iwlwifi: remove 4965 from common uCode API structures
[safe/jmp/linux-2.6] / drivers / net / wireless / ath9k / rc.h
1 /*
2  * Copyright (c) 2004 Sam Leffler, Errno Consulting
3  * Copyright (c) 2004 Video54 Technologies, Inc.
4  * Copyright (c) 2008 Atheros Communications Inc.
5  *
6  * Permission to use, copy, modify, and/or distribute this software for any
7  * purpose with or without fee is hereby granted, provided that the above
8  * copyright notice and this permission notice appear in all copies.
9  *
10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17  */
18
19 #ifndef RC_H
20 #define RC_H
21
22 #include "ath9k.h"
23
24 struct ath_softc;
25
26 #define ATH_RATE_MAX     30
27 #define RATE_TABLE_SIZE  64
28 #define MAX_TX_RATE_PHY  48
29
30 /* VALID_ALL - valid for 20/40/Legacy,
31  * VALID - Legacy only,
32  * VALID_20 - HT 20 only,
33  * VALID_40 - HT 40 only */
34
35 #define INVALID    0x0
36 #define VALID      0x1
37 #define VALID_20   0x2
38 #define VALID_40   0x4
39 #define VALID_2040 (VALID_20|VALID_40)
40 #define VALID_ALL  (VALID_2040|VALID)
41
42 #define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)          \
43                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
44                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
45                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
46 #define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)          \
47                                 || (_phy == WLAN_RC_PHY_HT_40_DS)       \
48                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
49                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
50 #define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
51                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
52                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
53                                 || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
54
55 #define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
56
57 #define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ?       \
58                 (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID))
59
60 /* Return TRUE if flag supports HT20 && client supports HT20 or
61  * return TRUE if flag supports HT40 && client supports HT40.
62  * This is used becos some rates overlap between HT20/HT40.
63  */
64 #define WLAN_RC_PHY_HT_VALID(flag, capflag)                     \
65         (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \
66          ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG)))
67
68 #define WLAN_RC_DS_FLAG         (0x01)
69 #define WLAN_RC_40_FLAG         (0x02)
70 #define WLAN_RC_SGI_FLAG        (0x04)
71 #define WLAN_RC_HT_FLAG         (0x08)
72
73 /**
74  * struct ath_rate_table - Rate Control table
75  * @valid: valid for use in rate control
76  * @valid_single_stream: valid for use in rate control for
77  *      single stream operation
78  * @phy: CCK/OFDM
79  * @ratekbps: rate in Kbits per second
80  * @user_ratekbps: user rate in Kbits per second
81  * @ratecode: rate that goes into HW descriptors
82  * @short_preamble: Mask for enabling short preamble in ratecode for CCK
83  * @dot11rate: value that goes into supported
84  *      rates info element of MLME
85  * @ctrl_rate: Index of next lower basic rate, used for duration computation
86  * @max_4ms_framelen: maximum frame length(bytes) for tx duration
87  * @probe_interval: interval for rate control to probe for other rates
88  * @rssi_reduce_interval: interval for rate control to reduce rssi
89  * @initial_ratemax: initial ratemax value
90  */
91 struct ath_rate_table {
92         int rate_cnt;
93         u8 rateCodeToIndex[256];
94         struct {
95                 int valid;
96                 int valid_single_stream;
97                 u8 phy;
98                 u32 ratekbps;
99                 u32 user_ratekbps;
100                 u8 ratecode;
101                 u8 short_preamble;
102                 u8 dot11rate;
103                 u8 ctrl_rate;
104                 int8_t rssi_ack_validmin;
105                 int8_t rssi_ack_deltamin;
106                 u8 base_index;
107                 u8 cw40index;
108                 u8 sgi_index;
109                 u8 ht_index;
110                 u32 max_4ms_framelen;
111                 u16 lpAckDuration;
112                 u16 spAckDuration;
113         } info[RATE_TABLE_SIZE];
114         u32 probe_interval;
115         u32 rssi_reduce_interval;
116         u8 initial_ratemax;
117 };
118
119 struct ath_tx_ratectrl_state {
120         int8_t rssi_thres;      /* required rssi for this rate (dB) */
121         u8 per;                 /* recent estimate of packet error rate (%) */
122 };
123
124 struct ath_rateset {
125         u8 rs_nrates;
126         u8 rs_rates[ATH_RATE_MAX];
127 };
128
129 /**
130  * struct ath_rate_priv - Rate Control priv data
131  * @state: RC state
132  * @rssi_last: last ACK rssi
133  * @rssi_last_lookup: last ACK rssi used for lookup
134  * @rssi_last_prev: previous last ACK rssi
135  * @rssi_last_prev2: 2nd previous last ACK rssi
136  * @rssi_sum_cnt: count of rssi_sum for averaging
137  * @rssi_sum_rate: rate that we are averaging
138  * @rssi_sum: running sum of rssi for averaging
139  * @probe_rate: rate we are probing at
140  * @rssi_time: msec timestamp for last ack rssi
141  * @rssi_down_time: msec timestamp for last down step
142  * @probe_time: msec timestamp for last probe
143  * @hw_maxretry_pktcnt: num of packets since we got HW max retry error
144  * @max_valid_rate: maximum number of valid rate
145  * @per_down_time: msec timestamp for last PER down step
146  * @valid_phy_ratecnt: valid rate count
147  * @rate_max_phy: phy index for the max rate
148  * @probe_interval: interval for ratectrl to probe for other rates
149  * @prev_data_rix: rate idx of last data frame
150  * @ht_cap: HT capabilities
151  * @single_stream: When TRUE, only single TX stream possible
152  * @neg_rates: Negotatied rates
153  * @neg_ht_rates: Negotiated HT rates
154  */
155 struct ath_rate_priv {
156         int8_t rssi_last;
157         int8_t rssi_last_lookup;
158         int8_t rssi_last_prev;
159         int8_t rssi_last_prev2;
160         int32_t rssi_sum_cnt;
161         int32_t rssi_sum_rate;
162         int32_t rssi_sum;
163         u8 rate_table_size;
164         u8 probe_rate;
165         u8 hw_maxretry_pktcnt;
166         u8 max_valid_rate;
167         u8 valid_rate_index[RATE_TABLE_SIZE];
168         u8 ht_cap;
169         u8 single_stream;
170         u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
171         u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
172         u8 rc_phy_mode;
173         u8 rate_max_phy;
174         u32 rssi_time;
175         u32 rssi_down_time;
176         u32 probe_time;
177         u32 per_down_time;
178         u32 probe_interval;
179         u32 prev_data_rix;
180         u32 tx_triglevel_max;
181         struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
182         struct ath_rateset neg_rates;
183         struct ath_rateset neg_ht_rates;
184         struct ath_rate_softc *asc;
185 };
186
187 struct ath_tx_info_priv {
188         struct ath_tx_status tx;
189         int n_frames;
190         int n_bad_frames;
191         bool update_rc;
192 };
193
194 #define ATH_TX_INFO_PRIV(tx_info) \
195         ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
196
197 void ath_rate_attach(struct ath_softc *sc);
198 u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
199 int ath_rate_control_register(void);
200 void ath_rate_control_unregister(void);
201
202 #endif /* RC_H */