16));
1365         } else {
1366                 b43_write16(dev, 0x606, (beacon_int >> 6));
1367                 b43_write16(dev, 0x610, beacon_int);
1368         }
1369         b43_time_unlock(dev);
1370 }
1371
1372 static void handle_irq_beacon(struct b43_wldev *dev)
1373 {
1374         struct b43_wl *wl = dev->wl;
1375         u32 cmd;
1376
1377         if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
1378                 return;
1379
1380         /* This is the bottom half of the asynchronous beacon update. */
1381
1382         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1383         if (!(cmd & B43_MACCMD_BEACON0_VALID)) {
1384                 if (!wl->beacon0_uploaded) {
1385                         b43_write_beacon_template(dev, 0x68, 0x18,
1386                                                   B43_CCK_RATE_1MB);
1387                         b43_write_probe_resp_template(dev, 0x268, 0x4A,
1388                                                       B43_CCK_RATE_11MB);
1389                         wl->beacon0_uploaded = 1;
1390                 }
1391                 cmd |= B43_MACCMD_BEACON0_VALID;
1392         }
1393         if (!(cmd & B43_MACCMD_BEACON1_VALID)) {
1394                 if (!wl->beacon1_uploaded) {
1395                         b43_write_beacon_template(dev, 0x468, 0x1A,
1396                                                   B43_CCK_RATE_1MB);
1397                         wl->beacon1_uploaded = 1;
1398                 }
1399                 cmd |= B43_MACCMD_BEACON1_VALID;
1400         }
1401         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1402 }
1403
1404 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1405 {
1406         //TODO
1407 }
1408
1409 /* Interrupt handler bottom-half */
1410 static void b43_interrupt_tasklet(struct b43_wldev *dev)
1411 {
1412         u32 reason;
1413         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1414         u32 merged_dma_reason = 0;
1415         int i;
1416         unsigned long flags;
1417
1418         spin_lock_irqsave(&dev->wl->irq_lock, flags);
1419
1420         B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
1421
1422         reason = dev->irq_reason;
1423         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1424                 dma_reason[i] = dev->dma_reason[i];
1425                 merged_dma_reason |= dma_reason[i];
1426         }
1427
1428         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1429                 b43err(dev->wl, "MAC transmission error\n");
1430
1431         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1432                 b43err(dev->wl, "PHY transmission error\n");
1433                 rmb();
1434                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1435                         atomic_set(&dev->phy.txerr_cnt,
1436                                    B43_PHY_TX_BADNESS_LIMIT);
1437                         b43err(dev->wl, "Too many PHY TX errors, "
1438                                         "restarting the controller\n");
1439                         b43_controller_restart(dev, "PHY TX errors");
1440                 }
1441         }
1442
1443         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1444                                           B43_DMAIRQ_NONFATALMASK))) {
1445                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1446                         b43err(dev->wl, "Fatal DMA error: "
1447                                "0x%08X, 0x%08X, 0x%08X, "
1448                                "0x%08X, 0x%08X, 0x%08X\n",
1449                                dma_reason[0], dma_reason[1],
1450                                dma_reason[2], dma_reason[3],
1451                                dma_reason[4], dma_reason[5]);
1452                         b43_controller_restart(dev, "DMA error");
1453                         mmiowb();
1454                         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1455                         return;
1456                 }
1457                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1458                         b43err(dev->wl, "DMA error: "
1459                                "0x%08X, 0x%08X, 0x%08X, "
1460                                "0x%08X, 0x%08X, 0x%08X\n",
1461                                dma_reason[0], dma_reason[1],
1462                                dma_reason[2], dma_reason[3],
1463                                dma_reason[4], dma_reason[5]);
1464                 }
1465         }
1466
1467         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1468                 handle_irq_ucode_debug(dev);
1469         if (reason & B43_IRQ_TBTT_INDI)
1470                 handle_irq_tbtt_indication(dev);
1471         if (reason & B43_IRQ_ATIM_END)
1472                 handle_irq_atim_end(dev);
1473         if (reason & B43_IRQ_BEACON)
1474                 handle_irq_beacon(dev);
1475         if (reason & B43_IRQ_PMQ)
1476                 handle_irq_pmq(dev);
1477         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1478                 ;/* TODO */
1479         if (reason & B43_IRQ_NOISESAMPLE_OK)
1480                 handle_irq_noise(dev);
1481
1482         /* Check the DMA reason registers for received data. */
1483         if (dma_reason[0] & B43_DMAIRQ_RX_DONE)
1484                 b43_dma_rx(dev->dma.rx_ring0);
1485         if (dma_reason[3] & B43_DMAIRQ_RX_DONE)
1486                 b43_dma_rx(dev->dma.rx_ring3);
1487         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1488         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1489         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1490         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1491
1492         if (reason & B43_IRQ_TX_OK)
1493                 handle_irq_transmit_status(dev);
1494
1495         b43_interrupt_enable(dev, dev->irq_savedstate);
1496         mmiowb();
1497         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1498 }
1499
1500 static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
1501 {
1502         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
1503
1504         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
1505         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
1506         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
1507         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
1508         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
1509         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
1510 }
1511
1512 /* Interrupt handler top-half */
1513 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
1514 {
1515         irqreturn_t ret = IRQ_NONE;
1516         struct b43_wldev *dev = dev_id;
1517         u32 reason;
1518
1519         if (!dev)
1520                 return IRQ_NONE;
1521
1522         spin_lock(&dev->wl->irq_lock);
1523
1524         if (b43_status(dev) < B43_STAT_STARTED)
1525                 goto out;
1526         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1527         if (reason == 0xffffffff)       /* shared IRQ */
1528                 goto out;
1529         ret = IRQ_HANDLED;
1530         reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1531         if (!reason)
1532                 goto out;
1533
1534         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1535             & 0x0001DC00;
1536         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1537             & 0x0000DC00;
1538         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
1539             & 0x0000DC00;
1540         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
1541             & 0x0001DC00;
1542         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
1543             & 0x0000DC00;
1544         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
1545             & 0x0000DC00;
1546
1547         b43_interrupt_ack(dev, reason);
1548         /* disable all IRQs. They are enabled again in the bottom half. */
1549         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
1550         /* save the reason code and call our bottom half. */
1551         dev->irq_reason = reason;
1552         tasklet_schedule(&dev->isr_tasklet);
1553       out:
1554         mmiowb();
1555         spin_unlock(&dev->wl->irq_lock);
1556
1557         return ret;
1558 }
1559
1560 static void b43_release_firmware(struct b43_wldev *dev)
1561 {
1562         release_firmware(dev->fw.ucode);
1563         dev->fw.ucode = NULL;
1564         release_firmware(dev->fw.pcm);
1565         dev->fw.pcm = NULL;
1566         release_firmware(dev->fw.initvals);
1567         dev->fw.initvals = NULL;
1568         release_firmware(dev->fw.initvals_band);
1569         dev->fw.initvals_band = NULL;
1570 }
1571
1572 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
1573 {
1574         const char *text;
1575
1576         text = "You must go to "
1577                "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
1578                "and download the latest firmware (version 4).\n";
1579         if (error)
1580                 b43err(wl, text);
1581         else
1582                 b43warn(wl, text);
1583 }
1584
1585 static int do_request_fw(struct b43_wldev *dev,
1586                          const char *name,
1587                          const struct firmware **fw)
1588 {
1589         char path[sizeof(modparam_fwpostfix) + 32];
1590         struct b43_fw_header *hdr;
1591         u32 size;
1592         int err;
1593
1594         if (!name)
1595                 return 0;
1596
1597         snprintf(path, ARRAY_SIZE(path),
1598                  "b43%s/%s.fw",
1599                  modparam_fwpostfix, name);
1600         err = request_firmware(fw, path, dev->dev->dev);
1601         if (err) {
1602                 b43err(dev->wl, "Firmware file \"%s\" not found "
1603                        "or load failed.\n", path);
1604                 return err;
1605         }
1606         if ((*fw)->size < sizeof(struct b43_fw_header))
1607                 goto err_format;
1608         hdr = (struct b43_fw_header *)((*fw)->data);
1609         switch (hdr->type) {
1610         case B43_FW_TYPE_UCODE:
1611         case B43_FW_TYPE_PCM:
1612                 size = be32_to_cpu(hdr->size);
1613                 if (size != (*fw)->size - sizeof(struct b43_fw_header))
1614                         goto err_format;
1615                 /* fallthrough */
1616         case B43_FW_TYPE_IV:
1617                 if (hdr->ver != 1)
1618                         goto err_format;
1619                 break;
1620         default:
1621                 goto err_format;
1622         }
1623
1624         return err;
1625
1626 err_format:
1627         b43err(dev->wl, "Firmware file \"%s\" format error.\n", path);
1628         return -EPROTO;
1629 }
1630
1631 static int b43_request_firmware(struct b43_wldev *dev)
1632 {
1633         struct b43_firmware *fw = &dev->fw;
1634         const u8 rev = dev->dev->id.revision;
1635         const char *filename;
1636         u32 tmshigh;
1637         int err;
1638
1639         tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
1640         if (!fw->ucode) {
1641                 if ((rev >= 5) && (rev <= 10))
1642                         filename = "ucode5";
1643                 else if ((rev >= 11) && (rev <= 12))
1644                         filename = "ucode11";
1645                 else if (rev >= 13)
1646                         filename = "ucode13";
1647                 else
1648                         goto err_no_ucode;
1649                 err = do_request_fw(dev, filename, &fw->ucode);
1650                 if (err)
1651                         goto err_load;
1652         }
1653         if (!fw->pcm) {
1654                 if ((rev >= 5) && (rev <= 10))
1655                         filename = "pcm5";
1656                 else if (rev >= 11)
1657                         filename = NULL;
1658                 else
1659                         goto err_no_pcm;
1660                 err = do_request_fw(dev, filename, &fw->pcm);
1661                 if (err)
1662                         goto err_load;
1663         }
1664         if (!fw->initvals) {
1665                 switch (dev->phy.type) {
1666                 case B43_PHYTYPE_A:
1667                         if ((rev >= 5) && (rev <= 10)) {
1668                                 if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1669                                         filename = "a0g1initvals5";
1670                                 else
1671                                         filename = "a0g0initvals5";
1672                         } else
1673                                 goto err_no_initvals;
1674                         break;
1675                 case B43_PHYTYPE_G:
1676                         if ((rev >= 5) && (rev <= 10))
1677                                 filename = "b0g0initvals5";
1678                         else if (rev >= 13)
1679                                 filename = "lp0initvals13";
1680                         else
1681                                 goto err_no_initvals;
1682                         break;
1683                 case B43_PHYTYPE_N:
1684                         if ((rev >= 11) && (rev <= 12))
1685                                 filename = "n0initvals11";
1686                         else
1687                                 goto err_no_initvals;
1688                         break;
1689                 default:
1690                         goto err_no_initvals;
1691                 }
1692                 err = do_request_fw(dev, filename, &fw->initvals);
1693                 if (err)
1694                         goto err_load;
1695         }
1696         if (!fw->initvals_band) {
1697                 switch (dev->phy.type) {
1698                 case B43_PHYTYPE_A:
1699                         if ((rev >= 5) && (rev <= 10)) {
1700                                 if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1701                                         filename = "a0g1bsinitvals5";
1702                                 else
1703                                         filename = "a0g0bsinitvals5";
1704                         } else if (rev >= 11)
1705                                 filename = NULL;
1706                         else
1707                                 goto err_no_initvals;
1708                         break;
1709                 case B43_PHYTYPE_G:
1710                         if ((rev >= 5) && (rev <= 10))
1711                                 filename = "b0g0bsinitvals5";
1712                         else if (rev >= 11)
1713                                 filename = NULL;
1714                         else
1715                                 goto err_no_initvals;
1716                         break;
1717                 case B43_PHYTYPE_N:
1718                         if ((rev >= 11) && (rev <= 12))
1719                                 filename = "n0bsinitvals11";
1720                         else
1721                                 goto err_no_initvals;
1722                         break;
1723                 default:
1724                         goto err_no_initvals;
1725                 }
1726                 err = do_request_fw(dev, filename, &fw->initvals_band);
1727                 if (err)
1728                         goto err_load;
1729         }
1730
1731         return 0;
1732
1733 err_load:
1734         b43_print_fw_helptext(dev->wl, 1);
1735         goto error;
1736
1737 err_no_ucode:
1738         err = -ENODEV;
1739         b43err(dev->wl, "No microcode available for core rev %u\n", rev);
1740         goto error;
1741
1742 err_no_pcm:
1743         err = -ENODEV;
1744         b43err(dev->wl, "No PCM available for core rev %u\n", rev);
1745         goto error;
1746
1747 err_no_initvals:
1748         err = -ENODEV;
1749         b43err(dev->wl, "No Initial Values firmware file for PHY %u, "
1750                "core rev %u\n", dev->phy.type, rev);
1751         goto error;
1752
1753 error:
1754         b43_release_firmware(dev);
1755         return err;
1756 }
1757
1758 static int b43_upload_microcode(struct b43_wldev *dev)
1759 {
1760         const size_t hdr_len = sizeof(struct b43_fw_header);
1761         const __be32 *data;
1762         unsigned int i, len;
1763         u16 fwrev, fwpatch, fwdate, fwtime;
1764         u32 tmp;
1765         int err = 0;
1766
1767         /* Upload Microcode. */
1768         data = (__be32 *) (dev->fw.ucode->data + hdr_len);
1769         len = (dev->fw.ucode->size - hdr_len) / sizeof(__be32);
1770         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
1771         for (i = 0; i < len; i++) {
1772                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
1773                 udelay(10);
1774         }
1775
1776         if (dev->fw.pcm) {
1777                 /* Upload PCM data. */
1778                 data = (__be32 *) (dev->fw.pcm->data + hdr_len);
1779                 len = (dev->fw.pcm->size - hdr_len) / sizeof(__be32);
1780                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
1781                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
1782                 /* No need for autoinc bit in SHM_HW */
1783                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
1784                 for (i = 0; i < len; i++) {
1785                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
1786                         udelay(10);
1787                 }
1788         }
1789
1790         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
1791         b43_write32(dev, B43_MMIO_MACCTL,
1792                     B43_MACCTL_PSM_RUN |
1793                     B43_MACCTL_IHR_ENABLED | B43_MACCTL_INFRA);
1794
1795         /* Wait for the microcode to load and respond */
1796         i = 0;
1797         while (1) {
1798                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1799                 if (tmp == B43_IRQ_MAC_SUSPENDED)
1800                         break;
1801                 i++;
1802                 if (i >= 50) {
1803                         b43err(dev->wl, "Microcode not responding\n");
1804                         b43_print_fw_helptext(dev->wl, 1);
1805                         err = -ENODEV;
1806                         goto out;
1807                 }
1808                 udelay(10);
1809         }
1810         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
1811
1812         /* Get and check the revisions. */
1813         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
1814         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
1815         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
1816         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
1817
1818         if (fwrev <= 0x128) {
1819                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
1820                        "binary drivers older than version 4.x is unsupported. "
1821                        "You must upgrade your firmware files.\n");
1822                 b43_print_fw_helptext(dev->wl, 1);
1823                 b43_write32(dev, B43_MMIO_MACCTL, 0);
1824                 err = -EOPNOTSUPP;
1825                 goto out;
1826         }
1827         b43dbg(dev->wl, "Loading firmware version %u.%u "
1828                "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
1829                fwrev, fwpatch,
1830                (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
1831                (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
1832
1833         dev->fw.rev = fwrev;
1834         dev->fw.patch = fwpatch;
1835
1836         if (b43_is_old_txhdr_format(dev)) {
1837                 b43warn(dev->wl, "You are using an old firmware image. "
1838                         "Support for old firmware will be removed in July 2008.\n");
1839                 b43_print_fw_helptext(dev->wl, 0);
1840         }
1841
1842 out:
1843         return err;
1844 }
1845
1846 static int b43_write_initvals(struct b43_wldev *dev,
1847                               const struct b43_iv *ivals,
1848                               size_t count,
1849                               size_t array_size)
1850 {
1851         const struct b43_iv *iv;
1852         u16 offset;
1853         size_t i;
1854         bool bit32;
1855
1856         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
1857         iv = ivals;
1858         for (i = 0; i < count; i++) {
1859                 if (array_size < sizeof(iv->offset_size))
1860                         goto err_format;
1861                 array_size -= sizeof(iv->offset_size);
1862                 offset = be16_to_cpu(iv->offset_size);
1863                 bit32 = !!(offset & B43_IV_32BIT);
1864                 offset &= B43_IV_OFFSET_MASK;
1865                 if (offset >= 0x1000)
1866                         goto err_format;
1867                 if (bit32) {
1868                         u32 value;
1869
1870                         if (array_size < sizeof(iv->data.d32))
1871                                 goto err_format;
1872                         array_size -= sizeof(iv->data.d32);
1873
1874                         value = be32_to_cpu(get_unaligned(&iv->data.d32));
1875                         b43_write32(dev, offset, value);
1876
1877                         iv = (const struct b43_iv *)((const uint8_t *)iv +
1878                                                         sizeof(__be16) +
1879                                                         sizeof(__be32));
1880                 } else {
1881                         u16 value;
1882
1883                         if (array_size < sizeof(iv->data.d16))
1884                                 goto err_format;
1885                         array_size -= sizeof(iv->data.d16);
1886
1887                         value = be16_to_cpu(iv->data.d16);
1888                         b43_write16(dev, offset, value);
1889
1890                         iv = (const struct b43_iv *)((const uint8_t *)iv +
1891                                                         sizeof(__be16) +
1892                                                         sizeof(__be16));
1893                 }
1894         }
1895         if (array_size)
1896                 goto err_format;
1897
1898         return 0;
1899
1900 err_format:
1901         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
1902         b43_print_fw_helptext(dev->wl, 1);
1903
1904         return -EPROTO;
1905 }
1906
1907 static int b43_upload_initvals(struct b43_wldev *dev)
1908 {
1909         const size_t hdr_len = sizeof(struct b43_fw_header);
1910         const struct b43_fw_header *hdr;
1911         struct b43_firmware *fw = &dev->fw;
1912         const struct b43_iv *ivals;
1913         size_t count;
1914         int err;
1915
1916         hdr = (const struct b43_fw_header *)(fw->initvals->data);
1917         ivals = (const struct b43_iv *)(fw->initvals->data + hdr_len);
1918         count = be32_to_cpu(hdr->size);
1919         err = b43_write_initvals(dev, ivals, count,
1920                                  fw->initvals->size - hdr_len);
1921         if (err)
1922                 goto out;
1923         if (fw->initvals_band) {
1924                 hdr = (const struct b43_fw_header *)(fw->initvals_band->data);
1925                 ivals = (const struct b43_iv *)(fw->initvals_band->data + hdr_len);
1926                 count = be32_to_cpu(hdr->size);
1927                 err = b43_write_initvals(dev, ivals, count,
1928                                          fw->initvals_band->size - hdr_len);
1929                 if (err)
1930                         goto out;
1931         }
1932 out:
1933
1934         return err;
1935 }
1936
1937 /* Initialize the GPIOs
1938  * http://bcm-specs.sipsolutions.net/GPIO
1939  */
1940 static int b43_gpio_init(struct b43_wldev *dev)
1941 {
1942         struct ssb_bus *bus = dev->dev->bus;
1943         struct ssb_device *gpiodev, *pcidev = NULL;
1944         u32 mask, set;
1945
1946         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
1947                     & ~B43_MACCTL_GPOUTSMSK);
1948
1949         b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
1950                     | 0x000F);
1951
1952         mask = 0x0000001F;
1953         set = 0x0000000F;
1954         if (dev->dev->bus->chip_id == 0x4301) {
1955                 mask |= 0x0060;
1956                 set |= 0x0060;
1957         }
1958         if (0 /* FIXME: conditional unknown */ ) {
1959                 b43_write16(dev, B43_MMIO_GPIO_MASK,
1960                             b43_read16(dev, B43_MMIO_GPIO_MASK)
1961                             | 0x0100);
1962                 mask |= 0x0180;
1963                 set |= 0x0180;
1964         }
1965         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
1966                 b43_write16(dev, B43_MMIO_GPIO_MASK,
1967                             b43_read16(dev, B43_MMIO_GPIO_MASK)
1968                             | 0x0200);
1969                 mask |= 0x0200;
1970                 set |= 0x0200;
1971         }
1972         if (dev->dev->id.revision >= 2)
1973                 mask |= 0x0010; /* FIXME: This is redundant. */
1974
1975 #ifdef CONFIG_SSB_DRIVER_PCICORE
1976         pcidev = bus->pcicore.dev;
1977 #endif
1978         gpiodev = bus->chipco.dev ? : pcidev;
1979         if (!gpiodev)
1980                 return 0;
1981         ssb_write32(gpiodev, B43_GPIO_CONTROL,
1982                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
1983                      & mask) | set);
1984
1985         return 0;
1986 }
1987
1988 /* Turn off all GPIO stuff. Call this on module unload, for example. */
1989 static void b43_gpio_cleanup(struct b43_wldev *dev)
1990 {
1991         struct ssb_bus *bus = dev->dev->bus;
1992         struct ssb_device *gpiodev, *pcidev = NULL;
1993
1994 #ifdef CONFIG_SSB_DRIVER_PCICORE
1995         pcidev = bus->pcicore.dev;
1996 #endif
1997         gpiodev = bus->chipco.dev ? : pcidev;
1998         if (!gpiodev)
1999                 return;
2000         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2001 }
2002
2003 /* http://bcm-specs.sipsolutions.net/EnableMac */
2004 void b43_mac_enable(struct b43_wldev *dev)
2005 {
2006         dev->mac_suspended--;
2007         B43_WARN_ON(dev->mac_suspended < 0);
2008         B43_WARN_ON(irqs_disabled());
2009         if (dev->mac_suspended == 0) {
2010                 b43_write32(dev, B43_MMIO_MACCTL,
2011                             b43_read32(dev, B43_MMIO_MACCTL)
2012                             | B43_MACCTL_ENABLED);
2013                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2014                             B43_IRQ_MAC_SUSPENDED);
2015                 /* Commit writes */
2016                 b43_read32(dev, B43_MMIO_MACCTL);
2017                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2018                 b43_power_saving_ctl_bits(dev, 0);
2019
2020                 /* Re-enable IRQs. */
2021                 spin_lock_irq(&dev->wl->irq_lock);
2022                 b43_interrupt_enable(dev, dev->irq_savedstate);
2023                 spin_unlock_irq(&dev->wl->irq_lock);
2024         }
2025 }
2026
2027 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2028 void b43_mac_suspend(struct b43_wldev *dev)
2029 {
2030         int i;
2031         u32 tmp;
2032
2033         might_sleep();
2034         B43_WARN_ON(irqs_disabled());
2035         B43_WARN_ON(dev->mac_suspended < 0);
2036
2037         if (dev->mac_suspended == 0) {
2038                 /* Mask IRQs before suspending MAC. Otherwise
2039                  * the MAC stays busy and won't suspend. */
2040                 spin_lock_irq(&dev->wl->irq_lock);
2041                 tmp = b43_interrupt_disable(dev, B43_IRQ_ALL);
2042                 spin_unlock_irq(&dev->wl->irq_lock);
2043                 b43_synchronize_irq(dev);
2044                 dev->irq_savedstate = tmp;
2045
2046                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2047                 b43_write32(dev, B43_MMIO_MACCTL,
2048                             b43_read32(dev, B43_MMIO_MACCTL)
2049                             & ~B43_MACCTL_ENABLED);
2050                 /* force pci to flush the write */
2051                 b43_read32(dev, B43_MMIO_MACCTL);
2052                 for (i = 40; i; i--) {
2053                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2054                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2055                                 goto out;
2056                         msleep(1);
2057                 }
2058                 b43err(dev->wl, "MAC suspend failed\n");
2059         }
2060 out:
2061         dev->mac_suspended++;
2062 }
2063
2064 static void b43_adjust_opmode(struct b43_wldev *dev)
2065 {
2066         struct b43_wl *wl = dev->wl;
2067         u32 ctl;
2068         u16 cfp_pretbtt;
2069
2070         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2071         /* Reset status to STA infrastructure mode. */
2072         ctl &= ~B43_MACCTL_AP;
2073         ctl &= ~B43_MACCTL_KEEP_CTL;
2074         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2075         ctl &= ~B43_MACCTL_KEEP_BAD;
2076         ctl &= ~B43_MACCTL_PROMISC;
2077         ctl &= ~B43_MACCTL_BEACPROMISC;
2078         ctl |= B43_MACCTL_INFRA;
2079
2080         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2081                 ctl |= B43_MACCTL_AP;
2082         else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
2083                 ctl &= ~B43_MACCTL_INFRA;
2084
2085         if (wl->filter_flags & FIF_CONTROL)
2086                 ctl |= B43_MACCTL_KEEP_CTL;
2087         if (wl->filter_flags & FIF_FCSFAIL)
2088                 ctl |= B43_MACCTL_KEEP_BAD;
2089         if (wl->filter_flags & FIF_PLCPFAIL)
2090                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2091         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2092                 ctl |= B43_MACCTL_PROMISC;
2093         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2094                 ctl |= B43_MACCTL_BEACPROMISC;
2095
2096         /* Workaround: On old hardware the HW-MAC-address-filter
2097          * doesn't work properly, so always run promisc in filter
2098          * it in software. */
2099         if (dev->dev->id.revision <= 4)
2100                 ctl |= B43_MACCTL_PROMISC;
2101
2102         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2103
2104         cfp_pretbtt = 2;
2105         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2106                 if (dev->dev->bus->chip_id == 0x4306 &&
2107                     dev->dev->bus->chip_rev == 3)
2108                         cfp_pretbtt = 100;
2109                 else
2110                         cfp_pretbtt = 50;
2111         }
2112         b43_write16(dev, 0x612, cfp_pretbtt);
2113 }
2114
2115 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2116 {
2117         u16 offset;
2118
2119         if (is_ofdm) {
2120                 offset = 0x480;
2121                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2122         } else {
2123                 offset = 0x4C0;
2124                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2125         }
2126         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2127                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2128 }
2129
2130 static void b43_rate_memory_init(struct b43_wldev *dev)
2131 {
2132         switch (dev->phy.type) {
2133         case B43_PHYTYPE_A:
2134         case B43_PHYTYPE_G:
2135         case B43_PHYTYPE_N:
2136                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2137                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2138                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2139                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2140                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2141                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2142                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2143                 if (dev->phy.type == B43_PHYTYPE_A)
2144                         break;
2145                 /* fallthrough */
2146         case B43_PHYTYPE_B:
2147                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2148                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2149                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2150                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2151                 break;
2152         default:
2153                 B43_WARN_ON(1);
2154         }
2155 }
2156
2157 /* Set the TX-Antenna for management frames sent by firmware. */
2158 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
2159 {
2160         u16 ant = 0;
2161         u16 tmp;
2162
2163         switch (antenna) {
2164         case B43_ANTENNA0:
2165                 ant |= B43_TXH_PHY_ANT0;
2166                 break;
2167         case B43_ANTENNA1:
2168                 ant |= B43_TXH_PHY_ANT1;
2169                 break;
2170         case B43_ANTENNA2:
2171                 ant |= B43_TXH_PHY_ANT2;
2172                 break;
2173         case B43_ANTENNA3:
2174                 ant |= B43_TXH_PHY_ANT3;
2175                 break;
2176         case B43_ANTENNA_AUTO:
2177                 ant |= B43_TXH_PHY_ANT01AUTO;
2178                 break;
2179         default:
2180                 B43_WARN_ON(1);
2181         }
2182
2183         /* FIXME We also need to set the other flags of the PHY control field somewhere. */
2184
2185         /* For Beacons */
2186         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
2187         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2188         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, tmp);
2189         /* For ACK/CTS */
2190         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
2191         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2192         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
2193         /* For Probe Resposes */
2194         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
2195         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2196         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
2197 }
2198
2199 /* This is the opposite of b43_chip_init() */
2200 static void b43_chip_exit(struct b43_wldev *dev)
2201 {
2202         b43_radio_turn_off(dev, 1);
2203         b43_gpio_cleanup(dev);
2204         /* firmware is released later */
2205 }
2206
2207 /* Initialize the chip
2208  * http://bcm-specs.sipsolutions.net/ChipInit
2209  */
2210 static int b43_chip_init(struct b43_wldev *dev)
2211 {
2212         struct b43_phy *phy = &dev->phy;
2213         int err, tmp;
2214         u32 value32;
2215         u16 value16;
2216
2217         b43_write32(dev, B43_MMIO_MACCTL,
2218                     B43_MACCTL_PSM_JMP0 | B43_MACCTL_IHR_ENABLED);
2219
2220         err = b43_request_firmware(dev);
2221         if (err)
2222                 goto out;
2223         err = b43_upload_microcode(dev);
2224         if (err)
2225                 goto out;       /* firmware is released later */
2226
2227         err = b43_gpio_init(dev);
2228         if (err)
2229                 goto out;       /* firmware is released later */
2230
2231         err = b43_upload_initvals(dev);
2232         if (err)
2233                 goto err_gpio_clean;
2234         b43_radio_turn_on(dev);
2235
2236         b43_write16(dev, 0x03E6, 0x0000);
2237         err = b43_phy_init(dev);
2238         if (err)
2239                 goto err_radio_off;
2240
2241         /* Select initial Interference Mitigation. */
2242         tmp = phy->interfmode;
2243         phy->interfmode = B43_INTERFMODE_NONE;
2244         b43_radio_set_interference_mitigation(dev, tmp);
2245
2246         b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
2247         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
2248
2249         if (phy->type == B43_PHYTYPE_B) {
2250                 value16 = b43_read16(dev, 0x005E);
2251                 value16 |= 0x0004;
2252                 b43_write16(dev, 0x005E, value16);
2253         }
2254         b43_write32(dev, 0x0100, 0x01000000);
2255         if (dev->dev->id.revision < 5)
2256                 b43_write32(dev, 0x010C, 0x01000000);
2257
2258         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2259                     & ~B43_MACCTL_INFRA);
2260         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2261                     | B43_MACCTL_INFRA);
2262
2263         /* Probe Response Timeout value */
2264         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
2265         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
2266
2267         /* Initially set the wireless operation mode. */
2268         b43_adjust_opmode(dev);
2269
2270         if (dev->dev->id.revision < 3) {
2271                 b43_write16(dev, 0x060E, 0x0000);
2272                 b43_write16(dev, 0x0610, 0x8000);
2273                 b43_write16(dev, 0x0604, 0x0000);
2274                 b43_write16(dev, 0x0606, 0x0200);
2275         } else {
2276                 b43_write32(dev, 0x0188, 0x80000000);
2277                 b43_write32(dev, 0x018C, 0x02000000);
2278         }
2279         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
2280         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
2281         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
2282         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
2283         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
2284         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
2285         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
2286
2287         value32 = ssb_read32(dev->dev, SSB_TMSLOW);
2288         value32 |= 0x00100000;
2289         ssb_write32(dev->dev, SSB_TMSLOW, value32);
2290
2291         b43_write16(dev, B43_MMIO_POWERUP_DELAY,
2292                     dev->dev->bus->chipco.fast_pwrup_delay);
2293
2294         err = 0;
2295         b43dbg(dev->wl, "Chip initialized\n");
2296 out:
2297         return err;
2298
2299 err_radio_off:
2300         b43_radio_turn_off(dev, 1);
2301 err_gpio_clean:
2302         b43_gpio_cleanup(dev);
2303         return err;
2304 }
2305
2306 static void b43_periodic_every120sec(struct b43_wldev *dev)
2307 {
2308         struct b43_phy *phy = &dev->phy;
2309
2310         if (phy->type != B43_PHYTYPE_G || phy->rev < 2)
2311                 return;
2312
2313         b43_mac_suspend(dev);
2314         b43_lo_g_measure(dev);
2315         b43_mac_enable(dev);
2316         if (b43_has_hardware_pctl(phy))
2317                 b43_lo_g_ctl_mark_all_unused(dev);
2318 }
2319
2320 static void b43_periodic_every60sec(struct b43_wldev *dev)
2321 {
2322         struct b43_phy *phy = &dev->phy;
2323
2324         if (phy->type != B43_PHYTYPE_G)
2325                 return;
2326         if (!b43_has_hardware_pctl(phy))
2327                 b43_lo_g_ctl_mark_all_unused(dev);
2328         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
2329                 b43_mac_suspend(dev);
2330                 b43_calc_nrssi_slope(dev);
2331                 if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
2332                         u8 old_chan = phy->channel;
2333
2334                         /* VCO Calibration */
2335                         if (old_chan >= 8)
2336                                 b43_radio_selectchannel(dev, 1, 0);
2337                         else
2338                                 b43_radio_selectchannel(dev, 13, 0);
2339                         b43_radio_selectchannel(dev, old_chan, 0);
2340                 }
2341                 b43_mac_enable(dev);
2342         }
2343 }
2344
2345 static void b43_periodic_every30sec(struct b43_wldev *dev)
2346 {
2347         /* Update device statistics. */
2348         b43_calculate_link_quality(dev);
2349 }
2350
2351 static void b43_periodic_every15sec(struct b43_wldev *dev)
2352 {
2353         struct b43_phy *phy = &dev->phy;
2354
2355         if (phy->type == B43_PHYTYPE_G) {
2356                 //TODO: update_aci_moving_average
2357                 if (phy->aci_enable && phy->aci_wlan_automatic) {
2358                         b43_mac_suspend(dev);
2359                         if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
2360                                 if (0 /*TODO: bunch of conditions */ ) {
2361                                         b43_radio_set_interference_mitigation
2362                                             (dev, B43_INTERFMODE_MANUALWLAN);
2363                                 }
2364                         } else if (1 /*TODO*/) {
2365                                 /*
2366                                    if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
2367                                    b43_radio_set_interference_mitigation(dev,
2368                                    B43_INTERFMODE_NONE);
2369                                    }
2370                                  */
2371                         }
2372                         b43_mac_enable(dev);
2373                 } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
2374                            phy->rev == 1) {
2375                         //TODO: implement rev1 workaround
2376                 }
2377         }
2378         b43_phy_xmitpower(dev); //FIXME: unless scanning?
2379         //TODO for APHY (temperature?)
2380
2381         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
2382         wmb();
2383 }
2384
2385 static void do_periodic_work(struct b43_wldev *dev)
2386 {
2387         unsigned int state;
2388
2389         state = dev->periodic_state;
2390         if (state % 8 == 0)
2391                 b43_periodic_every120sec(dev);
2392         if (state % 4 == 0)
2393                 b43_periodic_every60sec(dev);
2394         if (state % 2 == 0)
2395                 b43_periodic_every30sec(dev);
2396         b43_periodic_every15sec(dev);
2397 }
2398
2399 /* Periodic work locking policy:
2400  *      The whole periodic work handler is protected by
2401  *      wl->mutex. If another lock is needed somewhere in the
2402  *      pwork callchain, it's aquired in-place, where it's needed.
2403  */
2404 static void b43_periodic_work_handler(struct work_struct *work)
2405 {
2406         struct b43_wldev *dev = container_of(work, struct b43_wldev,
2407                                              periodic_work.work);
2408         struct b43_wl *wl = dev->wl;
2409         unsigned long delay;
2410
2411         mutex_lock(&wl->mutex);
2412
2413         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
2414                 goto out;
2415         if (b43_debug(dev, B43_DBG_PWORK_STOP))
2416                 goto out_requeue;
2417
2418         do_periodic_work(dev);
2419
2420         dev->periodic_state++;
2421 out_requeue:
2422         if (b43_debug(dev, B43_DBG_PWORK_FAST))
2423                 delay = msecs_to_jiffies(50);
2424         else
2425                 delay = round_jiffies_relative(HZ * 15);
2426         queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
2427 out:
2428         mutex_unlock(&wl->mutex);
2429 }
2430
2431 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
2432 {
2433         struct delayed_work *work = &dev->periodic_work;
2434
2435         dev->periodic_state = 0;
2436         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
2437         queue_delayed_work(dev->wl->hw->workqueue, work, 0);
2438 }
2439
2440 /* Check if communication with the device works correctly. */
2441 static int b43_validate_chipaccess(struct b43_wldev *dev)
2442 {
2443         u32 v, backup;
2444
2445         backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
2446
2447         /* Check for read/write and endianness problems. */
2448         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
2449         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
2450                 goto error;
2451         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
2452         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
2453                 goto error;
2454
2455         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
2456
2457         if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
2458                 /* The 32bit register shadows the two 16bit registers
2459                  * with update sideeffects. Validate this. */
2460                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
2461                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
2462                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
2463                         goto error;
2464                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
2465                         goto error;
2466         }
2467         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
2468
2469         v = b43_read32(dev, B43_MMIO_MACCTL);
2470         v |= B43_MACCTL_GMODE;
2471         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
2472                 goto error;
2473
2474         return 0;
2475 error:
2476         b43err(dev->wl, "Failed to validate the chipaccess\n");
2477         return -ENODEV;
2478 }
2479
2480 static void b43_security_init(struct b43_wldev *dev)
2481 {
2482         dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
2483         B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
2484         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
2485         /* KTP is a word address, but we address SHM bytewise.
2486          * So multiply by two.
2487          */
2488         dev->ktp *= 2;
2489         if (dev->dev->id.revision >= 5) {
2490                 /* Number of RCMTA address slots */
2491                 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
2492         }
2493         b43_clear_keys(dev);
2494 }
2495
2496 static int b43_rng_read(struct hwrng *rng, u32 * data)
2497 {
2498         struct b43_wl *wl = (struct b43_wl *)rng->priv;
2499         unsigned long flags;
2500
2501         /* Don't take wl->mutex here, as it could deadlock with
2502          * hwrng internal locking. It's not needed to take
2503          * wl->mutex here, anyway. */
2504
2505         spin_lock_irqsave(&wl->irq_lock, flags);
2506         *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
2507         spin_unlock_irqrestore(&wl->irq_lock, flags);
2508
2509         return (sizeof(u16));
2510 }
2511
2512 static void b43_rng_exit(struct b43_wl *wl)
2513 {
2514         if (wl->rng_initialized)
2515                 hwrng_unregister(&wl->rng);
2516 }
2517
2518 static int b43_rng_init(struct b43_wl *wl)
2519 {
2520         int err;
2521
2522         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
2523                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
2524         wl->rng.name = wl->rng_name;
2525         wl->rng.data_read = b43_rng_read;
2526         wl->rng.priv = (unsigned long)wl;
2527         wl->rng_initialized = 1;
2528         err = hwrng_register(&wl->rng);
2529         if (err) {
2530                 wl->rng_initialized = 0;
2531                 b43err(wl, "Failed to register the random "
2532                        "number generator (%d)\n", err);
2533         }
2534
2535         return err;
2536 }
2537
2538 static int b43_op_tx(struct ieee80211_hw *hw,
2539                      struct sk_buff *skb,
2540                      struct ieee80211_tx_control *ctl)
2541 {
2542         struct b43_wl *wl = hw_to_b43_wl(hw);
2543         struct b43_wldev *dev = wl->current_dev;
2544         int err = -ENODEV;
2545
2546         if (unlikely(!dev))
2547                 goto out;
2548         if (unlikely(b43_status(dev) < B43_STAT_STARTED))
2549                 goto out;
2550         /* DMA-TX is done without a global lock. */
2551         err = b43_dma_tx(dev, skb, ctl);
2552 out:
2553         if (unlikely(err))
2554                 return NETDEV_TX_BUSY;
2555         return NETDEV_TX_OK;
2556 }
2557
2558 static int b43_op_conf_tx(struct ieee80211_hw *hw,
2559                           int queue,
2560                           const struct ieee80211_tx_queue_params *params)
2561 {
2562         return 0;
2563 }
2564
2565 static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
2566                                struct ieee80211_tx_queue_stats *stats)
2567 {
2568         struct b43_wl *wl = hw_to_b43_wl(hw);
2569         struct b43_wldev *dev = wl->current_dev;
2570         unsigned long flags;
2571         int err = -ENODEV;
2572
2573         if (!dev)
2574                 goto out;
2575         spin_lock_irqsave(&wl->irq_lock, flags);
2576         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
2577                 b43_dma_get_tx_stats(dev, stats);
2578                 err = 0;
2579         }
2580         spin_unlock_irqrestore(&wl->irq_lock, flags);
2581 out:
2582         return err;
2583 }
2584
2585 static int b43_op_get_stats(struct ieee80211_hw *hw,
2586                             struct ieee80211_low_level_stats *stats)
2587 {
2588         struct b43_wl *wl = hw_to_b43_wl(hw);
2589         unsigned long flags;
2590
2591         spin_lock_irqsave(&wl->irq_lock, flags);
2592         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
2593         spin_unlock_irqrestore(&wl->irq_lock, flags);
2594
2595         return 0;
2596 }
2597
2598 static const char *phymode_to_string(unsigned int phymode)
2599 {
2600         switch (phymode) {
2601         case B43_PHYMODE_A:
2602                 return "A";
2603         case B43_PHYMODE_B:
2604                 return "B";
2605         case B43_PHYMODE_G:
2606                 return "G";
2607         default:
2608                 B43_WARN_ON(1);
2609         }
2610         return "";
2611 }
2612
2613 static int find_wldev_for_phymode(struct b43_wl *wl,
2614                                   unsigned int phymode,
2615                                   struct b43_wldev **dev, bool * gmode)
2616 {
2617         struct b43_wldev *d;
2618
2619         list_for_each_entry(d, &wl->devlist, list) {
2620                 if (d->phy.possible_phymodes & phymode) {
2621                         /* Ok, this device supports the PHY-mode.
2622                          * Now figure out how the gmode bit has to be
2623                          * set to support it. */
2624                         if (phymode == B43_PHYMODE_A)
2625                                 *gmode = 0;
2626                         else
2627                                 *gmode = 1;
2628                         *dev = d;
2629
2630                         return 0;
2631                 }
2632         }
2633
2634         return -ESRCH;
2635 }
2636
2637 static void b43_put_phy_into_reset(struct b43_wldev *dev)
2638 {
2639         struct ssb_device *sdev = dev->dev;
2640         u32 tmslow;
2641
2642         tmslow = ssb_read32(sdev, SSB_TMSLOW);
2643         tmslow &= ~B43_TMSLOW_GMODE;
2644         tmslow |= B43_TMSLOW_PHYRESET;
2645         tmslow |= SSB_TMSLOW_FGC;
2646         ssb_write32(sdev, SSB_TMSLOW, tmslow);
2647         msleep(1);
2648
2649         tmslow = ssb_read32(sdev, SSB_TMSLOW);
2650         tmslow &= ~SSB_TMSLOW_FGC;
2651         tmslow |= B43_TMSLOW_PHYRESET;
2652         ssb_write32(sdev, SSB_TMSLOW, tmslow);
2653         msleep(1);
2654 }
2655
2656 /* Expects wl->mutex locked */
2657 static int b43_switch_phymode(struct b43_wl *wl, unsigned int new_mode)
2658 {
2659         struct b43_wldev *up_dev;
2660         struct b43_wldev *down_dev;
2661         int err;
2662         bool gmode = 0;
2663         int prev_status;
2664
2665         err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode);
2666         if (err) {
2667                 b43err(wl, "Could not find a device for %s-PHY mode\n",
2668                        phymode_to_string(new_mode));
2669                 return err;
2670         }
2671         if ((up_dev == wl->current_dev) &&
2672             (!!wl->current_dev->phy.gmode == !!gmode)) {
2673                 /* This device is already running. */
2674                 return 0;
2675         }
2676         b43dbg(wl, "Reconfiguring PHYmode to %s-PHY\n",
2677                phymode_to_string(new_mode));
2678         down_dev = wl->current_dev;
2679
2680         prev_status = b43_status(down_dev);
2681         /* Shutdown the currently running core. */
2682         if (prev_status >= B43_STAT_STARTED)
2683                 b43_wireless_core_stop(down_dev);
2684         if (prev_status >= B43_STAT_INITIALIZED)
2685                 b43_wireless_core_exit(down_dev);
2686
2687         if (down_dev != up_dev) {
2688                 /* We switch to a different core, so we put PHY into
2689                  * RESET on the old core. */
2690                 b43_put_phy_into_reset(down_dev);
2691         }
2692
2693         /* Now start the new core. */
2694         up_dev->phy.gmode = gmode;
2695         if (prev_status >= B43_STAT_INITIALIZED) {
2696                 err = b43_wireless_core_init(up_dev);
2697                 if (err) {
2698                         b43err(wl, "Fatal: Could not initialize device for "
2699                                "newly selected %s-PHY mode\n",
2700                                phymode_to_string(new_mode));
2701                         goto init_failure;
2702                 }
2703         }
2704         if (prev_status >= B43_STAT_STARTED) {
2705                 err = b43_wireless_core_start(up_dev);
2706                 if (err) {
2707                         b43err(wl, "Fatal: Coult not start device for "
2708                                "newly selected %s-PHY mode\n",
2709                                phymode_to_string(new_mode));
2710                         b43_wireless_core_exit(up_dev);
2711                         goto init_failure;
2712                 }
2713         }
2714         B43_WARN_ON(b43_status(up_dev) != prev_status);
2715
2716         wl->current_dev = up_dev;
2717
2718         return 0;
2719       init_failure:
2720         /* Whoops, failed to init the new core. No core is operating now. */
2721         wl->current_dev = NULL;
2722         return err;
2723 }
2724
2725 /* Check if the use of the antenna that ieee80211 told us to
2726  * use is possible. This will fall back to DEFAULT.
2727  * "antenna_nr" is the antenna identifier we got from ieee80211. */
2728 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
2729                                   u8 antenna_nr)
2730 {
2731         u8 antenna_mask;
2732
2733         if (antenna_nr == 0) {
2734                 /* Zero means "use default antenna". That's always OK. */
2735                 return 0;
2736         }
2737
2738         /* Get the mask of available antennas. */
2739         if (dev->phy.gmode)
2740                 antenna_mask = dev->dev->bus->sprom.ant_available_bg;
2741         else
2742                 antenna_mask = dev->dev->bus->sprom.ant_available_a;
2743
2744         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
2745                 /* This antenna is not available. Fall back to default. */
2746                 return 0;
2747         }
2748
2749         return antenna_nr;
2750 }
2751
2752 static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
2753 {
2754         antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
2755         switch (antenna) {
2756         case 0:         /* default/diversity */
2757                 return B43_ANTENNA_DEFAULT;
2758         case 1:         /* Antenna 0 */
2759                 return B43_ANTENNA0;
2760         case 2:         /* Antenna 1 */
2761                 return B43_ANTENNA1;
2762         case 3:         /* Antenna 2 */
2763                 return B43_ANTENNA2;
2764         case 4:         /* Antenna 3 */
2765                 return B43_ANTENNA3;
2766         default:
2767                 return B43_ANTENNA_DEFAULT;
2768         }
2769 }
2770
2771 static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
2772 {
2773         struct b43_wl *wl = hw_to_b43_wl(hw);
2774         struct b43_wldev *dev;
2775         struct b43_phy *phy;
2776         unsigned long flags;
2777         unsigned int new_phymode = 0xFFFF;
2778         int antenna;
2779         int err = 0;
2780         u32 savedirqs;
2781
2782         mutex_lock(&wl->mutex);
2783
2784         /* Switch the PHY mode (if necessary). */
2785         switch (conf->phymode) {
2786         case MODE_IEEE80211A:
2787                 new_phymode = B43_PHYMODE_A;
2788                 break;
2789         case MODE_IEEE80211B:
2790                 new_phymode = B43_PHYMODE_B;
2791                 break;
2792         case MODE_IEEE80211G:
2793                 new_phymode = B43_PHYMODE_G;
2794                 break;
2795         default:
2796                 B43_WARN_ON(1);
2797         }
2798         err = b43_switch_phymode(wl, new_phymode);
2799         if (err)
2800                 goto out_unlock_mutex;
2801         dev = wl->current_dev;
2802         phy = &dev->phy;
2803
2804         /* Disable IRQs while reconfiguring the device.
2805          * This makes it possible to drop the spinlock throughout
2806          * the reconfiguration process. */
2807         spin_lock_irqsave(&wl->irq_lock, flags);
2808         if (b43_status(dev) < B43_STAT_STARTED) {
2809                 spin_unlock_irqrestore(&wl->irq_lock, flags);
2810                 goto out_unlock_mutex;
2811         }
2812         savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
2813         spin_unlock_irqrestore(&wl->irq_lock, flags);
2814         b43_synchronize_irq(dev);
2815
2816         /* Switch to the requested channel.
2817          * The firmware takes care of races with the TX handler. */
2818         if (conf->channel_val != phy->channel)
2819                 b43_radio_selectchannel(dev, conf->channel_val, 0);
2820
2821         /* Enable/Disable ShortSlot timing. */
2822         if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
2823             dev->short_slot) {
2824                 B43_WARN_ON(phy->type != B43_PHYTYPE_G);
2825                 if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
2826                         b43_short_slot_timing_enable(dev);
2827                 else
2828                         b43_short_slot_timing_disable(dev);
2829         }
2830
2831         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
2832
2833         /* Adjust the desired TX power level. */
2834         if (conf->power_level != 0) {
2835                 if (conf->power_level != phy->power_level) {
2836                         phy->power_level = conf->power_level;
2837                         b43_phy_xmitpower(dev);
2838                 }
2839         }
2840
2841         /* Antennas for RX and management frame TX. */
2842         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
2843         b43_mgmtframe_txantenna(dev, antenna);
2844         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
2845         b43_set_rx_antenna(dev, antenna);
2846
2847         /* Update templates for AP mode. */
2848         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2849                 b43_set_beacon_int(dev, conf->beacon_int);
2850
2851         if (!!conf->radio_enabled != phy->radio_on) {
2852                 if (conf->radio_enabled) {
2853                         b43_radio_turn_on(dev);
2854                         b43info(dev->wl, "Radio turned on by software\n");
2855                         if (!dev->radio_hw_enable) {
2856                                 b43info(dev->wl, "The hardware RF-kill button "
2857                                         "still turns the radio physically off. "
2858                                         "Press the button to turn it on.\n");
2859                         }
2860                 } else {
2861                         b43_radio_turn_off(dev, 0);
2862                         b43info(dev->wl, "Radio turned off by software\n");
2863                 }
2864         }
2865
2866         spin_lock_irqsave(&wl->irq_lock, flags);
2867         b43_interrupt_enable(dev, savedirqs);
2868         mmiowb();
2869         spin_unlock_irqrestore(&wl->irq_lock, flags);
2870       out_unlock_mutex:
2871         mutex_unlock(&wl->mutex);
2872
2873         return err;
2874 }
2875
2876 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2877                            const u8 *local_addr, const u8 *addr,
2878                            struct ieee80211_key_conf *key)
2879 {
2880         struct b43_wl *wl = hw_to_b43_wl(hw);
2881         struct b43_wldev *dev;
2882         unsigned long flags;
2883         u8 algorithm;
2884         u8 index;
2885         int err;
2886         DECLARE_MAC_BUF(mac);
2887
2888         if (modparam_nohwcrypt)
2889                 return -ENOSPC; /* User disabled HW-crypto */
2890
2891         mutex_lock(&wl->mutex);
2892         spin_lock_irqsave(&wl->irq_lock, flags);
2893
2894         dev = wl->current_dev;
2895         err = -ENODEV;
2896         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
2897                 goto out_unlock;
2898
2899         err = -EINVAL;
2900         switch (key->alg) {
2901         case ALG_WEP:
2902                 if (key->keylen == 5)
2903                         algorithm = B43_SEC_ALGO_WEP40;
2904                 else
2905                         algorithm = B43_SEC_ALGO_WEP104;
2906                 break;
2907         case ALG_TKIP:
2908                 algorithm = B43_SEC_ALGO_TKIP;
2909                 break;
2910         case ALG_CCMP:
2911                 algorithm = B43_SEC_ALGO_AES;
2912                 break;
2913         default:
2914                 B43_WARN_ON(1);
2915                 goto out_unlock;
2916         }
2917         index = (u8) (key->keyidx);
2918         if (index > 3)
2919                 goto out_unlock;
2920
2921         switch (cmd) {
2922         case SET_KEY:
2923                 if (algorithm == B43_SEC_ALGO_TKIP) {
2924                         /* FIXME: No TKIP hardware encryption for now. */
2925                         err = -EOPNOTSUPP;
2926                         goto out_unlock;
2927                 }
2928
2929                 if (is_broadcast_ether_addr(addr)) {
2930                         /* addr is FF:FF:FF:FF:FF:FF for default keys */
2931                         err = b43_key_write(dev, index, algorithm,
2932                                             key->key, key->keylen, NULL, key);
2933                 } else {
2934                         /*
2935                          * either pairwise key or address is 00:00:00:00:00:00
2936                          * for transmit-only keys
2937                          */
2938                         err = b43_key_write(dev, -1, algorithm,
2939                                             key->key, key->keylen, addr, key);
2940                 }
2941                 if (err)
2942                         goto out_unlock;
2943
2944                 if (algorithm == B43_SEC_ALGO_WEP40 ||
2945                     algorithm == B43_SEC_ALGO_WEP104) {
2946                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
2947                 } else {
2948                         b43_hf_write(dev,
2949                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
2950                 }
2951                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2952                 break;
2953         case DISABLE_KEY: {
2954                 err = b43_key_clear(dev, key->hw_key_idx);
2955                 if (err)
2956                         goto out_unlock;
2957                 break;
2958         }
2959         default:
2960                 B43_WARN_ON(1);
2961         }
2962 out_unlock:
2963         spin_unlock_irqrestore(&wl->irq_lock, flags);
2964         mutex_unlock(&wl->mutex);
2965         if (!err) {
2966                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
2967                        "mac: %s\n",
2968                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
2969                        print_mac(mac, addr));
2970         }
2971         return err;
2972 }
2973
2974 static void b43_op_configure_filter(struct ieee80211_hw *hw,
2975                                     unsigned int changed, unsigned int *fflags,
2976                                     int mc_count, struct dev_addr_list *mc_list)
2977 {
2978         struct b43_wl *wl = hw_to_b43_wl(hw);
2979         struct b43_wldev *dev = wl->current_dev;
2980         unsigned long flags;
2981
2982         if (!dev) {
2983                 *fflags = 0;
2984                 return;
2985         }
2986
2987         spin_lock_irqsave(&wl->irq_lock, flags);
2988         *fflags &= FIF_PROMISC_IN_BSS |
2989                   FIF_ALLMULTI |
2990                   FIF_FCSFAIL |
2991                   FIF_PLCPFAIL |
2992                   FIF_CONTROL |
2993                   FIF_OTHER_BSS |
2994                   FIF_BCN_PRBRESP_PROMISC;
2995
2996         changed &= FIF_PROMISC_IN_BSS |
2997                    FIF_ALLMULTI |
2998                    FIF_FCSFAIL |
2999                    FIF_PLCPFAIL |
3000                    FIF_CONTROL |
3001                    FIF_OTHER_BSS |
3002                    FIF_BCN_PRBRESP_PROMISC;
3003
3004         wl->filter_flags = *fflags;
3005
3006         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
3007                 b43_adjust_opmode(dev);
3008         spin_unlock_irqrestore(&wl->irq_lock, flags);
3009 }
3010
3011 static int b43_op_config_interface(struct ieee80211_hw *hw,
3012                                    struct ieee80211_vif *vif,
3013                                    struct ieee80211_if_conf *conf)
3014 {
3015         struct b43_wl *wl = hw_to_b43_wl(hw);
3016         struct b43_wldev *dev = wl->current_dev;
3017         unsigned long flags;
3018
3019         if (!dev)
3020                 return -ENODEV;
3021         mutex_lock(&wl->mutex);
3022         spin_lock_irqsave(&wl->irq_lock, flags);
3023         B43_WARN_ON(wl->vif != vif);
3024         if (conf->bssid)
3025                 memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3026         else
3027                 memset(wl->bssid, 0, ETH_ALEN);
3028         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3029                 if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
3030                         B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
3031                         b43_set_ssid(dev, conf->ssid, conf->ssid_len);
3032                         if (conf->beacon)
3033                                 b43_update_templates(wl, conf->beacon);
3034                 }
3035                 b43_write_mac_bssid_templates(dev);
3036         }
3037         spin_unlock_irqrestore(&wl->irq_lock, flags);
3038         mutex_unlock(&wl->mutex);
3039
3040         return 0;
3041 }
3042
3043 /* Locking: wl->mutex */
3044 static void b43_wireless_core_stop(struct b43_wldev *dev)
3045 {
3046         struct b43_wl *wl = dev->wl;
3047         unsigned long flags;
3048
3049         if (b43_status(dev) < B43_STAT_STARTED)
3050                 return;
3051
3052         /* Disable and sync interrupts. We must do this before than
3053          * setting the status to INITIALIZED, as the interrupt handler
3054          * won't care about IRQs then. */
3055         spin_lock_irqsave(&wl->irq_lock, flags);
3056         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
3057         b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
3058         spin_unlock_irqrestore(&wl->irq_lock, flags);
3059         b43_synchronize_irq(dev);
3060
3061         b43_set_status(dev, B43_STAT_INITIALIZED);
3062
3063         mutex_unlock(&wl->mutex);
3064         /* Must unlock as it would otherwise deadlock. No races here.
3065          * Cancel the possibly running self-rearming periodic work. */
3066         cancel_delayed_work_sync(&dev->periodic_work);
3067         mutex_lock(&wl->mutex);
3068
3069         ieee80211_stop_queues(wl->hw);  //FIXME this could cause a deadlock, as mac80211 seems buggy.
3070
3071         b43_mac_suspend(dev);
3072         free_irq(dev->dev->irq, dev);
3073         b43dbg(wl, "Wireless interface stopped\n");
3074 }
3075
3076 /* Locking: wl->mutex */
3077 static int b43_wireless_core_start(struct b43_wldev *dev)
3078 {
3079         int err;
3080
3081         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
3082
3083         drain_txstatus_queue(dev);
3084         err = request_irq(dev->dev->irq, b43_interrupt_handler,
3085                           IRQF_SHARED, KBUILD_MODNAME, dev);
3086         if (err) {
3087                 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
3088                 goto out;
3089         }
3090
3091         /* We are ready to run. */
3092         b43_set_status(dev, B43_STAT_STARTED);
3093
3094         /* Start data flow (TX/RX). */
3095         b43_mac_enable(dev);
3096         b43_interrupt_enable(dev, dev->irq_savedstate);
3097         ieee80211_start_queues(dev->wl->hw);
3098
3099         /* Start maintainance work */
3100         b43_periodic_tasks_setup(dev);
3101
3102         b43dbg(dev->wl, "Wireless interface started\n");
3103       out:
3104         return err;
3105 }
3106
3107 /* Get PHY and RADIO versioning numbers */
3108 static int b43_phy_versioning(struct b43_wldev *dev)
3109 {
3110         struct b43_phy *phy = &dev->phy;
3111         u32 tmp;
3112         u8 analog_type;
3113         u8 phy_type;
3114         u8 phy_rev;
3115         u16 radio_manuf;
3116         u16 radio_ver;
3117         u16 radio_rev;
3118         int unsupported = 0;
3119
3120         /* Get PHY versioning */
3121         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
3122         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
3123         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
3124         phy_rev = (tmp & B43_PHYVER_VERSION);
3125         switch (phy_type) {
3126         case B43_PHYTYPE_A:
3127                 if (phy_rev >= 4)
3128                         unsupported = 1;
3129                 break;
3130         case B43_PHYTYPE_B:
3131                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
3132                     && phy_rev != 7)
3133                         unsupported = 1;
3134                 break;
3135         case B43_PHYTYPE_G:
3136                 if (phy_rev > 9)
3137                         unsupported = 1;
3138                 break;
3139 #ifdef CONFIG_B43_NPHY
3140         case B43_PHYTYPE_N:
3141                 if (phy_rev > 1)
3142                         unsupported = 1;
3143                 break;
3144 #endif
3145         default:
3146                 unsupported = 1;
3147         };
3148         if (unsupported) {
3149                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
3150                        "(Analog %u, Type %u, Revision %u)\n",
3151                        analog_type, phy_type, phy_rev);
3152                 return -EOPNOTSUPP;
3153         }
3154         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
3155                analog_type, phy_type, phy_rev);
3156
3157         /* Get RADIO versioning */
3158         if (dev->dev->bus->chip_id == 0x4317) {
3159                 if (dev->dev->bus->chip_rev == 0)
3160                         tmp = 0x3205017F;
3161                 else if (dev->dev->bus->chip_rev == 1)
3162                         tmp = 0x4205017F;
3163                 else
3164                         tmp = 0x5205017F;
3165         } else {
3166                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3167                 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
3168                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3169                 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
3170         }
3171         radio_manuf = (tmp & 0x00000FFF);
3172         radio_ver = (tmp & 0x0FFFF000) >> 12;
3173         radio_rev = (tmp & 0xF0000000) >> 28;
3174         if (radio_manuf != 0x17F /* Broadcom */)
3175                 unsupported = 1;
3176         switch (phy_type) {
3177         case B43_PHYTYPE_A:
3178                 if (radio_ver != 0x2060)
3179                         unsupported = 1;
3180                 if (radio_rev != 1)
3181                         unsupported = 1;
3182                 if (radio_manuf != 0x17F)
3183                         unsupported = 1;
3184                 break;
3185         case B43_PHYTYPE_B:
3186                 if ((radio_ver & 0xFFF0) != 0x2050)
3187                         unsupported = 1;
3188                 break;
3189         case B43_PHYTYPE_G:
3190                 if (radio_ver != 0x2050)
3191                         unsupported = 1;
3192                 break;
3193         case B43_PHYTYPE_N:
3194                 if (radio_ver != 0x2055)
3195                         unsupported = 1;
3196                 break;
3197         default:
3198                 B43_WARN_ON(1);
3199         }
3200         if (unsupported) {
3201                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
3202                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
3203                        radio_manuf, radio_ver, radio_rev);
3204                 return -EOPNOTSUPP;
3205         }
3206         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
3207                radio_manuf, radio_ver, radio_rev);
3208
3209         phy->radio_manuf = radio_manuf;
3210         phy->radio_ver = radio_ver;
3211         phy->radio_rev = radio_rev;
3212
3213         phy->analog = analog_type;
3214         phy->type = phy_type;
3215         phy->rev = phy_rev;
3216
3217         return 0;
3218 }
3219
3220 static void setup_struct_phy_for_init(struct b43_wldev *dev,
3221                                       struct b43_phy *phy)
3222 {
3223         struct b43_txpower_lo_control *lo;
3224         int i;
3225
3226         memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
3227         memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
3228
3229         phy->aci_enable = 0;
3230         phy->aci_wlan_automatic = 0;
3231         phy->aci_hw_rssi = 0;
3232
3233         phy->radio_off_context.valid = 0;
3234
3235         lo = phy->lo_control;
3236         if (lo) {
3237                 memset(lo, 0, sizeof(*(phy->lo_control)));
3238                 lo->rebuild = 1;
3239                 lo->tx_bias = 0xFF;
3240         }
3241         phy->max_lb_gain = 0;
3242         phy->trsw_rx_gain = 0;
3243         phy->txpwr_offset = 0;
3244
3245         /* NRSSI */
3246         phy->nrssislope = 0;
3247         for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
3248                 phy->nrssi[i] = -1000;
3249         for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
3250                 phy->nrssi_lt[i] = i;
3251
3252         phy->lofcal = 0xFFFF;
3253         phy->initval = 0xFFFF;
3254
3255         phy->interfmode = B43_INTERFMODE_NONE;
3256         phy->channel = 0xFF;
3257
3258         phy->hardware_power_control = !!modparam_hwpctl;
3259
3260         /* PHY TX errors counter. */
3261         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3262
3263         /* OFDM-table address caching. */
3264         phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
3265 }
3266
3267 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
3268 {
3269         dev->dfq_valid = 0;
3270
3271         /* Assume the radio is enabled. If it's not enabled, the state will
3272          * immediately get fixed on the first periodic work run. */
3273         dev->radio_hw_enable = 1;
3274
3275         /* Stats */
3276         memset(&dev->stats, 0, sizeof(dev->stats));
3277
3278         setup_struct_phy_for_init(dev, &dev->phy);
3279
3280         /* IRQ related flags */
3281         dev->irq_reason = 0;
3282         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
3283         dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
3284
3285         dev->mac_suspended = 1;
3286
3287         /* Noise calculation context */
3288         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
3289 }
3290
3291 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
3292 {
3293         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
3294         u32 hf;
3295
3296         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
3297                 return;
3298         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
3299                 return;
3300
3301         hf = b43_hf_read(dev);
3302         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
3303                 hf |= B43_HF_BTCOEXALT;
3304         else
3305                 hf |= B43_HF_BTCOEX;
3306         b43_hf_write(dev, hf);
3307         //TODO
3308 }
3309
3310 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
3311 {                               //TODO
3312 }
3313
3314 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
3315 {
3316 #ifdef CONFIG_SSB_DRIVER_PCICORE
3317         struct ssb_bus *bus = dev->dev->bus;
3318         u32 tmp;
3319
3320         if (bus->pcicore.dev &&
3321             bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
3322             bus->pcicore.dev->id.revision <= 5) {
3323                 /* IMCFGLO timeouts workaround. */
3324                 tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
3325                 tmp &= ~SSB_IMCFGLO_REQTO;
3326                 tmp &= ~SSB_IMCFGLO_SERTO;
3327                 switch (bus->bustype) {
3328                 case SSB_BUSTYPE_PCI:
3329                 case SSB_BUSTYPE_PCMCIA:
3330                         tmp |= 0x32;
3331                         break;
3332                 case SSB_BUSTYPE_SSB:
3333                         tmp |= 0x53;
3334                         break;
3335                 }
3336                 ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
3337         }
3338 #endif /* CONFIG_SSB_DRIVER_PCICORE */
3339 }
3340
3341 /* Write the short and long frame retry limit values. */
3342 static void b43_set_retry_limits(struct b43_wldev *dev,
3343                                  unsigned int short_retry,
3344                                  unsigned int long_retry)
3345 {
3346         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3347          * the chip-internal counter. */
3348         short_retry = min(short_retry, (unsigned int)0xF);
3349         long_retry = min(long_retry, (unsigned int)0xF);
3350
3351         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3352                         short_retry);
3353         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3354                         long_retry);
3355 }
3356
3357 /* Shutdown a wireless core */
3358 /* Locking: wl->mutex */
3359 static void b43_wireless_core_exit(struct b43_wldev *dev)
3360 {
3361         struct b43_phy *phy = &dev->phy;
3362
3363         B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
3364         if (b43_status(dev) != B43_STAT_INITIALIZED)
3365                 return;
3366         b43_set_status(dev, B43_STAT_UNINIT);
3367
3368         b43_leds_exit(dev);
3369         b43_rng_exit(dev->wl);
3370         b43_dma_free(dev);
3371         b43_chip_exit(dev);
3372         b43_radio_turn_off(dev, 1);
3373         b43_switch_analog(dev, 0);
3374         if (phy->dyn_tssi_tbl)
3375                 kfree(phy->tssi2dbm);
3376         kfree(phy->lo_control);
3377         phy->lo_control = NULL;
3378         if (dev->wl->current_beacon) {
3379                 dev_kfree_skb_any(dev->wl->current_beacon);
3380                 dev->wl->current_beacon = NULL;
3381         }
3382
3383         ssb_device_disable(dev->dev, 0);
3384         ssb_bus_may_powerdown(dev->dev->bus);
3385 }
3386
3387 /* Initialize a wireless core */
3388 static int b43_wireless_core_init(struct b43_wldev *dev)
3389 {
3390         struct b43_wl *wl = dev->wl;
3391         struct ssb_bus *bus = dev->dev->bus;
3392         struct ssb_sprom *sprom = &bus->sprom;
3393         struct b43_phy *phy = &dev->phy;
3394         int err;
3395         u32 hf, tmp;
3396
3397         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3398
3399         err = ssb_bus_powerup(bus, 0);
3400         if (err)
3401                 goto out;
3402         if (!ssb_device_is_enabled(dev->dev)) {
3403                 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
3404                 b43_wireless_core_reset(dev, tmp);
3405         }
3406
3407         if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
3408                 phy->lo_control =
3409                     kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
3410                 if (!phy->lo_control) {
3411                         err = -ENOMEM;
3412                         goto err_busdown;
3413                 }
3414         }
3415         setup_struct_wldev_for_init(dev);
3416
3417         err = b43_phy_init_tssi2dbm_table(dev);
3418         if (err)
3419                 goto err_kfree_lo_control;
3420
3421         /* Enable IRQ routing to this device. */
3422         ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
3423
3424         b43_imcfglo_timeouts_workaround(dev);
3425         b43_bluetooth_coext_disable(dev);
3426         b43_phy_early_init(dev);
3427         err = b43_chip_init(dev);
3428         if (err)
3429                 goto err_kfree_tssitbl;
3430         b43_shm_write16(dev, B43_SHM_SHARED,
3431                         B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
3432         hf = b43_hf_read(dev);
3433         if (phy->type == B43_PHYTYPE_G) {
3434                 hf |= B43_HF_SYMW;
3435                 if (phy->rev == 1)
3436                         hf |= B43_HF_GDCW;
3437                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
3438                         hf |= B43_HF_OFDMPABOOST;
3439         } else if (phy->type == B43_PHYTYPE_B) {
3440                 hf |= B43_HF_SYMW;
3441                 if (phy->rev >= 2 && phy->radio_ver == 0x2050)
3442                         hf &= ~B43_HF_GDCW;
3443         }
3444         b43_hf_write(dev, hf);
3445
3446         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
3447                              B43_DEFAULT_LONG_RETRY_LIMIT);
3448         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
3449         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
3450
3451         /* Disable sending probe responses from firmware.
3452          * Setting the MaxTime to one usec will always trigger
3453          * a timeout, so we never send any probe resp.
3454          * A timeout of zero is infinite. */
3455         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
3456
3457         b43_rate_memory_init(dev);
3458
3459         /* Minimum Contention Window */
3460         if (phy->type == B43_PHYTYPE_B) {
3461                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
3462         } else {
3463                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
3464         }
3465         /* Maximum Contention Window */
3466         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
3467
3468         err = b43_dma_init(dev);
3469         if (err)
3470                 goto err_chip_exit;
3471         b43_qos_init(dev);
3472
3473 //FIXME
3474 #if 1
3475         b43_write16(dev, 0x0612, 0x0050);
3476         b43_shm_write16(dev, B43_SHM_SHARED, 0x0416, 0x0050);
3477         b43_shm_write16(dev, B43_SHM_SHARED, 0x0414, 0x01F4);
3478 #endif
3479
3480         b43_bluetooth_coext_enable(dev);
3481
3482         ssb_bus_powerup(bus, 1);        /* Enable dynamic PCTL */
3483         memset(wl->bssid, 0, ETH_ALEN);
3484         memset(wl->mac_addr, 0, ETH_ALEN);
3485         b43_upload_card_macaddress(dev);
3486         b43_security_init(dev);
3487         b43_rng_init(wl);
3488
3489         b43_set_status(dev, B43_STAT_INITIALIZED);
3490
3491         b43_leds_init(dev);
3492 out:
3493         return err;
3494
3495       err_chip_exit:
3496         b43_chip_exit(dev);
3497       err_kfree_tssitbl:
3498         if (phy->dyn_tssi_tbl)
3499                 kfree(phy->tssi2dbm);
3500       err_kfree_lo_control:
3501         kfree(phy->lo_control);
3502         phy->lo_control = NULL;
3503       err_busdown:
3504         ssb_bus_may_powerdown(bus);
3505         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3506         return err;
3507 }
3508
3509 static int b43_op_add_interface(struct ieee80211_hw *hw,
3510                                 struct ieee80211_if_init_conf *conf)
3511 {
3512         struct b43_wl *wl = hw_to_b43_wl(hw);
3513         struct b43_wldev *dev;
3514         unsigned long flags;
3515         int err = -EOPNOTSUPP;
3516
3517         /* TODO: allow WDS/AP devices to coexist */
3518
3519         if (conf->type != IEEE80211_IF_TYPE_AP &&
3520             conf->type != IEEE80211_IF_TYPE_STA &&
3521             conf->type != IEEE80211_IF_TYPE_WDS &&
3522             conf->type != IEEE80211_IF_TYPE_IBSS)
3523                 return -EOPNOTSUPP;
3524
3525         mutex_lock(&wl->mutex);
3526         if (wl->operating)
3527                 goto out_mutex_unlock;
3528
3529         b43dbg(wl, "Adding Interface type %d\n", conf->type);
3530
3531         dev = wl->current_dev;
3532         wl->operating = 1;
3533         wl->vif = conf->vif;
3534         wl->if_type = conf->type;
3535         memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
3536
3537         spin_lock_irqsave(&wl->irq_lock, flags);
3538         b43_adjust_opmode(dev);
3539         b43_upload_card_macaddress(dev);
3540         spin_unlock_irqrestore(&wl->irq_lock, flags);
3541
3542         err = 0;
3543  out_mutex_unlock:
3544         mutex_unlock(&wl->mutex);
3545
3546         return err;
3547 }
3548
3549 static void b43_op_remove_interface(struct ieee80211_hw *hw,
3550                                     struct ieee80211_if_init_conf *conf)
3551 {
3552         struct b43_wl *wl = hw_to_b43_wl(hw);
3553         struct b43_wldev *dev = wl->current_dev;
3554         unsigned long flags;
3555
3556         b43dbg(wl, "Removing Interface type %d\n", conf->type);
3557
3558         mutex_lock(&wl->mutex);
3559
3560         B43_WARN_ON(!wl->operating);
3561         B43_WARN_ON(wl->vif != conf->vif);
3562         wl->vif = NULL;
3563
3564         wl->operating = 0;
3565
3566         spin_lock_irqsave(&wl->irq_lock, flags);
3567         b43_adjust_opmode(dev);
3568         memset(wl->mac_addr, 0, ETH_ALEN);
3569         b43_upload_card_macaddress(dev);
3570         spin_unlock_irqrestore(&wl->irq_lock, flags);
3571
3572         mutex_unlock(&wl->mutex);
3573 }
3574
3575 static int b43_op_start(struct ieee80211_hw *hw)
3576 {
3577         struct b43_wl *wl = hw_to_b43_wl(hw);
3578         struct b43_wldev *dev = wl->current_dev;
3579         int did_init = 0;
3580         int err = 0;
3581
3582         /* First register RFkill.
3583          * LEDs that are registered later depend on it. */
3584         b43_rfkill_init(dev);
3585
3586         mutex_lock(&wl->mutex);
3587
3588         if (b43_status(dev) < B43_STAT_INITIALIZED) {
3589                 err = b43_wireless_core_init(dev);
3590                 if (err)
3591                         goto out_mutex_unlock;
3592                 did_init = 1;
3593         }
3594
3595         if (b43_status(dev) < B43_STAT_STARTED) {
3596                 err = b43_wireless_core_start(dev);
3597                 if (err) {
3598                         if (did_init)
3599                                 b43_wireless_core_exit(dev);
3600                         goto out_mutex_unlock;
3601                 }
3602         }
3603
3604  out_mutex_unlock:
3605         mutex_unlock(&wl->mutex);
3606
3607         return err;
3608 }
3609
3610 static void b43_op_stop(struct ieee80211_hw *hw)
3611 {
3612         struct b43_wl *wl = hw_to_b43_wl(hw);
3613         struct b43_wldev *dev = wl->current_dev;
3614
3615         b43_rfkill_exit(dev);
3616
3617         mutex_lock(&wl->mutex);
3618         if (b43_status(dev) >= B43_STAT_STARTED)
3619                 b43_wireless_core_stop(dev);
3620         b43_wireless_core_exit(dev);
3621         mutex_unlock(&wl->mutex);
3622 }
3623
3624 static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
3625                                   u32 short_retry_limit, u32 long_retry_limit)
3626 {
3627         struct b43_wl *wl = hw_to_b43_wl(hw);
3628         struct b43_wldev *dev;
3629         int err = 0;
3630
3631         mutex_lock(&wl->mutex);
3632         dev = wl->current_dev;
3633         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
3634                 err = -ENODEV;
3635                 goto out_unlock;
3636         }
3637         b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
3638 out_unlock:
3639         mutex_unlock(&wl->mutex);
3640
3641         return err;
3642 }
3643
3644 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
3645 {
3646         struct b43_wl *wl = hw_to_b43_wl(hw);
3647         struct sk_buff *beacon;
3648         unsigned long flags;
3649
3650         /* We could modify the existing beacon and set the aid bit in
3651          * the TIM field, but that would probably require resizing and
3652          * moving of data within the beacon template.
3653          * Simply request a new beacon and let mac80211 do the hard work. */
3654         beacon = ieee80211_beacon_get(hw, wl->vif, NULL);
3655         if (unlikely(!beacon))
3656                 return -ENOMEM;
3657         spin_lock_irqsave(&wl->irq_lock, flags);
3658         b43_update_templates(wl, beacon);
3659         spin_unlock_irqrestore(&wl->irq_lock, flags);
3660
3661         return 0;
3662 }
3663
3664 static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
3665                                      struct sk_buff *beacon,
3666                                      struct ieee80211_tx_control *ctl)
3667 {
3668         struct b43_wl *wl = hw_to_b43_wl(hw);
3669         unsigned long flags;
3670
3671         spin_lock_irqsave(&wl->irq_lock, flags);
3672         b43_update_templates(wl, beacon);
3673         spin_unlock_irqrestore(&wl->irq_lock, flags);
3674
3675         return 0;
3676 }
3677
3678 static const struct ieee80211_ops b43_hw_ops = {
3679         .tx                     = b43_op_tx,
3680         .conf_tx                = b43_op_conf_tx,
3681         .add_interface          = b43_op_add_interface,
3682         .remove_interface       = b43_op_remove_interface,
3683         .config                 = b43_op_config,
3684         .config_interface       = b43_op_config_interface,
3685         .configure_filter       = b43_op_configure_filter,
3686         .set_key                = b43_op_set_key,
3687         .get_stats              = b43_op_get_stats,
3688         .get_tx_stats           = b43_op_get_tx_stats,
3689         .start                  = b43_op_start,
3690         .stop                   = b43_op_stop,
3691         .set_retry_limit        = b43_op_set_retry_limit,
3692         .set_tim                = b43_op_beacon_set_tim,
3693         .beacon_update          = b43_op_ibss_beacon_update,
3694 };
3695
3696 /* Hard-reset the chip. Do not call this directly.
3697  * Use b43_controller_restart()
3698  */
3699 static void b43_chip_reset(struct work_struct *work)
3700 {
3701         struct b43_wldev *dev =
3702             container_of(work, struct b43_wldev, restart_work);
3703         struct b43_wl *wl = dev->wl;
3704         int err = 0;
3705         int prev_status;
3706
3707         mutex_lock(&wl->mutex);
3708
3709         prev_status = b43_status(dev);
3710         /* Bring the device down... */
3711         if (prev_status >= B43_STAT_STARTED)
3712                 b43_wireless_core_stop(dev);
3713         if (prev_status >= B43_STAT_INITIALIZED)
3714                 b43_wireless_core_exit(dev);
3715
3716         /* ...and up again. */
3717         if (prev_status >= B43_STAT_INITIALIZED) {
3718                 err = b43_wireless_core_init(dev);
3719                 if (err)
3720                         goto out;
3721         }
3722         if (prev_status >= B43_STAT_STARTED) {
3723                 err = b43_wireless_core_start(dev);
3724                 if (err) {
3725                         b43_wireless_core_exit(dev);
3726                         goto out;
3727                 }
3728         }
3729       out:
3730         mutex_unlock(&wl->mutex);
3731         if (err)
3732                 b43err(wl, "Controller restart FAILED\n");
3733         else
3734                 b43info(wl, "Controller restarted\n");
3735 }
3736
3737 static int b43_setup_modes(struct b43_wldev *dev,
3738                            bool have_2ghz_phy, bool have_5ghz_phy)
3739 {
3740         struct ieee80211_hw *hw = dev->wl->hw;
3741         struct ieee80211_hw_mode *mode;
3742         struct b43_phy *phy = &dev->phy;
3743         int err;
3744
3745         /* XXX: This function will go away soon, when mac80211
3746          *      band stuff is rewritten. So this is just a hack.
3747          *      For now we always claim GPHY mode, as there is no
3748          *      support for NPHY and APHY in the device, yet.
3749          *      This assumption is OK, as any B, N or A PHY will already
3750          *      have died a horrible sanity check death earlier. */
3751
3752         mode = &phy->hwmodes[0];
3753         mode->mode = MODE_IEEE80211G;
3754         mode->num_channels = b43_2ghz_chantable_size;
3755         mode->channels = b43_2ghz_chantable;
3756         mode->num_rates = b43_g_ratetable_size;
3757         mode->rates = b43_g_ratetable;
3758         err = ieee80211_register_hwmode(hw, mode);
3759         if (err)
3760                 return err;
3761         phy->possible_phymodes |= B43_PHYMODE_G;
3762
3763         return 0;
3764 }
3765
3766 static void b43_wireless_core_detach(struct b43_wldev *dev)
3767 {
3768         /* We release firmware that late to not be required to re-request
3769          * is all the time when we reinit the core. */
3770         b43_release_firmware(dev);
3771 }
3772
3773 static int b43_wireless_core_attach(struct b43_wldev *dev)
3774 {
3775         struct b43_wl *wl = dev->wl;
3776         struct ssb_bus *bus = dev->dev->bus;
3777         struct pci_dev *pdev = bus->host_pci;
3778         int err;
3779         bool have_2ghz_phy = 0, have_5ghz_phy = 0;
3780         u32 tmp;
3781
3782         /* Do NOT do any device initialization here.
3783          * Do it in wireless_core_init() instead.
3784          * This function is for gathering basic information about the HW, only.
3785          * Also some structs may be set up here. But most likely you want to have
3786          * that in core_init(), too.
3787          */
3788
3789         err = ssb_bus_powerup(bus, 0);
3790         if (err) {
3791                 b43err(wl, "Bus powerup failed\n");
3792                 goto out;
3793         }
3794         /* Get the PHY type. */
3795         if (dev->dev->id.revision >= 5) {
3796                 u32 tmshigh;
3797
3798                 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
3799                 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
3800                 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
3801         } else
3802                 B43_WARN_ON(1);
3803
3804         dev->phy.gmode = have_2ghz_phy;
3805         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
3806         b43_wireless_core_reset(dev, tmp);
3807
3808         err = b43_phy_versioning(dev);
3809         if (err)
3810                 goto err_powerdown;
3811         /* Check if this device supports multiband. */
3812         if (!pdev ||
3813             (pdev->device != 0x4312 &&
3814              pdev->device != 0x4319 && pdev->device != 0x4324)) {
3815                 /* No multiband support. */
3816                 have_2ghz_phy = 0;
3817                 have_5ghz_phy = 0;
3818                 switch (dev->phy.type) {
3819                 case B43_PHYTYPE_A:
3820                         have_5ghz_phy = 1;
3821                         break;
3822                 case B43_PHYTYPE_G:
3823                 case B43_PHYTYPE_N:
3824                         have_2ghz_phy = 1;
3825                         break;
3826                 default:
3827                         B43_WARN_ON(1);
3828                 }
3829         }
3830         if (dev->phy.type == B43_PHYTYPE_A) {
3831                 /* FIXME */
3832                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
3833                 err = -EOPNOTSUPP;
3834                 goto err_powerdown;
3835         }
3836         dev->phy.gmode = have_2ghz_phy;
3837         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
3838         b43_wireless_core_reset(dev, tmp);
3839
3840         err = b43_validate_chipaccess(dev);
3841         if (err)
3842                 goto err_powerdown;
3843         err = b43_setup_modes(dev, have_2ghz_phy, have_5ghz_phy);
3844         if (err)
3845                 goto err_powerdown;
3846
3847         /* Now set some default "current_dev" */
3848         if (!wl->current_dev)
3849                 wl->current_dev = dev;
3850         INIT_WORK(&dev->restart_work, b43_chip_reset);
3851
3852         b43_radio_turn_off(dev, 1);
3853         b43_switch_analog(dev, 0);
3854         ssb_device_disable(dev->dev, 0);
3855         ssb_bus_may_powerdown(bus);
3856
3857 out:
3858         return err;
3859
3860 err_powerdown:
3861         ssb_bus_may_powerdown(bus);
3862         return err;
3863 }
3864
3865 static void b43_one_core_detach(struct ssb_device *dev)
3866 {
3867         struct b43_wldev *wldev;
3868         struct b43_wl *wl;
3869
3870         wldev = ssb_get_drvdata(dev);
3871         wl = wldev->wl;
3872         cancel_work_sync(&wldev->restart_work);
3873         b43_debugfs_remove_device(wldev);
3874         b43_wireless_core_detach(wldev);
3875         list_del(&wldev->list);
3876         wl->nr_devs--;
3877         ssb_set_drvdata(dev, NULL);
3878         kfree(wldev);
3879 }
3880
3881 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
3882 {
3883         struct b43_wldev *wldev;
3884         struct pci_dev *pdev;
3885         int err = -ENOMEM;
3886
3887         if (!list_empty(&wl->devlist)) {
3888                 /* We are not the first core on this chip. */
3889                 pdev = dev->bus->host_pci;
3890                 /* Only special chips support more than one wireless
3891                  * core, although some of the other chips have more than
3892                  * one wireless core as well. Check for this and
3893                  * bail out early.
3894                  */
3895                 if (!pdev ||
3896                     ((pdev->device != 0x4321) &&
3897                      (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
3898                         b43dbg(wl, "Ignoring unconnected 802.11 core\n");
3899                         return -ENODEV;
3900                 }
3901         }
3902
3903         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
3904         if (!wldev)
3905                 goto out;
3906
3907         wldev->dev = dev;
3908         wldev->wl = wl;
3909         b43_set_status(wldev, B43_STAT_UNINIT);
3910         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
3911         tasklet_init(&wldev->isr_tasklet,
3912                      (void (*)(unsigned long))b43_interrupt_tasklet,
3913                      (unsigned long)wldev);
3914         INIT_LIST_HEAD(&wldev->list);
3915
3916         err = b43_wireless_core_attach(wldev);
3917         if (err)
3918                 goto err_kfree_wldev;
3919
3920         list_add(&wldev->list, &wl->devlist);
3921         wl->nr_devs++;
3922         ssb_set_drvdata(dev, wldev);
3923         b43_debugfs_add_device(wldev);
3924
3925       out:
3926         return err;
3927
3928       err_kfree_wldev:
3929         kfree(wldev);
3930         return err;
3931 }
3932
3933 static void b43_sprom_fixup(struct ssb_bus *bus)
3934 {
3935         /* boardflags workarounds */
3936         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
3937             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
3938                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
3939         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
3940             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
3941                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
3942 }
3943
3944 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
3945 {
3946         struct ieee80211_hw *hw = wl->hw;
3947
3948         ssb_set_devtypedata(dev, NULL);
3949         ieee80211_free_hw(hw);
3950 }
3951
3952 static int b43_wireless_init(struct ssb_device *dev)
3953 {
3954         struct ssb_sprom *sprom = &dev->bus->sprom;
3955         struct ieee80211_hw *hw;
3956         struct b43_wl *wl;
3957         int err = -ENOMEM;
3958
3959         b43_sprom_fixup(dev->bus);
3960
3961         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
3962         if (!hw) {
3963                 b43err(NULL, "Could not allocate ieee80211 device\n");
3964                 goto out;
3965         }
3966
3967         /* fill hw info */
3968         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
3969                     IEEE80211_HW_RX_INCLUDES_FCS;
3970         hw->max_signal = 100;
3971         hw->max_rssi = -110;
3972         hw->max_noise = -110;
3973         hw->queues = 1;         /* FIXME: hardware has more queues */
3974         SET_IEEE80211_DEV(hw, dev->dev);
3975         if (is_valid_ether_addr(sprom->et1mac))
3976                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
3977         else
3978                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
3979
3980         /* Get and initialize struct b43_wl */
3981         wl = hw_to_b43_wl(hw);
3982         memset(wl, 0, sizeof(*wl));
3983         wl->hw = hw;
3984         spin_lock_init(&wl->irq_lock);
3985         spin_lock_init(&wl->leds_lock);
3986         spin_lock_init(&wl->shm_lock);
3987         mutex_init(&wl->mutex);
3988         INIT_LIST_HEAD(&wl->devlist);
3989
3990         ssb_set_devtypedata(dev, wl);
3991         b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
3992         err = 0;
3993       out:
3994         return err;
3995 }
3996
3997 static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
3998 {
3999         struct b43_wl *wl;
4000         int err;
4001         int first = 0;
4002
4003         wl = ssb_get_devtypedata(dev);
4004         if (!wl) {
4005                 /* Probing the first core. Must setup common struct b43_wl */
4006                 first = 1;
4007                 err = b43_wireless_init(dev);
4008                 if (err)
4009                         goto out;
4010                 wl = ssb_get_devtypedata(dev);
4011                 B43_WARN_ON(!wl);
4012         }
4013         err = b43_one_core_attach(dev, wl);
4014         if (err)
4015                 goto err_wireless_exit;
4016
4017         if (first) {
4018                 err = ieee80211_register_hw(wl->hw);
4019                 if (err)
4020                         goto err_one_core_detach;
4021         }
4022
4023       out:
4024         return err;
4025
4026       err_one_core_detach:
4027         b43_one_core_detach(dev);
4028       err_wireless_exit:
4029         if (first)
4030                 b43_wireless_exit(dev, wl);
4031         return err;
4032 }
4033
4034 static void b43_remove(struct ssb_device *dev)
4035 {
4036         struct b43_wl *wl = ssb_get_devtypedata(dev);
4037         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4038
4039         B43_WARN_ON(!wl);
4040         if (wl->current_dev == wldev)
4041                 ieee80211_unregister_hw(wl->hw);
4042
4043         b43_one_core_detach(dev);
4044
4045         if (list_empty(&wl->devlist)) {
4046                 /* Last core on the chip unregistered.
4047                  * We can destroy common struct b43_wl.
4048                  */
4049                 b43_wireless_exit(dev, wl);
4050         }
4051 }
4052
4053 /* Perform a hardware reset. This can be called from any context. */
4054 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
4055 {
4056         /* Must avoid requeueing, if we are in shutdown. */
4057         if (b43_status(dev) < B43_STAT_INITIALIZED)
4058                 return;
4059         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
4060         queue_work(dev->wl->hw->workqueue, &dev->restart_work);
4061 }
4062
4063 #ifdef CONFIG_PM
4064
4065 static int b43_suspend(struct ssb_device *dev, pm_message_t state)
4066 {
4067         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4068         struct b43_wl *wl = wldev->wl;
4069
4070         b43dbg(wl, "Suspending...\n");
4071
4072         mutex_lock(&wl->mutex);
4073         wldev->suspend_init_status = b43_status(wldev);
4074         if (wldev->suspend_init_status >= B43_STAT_STARTED)
4075                 b43_wireless_core_stop(wldev);
4076         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
4077                 b43_wireless_core_exit(wldev);
4078         mutex_unlock(&wl->mutex);
4079
4080         b43dbg(wl, "Device suspended.\n");
4081
4082         return 0;
4083 }
4084
4085 static int b43_resume(struct ssb_device *dev)
4086 {
4087         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4088         struct b43_wl *wl = wldev->wl;
4089         int err = 0;
4090
4091         b43dbg(wl, "Resuming...\n");
4092
4093         mutex_lock(&wl->mutex);
4094         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
4095                 err = b43_wireless_core_init(wldev);
4096                 if (err) {
4097                         b43err(wl, "Resume failed at core init\n");
4098                         goto out;
4099                 }
4100         }
4101         if (wldev->suspend_init_status >= B43_STAT_STARTED) {
4102                 err = b43_wireless_core_start(wldev);
4103                 if (err) {
4104                         b43_wireless_core_exit(wldev);
4105                         b43err(wl, "Resume failed at core start\n");
4106                         goto out;
4107                 }
4108         }
4109         mutex_unlock(&wl->mutex);
4110
4111         b43dbg(wl, "Device resumed.\n");
4112       out:
4113         return err;
4114 }
4115
4116 #else /* CONFIG_PM */
4117 # define b43_suspend    NULL
4118 # define b43_resume     NULL
4119 #endif /* CONFIG_PM */
4120
4121 static struct ssb_driver b43_ssb_driver = {
4122         .name           = KBUILD_MODNAME,
4123         .id_table       = b43_ssb_tbl,
4124         .probe          = b43_probe,
4125         .remove         = b43_remove,
4126         .suspend        = b43_suspend,
4127         .resume         = b43_resume,
4128 };
4129
4130 static int __init b43_init(void)
4131 {
4132         int err;
4133
4134         b43_debugfs_init();
4135         err = b43_pcmcia_init();
4136         if (err)
4137                 goto err_dfs_exit;
4138         err = ssb_driver_register(&b43_ssb_driver);
4139         if (err)
4140                 goto err_pcmcia_exit;
4141
4142         return err;
4143
4144 err_pcmcia_exit:
4145         b43_pcmcia_exit();
4146 err_dfs_exit:
4147         b43_debugfs_exit();
4148         return err;
4149 }
4150
4151 static void __exit b43_exit(void)
4152 {
4153         ssb_driver_unregister(&b43_ssb_driver);
4154         b43_pcmcia_exit();
4155         b43_debugfs_exit();
4156 }
4157
4158 module_init(b43_init)
4159 module_exit(b43_exit)