SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10
  11   Some parts of the code in this file are derived from the ipw2200
  12   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  13
  14   This program is free software; you can redistribute it and/or modify
  15   it under the terms of the GNU General Public License as published by
  16   the Free Software Foundation; either version 2 of the License, or
  17   (at your option) any later version.
  18
  19   This program is distributed in the hope that it will be useful,
  20   but WITHOUT ANY WARRANTY; without even the implied warranty of
  21   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22   GNU General Public License for more details.
  23
  24   You should have received a copy of the GNU General Public License
  25   along with this program; see the file COPYING.  If not, write to
  26   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  27   Boston, MA 02110-1301, USA.
  28
  29 */
  30
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/moduleparam.h>
  34 #include <linux/if_arp.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/firmware.h>
  37 #include <linux/wireless.h>
  38 #include <linux/workqueue.h>
  39 #include <linux/skbuff.h>
  40 #include <linux/io.h>
  41 #include <linux/dma-mapping.h>
  42 #include <asm/unaligned.h>
  43
  44 #include "b43.h"
  45 #include "main.h"
  46 #include "debugfs.h"
  47 #include "phy_common.h"
  48 #include "phy_g.h"
  49 #include "phy_n.h"
  50 #include "dma.h"
  51 #include "pio.h"
  52 #include "sysfs.h"
  53 #include "xmit.h"
  54 #include "lo.h"
  55 #include "pcmcia.h"
  56
  57 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  58 MODULE_AUTHOR("Martin Langer");
  59 MODULE_AUTHOR("Stefano Brivio");
  60 MODULE_AUTHOR("Michael Buesch");
  61 MODULE_LICENSE("GPL");
  62
  63 MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
  64
  65
  66 static int modparam_bad_frames_preempt;
  67 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  68 MODULE_PARM_DESC(bad_frames_preempt,
  69                  "enable(1) / disable(0) Bad Frames Preemption");
  70
  71 static char modparam_fwpostfix[16];
  72 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  73 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  74
  75 static int modparam_hwpctl;
  76 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  77 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  78
  79 static int modparam_nohwcrypt;
  80 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  81 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  82
  83 int b43_modparam_qos = 1;
  84 module_param_named(qos, b43_modparam_qos, int, 0444);
  85 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
  86
  87 static int modparam_btcoex = 1;
  88 module_param_named(btcoex, modparam_btcoex, int, 0444);
  89 MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)");
  90
  91
  92 static const struct ssb_device_id b43_ssb_tbl[] = {
  93         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
  94         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
  95         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
  96         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
  97         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
  98         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
  99         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
 100         SSB_DEVTABLE_END
 101 };
 102
 103 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
 104
 105 /* Channel and ratetables are shared for all devices.
 106  * They can't be const, because ieee80211 puts some precalculated
 107  * data in there. This data is the same for all devices, so we don't
 108  * get concurrency issues */
 109 #define RATETAB_ENT(_rateid, _flags) \
 110         {                                                               \
 111                 .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
 112                 .hw_value       = (_rateid),                            \
 113                 .flags          = (_flags),                             \
 114         }
 115
 116 /*
 117  * NOTE: When changing this, sync with xmit.c's
 118  *       b43_plcp_get_bitrate_idx_* functions!
 119  */
 120 static struct ieee80211_rate __b43_ratetable[] = {
 121         RATETAB_ENT(B43_CCK_RATE_1MB, 0),
 122         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
 123         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
 124         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
 125         RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
 126         RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
 127         RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
 128         RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
 129         RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
 130         RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
 131         RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
 132         RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 133 };
 134
 135 #define b43_a_ratetable         (__b43_ratetable + 4)
 136 #define b43_a_ratetable_size    8
 137 #define b43_b_ratetable         (__b43_ratetable + 0)
 138 #define b43_b_ratetable_size    4
 139 #define b43_g_ratetable         (__b43_ratetable + 0)
 140 #define b43_g_ratetable_size    12
 141
 142 #define CHAN4G(_channel, _freq, _flags) {                       \
 143         .band                   = IEEE80211_BAND_2GHZ,          \
 144         .center_freq            = (_freq),                      \
 145         .hw_value               = (_channel),                   \
 146         .flags                  = (_flags),                     \
 147         .max_antenna_gain       = 0,                            \
 148         .max_power              = 30,                           \
 149 }
 150 static struct ieee80211_channel b43_2ghz_chantable[] = {
 151         CHAN4G(1, 2412, 0),
 152         CHAN4G(2, 2417, 0),
 153         CHAN4G(3, 2422, 0),
 154         CHAN4G(4, 2427, 0),
 155         CHAN4G(5, 2432, 0),
 156         CHAN4G(6, 2437, 0),
 157         CHAN4G(7, 2442, 0),
 158         CHAN4G(8, 2447, 0),
 159         CHAN4G(9, 2452, 0),
 160         CHAN4G(10, 2457, 0),
 161         CHAN4G(11, 2462, 0),
 162         CHAN4G(12, 2467, 0),
 163         CHAN4G(13, 2472, 0),
 164         CHAN4G(14, 2484, 0),
 165 };
 166 #undef CHAN4G
 167
 168 #define CHAN5G(_channel, _flags) {                              \
 169         .band                   = IEEE80211_BAND_5GHZ,          \
 170         .center_freq            = 5000 + (5 * (_channel)),      \
 171         .hw_value               = (_channel),                   \
 172         .flags                  = (_flags),                     \
 173         .max_antenna_gain       = 0,                            \
 174         .max_power              = 30,                           \
 175 }
 176 static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 177         CHAN5G(32, 0),          CHAN5G(34, 0),
 178         CHAN5G(36, 0),          CHAN5G(38, 0),
 179         CHAN5G(40, 0),          CHAN5G(42, 0),
 180         CHAN5G(44, 0),          CHAN5G(46, 0),
 181         CHAN5G(48, 0),          CHAN5G(50, 0),
 182         CHAN5G(52, 0),          CHAN5G(54, 0),
 183         CHAN5G(56, 0),          CHAN5G(58, 0),
 184         CHAN5G(60, 0),          CHAN5G(62, 0),
 185         CHAN5G(64, 0),          CHAN5G(66, 0),
 186         CHAN5G(68, 0),          CHAN5G(70, 0),
 187         CHAN5G(72, 0),          CHAN5G(74, 0),
 188         CHAN5G(76, 0),          CHAN5G(78, 0),
 189         CHAN5G(80, 0),          CHAN5G(82, 0),
 190         CHAN5G(84, 0),          CHAN5G(86, 0),
 191         CHAN5G(88, 0),          CHAN5G(90, 0),
 192         CHAN5G(92, 0),          CHAN5G(94, 0),
 193         CHAN5G(96, 0),          CHAN5G(98, 0),
 194         CHAN5G(100, 0),         CHAN5G(102, 0),
 195         CHAN5G(104, 0),         CHAN5G(106, 0),
 196         CHAN5G(108, 0),         CHAN5G(110, 0),
 197         CHAN5G(112, 0),         CHAN5G(114, 0),
 198         CHAN5G(116, 0),         CHAN5G(118, 0),
 199         CHAN5G(120, 0),         CHAN5G(122, 0),
 200         CHAN5G(124, 0),         CHAN5G(126, 0),
 201         CHAN5G(128, 0),         CHAN5G(130, 0),
 202         CHAN5G(132, 0),         CHAN5G(134, 0),
 203         CHAN5G(136, 0),         CHAN5G(138, 0),
 204         CHAN5G(140, 0),         CHAN5G(142, 0),
 205         CHAN5G(144, 0),         CHAN5G(145, 0),
 206         CHAN5G(146, 0),         CHAN5G(147, 0),
 207         CHAN5G(148, 0),         CHAN5G(149, 0),
 208         CHAN5G(150, 0),         CHAN5G(151, 0),
 209         CHAN5G(152, 0),         CHAN5G(153, 0),
 210         CHAN5G(154, 0),         CHAN5G(155, 0),
 211         CHAN5G(156, 0),         CHAN5G(157, 0),
 212         CHAN5G(158, 0),         CHAN5G(159, 0),
 213         CHAN5G(160, 0),         CHAN5G(161, 0),
 214         CHAN5G(162, 0),         CHAN5G(163, 0),
 215         CHAN5G(164, 0),         CHAN5G(165, 0),
 216         CHAN5G(166, 0),         CHAN5G(168, 0),
 217         CHAN5G(170, 0),         CHAN5G(172, 0),
 218         CHAN5G(174, 0),         CHAN5G(176, 0),
 219         CHAN5G(178, 0),         CHAN5G(180, 0),
 220         CHAN5G(182, 0),         CHAN5G(184, 0),
 221         CHAN5G(186, 0),         CHAN5G(188, 0),
 222         CHAN5G(190, 0),         CHAN5G(192, 0),
 223         CHAN5G(194, 0),         CHAN5G(196, 0),
 224         CHAN5G(198, 0),         CHAN5G(200, 0),
 225         CHAN5G(202, 0),         CHAN5G(204, 0),
 226         CHAN5G(206, 0),         CHAN5G(208, 0),
 227         CHAN5G(210, 0),         CHAN5G(212, 0),
 228         CHAN5G(214, 0),         CHAN5G(216, 0),
 229         CHAN5G(218, 0),         CHAN5G(220, 0),
 230         CHAN5G(222, 0),         CHAN5G(224, 0),
 231         CHAN5G(226, 0),         CHAN5G(228, 0),
 232 };
 233
 234 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 235         CHAN5G(34, 0),          CHAN5G(36, 0),
 236         CHAN5G(38, 0),          CHAN5G(40, 0),
 237         CHAN5G(42, 0),          CHAN5G(44, 0),
 238         CHAN5G(46, 0),          CHAN5G(48, 0),
 239         CHAN5G(52, 0),          CHAN5G(56, 0),
 240         CHAN5G(60, 0),          CHAN5G(64, 0),
 241         CHAN5G(100, 0),         CHAN5G(104, 0),
 242         CHAN5G(108, 0),         CHAN5G(112, 0),
 243         CHAN5G(116, 0),         CHAN5G(120, 0),
 244         CHAN5G(124, 0),         CHAN5G(128, 0),
 245         CHAN5G(132, 0),         CHAN5G(136, 0),
 246         CHAN5G(140, 0),         CHAN5G(149, 0),
 247         CHAN5G(153, 0),         CHAN5G(157, 0),
 248         CHAN5G(161, 0),         CHAN5G(165, 0),
 249         CHAN5G(184, 0),         CHAN5G(188, 0),
 250         CHAN5G(192, 0),         CHAN5G(196, 0),
 251         CHAN5G(200, 0),         CHAN5G(204, 0),
 252         CHAN5G(208, 0),         CHAN5G(212, 0),
 253         CHAN5G(216, 0),
 254 };
 255 #undef CHAN5G
 256
 257 static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 258         .band           = IEEE80211_BAND_5GHZ,
 259         .channels       = b43_5ghz_nphy_chantable,
 260         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
 261         .bitrates       = b43_a_ratetable,
 262         .n_bitrates     = b43_a_ratetable_size,
 263 };
 264
 265 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 266         .band           = IEEE80211_BAND_5GHZ,
 267         .channels       = b43_5ghz_aphy_chantable,
 268         .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
 269         .bitrates       = b43_a_ratetable,
 270         .n_bitrates     = b43_a_ratetable_size,
 271 };
 272
 273 static struct ieee80211_supported_band b43_band_2GHz = {
 274         .band           = IEEE80211_BAND_2GHZ,
 275         .channels       = b43_2ghz_chantable,
 276         .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
 277         .bitrates       = b43_g_ratetable,
 278         .n_bitrates     = b43_g_ratetable_size,
 279 };
 280
 281 static void b43_wireless_core_exit(struct b43_wldev *dev);
 282 static int b43_wireless_core_init(struct b43_wldev *dev);
 283 static void b43_wireless_core_stop(struct b43_wldev *dev);
 284 static int b43_wireless_core_start(struct b43_wldev *dev);
 285
 286 static int b43_ratelimit(struct b43_wl *wl)
 287 {
 288         if (!wl || !wl->current_dev)
 289                 return 1;
 290         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 291                 return 1;
 292         /* We are up and running.
 293          * Ratelimit the messages to avoid DoS over the net. */
 294         return net_ratelimit();
 295 }
 296
 297 void b43info(struct b43_wl *wl, const char *fmt, ...)
 298 {
 299         va_list args;
 300
 301         if (!b43_ratelimit(wl))
 302                 return;
 303         va_start(args, fmt);
 304         printk(KERN_INFO "b43-%s: ",
 305                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 306         vprintk(fmt, args);
 307         va_end(args);
 308 }
 309
 310 void b43err(struct b43_wl *wl, const char *fmt, ...)
 311 {
 312         va_list args;
 313
 314         if (!b43_ratelimit(wl))
 315                 return;
 316         va_start(args, fmt);
 317         printk(KERN_ERR "b43-%s ERROR: ",
 318                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 319         vprintk(fmt, args);
 320         va_end(args);
 321 }
 322
 323 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 324 {
 325         va_list args;
 326
 327         if (!b43_ratelimit(wl))
 328                 return;
 329         va_start(args, fmt);
 330         printk(KERN_WARNING "b43-%s warning: ",
 331                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 332         vprintk(fmt, args);
 333         va_end(args);
 334 }
 335
 336 #if B43_DEBUG
 337 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 338 {
 339         va_list args;
 340
 341         va_start(args, fmt);
 342         printk(KERN_DEBUG "b43-%s debug: ",
 343                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 344         vprintk(fmt, args);
 345         va_end(args);
 346 }
 347 #endif /* DEBUG */
 348
 349 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 350 {
 351         u32 macctl;
 352
 353         B43_WARN_ON(offset % 4 != 0);
 354
 355         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 356         if (macctl & B43_MACCTL_BE)
 357                 val = swab32(val);
 358
 359         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 360         mmiowb();
 361         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 362 }
 363
 364 static inline void b43_shm_control_word(struct b43_wldev *dev,
 365                                         u16 routing, u16 offset)
 366 {
 367         u32 control;
 368
 369         /* "offset" is the WORD offset. */
 370         control = routing;
 371         control <<= 16;
 372         control |= offset;
 373         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 374 }
 375
 376 u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 377 {
 378         u32 ret;
 379
 380         if (routing == B43_SHM_SHARED) {
 381                 B43_WARN_ON(offset & 0x0001);
 382                 if (offset & 0x0003) {
 383                         /* Unaligned access */
 384                         b43_shm_control_word(dev, routing, offset >> 2);
 385                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 386                         ret <<= 16;
 387                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 388                         ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
 389
 390                         goto out;
 391                 }
 392                 offset >>= 2;
 393         }
 394         b43_shm_control_word(dev, routing, offset);
 395         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 396 out:
 397         return ret;
 398 }
 399
 400 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 401 {
 402         struct b43_wl *wl = dev->wl;
 403         unsigned long flags;
 404         u32 ret;
 405
 406         spin_lock_irqsave(&wl->shm_lock, flags);
 407         ret = __b43_shm_read32(dev, routing, offset);
 408         spin_unlock_irqrestore(&wl->shm_lock, flags);
 409
 410         return ret;
 411 }
 412
 413 u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 414 {
 415         u16 ret;
 416
 417         if (routing == B43_SHM_SHARED) {
 418                 B43_WARN_ON(offset & 0x0001);
 419                 if (offset & 0x0003) {
 420                         /* Unaligned access */
 421                         b43_shm_control_word(dev, routing, offset >> 2);
 422                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 423
 424                         goto out;
 425                 }
 426                 offset >>= 2;
 427         }
 428         b43_shm_control_word(dev, routing, offset);
 429         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 430 out:
 431         return ret;
 432 }
 433
 434 u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 435 {
 436         struct b43_wl *wl = dev->wl;
 437         unsigned long flags;
 438         u16 ret;
 439
 440         spin_lock_irqsave(&wl->shm_lock, flags);
 441         ret = __b43_shm_read16(dev, routing, offset);
 442         spin_unlock_irqrestore(&wl->shm_lock, flags);
 443
 444         return ret;
 445 }
 446
 447 void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 448 {
 449         if (routing == B43_SHM_SHARED) {
 450                 B43_WARN_ON(offset & 0x0001);
 451                 if (offset & 0x0003) {
 452                         /* Unaligned access */
 453                         b43_shm_control_word(dev, routing, offset >> 2);
 454                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 455                                     (value >> 16) & 0xffff);
 456                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 457                         b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
 458                         return;
 459                 }
 460                 offset >>= 2;
 461         }
 462         b43_shm_control_word(dev, routing, offset);
 463         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 464 }
 465
 466 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 467 {
 468         struct b43_wl *wl = dev->wl;
 469         unsigned long flags;
 470
 471         spin_lock_irqsave(&wl->shm_lock, flags);
 472         __b43_shm_write32(dev, routing, offset, value);
 473         spin_unlock_irqrestore(&wl->shm_lock, flags);
 474 }
 475
 476 void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 477 {
 478         if (routing == B43_SHM_SHARED) {
 479                 B43_WARN_ON(offset & 0x0001);
 480                 if (offset & 0x0003) {
 481                         /* Unaligned access */
 482                         b43_shm_control_word(dev, routing, offset >> 2);
 483                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 484                         return;
 485                 }
 486                 offset >>= 2;
 487         }
 488         b43_shm_control_word(dev, routing, offset);
 489         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 490 }
 491
 492 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 493 {
 494         struct b43_wl *wl = dev->wl;
 495         unsigned long flags;
 496
 497         spin_lock_irqsave(&wl->shm_lock, flags);
 498         __b43_shm_write16(dev, routing, offset, value);
 499         spin_unlock_irqrestore(&wl->shm_lock, flags);
 500 }
 501
 502 /* Read HostFlags */
 503 u64 b43_hf_read(struct b43_wldev * dev)
 504 {
 505         u64 ret;
 506
 507         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 508         ret <<= 16;
 509         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI);
 510         ret <<= 16;
 511         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 512
 513         return ret;
 514 }
 515
 516 /* Write HostFlags */
 517 void b43_hf_write(struct b43_wldev *dev, u64 value)
 518 {
 519         u16 lo, mi, hi;
 520
 521         lo = (value & 0x00000000FFFFULL);
 522         mi = (value & 0x0000FFFF0000ULL) >> 16;
 523         hi = (value & 0xFFFF00000000ULL) >> 32;
 524         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo);
 525         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi);
 526         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 527 }
 528
 529 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
 530 {
 531         /* We need to be careful. As we read the TSF from multiple
 532          * registers, we should take care of register overflows.
 533          * In theory, the whole tsf read process should be atomic.
 534          * We try to be atomic here, by restaring the read process,
 535          * if any of the high registers changed (overflew).
 536          */
 537         if (dev->dev->id.revision >= 3) {
 538                 u32 low, high, high2;
 539
 540                 do {
 541                         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 542                         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 543                         high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 544                 } while (unlikely(high != high2));
 545
 546                 *tsf = high;
 547                 *tsf <<= 32;
 548                 *tsf |= low;
 549         } else {
 550                 u64 tmp;
 551                 u16 v0, v1, v2, v3;
 552                 u16 test1, test2, test3;
 553
 554                 do {
 555                         v3 = b43_read16(dev, B43_MMIO_TSF_3);
 556                         v2 = b43_read16(dev, B43_MMIO_TSF_2);
 557                         v1 = b43_read16(dev, B43_MMIO_TSF_1);
 558                         v0 = b43_read16(dev, B43_MMIO_TSF_0);
 559
 560                         test3 = b43_read16(dev, B43_MMIO_TSF_3);
 561                         test2 = b43_read16(dev, B43_MMIO_TSF_2);
 562                         test1 = b43_read16(dev, B43_MMIO_TSF_1);
 563                 } while (v3 != test3 || v2 != test2 || v1 != test1);
 564
 565                 *tsf = v3;
 566                 *tsf <<= 48;
 567                 tmp = v2;
 568                 tmp <<= 32;
 569                 *tsf |= tmp;
 570                 tmp = v1;
 571                 tmp <<= 16;
 572                 *tsf |= tmp;
 573                 *tsf |= v0;
 574         }
 575 }
 576
 577 static void b43_time_lock(struct b43_wldev *dev)
 578 {
 579         u32 macctl;
 580
 581         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 582         macctl |= B43_MACCTL_TBTTHOLD;
 583         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 584         /* Commit the write */
 585         b43_read32(dev, B43_MMIO_MACCTL);
 586 }
 587
 588 static void b43_time_unlock(struct b43_wldev *dev)
 589 {
 590         u32 macctl;
 591
 592         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 593         macctl &= ~B43_MACCTL_TBTTHOLD;
 594         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 595         /* Commit the write */
 596         b43_read32(dev, B43_MMIO_MACCTL);
 597 }
 598
 599 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 600 {
 601         /* Be careful with the in-progress timer.
 602          * First zero out the low register, so we have a full
 603          * register-overflow duration to complete the operation.
 604          */
 605         if (dev->dev->id.revision >= 3) {
 606                 u32 lo = (tsf & 0x00000000FFFFFFFFULL);
 607                 u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
 608
 609                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0);
 610                 mmiowb();
 611                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi);
 612                 mmiowb();
 613                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo);
 614         } else {
 615                 u16 v0 = (tsf & 0x000000000000FFFFULL);
 616                 u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
 617                 u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
 618                 u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
 619
 620                 b43_write16(dev, B43_MMIO_TSF_0, 0);
 621                 mmiowb();
 622                 b43_write16(dev, B43_MMIO_TSF_3, v3);
 623                 mmiowb();
 624                 b43_write16(dev, B43_MMIO_TSF_2, v2);
 625                 mmiowb();
 626                 b43_write16(dev, B43_MMIO_TSF_1, v1);
 627                 mmiowb();
 628                 b43_write16(dev, B43_MMIO_TSF_0, v0);
 629         }
 630 }
 631
 632 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 633 {
 634         b43_time_lock(dev);
 635         b43_tsf_write_locked(dev, tsf);
 636         b43_time_unlock(dev);
 637 }
 638
 639 static
 640 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
 641 {
 642         static const u8 zero_addr[ETH_ALEN] = { 0 };
 643         u16 data;
 644
 645         if (!mac)
 646                 mac = zero_addr;
 647
 648         offset |= 0x0020;
 649         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 650
 651         data = mac[0];
 652         data |= mac[1] << 8;
 653         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 654         data = mac[2];
 655         data |= mac[3] << 8;
 656         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 657         data = mac[4];
 658         data |= mac[5] << 8;
 659         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 660 }
 661
 662 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 663 {
 664         const u8 *mac;
 665         const u8 *bssid;
 666         u8 mac_bssid[ETH_ALEN * 2];
 667         int i;
 668         u32 tmp;
 669
 670         bssid = dev->wl->bssid;
 671         mac = dev->wl->mac_addr;
 672
 673         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 674
 675         memcpy(mac_bssid, mac, ETH_ALEN);
 676         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 677
 678         /* Write our MAC address and BSSID to template ram */
 679         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 680                 tmp = (u32) (mac_bssid[i + 0]);
 681                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 682                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 683                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 684                 b43_ram_write(dev, 0x20 + i, tmp);
 685         }
 686 }
 687
 688 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 689 {
 690         b43_write_mac_bssid_templates(dev);
 691         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 692 }
 693
 694 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 695 {
 696         /* slot_time is in usec. */
 697         if (dev->phy.type != B43_PHYTYPE_G)
 698                 return;
 699         b43_write16(dev, 0x684, 510 + slot_time);
 700         b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 701 }
 702
 703 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 704 {
 705         b43_set_slot_time(dev, 9);
 706         dev->short_slot = 1;
 707 }
 708
 709 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 710 {
 711         b43_set_slot_time(dev, 20);
 712         dev->short_slot = 0;
 713 }
 714
 715 /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
 716  * Returns the _previously_ enabled IRQ mask.
 717  */
 718 static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
 719 {
 720         u32 old_mask;
 721
 722         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 723         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
 724
 725         return old_mask;
 726 }
 727
 728 /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
 729  * Returns the _previously_ enabled IRQ mask.
 730  */
 731 static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
 732 {
 733         u32 old_mask;
 734
 735         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 736         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
 737
 738         return old_mask;
 739 }
 740
 741 /* Synchronize IRQ top- and bottom-half.
 742  * IRQs must be masked before calling this.
 743  * This must not be called with the irq_lock held.
 744  */
 745 static void b43_synchronize_irq(struct b43_wldev *dev)
 746 {
 747         synchronize_irq(dev->dev->irq);
 748         tasklet_kill(&dev->isr_tasklet);
 749 }
 750
 751 /* DummyTransmission function, as documented on
 752  * http://bcm-specs.sipsolutions.net/DummyTransmission
 753  */
 754 void b43_dummy_transmission(struct b43_wldev *dev)
 755 {
 756         struct b43_wl *wl = dev->wl;
 757         struct b43_phy *phy = &dev->phy;
 758         unsigned int i, max_loop;
 759         u16 value;
 760         u32 buffer[5] = {
 761                 0x00000000,
 762                 0x00D40000,
 763                 0x00000000,
 764                 0x01000000,
 765                 0x00000000,
 766         };
 767
 768         switch (phy->type) {
 769         case B43_PHYTYPE_A:
 770                 max_loop = 0x1E;
 771                 buffer[0] = 0x000201CC;
 772                 break;
 773         case B43_PHYTYPE_B:
 774         case B43_PHYTYPE_G:
 775                 max_loop = 0xFA;
 776                 buffer[0] = 0x000B846E;
 777                 break;
 778         default:
 779                 B43_WARN_ON(1);
 780                 return;
 781         }
 782
 783         spin_lock_irq(&wl->irq_lock);
 784         write_lock(&wl->tx_lock);
 785
 786         for (i = 0; i < 5; i++)
 787                 b43_ram_write(dev, i * 4, buffer[i]);
 788
 789         /* Commit writes */
 790         b43_read32(dev, B43_MMIO_MACCTL);
 791
 792         b43_write16(dev, 0x0568, 0x0000);
 793         b43_write16(dev, 0x07C0, 0x0000);
 794         value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
 795         b43_write16(dev, 0x050C, value);
 796         b43_write16(dev, 0x0508, 0x0000);
 797         b43_write16(dev, 0x050A, 0x0000);
 798         b43_write16(dev, 0x054C, 0x0000);
 799         b43_write16(dev, 0x056A, 0x0014);
 800         b43_write16(dev, 0x0568, 0x0826);
 801         b43_write16(dev, 0x0500, 0x0000);
 802         b43_write16(dev, 0x0502, 0x0030);
 803
 804         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 805                 b43_radio_write16(dev, 0x0051, 0x0017);
 806         for (i = 0x00; i < max_loop; i++) {
 807                 value = b43_read16(dev, 0x050E);
 808                 if (value & 0x0080)
 809                         break;
 810                 udelay(10);
 811         }
 812         for (i = 0x00; i < 0x0A; i++) {
 813                 value = b43_read16(dev, 0x050E);
 814                 if (value & 0x0400)
 815                         break;
 816                 udelay(10);
 817         }
 818         for (i = 0x00; i < 0x0A; i++) {
 819                 value = b43_read16(dev, 0x0690);
 820                 if (!(value & 0x0100))
 821                         break;
 822                 udelay(10);
 823         }
 824         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 825                 b43_radio_write16(dev, 0x0051, 0x0037);
 826
 827         write_unlock(&wl->tx_lock);
 828         spin_unlock_irq(&wl->irq_lock);
 829 }
 830
 831 static void key_write(struct b43_wldev *dev,
 832                       u8 index, u8 algorithm, const u8 * key)
 833 {
 834         unsigned int i;
 835         u32 offset;
 836         u16 value;
 837         u16 kidx;
 838
 839         /* Key index/algo block */
 840         kidx = b43_kidx_to_fw(dev, index);
 841         value = ((kidx << 4) | algorithm);
 842         b43_shm_write16(dev, B43_SHM_SHARED,
 843                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 844
 845         /* Write the key to the Key Table Pointer offset */
 846         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 847         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 848                 value = key[i];
 849                 value |= (u16) (key[i + 1]) << 8;
 850                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 851         }
 852 }
 853
 854 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
 855 {
 856         u32 addrtmp[2] = { 0, 0, };
 857         u8 per_sta_keys_start = 8;
 858
 859         if (b43_new_kidx_api(dev))
 860                 per_sta_keys_start = 4;
 861
 862         B43_WARN_ON(index < per_sta_keys_start);
 863         /* We have two default TX keys and possibly two default RX keys.
 864          * Physical mac 0 is mapped to physical key 4 or 8, depending
 865          * on the firmware version.
 866          * So we must adjust the index here.
 867          */
 868         index -= per_sta_keys_start;
 869
 870         if (addr) {
 871                 addrtmp[0] = addr[0];
 872                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 873                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 874                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 875                 addrtmp[1] = addr[4];
 876                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 877         }
 878
 879         if (dev->dev->id.revision >= 5) {
 880                 /* Receive match transmitter address mechanism */
 881                 b43_shm_write32(dev, B43_SHM_RCMTA,
 882                                 (index * 2) + 0, addrtmp[0]);
 883                 b43_shm_write16(dev, B43_SHM_RCMTA,
 884                                 (index * 2) + 1, addrtmp[1]);
 885         } else {
 886                 /* RXE (Receive Engine) and
 887                  * PSM (Programmable State Machine) mechanism
 888                  */
 889                 if (index < 8) {
 890                         /* TODO write to RCM 16, 19, 22 and 25 */
 891                 } else {
 892                         b43_shm_write32(dev, B43_SHM_SHARED,
 893                                         B43_SHM_SH_PSM + (index * 6) + 0,
 894                                         addrtmp[0]);
 895                         b43_shm_write16(dev, B43_SHM_SHARED,
 896                                         B43_SHM_SH_PSM + (index * 6) + 4,
 897                                         addrtmp[1]);
 898                 }
 899         }
 900 }
 901
 902 static void do_key_write(struct b43_wldev *dev,
 903                          u8 index, u8 algorithm,
 904                          const u8 * key, size_t key_len, const u8 * mac_addr)
 905 {
 906         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 907         u8 per_sta_keys_start = 8;
 908
 909         if (b43_new_kidx_api(dev))
 910                 per_sta_keys_start = 4;
 911
 912         B43_WARN_ON(index >= dev->max_nr_keys);
 913         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 914
 915         if (index >= per_sta_keys_start)
 916                 keymac_write(dev, index, NULL); /* First zero out mac. */
 917         if (key)
 918                 memcpy(buf, key, key_len);
 919         key_write(dev, index, algorithm, buf);
 920         if (index >= per_sta_keys_start)
 921                 keymac_write(dev, index, mac_addr);
 922
 923         dev->key[index].algorithm = algorithm;
 924 }
 925
 926 static int b43_key_write(struct b43_wldev *dev,
 927                          int index, u8 algorithm,
 928                          const u8 * key, size_t key_len,
 929                          const u8 * mac_addr,
 930                          struct ieee80211_key_conf *keyconf)
 931 {
 932         int i;
 933         int sta_keys_start;
 934
 935         if (key_len > B43_SEC_KEYSIZE)
 936                 return -EINVAL;
 937         for (i = 0; i < dev->max_nr_keys; i++) {
 938                 /* Check that we don't already have this key. */
 939                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 940         }
 941         if (index < 0) {
 942                 /* Either pairwise key or address is 00:00:00:00:00:00
 943                  * for transmit-only keys. Search the index. */
 944                 if (b43_new_kidx_api(dev))
 945                         sta_keys_start = 4;
 946                 else
 947                         sta_keys_start = 8;
 948                 for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
 949                         if (!dev->key[i].keyconf) {
 950                                 /* found empty */
 951                                 index = i;
 952                                 break;
 953                         }
 954                 }
 955                 if (index < 0) {
 956                         b43err(dev->wl, "Out of hardware key memory\n");
 957                         return -ENOSPC;
 958                 }
 959         } else
 960                 B43_WARN_ON(index > 3);
 961
 962         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
 963         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 964                 /* Default RX key */
 965                 B43_WARN_ON(mac_addr);
 966                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
 967         }
 968         keyconf->hw_key_idx = index;
 969         dev->key[index].keyconf = keyconf;
 970
 971         return 0;
 972 }
 973
 974 static int b43_key_clear(struct b43_wldev *dev, int index)
 975 {
 976         if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
 977                 return -EINVAL;
 978         do_key_write(dev, index, B43_SEC_ALGO_NONE,
 979                      NULL, B43_SEC_KEYSIZE, NULL);
 980         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 981                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
 982                              NULL, B43_SEC_KEYSIZE, NULL);
 983         }
 984         dev->key[index].keyconf = NULL;
 985
 986         return 0;
 987 }
 988
 989 static void b43_clear_keys(struct b43_wldev *dev)
 990 {
 991         int i;
 992
 993         for (i = 0; i < dev->max_nr_keys; i++)
 994                 b43_key_clear(dev, i);
 995 }
 996
 997 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 998 {
 999         u32 macctl;
1000         u16 ucstat;
1001         bool hwps;
1002         bool awake;
1003         int i;
1004
1005         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
1006                     (ps_flags & B43_PS_DISABLED));
1007         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
1008
1009         if (ps_flags & B43_PS_ENABLED) {
1010                 hwps = 1;
1011         } else if (ps_flags & B43_PS_DISABLED) {
1012                 hwps = 0;
1013         } else {
1014                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
1015                 //      and thus is not an AP and we are associated, set bit 25
1016         }
1017         if (ps_flags & B43_PS_AWAKE) {
1018                 awake = 1;
1019         } else if (ps_flags & B43_PS_ASLEEP) {
1020                 awake = 0;
1021         } else {
1022                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
1023                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
1024                 //      successful, set bit26
1025         }
1026
1027 /* FIXME: For now we force awake-on and hwps-off */
1028         hwps = 0;
1029         awake = 1;
1030
1031         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1032         if (hwps)
1033                 macctl |= B43_MACCTL_HWPS;
1034         else
1035                 macctl &= ~B43_MACCTL_HWPS;
1036         if (awake)
1037                 macctl |= B43_MACCTL_AWAKE;
1038         else
1039                 macctl &= ~B43_MACCTL_AWAKE;
1040         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1041         /* Commit write */
1042         b43_read32(dev, B43_MMIO_MACCTL);
1043         if (awake && dev->dev->id.revision >= 5) {
1044                 /* Wait for the microcode to wake up. */
1045                 for (i = 0; i < 100; i++) {
1046                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
1047                                                 B43_SHM_SH_UCODESTAT);
1048                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
1049                                 break;
1050                         udelay(10);
1051                 }
1052         }
1053 }
1054
1055 /* Turn the Analog ON/OFF */
1056 static void b43_switch_analog(struct b43_wldev *dev, int on)
1057 {
1058         switch (dev->phy.type) {
1059         case B43_PHYTYPE_A:
1060         case B43_PHYTYPE_G:
1061                 b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
1062                 break;
1063         case B43_PHYTYPE_N:
1064                 b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
1065                               on ? 0 : 0x7FFF);
1066                 break;
1067         default:
1068                 B43_WARN_ON(1);
1069         }
1070 }
1071
1072 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
1073 {
1074         u32 tmslow;
1075         u32 macctl;
1076
1077         flags |= B43_TMSLOW_PHYCLKEN;
1078         flags |= B43_TMSLOW_PHYRESET;
1079         ssb_device_enable(dev->dev, flags);
1080         msleep(2);              /* Wait for the PLL to turn on. */
1081
1082         /* Now take the PHY out of Reset again */
1083         tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
1084         tmslow |= SSB_TMSLOW_FGC;
1085         tmslow &= ~B43_TMSLOW_PHYRESET;
1086         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1087         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1088         msleep(1);
1089         tmslow &= ~SSB_TMSLOW_FGC;
1090         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1091         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1092         msleep(1);
1093
1094         /* Turn Analog ON */
1095         b43_switch_analog(dev, 1);
1096
1097         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1098         macctl &= ~B43_MACCTL_GMODE;
1099         if (flags & B43_TMSLOW_GMODE)
1100                 macctl |= B43_MACCTL_GMODE;
1101         macctl |= B43_MACCTL_IHR_ENABLED;
1102         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1103 }
1104
1105 static void handle_irq_transmit_status(struct b43_wldev *dev)
1106 {
1107         u32 v0, v1;
1108         u16 tmp;
1109         struct b43_txstatus stat;
1110
1111         while (1) {
1112                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1113                 if (!(v0 & 0x00000001))
1114                         break;
1115                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1116
1117                 stat.cookie = (v0 >> 16);
1118                 stat.seq = (v1 & 0x0000FFFF);
1119                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
1120                 tmp = (v0 & 0x0000FFFF);
1121                 stat.frame_count = ((tmp & 0xF000) >> 12);
1122                 stat.rts_count = ((tmp & 0x0F00) >> 8);
1123                 stat.supp_reason = ((tmp & 0x001C) >> 2);
1124                 stat.pm_indicated = !!(tmp & 0x0080);
1125                 stat.intermediate = !!(tmp & 0x0040);
1126                 stat.for_ampdu = !!(tmp & 0x0020);
1127                 stat.acked = !!(tmp & 0x0002);
1128
1129                 b43_handle_txstatus(dev, &stat);
1130         }
1131 }
1132
1133 static void drain_txstatus_queue(struct b43_wldev *dev)
1134 {
1135         u32 dummy;
1136
1137         if (dev->dev->id.revision < 5)
1138                 return;
1139         /* Read all entries from the microcode TXstatus FIFO
1140          * and throw them away.
1141          */
1142         while (1) {
1143                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1144                 if (!(dummy & 0x00000001))
1145                         break;
1146                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1147         }
1148 }
1149
1150 static u32 b43_jssi_read(struct b43_wldev *dev)
1151 {
1152         u32 val = 0;
1153
1154         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
1155         val <<= 16;
1156         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1157
1158         return val;
1159 }
1160
1161 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1162 {
1163         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1164         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1165 }
1166
1167 static void b43_generate_noise_sample(struct b43_wldev *dev)
1168 {
1169         b43_jssi_write(dev, 0x7F7F7F7F);
1170         b43_write32(dev, B43_MMIO_MACCMD,
1171                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1172 }
1173
1174 static void b43_calculate_link_quality(struct b43_wldev *dev)
1175 {
1176         /* Top half of Link Quality calculation. */
1177
1178         if (dev->phy.type != B43_PHYTYPE_G)
1179                 return;
1180         if (dev->noisecalc.calculation_running)
1181                 return;
1182         dev->noisecalc.calculation_running = 1;
1183         dev->noisecalc.nr_samples = 0;
1184
1185         b43_generate_noise_sample(dev);
1186 }
1187
1188 static void handle_irq_noise(struct b43_wldev *dev)
1189 {
1190         struct b43_phy_g *phy = dev->phy.g;
1191         u16 tmp;
1192         u8 noise[4];
1193         u8 i, j;
1194         s32 average;
1195
1196         /* Bottom half of Link Quality calculation. */
1197
1198         if (dev->phy.type != B43_PHYTYPE_G)
1199                 return;
1200
1201         /* Possible race condition: It might be possible that the user
1202          * changed to a different channel in the meantime since we
1203          * started the calculation. We ignore that fact, since it's
1204          * not really that much of a problem. The background noise is
1205          * an estimation only anyway. Slightly wrong results will get damped
1206          * by the averaging of the 8 sample rounds. Additionally the
1207          * value is shortlived. So it will be replaced by the next noise
1208          * calculation round soon. */
1209
1210         B43_WARN_ON(!dev->noisecalc.calculation_running);
1211         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1212         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1213             noise[2] == 0x7F || noise[3] == 0x7F)
1214                 goto generate_new;
1215
1216         /* Get the noise samples. */
1217         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1218         i = dev->noisecalc.nr_samples;
1219         noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1220         noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1221         noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1222         noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1223         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1224         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1225         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1226         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1227         dev->noisecalc.nr_samples++;
1228         if (dev->noisecalc.nr_samples == 8) {
1229                 /* Calculate the Link Quality by the noise samples. */
1230                 average = 0;
1231                 for (i = 0; i < 8; i++) {
1232                         for (j = 0; j < 4; j++)
1233                                 average += dev->noisecalc.samples[i][j];
1234                 }
1235                 average /= (8 * 4);
1236                 average *= 125;
1237                 average += 64;
1238                 average /= 128;
1239                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1240                 tmp = (tmp / 128) & 0x1F;
1241                 if (tmp >= 8)
1242                         average += 2;
1243                 else
1244                         average -= 25;
1245                 if (tmp == 8)
1246                         average -= 72;
1247                 else
1248                         average -= 48;
1249
1250                 dev->stats.link_noise = average;
1251                 dev->noisecalc.calculation_running = 0;
1252                 return;
1253         }
1254 generate_new:
1255         b43_generate_noise_sample(dev);
1256 }
1257
1258 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1259 {
1260         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
1261                 ///TODO: PS TBTT
1262         } else {
1263                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1264                         b43_power_saving_ctl_bits(dev, 0);
1265         }
1266         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
1267                 dev->dfq_valid = 1;
1268 }
1269
1270 static void handle_irq_atim_end(struct b43_wldev *dev)
1271 {
1272         if (dev->dfq_valid) {
1273                 b43_write32(dev, B43_MMIO_MACCMD,
1274                             b43_read32(dev, B43_MMIO_MACCMD)
1275                             | B43_MACCMD_DFQ_VALID);
1276                 dev->dfq_valid = 0;
1277         }
1278 }
1279
1280 static void handle_irq_pmq(struct b43_wldev *dev)
1281 {
1282         u32 tmp;
1283
1284         //TODO: AP mode.
1285
1286         while (1) {
1287                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1288                 if (!(tmp & 0x00000008))
1289                         break;
1290         }
1291         /* 16bit write is odd, but correct. */
1292         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1293 }
1294
1295 static void b43_write_template_common(struct b43_wldev *dev,
1296                                       const u8 * data, u16 size,
1297                                       u16 ram_offset,
1298                                       u16 shm_size_offset, u8 rate)
1299 {
1300         u32 i, tmp;
1301         struct b43_plcp_hdr4 plcp;
1302
1303         plcp.data = 0;
1304         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1305         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1306         ram_offset += sizeof(u32);
1307         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1308          * So leave the first two bytes of the next write blank.
1309          */
1310         tmp = (u32) (data[0]) << 16;
1311         tmp |= (u32) (data[1]) << 24;
1312         b43_ram_write(dev, ram_offset, tmp);
1313         ram_offset += sizeof(u32);
1314         for (i = 2; i < size; i += sizeof(u32)) {
1315                 tmp = (u32) (data[i + 0]);
1316                 if (i + 1 < size)
1317                         tmp |= (u32) (data[i + 1]) << 8;
1318                 if (i + 2 < size)
1319                         tmp |= (u32) (data[i + 2]) << 16;
1320                 if (i + 3 < size)
1321                         tmp |= (u32) (data[i + 3]) << 24;
1322                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1323         }
1324         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1325                         size + sizeof(struct b43_plcp_hdr6));
1326 }
1327
1328 /* Check if the use of the antenna that ieee80211 told us to
1329  * use is possible. This will fall back to DEFAULT.
1330  * "antenna_nr" is the antenna identifier we got from ieee80211. */
1331 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
1332                                   u8 antenna_nr)
1333 {
1334         u8 antenna_mask;
1335
1336         if (antenna_nr == 0) {
1337                 /* Zero means "use default antenna". That's always OK. */
1338                 return 0;
1339         }
1340
1341         /* Get the mask of available antennas. */
1342         if (dev->phy.gmode)
1343                 antenna_mask = dev->dev->bus->sprom.ant_available_bg;
1344         else
1345                 antenna_mask = dev->dev->bus->sprom.ant_available_a;
1346
1347         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
1348                 /* This antenna is not available. Fall back to default. */
1349                 return 0;
1350         }
1351
1352         return antenna_nr;
1353 }
1354
1355 static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
1356 {
1357         antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
1358         switch (antenna) {
1359         case 0:         /* default/diversity */
1360                 return B43_ANTENNA_DEFAULT;
1361         case 1:         /* Antenna 0 */
1362                 return B43_ANTENNA0;
1363         case 2:         /* Antenna 1 */
1364                 return B43_ANTENNA1;
1365         case 3:         /* Antenna 2 */
1366                 return B43_ANTENNA2;
1367         case 4:         /* Antenna 3 */
1368                 return B43_ANTENNA3;
1369         default:
1370                 return B43_ANTENNA_DEFAULT;
1371         }
1372 }
1373
1374 /* Convert a b43 antenna number value to the PHY TX control value. */
1375 static u16 b43_antenna_to_phyctl(int antenna)
1376 {
1377         switch (antenna) {
1378         case B43_ANTENNA0:
1379                 return B43_TXH_PHY_ANT0;
1380         case B43_ANTENNA1:
1381                 return B43_TXH_PHY_ANT1;
1382         case B43_ANTENNA2:
1383                 return B43_TXH_PHY_ANT2;
1384         case B43_ANTENNA3:
1385                 return B43_TXH_PHY_ANT3;
1386         case B43_ANTENNA_AUTO:
1387                 return B43_TXH_PHY_ANT01AUTO;
1388         }
1389         B43_WARN_ON(1);
1390         return 0;
1391 }
1392
1393 static void b43_write_beacon_template(struct b43_wldev *dev,
1394                                       u16 ram_offset,
1395                                       u16 shm_size_offset)
1396 {
1397         unsigned int i, len, variable_len;
1398         const struct ieee80211_mgmt *bcn;
1399         const u8 *ie;
1400         bool tim_found = 0;
1401         unsigned int rate;
1402         u16 ctl;
1403         int antenna;
1404         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
1405
1406         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1407         len = min((size_t) dev->wl->current_beacon->len,
1408                   0x200 - sizeof(struct b43_plcp_hdr6));
1409         rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
1410
1411         b43_write_template_common(dev, (const u8 *)bcn,
1412                                   len, ram_offset, shm_size_offset, rate);
1413
1414         /* Write the PHY TX control parameters. */
1415         antenna = b43_antenna_from_ieee80211(dev, info->antenna_sel_tx);
1416         antenna = b43_antenna_to_phyctl(antenna);
1417         ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
1418         /* We can't send beacons with short preamble. Would get PHY errors. */
1419         ctl &= ~B43_TXH_PHY_SHORTPRMBL;
1420         ctl &= ~B43_TXH_PHY_ANT;
1421         ctl &= ~B43_TXH_PHY_ENC;
1422         ctl |= antenna;
1423         if (b43_is_cck_rate(rate))
1424                 ctl |= B43_TXH_PHY_ENC_CCK;
1425         else
1426                 ctl |= B43_TXH_PHY_ENC_OFDM;
1427         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
1428
1429         /* Find the position of the TIM and the DTIM_period value
1430          * and write them to SHM. */
1431         ie = bcn->u.beacon.variable;
1432         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1433         for (i = 0; i < variable_len - 2; ) {
1434                 uint8_t ie_id, ie_len;
1435
1436                 ie_id = ie[i];
1437                 ie_len = ie[i + 1];
1438                 if (ie_id == 5) {
1439                         u16 tim_position;
1440                         u16 dtim_period;
1441                         /* This is the TIM Information Element */
1442
1443                         /* Check whether the ie_len is in the beacon data range. */
1444                         if (variable_len < ie_len + 2 + i)
1445                                 break;
1446                         /* A valid TIM is at least 4 bytes long. */
1447                         if (ie_len < 4)
1448                                 break;
1449                         tim_found = 1;
1450
1451                         tim_position = sizeof(struct b43_plcp_hdr6);
1452                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1453                         tim_position += i;
1454
1455                         dtim_period = ie[i + 3];
1456
1457                         b43_shm_write16(dev, B43_SHM_SHARED,
1458                                         B43_SHM_SH_TIMBPOS, tim_position);
1459                         b43_shm_write16(dev, B43_SHM_SHARED,
1460                                         B43_SHM_SH_DTIMPER, dtim_period);
1461                         break;
1462                 }
1463                 i += ie_len + 2;
1464         }
1465         if (!tim_found) {
1466                 /*
1467                  * If ucode wants to modify TIM do it behind the beacon, this
1468                  * will happen, for example, when doing mesh networking.
1469                  */
1470                 b43_shm_write16(dev, B43_SHM_SHARED,
1471                                 B43_SHM_SH_TIMBPOS,
1472                                 len + sizeof(struct b43_plcp_hdr6));
1473                 b43_shm_write16(dev, B43_SHM_SHARED,
1474                                 B43_SHM_SH_DTIMPER, 0);
1475         }
1476         b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
1477 }
1478
1479 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
1480                                       u16 shm_offset, u16 size,
1481                                       struct ieee80211_rate *rate)
1482 {
1483         struct b43_plcp_hdr4 plcp;
1484         u32 tmp;
1485         __le16 dur;
1486
1487         plcp.data = 0;
1488         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
1489         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1490                                                dev->wl->vif, size,
1491                                                rate);
1492         /* Write PLCP in two parts and timing for packet transfer */
1493         tmp = le32_to_cpu(plcp.data);
1494         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
1495         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
1496         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
1497 }
1498
1499 /* Instead of using custom probe response template, this function
1500  * just patches custom beacon template by:
1501  * 1) Changing packet type
1502  * 2) Patching duration field
1503  * 3) Stripping TIM
1504  */
1505 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
1506                                           u16 *dest_size,
1507                                           struct ieee80211_rate *rate)
1508 {
1509         const u8 *src_data;
1510         u8 *dest_data;
1511         u16 src_size, elem_size, src_pos, dest_pos;
1512         __le16 dur;
1513         struct ieee80211_hdr *hdr;
1514         size_t ie_start;
1515
1516         src_size = dev->wl->current_beacon->len;
1517         src_data = (const u8 *)dev->wl->current_beacon->data;
1518
1519         /* Get the start offset of the variable IEs in the packet. */
1520         ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1521         B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
1522
1523         if (B43_WARN_ON(src_size < ie_start))
1524                 return NULL;
1525
1526         dest_data = kmalloc(src_size, GFP_ATOMIC);
1527         if (unlikely(!dest_data))
1528                 return NULL;
1529
1530         /* Copy the static data and all Information Elements, except the TIM. */
1531         memcpy(dest_data, src_data, ie_start);
1532         src_pos = ie_start;
1533         dest_pos = ie_start;
1534         for ( ; src_pos < src_size - 2; src_pos += elem_size) {
1535                 elem_size = src_data[src_pos + 1] + 2;
1536                 if (src_data[src_pos] == 5) {
1537                         /* This is the TIM. */
1538                         continue;
1539                 }
1540                 memcpy(dest_data + dest_pos, src_data + src_pos,
1541                        elem_size);
1542                 dest_pos += elem_size;
1543         }
1544         *dest_size = dest_pos;
1545         hdr = (struct ieee80211_hdr *)dest_data;
1546
1547         /* Set the frame control. */
1548         hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1549                                          IEEE80211_STYPE_PROBE_RESP);
1550         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1551                                                dev->wl->vif, *dest_size,
1552                                                rate);
1553         hdr->duration_id = dur;
1554
1555         return dest_data;
1556 }
1557
1558 static void b43_write_probe_resp_template(struct b43_wldev *dev,
1559                                           u16 ram_offset,
1560                                           u16 shm_size_offset,
1561                                           struct ieee80211_rate *rate)
1562 {
1563         const u8 *probe_resp_data;
1564         u16 size;
1565
1566         size = dev->wl->current_beacon->len;
1567         probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
1568         if (unlikely(!probe_resp_data))
1569                 return;
1570
1571         /* Looks like PLCP headers plus packet timings are stored for
1572          * all possible basic rates
1573          */
1574         b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
1575         b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
1576         b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
1577         b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
1578
1579         size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
1580         b43_write_template_common(dev, probe_resp_data,
1581                                   size, ram_offset, shm_size_offset,
1582                                   rate->hw_value);
1583         kfree(probe_resp_data);
1584 }
1585
1586 static void b43_upload_beacon0(struct b43_wldev *dev)
1587 {
1588         struct b43_wl *wl = dev->wl;
1589
1590         if (wl->beacon0_uploaded)
1591                 return;
1592         b43_write_beacon_template(dev, 0x68, 0x18);
1593         /* FIXME: Probe resp upload doesn't really belong here,
1594          *        but we don't use that feature anyway. */
1595         b43_write_probe_resp_template(dev, 0x268, 0x4A,
1596                                       &__b43_ratetable[3]);
1597         wl->beacon0_uploaded = 1;
1598 }
1599
1600 static void b43_upload_beacon1(struct b43_wldev *dev)
1601 {
1602         struct b43_wl *wl = dev->wl;
1603
1604         if (wl->beacon1_uploaded)
1605                 return;
1606         b43_write_beacon_template(dev, 0x468, 0x1A);
1607         wl->beacon1_uploaded = 1;
1608 }
1609
1610 static void handle_irq_beacon(struct b43_wldev *dev)
1611 {
1612         struct b43_wl *wl = dev->wl;
1613         u32 cmd, beacon0_valid, beacon1_valid;
1614
1615         if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) &&
1616             !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
1617                 return;
1618
1619         /* This is the bottom half of the asynchronous beacon update. */
1620
1621         /* Ignore interrupt in the future. */
1622         dev->irq_savedstate &= ~B43_IRQ_BEACON;
1623
1624         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1625         beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
1626         beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
1627
1628         /* Schedule interrupt manually, if busy. */
1629         if (beacon0_valid && beacon1_valid) {
1630                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
1631                 dev->irq_savedstate |= B43_IRQ_BEACON;
1632                 return;
1633         }
1634
1635         if (unlikely(wl->beacon_templates_virgin)) {
1636                 /* We never uploaded a beacon before.
1637                  * Upload both templates now, but only mark one valid. */
1638                 wl->beacon_templates_virgin = 0;
1639                 b43_upload_beacon0(dev);
1640                 b43_upload_beacon1(dev);
1641                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1642                 cmd |= B43_MACCMD_BEACON0_VALID;
1643                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1644         } else {
1645                 if (!beacon0_valid) {
1646                         b43_upload_beacon0(dev);
1647                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1648                         cmd |= B43_MACCMD_BEACON0_VALID;
1649                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1650                 } else if (!beacon1_valid) {
1651                         b43_upload_beacon1(dev);
1652                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1653                         cmd |= B43_MACCMD_BEACON1_VALID;
1654                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1655                 }
1656         }
1657 }
1658
1659 static void b43_beacon_update_trigger_work(struct work_struct *work)
1660 {
1661         struct b43_wl *wl = container_of(work, struct b43_wl,
1662                                          beacon_update_trigger);
1663         struct b43_wldev *dev;
1664
1665         mutex_lock(&wl->mutex);
1666         dev = wl->current_dev;
1667         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
1668                 spin_lock_irq(&wl->irq_lock);
1669                 /* update beacon right away or defer to irq */
1670                 dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1671                 handle_irq_beacon(dev);
1672                 /* The handler might have updated the IRQ mask. */
1673                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
1674                             dev->irq_savedstate);
1675                 mmiowb();
1676                 spin_unlock_irq(&wl->irq_lock);
1677         }
1678         mutex_unlock(&wl->mutex);
1679 }
1680
1681 /* Asynchronously update the packet templates in template RAM.
1682  * Locking: Requires wl->irq_lock to be locked. */
1683 static void b43_update_templates(struct b43_wl *wl)
1684 {
1685         struct sk_buff *beacon;
1686
1687         /* This is the top half of the ansynchronous beacon update.
1688          * The bottom half is the beacon IRQ.
1689          * Beacon update must be asynchronous to avoid sending an
1690          * invalid beacon. This can happen for example, if the firmware
1691          * transmits a beacon while we are updating it. */
1692
1693         /* We could modify the existing beacon and set the aid bit in
1694          * the TIM field, but that would probably require resizing and
1695          * moving of data within the beacon template.
1696          * Simply request a new beacon and let mac80211 do the hard work. */
1697         beacon = ieee80211_beacon_get(wl->hw, wl->vif);
1698         if (unlikely(!beacon))
1699                 return;
1700
1701         if (wl->current_beacon)
1702                 dev_kfree_skb_any(wl->current_beacon);
1703         wl->current_beacon = beacon;
1704         wl->beacon0_uploaded = 0;
1705         wl->beacon1_uploaded = 0;
1706         queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
1707 }
1708
1709 static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
1710 {
1711         u32 tmp;
1712         u16 i, len;
1713
1714         len = min((u16) ssid_len, (u16) 0x100);
1715         for (i = 0; i < len; i += sizeof(u32)) {
1716                 tmp = (u32) (ssid[i + 0]);
1717                 if (i + 1 < len)
1718                         tmp |= (u32) (ssid[i + 1]) << 8;
1719                 if (i + 2 < len)
1720                         tmp |= (u32) (ssid[i + 2]) << 16;
1721                 if (i + 3 < len)
1722                         tmp |= (u32) (ssid[i + 3]) << 24;
1723                 b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp);
1724         }
1725         b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len);
1726 }
1727
1728 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1729 {
1730         b43_time_lock(dev);
1731         if (dev->dev->id.revision >= 3) {
1732                 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
1733                 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
1734         } else {
1735                 b43_write16(dev, 0x606, (beacon_int >> 6));
1736                 b43_write16(dev, 0x610, beacon_int);
1737         }
1738         b43_time_unlock(dev);
1739         b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
1740 }
1741
1742 static void b43_handle_firmware_panic(struct b43_wldev *dev)
1743 {
1744         u16 reason;
1745
1746         /* Read the register that contains the reason code for the panic. */
1747         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
1748         b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);
1749
1750         switch (reason) {
1751         default:
1752                 b43dbg(dev->wl, "The panic reason is unknown.\n");
1753                 /* fallthrough */
1754         case B43_FWPANIC_DIE:
1755                 /* Do not restart the controller or firmware.
1756                  * The device is nonfunctional from now on.
1757                  * Restarting would result in this panic to trigger again,
1758                  * so we avoid that recursion. */
1759                 break;
1760         case B43_FWPANIC_RESTART:
1761                 b43_controller_restart(dev, "Microcode panic");
1762                 break;
1763         }
1764 }
1765
1766 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1767 {
1768         unsigned int i, cnt;
1769         u16 reason, marker_id, marker_line;
1770         __le16 *buf;
1771
1772         /* The proprietary firmware doesn't have this IRQ. */
1773         if (!dev->fw.opensource)
1774                 return;
1775
1776         /* Read the register that contains the reason code for this IRQ. */
1777         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);
1778
1779         switch (reason) {
1780         case B43_DEBUGIRQ_PANIC:
1781                 b43_handle_firmware_panic(dev);
1782                 break;
1783         case B43_DEBUGIRQ_DUMP_SHM:
1784                 if (!B43_DEBUG)
1785                         break; /* Only with driver debugging enabled. */
1786                 buf = kmalloc(4096, GFP_ATOMIC);
1787                 if (!buf) {
1788                         b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
1789                         goto out;
1790                 }
1791                 for (i = 0; i < 4096; i += 2) {
1792                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
1793                         buf[i / 2] = cpu_to_le16(tmp);
1794                 }
1795                 b43info(dev->wl, "Shared memory dump:\n");
1796                 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
1797                                16, 2, buf, 4096, 1);
1798                 kfree(buf);
1799                 break;
1800         case B43_DEBUGIRQ_DUMP_REGS:
1801                 if (!B43_DEBUG)
1802                         break; /* Only with driver debugging enabled. */
1803                 b43info(dev->wl, "Microcode register dump:\n");
1804                 for (i = 0, cnt = 0; i < 64; i++) {
1805                         u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
1806                         if (cnt == 0)
1807                                 printk(KERN_INFO);
1808                         printk("r%02u: 0x%04X  ", i, tmp);
1809                         cnt++;
1810                         if (cnt == 6) {
1811                                 printk("\n");
1812                                 cnt = 0;
1813                         }
1814                 }
1815                 printk("\n");
1816                 break;
1817         case B43_DEBUGIRQ_MARKER:
1818                 if (!B43_DEBUG)
1819                         break; /* Only with driver debugging enabled. */
1820                 marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
1821                                            B43_MARKER_ID_REG);
1822                 marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
1823                                              B43_MARKER_LINE_REG);
1824                 b43info(dev->wl, "The firmware just executed the MARKER(%u) "
1825                         "at line number %u\n",
1826                         marker_id, marker_line);
1827                 break;
1828         default:
1829                 b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
1830                        reason);
1831         }
1832 out:
1833         /* Acknowledge the debug-IRQ, so the firmware can continue. */
1834         b43_shm_write16(dev, B43_SHM_SCRATCH,
1835                         B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
1836 }
1837
1838 /* Interrupt handler bottom-half */
1839 static void b43_interrupt_tasklet(struct b43_wldev *dev)
1840 {
1841         u32 reason;
1842         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1843         u32 merged_dma_reason = 0;
1844         int i;
1845         unsigned long flags;
1846
1847         spin_lock_irqsave(&dev->wl->irq_lock, flags);
1848
1849         B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
1850
1851         reason = dev->irq_reason;
1852         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1853                 dma_reason[i] = dev->dma_reason[i];
1854                 merged_dma_reason |= dma_reason[i];
1855         }
1856
1857         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1858                 b43err(dev->wl, "MAC transmission error\n");
1859
1860         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1861                 b43err(dev->wl, "PHY transmission error\n");
1862                 rmb();
1863                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1864                         atomic_set(&dev->phy.txerr_cnt,
1865                                    B43_PHY_TX_BADNESS_LIMIT);
1866                         b43err(dev->wl, "Too many PHY TX errors, "
1867                                         "restarting the controller\n");
1868                         b43_controller_restart(dev, "PHY TX errors");
1869                 }
1870         }
1871
1872         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1873                                           B43_DMAIRQ_NONFATALMASK))) {
1874                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1875                         b43err(dev->wl, "Fatal DMA error: "
1876                                "0x%08X, 0x%08X, 0x%08X, "
1877                                "0x%08X, 0x%08X, 0x%08X\n",
1878                                dma_reason[0], dma_reason[1],
1879                                dma_reason[2], dma_reason[3],
1880                                dma_reason[4], dma_reason[5]);
1881                         b43_controller_restart(dev, "DMA error");
1882                         mmiowb();
1883                         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1884                         return;
1885                 }
1886                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1887                         b43err(dev->wl, "DMA error: "
1888                                "0x%08X, 0x%08X, 0x%08X, "
1889                                "0x%08X, 0x%08X, 0x%08X\n",
1890                                dma_reason[0], dma_reason[1],
1891                                dma_reason[2], dma_reason[3],
1892                                dma_reason[4], dma_reason[5]);
1893                 }
1894         }
1895
1896         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1897                 handle_irq_ucode_debug(dev);
1898         if (reason & B43_IRQ_TBTT_INDI)
1899                 handle_irq_tbtt_indication(dev);
1900         if (reason & B43_IRQ_ATIM_END)
1901                 handle_irq_atim_end(dev);
1902         if (reason & B43_IRQ_BEACON)
1903                 handle_irq_beacon(dev);
1904         if (reason & B43_IRQ_PMQ)
1905                 handle_irq_pmq(dev);
1906         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1907                 ;/* TODO */
1908         if (reason & B43_IRQ_NOISESAMPLE_OK)
1909                 handle_irq_noise(dev);
1910
1911         /* Check the DMA reason registers for received data. */
1912         if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
1913                 if (b43_using_pio_transfers(dev))
1914                         b43_pio_rx(dev->pio.rx_queue);
1915                 else
1916                         b43_dma_rx(dev->dma.rx_ring);
1917         }
1918         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1919         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1920         B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
1921         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1922         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1923
1924         if (reason & B43_IRQ_TX_OK)
1925                 handle_irq_transmit_status(dev);
1926
1927         b43_interrupt_enable(dev, dev->irq_savedstate);
1928         mmiowb();
1929         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1930 }
1931
1932 static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
1933 {
1934         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
1935
1936         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
1937         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
1938         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
1939         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
1940         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
1941         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
1942 }
1943
1944 /* Interrupt handler top-half */
1945 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
1946 {
1947         irqreturn_t ret = IRQ_NONE;
1948         struct b43_wldev *dev = dev_id;
1949         u32 reason;
1950
1951         if (!dev)
1952                 return IRQ_NONE;
1953
1954         spin_lock(&dev->wl->irq_lock);
1955
1956         if (b43_status(dev) < B43_STAT_STARTED)
1957                 goto out;
1958         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1959         if (reason == 0xffffffff)       /* shared IRQ */
1960                 goto out;
1961         ret = IRQ_HANDLED;
1962         reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1963         if (!reason)
1964                 goto out;
1965
1966         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1967             & 0x0001DC00;
1968         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1969             & 0x0000DC00;
1970         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
1971             & 0x0000DC00;
1972         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
1973             & 0x0001DC00;
1974         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
1975             & 0x0000DC00;
1976         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
1977             & 0x0000DC00;
1978
1979         b43_interrupt_ack(dev, reason);
1980         /* disable all IRQs. They are enabled again in the bottom half. */
1981         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
1982         /* save the reason code and call our bottom half. */
1983         dev->irq_reason = reason;
1984         tasklet_schedule(&dev->isr_tasklet);
1985       out:
1986         mmiowb();
1987         spin_unlock(&dev->wl->irq_lock);
1988
1989         return ret;
1990 }
1991
1992 static void do_release_fw(struct b43_firmware_file *fw)
1993 {
1994         release_firmware(fw->data);
1995         fw->data = NULL;
1996         fw->filename = NULL;
1997 }
1998
1999 static void b43_release_firmware(struct b43_wldev *dev)
2000 {
2001         do_release_fw(&dev->fw.ucode);
2002         do_release_fw(&dev->fw.pcm);
2003         do_release_fw(&dev->fw.initvals);
2004         do_release_fw(&dev->fw.initvals_band);
2005 }
2006
2007 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
2008 {
2009         const char *text;
2010
2011         text = "You must go to "
2012                "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
2013                "and download the latest firmware (version 4).\n";
2014         if (error)
2015                 b43err(wl, text);
2016         else
2017                 b43warn(wl, text);
2018 }
2019
2020 static int do_request_fw(struct b43_wldev *dev,
2021                          const char *name,
2022                          struct b43_firmware_file *fw,
2023                          bool silent)
2024 {
2025         char path[sizeof(modparam_fwpostfix) + 32];
2026         const struct firmware *blob;
2027         struct b43_fw_header *hdr;
2028         u32 size;
2029         int err;
2030
2031         if (!name) {
2032                 /* Don't fetch anything. Free possibly cached firmware. */
2033                 do_release_fw(fw);
2034                 return 0;
2035         }
2036         if (fw->filename) {
2037                 if (strcmp(fw->filename, name) == 0)
2038                         return 0; /* Already have this fw. */
2039                 /* Free the cached firmware first. */
2040                 do_release_fw(fw);
2041         }
2042
2043         snprintf(path, ARRAY_SIZE(path),
2044                  "b43%s/%s.fw",
2045                  modparam_fwpostfix, name);
2046         err = request_firmware(&blob, path, dev->dev->dev);
2047         if (err == -ENOENT) {
2048                 if (!silent) {
2049                         b43err(dev->wl, "Firmware file \"%s\" not found\n",
2050                                path);
2051                 }
2052                 return err;
2053         } else if (err) {
2054                 b43err(dev->wl, "Firmware file \"%s\" request failed (err=%d)\n",
2055                        path, err);
2056                 return err;
2057         }
2058         if (blob->size < sizeof(struct b43_fw_header))
2059                 goto err_format;
2060         hdr = (struct b43_fw_header *)(blob->data);
2061         switch (hdr->type) {
2062         case B43_FW_TYPE_UCODE:
2063         case B43_FW_TYPE_PCM:
2064                 size = be32_to_cpu(hdr->size);
2065                 if (size != blob->size - sizeof(struct b43_fw_header))
2066                         goto err_format;
2067                 /* fallthrough */
2068         case B43_FW_TYPE_IV:
2069                 if (hdr->ver != 1)
2070                         goto err_format;
2071                 break;
2072         default:
2073                 goto err_format;
2074         }
2075
2076         fw->data = blob;
2077         fw->filename = name;
2078
2079         return 0;
2080
2081 err_format:
2082         b43err(dev->wl, "Firmware file \"%s\" format error.\n", path);
2083         release_firmware(blob);
2084
2085         return -EPROTO;
2086 }
2087
2088 static int b43_request_firmware(struct b43_wldev *dev)
2089 {
2090         struct b43_firmware *fw = &dev->fw;
2091         const u8 rev = dev->dev->id.revision;
2092         const char *filename;
2093         u32 tmshigh;
2094         int err;
2095
2096         /* Get microcode */
2097         tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
2098         if ((rev >= 5) && (rev <= 10))
2099                 filename = "ucode5";
2100         else if ((rev >= 11) && (rev <= 12))
2101                 filename = "ucode11";
2102         else if (rev >= 13)
2103                 filename = "ucode13";
2104         else
2105                 goto err_no_ucode;
2106         err = do_request_fw(dev, filename, &fw->ucode, 0);
2107         if (err)
2108                 goto err_load;
2109
2110         /* Get PCM code */
2111         if ((rev >= 5) && (rev <= 10))
2112                 filename = "pcm5";
2113         else if (rev >= 11)
2114                 filename = NULL;
2115         else
2116                 goto err_no_pcm;
2117         fw->pcm_request_failed = 0;
2118         err = do_request_fw(dev, filename, &fw->pcm, 1);
2119         if (err == -ENOENT) {
2120                 /* We did not find a PCM file? Not fatal, but
2121                  * core rev <= 10 must do without hwcrypto then. */
2122                 fw->pcm_request_failed = 1;
2123         } else if (err)
2124                 goto err_load;
2125
2126         /* Get initvals */
2127         switch (dev->phy.type) {
2128         case B43_PHYTYPE_A:
2129                 if ((rev >= 5) && (rev <= 10)) {
2130                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
2131                                 filename = "a0g1initvals5";
2132                         else
2133                                 filename = "a0g0initvals5";
2134                 } else
2135                         goto err_no_initvals;
2136                 break;
2137         case B43_PHYTYPE_G:
2138                 if ((rev >= 5) && (rev <= 10))
2139                         filename = "b0g0initvals5";
2140                 else if (rev >= 13)
2141                         filename = "b0g0initvals13";
2142                 else
2143                         goto err_no_initvals;
2144                 break;
2145         case B43_PHYTYPE_N:
2146                 if ((rev >= 11) && (rev <= 12))
2147                         filename = "n0initvals11";
2148                 else
2149                         goto err_no_initvals;
2150                 break;
2151         default:
2152                 goto err_no_initvals;
2153         }
2154         err = do_request_fw(dev, filename, &fw->initvals, 0);
2155         if (err)
2156                 goto err_load;
2157
2158         /* Get bandswitch initvals */
2159         switch (dev->phy.type) {
2160         case B43_PHYTYPE_A:
2161                 if ((rev >= 5) && (rev <= 10)) {
2162                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
2163                                 filename = "a0g1bsinitvals5";
2164                         else
2165                                 filename = "a0g0bsinitvals5";
2166                 } else if (rev >= 11)
2167                         filename = NULL;
2168                 else
2169                         goto err_no_initvals;
2170                 break;
2171         case B43_PHYTYPE_G:
2172                 if ((rev >= 5) && (rev <= 10))
2173                         filename = "b0g0bsinitvals5";
2174                 else if (rev >= 11)
2175                         filename = NULL;
2176                 else
2177                         goto err_no_initvals;
2178                 break;
2179         case B43_PHYTYPE_N:
2180                 if ((rev >= 11) && (rev <= 12))
2181                         filename = "n0bsinitvals11";
2182                 else
2183                         goto err_no_initvals;
2184                 break;
2185         default:
2186                 goto err_no_initvals;
2187         }
2188         err = do_request_fw(dev, filename, &fw->initvals_band, 0);
2189         if (err)
2190                 goto err_load;
2191
2192         return 0;
2193
2194 err_load:
2195         b43_print_fw_helptext(dev->wl, 1);
2196         goto error;
2197
2198 err_no_ucode:
2199         err = -ENODEV;
2200         b43err(dev->wl, "No microcode available for core rev %u\n", rev);
2201         goto error;
2202
2203 err_no_pcm:
2204         err = -ENODEV;
2205         b43err(dev->wl, "No PCM available for core rev %u\n", rev);
2206         goto error;
2207
2208 err_no_initvals:
2209         err = -ENODEV;
2210         b43err(dev->wl, "No Initial Values firmware file for PHY %u, "
2211                "core rev %u\n", dev->phy.type, rev);
2212         goto error;
2213
2214 error:
2215         b43_release_firmware(dev);
2216         return err;
2217 }
2218
2219 static int b43_upload_microcode(struct b43_wldev *dev)
2220 {
2221         const size_t hdr_len = sizeof(struct b43_fw_header);
2222         const __be32 *data;
2223         unsigned int i, len;
2224         u16 fwrev, fwpatch, fwdate, fwtime;
2225         u32 tmp, macctl;
2226         int err = 0;
2227
2228         /* Jump the microcode PSM to offset 0 */
2229         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2230         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
2231         macctl |= B43_MACCTL_PSM_JMP0;
2232         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2233         /* Zero out all microcode PSM registers and shared memory. */
2234         for (i = 0; i < 64; i++)
2235                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
2236         for (i = 0; i < 4096; i += 2)
2237                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
2238
2239         /* Upload Microcode. */
2240         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
2241         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
2242         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
2243         for (i = 0; i < len; i++) {
2244                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2245                 udelay(10);
2246         }
2247
2248         if (dev->fw.pcm.data) {
2249                 /* Upload PCM data. */
2250                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
2251                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
2252                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
2253                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
2254                 /* No need for autoinc bit in SHM_HW */
2255                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
2256                 for (i = 0; i < len; i++) {
2257                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2258                         udelay(10);
2259                 }
2260         }
2261
2262         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
2263
2264         /* Start the microcode PSM */
2265         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2266         macctl &= ~B43_MACCTL_PSM_JMP0;
2267         macctl |= B43_MACCTL_PSM_RUN;
2268         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2269
2270         /* Wait for the microcode to load and respond */
2271         i = 0;
2272         while (1) {
2273                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2274                 if (tmp == B43_IRQ_MAC_SUSPENDED)
2275                         break;
2276                 i++;
2277                 if (i >= 20) {
2278                         b43err(dev->wl, "Microcode not responding\n");
2279                         b43_print_fw_helptext(dev->wl, 1);
2280                         err = -ENODEV;
2281                         goto error;
2282                 }
2283                 msleep_interruptible(50);
2284                 if (signal_pending(current)) {
2285                         err = -EINTR;
2286                         goto error;
2287                 }
2288         }
2289         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
2290
2291         /* Get and check the revisions. */
2292         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
2293         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
2294         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
2295         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
2296
2297         if (fwrev <= 0x128) {
2298                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
2299                        "binary drivers older than version 4.x is unsupported. "
2300                        "You must upgrade your firmware files.\n");
2301                 b43_print_fw_helptext(dev->wl, 1);
2302                 err = -EOPNOTSUPP;
2303                 goto error;
2304         }
2305         dev->fw.rev = fwrev;
2306         dev->fw.patch = fwpatch;
2307         dev->fw.opensource = (fwdate == 0xFFFF);
2308
2309         if (dev->fw.opensource) {
2310                 /* Patchlevel info is encoded in the "time" field. */
2311                 dev->fw.patch = fwtime;
2312                 b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
2313                         dev->fw.rev, dev->fw.patch,
2314                         dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
2315         } else {
2316                 b43info(dev->wl, "Loading firmware version %u.%u "
2317                         "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
2318                         fwrev, fwpatch,
2319                         (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
2320                         (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
2321                 if (dev->fw.pcm_request_failed) {
2322                         b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
2323                                 "Hardware accelerated cryptography is disabled.\n");
2324                         b43_print_fw_helptext(dev->wl, 0);
2325                 }
2326         }
2327
2328         if (b43_is_old_txhdr_format(dev)) {
2329                 b43warn(dev->wl, "You are using an old firmware image. "
2330                         "Support for old firmware will be removed in July 2008.\n");
2331                 b43_print_fw_helptext(dev->wl, 0);
2332         }
2333
2334         return 0;
2335
2336 error:
2337         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2338         macctl &= ~B43_MACCTL_PSM_RUN;
2339         macctl |= B43_MACCTL_PSM_JMP0;
2340         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2341
2342         return err;
2343 }
2344
2345 static int b43_write_initvals(struct b43_wldev *dev,
2346                               const struct b43_iv *ivals,
2347                               size_t count,
2348                               size_t array_size)
2349 {
2350         const struct b43_iv *iv;
2351         u16 offset;
2352         size_t i;
2353         bool bit32;
2354
2355         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
2356         iv = ivals;
2357         for (i = 0; i < count; i++) {
2358                 if (array_size < sizeof(iv->offset_size))
2359                         goto err_format;
2360                 array_size -= sizeof(iv->offset_size);
2361                 offset = be16_to_cpu(iv->offset_size);
2362                 bit32 = !!(offset & B43_IV_32BIT);
2363                 offset &= B43_IV_OFFSET_MASK;
2364                 if (offset >= 0x1000)
2365                         goto err_format;
2366                 if (bit32) {
2367                         u32 value;
2368
2369                         if (array_size < sizeof(iv->data.d32))
2370                                 goto err_format;
2371                         array_size -= sizeof(iv->data.d32);
2372
2373                         value = get_unaligned_be32(&iv->data.d32);
2374                         b43_write32(dev, offset, value);
2375
2376                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2377                                                         sizeof(__be16) +
2378                                                         sizeof(__be32));
2379                 } else {
2380                         u16 value;
2381
2382                         if (array_size < sizeof(iv->data.d16))
2383                                 goto err_format;
2384                         array_size -= sizeof(iv->data.d16);
2385
2386                         value = be16_to_cpu(iv->data.d16);
2387                         b43_write16(dev, offset, value);
2388
2389                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2390                                                         sizeof(__be16) +
2391                                                         sizeof(__be16));
2392                 }
2393         }
2394         if (array_size)
2395                 goto err_format;
2396
2397         return 0;
2398
2399 err_format:
2400         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
2401         b43_print_fw_helptext(dev->wl, 1);
2402
2403         return -EPROTO;
2404 }
2405
2406 static int b43_upload_initvals(struct b43_wldev *dev)
2407 {
2408         const size_t hdr_len = sizeof(struct b43_fw_header);
2409         const struct b43_fw_header *hdr;
2410         struct b43_firmware *fw = &dev->fw;
2411         const struct b43_iv *ivals;
2412         size_t count;
2413         int err;
2414
2415         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
2416         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
2417         count = be32_to_cpu(hdr->size);
2418         err = b43_write_initvals(dev, ivals, count,
2419                                  fw->initvals.data->size - hdr_len);
2420         if (err)
2421                 goto out;
2422         if (fw->initvals_band.data) {
2423                 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
2424                 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
2425                 count = be32_to_cpu(hdr->size);
2426                 err = b43_write_initvals(dev, ivals, count,
2427                                          fw->initvals_band.data->size - hdr_len);
2428                 if (err)
2429                         goto out;
2430         }
2431 out:
2432
2433         return err;
2434 }
2435
2436 /* Initialize the GPIOs
2437  * http://bcm-specs.sipsolutions.net/GPIO
2438  */
2439 static int b43_gpio_init(struct b43_wldev *dev)
2440 {
2441         struct ssb_bus *bus = dev->dev->bus;
2442         struct ssb_device *gpiodev, *pcidev = NULL;
2443         u32 mask, set;
2444
2445         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2446                     & ~B43_MACCTL_GPOUTSMSK);
2447
2448         b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
2449                     | 0x000F);
2450
2451         mask = 0x0000001F;
2452         set = 0x0000000F;
2453         if (dev->dev->bus->chip_id == 0x4301) {
2454                 mask |= 0x0060;
2455                 set |= 0x0060;
2456         }
2457         if (0 /* FIXME: conditional unknown */ ) {
2458                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2459                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2460                             | 0x0100);
2461                 mask |= 0x0180;
2462                 set |= 0x0180;
2463         }
2464         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
2465                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2466                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2467                             | 0x0200);
2468                 mask |= 0x0200;
2469                 set |= 0x0200;
2470         }
2471         if (dev->dev->id.revision >= 2)
2472                 mask |= 0x0010; /* FIXME: This is redundant. */
2473
2474 #ifdef CONFIG_SSB_DRIVER_PCICORE
2475         pcidev = bus->pcicore.dev;
2476 #endif
2477         gpiodev = bus->chipco.dev ? : pcidev;
2478         if (!gpiodev)
2479                 return 0;
2480         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2481                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2482                      & mask) | set);
2483
2484         return 0;
2485 }
2486
2487 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2488 static void b43_gpio_cleanup(struct b43_wldev *dev)
2489 {
2490         struct ssb_bus *bus = dev->dev->bus;
2491         struct ssb_device *gpiodev, *pcidev = NULL;
2492
2493 #ifdef CONFIG_SSB_DRIVER_PCICORE
2494         pcidev = bus->pcicore.dev;
2495 #endif
2496         gpiodev = bus->chipco.dev ? : pcidev;
2497         if (!gpiodev)
2498                 return;
2499         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2500 }
2501
2502 /* http://bcm-specs.sipsolutions.net/EnableMac */
2503 void b43_mac_enable(struct b43_wldev *dev)
2504 {
2505         if (b43_debug(dev, B43_DBG_FIRMWARE)) {
2506                 u16 fwstate;
2507
2508                 fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
2509                                          B43_SHM_SH_UCODESTAT);
2510                 if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
2511                     (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
2512                         b43err(dev->wl, "b43_mac_enable(): The firmware "
2513                                "should be suspended, but current state is %u\n",
2514                                fwstate);
2515                 }
2516         }
2517
2518         dev->mac_suspended--;
2519         B43_WARN_ON(dev->mac_suspended < 0);
2520         if (dev->mac_suspended == 0) {
2521                 b43_write32(dev, B43_MMIO_MACCTL,
2522                             b43_read32(dev, B43_MMIO_MACCTL)
2523                             | B43_MACCTL_ENABLED);
2524                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2525                             B43_IRQ_MAC_SUSPENDED);
2526                 /* Commit writes */
2527                 b43_read32(dev, B43_MMIO_MACCTL);
2528                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2529                 b43_power_saving_ctl_bits(dev, 0);
2530         }
2531 }
2532
2533 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2534 void b43_mac_suspend(struct b43_wldev *dev)
2535 {
2536         int i;
2537         u32 tmp;
2538
2539         might_sleep();
2540         B43_WARN_ON(dev->mac_suspended < 0);
2541
2542         if (dev->mac_suspended == 0) {
2543                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2544                 b43_write32(dev, B43_MMIO_MACCTL,
2545                             b43_read32(dev, B43_MMIO_MACCTL)
2546                             & ~B43_MACCTL_ENABLED);
2547                 /* force pci to flush the write */
2548                 b43_read32(dev, B43_MMIO_MACCTL);
2549                 for (i = 35; i; i--) {
2550                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2551                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2552                                 goto out;
2553                         udelay(10);
2554                 }
2555                 /* Hm, it seems this will take some time. Use msleep(). */
2556                 for (i = 40; i; i--) {
2557                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2558                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2559                                 goto out;
2560                         msleep(1);
2561                 }
2562                 b43err(dev->wl, "MAC suspend failed\n");
2563         }
2564 out:
2565         dev->mac_suspended++;
2566 }
2567
2568 static void b43_adjust_opmode(struct b43_wldev *dev)
2569 {
2570         struct b43_wl *wl = dev->wl;
2571         u32 ctl;
2572         u16 cfp_pretbtt;
2573
2574         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2575         /* Reset status to STA infrastructure mode. */
2576         ctl &= ~B43_MACCTL_AP;
2577         ctl &= ~B43_MACCTL_KEEP_CTL;
2578         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2579         ctl &= ~B43_MACCTL_KEEP_BAD;
2580         ctl &= ~B43_MACCTL_PROMISC;
2581         ctl &= ~B43_MACCTL_BEACPROMISC;
2582         ctl |= B43_MACCTL_INFRA;
2583
2584         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
2585             b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
2586                 ctl |= B43_MACCTL_AP;
2587         else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
2588                 ctl &= ~B43_MACCTL_INFRA;
2589
2590         if (wl->filter_flags & FIF_CONTROL)
2591                 ctl |= B43_MACCTL_KEEP_CTL;
2592         if (wl->filter_flags & FIF_FCSFAIL)
2593                 ctl |= B43_MACCTL_KEEP_BAD;
2594         if (wl->filter_flags & FIF_PLCPFAIL)
2595                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2596         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2597                 ctl |= B43_MACCTL_PROMISC;
2598         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2599                 ctl |= B43_MACCTL_BEACPROMISC;
2600
2601         /* Workaround: On old hardware the HW-MAC-address-filter
2602          * doesn't work properly, so always run promisc in filter
2603          * it in software. */
2604         if (dev->dev->id.revision <= 4)
2605                 ctl |= B43_MACCTL_PROMISC;
2606
2607         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2608
2609         cfp_pretbtt = 2;
2610         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2611                 if (dev->dev->bus->chip_id == 0x4306 &&
2612                     dev->dev->bus->chip_rev == 3)
2613                         cfp_pretbtt = 100;
2614                 else
2615                         cfp_pretbtt = 50;
2616         }
2617         b43_write16(dev, 0x612, cfp_pretbtt);
2618 }
2619
2620 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2621 {
2622         u16 offset;
2623
2624         if (is_ofdm) {
2625                 offset = 0x480;
2626                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2627         } else {
2628                 offset = 0x4C0;
2629                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2630         }
2631         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2632                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2633 }
2634
2635 static void b43_rate_memory_init(struct b43_wldev *dev)
2636 {
2637         switch (dev->phy.type) {
2638         case B43_PHYTYPE_A:
2639         case B43_PHYTYPE_G:
2640         case B43_PHYTYPE_N:
2641                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2642                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2643                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2644                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2645                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2646                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2647                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2648                 if (dev->phy.type == B43_PHYTYPE_A)
2649                         break;
2650                 /* fallthrough */
2651         case B43_PHYTYPE_B:
2652                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2653                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2654                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2655                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2656                 break;
2657         default:
2658                 B43_WARN_ON(1);
2659         }
2660 }
2661
2662 /* Set the default values for the PHY TX Control Words. */
2663 static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
2664 {
2665         u16 ctl = 0;
2666
2667         ctl |= B43_TXH_PHY_ENC_CCK;
2668         ctl |= B43_TXH_PHY_ANT01AUTO;
2669         ctl |= B43_TXH_PHY_TXPWR;
2670
2671         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
2672         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
2673         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
2674 }
2675
2676 /* Set the TX-Antenna for management frames sent by firmware. */
2677 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
2678 {
2679         u16 ant;
2680         u16 tmp;
2681
2682         ant = b43_antenna_to_phyctl(antenna);
2683
2684         /* For ACK/CTS */
2685         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
2686         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2687         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
2688         /* For Probe Resposes */
2689         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
2690         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2691         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
2692 }
2693
2694 /* This is the opposite of b43_chip_init() */
2695 static void b43_chip_exit(struct b43_wldev *dev)
2696 {
2697         b43_gpio_cleanup(dev);
2698         /* firmware is released later */
2699 }
2700
2701 /* Initialize the chip
2702  * http://bcm-specs.sipsolutions.net/ChipInit
2703  */
2704 static int b43_chip_init(struct b43_wldev *dev)
2705 {
2706         struct b43_phy *phy = &dev->phy;
2707         int err;
2708         u32 value32, macctl;
2709         u16 value16;
2710
2711         /* Initialize the MAC control */
2712         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
2713         if (dev->phy.gmode)
2714                 macctl |= B43_MACCTL_GMODE;
2715         macctl |= B43_MACCTL_INFRA;
2716         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2717
2718         err = b43_request_firmware(dev);
2719         if (err)
2720                 goto out;
2721         err = b43_upload_microcode(dev);
2722         if (err)
2723                 goto out;       /* firmware is released later */
2724
2725         err = b43_gpio_init(dev);
2726         if (err)
2727                 goto out;       /* firmware is released later */
2728
2729         err = b43_upload_initvals(dev);
2730         if (err)
2731                 goto err_gpio_clean;
2732
2733         b43_write16(dev, 0x03E6, 0x0000);
2734         err = b43_phy_init(dev);
2735         if (err)
2736                 goto err_gpio_clean;
2737
2738         /* Disable Interference Mitigation. */
2739         if (phy->ops->interf_mitigation)
2740                 phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
2741
2742         /* Select the antennae */
2743         if (phy->ops->set_rx_antenna)
2744                 phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
2745         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
2746
2747         if (phy->type == B43_PHYTYPE_B) {
2748                 value16 = b43_read16(dev, 0x005E);
2749                 value16 |= 0x0004;
2750                 b43_write16(dev, 0x005E, value16);
2751         }
2752         b43_write32(dev, 0x0100, 0x01000000);
2753         if (dev->dev->id.revision < 5)
2754                 b43_write32(dev, 0x010C, 0x01000000);
2755
2756         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2757                     & ~B43_MACCTL_INFRA);
2758         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2759                     | B43_MACCTL_INFRA);
2760
2761         /* Probe Response Timeout value */
2762         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
2763         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
2764
2765         /* Initially set the wireless operation mode. */
2766         b43_adjust_opmode(dev);
2767
2768         if (dev->dev->id.revision < 3) {
2769                 b43_write16(dev, 0x060E, 0x0000);
2770                 b43_write16(dev, 0x0610, 0x8000);
2771                 b43_write16(dev, 0x0604, 0x0000);
2772                 b43_write16(dev, 0x0606, 0x0200);
2773         } else {
2774                 b43_write32(dev, 0x0188, 0x80000000);
2775                 b43_write32(dev, 0x018C, 0x02000000);
2776         }
2777         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
2778         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
2779         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
2780         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
2781         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
2782         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
2783         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
2784
2785         value32 = ssb_read32(dev->dev, SSB_TMSLOW);
2786         value32 |= 0x00100000;
2787         ssb_write32(dev->dev, SSB_TMSLOW, value32);
2788
2789         b43_write16(dev, B43_MMIO_POWERUP_DELAY,
2790                     dev->dev->bus->chipco.fast_pwrup_delay);
2791
2792         err = 0;
2793         b43dbg(dev->wl, "Chip initialized\n");
2794 out:
2795         return err;
2796
2797 err_gpio_clean:
2798         b43_gpio_cleanup(dev);
2799         return err;
2800 }
2801
2802 static void b43_periodic_every60sec(struct b43_wldev *dev)
2803 {
2804         const struct b43_phy_operations *ops = dev->phy.ops;
2805
2806         if (ops->pwork_60sec)
2807                 ops->pwork_60sec(dev);
2808
2809         /* Force check the TX power emission now. */
2810         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
2811 }
2812
2813 static void b43_periodic_every30sec(struct b43_wldev *dev)
2814 {
2815         /* Update device statistics. */
2816         b43_calculate_link_quality(dev);
2817 }
2818
2819 static void b43_periodic_every15sec(struct b43_wldev *dev)
2820 {
2821         struct b43_phy *phy = &dev->phy;
2822         u16 wdr;
2823
2824         if (dev->fw.opensource) {
2825                 /* Check if the firmware is still alive.
2826                  * It will reset the watchdog counter to 0 in its idle loop. */
2827                 wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
2828                 if (unlikely(wdr)) {
2829                         b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
2830                         b43_controller_restart(dev, "Firmware watchdog");
2831                         return;
2832                 } else {
2833                         b43_shm_write16(dev, B43_SHM_SCRATCH,
2834                                         B43_WATCHDOG_REG, 1);
2835                 }
2836         }
2837
2838         if (phy->ops->pwork_15sec)
2839                 phy->ops->pwork_15sec(dev);
2840
2841         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
2842         wmb();
2843 }
2844
2845 static void do_periodic_work(struct b43_wldev *dev)
2846 {
2847         unsigned int state;
2848
2849         state = dev->periodic_state;
2850         if (state % 4 == 0)
2851                 b43_periodic_every60sec(dev);
2852         if (state % 2 == 0)
2853                 b43_periodic_every30sec(dev);
2854         b43_periodic_every15sec(dev);
2855 }
2856
2857 /* Periodic work locking policy:
2858  *      The whole periodic work handler is protected by
2859  *      wl->mutex. If another lock is needed somewhere in the
2860  *      pwork callchain, it's aquired in-place, where it's needed.
2861  */
2862 static void b43_periodic_work_handler(struct work_struct *work)
2863 {
2864         struct b43_wldev *dev = container_of(work, struct b43_wldev,
2865                                              periodic_work.work);
2866         struct b43_wl *wl = dev->wl;
2867         unsigned long delay;
2868
2869         mutex_lock(&wl->mutex);
2870
2871         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
2872                 goto out;
2873         if (b43_debug(dev, B43_DBG_PWORK_STOP))
2874                 goto out_requeue;
2875
2876         do_periodic_work(dev);
2877
2878         dev->periodic_state++;
2879 out_requeue:
2880         if (b43_debug(dev, B43_DBG_PWORK_FAST))
2881                 delay = msecs_to_jiffies(50);
2882         else
2883                 delay = round_jiffies_relative(HZ * 15);
2884         queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
2885 out:
2886         mutex_unlock(&wl->mutex);
2887 }
2888
2889 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
2890 {
2891         struct delayed_work *work = &dev->periodic_work;
2892
2893         dev->periodic_state = 0;
2894         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
2895         queue_delayed_work(dev->wl->hw->workqueue, work, 0);
2896 }
2897
2898 /* Check if communication with the device works correctly. */
2899 static int b43_validate_chipaccess(struct b43_wldev *dev)
2900 {
2901         u32 v, backup;
2902
2903         backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
2904
2905         /* Check for read/write and endianness problems. */
2906         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
2907         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
2908                 goto error;
2909         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
2910         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
2911                 goto error;
2912
2913         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
2914
2915         if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
2916                 /* The 32bit register shadows the two 16bit registers
2917                  * with update sideeffects. Validate this. */
2918                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
2919                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
2920                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
2921                         goto error;
2922                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
2923                         goto error;
2924         }
2925         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
2926
2927         v = b43_read32(dev, B43_MMIO_MACCTL);
2928         v |= B43_MACCTL_GMODE;
2929         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
2930                 goto error;
2931
2932         return 0;
2933 error:
2934         b43err(dev->wl, "Failed to validate the chipaccess\n");
2935         return -ENODEV;
2936 }
2937
2938 static void b43_security_init(struct b43_wldev *dev)
2939 {
2940         dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
2941         B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
2942         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
2943         /* KTP is a word address, but we address SHM bytewise.
2944          * So multiply by two.
2945          */
2946         dev->ktp *= 2;
2947         if (dev->dev->id.revision >= 5) {
2948                 /* Number of RCMTA address slots */
2949                 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
2950         }
2951         b43_clear_keys(dev);
2952 }
2953
2954 static int b43_rng_read(struct hwrng *rng, u32 * data)
2955 {
2956         struct b43_wl *wl = (struct b43_wl *)rng->priv;
2957         unsigned long flags;
2958
2959         /* Don't take wl->mutex here, as it could deadlock with
2960          * hwrng internal locking. It's not needed to take
2961          * wl->mutex here, anyway. */
2962
2963         spin_lock_irqsave(&wl->irq_lock, flags);
2964         *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
2965         spin_unlock_irqrestore(&wl->irq_lock, flags);
2966
2967         return (sizeof(u16));
2968 }
2969
2970 static void b43_rng_exit(struct b43_wl *wl)
2971 {
2972         if (wl->rng_initialized)
2973                 hwrng_unregister(&wl->rng);
2974 }
2975
2976 static int b43_rng_init(struct b43_wl *wl)
2977 {
2978         int err;
2979
2980         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
2981                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
2982         wl->rng.name = wl->rng_name;
2983         wl->rng.data_read = b43_rng_read;
2984         wl->rng.priv = (unsigned long)wl;
2985         wl->rng_initialized = 1;
2986         err = hwrng_register(&wl->rng);
2987         if (err) {
2988                 wl->rng_initialized = 0;
2989                 b43err(wl, "Failed to register the random "
2990                        "number generator (%d)\n", err);
2991         }
2992
2993         return err;
2994 }
2995
2996 static int b43_op_tx(struct ieee80211_hw *hw,
2997                      struct sk_buff *skb)
2998 {
2999         struct b43_wl *wl = hw_to_b43_wl(hw);
3000         struct b43_wldev *dev = wl->current_dev;
3001         unsigned long flags;
3002         int err;
3003
3004         if (unlikely(skb->len < 2 + 2 + 6)) {
3005                 /* Too short, this can't be a valid frame. */
3006                 goto drop_packet;
3007         }
3008         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
3009         if (unlikely(!dev))
3010                 goto drop_packet;
3011
3012         /* Transmissions on seperate queues can run concurrently. */
3013         read_lock_irqsave(&wl->tx_lock, flags);
3014
3015         err = -ENODEV;
3016         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
3017                 if (b43_using_pio_transfers(dev))
3018                         err = b43_pio_tx(dev, skb);
3019                 else
3020                         err = b43_dma_tx(dev, skb);
3021         }
3022
3023         read_unlock_irqrestore(&wl->tx_lock, flags);
3024
3025         if (unlikely(err))
3026                 goto drop_packet;
3027         return NETDEV_TX_OK;
3028
3029 drop_packet:
3030         /* We can not transmit this packet. Drop it. */
3031         dev_kfree_skb_any(skb);
3032         return NETDEV_TX_OK;
3033 }
3034
3035 /* Locking: wl->irq_lock */
3036 static void b43_qos_params_upload(struct b43_wldev *dev,
3037                                   const struct ieee80211_tx_queue_params *p,
3038                                   u16 shm_offset)
3039 {
3040         u16 params[B43_NR_QOSPARAMS];
3041         int bslots, tmp;
3042         unsigned int i;
3043
3044         bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
3045
3046         memset(&params, 0, sizeof(params));
3047
3048         params[B43_QOSPARAM_TXOP] = p->txop * 32;
3049         params[B43_QOSPARAM_CWMIN] = p->cw_min;
3050         params[B43_QOSPARAM_CWMAX] = p->cw_max;
3051         params[B43_QOSPARAM_CWCUR] = p->cw_min;
3052         params[B43_QOSPARAM_AIFS] = p->aifs;
3053         params[B43_QOSPARAM_BSLOTS] = bslots;
3054         params[B43_QOSPARAM_REGGAP] = bslots + p->aifs;
3055
3056         for (i = 0; i < ARRAY_SIZE(params); i++) {
3057                 if (i == B43_QOSPARAM_STATUS) {
3058                         tmp = b43_shm_read16(dev, B43_SHM_SHARED,
3059                                              shm_offset + (i * 2));
3060                         /* Mark the parameters as updated. */
3061                         tmp |= 0x100;
3062                         b43_shm_write16(dev, B43_SHM_SHARED,
3063                                         shm_offset + (i * 2),
3064                                         tmp);
3065                 } else {
3066                         b43_shm_write16(dev, B43_SHM_SHARED,
3067                                         shm_offset + (i * 2),
3068                                         params[i]);
3069                 }
3070         }
3071 }
3072
3073 /* Update the QOS parameters in hardware. */
3074 static void b43_qos_update(struct b43_wldev *dev)
3075 {
3076         struct b43_wl *wl = dev->wl;
3077         struct b43_qos_params *params;
3078         unsigned long flags;
3079         unsigned int i;
3080
3081         /* Mapping of mac80211 queues to b43 SHM offsets. */
3082         static const u16 qos_shm_offsets[] = {
3083                 [0] = B43_QOS_VOICE,
3084                 [1] = B43_QOS_VIDEO,
3085                 [2] = B43_QOS_BESTEFFORT,
3086                 [3] = B43_QOS_BACKGROUND,
3087         };
3088         BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params));
3089
3090         b43_mac_suspend(dev);
3091         spin_lock_irqsave(&wl->irq_lock, flags);
3092
3093         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3094                 params = &(wl->qos_params[i]);
3095                 if (params->need_hw_update) {
3096                         b43_qos_params_upload(dev, &(params->p),
3097                                               qos_shm_offsets[i]);
3098                         params->need_hw_update = 0;
3099                 }
3100         }
3101
3102         spin_unlock_irqrestore(&wl->irq_lock, flags);
3103         b43_mac_enable(dev);
3104 }
3105
3106 static void b43_qos_clear(struct b43_wl *wl)
3107 {
3108         struct b43_qos_params *params;
3109         unsigned int i;
3110
3111         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3112                 params = &(wl->qos_params[i]);
3113
3114                 memset(&(params->p), 0, sizeof(params->p));
3115                 params->p.aifs = -1;
3116                 params->need_hw_update = 1;
3117         }
3118 }
3119
3120 /* Initialize the core's QOS capabilities */
3121 static void b43_qos_init(struct b43_wldev *dev)
3122 {
3123         struct b43_wl *wl = dev->wl;
3124         unsigned int i;
3125
3126         /* Upload the current QOS parameters. */
3127         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++)
3128                 wl->qos_params[i].need_hw_update = 1;
3129         b43_qos_update(dev);
3130
3131         /* Enable QOS support. */
3132         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
3133         b43_write16(dev, B43_MMIO_IFSCTL,
3134                     b43_read16(dev, B43_MMIO_IFSCTL)
3135                     | B43_MMIO_IFSCTL_USE_EDCF);
3136 }
3137
3138 static void b43_qos_update_work(struct work_struct *work)
3139 {
3140         struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work);
3141         struct b43_wldev *dev;
3142
3143         mutex_lock(&wl->mutex);
3144         dev = wl->current_dev;
3145         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED)))
3146                 b43_qos_update(dev);
3147         mutex_unlock(&wl->mutex);
3148 }
3149
3150 static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
3151                           const struct ieee80211_tx_queue_params *params)
3152 {
3153         struct b43_wl *wl = hw_to_b43_wl(hw);
3154         unsigned long flags;
3155         unsigned int queue = (unsigned int)_queue;
3156         struct b43_qos_params *p;
3157
3158         if (queue >= ARRAY_SIZE(wl->qos_params)) {
3159                 /* Queue not available or don't support setting
3160                  * params on this queue. Return success to not
3161                  * confuse mac80211. */
3162                 return 0;
3163         }
3164
3165         spin_lock_irqsave(&wl->irq_lock, flags);
3166         p = &(wl->qos_params[queue]);
3167         memcpy(&(p->p), params, sizeof(p->p));
3168         p->need_hw_update = 1;
3169         spin_unlock_irqrestore(&wl->irq_lock, flags);
3170
3171         queue_work(hw->workqueue, &wl->qos_update_work);
3172
3173         return 0;
3174 }
3175
3176 static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
3177                                struct ieee80211_tx_queue_stats *stats)
3178 {
3179         struct b43_wl *wl = hw_to_b43_wl(hw);
3180         struct b43_wldev *dev = wl->current_dev;
3181         unsigned long flags;
3182         int err = -ENODEV;
3183
3184         if (!dev)
3185                 goto out;
3186         spin_lock_irqsave(&wl->irq_lock, flags);
3187         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
3188                 if (b43_using_pio_transfers(dev))
3189                         b43_pio_get_tx_stats(dev, stats);
3190                 else
3191                         b43_dma_get_tx_stats(dev, stats);
3192                 err = 0;
3193         }
3194         spin_unlock_irqrestore(&wl->irq_lock, flags);
3195 out:
3196         return err;
3197 }
3198
3199 static int b43_op_get_stats(struct ieee80211_hw *hw,
3200                             struct ieee80211_low_level_stats *stats)
3201 {
3202         struct b43_wl *wl = hw_to_b43_wl(hw);
3203         unsigned long flags;
3204
3205         spin_lock_irqsave(&wl->irq_lock, flags);
3206         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
3207         spin_unlock_irqrestore(&wl->irq_lock, flags);
3208
3209         return 0;
3210 }
3211
3212 static void b43_put_phy_into_reset(struct b43_wldev *dev)
3213 {
3214         struct ssb_device *sdev = dev->dev;
3215         u32 tmslow;
3216
3217         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3218         tmslow &= ~B43_TMSLOW_GMODE;
3219         tmslow |= B43_TMSLOW_PHYRESET;
3220         tmslow |= SSB_TMSLOW_FGC;
3221         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3222         msleep(1);
3223
3224         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3225         tmslow &= ~SSB_TMSLOW_FGC;
3226         tmslow |= B43_TMSLOW_PHYRESET;
3227         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3228         msleep(1);
3229 }
3230
3231 static const char * band_to_string(enum ieee80211_band band)
3232 {
3233         switch (band) {
3234         case IEEE80211_BAND_5GHZ:
3235                 return "5";
3236         case IEEE80211_BAND_2GHZ:
3237                 return "2.4";
3238         default:
3239                 break;
3240         }
3241         B43_WARN_ON(1);
3242         return "";
3243 }
3244
3245 /* Expects wl->mutex locked */
3246 static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
3247 {
3248         struct b43_wldev *up_dev = NULL;
3249         struct b43_wldev *down_dev;
3250         struct b43_wldev *d;
3251         int err;
3252         bool gmode;
3253         int prev_status;
3254
3255         /* Find a device and PHY which supports the band. */
3256         list_for_each_entry(d, &wl->devlist, list) {
3257                 switch (chan->band) {
3258                 case IEEE80211_BAND_5GHZ:
3259                         if (d->phy.supports_5ghz) {
3260                                 up_dev = d;
3261                                 gmode = 0;
3262                         }
3263                         break;
3264                 case IEEE80211_BAND_2GHZ:
3265                         if (d->phy.supports_2ghz) {
3266                                 up_dev = d;
3267                                 gmode = 1;
3268                         }
3269                         break;
3270                 default:
3271                         B43_WARN_ON(1);
3272                         return -EINVAL;
3273                 }
3274                 if (up_dev)
3275                         break;
3276         }
3277         if (!up_dev) {
3278                 b43err(wl, "Could not find a device for %s-GHz band operation\n",
3279                        band_to_string(chan->band));
3280                 return -ENODEV;
3281         }
3282         if ((up_dev == wl->current_dev) &&
3283             (!!wl->current_dev->phy.gmode == !!gmode)) {
3284                 /* This device is already running. */
3285                 return 0;
3286         }
3287         b43dbg(wl, "Switching to %s-GHz band\n",
3288                band_to_string(chan->band));
3289         down_dev = wl->current_dev;
3290
3291         prev_status = b43_status(down_dev);
3292         /* Shutdown the currently running core. */
3293         if (prev_status >= B43_STAT_STARTED)
3294                 b43_wireless_core_stop(down_dev);
3295         if (prev_status >= B43_STAT_INITIALIZED)
3296                 b43_wireless_core_exit(down_dev);
3297
3298         if (down_dev != up_dev) {
3299                 /* We switch to a different core, so we put PHY into
3300                  * RESET on the old core. */
3301                 b43_put_phy_into_reset(down_dev);
3302         }
3303
3304         /* Now start the new core. */
3305         up_dev->phy.gmode = gmode;
3306         if (prev_status >= B43_STAT_INITIALIZED) {
3307                 err = b43_wireless_core_init(up_dev);
3308                 if (err) {
3309                         b43err(wl, "Fatal: Could not initialize device for "
3310                                "selected %s-GHz band\n",
3311                                band_to_string(chan->band));
3312                         goto init_failure;
3313                 }
3314         }
3315         if (prev_status >= B43_STAT_STARTED) {
3316                 err = b43_wireless_core_start(up_dev);
3317                 if (err) {
3318                         b43err(wl, "Fatal: Coult not start device for "
3319                                "selected %s-GHz band\n",
3320                                band_to_string(chan->band));
3321                         b43_wireless_core_exit(up_dev);
3322                         goto init_failure;
3323                 }
3324         }
3325         B43_WARN_ON(b43_status(up_dev) != prev_status);
3326
3327         wl->current_dev = up_dev;
3328
3329         return 0;
3330 init_failure:
3331         /* Whoops, failed to init the new core. No core is operating now. */
3332         wl->current_dev = NULL;
3333         return err;
3334 }
3335
3336 static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
3337 {
3338         struct b43_wl *wl = hw_to_b43_wl(hw);
3339         struct b43_wldev *dev;
3340         struct b43_phy *phy;
3341         unsigned long flags;
3342         int antenna;
3343         int err = 0;
3344         u32 savedirqs;
3345
3346         mutex_lock(&wl->mutex);
3347
3348         /* Switch the band (if necessary). This might change the active core. */
3349         err = b43_switch_band(wl, conf->channel);
3350         if (err)
3351                 goto out_unlock_mutex;
3352         dev = wl->current_dev;
3353         phy = &dev->phy;
3354
3355         /* Disable IRQs while reconfiguring the device.
3356          * This makes it possible to drop the spinlock throughout
3357          * the reconfiguration process. */
3358         spin_lock_irqsave(&wl->irq_lock, flags);
3359         if (b43_status(dev) < B43_STAT_STARTED) {
3360                 spin_unlock_irqrestore(&wl->irq_lock, flags);
3361                 goto out_unlock_mutex;
3362         }
3363         savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
3364         spin_unlock_irqrestore(&wl->irq_lock, flags);
3365         b43_synchronize_irq(dev);
3366
3367         /* Switch to the requested channel.
3368          * The firmware takes care of races with the TX handler. */
3369         if (conf->channel->hw_value != phy->channel)
3370                 b43_switch_channel(dev, conf->channel->hw_value);
3371
3372         /* Enable/Disable ShortSlot timing. */
3373         if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
3374             dev->short_slot) {
3375                 B43_WARN_ON(phy->type != B43_PHYTYPE_G);
3376                 if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
3377                         b43_short_slot_timing_enable(dev);
3378                 else
3379                         b43_short_slot_timing_disable(dev);
3380         }
3381
3382         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
3383
3384         /* Adjust the desired TX power level. */
3385         if (conf->power_level != 0) {
3386                 spin_lock_irqsave(&wl->irq_lock, flags);
3387                 if (conf->power_level != phy->desired_txpower) {
3388                         phy->desired_txpower = conf->power_level;
3389                         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
3390                                                    B43_TXPWR_IGNORE_TSSI);
3391                 }
3392                 spin_unlock_irqrestore(&wl->irq_lock, flags);
3393         }
3394
3395         /* Antennas for RX and management frame TX. */
3396         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
3397         b43_mgmtframe_txantenna(dev, antenna);
3398         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
3399         if (phy->ops->set_rx_antenna)
3400                 phy->ops->set_rx_antenna(dev, antenna);
3401
3402         /* Update templates for AP/mesh mode. */
3403         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
3404             b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
3405                 b43_set_beacon_int(dev, conf->beacon_int);
3406
3407         if (!!conf->radio_enabled != phy->radio_on) {
3408                 if (conf->radio_enabled) {
3409                         b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
3410                         b43info(dev->wl, "Radio turned on by software\n");
3411                         if (!dev->radio_hw_enable) {
3412                                 b43info(dev->wl, "The hardware RF-kill button "
3413                                         "still turns the radio physically off. "
3414                                         "Press the button to turn it on.\n");
3415                         }
3416                 } else {
3417                         b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
3418                         b43info(dev->wl, "Radio turned off by software\n");
3419                 }
3420         }
3421
3422         spin_lock_irqsave(&wl->irq_lock, flags);
3423         b43_interrupt_enable(dev, savedirqs);
3424         mmiowb();
3425         spin_unlock_irqrestore(&wl->irq_lock, flags);
3426       out_unlock_mutex:
3427         mutex_unlock(&wl->mutex);
3428
3429         return err;
3430 }
3431
3432 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3433                            const u8 *local_addr, const u8 *addr,
3434                            struct ieee80211_key_conf *key)
3435 {
3436         struct b43_wl *wl = hw_to_b43_wl(hw);
3437         struct b43_wldev *dev;
3438         unsigned long flags;
3439         u8 algorithm;
3440         u8 index;
3441         int err;
3442         DECLARE_MAC_BUF(mac);
3443
3444         if (modparam_nohwcrypt)
3445                 return -ENOSPC; /* User disabled HW-crypto */
3446
3447         mutex_lock(&wl->mutex);
3448         spin_lock_irqsave(&wl->irq_lock, flags);
3449
3450         dev = wl->current_dev;
3451         err = -ENODEV;
3452         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
3453                 goto out_unlock;
3454
3455         if (dev->fw.pcm_request_failed) {
3456                 /* We don't have firmware for the crypto engine.
3457                  * Must use software-crypto. */
3458                 err = -EOPNOTSUPP;
3459                 goto out_unlock;
3460         }
3461
3462         err = -EINVAL;
3463         switch (key->alg) {
3464         case ALG_WEP:
3465                 if (key->keylen == 5)
3466                         algorithm = B43_SEC_ALGO_WEP40;
3467                 else
3468                         algorithm = B43_SEC_ALGO_WEP104;
3469                 break;
3470         case ALG_TKIP:
3471                 algorithm = B43_SEC_ALGO_TKIP;
3472                 break;
3473         case ALG_CCMP:
3474                 algorithm = B43_SEC_ALGO_AES;
3475                 break;
3476         default:
3477                 B43_WARN_ON(1);
3478                 goto out_unlock;
3479         }
3480         index = (u8) (key->keyidx);
3481         if (index > 3)
3482                 goto out_unlock;
3483
3484         switch (cmd) {
3485         case SET_KEY:
3486                 if (algorithm == B43_SEC_ALGO_TKIP) {
3487                         /* FIXME: No TKIP hardware encryption for now. */
3488                         err = -EOPNOTSUPP;
3489                         goto out_unlock;
3490                 }
3491
3492                 if (is_broadcast_ether_addr(addr)) {
3493                         /* addr is FF:FF:FF:FF:FF:FF for default keys */
3494                         err = b43_key_write(dev, index, algorithm,
3495                                             key->key, key->keylen, NULL, key);
3496                 } else {
3497                         /*
3498                          * either pairwise key or address is 00:00:00:00:00:00
3499                          * for transmit-only keys
3500                          */
3501                         err = b43_key_write(dev, -1, algorithm,
3502                                             key->key, key->keylen, addr, key);
3503                 }
3504                 if (err)
3505                         goto out_unlock;
3506
3507                 if (algorithm == B43_SEC_ALGO_WEP40 ||
3508                     algorithm == B43_SEC_ALGO_WEP104) {
3509                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
3510                 } else {
3511                         b43_hf_write(dev,
3512                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
3513                 }
3514                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3515                 break;
3516         case DISABLE_KEY: {
3517                 err = b43_key_clear(dev, key->hw_key_idx);
3518                 if (err)
3519                         goto out_unlock;
3520                 break;
3521         }
3522         default:
3523                 B43_WARN_ON(1);
3524         }
3525 out_unlock:
3526         spin_unlock_irqrestore(&wl->irq_lock, flags);
3527         mutex_unlock(&wl->mutex);
3528         if (!err) {
3529                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
3530                        "mac: %s\n",
3531                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
3532                        print_mac(mac, addr));
3533         }
3534         return err;
3535 }
3536
3537 static void b43_op_configure_filter(struct ieee80211_hw *hw,
3538                                     unsigned int changed, unsigned int *fflags,
3539                                     int mc_count, struct dev_addr_list *mc_list)
3540 {
3541         struct b43_wl *wl = hw_to_b43_wl(hw);
3542         struct b43_wldev *dev = wl->current_dev;
3543         unsigned long flags;
3544
3545         if (!dev) {
3546                 *fflags = 0;
3547                 return;
3548         }
3549
3550         spin_lock_irqsave(&wl->irq_lock, flags);
3551         *fflags &= FIF_PROMISC_IN_BSS |
3552                   FIF_ALLMULTI |
3553                   FIF_FCSFAIL |
3554                   FIF_PLCPFAIL |
3555                   FIF_CONTROL |
3556                   FIF_OTHER_BSS |
3557                   FIF_BCN_PRBRESP_PROMISC;
3558
3559         changed &= FIF_PROMISC_IN_BSS |
3560                    FIF_ALLMULTI |
3561                    FIF_FCSFAIL |
3562                    FIF_PLCPFAIL |
3563                    FIF_CONTROL |
3564                    FIF_OTHER_BSS |
3565                    FIF_BCN_PRBRESP_PROMISC;
3566
3567         wl->filter_flags = *fflags;
3568
3569         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
3570                 b43_adjust_opmode(dev);
3571         spin_unlock_irqrestore(&wl->irq_lock, flags);
3572 }
3573
3574 static int b43_op_config_interface(struct ieee80211_hw *hw,
3575                                    struct ieee80211_vif *vif,
3576                                    struct ieee80211_if_conf *conf)
3577 {
3578         struct b43_wl *wl = hw_to_b43_wl(hw);
3579         struct b43_wldev *dev = wl->current_dev;
3580         unsigned long flags;
3581
3582         if (!dev)
3583                 return -ENODEV;
3584         mutex_lock(&wl->mutex);
3585         spin_lock_irqsave(&wl->irq_lock, flags);
3586         B43_WARN_ON(wl->vif != vif);
3587         if (conf->bssid)
3588                 memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3589         else
3590                 memset(wl->bssid, 0, ETH_ALEN);
3591         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3592                 if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
3593                     b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) {
3594                         B43_WARN_ON(vif->type != wl->if_type);
3595                         if (conf->changed & IEEE80211_IFCC_SSID)
3596                                 b43_set_ssid(dev, conf->ssid, conf->ssid_len);
3597                         if (conf->changed & IEEE80211_IFCC_BEACON)
3598                                 b43_update_templates(wl);
3599                 } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) {
3600                         if (conf->changed & IEEE80211_IFCC_BEACON)
3601                                 b43_update_templates(wl);
3602                 }
3603                 b43_write_mac_bssid_templates(dev);
3604         }
3605         spin_unlock_irqrestore(&wl->irq_lock, flags);
3606         mutex_unlock(&wl->mutex);
3607
3608         return 0;
3609 }
3610
3611 /* Locking: wl->mutex */
3612 static void b43_wireless_core_stop(struct b43_wldev *dev)
3613 {
3614         struct b43_wl *wl = dev->wl;
3615         unsigned long flags;
3616
3617         if (b43_status(dev) < B43_STAT_STARTED)
3618                 return;
3619
3620         /* Disable and sync interrupts. We must do this before than
3621          * setting the status to INITIALIZED, as the interrupt handler
3622          * won't care about IRQs then. */
3623         spin_lock_irqsave(&wl->irq_lock, flags);
3624         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
3625         b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
3626         spin_unlock_irqrestore(&wl->irq_lock, flags);
3627         b43_synchronize_irq(dev);
3628
3629         write_lock_irqsave(&wl->tx_lock, flags);
3630         b43_set_status(dev, B43_STAT_INITIALIZED);
3631         write_unlock_irqrestore(&wl->tx_lock, flags);
3632
3633         b43_pio_stop(dev);
3634         mutex_unlock(&wl->mutex);
3635         /* Must unlock as it would otherwise deadlock. No races here.
3636          * Cancel the possibly running self-rearming periodic work. */
3637         cancel_delayed_work_sync(&dev->periodic_work);
3638         mutex_lock(&wl->mutex);
3639
3640         b43_mac_suspend(dev);
3641         free_irq(dev->dev->irq, dev);
3642         b43dbg(wl, "Wireless interface stopped\n");
3643 }
3644
3645 /* Locking: wl->mutex */
3646 static int b43_wireless_core_start(struct b43_wldev *dev)
3647 {
3648         int err;
3649
3650         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
3651
3652         drain_txstatus_queue(dev);
3653         err = request_irq(dev->dev->irq, b43_interrupt_handler,
3654                           IRQF_SHARED, KBUILD_MODNAME, dev);
3655         if (err) {
3656                 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
3657                 goto out;
3658         }
3659
3660         /* We are ready to run. */
3661         b43_set_status(dev, B43_STAT_STARTED);
3662
3663         /* Start data flow (TX/RX). */
3664         b43_mac_enable(dev);
3665         b43_interrupt_enable(dev, dev->irq_savedstate);
3666
3667         /* Start maintainance work */
3668         b43_periodic_tasks_setup(dev);
3669
3670         b43dbg(dev->wl, "Wireless interface started\n");
3671       out:
3672         return err;
3673 }
3674
3675 /* Get PHY and RADIO versioning numbers */
3676 static int b43_phy_versioning(struct b43_wldev *dev)
3677 {
3678         struct b43_phy *phy = &dev->phy;
3679         u32 tmp;
3680         u8 analog_type;
3681         u8 phy_type;
3682         u8 phy_rev;
3683         u16 radio_manuf;
3684         u16 radio_ver;
3685         u16 radio_rev;
3686         int unsupported = 0;
3687
3688         /* Get PHY versioning */
3689         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
3690         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
3691         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
3692         phy_rev = (tmp & B43_PHYVER_VERSION);
3693         switch (phy_type) {
3694         case B43_PHYTYPE_A:
3695                 if (phy_rev >= 4)
3696                         unsupported = 1;
3697                 break;
3698         case B43_PHYTYPE_B:
3699                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
3700                     && phy_rev != 7)
3701                         unsupported = 1;
3702                 break;
3703         case B43_PHYTYPE_G:
3704                 if (phy_rev > 9)
3705                         unsupported = 1;
3706                 break;
3707 #ifdef CONFIG_B43_NPHY
3708         case B43_PHYTYPE_N:
3709                 if (phy_rev > 1)
3710                         unsupported = 1;
3711                 break;
3712 #endif
3713         default:
3714                 unsupported = 1;
3715         };
3716         if (unsupported) {
3717                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
3718                        "(Analog %u, Type %u, Revision %u)\n",
3719                        analog_type, phy_type, phy_rev);
3720                 return -EOPNOTSUPP;
3721         }
3722         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
3723                analog_type, phy_type, phy_rev);
3724
3725         /* Get RADIO versioning */
3726         if (dev->dev->bus->chip_id == 0x4317) {
3727                 if (dev->dev->bus->chip_rev == 0)
3728                         tmp = 0x3205017F;
3729                 else if (dev->dev->bus->chip_rev == 1)
3730                         tmp = 0x4205017F;
3731                 else
3732                         tmp = 0x5205017F;
3733         } else {
3734                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3735                 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
3736                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3737                 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
3738         }
3739         radio_manuf = (tmp & 0x00000FFF);
3740         radio_ver = (tmp & 0x0FFFF000) >> 12;
3741         radio_rev = (tmp & 0xF0000000) >> 28;
3742         if (radio_manuf != 0x17F /* Broadcom */)
3743                 unsupported = 1;
3744         switch (phy_type) {
3745         case B43_PHYTYPE_A:
3746                 if (radio_ver != 0x2060)
3747                         unsupported = 1;
3748                 if (radio_rev != 1)
3749                         unsupported = 1;
3750                 if (radio_manuf != 0x17F)
3751                         unsupported = 1;
3752                 break;
3753         case B43_PHYTYPE_B:
3754                 if ((radio_ver & 0xFFF0) != 0x2050)
3755                         unsupported = 1;
3756                 break;
3757         case B43_PHYTYPE_G:
3758                 if (radio_ver != 0x2050)
3759                         unsupported = 1;
3760                 break;
3761         case B43_PHYTYPE_N:
3762                 if (radio_ver != 0x2055)
3763                         unsupported = 1;
3764                 break;
3765         default:
3766                 B43_WARN_ON(1);
3767         }
3768         if (unsupported) {
3769                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
3770                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
3771                        radio_manuf, radio_ver, radio_rev);
3772                 return -EOPNOTSUPP;
3773         }
3774         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
3775                radio_manuf, radio_ver, radio_rev);
3776
3777         phy->radio_manuf = radio_manuf;
3778         phy->radio_ver = radio_ver;
3779         phy->radio_rev = radio_rev;
3780
3781         phy->analog = analog_type;
3782         phy->type = phy_type;
3783         phy->rev = phy_rev;
3784
3785         return 0;
3786 }
3787
3788 static void setup_struct_phy_for_init(struct b43_wldev *dev,
3789                                       struct b43_phy *phy)
3790 {
3791         phy->hardware_power_control = !!modparam_hwpctl;
3792         phy->next_txpwr_check_time = jiffies;
3793         /* PHY TX errors counter. */
3794         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3795 }
3796
3797 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
3798 {
3799         dev->dfq_valid = 0;
3800
3801         /* Assume the radio is enabled. If it's not enabled, the state will
3802          * immediately get fixed on the first periodic work run. */
3803         dev->radio_hw_enable = 1;
3804
3805         /* Stats */
3806         memset(&dev->stats, 0, sizeof(dev->stats));
3807
3808         setup_struct_phy_for_init(dev, &dev->phy);
3809
3810         /* IRQ related flags */
3811         dev->irq_reason = 0;
3812         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
3813         dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
3814
3815         dev->mac_suspended = 1;
3816
3817         /* Noise calculation context */
3818         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
3819 }
3820
3821 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
3822 {
3823         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
3824         u64 hf;
3825
3826         if (!modparam_btcoex)
3827                 return;
3828         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
3829                 return;
3830         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
3831                 return;
3832
3833         hf = b43_hf_read(dev);
3834         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
3835                 hf |= B43_HF_BTCOEXALT;
3836         else
3837                 hf |= B43_HF_BTCOEX;
3838         b43_hf_write(dev, hf);
3839 }
3840
3841 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
3842 {
3843         if (!modparam_btcoex)
3844                 return;
3845         //TODO
3846 }
3847
3848 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
3849 {
3850 #ifdef CONFIG_SSB_DRIVER_PCICORE
3851         struct ssb_bus *bus = dev->dev->bus;
3852         u32 tmp;
3853
3854         if (bus->pcicore.dev &&
3855             bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
3856             bus->pcicore.dev->id.revision <= 5) {
3857                 /* IMCFGLO timeouts workaround. */
3858                 tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
3859                 tmp &= ~SSB_IMCFGLO_REQTO;
3860                 tmp &= ~SSB_IMCFGLO_SERTO;
3861                 switch (bus->bustype) {
3862                 case SSB_BUSTYPE_PCI:
3863                 case SSB_BUSTYPE_PCMCIA:
3864                         tmp |= 0x32;
3865                         break;
3866                 case SSB_BUSTYPE_SSB:
3867                         tmp |= 0x53;
3868                         break;
3869                 }
3870                 ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
3871         }
3872 #endif /* CONFIG_SSB_DRIVER_PCICORE */
3873 }
3874
3875 /* Write the short and long frame retry limit values. */
3876 static void b43_set_retry_limits(struct b43_wldev *dev,
3877                                  unsigned int short_retry,
3878                                  unsigned int long_retry)
3879 {
3880         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3881          * the chip-internal counter. */
3882         short_retry = min(short_retry, (unsigned int)0xF);
3883         long_retry = min(long_retry, (unsigned int)0xF);
3884
3885         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3886                         short_retry);
3887         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3888                         long_retry);
3889 }
3890
3891 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
3892 {
3893         u16 pu_delay;
3894
3895         /* The time value is in microseconds. */
3896         if (dev->phy.type == B43_PHYTYPE_A)
3897                 pu_delay = 3700;
3898         else
3899                 pu_delay = 1050;
3900         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
3901                 pu_delay = 500;
3902         if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
3903                 pu_delay = max(pu_delay, (u16)2400);
3904
3905         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
3906 }
3907
3908 /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
3909 static void b43_set_pretbtt(struct b43_wldev *dev)
3910 {
3911         u16 pretbtt;
3912
3913         /* The time value is in microseconds. */
3914         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
3915                 pretbtt = 2;
3916         } else {
3917                 if (dev->phy.type == B43_PHYTYPE_A)
3918                         pretbtt = 120;
3919                 else
3920                         pretbtt = 250;
3921         }
3922         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
3923         b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
3924 }
3925
3926 /* Shutdown a wireless core */
3927 /* Locking: wl->mutex */
3928 static void b43_wireless_core_exit(struct b43_wldev *dev)
3929 {
3930         u32 macctl;
3931
3932         B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
3933         if (b43_status(dev) != B43_STAT_INITIALIZED)
3934                 return;
3935         b43_set_status(dev, B43_STAT_UNINIT);
3936
3937         /* Stop the microcode PSM. */
3938         macctl = b43_read32(dev, B43_MMIO_MACCTL);
3939         macctl &= ~B43_MACCTL_PSM_RUN;
3940         macctl |= B43_MACCTL_PSM_JMP0;
3941         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3942
3943         if (!dev->suspend_in_progress) {
3944                 b43_leds_exit(dev);
3945                 b43_rng_exit(dev->wl);
3946         }
3947         b43_dma_free(dev);
3948         b43_pio_free(dev);
3949         b43_chip_exit(dev);
3950         b43_switch_analog(dev, 0);
3951         if (dev->wl->current_beacon) {
3952                 dev_kfree_skb_any(dev->wl->current_beacon);
3953                 dev->wl->current_beacon = NULL;
3954         }
3955         b43_phy_exit(dev);
3956
3957         ssb_device_disable(dev->dev, 0);
3958         ssb_bus_may_powerdown(dev->dev->bus);
3959 }
3960
3961 /* Initialize a wireless core */
3962 static int b43_wireless_core_init(struct b43_wldev *dev)
3963 {
3964         struct b43_wl *wl = dev->wl;
3965         struct ssb_bus *bus = dev->dev->bus;
3966         struct ssb_sprom *sprom = &bus->sprom;
3967         struct b43_phy *phy = &dev->phy;
3968         int err;
3969         u64 hf;
3970         u32 tmp;
3971
3972         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3973
3974         err = ssb_bus_powerup(bus, 0);
3975         if (err)
3976                 goto out;
3977         if (!ssb_device_is_enabled(dev->dev)) {
3978                 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
3979                 b43_wireless_core_reset(dev, tmp);
3980         }
3981
3982         setup_struct_wldev_for_init(dev);
3983         err = b43_phy_operations_setup(dev);
3984         if (err)
3985                 goto err_busdown;
3986
3987         /* Enable IRQ routing to this device. */
3988         ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
3989
3990         b43_imcfglo_timeouts_workaround(dev);
3991         b43_bluetooth_coext_disable(dev);
3992         if (phy->ops->prepare) {
3993                 err = phy->ops->prepare(dev);
3994                 if (err)
3995                         goto err_phy_exit;
3996         }
3997         err = b43_chip_init(dev);
3998         if (err)
3999                 goto err_phy_exit;
4000         b43_shm_write16(dev, B43_SHM_SHARED,
4001                         B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
4002         hf = b43_hf_read(dev);
4003         if (phy->type == B43_PHYTYPE_G) {
4004                 hf |= B43_HF_SYMW;
4005                 if (phy->rev == 1)
4006                         hf |= B43_HF_GDCW;
4007                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
4008                         hf |= B43_HF_OFDMPABOOST;
4009         } else if (phy->type == B43_PHYTYPE_B) {
4010                 hf |= B43_HF_SYMW;
4011                 if (phy->rev >= 2 && phy->radio_ver == 0x2050)
4012                         hf &= ~B43_HF_GDCW;
4013         }
4014         b43_hf_write(dev, hf);
4015
4016         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
4017                              B43_DEFAULT_LONG_RETRY_LIMIT);
4018         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
4019         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
4020
4021         /* Disable sending probe responses from firmware.
4022          * Setting the MaxTime to one usec will always trigger
4023          * a timeout, so we never send any probe resp.
4024          * A timeout of zero is infinite. */
4025         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
4026
4027         b43_rate_memory_init(dev);
4028         b43_set_phytxctl_defaults(dev);
4029
4030         /* Minimum Contention Window */
4031         if (phy->type == B43_PHYTYPE_B) {
4032                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
4033         } else {
4034                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
4035         }
4036         /* Maximum Contention Window */
4037         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
4038
4039         if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
4040                 dev->__using_pio_transfers = 1;
4041                 err = b43_pio_init(dev);
4042         } else {
4043                 dev->__using_pio_transfers = 0;
4044                 err = b43_dma_init(dev);
4045         }
4046         if (err)
4047                 goto err_chip_exit;
4048         b43_qos_init(dev);
4049         b43_set_synth_pu_delay(dev, 1);
4050         b43_bluetooth_coext_enable(dev);
4051
4052         ssb_bus_powerup(bus, 1);        /* Enable dynamic PCTL */
4053         b43_upload_card_macaddress(dev);
4054         b43_security_init(dev);
4055         if (!dev->suspend_in_progress)
4056                 b43_rng_init(wl);
4057
4058         b43_set_status(dev, B43_STAT_INITIALIZED);
4059
4060         if (!dev->suspend_in_progress)
4061                 b43_leds_init(dev);
4062 out:
4063         return err;
4064
4065 err_chip_exit:
4066         b43_chip_exit(dev);
4067 err_phy_exit:
4068         b43_phy_exit(dev);
4069 err_busdown:
4070         ssb_bus_may_powerdown(bus);
4071         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4072         return err;
4073 }
4074
4075 static int b43_op_add_interface(struct ieee80211_hw *hw,
4076                                 struct ieee80211_if_init_conf *conf)
4077 {
4078         struct b43_wl *wl = hw_to_b43_wl(hw);
4079         struct b43_wldev *dev;
4080         unsigned long flags;
4081         int err = -EOPNOTSUPP;
4082
4083         /* TODO: allow WDS/AP devices to coexist */
4084
4085         if (conf->type != IEEE80211_IF_TYPE_AP &&
4086             conf->type != IEEE80211_IF_TYPE_MESH_POINT &&
4087             conf->type != IEEE80211_IF_TYPE_STA &&
4088             conf->type != IEEE80211_IF_TYPE_WDS &&
4089             conf->type != IEEE80211_IF_TYPE_IBSS)
4090                 return -EOPNOTSUPP;
4091
4092         mutex_lock(&wl->mutex);
4093         if (wl->operating)
4094                 goto out_mutex_unlock;
4095
4096         b43dbg(wl, "Adding Interface type %d\n", conf->type);
4097
4098         dev = wl->current_dev;
4099         wl->operating = 1;
4100         wl->vif = conf->vif;
4101         wl->if_type = conf->type;
4102         memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
4103
4104         spin_lock_irqsave(&wl->irq_lock, flags);
4105         b43_adjust_opmode(dev);
4106         b43_set_pretbtt(dev);
4107         b43_set_synth_pu_delay(dev, 0);
4108         b43_upload_card_macaddress(dev);
4109         spin_unlock_irqrestore(&wl->irq_lock, flags);
4110
4111         err = 0;
4112  out_mutex_unlock:
4113         mutex_unlock(&wl->mutex);
4114
4115         return err;
4116 }
4117
4118 static void b43_op_remove_interface(struct ieee80211_hw *hw,
4119                                     struct ieee80211_if_init_conf *conf)
4120 {
4121         struct b43_wl *wl = hw_to_b43_wl(hw);
4122         struct b43_wldev *dev = wl->current_dev;
4123         unsigned long flags;
4124
4125         b43dbg(wl, "Removing Interface type %d\n", conf->type);
4126
4127         mutex_lock(&wl->mutex);
4128
4129         B43_WARN_ON(!wl->operating);
4130         B43_WARN_ON(wl->vif != conf->vif);
4131         wl->vif = NULL;
4132
4133         wl->operating = 0;
4134
4135         spin_lock_irqsave(&wl->irq_lock, flags);
4136         b43_adjust_opmode(dev);
4137         memset(wl->mac_addr, 0, ETH_ALEN);
4138         b43_upload_card_macaddress(dev);
4139         spin_unlock_irqrestore(&wl->irq_lock, flags);
4140
4141         mutex_unlock(&wl->mutex);
4142 }
4143
4144 static int b43_op_start(struct ieee80211_hw *hw)
4145 {
4146         struct b43_wl *wl = hw_to_b43_wl(hw);
4147         struct b43_wldev *dev = wl->current_dev;
4148         int did_init = 0;
4149         int err = 0;
4150         bool do_rfkill_exit = 0;
4151
4152         /* Kill all old instance specific information to make sure
4153          * the card won't use it in the short timeframe between start
4154          * and mac80211 reconfiguring it. */
4155         memset(wl->bssid, 0, ETH_ALEN);
4156         memset(wl->mac_addr, 0, ETH_ALEN);
4157         wl->filter_flags = 0;
4158         wl->radiotap_enabled = 0;
4159         b43_qos_clear(wl);
4160         wl->beacon0_uploaded = 0;
4161         wl->beacon1_uploaded = 0;
4162         wl->beacon_templates_virgin = 1;
4163
4164         /* First register RFkill.
4165          * LEDs that are registered later depend on it. */
4166         b43_rfkill_init(dev);
4167
4168         mutex_lock(&wl->mutex);
4169
4170         if (b43_status(dev) < B43_STAT_INITIALIZED) {
4171                 err = b43_wireless_core_init(dev);
4172                 if (err) {
4173                         do_rfkill_exit = 1;
4174                         goto out_mutex_unlock;
4175                 }
4176                 did_init = 1;
4177         }
4178
4179         if (b43_status(dev) < B43_STAT_STARTED) {
4180                 err = b43_wireless_core_start(dev);
4181                 if (err) {
4182                         if (did_init)
4183                                 b43_wireless_core_exit(dev);
4184                         do_rfkill_exit = 1;
4185                         goto out_mutex_unlock;
4186                 }
4187         }
4188
4189  out_mutex_unlock:
4190         mutex_unlock(&wl->mutex);
4191
4192         if (do_rfkill_exit)
4193                 b43_rfkill_exit(dev);
4194
4195         return err;
4196 }
4197
4198 static void b43_op_stop(struct ieee80211_hw *hw)
4199 {
4200         struct b43_wl *wl = hw_to_b43_wl(hw);
4201         struct b43_wldev *dev = wl->current_dev;
4202
4203         b43_rfkill_exit(dev);
4204         cancel_work_sync(&(wl->qos_update_work));
4205         cancel_work_sync(&(wl->beacon_update_trigger));
4206
4207         mutex_lock(&wl->mutex);
4208         if (b43_status(dev) >= B43_STAT_STARTED)
4209                 b43_wireless_core_stop(dev);
4210         b43_wireless_core_exit(dev);
4211         mutex_unlock(&wl->mutex);
4212
4213         cancel_work_sync(&(wl->txpower_adjust_work));
4214 }
4215
4216 static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
4217                                   u32 short_retry_limit, u32 long_retry_limit)
4218 {
4219         struct b43_wl *wl = hw_to_b43_wl(hw);
4220         struct b43_wldev *dev;
4221         int err = 0;
4222
4223         mutex_lock(&wl->mutex);
4224         dev = wl->current_dev;
4225         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
4226                 err = -ENODEV;
4227                 goto out_unlock;
4228         }
4229         b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
4230 out_unlock:
4231         mutex_unlock(&wl->mutex);
4232
4233         return err;
4234 }
4235
4236 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
4237 {
4238         struct b43_wl *wl = hw_to_b43_wl(hw);
4239         unsigned long flags;
4240
4241         spin_lock_irqsave(&wl->irq_lock, flags);
4242         b43_update_templates(wl);
4243         spin_unlock_irqrestore(&wl->irq_lock, flags);
4244
4245         return 0;
4246 }
4247
4248 static void b43_op_sta_notify(struct ieee80211_hw *hw,
4249                               struct ieee80211_vif *vif,
4250                               enum sta_notify_cmd notify_cmd,
4251                               const u8 *addr)
4252 {
4253         struct b43_wl *wl = hw_to_b43_wl(hw);
4254
4255         B43_WARN_ON(!vif || wl->vif != vif);
4256 }
4257
4258 static const struct ieee80211_ops b43_hw_ops = {
4259         .tx                     = b43_op_tx,
4260         .conf_tx                = b43_op_conf_tx,
4261         .add_interface          = b43_op_add_interface,
4262         .remove_interface       = b43_op_remove_interface,
4263         .config                 = b43_op_config,
4264         .config_interface       = b43_op_config_interface,
4265         .configure_filter       = b43_op_configure_filter,
4266         .set_key                = b43_op_set_key,
4267         .get_stats              = b43_op_get_stats,
4268         .get_tx_stats           = b43_op_get_tx_stats,
4269         .start                  = b43_op_start,
4270         .stop                   = b43_op_stop,
4271         .set_retry_limit        = b43_op_set_retry_limit,
4272         .set_tim                = b43_op_beacon_set_tim,
4273         .sta_notify             = b43_op_sta_notify,
4274 };
4275
4276 /* Hard-reset the chip. Do not call this directly.
4277  * Use b43_controller_restart()
4278  */
4279 static void b43_chip_reset(struct work_struct *work)
4280 {
4281         struct b43_wldev *dev =
4282             container_of(work, struct b43_wldev, restart_work);
4283         struct b43_wl *wl = dev->wl;
4284         int err = 0;
4285         int prev_status;
4286
4287         mutex_lock(&wl->mutex);
4288
4289         prev_status = b43_status(dev);
4290         /* Bring the device down... */
4291         if (prev_status >= B43_STAT_STARTED)
4292                 b43_wireless_core_stop(dev);
4293         if (prev_status >= B43_STAT_INITIALIZED)
4294                 b43_wireless_core_exit(dev);
4295
4296         /* ...and up again. */
4297         if (prev_status >= B43_STAT_INITIALIZED) {
4298                 err = b43_wireless_core_init(dev);
4299                 if (err)
4300                         goto out;
4301         }
4302         if (prev_status >= B43_STAT_STARTED) {
4303                 err = b43_wireless_core_start(dev);
4304                 if (err) {
4305                         b43_wireless_core_exit(dev);
4306                         goto out;
4307                 }
4308         }
4309 out:
4310         if (err)
4311                 wl->current_dev = NULL; /* Failed to init the dev. */
4312         mutex_unlock(&wl->mutex);
4313         if (err)
4314                 b43err(wl, "Controller restart FAILED\n");
4315         else
4316                 b43info(wl, "Controller restarted\n");
4317 }
4318
4319 static int b43_setup_bands(struct b43_wldev *dev,
4320                            bool have_2ghz_phy, bool have_5ghz_phy)
4321 {
4322         struct ieee80211_hw *hw = dev->wl->hw;
4323
4324         if (have_2ghz_phy)
4325                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
4326         if (dev->phy.type == B43_PHYTYPE_N) {
4327                 if (have_5ghz_phy)
4328                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
4329         } else {
4330                 if (have_5ghz_phy)
4331                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
4332         }
4333
4334         dev->phy.supports_2ghz = have_2ghz_phy;
4335         dev->phy.supports_5ghz = have_5ghz_phy;
4336
4337         return 0;
4338 }
4339
4340 static void b43_wireless_core_detach(struct b43_wldev *dev)
4341 {
4342         /* We release firmware that late to not be required to re-request
4343          * is all the time when we reinit the core. */
4344         b43_release_firmware(dev);
4345 }
4346
4347 static int b43_wireless_core_attach(struct b43_wldev *dev)
4348 {
4349         struct b43_wl *wl = dev->wl;
4350         struct ssb_bus *bus = dev->dev->bus;
4351         struct pci_dev *pdev = bus->host_pci;
4352         int err;
4353         bool have_2ghz_phy = 0, have_5ghz_phy = 0;
4354         u32 tmp;
4355
4356         /* Do NOT do any device initialization here.
4357          * Do it in wireless_core_init() instead.
4358          * This function is for gathering basic information about the HW, only.
4359          * Also some structs may be set up here. But most likely you want to have
4360          * that in core_init(), too.
4361          */
4362
4363         err = ssb_bus_powerup(bus, 0);
4364         if (err) {
4365                 b43err(wl, "Bus powerup failed\n");
4366                 goto out;
4367         }
4368         /* Get the PHY type. */
4369         if (dev->dev->id.revision >= 5) {
4370                 u32 tmshigh;
4371
4372                 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
4373                 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
4374                 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
4375         } else
4376                 B43_WARN_ON(1);
4377
4378         dev->phy.gmode = have_2ghz_phy;
4379         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4380         b43_wireless_core_reset(dev, tmp);
4381
4382         err = b43_phy_versioning(dev);
4383         if (err)
4384                 goto err_powerdown;
4385         /* Check if this device supports multiband. */
4386         if (!pdev ||
4387             (pdev->device != 0x4312 &&
4388              pdev->device != 0x4319 && pdev->device != 0x4324)) {
4389                 /* No multiband support. */
4390                 have_2ghz_phy = 0;
4391                 have_5ghz_phy = 0;
4392                 switch (dev->phy.type) {
4393                 case B43_PHYTYPE_A:
4394                         have_5ghz_phy = 1;
4395                         break;
4396                 case B43_PHYTYPE_G:
4397                 case B43_PHYTYPE_N:
4398                         have_2ghz_phy = 1;
4399                         break;
4400                 default:
4401                         B43_WARN_ON(1);
4402                 }
4403         }
4404         if (dev->phy.type == B43_PHYTYPE_A) {
4405                 /* FIXME */
4406                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
4407                 err = -EOPNOTSUPP;
4408                 goto err_powerdown;
4409         }
4410         if (1 /* disable A-PHY */) {
4411                 /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
4412                 if (dev->phy.type != B43_PHYTYPE_N) {
4413                         have_2ghz_phy = 1;
4414                         have_5ghz_phy = 0;
4415                 }
4416         }
4417
4418         dev->phy.gmode = have_2ghz_phy;
4419         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4420         b43_wireless_core_reset(dev, tmp);
4421
4422         err = b43_validate_chipaccess(dev);
4423         if (err)
4424                 goto err_powerdown;
4425         err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
4426         if (err)
4427                 goto err_powerdown;
4428
4429         /* Now set some default "current_dev" */
4430         if (!wl->current_dev)
4431                 wl->current_dev = dev;
4432         INIT_WORK(&dev->restart_work, b43_chip_reset);
4433
4434         b43_switch_analog(dev, 0);
4435         ssb_device_disable(dev->dev, 0);
4436         ssb_bus_may_powerdown(bus);
4437
4438 out:
4439         return err;
4440
4441 err_powerdown:
4442         ssb_bus_may_powerdown(bus);
4443         return err;
4444 }
4445
4446 static void b43_one_core_detach(struct ssb_device *dev)
4447 {
4448         struct b43_wldev *wldev;
4449         struct b43_wl *wl;
4450
4451         /* Do not cancel ieee80211-workqueue based work here.
4452          * See comment in b43_remove(). */
4453
4454         wldev = ssb_get_drvdata(dev);
4455         wl = wldev->wl;
4456         b43_debugfs_remove_device(wldev);
4457         b43_wireless_core_detach(wldev);
4458         list_del(&wldev->list);
4459         wl->nr_devs--;
4460         ssb_set_drvdata(dev, NULL);
4461         kfree(wldev);
4462 }
4463
4464 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
4465 {
4466         struct b43_wldev *wldev;
4467         struct pci_dev *pdev;
4468         int err = -ENOMEM;
4469
4470         if (!list_empty(&wl->devlist)) {
4471                 /* We are not the first core on this chip. */
4472                 pdev = dev->bus->host_pci;
4473                 /* Only special chips support more than one wireless
4474                  * core, although some of the other chips have more than
4475                  * one wireless core as well. Check for this and
4476                  * bail out early.
4477                  */
4478                 if (!pdev ||
4479                     ((pdev->device != 0x4321) &&
4480                      (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
4481                         b43dbg(wl, "Ignoring unconnected 802.11 core\n");
4482                         return -ENODEV;
4483                 }
4484         }
4485
4486         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
4487         if (!wldev)
4488                 goto out;
4489
4490         wldev->dev = dev;
4491         wldev->wl = wl;
4492         b43_set_status(wldev, B43_STAT_UNINIT);
4493         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
4494         tasklet_init(&wldev->isr_tasklet,
4495                      (void (*)(unsigned long))b43_interrupt_tasklet,
4496                      (unsigned long)wldev);
4497         INIT_LIST_HEAD(&wldev->list);
4498
4499         err = b43_wireless_core_attach(wldev);
4500         if (err)
4501                 goto err_kfree_wldev;
4502
4503         list_add(&wldev->list, &wl->devlist);
4504         wl->nr_devs++;
4505         ssb_set_drvdata(dev, wldev);
4506         b43_debugfs_add_device(wldev);
4507
4508       out:
4509         return err;
4510
4511       err_kfree_wldev:
4512         kfree(wldev);
4513         return err;
4514 }
4515
4516 #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice)         ( \
4517         (pdev->vendor == PCI_VENDOR_ID_##_vendor) &&                    \
4518         (pdev->device == _device) &&                                    \
4519         (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&       \
4520         (pdev->subsystem_device == _subdevice)                          )
4521
4522 static void b43_sprom_fixup(struct ssb_bus *bus)
4523 {
4524         struct pci_dev *pdev;
4525
4526         /* boardflags workarounds */
4527         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
4528             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
4529                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
4530         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
4531             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
4532                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
4533         if (bus->bustype == SSB_BUSTYPE_PCI) {
4534                 pdev = bus->host_pci;
4535                 if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
4536                     IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
4537                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
4538                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
4539                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
4540                         bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
4541         }
4542 }
4543
4544 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
4545 {
4546         struct ieee80211_hw *hw = wl->hw;
4547
4548         ssb_set_devtypedata(dev, NULL);
4549         ieee80211_free_hw(hw);
4550 }
4551
4552 static int b43_wireless_init(struct ssb_device *dev)
4553 {
4554         struct ssb_sprom *sprom = &dev->bus->sprom;
4555         struct ieee80211_hw *hw;
4556         struct b43_wl *wl;
4557         int err = -ENOMEM;
4558
4559         b43_sprom_fixup(dev->bus);
4560
4561         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
4562         if (!hw) {
4563                 b43err(NULL, "Could not allocate ieee80211 device\n");
4564                 goto out;
4565         }
4566
4567         /* fill hw info */
4568         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
4569                     IEEE80211_HW_SIGNAL_DBM |
4570                     IEEE80211_HW_NOISE_DBM;
4571
4572         hw->wiphy->interface_modes =
4573                 BIT(NL80211_IFTYPE_AP) |
4574                 BIT(NL80211_IFTYPE_MESH_POINT) |
4575                 BIT(NL80211_IFTYPE_STATION) |
4576                 BIT(NL80211_IFTYPE_WDS) |
4577                 BIT(NL80211_IFTYPE_ADHOC);
4578
4579         hw->queues = b43_modparam_qos ? 4 : 1;
4580         SET_IEEE80211_DEV(hw, dev->dev);
4581         if (is_valid_ether_addr(sprom->et1mac))
4582                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
4583         else
4584                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
4585
4586         /* Get and initialize struct b43_wl */
4587         wl = hw_to_b43_wl(hw);
4588         memset(wl, 0, sizeof(*wl));
4589         wl->hw = hw;
4590         spin_lock_init(&wl->irq_lock);
4591         rwlock_init(&wl->tx_lock);
4592         spin_lock_init(&wl->leds_lock);
4593         spin_lock_init(&wl->shm_lock);
4594         mutex_init(&wl->mutex);
4595         INIT_LIST_HEAD(&wl->devlist);
4596         INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
4597         INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
4598         INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
4599
4600         ssb_set_devtypedata(dev, wl);
4601         b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
4602         err = 0;
4603       out:
4604         return err;
4605 }
4606
4607 static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
4608 {
4609         struct b43_wl *wl;
4610         int err;
4611         int first = 0;
4612
4613         wl = ssb_get_devtypedata(dev);
4614         if (!wl) {
4615                 /* Probing the first core. Must setup common struct b43_wl */
4616                 first = 1;
4617                 err = b43_wireless_init(dev);
4618                 if (err)
4619                         goto out;
4620                 wl = ssb_get_devtypedata(dev);
4621                 B43_WARN_ON(!wl);
4622         }
4623         err = b43_one_core_attach(dev, wl);
4624         if (err)
4625                 goto err_wireless_exit;
4626
4627         if (first) {
4628                 err = ieee80211_register_hw(wl->hw);
4629                 if (err)
4630                         goto err_one_core_detach;
4631         }
4632
4633       out:
4634         return err;
4635
4636       err_one_core_detach:
4637         b43_one_core_detach(dev);
4638       err_wireless_exit:
4639         if (first)
4640                 b43_wireless_exit(dev, wl);
4641         return err;
4642 }
4643
4644 static void b43_remove(struct ssb_device *dev)
4645 {
4646         struct b43_wl *wl = ssb_get_devtypedata(dev);
4647         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4648
4649         /* We must cancel any work here before unregistering from ieee80211,
4650          * as the ieee80211 unreg will destroy the workqueue. */
4651         cancel_work_sync(&wldev->restart_work);
4652
4653         B43_WARN_ON(!wl);
4654         if (wl->current_dev == wldev)
4655                 ieee80211_unregister_hw(wl->hw);
4656
4657         b43_one_core_detach(dev);
4658
4659         if (list_empty(&wl->devlist)) {
4660                 /* Last core on the chip unregistered.
4661                  * We can destroy common struct b43_wl.
4662                  */
4663                 b43_wireless_exit(dev, wl);
4664         }
4665 }
4666
4667 /* Perform a hardware reset. This can be called from any context. */
4668 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
4669 {
4670         /* Must avoid requeueing, if we are in shutdown. */
4671         if (b43_status(dev) < B43_STAT_INITIALIZED)
4672                 return;
4673         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
4674         queue_work(dev->wl->hw->workqueue, &dev->restart_work);
4675 }
4676
4677 #ifdef CONFIG_PM
4678
4679 static int b43_suspend(struct ssb_device *dev, pm_message_t state)
4680 {
4681         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4682         struct b43_wl *wl = wldev->wl;
4683
4684         b43dbg(wl, "Suspending...\n");
4685
4686         mutex_lock(&wl->mutex);
4687         wldev->suspend_in_progress = true;
4688         wldev->suspend_init_status = b43_status(wldev);
4689         if (wldev->suspend_init_status >= B43_STAT_STARTED)
4690                 b43_wireless_core_stop(wldev);
4691         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
4692                 b43_wireless_core_exit(wldev);
4693         mutex_unlock(&wl->mutex);
4694
4695         b43dbg(wl, "Device suspended.\n");
4696
4697         return 0;
4698 }
4699
4700 static int b43_resume(struct ssb_device *dev)
4701 {
4702         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4703         struct b43_wl *wl = wldev->wl;
4704         int err = 0;
4705
4706         b43dbg(wl, "Resuming...\n");
4707
4708         mutex_lock(&wl->mutex);
4709         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
4710                 err = b43_wireless_core_init(wldev);
4711                 if (err) {
4712                         b43err(wl, "Resume failed at core init\n");
4713                         goto out;
4714                 }
4715         }
4716         if (wldev->suspend_init_status >= B43_STAT_STARTED) {
4717                 err = b43_wireless_core_start(wldev);
4718                 if (err) {
4719                         b43_leds_exit(wldev);
4720                         b43_rng_exit(wldev->wl);
4721                         b43_wireless_core_exit(wldev);
4722                         b43err(wl, "Resume failed at core start\n");
4723                         goto out;
4724                 }
4725         }
4726         b43dbg(wl, "Device resumed.\n");
4727  out:
4728         wldev->suspend_in_progress = false;
4729         mutex_unlock(&wl->mutex);
4730         return err;
4731 }
4732
4733 #else /* CONFIG_PM */
4734 # define b43_suspend    NULL
4735 # define b43_resume     NULL
4736 #endif /* CONFIG_PM */
4737
4738 static struct ssb_driver b43_ssb_driver = {
4739         .name           = KBUILD_MODNAME,
4740         .id_table       = b43_ssb_tbl,
4741         .probe          = b43_probe,
4742         .remove         = b43_remove,
4743         .suspend        = b43_suspend,
4744         .resume         = b43_resume,
4745 };
4746
4747 static void b43_print_driverinfo(void)
4748 {
4749         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
4750                    *feat_leds = "", *feat_rfkill = "";
4751
4752 #ifdef CONFIG_B43_PCI_AUTOSELECT
4753         feat_pci = "P";
4754 #endif
4755 #ifdef CONFIG_B43_PCMCIA
4756         feat_pcmcia = "M";
4757 #endif
4758 #ifdef CONFIG_B43_NPHY
4759         feat_nphy = "N";
4760 #endif
4761 #ifdef CONFIG_B43_LEDS
4762         feat_leds = "L";
4763 #endif
4764 #ifdef CONFIG_B43_RFKILL
4765         feat_rfkill = "R";
4766 #endif
4767         printk(KERN_INFO "Broadcom 43xx driver loaded "
4768                "[ Features: %s%s%s%s%s, Firmware-ID: "
4769                B43_SUPPORTED_FIRMWARE_ID " ]\n",
4770                feat_pci, feat_pcmcia, feat_nphy,
4771                feat_leds, feat_rfkill);
4772 }
4773
4774 static int __init b43_init(void)
4775 {
4776         int err;
4777
4778         b43_debugfs_init();
4779         err = b43_pcmcia_init();
4780         if (err)
4781                 goto err_dfs_exit;
4782         err = ssb_driver_register(&b43_ssb_driver);
4783         if (err)
4784                 goto err_pcmcia_exit;
4785         b43_print_driverinfo();
4786
4787         return err;
4788
4789 err_pcmcia_exit:
4790         b43_pcmcia_exit();
4791 err_dfs_exit:
4792         b43_debugfs_exit();
4793         return err;
4794 }
4795
4796 static void __exit b43_exit(void)
4797 {
4798         ssb_driver_unregister(&b43_ssb_driver);
4799         b43_pcmcia_exit();
4800         b43_debugfs_exit();
4801 }
4802
4803 module_init(b43_init)
4804 module_exit(b43_exit)