bnx2: Refine VPD logic.
[safe/jmp/linux-2.6] / drivers / net / stmmac / mac100.h
1 /*******************************************************************************
2   MAC 10/100 Header File
3
4   Copyright (C) 2007-2009  STMicroelectronics Ltd
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
23 *******************************************************************************/
24
25 /*----------------------------------------------------------------------------
26  *                              MAC BLOCK defines
27  *---------------------------------------------------------------------------*/
28 /* MAC CSR offset */
29 #define MAC_CONTROL     0x00000000      /* MAC Control */
30 #define MAC_ADDR_HIGH   0x00000004      /* MAC Address High */
31 #define MAC_ADDR_LOW    0x00000008      /* MAC Address Low */
32 #define MAC_HASH_HIGH   0x0000000c      /* Multicast Hash Table High */
33 #define MAC_HASH_LOW    0x00000010      /* Multicast Hash Table Low */
34 #define MAC_MII_ADDR    0x00000014      /* MII Address */
35 #define MAC_MII_DATA    0x00000018      /* MII Data */
36 #define MAC_FLOW_CTRL   0x0000001c      /* Flow Control */
37 #define MAC_VLAN1       0x00000020      /* VLAN1 Tag */
38 #define MAC_VLAN2       0x00000024      /* VLAN2 Tag */
39
40 /* MAC CTRL defines */
41 #define MAC_CONTROL_RA  0x80000000      /* Receive All Mode */
42 #define MAC_CONTROL_BLE 0x40000000      /* Endian Mode */
43 #define MAC_CONTROL_HBD 0x10000000      /* Heartbeat Disable */
44 #define MAC_CONTROL_PS  0x08000000      /* Port Select */
45 #define MAC_CONTROL_DRO 0x00800000      /* Disable Receive Own */
46 #define MAC_CONTROL_EXT_LOOPBACK 0x00400000     /* Reserved (ext loopback?) */
47 #define MAC_CONTROL_OM  0x00200000      /* Loopback Operating Mode */
48 #define MAC_CONTROL_F   0x00100000      /* Full Duplex Mode */
49 #define MAC_CONTROL_PM  0x00080000      /* Pass All Multicast */
50 #define MAC_CONTROL_PR  0x00040000      /* Promiscuous Mode */
51 #define MAC_CONTROL_IF  0x00020000      /* Inverse Filtering */
52 #define MAC_CONTROL_PB  0x00010000      /* Pass Bad Frames */
53 #define MAC_CONTROL_HO  0x00008000      /* Hash Only Filtering Mode */
54 #define MAC_CONTROL_HP  0x00002000      /* Hash/Perfect Filtering Mode */
55 #define MAC_CONTROL_LCC 0x00001000      /* Late Collision Control */
56 #define MAC_CONTROL_DBF 0x00000800      /* Disable Broadcast Frames */
57 #define MAC_CONTROL_DRTY        0x00000400      /* Disable Retry */
58 #define MAC_CONTROL_ASTP        0x00000100      /* Automatic Pad Stripping */
59 #define MAC_CONTROL_BOLMT_10    0x00000000      /* Back Off Limit 10 */
60 #define MAC_CONTROL_BOLMT_8     0x00000040      /* Back Off Limit 8 */
61 #define MAC_CONTROL_BOLMT_4     0x00000080      /* Back Off Limit 4 */
62 #define MAC_CONTROL_BOLMT_1     0x000000c0      /* Back Off Limit 1 */
63 #define MAC_CONTROL_DC          0x00000020      /* Deferral Check */
64 #define MAC_CONTROL_TE          0x00000008      /* Transmitter Enable */
65 #define MAC_CONTROL_RE          0x00000004      /* Receiver Enable */
66
67 #define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
68
69 /* MAC FLOW CTRL defines */
70 #define MAC_FLOW_CTRL_PT_MASK   0xffff0000      /* Pause Time Mask */
71 #define MAC_FLOW_CTRL_PT_SHIFT  16
72 #define MAC_FLOW_CTRL_PASS      0x00000004      /* Pass Control Frames */
73 #define MAC_FLOW_CTRL_ENABLE    0x00000002      /* Flow Control Enable */
74 #define MAC_FLOW_CTRL_PAUSE     0x00000001      /* Flow Control Busy ... */
75
76 /* MII ADDR  defines */
77 #define MAC_MII_ADDR_WRITE      0x00000002      /* MII Write */
78 #define MAC_MII_ADDR_BUSY       0x00000001      /* MII Busy */
79
80 /*----------------------------------------------------------------------------
81  *                              DMA BLOCK defines
82  *---------------------------------------------------------------------------*/
83
84 /* DMA Bus Mode register defines */
85 #define DMA_BUS_MODE_DBO        0x00100000      /* Descriptor Byte Ordering */
86 #define DMA_BUS_MODE_BLE        0x00000080      /* Big Endian/Little Endian */
87 #define DMA_BUS_MODE_PBL_MASK   0x00003f00      /* Programmable Burst Len */
88 #define DMA_BUS_MODE_PBL_SHIFT  8
89 #define DMA_BUS_MODE_DSL_MASK   0x0000007c      /* Descriptor Skip Length */
90 #define DMA_BUS_MODE_DSL_SHIFT  2       /*   (in DWORDS)      */
91 #define DMA_BUS_MODE_BAR_BUS    0x00000002      /* Bar-Bus Arbitration */
92 #define DMA_BUS_MODE_SFT_RESET  0x00000001      /* Software Reset */
93 #define DMA_BUS_MODE_DEFAULT    0x00000000
94
95 /* DMA Control register defines */
96 #define DMA_CONTROL_SF          0x00200000      /* Store And Forward */
97
98 /* Transmit Threshold Control */
99 enum ttc_control {
100         DMA_CONTROL_TTC_DEFAULT = 0x00000000,   /* Threshold is 32 DWORDS */
101         DMA_CONTROL_TTC_64 = 0x00004000,        /* Threshold is 64 DWORDS */
102         DMA_CONTROL_TTC_128 = 0x00008000,       /* Threshold is 128 DWORDS */
103         DMA_CONTROL_TTC_256 = 0x0000c000,       /* Threshold is 256 DWORDS */
104         DMA_CONTROL_TTC_18 = 0x00400000,        /* Threshold is 18 DWORDS */
105         DMA_CONTROL_TTC_24 = 0x00404000,        /* Threshold is 24 DWORDS */
106         DMA_CONTROL_TTC_32 = 0x00408000,        /* Threshold is 32 DWORDS */
107         DMA_CONTROL_TTC_40 = 0x0040c000,        /* Threshold is 40 DWORDS */
108         DMA_CONTROL_SE = 0x00000008,    /* Stop On Empty */
109         DMA_CONTROL_OSF = 0x00000004,   /* Operate On 2nd Frame */
110 };
111
112 /* STMAC110 DMA Missed Frame Counter register defines */
113 #define DMA_MISSED_FRAME_OVE    0x10000000      /* FIFO Overflow Overflow */
114 #define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000    /* Overflow Frame Counter */
115 #define DMA_MISSED_FRAME_OVE_M  0x00010000      /* Missed Frame Overflow */
116 #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff      /* Missed Frame Couinter */