SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/tsi108_eth.c

   1 /*******************************************************************************
   2
   3   Copyright(c) 2006 Tundra Semiconductor Corporation.
   4
   5   This program is free software; you can redistribute it and/or modify it
   6   under the terms of the GNU General Public License as published by the Free
   7   Software Foundation; either version 2 of the License, or (at your option)
   8   any later version.
   9
  10   This program is distributed in the hope that it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc., 59
  17   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 *******************************************************************************/
  20
  21 /* This driver is based on the driver code originally developed
  22  * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by
  23  * scott.wood@timesys.com  * Copyright (C) 2003 TimeSys Corporation
  24  *
  25  * Currently changes from original version are:
  26  * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com)
  27  * - modifications to handle two ports independently and support for
  28  *   additional PHY devices (alexandre.bounine@tundra.com)
  29  * - Get hardware information from platform device. (tie-fei.zang@freescale.com)
  30  *
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/types.h>
  35 #include <linux/init.h>
  36 #include <linux/net.h>
  37 #include <linux/netdevice.h>
  38 #include <linux/etherdevice.h>
  39 #include <linux/skbuff.h>
  40 #include <linux/slab.h>
  41 #include <linux/spinlock.h>
  42 #include <linux/delay.h>
  43 #include <linux/crc32.h>
  44 #include <linux/mii.h>
  45 #include <linux/device.h>
  46 #include <linux/pci.h>
  47 #include <linux/rtnetlink.h>
  48 #include <linux/timer.h>
  49 #include <linux/platform_device.h>
  50 #include <linux/etherdevice.h>
  51
  52 #include <asm/system.h>
  53 #include <asm/io.h>
  54 #include <asm/tsi108.h>
  55
  56 #include "tsi108_eth.h"
  57
  58 #define MII_READ_DELAY 10000    /* max link wait time in msec */
  59
  60 #define TSI108_RXRING_LEN     256
  61
  62 /* NOTE: The driver currently does not support receiving packets
  63  * larger than the buffer size, so don't decrease this (unless you
  64  * want to add such support).
  65  */
  66 #define TSI108_RXBUF_SIZE     1536
  67
  68 #define TSI108_TXRING_LEN     256
  69
  70 #define TSI108_TX_INT_FREQ    64
  71
  72 /* Check the phy status every half a second. */
  73 #define CHECK_PHY_INTERVAL (HZ/2)
  74
  75 static int tsi108_init_one(struct platform_device *pdev);
  76 static int tsi108_ether_remove(struct platform_device *pdev);
  77
  78 struct tsi108_prv_data {
  79         void  __iomem *regs;    /* Base of normal regs */
  80         void  __iomem *phyregs; /* Base of register bank used for PHY access */
  81
  82         unsigned int phy;               /* Index of PHY for this interface */
  83         unsigned int irq_num;
  84         unsigned int id;
  85
  86         struct timer_list timer;/* Timer that triggers the check phy function */
  87         unsigned int rxtail;    /* Next entry in rxring to read */
  88         unsigned int rxhead;    /* Next entry in rxring to give a new buffer */
  89         unsigned int rxfree;    /* Number of free, allocated RX buffers */
  90
  91         unsigned int rxpending; /* Non-zero if there are still descriptors
  92                                  * to be processed from a previous descriptor
  93                                  * interrupt condition that has been cleared */
  94
  95         unsigned int txtail;    /* Next TX descriptor to check status on */
  96         unsigned int txhead;    /* Next TX descriptor to use */
  97
  98         /* Number of free TX descriptors.  This could be calculated from
  99          * rxhead and rxtail if one descriptor were left unused to disambiguate
 100          * full and empty conditions, but it's simpler to just keep track
 101          * explicitly. */
 102
 103         unsigned int txfree;
 104
 105         unsigned int phy_ok;            /* The PHY is currently powered on. */
 106
 107         /* PHY status (duplex is 1 for half, 2 for full,
 108          * so that the default 0 indicates that neither has
 109          * yet been configured). */
 110
 111         unsigned int link_up;
 112         unsigned int speed;
 113         unsigned int duplex;
 114
 115         tx_desc *txring;
 116         rx_desc *rxring;
 117         struct sk_buff *txskbs[TSI108_TXRING_LEN];
 118         struct sk_buff *rxskbs[TSI108_RXRING_LEN];
 119
 120         dma_addr_t txdma, rxdma;
 121
 122         /* txlock nests in misclock and phy_lock */
 123
 124         spinlock_t txlock, misclock;
 125
 126         /* stats is used to hold the upper bits of each hardware counter,
 127          * and tmpstats is used to hold the full values for returning
 128          * to the caller of get_stats().  They must be separate in case
 129          * an overflow interrupt occurs before the stats are consumed.
 130          */
 131
 132         struct net_device_stats stats;
 133         struct net_device_stats tmpstats;
 134
 135         /* These stats are kept separate in hardware, thus require individual
 136          * fields for handling carry.  They are combined in get_stats.
 137          */
 138
 139         unsigned long rx_fcs;   /* Add to rx_frame_errors */
 140         unsigned long rx_short_fcs;     /* Add to rx_frame_errors */
 141         unsigned long rx_long_fcs;      /* Add to rx_frame_errors */
 142         unsigned long rx_underruns;     /* Add to rx_length_errors */
 143         unsigned long rx_overruns;      /* Add to rx_length_errors */
 144
 145         unsigned long tx_coll_abort;    /* Add to tx_aborted_errors/collisions */
 146         unsigned long tx_pause_drop;    /* Add to tx_aborted_errors */
 147
 148         unsigned long mc_hash[16];
 149         u32 msg_enable;                 /* debug message level */
 150         struct mii_if_info mii_if;
 151         unsigned int init_media;
 152 };
 153
 154 /* Structure for a device driver */
 155
 156 static struct platform_driver tsi_eth_driver = {
 157         .probe = tsi108_init_one,
 158         .remove = tsi108_ether_remove,
 159         .driver = {
 160                 .name = "tsi-ethernet",
 161         },
 162 };
 163
 164 static void tsi108_timed_checker(unsigned long dev_ptr);
 165
 166 static void dump_eth_one(struct net_device *dev)
 167 {
 168         struct tsi108_prv_data *data = netdev_priv(dev);
 169
 170         printk("Dumping %s...\n", dev->name);
 171         printk("intstat %x intmask %x phy_ok %d"
 172                " link %d speed %d duplex %d\n",
 173                TSI_READ(TSI108_EC_INTSTAT),
 174                TSI_READ(TSI108_EC_INTMASK), data->phy_ok,
 175                data->link_up, data->speed, data->duplex);
 176
 177         printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n",
 178                data->txhead, data->txtail, data->txfree,
 179                TSI_READ(TSI108_EC_TXSTAT),
 180                TSI_READ(TSI108_EC_TXESTAT),
 181                TSI_READ(TSI108_EC_TXERR));
 182
 183         printk("RX: head %d, tail %d, free %d, stat %x,"
 184                " estat %x, err %x, pending %d\n\n",
 185                data->rxhead, data->rxtail, data->rxfree,
 186                TSI_READ(TSI108_EC_RXSTAT),
 187                TSI_READ(TSI108_EC_RXESTAT),
 188                TSI_READ(TSI108_EC_RXERR), data->rxpending);
 189 }
 190
 191 /* Synchronization is needed between the thread and up/down events.
 192  * Note that the PHY is accessed through the same registers for both
 193  * interfaces, so this can't be made interface-specific.
 194  */
 195
 196 static DEFINE_SPINLOCK(phy_lock);
 197
 198 static int tsi108_read_mii(struct tsi108_prv_data *data, int reg)
 199 {
 200         unsigned i;
 201
 202         TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
 203                                 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
 204                                 (reg << TSI108_MAC_MII_ADDR_REG));
 205         TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0);
 206         TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ);
 207         for (i = 0; i < 100; i++) {
 208                 if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
 209                       (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY)))
 210                         break;
 211                 udelay(10);
 212         }
 213
 214         if (i == 100)
 215                 return 0xffff;
 216         else
 217                 return (TSI_READ_PHY(TSI108_MAC_MII_DATAIN));
 218 }
 219
 220 static void tsi108_write_mii(struct tsi108_prv_data *data,
 221                                 int reg, u16 val)
 222 {
 223         unsigned i = 100;
 224         TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
 225                                 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
 226                                 (reg << TSI108_MAC_MII_ADDR_REG));
 227         TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val);
 228         while (i--) {
 229                 if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
 230                         TSI108_MAC_MII_IND_BUSY))
 231                         break;
 232                 udelay(10);
 233         }
 234 }
 235
 236 static int tsi108_mdio_read(struct net_device *dev, int addr, int reg)
 237 {
 238         struct tsi108_prv_data *data = netdev_priv(dev);
 239         return tsi108_read_mii(data, reg);
 240 }
 241
 242 static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val)
 243 {
 244         struct tsi108_prv_data *data = netdev_priv(dev);
 245         tsi108_write_mii(data, reg, val);
 246 }
 247
 248 static inline void tsi108_write_tbi(struct tsi108_prv_data *data,
 249                                         int reg, u16 val)
 250 {
 251         unsigned i = 1000;
 252         TSI_WRITE(TSI108_MAC_MII_ADDR,
 253                              (0x1e << TSI108_MAC_MII_ADDR_PHY)
 254                              | (reg << TSI108_MAC_MII_ADDR_REG));
 255         TSI_WRITE(TSI108_MAC_MII_DATAOUT, val);
 256         while(i--) {
 257                 if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY))
 258                         return;
 259                 udelay(10);
 260         }
 261         printk(KERN_ERR "%s function time out \n", __FUNCTION__);
 262 }
 263
 264 static int mii_speed(struct mii_if_info *mii)
 265 {
 266         int advert, lpa, val, media;
 267         int lpa2 = 0;
 268         int speed;
 269
 270         if (!mii_link_ok(mii))
 271                 return 0;
 272
 273         val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR);
 274         if ((val & BMSR_ANEGCOMPLETE) == 0)
 275                 return 0;
 276
 277         advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE);
 278         lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA);
 279         media = mii_nway_result(advert & lpa);
 280
 281         if (mii->supports_gmii)
 282                 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
 283
 284         speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
 285                         (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10);
 286         return speed;
 287 }
 288
 289 static void tsi108_check_phy(struct net_device *dev)
 290 {
 291         struct tsi108_prv_data *data = netdev_priv(dev);
 292         u32 mac_cfg2_reg, portctrl_reg;
 293         u32 duplex;
 294         u32 speed;
 295         unsigned long flags;
 296
 297         /* Do a dummy read, as for some reason the first read
 298          * after a link becomes up returns link down, even if
 299          * it's been a while since the link came up.
 300          */
 301
 302         spin_lock_irqsave(&phy_lock, flags);
 303
 304         if (!data->phy_ok)
 305                 goto out;
 306
 307         tsi108_read_mii(data, MII_BMSR);
 308
 309         duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
 310         data->init_media = 0;
 311
 312         if (netif_carrier_ok(dev)) {
 313
 314                 speed = mii_speed(&data->mii_if);
 315
 316                 if ((speed != data->speed) || duplex) {
 317
 318                         mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2);
 319                         portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL);
 320
 321                         mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK;
 322
 323                         if (speed == 1000) {
 324                                 mac_cfg2_reg |= TSI108_MAC_CFG2_GIG;
 325                                 portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG;
 326                         } else {
 327                                 mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG;
 328                                 portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG;
 329                         }
 330
 331                         data->speed = speed;
 332
 333                         if (data->mii_if.full_duplex) {
 334                                 mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX;
 335                                 portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX;
 336                                 data->duplex = 2;
 337                         } else {
 338                                 mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX;
 339                                 portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX;
 340                                 data->duplex = 1;
 341                         }
 342
 343                         TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
 344                         TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
 345
 346                         if (data->link_up == 0) {
 347                                 /* The manual says it can take 3-4 usecs for the speed change
 348                                  * to take effect.
 349                                  */
 350                                 udelay(5);
 351
 352                                 spin_lock(&data->txlock);
 353                                 if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
 354                                         netif_wake_queue(dev);
 355
 356                                 data->link_up = 1;
 357                                 spin_unlock(&data->txlock);
 358                         }
 359                 }
 360
 361         } else {
 362                 if (data->link_up == 1) {
 363                         netif_stop_queue(dev);
 364                         data->link_up = 0;
 365                         printk(KERN_NOTICE "%s : link is down\n", dev->name);
 366                 }
 367
 368                 goto out;
 369         }
 370
 371
 372 out:
 373         spin_unlock_irqrestore(&phy_lock, flags);
 374 }
 375
 376 static inline void
 377 tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift,
 378                       unsigned long *upper)
 379 {
 380         if (carry & carry_bit)
 381                 *upper += carry_shift;
 382 }
 383
 384 static void tsi108_stat_carry(struct net_device *dev)
 385 {
 386         struct tsi108_prv_data *data = netdev_priv(dev);
 387         u32 carry1, carry2;
 388
 389         spin_lock_irq(&data->misclock);
 390
 391         carry1 = TSI_READ(TSI108_STAT_CARRY1);
 392         carry2 = TSI_READ(TSI108_STAT_CARRY2);
 393
 394         TSI_WRITE(TSI108_STAT_CARRY1, carry1);
 395         TSI_WRITE(TSI108_STAT_CARRY2, carry2);
 396
 397         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES,
 398                               TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
 399
 400         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS,
 401                               TSI108_STAT_RXPKTS_CARRY,
 402                               &data->stats.rx_packets);
 403
 404         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS,
 405                               TSI108_STAT_RXFCS_CARRY, &data->rx_fcs);
 406
 407         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST,
 408                               TSI108_STAT_RXMCAST_CARRY,
 409                               &data->stats.multicast);
 410
 411         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN,
 412                               TSI108_STAT_RXALIGN_CARRY,
 413                               &data->stats.rx_frame_errors);
 414
 415         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH,
 416                               TSI108_STAT_RXLENGTH_CARRY,
 417                               &data->stats.rx_length_errors);
 418
 419         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT,
 420                               TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
 421
 422         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO,
 423                               TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
 424
 425         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG,
 426                               TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
 427
 428         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER,
 429                               TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs);
 430
 431         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP,
 432                               TSI108_STAT_RXDROP_CARRY,
 433                               &data->stats.rx_missed_errors);
 434
 435         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES,
 436                               TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
 437
 438         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS,
 439                               TSI108_STAT_TXPKTS_CARRY,
 440                               &data->stats.tx_packets);
 441
 442         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF,
 443                               TSI108_STAT_TXEXDEF_CARRY,
 444                               &data->stats.tx_aborted_errors);
 445
 446         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL,
 447                               TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort);
 448
 449         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL,
 450                               TSI108_STAT_TXTCOL_CARRY,
 451                               &data->stats.collisions);
 452
 453         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE,
 454                               TSI108_STAT_TXPAUSEDROP_CARRY,
 455                               &data->tx_pause_drop);
 456
 457         spin_unlock_irq(&data->misclock);
 458 }
 459
 460 /* Read a stat counter atomically with respect to carries.
 461  * data->misclock must be held.
 462  */
 463 static inline unsigned long
 464 tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit,
 465                  int carry_shift, unsigned long *upper)
 466 {
 467         int carryreg;
 468         unsigned long val;
 469
 470         if (reg < 0xb0)
 471                 carryreg = TSI108_STAT_CARRY1;
 472         else
 473                 carryreg = TSI108_STAT_CARRY2;
 474
 475       again:
 476         val = TSI_READ(reg) | *upper;
 477
 478         /* Check to see if it overflowed, but the interrupt hasn't
 479          * been serviced yet.  If so, handle the carry here, and
 480          * try again.
 481          */
 482
 483         if (unlikely(TSI_READ(carryreg) & carry_bit)) {
 484                 *upper += carry_shift;
 485                 TSI_WRITE(carryreg, carry_bit);
 486                 goto again;
 487         }
 488
 489         return val;
 490 }
 491
 492 static struct net_device_stats *tsi108_get_stats(struct net_device *dev)
 493 {
 494         unsigned long excol;
 495
 496         struct tsi108_prv_data *data = netdev_priv(dev);
 497         spin_lock_irq(&data->misclock);
 498
 499         data->tmpstats.rx_packets =
 500             tsi108_read_stat(data, TSI108_STAT_RXPKTS,
 501                              TSI108_STAT_CARRY1_RXPKTS,
 502                              TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets);
 503
 504         data->tmpstats.tx_packets =
 505             tsi108_read_stat(data, TSI108_STAT_TXPKTS,
 506                              TSI108_STAT_CARRY2_TXPKTS,
 507                              TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets);
 508
 509         data->tmpstats.rx_bytes =
 510             tsi108_read_stat(data, TSI108_STAT_RXBYTES,
 511                              TSI108_STAT_CARRY1_RXBYTES,
 512                              TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
 513
 514         data->tmpstats.tx_bytes =
 515             tsi108_read_stat(data, TSI108_STAT_TXBYTES,
 516                              TSI108_STAT_CARRY2_TXBYTES,
 517                              TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
 518
 519         data->tmpstats.multicast =
 520             tsi108_read_stat(data, TSI108_STAT_RXMCAST,
 521                              TSI108_STAT_CARRY1_RXMCAST,
 522                              TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast);
 523
 524         excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL,
 525                                  TSI108_STAT_CARRY2_TXEXCOL,
 526                                  TSI108_STAT_TXEXCOL_CARRY,
 527                                  &data->tx_coll_abort);
 528
 529         data->tmpstats.collisions =
 530             tsi108_read_stat(data, TSI108_STAT_TXTCOL,
 531                              TSI108_STAT_CARRY2_TXTCOL,
 532                              TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions);
 533
 534         data->tmpstats.collisions += excol;
 535
 536         data->tmpstats.rx_length_errors =
 537             tsi108_read_stat(data, TSI108_STAT_RXLENGTH,
 538                              TSI108_STAT_CARRY1_RXLENGTH,
 539                              TSI108_STAT_RXLENGTH_CARRY,
 540                              &data->stats.rx_length_errors);
 541
 542         data->tmpstats.rx_length_errors +=
 543             tsi108_read_stat(data, TSI108_STAT_RXRUNT,
 544                              TSI108_STAT_CARRY1_RXRUNT,
 545                              TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
 546
 547         data->tmpstats.rx_length_errors +=
 548             tsi108_read_stat(data, TSI108_STAT_RXJUMBO,
 549                              TSI108_STAT_CARRY1_RXJUMBO,
 550                              TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
 551
 552         data->tmpstats.rx_frame_errors =
 553             tsi108_read_stat(data, TSI108_STAT_RXALIGN,
 554                              TSI108_STAT_CARRY1_RXALIGN,
 555                              TSI108_STAT_RXALIGN_CARRY,
 556                              &data->stats.rx_frame_errors);
 557
 558         data->tmpstats.rx_frame_errors +=
 559             tsi108_read_stat(data, TSI108_STAT_RXFCS,
 560                              TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY,
 561                              &data->rx_fcs);
 562
 563         data->tmpstats.rx_frame_errors +=
 564             tsi108_read_stat(data, TSI108_STAT_RXFRAG,
 565                              TSI108_STAT_CARRY1_RXFRAG,
 566                              TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
 567
 568         data->tmpstats.rx_missed_errors =
 569             tsi108_read_stat(data, TSI108_STAT_RXDROP,
 570                              TSI108_STAT_CARRY1_RXDROP,
 571                              TSI108_STAT_RXDROP_CARRY,
 572                              &data->stats.rx_missed_errors);
 573
 574         /* These three are maintained by software. */
 575         data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors;
 576         data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors;
 577
 578         data->tmpstats.tx_aborted_errors =
 579             tsi108_read_stat(data, TSI108_STAT_TXEXDEF,
 580                              TSI108_STAT_CARRY2_TXEXDEF,
 581                              TSI108_STAT_TXEXDEF_CARRY,
 582                              &data->stats.tx_aborted_errors);
 583
 584         data->tmpstats.tx_aborted_errors +=
 585             tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP,
 586                              TSI108_STAT_CARRY2_TXPAUSE,
 587                              TSI108_STAT_TXPAUSEDROP_CARRY,
 588                              &data->tx_pause_drop);
 589
 590         data->tmpstats.tx_aborted_errors += excol;
 591
 592         data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors;
 593         data->tmpstats.rx_errors = data->tmpstats.rx_length_errors +
 594             data->tmpstats.rx_crc_errors +
 595             data->tmpstats.rx_frame_errors +
 596             data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors;
 597
 598         spin_unlock_irq(&data->misclock);
 599         return &data->tmpstats;
 600 }
 601
 602 static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev)
 603 {
 604         TSI_WRITE(TSI108_EC_RXQ_PTRHIGH,
 605                              TSI108_EC_RXQ_PTRHIGH_VALID);
 606
 607         TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO
 608                              | TSI108_EC_RXCTRL_QUEUE0);
 609 }
 610
 611 static void tsi108_restart_tx(struct tsi108_prv_data * data)
 612 {
 613         TSI_WRITE(TSI108_EC_TXQ_PTRHIGH,
 614                              TSI108_EC_TXQ_PTRHIGH_VALID);
 615
 616         TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT |
 617                              TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0);
 618 }
 619
 620 /* txlock must be held by caller, with IRQs disabled, and
 621  * with permission to re-enable them when the lock is dropped.
 622  */
 623 static void tsi108_complete_tx(struct net_device *dev)
 624 {
 625         struct tsi108_prv_data *data = netdev_priv(dev);
 626         int tx;
 627         struct sk_buff *skb;
 628         int release = 0;
 629
 630         while (!data->txfree || data->txhead != data->txtail) {
 631                 tx = data->txtail;
 632
 633                 if (data->txring[tx].misc & TSI108_TX_OWN)
 634                         break;
 635
 636                 skb = data->txskbs[tx];
 637
 638                 if (!(data->txring[tx].misc & TSI108_TX_OK))
 639                         printk("%s: bad tx packet, misc %x\n",
 640                                dev->name, data->txring[tx].misc);
 641
 642                 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
 643                 data->txfree++;
 644
 645                 if (data->txring[tx].misc & TSI108_TX_EOF) {
 646                         dev_kfree_skb_any(skb);
 647                         release++;
 648                 }
 649         }
 650
 651         if (release) {
 652                 if (is_valid_ether_addr(dev->dev_addr) && data->link_up)
 653                         netif_wake_queue(dev);
 654         }
 655 }
 656
 657 static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
 658 {
 659         struct tsi108_prv_data *data = netdev_priv(dev);
 660         int frags = skb_shinfo(skb)->nr_frags + 1;
 661         int i;
 662
 663         if (!data->phy_ok && net_ratelimit())
 664                 printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name);
 665
 666         if (!data->link_up) {
 667                 printk(KERN_ERR "%s: Transmit while link is down!\n",
 668                        dev->name);
 669                 netif_stop_queue(dev);
 670                 return NETDEV_TX_BUSY;
 671         }
 672
 673         if (data->txfree < MAX_SKB_FRAGS + 1) {
 674                 netif_stop_queue(dev);
 675
 676                 if (net_ratelimit())
 677                         printk(KERN_ERR "%s: Transmit with full tx ring!\n",
 678                                dev->name);
 679                 return NETDEV_TX_BUSY;
 680         }
 681
 682         if (data->txfree - frags < MAX_SKB_FRAGS + 1) {
 683                 netif_stop_queue(dev);
 684         }
 685
 686         spin_lock_irq(&data->txlock);
 687
 688         for (i = 0; i < frags; i++) {
 689                 int misc = 0;
 690                 int tx = data->txhead;
 691
 692                 /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with
 693                  * the interrupt bit.  TX descriptor-complete interrupts are
 694                  * enabled when the queue fills up, and masked when there is
 695                  * still free space.  This way, when saturating the outbound
 696                  * link, the tx interrupts are kept to a reasonable level.
 697                  * When the queue is not full, reclamation of skbs still occurs
 698                  * as new packets are transmitted, or on a queue-empty
 699                  * interrupt.
 700                  */
 701
 702                 if ((tx % TSI108_TX_INT_FREQ == 0) &&
 703                     ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ))
 704                         misc = TSI108_TX_INT;
 705
 706                 data->txskbs[tx] = skb;
 707
 708                 if (i == 0) {
 709                         data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
 710                                         skb->len - skb->data_len, DMA_TO_DEVICE);
 711                         data->txring[tx].len = skb->len - skb->data_len;
 712                         misc |= TSI108_TX_SOF;
 713                 } else {
 714                         skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
 715
 716                         data->txring[tx].buf0 =
 717                             dma_map_page(NULL, frag->page, frag->page_offset,
 718                                             frag->size, DMA_TO_DEVICE);
 719                         data->txring[tx].len = frag->size;
 720                 }
 721
 722                 if (i == frags - 1)
 723                         misc |= TSI108_TX_EOF;
 724
 725                 if (netif_msg_pktdata(data)) {
 726                         int i;
 727                         printk("%s: Tx Frame contents (%d)\n", dev->name,
 728                                skb->len);
 729                         for (i = 0; i < skb->len; i++)
 730                                 printk(" %2.2x", skb->data[i]);
 731                         printk(".\n");
 732                 }
 733                 data->txring[tx].misc = misc | TSI108_TX_OWN;
 734
 735                 data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN;
 736                 data->txfree--;
 737         }
 738
 739         tsi108_complete_tx(dev);
 740
 741         /* This must be done after the check for completed tx descriptors,
 742          * so that the tail pointer is correct.
 743          */
 744
 745         if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0))
 746                 tsi108_restart_tx(data);
 747
 748         spin_unlock_irq(&data->txlock);
 749         return NETDEV_TX_OK;
 750 }
 751
 752 static int tsi108_complete_rx(struct net_device *dev, int budget)
 753 {
 754         struct tsi108_prv_data *data = netdev_priv(dev);
 755         int done = 0;
 756
 757         while (data->rxfree && done != budget) {
 758                 int rx = data->rxtail;
 759                 struct sk_buff *skb;
 760
 761                 if (data->rxring[rx].misc & TSI108_RX_OWN)
 762                         break;
 763
 764                 skb = data->rxskbs[rx];
 765                 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
 766                 data->rxfree--;
 767                 done++;
 768
 769                 if (data->rxring[rx].misc & TSI108_RX_BAD) {
 770                         spin_lock_irq(&data->misclock);
 771
 772                         if (data->rxring[rx].misc & TSI108_RX_CRC)
 773                                 data->stats.rx_crc_errors++;
 774                         if (data->rxring[rx].misc & TSI108_RX_OVER)
 775                                 data->stats.rx_fifo_errors++;
 776
 777                         spin_unlock_irq(&data->misclock);
 778
 779                         dev_kfree_skb_any(skb);
 780                         continue;
 781                 }
 782                 if (netif_msg_pktdata(data)) {
 783                         int i;
 784                         printk("%s: Rx Frame contents (%d)\n",
 785                                dev->name, data->rxring[rx].len);
 786                         for (i = 0; i < data->rxring[rx].len; i++)
 787                                 printk(" %2.2x", skb->data[i]);
 788                         printk(".\n");
 789                 }
 790
 791                 skb->dev = dev;
 792                 skb_put(skb, data->rxring[rx].len);
 793                 skb->protocol = eth_type_trans(skb, dev);
 794                 netif_receive_skb(skb);
 795                 dev->last_rx = jiffies;
 796         }
 797
 798         return done;
 799 }
 800
 801 static int tsi108_refill_rx(struct net_device *dev, int budget)
 802 {
 803         struct tsi108_prv_data *data = netdev_priv(dev);
 804         int done = 0;
 805
 806         while (data->rxfree != TSI108_RXRING_LEN && done != budget) {
 807                 int rx = data->rxhead;
 808                 struct sk_buff *skb;
 809
 810                 data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2);
 811                 if (!skb)
 812                         break;
 813
 814                 skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */
 815
 816                 data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
 817                                                         TSI108_RX_SKB_SIZE,
 818                                                         DMA_FROM_DEVICE);
 819
 820                 /* Sometimes the hardware sets blen to zero after packet
 821                  * reception, even though the manual says that it's only ever
 822                  * modified by the driver.
 823                  */
 824
 825                 data->rxring[rx].blen = TSI108_RX_SKB_SIZE;
 826                 data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT;
 827
 828                 data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN;
 829                 data->rxfree++;
 830                 done++;
 831         }
 832
 833         if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) &
 834                            TSI108_EC_RXSTAT_QUEUE0))
 835                 tsi108_restart_rx(data, dev);
 836
 837         return done;
 838 }
 839
 840 static int tsi108_poll(struct net_device *dev, int *budget)
 841 {
 842         struct tsi108_prv_data *data = netdev_priv(dev);
 843         u32 estat = TSI_READ(TSI108_EC_RXESTAT);
 844         u32 intstat = TSI_READ(TSI108_EC_INTSTAT);
 845         int total_budget = min(*budget, dev->quota);
 846         int num_received = 0, num_filled = 0, budget_used;
 847
 848         intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
 849             TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT;
 850
 851         TSI_WRITE(TSI108_EC_RXESTAT, estat);
 852         TSI_WRITE(TSI108_EC_INTSTAT, intstat);
 853
 854         if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT))
 855                 num_received = tsi108_complete_rx(dev, total_budget);
 856
 857         /* This should normally fill no more slots than the number of
 858          * packets received in tsi108_complete_rx().  The exception
 859          * is when we previously ran out of memory for RX SKBs.  In that
 860          * case, it's helpful to obey the budget, not only so that the
 861          * CPU isn't hogged, but so that memory (which may still be low)
 862          * is not hogged by one device.
 863          *
 864          * A work unit is considered to be two SKBs to allow us to catch
 865          * up when the ring has shrunk due to out-of-memory but we're
 866          * still removing the full budget's worth of packets each time.
 867          */
 868
 869         if (data->rxfree < TSI108_RXRING_LEN)
 870                 num_filled = tsi108_refill_rx(dev, total_budget * 2);
 871
 872         if (intstat & TSI108_INT_RXERROR) {
 873                 u32 err = TSI_READ(TSI108_EC_RXERR);
 874                 TSI_WRITE(TSI108_EC_RXERR, err);
 875
 876                 if (err) {
 877                         if (net_ratelimit())
 878                                 printk(KERN_DEBUG "%s: RX error %x\n",
 879                                        dev->name, err);
 880
 881                         if (!(TSI_READ(TSI108_EC_RXSTAT) &
 882                               TSI108_EC_RXSTAT_QUEUE0))
 883                                 tsi108_restart_rx(data, dev);
 884                 }
 885         }
 886
 887         if (intstat & TSI108_INT_RXOVERRUN) {
 888                 spin_lock_irq(&data->misclock);
 889                 data->stats.rx_fifo_errors++;
 890                 spin_unlock_irq(&data->misclock);
 891         }
 892
 893         budget_used = max(num_received, num_filled / 2);
 894
 895         *budget -= budget_used;
 896         dev->quota -= budget_used;
 897
 898         if (budget_used != total_budget) {
 899                 data->rxpending = 0;
 900                 netif_rx_complete(dev);
 901
 902                 TSI_WRITE(TSI108_EC_INTMASK,
 903                                      TSI_READ(TSI108_EC_INTMASK)
 904                                      & ~(TSI108_INT_RXQUEUE0
 905                                          | TSI108_INT_RXTHRESH |
 906                                          TSI108_INT_RXOVERRUN |
 907                                          TSI108_INT_RXERROR |
 908                                          TSI108_INT_RXWAIT));
 909
 910                 /* IRQs are level-triggered, so no need to re-check */
 911                 return 0;
 912         } else {
 913                 data->rxpending = 1;
 914         }
 915
 916         return 1;
 917 }
 918
 919 static void tsi108_rx_int(struct net_device *dev)
 920 {
 921         struct tsi108_prv_data *data = netdev_priv(dev);
 922
 923         /* A race could cause dev to already be scheduled, so it's not an
 924          * error if that happens (and interrupts shouldn't be re-masked,
 925          * because that can cause harmful races, if poll has already
 926          * unmasked them but not cleared LINK_STATE_SCHED).
 927          *
 928          * This can happen if this code races with tsi108_poll(), which masks
 929          * the interrupts after tsi108_irq_one() read the mask, but before
 930          * netif_rx_schedule is called.  It could also happen due to calls
 931          * from tsi108_check_rxring().
 932          */
 933
 934         if (netif_rx_schedule_prep(dev)) {
 935                 /* Mask, rather than ack, the receive interrupts.  The ack
 936                  * will happen in tsi108_poll().
 937                  */
 938
 939                 TSI_WRITE(TSI108_EC_INTMASK,
 940                                      TSI_READ(TSI108_EC_INTMASK) |
 941                                      TSI108_INT_RXQUEUE0
 942                                      | TSI108_INT_RXTHRESH |
 943                                      TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR |
 944                                      TSI108_INT_RXWAIT);
 945                 __netif_rx_schedule(dev);
 946         } else {
 947                 if (!netif_running(dev)) {
 948                         /* This can happen if an interrupt occurs while the
 949                          * interface is being brought down, as the START
 950                          * bit is cleared before the stop function is called.
 951                          *
 952                          * In this case, the interrupts must be masked, or
 953                          * they will continue indefinitely.
 954                          *
 955                          * There's a race here if the interface is brought down
 956                          * and then up in rapid succession, as the device could
 957                          * be made running after the above check and before
 958                          * the masking below.  This will only happen if the IRQ
 959                          * thread has a lower priority than the task brining
 960                          * up the interface.  Fixing this race would likely
 961                          * require changes in generic code.
 962                          */
 963
 964                         TSI_WRITE(TSI108_EC_INTMASK,
 965                                              TSI_READ
 966                                              (TSI108_EC_INTMASK) |
 967                                              TSI108_INT_RXQUEUE0 |
 968                                              TSI108_INT_RXTHRESH |
 969                                              TSI108_INT_RXOVERRUN |
 970                                              TSI108_INT_RXERROR |
 971                                              TSI108_INT_RXWAIT);
 972                 }
 973         }
 974 }
 975
 976 /* If the RX ring has run out of memory, try periodically
 977  * to allocate some more, as otherwise poll would never
 978  * get called (apart from the initial end-of-queue condition).
 979  *
 980  * This is called once per second (by default) from the thread.
 981  */
 982
 983 static void tsi108_check_rxring(struct net_device *dev)
 984 {
 985         struct tsi108_prv_data *data = netdev_priv(dev);
 986
 987         /* A poll is scheduled, as opposed to caling tsi108_refill_rx
 988          * directly, so as to keep the receive path single-threaded
 989          * (and thus not needing a lock).
 990          */
 991
 992         if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4)
 993                 tsi108_rx_int(dev);
 994 }
 995
 996 static void tsi108_tx_int(struct net_device *dev)
 997 {
 998         struct tsi108_prv_data *data = netdev_priv(dev);
 999         u32 estat = TSI_READ(TSI108_EC_TXESTAT);
1000
1001         TSI_WRITE(TSI108_EC_TXESTAT, estat);
1002         TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 |
1003                              TSI108_INT_TXIDLE | TSI108_INT_TXERROR);
1004         if (estat & TSI108_EC_TXESTAT_Q0_ERR) {
1005                 u32 err = TSI_READ(TSI108_EC_TXERR);
1006                 TSI_WRITE(TSI108_EC_TXERR, err);
1007
1008                 if (err && net_ratelimit())
1009                         printk(KERN_ERR "%s: TX error %x\n", dev->name, err);
1010         }
1011
1012         if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) {
1013                 spin_lock(&data->txlock);
1014                 tsi108_complete_tx(dev);
1015                 spin_unlock(&data->txlock);
1016         }
1017 }
1018
1019
1020 static irqreturn_t tsi108_irq(int irq, void *dev_id)
1021 {
1022         struct net_device *dev = dev_id;
1023         struct tsi108_prv_data *data = netdev_priv(dev);
1024         u32 stat = TSI_READ(TSI108_EC_INTSTAT);
1025
1026         if (!(stat & TSI108_INT_ANY))
1027                 return IRQ_NONE;        /* Not our interrupt */
1028
1029         stat &= ~TSI_READ(TSI108_EC_INTMASK);
1030
1031         if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE |
1032                     TSI108_INT_TXERROR))
1033                 tsi108_tx_int(dev);
1034         if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
1035                     TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN |
1036                     TSI108_INT_RXERROR))
1037                 tsi108_rx_int(dev);
1038
1039         if (stat & TSI108_INT_SFN) {
1040                 if (net_ratelimit())
1041                         printk(KERN_DEBUG "%s: SFN error\n", dev->name);
1042                 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN);
1043         }
1044
1045         if (stat & TSI108_INT_STATCARRY) {
1046                 tsi108_stat_carry(dev);
1047                 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY);
1048         }
1049
1050         return IRQ_HANDLED;
1051 }
1052
1053 static void tsi108_stop_ethernet(struct net_device *dev)
1054 {
1055         struct tsi108_prv_data *data = netdev_priv(dev);
1056         int i = 1000;
1057         /* Disable all TX and RX queues ... */
1058         TSI_WRITE(TSI108_EC_TXCTRL, 0);
1059         TSI_WRITE(TSI108_EC_RXCTRL, 0);
1060
1061         /* ...and wait for them to become idle */
1062         while(i--) {
1063                 if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE))
1064                         break;
1065                 udelay(10);
1066         }
1067         i = 1000;
1068         while(i--){
1069                 if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE))
1070                         return;
1071                 udelay(10);
1072         }
1073         printk(KERN_ERR "%s function time out \n", __FUNCTION__);
1074 }
1075
1076 static void tsi108_reset_ether(struct tsi108_prv_data * data)
1077 {
1078         TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST);
1079         udelay(100);
1080         TSI_WRITE(TSI108_MAC_CFG1, 0);
1081
1082         TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST);
1083         udelay(100);
1084         TSI_WRITE(TSI108_EC_PORTCTRL,
1085                              TSI_READ(TSI108_EC_PORTCTRL) &
1086                              ~TSI108_EC_PORTCTRL_STATRST);
1087
1088         TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST);
1089         udelay(100);
1090         TSI_WRITE(TSI108_EC_TXCFG,
1091                              TSI_READ(TSI108_EC_TXCFG) &
1092                              ~TSI108_EC_TXCFG_RST);
1093
1094         TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST);
1095         udelay(100);
1096         TSI_WRITE(TSI108_EC_RXCFG,
1097                              TSI_READ(TSI108_EC_RXCFG) &
1098                              ~TSI108_EC_RXCFG_RST);
1099
1100         TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1101                              TSI_READ(TSI108_MAC_MII_MGMT_CFG) |
1102                              TSI108_MAC_MII_MGMT_RST);
1103         udelay(100);
1104         TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1105                              (TSI_READ(TSI108_MAC_MII_MGMT_CFG) &
1106                              ~(TSI108_MAC_MII_MGMT_RST |
1107                                TSI108_MAC_MII_MGMT_CLK)) | 0x07);
1108 }
1109
1110 static int tsi108_get_mac(struct net_device *dev)
1111 {
1112         struct tsi108_prv_data *data = netdev_priv(dev);
1113         u32 word1 = TSI_READ(TSI108_MAC_ADDR1);
1114         u32 word2 = TSI_READ(TSI108_MAC_ADDR2);
1115
1116         /* Note that the octets are reversed from what the manual says,
1117          * producing an even weirder ordering...
1118          */
1119         if (word2 == 0 && word1 == 0) {
1120                 dev->dev_addr[0] = 0x00;
1121                 dev->dev_addr[1] = 0x06;
1122                 dev->dev_addr[2] = 0xd2;
1123                 dev->dev_addr[3] = 0x00;
1124                 dev->dev_addr[4] = 0x00;
1125                 if (0x8 == data->phy)
1126                         dev->dev_addr[5] = 0x01;
1127                 else
1128                         dev->dev_addr[5] = 0x02;
1129
1130                 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1131
1132                 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1133                     (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1134
1135                 TSI_WRITE(TSI108_MAC_ADDR1, word1);
1136                 TSI_WRITE(TSI108_MAC_ADDR2, word2);
1137         } else {
1138                 dev->dev_addr[0] = (word2 >> 16) & 0xff;
1139                 dev->dev_addr[1] = (word2 >> 24) & 0xff;
1140                 dev->dev_addr[2] = (word1 >> 0) & 0xff;
1141                 dev->dev_addr[3] = (word1 >> 8) & 0xff;
1142                 dev->dev_addr[4] = (word1 >> 16) & 0xff;
1143                 dev->dev_addr[5] = (word1 >> 24) & 0xff;
1144         }
1145
1146         if (!is_valid_ether_addr(dev->dev_addr)) {
1147                 printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
1148                 return -EINVAL;
1149         }
1150
1151         return 0;
1152 }
1153
1154 static int tsi108_set_mac(struct net_device *dev, void *addr)
1155 {
1156         struct tsi108_prv_data *data = netdev_priv(dev);
1157         u32 word1, word2;
1158         int i;
1159
1160         if (!is_valid_ether_addr(addr))
1161                 return -EINVAL;
1162
1163         for (i = 0; i < 6; i++)
1164                 /* +2 is for the offset of the HW addr type */
1165                 dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
1166
1167         word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1168
1169         word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1170             (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1171
1172         spin_lock_irq(&data->misclock);
1173         TSI_WRITE(TSI108_MAC_ADDR1, word1);
1174         TSI_WRITE(TSI108_MAC_ADDR2, word2);
1175         spin_lock(&data->txlock);
1176
1177         if (data->txfree && data->link_up)
1178                 netif_wake_queue(dev);
1179
1180         spin_unlock(&data->txlock);
1181         spin_unlock_irq(&data->misclock);
1182         return 0;
1183 }
1184
1185 /* Protected by dev->xmit_lock. */
1186 static void tsi108_set_rx_mode(struct net_device *dev)
1187 {
1188         struct tsi108_prv_data *data = netdev_priv(dev);
1189         u32 rxcfg = TSI_READ(TSI108_EC_RXCFG);
1190
1191         if (dev->flags & IFF_PROMISC) {
1192                 rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH);
1193                 rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE;
1194                 goto out;
1195         }
1196
1197         rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE);
1198
1199         if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
1200                 int i;
1201                 struct dev_mc_list *mc = dev->mc_list;
1202                 rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH;
1203
1204                 memset(data->mc_hash, 0, sizeof(data->mc_hash));
1205
1206                 while (mc) {
1207                         u32 hash, crc;
1208
1209                         if (mc->dmi_addrlen == 6) {
1210                                 crc = ether_crc(6, mc->dmi_addr);
1211                                 hash = crc >> 23;
1212
1213                                 __set_bit(hash, &data->mc_hash[0]);
1214                         } else {
1215                                 printk(KERN_ERR
1216                                        "%s: got multicast address of length %d "
1217                                        "instead of 6.\n", dev->name,
1218                                        mc->dmi_addrlen);
1219                         }
1220
1221                         mc = mc->next;
1222                 }
1223
1224                 TSI_WRITE(TSI108_EC_HASHADDR,
1225                                      TSI108_EC_HASHADDR_AUTOINC |
1226                                      TSI108_EC_HASHADDR_MCAST);
1227
1228                 for (i = 0; i < 16; i++) {
1229                         /* The manual says that the hardware may drop
1230                          * back-to-back writes to the data register.
1231                          */
1232                         udelay(1);
1233                         TSI_WRITE(TSI108_EC_HASHDATA,
1234                                              data->mc_hash[i]);
1235                 }
1236         }
1237
1238       out:
1239         TSI_WRITE(TSI108_EC_RXCFG, rxcfg);
1240 }
1241
1242 static void tsi108_init_phy(struct net_device *dev)
1243 {
1244         struct tsi108_prv_data *data = netdev_priv(dev);
1245         u32 i = 0;
1246         u16 phyval = 0;
1247         unsigned long flags;
1248
1249         spin_lock_irqsave(&phy_lock, flags);
1250
1251         tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
1252         while (i--){
1253                 if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
1254                         break;
1255                 udelay(10);
1256         }
1257         if (i == 0)
1258                 printk(KERN_ERR "%s function time out \n", __FUNCTION__);
1259
1260 #if (TSI108_PHY_TYPE == PHY_BCM54XX)    /* Broadcom BCM54xx PHY */
1261         tsi108_write_mii(data, 0x09, 0x0300);
1262         tsi108_write_mii(data, 0x10, 0x1020);
1263         tsi108_write_mii(data, 0x1c, 0x8c00);
1264 #endif
1265
1266         tsi108_write_mii(data,
1267                          MII_BMCR,
1268                          BMCR_ANENABLE | BMCR_ANRESTART);
1269         while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART)
1270                 cpu_relax();
1271
1272         /* Set G/MII mode and receive clock select in TBI control #2.  The
1273          * second port won't work if this isn't done, even though we don't
1274          * use TBI mode.
1275          */
1276
1277         tsi108_write_tbi(data, 0x11, 0x30);
1278
1279         /* FIXME: It seems to take more than 2 back-to-back reads to the
1280          * PHY_STAT register before the link up status bit is set.
1281          */
1282
1283         data->link_up = 1;
1284
1285         while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
1286                  BMSR_LSTATUS)) {
1287                 if (i++ > (MII_READ_DELAY / 10)) {
1288                         data->link_up = 0;
1289                         break;
1290                 }
1291                 spin_unlock_irqrestore(&phy_lock, flags);
1292                 msleep(10);
1293                 spin_lock_irqsave(&phy_lock, flags);
1294         }
1295
1296         printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
1297         data->phy_ok = 1;
1298         data->init_media = 1;
1299         spin_unlock_irqrestore(&phy_lock, flags);
1300 }
1301
1302 static void tsi108_kill_phy(struct net_device *dev)
1303 {
1304         struct tsi108_prv_data *data = netdev_priv(dev);
1305         unsigned long flags;
1306
1307         spin_lock_irqsave(&phy_lock, flags);
1308         tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN);
1309         data->phy_ok = 0;
1310         spin_unlock_irqrestore(&phy_lock, flags);
1311 }
1312
1313 static int tsi108_open(struct net_device *dev)
1314 {
1315         int i;
1316         struct tsi108_prv_data *data = netdev_priv(dev);
1317         unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc);
1318         unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc);
1319
1320         i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev);
1321         if (i != 0) {
1322                 printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n",
1323                        data->id, data->irq_num);
1324                 return i;
1325         } else {
1326                 dev->irq = data->irq_num;
1327                 printk(KERN_NOTICE
1328                        "tsi108_open : Port %d Assigned IRQ %d to %s\n",
1329                        data->id, dev->irq, dev->name);
1330         }
1331
1332         data->rxring = dma_alloc_coherent(NULL, rxring_size,
1333                         &data->rxdma, GFP_KERNEL);
1334
1335         if (!data->rxring) {
1336                 printk(KERN_DEBUG
1337                        "TSI108_ETH: failed to allocate memory for rxring!\n");
1338                 return -ENOMEM;
1339         } else {
1340                 memset(data->rxring, 0, rxring_size);
1341         }
1342
1343         data->txring = dma_alloc_coherent(NULL, txring_size,
1344                         &data->txdma, GFP_KERNEL);
1345
1346         if (!data->txring) {
1347                 printk(KERN_DEBUG
1348                        "TSI108_ETH: failed to allocate memory for txring!\n");
1349                 pci_free_consistent(0, rxring_size, data->rxring, data->rxdma);
1350                 return -ENOMEM;
1351         } else {
1352                 memset(data->txring, 0, txring_size);
1353         }
1354
1355         for (i = 0; i < TSI108_RXRING_LEN; i++) {
1356                 data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc);
1357                 data->rxring[i].blen = TSI108_RXBUF_SIZE;
1358                 data->rxring[i].vlan = 0;
1359         }
1360
1361         data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma;
1362
1363         data->rxtail = 0;
1364         data->rxhead = 0;
1365
1366         for (i = 0; i < TSI108_RXRING_LEN; i++) {
1367                 struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN);
1368
1369                 if (!skb) {
1370                         /* Bah.  No memory for now, but maybe we'll get
1371                          * some more later.
1372                          * For now, we'll live with the smaller ring.
1373                          */
1374                         printk(KERN_WARNING
1375                                "%s: Could only allocate %d receive skb(s).\n",
1376                                dev->name, i);
1377                         data->rxhead = i;
1378                         break;
1379                 }
1380
1381                 data->rxskbs[i] = skb;
1382                 /* Align the payload on a 4-byte boundary */
1383                 skb_reserve(skb, 2);
1384                 data->rxskbs[i] = skb;
1385                 data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data);
1386                 data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT;
1387         }
1388
1389         data->rxfree = i;
1390         TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma);
1391
1392         for (i = 0; i < TSI108_TXRING_LEN; i++) {
1393                 data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc);
1394                 data->txring[i].misc = 0;
1395         }
1396
1397         data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma;
1398         data->txtail = 0;
1399         data->txhead = 0;
1400         data->txfree = TSI108_TXRING_LEN;
1401         TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma);
1402         tsi108_init_phy(dev);
1403
1404         setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev);
1405         mod_timer(&data->timer, jiffies + 1);
1406
1407         tsi108_restart_rx(data, dev);
1408
1409         TSI_WRITE(TSI108_EC_INTSTAT, ~0);
1410
1411         TSI_WRITE(TSI108_EC_INTMASK,
1412                              ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR |
1413                                TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 |
1414                                TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT |
1415                                TSI108_INT_SFN | TSI108_INT_STATCARRY));
1416
1417         TSI_WRITE(TSI108_MAC_CFG1,
1418                              TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN);
1419         netif_start_queue(dev);
1420         return 0;
1421 }
1422
1423 static int tsi108_close(struct net_device *dev)
1424 {
1425         struct tsi108_prv_data *data = netdev_priv(dev);
1426
1427         netif_stop_queue(dev);
1428
1429         del_timer_sync(&data->timer);
1430
1431         tsi108_stop_ethernet(dev);
1432         tsi108_kill_phy(dev);
1433         TSI_WRITE(TSI108_EC_INTMASK, ~0);
1434         TSI_WRITE(TSI108_MAC_CFG1, 0);
1435
1436         /* Check for any pending TX packets, and drop them. */
1437
1438         while (!data->txfree || data->txhead != data->txtail) {
1439                 int tx = data->txtail;
1440                 struct sk_buff *skb;
1441                 skb = data->txskbs[tx];
1442                 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
1443                 data->txfree++;
1444                 dev_kfree_skb(skb);
1445         }
1446
1447         synchronize_irq(data->irq_num);
1448         free_irq(data->irq_num, dev);
1449
1450         /* Discard the RX ring. */
1451
1452         while (data->rxfree) {
1453                 int rx = data->rxtail;
1454                 struct sk_buff *skb;
1455
1456                 skb = data->rxskbs[rx];
1457                 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
1458                 data->rxfree--;
1459                 dev_kfree_skb(skb);
1460         }
1461
1462         dma_free_coherent(0,
1463                             TSI108_RXRING_LEN * sizeof(rx_desc),
1464                             data->rxring, data->rxdma);
1465         dma_free_coherent(0,
1466                             TSI108_TXRING_LEN * sizeof(tx_desc),
1467                             data->txring, data->txdma);
1468
1469         return 0;
1470 }
1471
1472 static void tsi108_init_mac(struct net_device *dev)
1473 {
1474         struct tsi108_prv_data *data = netdev_priv(dev);
1475
1476         TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE |
1477                              TSI108_MAC_CFG2_PADCRC);
1478
1479         TSI_WRITE(TSI108_EC_TXTHRESH,
1480                              (192 << TSI108_EC_TXTHRESH_STARTFILL) |
1481                              (192 << TSI108_EC_TXTHRESH_STOPFILL));
1482
1483         TSI_WRITE(TSI108_STAT_CARRYMASK1,
1484                              ~(TSI108_STAT_CARRY1_RXBYTES |
1485                                TSI108_STAT_CARRY1_RXPKTS |
1486                                TSI108_STAT_CARRY1_RXFCS |
1487                                TSI108_STAT_CARRY1_RXMCAST |
1488                                TSI108_STAT_CARRY1_RXALIGN |
1489                                TSI108_STAT_CARRY1_RXLENGTH |
1490                                TSI108_STAT_CARRY1_RXRUNT |
1491                                TSI108_STAT_CARRY1_RXJUMBO |
1492                                TSI108_STAT_CARRY1_RXFRAG |
1493                                TSI108_STAT_CARRY1_RXJABBER |
1494                                TSI108_STAT_CARRY1_RXDROP));
1495
1496         TSI_WRITE(TSI108_STAT_CARRYMASK2,
1497                              ~(TSI108_STAT_CARRY2_TXBYTES |
1498                                TSI108_STAT_CARRY2_TXPKTS |
1499                                TSI108_STAT_CARRY2_TXEXDEF |
1500                                TSI108_STAT_CARRY2_TXEXCOL |
1501                                TSI108_STAT_CARRY2_TXTCOL |
1502                                TSI108_STAT_CARRY2_TXPAUSE));
1503
1504         TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN);
1505         TSI_WRITE(TSI108_MAC_CFG1, 0);
1506
1507         TSI_WRITE(TSI108_EC_RXCFG,
1508                              TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE);
1509
1510         TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT |
1511                              TSI108_EC_TXQ_CFG_EOQ_OWN_INT |
1512                              TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1513                                                 TSI108_EC_TXQ_CFG_SFNPORT));
1514
1515         TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT |
1516                              TSI108_EC_RXQ_CFG_EOQ_OWN_INT |
1517                              TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1518                                                 TSI108_EC_RXQ_CFG_SFNPORT));
1519
1520         TSI_WRITE(TSI108_EC_TXQ_BUFCFG,
1521                              TSI108_EC_TXQ_BUFCFG_BURST256 |
1522                              TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1523                                                 TSI108_EC_TXQ_BUFCFG_SFNPORT));
1524
1525         TSI_WRITE(TSI108_EC_RXQ_BUFCFG,
1526                              TSI108_EC_RXQ_BUFCFG_BURST256 |
1527                              TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1528                                                 TSI108_EC_RXQ_BUFCFG_SFNPORT));
1529
1530         TSI_WRITE(TSI108_EC_INTMASK, ~0);
1531 }
1532
1533 static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1534 {
1535         struct tsi108_prv_data *data = netdev_priv(dev);
1536         return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
1537 }
1538
1539 static int
1540 tsi108_init_one(struct platform_device *pdev)
1541 {
1542         struct net_device *dev = NULL;
1543         struct tsi108_prv_data *data = NULL;
1544         hw_info *einfo;
1545         int err = 0;
1546
1547         einfo = pdev->dev.platform_data;
1548
1549         if (NULL == einfo) {
1550                 printk(KERN_ERR "tsi-eth %d: Missing additional data!\n",
1551                        pdev->id);
1552                 return -ENODEV;
1553         }
1554
1555         /* Create an ethernet device instance */
1556
1557         dev = alloc_etherdev(sizeof(struct tsi108_prv_data));
1558         if (!dev) {
1559                 printk("tsi108_eth: Could not allocate a device structure\n");
1560                 return -ENOMEM;
1561         }
1562
1563         printk("tsi108_eth%d: probe...\n", pdev->id);
1564         data = netdev_priv(dev);
1565
1566         pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
1567                         pdev->id, einfo->regs, einfo->phyregs,
1568                         einfo->phy, einfo->irq_num);
1569
1570         data->regs = ioremap(einfo->regs, 0x400);
1571         if (NULL == data->regs) {
1572                 err = -ENOMEM;
1573                 goto regs_fail;
1574         }
1575
1576         data->phyregs = ioremap(einfo->phyregs, 0x400);
1577         if (NULL == data->phyregs) {
1578                 err = -ENOMEM;
1579                 goto regs_fail;
1580         }
1581 /* MII setup */
1582         data->mii_if.dev = dev;
1583         data->mii_if.mdio_read = tsi108_mdio_read;
1584         data->mii_if.mdio_write = tsi108_mdio_write;
1585         data->mii_if.phy_id = einfo->phy;
1586         data->mii_if.phy_id_mask = 0x1f;
1587         data->mii_if.reg_num_mask = 0x1f;
1588         data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
1589
1590         data->phy = einfo->phy;
1591         data->irq_num = einfo->irq_num;
1592         data->id = pdev->id;
1593         dev->open = tsi108_open;
1594         dev->stop = tsi108_close;
1595         dev->hard_start_xmit = tsi108_send_packet;
1596         dev->set_mac_address = tsi108_set_mac;
1597         dev->set_multicast_list = tsi108_set_rx_mode;
1598         dev->get_stats = tsi108_get_stats;
1599         dev->poll = tsi108_poll;
1600         dev->do_ioctl = tsi108_do_ioctl;
1601         dev->weight = 64;  /* 64 is more suitable for GigE interface - klai */
1602
1603         /* Apparently, the Linux networking code won't use scatter-gather
1604          * if the hardware doesn't do checksums.  However, it's faster
1605          * to checksum in place and use SG, as (among other reasons)
1606          * the cache won't be dirtied (which then has to be flushed
1607          * before DMA).  The checksumming is done by the driver (via
1608          * a new function skb_csum_dev() in net/core/skbuff.c).
1609          */
1610
1611         dev->features = NETIF_F_HIGHDMA;
1612         SET_MODULE_OWNER(dev);
1613
1614         spin_lock_init(&data->txlock);
1615         spin_lock_init(&data->misclock);
1616
1617         tsi108_reset_ether(data);
1618         tsi108_kill_phy(dev);
1619
1620         if ((err = tsi108_get_mac(dev)) != 0) {
1621                 printk(KERN_ERR "%s: Invalid MAC address.  Please correct.\n",
1622                        dev->name);
1623                 goto register_fail;
1624         }
1625
1626         tsi108_init_mac(dev);
1627         err = register_netdev(dev);
1628         if (err) {
1629                 printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
1630                                 dev->name);
1631                 goto register_fail;
1632         }
1633
1634         printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: "
1635                "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
1636                dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
1637                dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
1638 #ifdef DEBUG
1639         data->msg_enable = DEBUG;
1640         dump_eth_one(dev);
1641 #endif
1642
1643         return 0;
1644
1645 register_fail:
1646         iounmap(data->regs);
1647         iounmap(data->phyregs);
1648
1649 regs_fail:
1650         free_netdev(dev);
1651         return err;
1652 }
1653
1654 /* There's no way to either get interrupts from the PHY when
1655  * something changes, or to have the Tsi108 automatically communicate
1656  * with the PHY to reconfigure itself.
1657  *
1658  * Thus, we have to do it using a timer.
1659  */
1660
1661 static void tsi108_timed_checker(unsigned long dev_ptr)
1662 {
1663         struct net_device *dev = (struct net_device *)dev_ptr;
1664         struct tsi108_prv_data *data = netdev_priv(dev);
1665
1666         tsi108_check_phy(dev);
1667         tsi108_check_rxring(dev);
1668         mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL);
1669 }
1670
1671 static int tsi108_ether_init(void)
1672 {
1673         int ret;
1674         ret = platform_driver_register (&tsi_eth_driver);
1675         if (ret < 0){
1676                 printk("tsi108_ether_init: error initializing ethernet "
1677                        "device\n");
1678                 return ret;
1679         }
1680         return 0;
1681 }
1682
1683 static int tsi108_ether_remove(struct platform_device *pdev)
1684 {
1685         struct net_device *dev = platform_get_drvdata(pdev);
1686         struct tsi108_prv_data *priv = netdev_priv(dev);
1687
1688         unregister_netdev(dev);
1689         tsi108_stop_ethernet(dev);
1690         platform_set_drvdata(pdev, NULL);
1691         iounmap(priv->regs);
1692         iounmap(priv->phyregs);
1693         free_netdev(dev);
1694
1695         return 0;
1696 }
1697 static void tsi108_ether_exit(void)
1698 {
1699         platform_driver_unregister(&tsi_eth_driver);
1700 }
1701
1702 module_init(tsi108_ether_init);
1703 module_exit(tsi108_ether_exit);
1704
1705 MODULE_AUTHOR("Tundra Semiconductor Corporation");
1706 MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
1707 MODULE_LICENSE("GPL");