SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/e1000e/netdev.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2009 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  30
  31 #include <linux/module.h>
  32 #include <linux/types.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/pagemap.h>
  37 #include <linux/delay.h>
  38 #include <linux/netdevice.h>
  39 #include <linux/tcp.h>
  40 #include <linux/ipv6.h>
  41 #include <linux/slab.h>
  42 #include <net/checksum.h>
  43 #include <net/ip6_checksum.h>
  44 #include <linux/mii.h>
  45 #include <linux/ethtool.h>
  46 #include <linux/if_vlan.h>
  47 #include <linux/cpu.h>
  48 #include <linux/smp.h>
  49 #include <linux/pm_qos_params.h>
  50 #include <linux/pm_runtime.h>
  51 #include <linux/aer.h>
  52
  53 #include "e1000.h"
  54
  55 #define DRV_VERSION "1.0.2-k4"
  56 char e1000e_driver_name[] = "e1000e";
  57 const char e1000e_driver_version[] = DRV_VERSION;
  58
  59 static const struct e1000_info *e1000_info_tbl[] = {
  60         [board_82571]           = &e1000_82571_info,
  61         [board_82572]           = &e1000_82572_info,
  62         [board_82573]           = &e1000_82573_info,
  63         [board_82574]           = &e1000_82574_info,
  64         [board_82583]           = &e1000_82583_info,
  65         [board_80003es2lan]     = &e1000_es2_info,
  66         [board_ich8lan]         = &e1000_ich8_info,
  67         [board_ich9lan]         = &e1000_ich9_info,
  68         [board_ich10lan]        = &e1000_ich10_info,
  69         [board_pchlan]          = &e1000_pch_info,
  70 };
  71
  72 struct e1000_reg_info {
  73         u32 ofs;
  74         char *name;
  75 };
  76
  77 #define E1000_RDFH      0x02410 /* Rx Data FIFO Head - RW */
  78 #define E1000_RDFT      0x02418 /* Rx Data FIFO Tail - RW */
  79 #define E1000_RDFHS     0x02420 /* Rx Data FIFO Head Saved - RW */
  80 #define E1000_RDFTS     0x02428 /* Rx Data FIFO Tail Saved - RW */
  81 #define E1000_RDFPC     0x02430 /* Rx Data FIFO Packet Count - RW */
  82
  83 #define E1000_TDFH      0x03410 /* Tx Data FIFO Head - RW */
  84 #define E1000_TDFT      0x03418 /* Tx Data FIFO Tail - RW */
  85 #define E1000_TDFHS     0x03420 /* Tx Data FIFO Head Saved - RW */
  86 #define E1000_TDFTS     0x03428 /* Tx Data FIFO Tail Saved - RW */
  87 #define E1000_TDFPC     0x03430 /* Tx Data FIFO Packet Count - RW */
  88
  89 static const struct e1000_reg_info e1000_reg_info_tbl[] = {
  90
  91         /* General Registers */
  92         {E1000_CTRL, "CTRL"},
  93         {E1000_STATUS, "STATUS"},
  94         {E1000_CTRL_EXT, "CTRL_EXT"},
  95
  96         /* Interrupt Registers */
  97         {E1000_ICR, "ICR"},
  98
  99         /* RX Registers */
 100         {E1000_RCTL, "RCTL"},
 101         {E1000_RDLEN, "RDLEN"},
 102         {E1000_RDH, "RDH"},
 103         {E1000_RDT, "RDT"},
 104         {E1000_RDTR, "RDTR"},
 105         {E1000_RXDCTL(0), "RXDCTL"},
 106         {E1000_ERT, "ERT"},
 107         {E1000_RDBAL, "RDBAL"},
 108         {E1000_RDBAH, "RDBAH"},
 109         {E1000_RDFH, "RDFH"},
 110         {E1000_RDFT, "RDFT"},
 111         {E1000_RDFHS, "RDFHS"},
 112         {E1000_RDFTS, "RDFTS"},
 113         {E1000_RDFPC, "RDFPC"},
 114
 115         /* TX Registers */
 116         {E1000_TCTL, "TCTL"},
 117         {E1000_TDBAL, "TDBAL"},
 118         {E1000_TDBAH, "TDBAH"},
 119         {E1000_TDLEN, "TDLEN"},
 120         {E1000_TDH, "TDH"},
 121         {E1000_TDT, "TDT"},
 122         {E1000_TIDV, "TIDV"},
 123         {E1000_TXDCTL(0), "TXDCTL"},
 124         {E1000_TADV, "TADV"},
 125         {E1000_TARC(0), "TARC"},
 126         {E1000_TDFH, "TDFH"},
 127         {E1000_TDFT, "TDFT"},
 128         {E1000_TDFHS, "TDFHS"},
 129         {E1000_TDFTS, "TDFTS"},
 130         {E1000_TDFPC, "TDFPC"},
 131
 132         /* List Terminator */
 133         {}
 134 };
 135
 136 /*
 137  * e1000_regdump - register printout routine
 138  */
 139 static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
 140 {
 141         int n = 0;
 142         char rname[16];
 143         u32 regs[8];
 144
 145         switch (reginfo->ofs) {
 146         case E1000_RXDCTL(0):
 147                 for (n = 0; n < 2; n++)
 148                         regs[n] = __er32(hw, E1000_RXDCTL(n));
 149                 break;
 150         case E1000_TXDCTL(0):
 151                 for (n = 0; n < 2; n++)
 152                         regs[n] = __er32(hw, E1000_TXDCTL(n));
 153                 break;
 154         case E1000_TARC(0):
 155                 for (n = 0; n < 2; n++)
 156                         regs[n] = __er32(hw, E1000_TARC(n));
 157                 break;
 158         default:
 159                 printk(KERN_INFO "%-15s %08x\n",
 160                         reginfo->name, __er32(hw, reginfo->ofs));
 161                 return;
 162         }
 163
 164         snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
 165         printk(KERN_INFO "%-15s ", rname);
 166         for (n = 0; n < 2; n++)
 167                 printk(KERN_CONT "%08x ", regs[n]);
 168         printk(KERN_CONT "\n");
 169 }
 170
 171
 172 /*
 173  * e1000e_dump - Print registers, tx-ring and rx-ring
 174  */
 175 static void e1000e_dump(struct e1000_adapter *adapter)
 176 {
 177         struct net_device *netdev = adapter->netdev;
 178         struct e1000_hw *hw = &adapter->hw;
 179         struct e1000_reg_info *reginfo;
 180         struct e1000_ring *tx_ring = adapter->tx_ring;
 181         struct e1000_tx_desc *tx_desc;
 182         struct my_u0 { u64 a; u64 b; } *u0;
 183         struct e1000_buffer *buffer_info;
 184         struct e1000_ring *rx_ring = adapter->rx_ring;
 185         union e1000_rx_desc_packet_split *rx_desc_ps;
 186         struct e1000_rx_desc *rx_desc;
 187         struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1;
 188         u32 staterr;
 189         int i = 0;
 190
 191         if (!netif_msg_hw(adapter))
 192                 return;
 193
 194         /* Print netdevice Info */
 195         if (netdev) {
 196                 dev_info(&adapter->pdev->dev, "Net device Info\n");
 197                 printk(KERN_INFO "Device Name     state            "
 198                         "trans_start      last_rx\n");
 199                 printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
 200                         netdev->name,
 201                         netdev->state,
 202                         netdev->trans_start,
 203                         netdev->last_rx);
 204         }
 205
 206         /* Print Registers */
 207         dev_info(&adapter->pdev->dev, "Register Dump\n");
 208         printk(KERN_INFO " Register Name   Value\n");
 209         for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
 210              reginfo->name; reginfo++) {
 211                 e1000_regdump(hw, reginfo);
 212         }
 213
 214         /* Print TX Ring Summary */
 215         if (!netdev || !netif_running(netdev))
 216                 goto exit;
 217
 218         dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
 219         printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma  ]"
 220                 " leng ntw timestamp\n");
 221         buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
 222         printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
 223                 0, tx_ring->next_to_use, tx_ring->next_to_clean,
 224                 (u64)buffer_info->dma,
 225                 buffer_info->length,
 226                 buffer_info->next_to_watch,
 227                 (u64)buffer_info->time_stamp);
 228
 229         /* Print TX Rings */
 230         if (!netif_msg_tx_done(adapter))
 231                 goto rx_ring_summary;
 232
 233         dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
 234
 235         /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
 236          *
 237          * Legacy Transmit Descriptor
 238          *   +--------------------------------------------------------------+
 239          * 0 |         Buffer Address [63:0] (Reserved on Write Back)       |
 240          *   +--------------------------------------------------------------+
 241          * 8 | Special  |    CSS     | Status |  CMD    |  CSO   |  Length  |
 242          *   +--------------------------------------------------------------+
 243          *   63       48 47        36 35    32 31     24 23    16 15        0
 244          *
 245          * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
 246          *   63      48 47    40 39       32 31             16 15    8 7      0
 247          *   +----------------------------------------------------------------+
 248          * 0 |  TUCSE  | TUCS0  |   TUCSS   |     IPCSE       | IPCS0 | IPCSS |
 249          *   +----------------------------------------------------------------+
 250          * 8 |   MSS   | HDRLEN | RSV | STA | TUCMD | DTYP |      PAYLEN      |
 251          *   +----------------------------------------------------------------+
 252          *   63      48 47    40 39 36 35 32 31   24 23  20 19                0
 253          *
 254          * Extended Data Descriptor (DTYP=0x1)
 255          *   +----------------------------------------------------------------+
 256          * 0 |                     Buffer Address [63:0]                      |
 257          *   +----------------------------------------------------------------+
 258          * 8 | VLAN tag |  POPTS  | Rsvd | Status | Command | DTYP |  DTALEN  |
 259          *   +----------------------------------------------------------------+
 260          *   63       48 47     40 39  36 35    32 31     24 23  20 19        0
 261          */
 262         printk(KERN_INFO "Tl[desc]     [address 63:0  ] [SpeCssSCmCsLen]"
 263                 " [bi->dma       ] leng  ntw timestamp        bi->skb "
 264                 "<-- Legacy format\n");
 265         printk(KERN_INFO "Tc[desc]     [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
 266                 " [bi->dma       ] leng  ntw timestamp        bi->skb "
 267                 "<-- Ext Context format\n");
 268         printk(KERN_INFO "Td[desc]     [address 63:0  ] [VlaPoRSCm1Dlen]"
 269                 " [bi->dma       ] leng  ntw timestamp        bi->skb "
 270                 "<-- Ext Data format\n");
 271         for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
 272                 tx_desc = E1000_TX_DESC(*tx_ring, i);
 273                 buffer_info = &tx_ring->buffer_info[i];
 274                 u0 = (struct my_u0 *)tx_desc;
 275                 printk(KERN_INFO "T%c[0x%03X]    %016llX %016llX %016llX "
 276                         "%04X  %3X %016llX %p",
 277                        (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' :
 278                         ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i,
 279                        le64_to_cpu(u0->a), le64_to_cpu(u0->b),
 280                        (u64)buffer_info->dma, buffer_info->length,
 281                        buffer_info->next_to_watch, (u64)buffer_info->time_stamp,
 282                        buffer_info->skb);
 283                 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
 284                         printk(KERN_CONT " NTC/U\n");
 285                 else if (i == tx_ring->next_to_use)
 286                         printk(KERN_CONT " NTU\n");
 287                 else if (i == tx_ring->next_to_clean)
 288                         printk(KERN_CONT " NTC\n");
 289                 else
 290                         printk(KERN_CONT "\n");
 291
 292                 if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
 293                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
 294                                         16, 1, phys_to_virt(buffer_info->dma),
 295                                         buffer_info->length, true);
 296         }
 297
 298         /* Print RX Rings Summary */
 299 rx_ring_summary:
 300         dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
 301         printk(KERN_INFO "Queue [NTU] [NTC]\n");
 302         printk(KERN_INFO " %5d %5X %5X\n", 0,
 303                 rx_ring->next_to_use, rx_ring->next_to_clean);
 304
 305         /* Print RX Rings */
 306         if (!netif_msg_rx_status(adapter))
 307                 goto exit;
 308
 309         dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
 310         switch (adapter->rx_ps_pages) {
 311         case 1:
 312         case 2:
 313         case 3:
 314                 /* [Extended] Packet Split Receive Descriptor Format
 315                  *
 316                  *    +-----------------------------------------------------+
 317                  *  0 |                Buffer Address 0 [63:0]              |
 318                  *    +-----------------------------------------------------+
 319                  *  8 |                Buffer Address 1 [63:0]              |
 320                  *    +-----------------------------------------------------+
 321                  * 16 |                Buffer Address 2 [63:0]              |
 322                  *    +-----------------------------------------------------+
 323                  * 24 |                Buffer Address 3 [63:0]              |
 324                  *    +-----------------------------------------------------+
 325                  */
 326                 printk(KERN_INFO "R  [desc]      [buffer 0 63:0 ] "
 327                         "[buffer 1 63:0 ] "
 328                        "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma       ] "
 329                        "[bi->skb] <-- Ext Pkt Split format\n");
 330                 /* [Extended] Receive Descriptor (Write-Back) Format
 331                  *
 332                  *   63       48 47    32 31     13 12    8 7    4 3        0
 333                  *   +------------------------------------------------------+
 334                  * 0 | Packet   | IP     |  Rsvd   | MRQ   | Rsvd | MRQ RSS |
 335                  *   | Checksum | Ident  |         | Queue |      |  Type   |
 336                  *   +------------------------------------------------------+
 337                  * 8 | VLAN Tag | Length | Extended Error | Extended Status |
 338                  *   +------------------------------------------------------+
 339                  *   63       48 47    32 31            20 19               0
 340                  */
 341                 printk(KERN_INFO "RWB[desc]      [ck ipid mrqhsh] "
 342                         "[vl   l0 ee  es] "
 343                        "[ l3  l2  l1 hs] [reserved      ] ---------------- "
 344                        "[bi->skb] <-- Ext Rx Write-Back format\n");
 345                 for (i = 0; i < rx_ring->count; i++) {
 346                         buffer_info = &rx_ring->buffer_info[i];
 347                         rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
 348                         u1 = (struct my_u1 *)rx_desc_ps;
 349                         staterr =
 350                                 le32_to_cpu(rx_desc_ps->wb.middle.status_error);
 351                         if (staterr & E1000_RXD_STAT_DD) {
 352                                 /* Descriptor Done */
 353                                 printk(KERN_INFO "RWB[0x%03X]     %016llX "
 354                                         "%016llX %016llX %016llX "
 355                                         "---------------- %p", i,
 356                                         le64_to_cpu(u1->a),
 357                                         le64_to_cpu(u1->b),
 358                                         le64_to_cpu(u1->c),
 359                                         le64_to_cpu(u1->d),
 360                                         buffer_info->skb);
 361                         } else {
 362                                 printk(KERN_INFO "R  [0x%03X]     %016llX "
 363                                         "%016llX %016llX %016llX %016llX %p", i,
 364                                         le64_to_cpu(u1->a),
 365                                         le64_to_cpu(u1->b),
 366                                         le64_to_cpu(u1->c),
 367                                         le64_to_cpu(u1->d),
 368                                         (u64)buffer_info->dma,
 369                                         buffer_info->skb);
 370
 371                                 if (netif_msg_pktdata(adapter))
 372                                         print_hex_dump(KERN_INFO, "",
 373                                                 DUMP_PREFIX_ADDRESS, 16, 1,
 374                                                 phys_to_virt(buffer_info->dma),
 375                                                 adapter->rx_ps_bsize0, true);
 376                         }
 377
 378                         if (i == rx_ring->next_to_use)
 379                                 printk(KERN_CONT " NTU\n");
 380                         else if (i == rx_ring->next_to_clean)
 381                                 printk(KERN_CONT " NTC\n");
 382                         else
 383                                 printk(KERN_CONT "\n");
 384                 }
 385                 break;
 386         default:
 387         case 0:
 388                 /* Legacy Receive Descriptor Format
 389                  *
 390                  * +-----------------------------------------------------+
 391                  * |                Buffer Address [63:0]                |
 392                  * +-----------------------------------------------------+
 393                  * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
 394                  * +-----------------------------------------------------+
 395                  * 63       48 47    40 39      32 31         16 15      0
 396                  */
 397                 printk(KERN_INFO "Rl[desc]     [address 63:0  ] "
 398                         "[vl er S cks ln] [bi->dma       ] [bi->skb] "
 399                         "<-- Legacy format\n");
 400                 for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
 401                         rx_desc = E1000_RX_DESC(*rx_ring, i);
 402                         buffer_info = &rx_ring->buffer_info[i];
 403                         u0 = (struct my_u0 *)rx_desc;
 404                         printk(KERN_INFO "Rl[0x%03X]    %016llX %016llX "
 405                                 "%016llX %p",
 406                                 i, le64_to_cpu(u0->a), le64_to_cpu(u0->b),
 407                                 (u64)buffer_info->dma, buffer_info->skb);
 408                         if (i == rx_ring->next_to_use)
 409                                 printk(KERN_CONT " NTU\n");
 410                         else if (i == rx_ring->next_to_clean)
 411                                 printk(KERN_CONT " NTC\n");
 412                         else
 413                                 printk(KERN_CONT "\n");
 414
 415                         if (netif_msg_pktdata(adapter))
 416                                 print_hex_dump(KERN_INFO, "",
 417                                         DUMP_PREFIX_ADDRESS,
 418                                         16, 1, phys_to_virt(buffer_info->dma),
 419                                         adapter->rx_buffer_len, true);
 420                 }
 421         }
 422
 423 exit:
 424         return;
 425 }
 426
 427 /**
 428  * e1000_desc_unused - calculate if we have unused descriptors
 429  **/
 430 static int e1000_desc_unused(struct e1000_ring *ring)
 431 {
 432         if (ring->next_to_clean > ring->next_to_use)
 433                 return ring->next_to_clean - ring->next_to_use - 1;
 434
 435         return ring->count + ring->next_to_clean - ring->next_to_use - 1;
 436 }
 437
 438 /**
 439  * e1000_receive_skb - helper function to handle Rx indications
 440  * @adapter: board private structure
 441  * @status: descriptor status field as written by hardware
 442  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
 443  * @skb: pointer to sk_buff to be indicated to stack
 444  **/
 445 static void e1000_receive_skb(struct e1000_adapter *adapter,
 446                               struct net_device *netdev,
 447                               struct sk_buff *skb,
 448                               u8 status, __le16 vlan)
 449 {
 450         skb->protocol = eth_type_trans(skb, netdev);
 451
 452         if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
 453                 vlan_gro_receive(&adapter->napi, adapter->vlgrp,
 454                                  le16_to_cpu(vlan), skb);
 455         else
 456                 napi_gro_receive(&adapter->napi, skb);
 457 }
 458
 459 /**
 460  * e1000_rx_checksum - Receive Checksum Offload for 82543
 461  * @adapter:     board private structure
 462  * @status_err:  receive descriptor status and error fields
 463  * @csum:       receive descriptor csum field
 464  * @sk_buff:     socket buffer with received data
 465  **/
 466 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 467                               u32 csum, struct sk_buff *skb)
 468 {
 469         u16 status = (u16)status_err;
 470         u8 errors = (u8)(status_err >> 24);
 471         skb->ip_summed = CHECKSUM_NONE;
 472
 473         /* Ignore Checksum bit is set */
 474         if (status & E1000_RXD_STAT_IXSM)
 475                 return;
 476         /* TCP/UDP checksum error bit is set */
 477         if (errors & E1000_RXD_ERR_TCPE) {
 478                 /* let the stack verify checksum errors */
 479                 adapter->hw_csum_err++;
 480                 return;
 481         }
 482
 483         /* TCP/UDP Checksum has not been calculated */
 484         if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
 485                 return;
 486
 487         /* It must be a TCP or UDP packet with a valid checksum */
 488         if (status & E1000_RXD_STAT_TCPCS) {
 489                 /* TCP checksum is good */
 490                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 491         } else {
 492                 /*
 493                  * IP fragment with UDP payload
 494                  * Hardware complements the payload checksum, so we undo it
 495                  * and then put the value in host order for further stack use.
 496                  */
 497                 __sum16 sum = (__force __sum16)htons(csum);
 498                 skb->csum = csum_unfold(~sum);
 499                 skb->ip_summed = CHECKSUM_COMPLETE;
 500         }
 501         adapter->hw_csum_good++;
 502 }
 503
 504 /**
 505  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
 506  * @adapter: address of board private structure
 507  **/
 508 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 509                                    int cleaned_count)
 510 {
 511         struct net_device *netdev = adapter->netdev;
 512         struct pci_dev *pdev = adapter->pdev;
 513         struct e1000_ring *rx_ring = adapter->rx_ring;
 514         struct e1000_rx_desc *rx_desc;
 515         struct e1000_buffer *buffer_info;
 516         struct sk_buff *skb;
 517         unsigned int i;
 518         unsigned int bufsz = adapter->rx_buffer_len;
 519
 520         i = rx_ring->next_to_use;
 521         buffer_info = &rx_ring->buffer_info[i];
 522
 523         while (cleaned_count--) {
 524                 skb = buffer_info->skb;
 525                 if (skb) {
 526                         skb_trim(skb, 0);
 527                         goto map_skb;
 528                 }
 529
 530                 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 531                 if (!skb) {
 532                         /* Better luck next round */
 533                         adapter->alloc_rx_buff_failed++;
 534                         break;
 535                 }
 536
 537                 buffer_info->skb = skb;
 538 map_skb:
 539                 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
 540                                                   adapter->rx_buffer_len,
 541                                                   DMA_FROM_DEVICE);
 542                 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
 543                         dev_err(&pdev->dev, "RX DMA map failed\n");
 544                         adapter->rx_dma_failed++;
 545                         break;
 546                 }
 547
 548                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 549                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 550
 551                 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
 552                         /*
 553                          * Force memory writes to complete before letting h/w
 554                          * know there are new descriptors to fetch.  (Only
 555                          * applicable for weak-ordered memory model archs,
 556                          * such as IA-64).
 557                          */
 558                         wmb();
 559                         writel(i, adapter->hw.hw_addr + rx_ring->tail);
 560                 }
 561                 i++;
 562                 if (i == rx_ring->count)
 563                         i = 0;
 564                 buffer_info = &rx_ring->buffer_info[i];
 565         }
 566
 567         rx_ring->next_to_use = i;
 568 }
 569
 570 /**
 571  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
 572  * @adapter: address of board private structure
 573  **/
 574 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 575                                       int cleaned_count)
 576 {
 577         struct net_device *netdev = adapter->netdev;
 578         struct pci_dev *pdev = adapter->pdev;
 579         union e1000_rx_desc_packet_split *rx_desc;
 580         struct e1000_ring *rx_ring = adapter->rx_ring;
 581         struct e1000_buffer *buffer_info;
 582         struct e1000_ps_page *ps_page;
 583         struct sk_buff *skb;
 584         unsigned int i, j;
 585
 586         i = rx_ring->next_to_use;
 587         buffer_info = &rx_ring->buffer_info[i];
 588
 589         while (cleaned_count--) {
 590                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 591
 592                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 593                         ps_page = &buffer_info->ps_pages[j];
 594                         if (j >= adapter->rx_ps_pages) {
 595                                 /* all unused desc entries get hw null ptr */
 596                                 rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
 597                                 continue;
 598                         }
 599                         if (!ps_page->page) {
 600                                 ps_page->page = alloc_page(GFP_ATOMIC);
 601                                 if (!ps_page->page) {
 602                                         adapter->alloc_rx_buff_failed++;
 603                                         goto no_buffers;
 604                                 }
 605                                 ps_page->dma = dma_map_page(&pdev->dev,
 606                                                             ps_page->page,
 607                                                             0, PAGE_SIZE,
 608                                                             DMA_FROM_DEVICE);
 609                                 if (dma_mapping_error(&pdev->dev,
 610                                                       ps_page->dma)) {
 611                                         dev_err(&adapter->pdev->dev,
 612                                           "RX DMA page map failed\n");
 613                                         adapter->rx_dma_failed++;
 614                                         goto no_buffers;
 615                                 }
 616                         }
 617                         /*
 618                          * Refresh the desc even if buffer_addrs
 619                          * didn't change because each write-back
 620                          * erases this info.
 621                          */
 622                         rx_desc->read.buffer_addr[j+1] =
 623                              cpu_to_le64(ps_page->dma);
 624                 }
 625
 626                 skb = netdev_alloc_skb_ip_align(netdev,
 627                                                 adapter->rx_ps_bsize0);
 628
 629                 if (!skb) {
 630                         adapter->alloc_rx_buff_failed++;
 631                         break;
 632                 }
 633
 634                 buffer_info->skb = skb;
 635                 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
 636                                                   adapter->rx_ps_bsize0,
 637                                                   DMA_FROM_DEVICE);
 638                 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
 639                         dev_err(&pdev->dev, "RX DMA map failed\n");
 640                         adapter->rx_dma_failed++;
 641                         /* cleanup skb */
 642                         dev_kfree_skb_any(skb);
 643                         buffer_info->skb = NULL;
 644                         break;
 645                 }
 646
 647                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
 648
 649                 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
 650                         /*
 651                          * Force memory writes to complete before letting h/w
 652                          * know there are new descriptors to fetch.  (Only
 653                          * applicable for weak-ordered memory model archs,
 654                          * such as IA-64).
 655                          */
 656                         wmb();
 657                         writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
 658                 }
 659
 660                 i++;
 661                 if (i == rx_ring->count)
 662                         i = 0;
 663                 buffer_info = &rx_ring->buffer_info[i];
 664         }
 665
 666 no_buffers:
 667         rx_ring->next_to_use = i;
 668 }
 669
 670 /**
 671  * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
 672  * @adapter: address of board private structure
 673  * @cleaned_count: number of buffers to allocate this pass
 674  **/
 675
 676 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 677                                          int cleaned_count)
 678 {
 679         struct net_device *netdev = adapter->netdev;
 680         struct pci_dev *pdev = adapter->pdev;
 681         struct e1000_rx_desc *rx_desc;
 682         struct e1000_ring *rx_ring = adapter->rx_ring;
 683         struct e1000_buffer *buffer_info;
 684         struct sk_buff *skb;
 685         unsigned int i;
 686         unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 687
 688         i = rx_ring->next_to_use;
 689         buffer_info = &rx_ring->buffer_info[i];
 690
 691         while (cleaned_count--) {
 692                 skb = buffer_info->skb;
 693                 if (skb) {
 694                         skb_trim(skb, 0);
 695                         goto check_page;
 696                 }
 697
 698                 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 699                 if (unlikely(!skb)) {
 700                         /* Better luck next round */
 701                         adapter->alloc_rx_buff_failed++;
 702                         break;
 703                 }
 704
 705                 buffer_info->skb = skb;
 706 check_page:
 707                 /* allocate a new page if necessary */
 708                 if (!buffer_info->page) {
 709                         buffer_info->page = alloc_page(GFP_ATOMIC);
 710                         if (unlikely(!buffer_info->page)) {
 711                                 adapter->alloc_rx_buff_failed++;
 712                                 break;
 713                         }
 714                 }
 715
 716                 if (!buffer_info->dma)
 717                         buffer_info->dma = dma_map_page(&pdev->dev,
 718                                                         buffer_info->page, 0,
 719                                                         PAGE_SIZE,
 720                                                         DMA_FROM_DEVICE);
 721
 722                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 723                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 724
 725                 if (unlikely(++i == rx_ring->count))
 726                         i = 0;
 727                 buffer_info = &rx_ring->buffer_info[i];
 728         }
 729
 730         if (likely(rx_ring->next_to_use != i)) {
 731                 rx_ring->next_to_use = i;
 732                 if (unlikely(i-- == 0))
 733                         i = (rx_ring->count - 1);
 734
 735                 /* Force memory writes to complete before letting h/w
 736                  * know there are new descriptors to fetch.  (Only
 737                  * applicable for weak-ordered memory model archs,
 738                  * such as IA-64). */
 739                 wmb();
 740                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 741         }
 742 }
 743
 744 /**
 745  * e1000_clean_rx_irq - Send received data up the network stack; legacy
 746  * @adapter: board private structure
 747  *
 748  * the return value indicates whether actual cleaning was done, there
 749  * is no guarantee that everything was cleaned
 750  **/
 751 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 752                                int *work_done, int work_to_do)
 753 {
 754         struct net_device *netdev = adapter->netdev;
 755         struct pci_dev *pdev = adapter->pdev;
 756         struct e1000_hw *hw = &adapter->hw;
 757         struct e1000_ring *rx_ring = adapter->rx_ring;
 758         struct e1000_rx_desc *rx_desc, *next_rxd;
 759         struct e1000_buffer *buffer_info, *next_buffer;
 760         u32 length;
 761         unsigned int i;
 762         int cleaned_count = 0;
 763         bool cleaned = 0;
 764         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 765
 766         i = rx_ring->next_to_clean;
 767         rx_desc = E1000_RX_DESC(*rx_ring, i);
 768         buffer_info = &rx_ring->buffer_info[i];
 769
 770         while (rx_desc->status & E1000_RXD_STAT_DD) {
 771                 struct sk_buff *skb;
 772                 u8 status;
 773
 774                 if (*work_done >= work_to_do)
 775                         break;
 776                 (*work_done)++;
 777
 778                 status = rx_desc->status;
 779                 skb = buffer_info->skb;
 780                 buffer_info->skb = NULL;
 781
 782                 prefetch(skb->data - NET_IP_ALIGN);
 783
 784                 i++;
 785                 if (i == rx_ring->count)
 786                         i = 0;
 787                 next_rxd = E1000_RX_DESC(*rx_ring, i);
 788                 prefetch(next_rxd);
 789
 790                 next_buffer = &rx_ring->buffer_info[i];
 791
 792                 cleaned = 1;
 793                 cleaned_count++;
 794                 dma_unmap_single(&pdev->dev,
 795                                  buffer_info->dma,
 796                                  adapter->rx_buffer_len,
 797                                  DMA_FROM_DEVICE);
 798                 buffer_info->dma = 0;
 799
 800                 length = le16_to_cpu(rx_desc->length);
 801
 802                 /*
 803                  * !EOP means multiple descriptors were used to store a single
 804                  * packet, if that's the case we need to toss it.  In fact, we
 805                  * need to toss every packet with the EOP bit clear and the
 806                  * next frame that _does_ have the EOP bit set, as it is by
 807                  * definition only a frame fragment
 808                  */
 809                 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
 810                         adapter->flags2 |= FLAG2_IS_DISCARDING;
 811
 812                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 813                         /* All receives must fit into a single buffer */
 814                         e_dbg("Receive packet consumed multiple buffers\n");
 815                         /* recycle */
 816                         buffer_info->skb = skb;
 817                         if (status & E1000_RXD_STAT_EOP)
 818                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 819                         goto next_desc;
 820                 }
 821
 822                 if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
 823                         /* recycle */
 824                         buffer_info->skb = skb;
 825                         goto next_desc;
 826                 }
 827
 828                 /* adjust length to remove Ethernet CRC */
 829                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
 830                         length -= 4;
 831
 832                 total_rx_bytes += length;
 833                 total_rx_packets++;
 834
 835                 /*
 836                  * code added for copybreak, this should improve
 837                  * performance for small packets with large amounts
 838                  * of reassembly being done in the stack
 839                  */
 840                 if (length < copybreak) {
 841                         struct sk_buff *new_skb =
 842                             netdev_alloc_skb_ip_align(netdev, length);
 843                         if (new_skb) {
 844                                 skb_copy_to_linear_data_offset(new_skb,
 845                                                                -NET_IP_ALIGN,
 846                                                                (skb->data -
 847                                                                 NET_IP_ALIGN),
 848                                                                (length +
 849                                                                 NET_IP_ALIGN));
 850                                 /* save the skb in buffer_info as good */
 851                                 buffer_info->skb = skb;
 852                                 skb = new_skb;
 853                         }
 854                         /* else just continue with the old one */
 855                 }
 856                 /* end copybreak code */
 857                 skb_put(skb, length);
 858
 859                 /* Receive Checksum Offload */
 860                 e1000_rx_checksum(adapter,
 861                                   (u32)(status) |
 862                                   ((u32)(rx_desc->errors) << 24),
 863                                   le16_to_cpu(rx_desc->csum), skb);
 864
 865                 e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
 866
 867 next_desc:
 868                 rx_desc->status = 0;
 869
 870                 /* return some buffers to hardware, one at a time is too slow */
 871                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 872                         adapter->alloc_rx_buf(adapter, cleaned_count);
 873                         cleaned_count = 0;
 874                 }
 875
 876                 /* use prefetched values */
 877                 rx_desc = next_rxd;
 878                 buffer_info = next_buffer;
 879         }
 880         rx_ring->next_to_clean = i;
 881
 882         cleaned_count = e1000_desc_unused(rx_ring);
 883         if (cleaned_count)
 884                 adapter->alloc_rx_buf(adapter, cleaned_count);
 885
 886         adapter->total_rx_bytes += total_rx_bytes;
 887         adapter->total_rx_packets += total_rx_packets;
 888         netdev->stats.rx_bytes += total_rx_bytes;
 889         netdev->stats.rx_packets += total_rx_packets;
 890         return cleaned;
 891 }
 892
 893 static void e1000_put_txbuf(struct e1000_adapter *adapter,
 894                              struct e1000_buffer *buffer_info)
 895 {
 896         if (buffer_info->dma) {
 897                 if (buffer_info->mapped_as_page)
 898                         dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
 899                                        buffer_info->length, DMA_TO_DEVICE);
 900                 else
 901                         dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
 902                                          buffer_info->length, DMA_TO_DEVICE);
 903                 buffer_info->dma = 0;
 904         }
 905         if (buffer_info->skb) {
 906                 dev_kfree_skb_any(buffer_info->skb);
 907                 buffer_info->skb = NULL;
 908         }
 909         buffer_info->time_stamp = 0;
 910 }
 911
 912 static void e1000_print_hw_hang(struct work_struct *work)
 913 {
 914         struct e1000_adapter *adapter = container_of(work,
 915                                                      struct e1000_adapter,
 916                                                      print_hang_task);
 917         struct e1000_ring *tx_ring = adapter->tx_ring;
 918         unsigned int i = tx_ring->next_to_clean;
 919         unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 920         struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
 921         struct e1000_hw *hw = &adapter->hw;
 922         u16 phy_status, phy_1000t_status, phy_ext_status;
 923         u16 pci_status;
 924
 925         e1e_rphy(hw, PHY_STATUS, &phy_status);
 926         e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
 927         e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
 928
 929         pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
 930
 931         /* detected Hardware unit hang */
 932         e_err("Detected Hardware Unit Hang:\n"
 933               "  TDH                  <%x>\n"
 934               "  TDT                  <%x>\n"
 935               "  next_to_use          <%x>\n"
 936               "  next_to_clean        <%x>\n"
 937               "buffer_info[next_to_clean]:\n"
 938               "  time_stamp           <%lx>\n"
 939               "  next_to_watch        <%x>\n"
 940               "  jiffies              <%lx>\n"
 941               "  next_to_watch.status <%x>\n"
 942               "MAC Status             <%x>\n"
 943               "PHY Status             <%x>\n"
 944               "PHY 1000BASE-T Status  <%x>\n"
 945               "PHY Extended Status    <%x>\n"
 946               "PCI Status             <%x>\n",
 947               readl(adapter->hw.hw_addr + tx_ring->head),
 948               readl(adapter->hw.hw_addr + tx_ring->tail),
 949               tx_ring->next_to_use,
 950               tx_ring->next_to_clean,
 951               tx_ring->buffer_info[eop].time_stamp,
 952               eop,
 953               jiffies,
 954               eop_desc->upper.fields.status,
 955               er32(STATUS),
 956               phy_status,
 957               phy_1000t_status,
 958               phy_ext_status,
 959               pci_status);
 960 }
 961
 962 /**
 963  * e1000_clean_tx_irq - Reclaim resources after transmit completes
 964  * @adapter: board private structure
 965  *
 966  * the return value indicates whether actual cleaning was done, there
 967  * is no guarantee that everything was cleaned
 968  **/
 969 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 970 {
 971         struct net_device *netdev = adapter->netdev;
 972         struct e1000_hw *hw = &adapter->hw;
 973         struct e1000_ring *tx_ring = adapter->tx_ring;
 974         struct e1000_tx_desc *tx_desc, *eop_desc;
 975         struct e1000_buffer *buffer_info;
 976         unsigned int i, eop;
 977         unsigned int count = 0;
 978         unsigned int total_tx_bytes = 0, total_tx_packets = 0;
 979
 980         i = tx_ring->next_to_clean;
 981         eop = tx_ring->buffer_info[i].next_to_watch;
 982         eop_desc = E1000_TX_DESC(*tx_ring, eop);
 983
 984         while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 985                (count < tx_ring->count)) {
 986                 bool cleaned = false;
 987                 for (; !cleaned; count++) {
 988                         tx_desc = E1000_TX_DESC(*tx_ring, i);
 989                         buffer_info = &tx_ring->buffer_info[i];
 990                         cleaned = (i == eop);
 991
 992                         if (cleaned) {
 993                                 total_tx_packets += buffer_info->segs;
 994                                 total_tx_bytes += buffer_info->bytecount;
 995                         }
 996
 997                         e1000_put_txbuf(adapter, buffer_info);
 998                         tx_desc->upper.data = 0;
 999
1000                         i++;
1001                         if (i == tx_ring->count)
1002                                 i = 0;
1003                 }
1004
1005                 if (i == tx_ring->next_to_use)
1006                         break;
1007                 eop = tx_ring->buffer_info[i].next_to_watch;
1008                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1009         }
1010
1011         tx_ring->next_to_clean = i;
1012
1013 #define TX_WAKE_THRESHOLD 32
1014         if (count && netif_carrier_ok(netdev) &&
1015             e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
1016                 /* Make sure that anybody stopping the queue after this
1017                  * sees the new next_to_clean.
1018                  */
1019                 smp_mb();
1020
1021                 if (netif_queue_stopped(netdev) &&
1022                     !(test_bit(__E1000_DOWN, &adapter->state))) {
1023                         netif_wake_queue(netdev);
1024                         ++adapter->restart_queue;
1025                 }
1026         }
1027
1028         if (adapter->detect_tx_hung) {
1029                 /*
1030                  * Detect a transmit hang in hardware, this serializes the
1031                  * check with the clearing of time_stamp and movement of i
1032                  */
1033                 adapter->detect_tx_hung = 0;
1034                 if (tx_ring->buffer_info[i].time_stamp &&
1035                     time_after(jiffies, tx_ring->buffer_info[i].time_stamp
1036                                + (adapter->tx_timeout_factor * HZ)) &&
1037                     !(er32(STATUS) & E1000_STATUS_TXOFF)) {
1038                         schedule_work(&adapter->print_hang_task);
1039                         netif_stop_queue(netdev);
1040                 }
1041         }
1042         adapter->total_tx_bytes += total_tx_bytes;
1043         adapter->total_tx_packets += total_tx_packets;
1044         netdev->stats.tx_bytes += total_tx_bytes;
1045         netdev->stats.tx_packets += total_tx_packets;
1046         return (count < tx_ring->count);
1047 }
1048
1049 /**
1050  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
1051  * @adapter: board private structure
1052  *
1053  * the return value indicates whether actual cleaning was done, there
1054  * is no guarantee that everything was cleaned
1055  **/
1056 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
1057                                   int *work_done, int work_to_do)
1058 {
1059         struct e1000_hw *hw = &adapter->hw;
1060         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
1061         struct net_device *netdev = adapter->netdev;
1062         struct pci_dev *pdev = adapter->pdev;
1063         struct e1000_ring *rx_ring = adapter->rx_ring;
1064         struct e1000_buffer *buffer_info, *next_buffer;
1065         struct e1000_ps_page *ps_page;
1066         struct sk_buff *skb;
1067         unsigned int i, j;
1068         u32 length, staterr;
1069         int cleaned_count = 0;
1070         bool cleaned = 0;
1071         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1072
1073         i = rx_ring->next_to_clean;
1074         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
1075         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1076         buffer_info = &rx_ring->buffer_info[i];
1077
1078         while (staterr & E1000_RXD_STAT_DD) {
1079                 if (*work_done >= work_to_do)
1080                         break;
1081                 (*work_done)++;
1082                 skb = buffer_info->skb;
1083
1084                 /* in the packet split case this is header only */
1085                 prefetch(skb->data - NET_IP_ALIGN);
1086
1087                 i++;
1088                 if (i == rx_ring->count)
1089                         i = 0;
1090                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
1091                 prefetch(next_rxd);
1092
1093                 next_buffer = &rx_ring->buffer_info[i];
1094
1095                 cleaned = 1;
1096                 cleaned_count++;
1097                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1098                                  adapter->rx_ps_bsize0,
1099                                  DMA_FROM_DEVICE);
1100                 buffer_info->dma = 0;
1101
1102                 /* see !EOP comment in other rx routine */
1103                 if (!(staterr & E1000_RXD_STAT_EOP))
1104                         adapter->flags2 |= FLAG2_IS_DISCARDING;
1105
1106                 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
1107                         e_dbg("Packet Split buffers didn't pick up the full "
1108                               "packet\n");
1109                         dev_kfree_skb_irq(skb);
1110                         if (staterr & E1000_RXD_STAT_EOP)
1111                                 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1112                         goto next_desc;
1113                 }
1114
1115                 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
1116                         dev_kfree_skb_irq(skb);
1117                         goto next_desc;
1118                 }
1119
1120                 length = le16_to_cpu(rx_desc->wb.middle.length0);
1121
1122                 if (!length) {
1123                         e_dbg("Last part of the packet spanning multiple "
1124                               "descriptors\n");
1125                         dev_kfree_skb_irq(skb);
1126                         goto next_desc;
1127                 }
1128
1129                 /* Good Receive */
1130                 skb_put(skb, length);
1131
1132                 {
1133                 /*
1134                  * this looks ugly, but it seems compiler issues make it
1135                  * more efficient than reusing j
1136                  */
1137                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
1138
1139                 /*
1140                  * page alloc/put takes too long and effects small packet
1141                  * throughput, so unsplit small packets and save the alloc/put
1142                  * only valid in softirq (napi) context to call kmap_*
1143                  */
1144                 if (l1 && (l1 <= copybreak) &&
1145                     ((length + l1) <= adapter->rx_ps_bsize0)) {
1146                         u8 *vaddr;
1147
1148                         ps_page = &buffer_info->ps_pages[0];
1149
1150                         /*
1151                          * there is no documentation about how to call
1152                          * kmap_atomic, so we can't hold the mapping
1153                          * very long
1154                          */
1155                         dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
1156                                                 PAGE_SIZE, DMA_FROM_DEVICE);
1157                         vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
1158                         memcpy(skb_tail_pointer(skb), vaddr, l1);
1159                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
1160                         dma_sync_single_for_device(&pdev->dev, ps_page->dma,
1161                                                    PAGE_SIZE, DMA_FROM_DEVICE);
1162
1163                         /* remove the CRC */
1164                         if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1165                                 l1 -= 4;
1166
1167                         skb_put(skb, l1);
1168                         goto copydone;
1169                 } /* if */
1170                 }
1171
1172                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1173                         length = le16_to_cpu(rx_desc->wb.upper.length[j]);
1174                         if (!length)
1175                                 break;
1176
1177                         ps_page = &buffer_info->ps_pages[j];
1178                         dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1179                                        DMA_FROM_DEVICE);
1180                         ps_page->dma = 0;
1181                         skb_fill_page_desc(skb, j, ps_page->page, 0, length);
1182                         ps_page->page = NULL;
1183                         skb->len += length;
1184                         skb->data_len += length;
1185                         skb->truesize += length;
1186                 }
1187
1188                 /* strip the ethernet crc, problem is we're using pages now so
1189                  * this whole operation can get a little cpu intensive
1190                  */
1191                 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1192                         pskb_trim(skb, skb->len - 4);
1193
1194 copydone:
1195                 total_rx_bytes += skb->len;
1196                 total_rx_packets++;
1197
1198                 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
1199                         rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
1200
1201                 if (rx_desc->wb.upper.header_status &
1202                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
1203                         adapter->rx_hdr_split++;
1204
1205                 e1000_receive_skb(adapter, netdev, skb,
1206                                   staterr, rx_desc->wb.middle.vlan);
1207
1208 next_desc:
1209                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
1210                 buffer_info->skb = NULL;
1211
1212                 /* return some buffers to hardware, one at a time is too slow */
1213                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1214                         adapter->alloc_rx_buf(adapter, cleaned_count);
1215                         cleaned_count = 0;
1216                 }
1217
1218                 /* use prefetched values */
1219                 rx_desc = next_rxd;
1220                 buffer_info = next_buffer;
1221
1222                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1223         }
1224         rx_ring->next_to_clean = i;
1225
1226         cleaned_count = e1000_desc_unused(rx_ring);
1227         if (cleaned_count)
1228                 adapter->alloc_rx_buf(adapter, cleaned_count);
1229
1230         adapter->total_rx_bytes += total_rx_bytes;
1231         adapter->total_rx_packets += total_rx_packets;
1232         netdev->stats.rx_bytes += total_rx_bytes;
1233         netdev->stats.rx_packets += total_rx_packets;
1234         return cleaned;
1235 }
1236
1237 /**
1238  * e1000_consume_page - helper function
1239  **/
1240 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
1241                                u16 length)
1242 {
1243         bi->page = NULL;
1244         skb->len += length;
1245         skb->data_len += length;
1246         skb->truesize += length;
1247 }
1248
1249 /**
1250  * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
1251  * @adapter: board private structure
1252  *
1253  * the return value indicates whether actual cleaning was done, there
1254  * is no guarantee that everything was cleaned
1255  **/
1256
1257 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
1258                                      int *work_done, int work_to_do)
1259 {
1260         struct net_device *netdev = adapter->netdev;
1261         struct pci_dev *pdev = adapter->pdev;
1262         struct e1000_ring *rx_ring = adapter->rx_ring;
1263         struct e1000_rx_desc *rx_desc, *next_rxd;
1264         struct e1000_buffer *buffer_info, *next_buffer;
1265         u32 length;
1266         unsigned int i;
1267         int cleaned_count = 0;
1268         bool cleaned = false;
1269         unsigned int total_rx_bytes=0, total_rx_packets=0;
1270
1271         i = rx_ring->next_to_clean;
1272         rx_desc = E1000_RX_DESC(*rx_ring, i);
1273         buffer_info = &rx_ring->buffer_info[i];
1274
1275         while (rx_desc->status & E1000_RXD_STAT_DD) {
1276                 struct sk_buff *skb;
1277                 u8 status;
1278
1279                 if (*work_done >= work_to_do)
1280                         break;
1281                 (*work_done)++;
1282
1283                 status = rx_desc->status;
1284                 skb = buffer_info->skb;
1285                 buffer_info->skb = NULL;
1286
1287                 ++i;
1288                 if (i == rx_ring->count)
1289                         i = 0;
1290                 next_rxd = E1000_RX_DESC(*rx_ring, i);
1291                 prefetch(next_rxd);
1292
1293                 next_buffer = &rx_ring->buffer_info[i];
1294
1295                 cleaned = true;
1296                 cleaned_count++;
1297                 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
1298                                DMA_FROM_DEVICE);
1299                 buffer_info->dma = 0;
1300
1301                 length = le16_to_cpu(rx_desc->length);
1302
1303                 /* errors is only valid for DD + EOP descriptors */
1304                 if (unlikely((status & E1000_RXD_STAT_EOP) &&
1305                     (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
1306                                 /* recycle both page and skb */
1307                                 buffer_info->skb = skb;
1308                                 /* an error means any chain goes out the window
1309                                  * too */
1310                                 if (rx_ring->rx_skb_top)
1311                                         dev_kfree_skb(rx_ring->rx_skb_top);
1312                                 rx_ring->rx_skb_top = NULL;
1313                                 goto next_desc;
1314                 }
1315
1316 #define rxtop rx_ring->rx_skb_top
1317                 if (!(status & E1000_RXD_STAT_EOP)) {
1318                         /* this descriptor is only the beginning (or middle) */
1319                         if (!rxtop) {
1320                                 /* this is the beginning of a chain */
1321                                 rxtop = skb;
1322                                 skb_fill_page_desc(rxtop, 0, buffer_info->page,
1323                                                    0, length);
1324                         } else {
1325                                 /* this is the middle of a chain */
1326                                 skb_fill_page_desc(rxtop,
1327                                     skb_shinfo(rxtop)->nr_frags,
1328                                     buffer_info->page, 0, length);
1329                                 /* re-use the skb, only consumed the page */
1330                                 buffer_info->skb = skb;
1331                         }
1332                         e1000_consume_page(buffer_info, rxtop, length);
1333                         goto next_desc;
1334                 } else {
1335                         if (rxtop) {
1336                                 /* end of the chain */
1337                                 skb_fill_page_desc(rxtop,
1338                                     skb_shinfo(rxtop)->nr_frags,
1339                                     buffer_info->page, 0, length);
1340                                 /* re-use the current skb, we only consumed the
1341                                  * page */
1342                                 buffer_info->skb = skb;
1343                                 skb = rxtop;
1344                                 rxtop = NULL;
1345                                 e1000_consume_page(buffer_info, skb, length);
1346                         } else {
1347                                 /* no chain, got EOP, this buf is the packet
1348                                  * copybreak to save the put_page/alloc_page */
1349                                 if (length <= copybreak &&
1350                                     skb_tailroom(skb) >= length) {
1351                                         u8 *vaddr;
1352                                         vaddr = kmap_atomic(buffer_info->page,
1353                                                            KM_SKB_DATA_SOFTIRQ);
1354                                         memcpy(skb_tail_pointer(skb), vaddr,
1355                                                length);
1356                                         kunmap_atomic(vaddr,
1357                                                       KM_SKB_DATA_SOFTIRQ);
1358                                         /* re-use the page, so don't erase
1359                                          * buffer_info->page */
1360                                         skb_put(skb, length);
1361                                 } else {
1362                                         skb_fill_page_desc(skb, 0,
1363                                                            buffer_info->page, 0,
1364                                                            length);
1365                                         e1000_consume_page(buffer_info, skb,
1366                                                            length);
1367                                 }
1368                         }
1369                 }
1370
1371                 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1372                 e1000_rx_checksum(adapter,
1373                                   (u32)(status) |
1374                                   ((u32)(rx_desc->errors) << 24),
1375                                   le16_to_cpu(rx_desc->csum), skb);
1376
1377                 /* probably a little skewed due to removing CRC */
1378                 total_rx_bytes += skb->len;
1379                 total_rx_packets++;
1380
1381                 /* eth type trans needs skb->data to point to something */
1382                 if (!pskb_may_pull(skb, ETH_HLEN)) {
1383                         e_err("pskb_may_pull failed.\n");
1384                         dev_kfree_skb(skb);
1385                         goto next_desc;
1386                 }
1387
1388                 e1000_receive_skb(adapter, netdev, skb, status,
1389                                   rx_desc->special);
1390
1391 next_desc:
1392                 rx_desc->status = 0;
1393
1394                 /* return some buffers to hardware, one at a time is too slow */
1395                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1396                         adapter->alloc_rx_buf(adapter, cleaned_count);
1397                         cleaned_count = 0;
1398                 }
1399
1400                 /* use prefetched values */
1401                 rx_desc = next_rxd;
1402                 buffer_info = next_buffer;
1403         }
1404         rx_ring->next_to_clean = i;
1405
1406         cleaned_count = e1000_desc_unused(rx_ring);
1407         if (cleaned_count)
1408                 adapter->alloc_rx_buf(adapter, cleaned_count);
1409
1410         adapter->total_rx_bytes += total_rx_bytes;
1411         adapter->total_rx_packets += total_rx_packets;
1412         netdev->stats.rx_bytes += total_rx_bytes;
1413         netdev->stats.rx_packets += total_rx_packets;
1414         return cleaned;
1415 }
1416
1417 /**
1418  * e1000_clean_rx_ring - Free Rx Buffers per Queue
1419  * @adapter: board private structure
1420  **/
1421 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1422 {
1423         struct e1000_ring *rx_ring = adapter->rx_ring;
1424         struct e1000_buffer *buffer_info;
1425         struct e1000_ps_page *ps_page;
1426         struct pci_dev *pdev = adapter->pdev;
1427         unsigned int i, j;
1428
1429         /* Free all the Rx ring sk_buffs */
1430         for (i = 0; i < rx_ring->count; i++) {
1431                 buffer_info = &rx_ring->buffer_info[i];
1432                 if (buffer_info->dma) {
1433                         if (adapter->clean_rx == e1000_clean_rx_irq)
1434                                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1435                                                  adapter->rx_buffer_len,
1436                                                  DMA_FROM_DEVICE);
1437                         else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1438                                 dma_unmap_page(&pdev->dev, buffer_info->dma,
1439                                                PAGE_SIZE,
1440                                                DMA_FROM_DEVICE);
1441                         else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1442                                 dma_unmap_single(&pdev->dev, buffer_info->dma,
1443                                                  adapter->rx_ps_bsize0,
1444                                                  DMA_FROM_DEVICE);
1445                         buffer_info->dma = 0;
1446                 }
1447
1448                 if (buffer_info->page) {
1449                         put_page(buffer_info->page);
1450                         buffer_info->page = NULL;
1451                 }
1452
1453                 if (buffer_info->skb) {
1454                         dev_kfree_skb(buffer_info->skb);
1455                         buffer_info->skb = NULL;
1456                 }
1457
1458                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1459                         ps_page = &buffer_info->ps_pages[j];
1460                         if (!ps_page->page)
1461                                 break;
1462                         dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1463                                        DMA_FROM_DEVICE);
1464                         ps_page->dma = 0;
1465                         put_page(ps_page->page);
1466                         ps_page->page = NULL;
1467                 }
1468         }
1469
1470         /* there also may be some cached data from a chained receive */
1471         if (rx_ring->rx_skb_top) {
1472                 dev_kfree_skb(rx_ring->rx_skb_top);
1473                 rx_ring->rx_skb_top = NULL;
1474         }
1475
1476         /* Zero out the descriptor ring */
1477         memset(rx_ring->desc, 0, rx_ring->size);
1478
1479         rx_ring->next_to_clean = 0;
1480         rx_ring->next_to_use = 0;
1481         adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1482
1483         writel(0, adapter->hw.hw_addr + rx_ring->head);
1484         writel(0, adapter->hw.hw_addr + rx_ring->tail);
1485 }
1486
1487 static void e1000e_downshift_workaround(struct work_struct *work)
1488 {
1489         struct e1000_adapter *adapter = container_of(work,
1490                                         struct e1000_adapter, downshift_task);
1491
1492         e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1493 }
1494
1495 /**
1496  * e1000_intr_msi - Interrupt Handler
1497  * @irq: interrupt number
1498  * @data: pointer to a network interface device structure
1499  **/
1500 static irqreturn_t e1000_intr_msi(int irq, void *data)
1501 {
1502         struct net_device *netdev = data;
1503         struct e1000_adapter *adapter = netdev_priv(netdev);
1504         struct e1000_hw *hw = &adapter->hw;
1505         u32 icr = er32(ICR);
1506
1507         /*
1508          * read ICR disables interrupts using IAM
1509          */
1510
1511         if (icr & E1000_ICR_LSC) {
1512                 hw->mac.get_link_status = 1;
1513                 /*
1514                  * ICH8 workaround-- Call gig speed drop workaround on cable
1515                  * disconnect (LSC) before accessing any PHY registers
1516                  */
1517                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1518                     (!(er32(STATUS) & E1000_STATUS_LU)))
1519                         schedule_work(&adapter->downshift_task);
1520
1521                 /*
1522                  * 80003ES2LAN workaround-- For packet buffer work-around on
1523                  * link down event; disable receives here in the ISR and reset
1524                  * adapter in watchdog
1525                  */
1526                 if (netif_carrier_ok(netdev) &&
1527                     adapter->flags & FLAG_RX_NEEDS_RESTART) {
1528                         /* disable receives */
1529                         u32 rctl = er32(RCTL);
1530                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1531                         adapter->flags |= FLAG_RX_RESTART_NOW;
1532                 }
1533                 /* guard against interrupt when we're going down */
1534                 if (!test_bit(__E1000_DOWN, &adapter->state))
1535                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1536         }
1537
1538         if (napi_schedule_prep(&adapter->napi)) {
1539                 adapter->total_tx_bytes = 0;
1540                 adapter->total_tx_packets = 0;
1541                 adapter->total_rx_bytes = 0;
1542                 adapter->total_rx_packets = 0;
1543                 __napi_schedule(&adapter->napi);
1544         }
1545
1546         return IRQ_HANDLED;
1547 }
1548
1549 /**
1550  * e1000_intr - Interrupt Handler
1551  * @irq: interrupt number
1552  * @data: pointer to a network interface device structure
1553  **/
1554 static irqreturn_t e1000_intr(int irq, void *data)
1555 {
1556         struct net_device *netdev = data;
1557         struct e1000_adapter *adapter = netdev_priv(netdev);
1558         struct e1000_hw *hw = &adapter->hw;
1559         u32 rctl, icr = er32(ICR);
1560
1561         if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1562                 return IRQ_NONE;  /* Not our interrupt */
1563
1564         /*
1565          * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1566          * not set, then the adapter didn't send an interrupt
1567          */
1568         if (!(icr & E1000_ICR_INT_ASSERTED))
1569                 return IRQ_NONE;
1570
1571         /*
1572          * Interrupt Auto-Mask...upon reading ICR,
1573          * interrupts are masked.  No need for the
1574          * IMC write
1575          */
1576
1577         if (icr & E1000_ICR_LSC) {
1578                 hw->mac.get_link_status = 1;
1579                 /*
1580                  * ICH8 workaround-- Call gig speed drop workaround on cable
1581                  * disconnect (LSC) before accessing any PHY registers
1582                  */
1583                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1584                     (!(er32(STATUS) & E1000_STATUS_LU)))
1585                         schedule_work(&adapter->downshift_task);
1586
1587                 /*
1588                  * 80003ES2LAN workaround--
1589                  * For packet buffer work-around on link down event;
1590                  * disable receives here in the ISR and
1591                  * reset adapter in watchdog
1592                  */
1593                 if (netif_carrier_ok(netdev) &&
1594                     (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1595                         /* disable receives */
1596                         rctl = er32(RCTL);
1597                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1598                         adapter->flags |= FLAG_RX_RESTART_NOW;
1599                 }
1600                 /* guard against interrupt when we're going down */
1601                 if (!test_bit(__E1000_DOWN, &adapter->state))
1602                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1603         }
1604
1605         if (napi_schedule_prep(&adapter->napi)) {
1606                 adapter->total_tx_bytes = 0;
1607                 adapter->total_tx_packets = 0;
1608                 adapter->total_rx_bytes = 0;
1609                 adapter->total_rx_packets = 0;
1610                 __napi_schedule(&adapter->napi);
1611         }
1612
1613         return IRQ_HANDLED;
1614 }
1615
1616 static irqreturn_t e1000_msix_other(int irq, void *data)
1617 {
1618         struct net_device *netdev = data;
1619         struct e1000_adapter *adapter = netdev_priv(netdev);
1620         struct e1000_hw *hw = &adapter->hw;
1621         u32 icr = er32(ICR);
1622
1623         if (!(icr & E1000_ICR_INT_ASSERTED)) {
1624                 if (!test_bit(__E1000_DOWN, &adapter->state))
1625                         ew32(IMS, E1000_IMS_OTHER);
1626                 return IRQ_NONE;
1627         }
1628
1629         if (icr & adapter->eiac_mask)
1630                 ew32(ICS, (icr & adapter->eiac_mask));
1631
1632         if (icr & E1000_ICR_OTHER) {
1633                 if (!(icr & E1000_ICR_LSC))
1634                         goto no_link_interrupt;
1635                 hw->mac.get_link_status = 1;
1636                 /* guard against interrupt when we're going down */
1637                 if (!test_bit(__E1000_DOWN, &adapter->state))
1638                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1639         }
1640
1641 no_link_interrupt:
1642         if (!test_bit(__E1000_DOWN, &adapter->state))
1643                 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
1644
1645         return IRQ_HANDLED;
1646 }
1647
1648
1649 static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
1650 {
1651         struct net_device *netdev = data;
1652         struct e1000_adapter *adapter = netdev_priv(netdev);
1653         struct e1000_hw *hw = &adapter->hw;
1654         struct e1000_ring *tx_ring = adapter->tx_ring;
1655
1656
1657         adapter->total_tx_bytes = 0;
1658         adapter->total_tx_packets = 0;
1659
1660         if (!e1000_clean_tx_irq(adapter))
1661                 /* Ring was not completely cleaned, so fire another interrupt */
1662                 ew32(ICS, tx_ring->ims_val);
1663
1664         return IRQ_HANDLED;
1665 }
1666
1667 static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
1668 {
1669         struct net_device *netdev = data;
1670         struct e1000_adapter *adapter = netdev_priv(netdev);
1671
1672         /* Write the ITR value calculated at the end of the
1673          * previous interrupt.
1674          */
1675         if (adapter->rx_ring->set_itr) {
1676                 writel(1000000000 / (adapter->rx_ring->itr_val * 256),
1677                        adapter->hw.hw_addr + adapter->rx_ring->itr_register);
1678                 adapter->rx_ring->set_itr = 0;
1679         }
1680
1681         if (napi_schedule_prep(&adapter->napi)) {
1682                 adapter->total_rx_bytes = 0;
1683                 adapter->total_rx_packets = 0;
1684                 __napi_schedule(&adapter->napi);
1685         }
1686         return IRQ_HANDLED;
1687 }
1688
1689 /**
1690  * e1000_configure_msix - Configure MSI-X hardware
1691  *
1692  * e1000_configure_msix sets up the hardware to properly
1693  * generate MSI-X interrupts.
1694  **/
1695 static void e1000_configure_msix(struct e1000_adapter *adapter)
1696 {
1697         struct e1000_hw *hw = &adapter->hw;
1698         struct e1000_ring *rx_ring = adapter->rx_ring;
1699         struct e1000_ring *tx_ring = adapter->tx_ring;
1700         int vector = 0;
1701         u32 ctrl_ext, ivar = 0;
1702
1703         adapter->eiac_mask = 0;
1704
1705         /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1706         if (hw->mac.type == e1000_82574) {
1707                 u32 rfctl = er32(RFCTL);
1708                 rfctl |= E1000_RFCTL_ACK_DIS;
1709                 ew32(RFCTL, rfctl);
1710         }
1711
1712 #define E1000_IVAR_INT_ALLOC_VALID      0x8
1713         /* Configure Rx vector */
1714         rx_ring->ims_val = E1000_IMS_RXQ0;
1715         adapter->eiac_mask |= rx_ring->ims_val;
1716         if (rx_ring->itr_val)
1717                 writel(1000000000 / (rx_ring->itr_val * 256),
1718                        hw->hw_addr + rx_ring->itr_register);
1719         else
1720                 writel(1, hw->hw_addr + rx_ring->itr_register);
1721         ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1722
1723         /* Configure Tx vector */
1724         tx_ring->ims_val = E1000_IMS_TXQ0;
1725         vector++;
1726         if (tx_ring->itr_val)
1727                 writel(1000000000 / (tx_ring->itr_val * 256),
1728                        hw->hw_addr + tx_ring->itr_register);
1729         else
1730                 writel(1, hw->hw_addr + tx_ring->itr_register);
1731         adapter->eiac_mask |= tx_ring->ims_val;
1732         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
1733
1734         /* set vector for Other Causes, e.g. link changes */
1735         vector++;
1736         ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
1737         if (rx_ring->itr_val)
1738                 writel(1000000000 / (rx_ring->itr_val * 256),
1739                        hw->hw_addr + E1000_EITR_82574(vector));
1740         else
1741                 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
1742
1743         /* Cause Tx interrupts on every write back */
1744         ivar |= (1 << 31);
1745
1746         ew32(IVAR, ivar);
1747
1748         /* enable MSI-X PBA support */
1749         ctrl_ext = er32(CTRL_EXT);
1750         ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
1751
1752         /* Auto-Mask Other interrupts upon ICR read */
1753 #define E1000_EIAC_MASK_82574   0x01F00000
1754         ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
1755         ctrl_ext |= E1000_CTRL_EXT_EIAME;
1756         ew32(CTRL_EXT, ctrl_ext);
1757         e1e_flush();
1758 }
1759
1760 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
1761 {
1762         if (adapter->msix_entries) {
1763                 pci_disable_msix(adapter->pdev);
1764                 kfree(adapter->msix_entries);
1765                 adapter->msix_entries = NULL;
1766         } else if (adapter->flags & FLAG_MSI_ENABLED) {
1767                 pci_disable_msi(adapter->pdev);
1768                 adapter->flags &= ~FLAG_MSI_ENABLED;
1769         }
1770 }
1771
1772 /**
1773  * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
1774  *
1775  * Attempt to configure interrupts using the best available
1776  * capabilities of the hardware and kernel.
1777  **/
1778 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
1779 {
1780         int err;
1781         int numvecs, i;
1782
1783
1784         switch (adapter->int_mode) {
1785         case E1000E_INT_MODE_MSIX:
1786                 if (adapter->flags & FLAG_HAS_MSIX) {
1787                         numvecs = 3; /* RxQ0, TxQ0 and other */
1788                         adapter->msix_entries = kcalloc(numvecs,
1789                                                       sizeof(struct msix_entry),
1790                                                       GFP_KERNEL);
1791                         if (adapter->msix_entries) {
1792                                 for (i = 0; i < numvecs; i++)
1793                                         adapter->msix_entries[i].entry = i;
1794
1795                                 err = pci_enable_msix(adapter->pdev,
1796                                                       adapter->msix_entries,
1797                                                       numvecs);
1798                                 if (err == 0)
1799                                         return;
1800                         }
1801                         /* MSI-X failed, so fall through and try MSI */
1802                         e_err("Failed to initialize MSI-X interrupts.  "
1803                               "Falling back to MSI interrupts.\n");
1804                         e1000e_reset_interrupt_capability(adapter);
1805                 }
1806                 adapter->int_mode = E1000E_INT_MODE_MSI;
1807                 /* Fall through */
1808         case E1000E_INT_MODE_MSI:
1809                 if (!pci_enable_msi(adapter->pdev)) {
1810                         adapter->flags |= FLAG_MSI_ENABLED;
1811                 } else {
1812                         adapter->int_mode = E1000E_INT_MODE_LEGACY;
1813                         e_err("Failed to initialize MSI interrupts.  Falling "
1814                               "back to legacy interrupts.\n");
1815                 }
1816                 /* Fall through */
1817         case E1000E_INT_MODE_LEGACY:
1818                 /* Don't do anything; this is the system default */
1819                 break;
1820         }
1821 }
1822
1823 /**
1824  * e1000_request_msix - Initialize MSI-X interrupts
1825  *
1826  * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
1827  * kernel.
1828  **/
1829 static int e1000_request_msix(struct e1000_adapter *adapter)
1830 {
1831         struct net_device *netdev = adapter->netdev;
1832         int err = 0, vector = 0;
1833
1834         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1835                 sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
1836         else
1837                 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
1838         err = request_irq(adapter->msix_entries[vector].vector,
1839                           e1000_intr_msix_rx, 0, adapter->rx_ring->name,
1840                           netdev);
1841         if (err)
1842                 goto out;
1843         adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
1844         adapter->rx_ring->itr_val = adapter->itr;
1845         vector++;
1846
1847         if (strlen(netdev->name) < (IFNAMSIZ - 5))
1848                 sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
1849         else
1850                 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
1851         err = request_irq(adapter->msix_entries[vector].vector,
1852                           e1000_intr_msix_tx, 0, adapter->tx_ring->name,
1853                           netdev);
1854         if (err)
1855                 goto out;
1856         adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
1857         adapter->tx_ring->itr_val = adapter->itr;
1858         vector++;
1859
1860         err = request_irq(adapter->msix_entries[vector].vector,
1861                           e1000_msix_other, 0, netdev->name, netdev);
1862         if (err)
1863                 goto out;
1864
1865         e1000_configure_msix(adapter);
1866         return 0;
1867 out:
1868         return err;
1869 }
1870
1871 /**
1872  * e1000_request_irq - initialize interrupts
1873  *
1874  * Attempts to configure interrupts using the best available
1875  * capabilities of the hardware and kernel.
1876  **/
1877 static int e1000_request_irq(struct e1000_adapter *adapter)
1878 {
1879         struct net_device *netdev = adapter->netdev;
1880         int err;
1881
1882         if (adapter->msix_entries) {
1883                 err = e1000_request_msix(adapter);
1884                 if (!err)
1885                         return err;
1886                 /* fall back to MSI */
1887                 e1000e_reset_interrupt_capability(adapter);
1888                 adapter->int_mode = E1000E_INT_MODE_MSI;
1889                 e1000e_set_interrupt_capability(adapter);
1890         }
1891         if (adapter->flags & FLAG_MSI_ENABLED) {
1892                 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
1893                                   netdev->name, netdev);
1894                 if (!err)
1895                         return err;
1896
1897                 /* fall back to legacy interrupt */
1898                 e1000e_reset_interrupt_capability(adapter);
1899                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1900         }
1901
1902         err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
1903                           netdev->name, netdev);
1904         if (err)
1905                 e_err("Unable to allocate interrupt, Error: %d\n", err);
1906
1907         return err;
1908 }
1909
1910 static void e1000_free_irq(struct e1000_adapter *adapter)
1911 {
1912         struct net_device *netdev = adapter->netdev;
1913
1914         if (adapter->msix_entries) {
1915                 int vector = 0;
1916
1917                 free_irq(adapter->msix_entries[vector].vector, netdev);
1918                 vector++;
1919
1920                 free_irq(adapter->msix_entries[vector].vector, netdev);
1921                 vector++;
1922
1923                 /* Other Causes interrupt vector */
1924                 free_irq(adapter->msix_entries[vector].vector, netdev);
1925                 return;
1926         }
1927
1928         free_irq(adapter->pdev->irq, netdev);
1929 }
1930
1931 /**
1932  * e1000_irq_disable - Mask off interrupt generation on the NIC
1933  **/
1934 static void e1000_irq_disable(struct e1000_adapter *adapter)
1935 {
1936         struct e1000_hw *hw = &adapter->hw;
1937
1938         ew32(IMC, ~0);
1939         if (adapter->msix_entries)
1940                 ew32(EIAC_82574, 0);
1941         e1e_flush();
1942         synchronize_irq(adapter->pdev->irq);
1943 }
1944
1945 /**
1946  * e1000_irq_enable - Enable default interrupt generation settings
1947  **/
1948 static void e1000_irq_enable(struct e1000_adapter *adapter)
1949 {
1950         struct e1000_hw *hw = &adapter->hw;
1951
1952         if (adapter->msix_entries) {
1953                 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
1954                 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
1955         } else {
1956                 ew32(IMS, IMS_ENABLE_MASK);
1957         }
1958         e1e_flush();
1959 }
1960
1961 /**
1962  * e1000_get_hw_control - get control of the h/w from f/w
1963  * @adapter: address of board private structure
1964  *
1965  * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1966  * For ASF and Pass Through versions of f/w this means that
1967  * the driver is loaded. For AMT version (only with 82573)
1968  * of the f/w this means that the network i/f is open.
1969  **/
1970 static void e1000_get_hw_control(struct e1000_adapter *adapter)
1971 {
1972         struct e1000_hw *hw = &adapter->hw;
1973         u32 ctrl_ext;
1974         u32 swsm;
1975
1976         /* Let firmware know the driver has taken over */
1977         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1978                 swsm = er32(SWSM);
1979                 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
1980         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1981                 ctrl_ext = er32(CTRL_EXT);
1982                 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1983         }
1984 }
1985
1986 /**
1987  * e1000_release_hw_control - release control of the h/w to f/w
1988  * @adapter: address of board private structure
1989  *
1990  * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1991  * For ASF and Pass Through versions of f/w this means that the
1992  * driver is no longer loaded. For AMT version (only with 82573) i
1993  * of the f/w this means that the network i/f is closed.
1994  *
1995  **/
1996 static void e1000_release_hw_control(struct e1000_adapter *adapter)
1997 {
1998         struct e1000_hw *hw = &adapter->hw;
1999         u32 ctrl_ext;
2000         u32 swsm;
2001
2002         /* Let firmware taken over control of h/w */
2003         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2004                 swsm = er32(SWSM);
2005                 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
2006         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2007                 ctrl_ext = er32(CTRL_EXT);
2008                 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
2009         }
2010 }
2011
2012 /**
2013  * @e1000_alloc_ring - allocate memory for a ring structure
2014  **/
2015 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
2016                                 struct e1000_ring *ring)
2017 {
2018         struct pci_dev *pdev = adapter->pdev;
2019
2020         ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
2021                                         GFP_KERNEL);
2022         if (!ring->desc)
2023                 return -ENOMEM;
2024
2025         return 0;
2026 }
2027
2028 /**
2029  * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
2030  * @adapter: board private structure
2031  *
2032  * Return 0 on success, negative on failure
2033  **/
2034 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
2035 {
2036         struct e1000_ring *tx_ring = adapter->tx_ring;
2037         int err = -ENOMEM, size;
2038
2039         size = sizeof(struct e1000_buffer) * tx_ring->count;
2040         tx_ring->buffer_info = vmalloc(size);
2041         if (!tx_ring->buffer_info)
2042                 goto err;
2043         memset(tx_ring->buffer_info, 0, size);
2044
2045         /* round up to nearest 4K */
2046         tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
2047         tx_ring->size = ALIGN(tx_ring->size, 4096);
2048
2049         err = e1000_alloc_ring_dma(adapter, tx_ring);
2050         if (err)
2051                 goto err;
2052
2053         tx_ring->next_to_use = 0;
2054         tx_ring->next_to_clean = 0;
2055
2056         return 0;
2057 err:
2058         vfree(tx_ring->buffer_info);
2059         e_err("Unable to allocate memory for the transmit descriptor ring\n");
2060         return err;
2061 }
2062
2063 /**
2064  * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
2065  * @adapter: board private structure
2066  *
2067  * Returns 0 on success, negative on failure
2068  **/
2069 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
2070 {
2071         struct e1000_ring *rx_ring = adapter->rx_ring;
2072         struct e1000_buffer *buffer_info;
2073         int i, size, desc_len, err = -ENOMEM;
2074
2075         size = sizeof(struct e1000_buffer) * rx_ring->count;
2076         rx_ring->buffer_info = vmalloc(size);
2077         if (!rx_ring->buffer_info)
2078                 goto err;
2079         memset(rx_ring->buffer_info, 0, size);
2080
2081         for (i = 0; i < rx_ring->count; i++) {
2082                 buffer_info = &rx_ring->buffer_info[i];
2083                 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
2084                                                 sizeof(struct e1000_ps_page),
2085                                                 GFP_KERNEL);
2086                 if (!buffer_info->ps_pages)
2087                         goto err_pages;
2088         }
2089
2090         desc_len = sizeof(union e1000_rx_desc_packet_split);
2091
2092         /* Round up to nearest 4K */
2093         rx_ring->size = rx_ring->count * desc_len;
2094         rx_ring->size = ALIGN(rx_ring->size, 4096);
2095
2096         err = e1000_alloc_ring_dma(adapter, rx_ring);
2097         if (err)
2098                 goto err_pages;
2099
2100         rx_ring->next_to_clean = 0;
2101         rx_ring->next_to_use = 0;
2102         rx_ring->rx_skb_top = NULL;
2103
2104         return 0;
2105
2106 err_pages:
2107         for (i = 0; i < rx_ring->count; i++) {
2108                 buffer_info = &rx_ring->buffer_info[i];
2109                 kfree(buffer_info->ps_pages);
2110         }
2111 err:
2112         vfree(rx_ring->buffer_info);
2113         e_err("Unable to allocate memory for the transmit descriptor ring\n");
2114         return err;
2115 }
2116
2117 /**
2118  * e1000_clean_tx_ring - Free Tx Buffers
2119  * @adapter: board private structure
2120  **/
2121 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
2122 {
2123         struct e1000_ring *tx_ring = adapter->tx_ring;
2124         struct e1000_buffer *buffer_info;
2125         unsigned long size;
2126         unsigned int i;
2127
2128         for (i = 0; i < tx_ring->count; i++) {
2129                 buffer_info = &tx_ring->buffer_info[i];
2130                 e1000_put_txbuf(adapter, buffer_info);
2131         }
2132
2133         size = sizeof(struct e1000_buffer) * tx_ring->count;
2134         memset(tx_ring->buffer_info, 0, size);
2135
2136         memset(tx_ring->desc, 0, tx_ring->size);
2137
2138         tx_ring->next_to_use = 0;
2139         tx_ring->next_to_clean = 0;
2140
2141         writel(0, adapter->hw.hw_addr + tx_ring->head);
2142         writel(0, adapter->hw.hw_addr + tx_ring->tail);
2143 }
2144
2145 /**
2146  * e1000e_free_tx_resources - Free Tx Resources per Queue
2147  * @adapter: board private structure
2148  *
2149  * Free all transmit software resources
2150  **/
2151 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
2152 {
2153         struct pci_dev *pdev = adapter->pdev;
2154         struct e1000_ring *tx_ring = adapter->tx_ring;
2155
2156         e1000_clean_tx_ring(adapter);
2157
2158         vfree(tx_ring->buffer_info);
2159         tx_ring->buffer_info = NULL;
2160
2161         dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
2162                           tx_ring->dma);
2163         tx_ring->desc = NULL;
2164 }
2165
2166 /**
2167  * e1000e_free_rx_resources - Free Rx Resources
2168  * @adapter: board private structure
2169  *
2170  * Free all receive software resources
2171  **/
2172
2173 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
2174 {
2175         struct pci_dev *pdev = adapter->pdev;
2176         struct e1000_ring *rx_ring = adapter->rx_ring;
2177         int i;
2178
2179         e1000_clean_rx_ring(adapter);
2180
2181         for (i = 0; i < rx_ring->count; i++) {
2182                 kfree(rx_ring->buffer_info[i].ps_pages);
2183         }
2184
2185         vfree(rx_ring->buffer_info);
2186         rx_ring->buffer_info = NULL;
2187
2188         dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2189                           rx_ring->dma);
2190         rx_ring->desc = NULL;
2191 }
2192
2193 /**
2194  * e1000_update_itr - update the dynamic ITR value based on statistics
2195  * @adapter: pointer to adapter
2196  * @itr_setting: current adapter->itr
2197  * @packets: the number of packets during this measurement interval
2198  * @bytes: the number of bytes during this measurement interval
2199  *
2200  *      Stores a new ITR value based on packets and byte
2201  *      counts during the last interrupt.  The advantage of per interrupt
2202  *      computation is faster updates and more accurate ITR for the current
2203  *      traffic pattern.  Constants in this function were computed
2204  *      based on theoretical maximum wire speed and thresholds were set based
2205  *      on testing data as well as attempting to minimize response time
2206  *      while increasing bulk throughput.  This functionality is controlled
2207  *      by the InterruptThrottleRate module parameter.
2208  **/
2209 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2210                                      u16 itr_setting, int packets,
2211                                      int bytes)
2212 {
2213         unsigned int retval = itr_setting;
2214
2215         if (packets == 0)
2216                 goto update_itr_done;
2217
2218         switch (itr_setting) {
2219         case lowest_latency:
2220                 /* handle TSO and jumbo frames */
2221                 if (bytes/packets > 8000)
2222                         retval = bulk_latency;
2223                 else if ((packets < 5) && (bytes > 512)) {
2224                         retval = low_latency;
2225                 }
2226                 break;
2227         case low_latency:  /* 50 usec aka 20000 ints/s */
2228                 if (bytes > 10000) {
2229                         /* this if handles the TSO accounting */
2230                         if (bytes/packets > 8000) {
2231                                 retval = bulk_latency;
2232                         } else if ((packets < 10) || ((bytes/packets) > 1200)) {
2233                                 retval = bulk_latency;
2234                         } else if ((packets > 35)) {
2235                                 retval = lowest_latency;
2236                         }
2237                 } else if (bytes/packets > 2000) {
2238                         retval = bulk_latency;
2239                 } else if (packets <= 2 && bytes < 512) {
2240                         retval = lowest_latency;
2241                 }
2242                 break;
2243         case bulk_latency: /* 250 usec aka 4000 ints/s */
2244                 if (bytes > 25000) {
2245                         if (packets > 35) {
2246                                 retval = low_latency;
2247                         }
2248                 } else if (bytes < 6000) {
2249                         retval = low_latency;
2250                 }
2251                 break;
2252         }
2253
2254 update_itr_done:
2255         return retval;
2256 }
2257
2258 static void e1000_set_itr(struct e1000_adapter *adapter)
2259 {
2260         struct e1000_hw *hw = &adapter->hw;
2261         u16 current_itr;
2262         u32 new_itr = adapter->itr;
2263
2264         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2265         if (adapter->link_speed != SPEED_1000) {
2266                 current_itr = 0;
2267                 new_itr = 4000;
2268                 goto set_itr_now;
2269         }
2270
2271         adapter->tx_itr = e1000_update_itr(adapter,
2272                                     adapter->tx_itr,
2273                                     adapter->total_tx_packets,
2274                                     adapter->total_tx_bytes);
2275         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2276         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2277                 adapter->tx_itr = low_latency;
2278
2279         adapter->rx_itr = e1000_update_itr(adapter,
2280                                     adapter->rx_itr,
2281                                     adapter->total_rx_packets,
2282                                     adapter->total_rx_bytes);
2283         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2284         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2285                 adapter->rx_itr = low_latency;
2286
2287         current_itr = max(adapter->rx_itr, adapter->tx_itr);
2288
2289         switch (current_itr) {
2290         /* counts and packets in update_itr are dependent on these numbers */
2291         case lowest_latency:
2292                 new_itr = 70000;
2293                 break;
2294         case low_latency:
2295                 new_itr = 20000; /* aka hwitr = ~200 */
2296                 break;
2297         case bulk_latency:
2298                 new_itr = 4000;
2299                 break;
2300         default:
2301                 break;
2302         }
2303
2304 set_itr_now:
2305         if (new_itr != adapter->itr) {
2306                 /*
2307                  * this attempts to bias the interrupt rate towards Bulk
2308                  * by adding intermediate steps when interrupt rate is
2309                  * increasing
2310                  */
2311                 new_itr = new_itr > adapter->itr ?
2312                              min(adapter->itr + (new_itr >> 2), new_itr) :
2313                              new_itr;
2314                 adapter->itr = new_itr;
2315                 adapter->rx_ring->itr_val = new_itr;
2316                 if (adapter->msix_entries)
2317                         adapter->rx_ring->set_itr = 1;
2318                 else
2319                         ew32(ITR, 1000000000 / (new_itr * 256));
2320         }
2321 }
2322
2323 /**
2324  * e1000_alloc_queues - Allocate memory for all rings
2325  * @adapter: board private structure to initialize
2326  **/
2327 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
2328 {
2329         adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2330         if (!adapter->tx_ring)
2331                 goto err;
2332
2333         adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2334         if (!adapter->rx_ring)
2335                 goto err;
2336
2337         return 0;
2338 err:
2339         e_err("Unable to allocate memory for queues\n");
2340         kfree(adapter->rx_ring);
2341         kfree(adapter->tx_ring);
2342         return -ENOMEM;
2343 }
2344
2345 /**
2346  * e1000_clean - NAPI Rx polling callback
2347  * @napi: struct associated with this polling callback
2348  * @budget: amount of packets driver is allowed to process this poll
2349  **/
2350 static int e1000_clean(struct napi_struct *napi, int budget)
2351 {
2352         struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
2353         struct e1000_hw *hw = &adapter->hw;
2354         struct net_device *poll_dev = adapter->netdev;
2355         int tx_cleaned = 1, work_done = 0;
2356
2357         adapter = netdev_priv(poll_dev);
2358
2359         if (adapter->msix_entries &&
2360             !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2361                 goto clean_rx;
2362
2363         tx_cleaned = e1000_clean_tx_irq(adapter);
2364
2365 clean_rx:
2366         adapter->clean_rx(adapter, &work_done, budget);
2367
2368         if (!tx_cleaned)
2369                 work_done = budget;
2370
2371         /* If budget not fully consumed, exit the polling mode */
2372         if (work_done < budget) {
2373                 if (adapter->itr_setting & 3)
2374                         e1000_set_itr(adapter);
2375                 napi_complete(napi);
2376                 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2377                         if (adapter->msix_entries)
2378                                 ew32(IMS, adapter->rx_ring->ims_val);
2379                         else
2380                                 e1000_irq_enable(adapter);
2381                 }
2382         }
2383
2384         return work_done;
2385 }
2386
2387 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
2388 {
2389         struct e1000_adapter *adapter = netdev_priv(netdev);
2390         struct e1000_hw *hw = &adapter->hw;
2391         u32 vfta, index;
2392
2393         /* don't update vlan cookie if already programmed */
2394         if ((adapter->hw.mng_cookie.status &
2395              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2396             (vid == adapter->mng_vlan_id))
2397                 return;
2398
2399         /* add VID to filter table */
2400         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2401                 index = (vid >> 5) & 0x7F;
2402                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2403                 vfta |= (1 << (vid & 0x1F));
2404                 hw->mac.ops.write_vfta(hw, index, vfta);
2405         }
2406 }
2407
2408 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
2409 {
2410         struct e1000_adapter *adapter = netdev_priv(netdev);
2411         struct e1000_hw *hw = &adapter->hw;
2412         u32 vfta, index;
2413
2414         if (!test_bit(__E1000_DOWN, &adapter->state))
2415                 e1000_irq_disable(adapter);
2416         vlan_group_set_device(adapter->vlgrp, vid, NULL);
2417
2418         if (!test_bit(__E1000_DOWN, &adapter->state))
2419                 e1000_irq_enable(adapter);
2420
2421         if ((adapter->hw.mng_cookie.status &
2422              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2423             (vid == adapter->mng_vlan_id)) {
2424                 /* release control to f/w */
2425                 e1000_release_hw_control(adapter);
2426                 return;
2427         }
2428
2429         /* remove VID from filter table */
2430         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2431                 index = (vid >> 5) & 0x7F;
2432                 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2433                 vfta &= ~(1 << (vid & 0x1F));
2434                 hw->mac.ops.write_vfta(hw, index, vfta);
2435         }
2436 }
2437
2438 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2439 {
2440         struct net_device *netdev = adapter->netdev;
2441         u16 vid = adapter->hw.mng_cookie.vlan_id;
2442         u16 old_vid = adapter->mng_vlan_id;
2443
2444         if (!adapter->vlgrp)
2445                 return;
2446
2447         if (!vlan_group_get_device(adapter->vlgrp, vid)) {
2448                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2449                 if (adapter->hw.mng_cookie.status &
2450                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2451                         e1000_vlan_rx_add_vid(netdev, vid);
2452                         adapter->mng_vlan_id = vid;
2453                 }
2454
2455                 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
2456                                 (vid != old_vid) &&
2457                     !vlan_group_get_device(adapter->vlgrp, old_vid))
2458                         e1000_vlan_rx_kill_vid(netdev, old_vid);
2459         } else {
2460                 adapter->mng_vlan_id = vid;
2461         }
2462 }
2463
2464
2465 static void e1000_vlan_rx_register(struct net_device *netdev,
2466                                    struct vlan_group *grp)
2467 {
2468         struct e1000_adapter *adapter = netdev_priv(netdev);
2469         struct e1000_hw *hw = &adapter->hw;
2470         u32 ctrl, rctl;
2471
2472         if (!test_bit(__E1000_DOWN, &adapter->state))
2473                 e1000_irq_disable(adapter);
2474         adapter->vlgrp = grp;
2475
2476         if (grp) {
2477                 /* enable VLAN tag insert/strip */
2478                 ctrl = er32(CTRL);
2479                 ctrl |= E1000_CTRL_VME;
2480                 ew32(CTRL, ctrl);
2481
2482                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2483                         /* enable VLAN receive filtering */
2484                         rctl = er32(RCTL);
2485                         rctl &= ~E1000_RCTL_CFIEN;
2486                         ew32(RCTL, rctl);
2487                         e1000_update_mng_vlan(adapter);
2488                 }
2489         } else {
2490                 /* disable VLAN tag insert/strip */
2491                 ctrl = er32(CTRL);
2492                 ctrl &= ~E1000_CTRL_VME;
2493                 ew32(CTRL, ctrl);
2494
2495                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2496                         if (adapter->mng_vlan_id !=
2497                             (u16)E1000_MNG_VLAN_NONE) {
2498                                 e1000_vlan_rx_kill_vid(netdev,
2499                                                        adapter->mng_vlan_id);
2500                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2501                         }
2502                 }
2503         }
2504
2505         if (!test_bit(__E1000_DOWN, &adapter->state))
2506                 e1000_irq_enable(adapter);
2507 }
2508
2509 static void e1000_restore_vlan(struct e1000_adapter *adapter)
2510 {
2511         u16 vid;
2512
2513         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
2514
2515         if (!adapter->vlgrp)
2516                 return;
2517
2518         for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
2519                 if (!vlan_group_get_device(adapter->vlgrp, vid))
2520                         continue;
2521                 e1000_vlan_rx_add_vid(adapter->netdev, vid);
2522         }
2523 }
2524
2525 static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
2526 {
2527         struct e1000_hw *hw = &adapter->hw;
2528         u32 manc, manc2h, mdef, i, j;
2529
2530         if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2531                 return;
2532
2533         manc = er32(MANC);
2534
2535         /*
2536          * enable receiving management packets to the host. this will probably
2537          * generate destination unreachable messages from the host OS, but
2538          * the packets will be handled on SMBUS
2539          */
2540         manc |= E1000_MANC_EN_MNG2HOST;
2541         manc2h = er32(MANC2H);
2542
2543         switch (hw->mac.type) {
2544         default:
2545                 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
2546                 break;
2547         case e1000_82574:
2548         case e1000_82583:
2549                 /*
2550                  * Check if IPMI pass-through decision filter already exists;
2551                  * if so, enable it.
2552                  */
2553                 for (i = 0, j = 0; i < 8; i++) {
2554                         mdef = er32(MDEF(i));
2555
2556                         /* Ignore filters with anything other than IPMI ports */
2557                         if (mdef & !(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2558                                 continue;
2559
2560                         /* Enable this decision filter in MANC2H */
2561                         if (mdef)
2562                                 manc2h |= (1 << i);
2563
2564                         j |= mdef;
2565                 }
2566
2567                 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2568                         break;
2569
2570                 /* Create new decision filter in an empty filter */
2571                 for (i = 0, j = 0; i < 8; i++)
2572                         if (er32(MDEF(i)) == 0) {
2573                                 ew32(MDEF(i), (E1000_MDEF_PORT_623 |
2574                                                E1000_MDEF_PORT_664));
2575                                 manc2h |= (1 << 1);
2576                                 j++;
2577                                 break;
2578                         }
2579
2580                 if (!j)
2581                         e_warn("Unable to create IPMI pass-through filter\n");
2582                 break;
2583         }
2584
2585         ew32(MANC2H, manc2h);
2586         ew32(MANC, manc);
2587 }
2588
2589 /**
2590  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
2591  * @adapter: board private structure
2592  *
2593  * Configure the Tx unit of the MAC after a reset.
2594  **/
2595 static void e1000_configure_tx(struct e1000_adapter *adapter)
2596 {
2597         struct e1000_hw *hw = &adapter->hw;
2598         struct e1000_ring *tx_ring = adapter->tx_ring;
2599         u64 tdba;
2600         u32 tdlen, tctl, tipg, tarc;
2601         u32 ipgr1, ipgr2;
2602
2603         /* Setup the HW Tx Head and Tail descriptor pointers */
2604         tdba = tx_ring->dma;
2605         tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2606         ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
2607         ew32(TDBAH, (tdba >> 32));
2608         ew32(TDLEN, tdlen);
2609         ew32(TDH, 0);
2610         ew32(TDT, 0);
2611         tx_ring->head = E1000_TDH;
2612         tx_ring->tail = E1000_TDT;
2613
2614         /* Set the default values for the Tx Inter Packet Gap timer */
2615         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;          /*  8  */
2616         ipgr1 = DEFAULT_82543_TIPG_IPGR1;               /*  8  */
2617         ipgr2 = DEFAULT_82543_TIPG_IPGR2;               /*  6  */
2618
2619         if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
2620                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /*  7  */
2621
2622         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
2623         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
2624         ew32(TIPG, tipg);
2625
2626         /* Set the Tx Interrupt Delay register */
2627         ew32(TIDV, adapter->tx_int_delay);
2628         /* Tx irq moderation */
2629         ew32(TADV, adapter->tx_abs_int_delay);
2630
2631         /* Program the Transmit Control Register */
2632         tctl = er32(TCTL);
2633         tctl &= ~E1000_TCTL_CT;
2634         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2635                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2636
2637         if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2638                 tarc = er32(TARC(0));
2639                 /*
2640                  * set the speed mode bit, we'll clear it if we're not at
2641                  * gigabit link later
2642                  */
2643 #define SPEED_MODE_BIT (1 << 21)
2644                 tarc |= SPEED_MODE_BIT;
2645                 ew32(TARC(0), tarc);
2646         }
2647
2648         /* errata: program both queues to unweighted RR */
2649         if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2650                 tarc = er32(TARC(0));
2651                 tarc |= 1;
2652                 ew32(TARC(0), tarc);
2653                 tarc = er32(TARC(1));
2654                 tarc |= 1;
2655                 ew32(TARC(1), tarc);
2656         }
2657
2658         /* Setup Transmit Descriptor Settings for eop descriptor */
2659         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2660
2661         /* only set IDE if we are delaying interrupts using the timers */
2662         if (adapter->tx_int_delay)
2663                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2664
2665         /* enable Report Status bit */
2666         adapter->txd_cmd |= E1000_TXD_CMD_RS;
2667
2668         ew32(TCTL, tctl);
2669
2670         e1000e_config_collision_dist(hw);
2671 }
2672
2673 /**
2674  * e1000_setup_rctl - configure the receive control registers
2675  * @adapter: Board private structure
2676  **/
2677 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
2678                            (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
2679 static void e1000_setup_rctl(struct e1000_adapter *adapter)
2680 {
2681         struct e1000_hw *hw = &adapter->hw;
2682         u32 rctl, rfctl;
2683         u32 psrctl = 0;
2684         u32 pages = 0;
2685
2686         /* Program MC offset vector base */
2687         rctl = er32(RCTL);
2688         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2689         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
2690                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
2691                 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2692
2693         /* Do not Store bad packets */
2694         rctl &= ~E1000_RCTL_SBP;
2695
2696         /* Enable Long Packet receive */
2697         if (adapter->netdev->mtu <= ETH_DATA_LEN)
2698                 rctl &= ~E1000_RCTL_LPE;
2699         else
2700                 rctl |= E1000_RCTL_LPE;
2701
2702         /* Some systems expect that the CRC is included in SMBUS traffic. The
2703          * hardware strips the CRC before sending to both SMBUS (BMC) and to
2704          * host memory when this is enabled
2705          */
2706         if (adapter->flags2 & FLAG2_CRC_STRIPPING)
2707                 rctl |= E1000_RCTL_SECRC;
2708
2709         /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
2710         if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
2711                 u16 phy_data;
2712
2713                 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
2714                 phy_data &= 0xfff8;
2715                 phy_data |= (1 << 2);
2716                 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
2717
2718                 e1e_rphy(hw, 22, &phy_data);
2719                 phy_data &= 0x0fff;
2720                 phy_data |= (1 << 14);
2721                 e1e_wphy(hw, 0x10, 0x2823);
2722                 e1e_wphy(hw, 0x11, 0x0003);
2723                 e1e_wphy(hw, 22, phy_data);
2724         }
2725
2726         /* Setup buffer sizes */
2727         rctl &= ~E1000_RCTL_SZ_4096;
2728         rctl |= E1000_RCTL_BSEX;
2729         switch (adapter->rx_buffer_len) {
2730         case 2048:
2731         default:
2732                 rctl |= E1000_RCTL_SZ_2048;
2733                 rctl &= ~E1000_RCTL_BSEX;
2734                 break;
2735         case 4096:
2736                 rctl |= E1000_RCTL_SZ_4096;
2737                 break;
2738         case 8192:
2739                 rctl |= E1000_RCTL_SZ_8192;
2740                 break;
2741         case 16384:
2742                 rctl |= E1000_RCTL_SZ_16384;
2743                 break;
2744         }
2745
2746         /*
2747          * 82571 and greater support packet-split where the protocol
2748          * header is placed in skb->data and the packet data is
2749          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2750          * In the case of a non-split, skb->data is linearly filled,
2751          * followed by the page buffers.  Therefore, skb->data is
2752          * sized to hold the largest protocol header.
2753          *
2754          * allocations using alloc_page take too long for regular MTU
2755          * so only enable packet split for jumbo frames
2756          *
2757          * Using pages when the page size is greater than 16k wastes
2758          * a lot of memory, since we allocate 3 pages at all times
2759          * per packet.
2760          */
2761         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2762         if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
2763             (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2764                 adapter->rx_ps_pages = pages;
2765         else
2766                 adapter->rx_ps_pages = 0;
2767
2768         if (adapter->rx_ps_pages) {
2769                 /* Configure extra packet-split registers */
2770                 rfctl = er32(RFCTL);
2771                 rfctl |= E1000_RFCTL_EXTEN;
2772                 /*
2773                  * disable packet split support for IPv6 extension headers,
2774                  * because some malformed IPv6 headers can hang the Rx
2775                  */
2776                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2777                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
2778
2779                 ew32(RFCTL, rfctl);
2780
2781                 /* Enable Packet split descriptors */
2782                 rctl |= E1000_RCTL_DTYP_PS;
2783
2784                 psrctl |= adapter->rx_ps_bsize0 >>
2785                         E1000_PSRCTL_BSIZE0_SHIFT;
2786
2787                 switch (adapter->rx_ps_pages) {
2788                 case 3:
2789                         psrctl |= PAGE_SIZE <<
2790                                 E1000_PSRCTL_BSIZE3_SHIFT;
2791                 case 2:
2792                         psrctl |= PAGE_SIZE <<
2793                                 E1000_PSRCTL_BSIZE2_SHIFT;
2794                 case 1:
2795                         psrctl |= PAGE_SIZE >>
2796                                 E1000_PSRCTL_BSIZE1_SHIFT;
2797                         break;
2798                 }
2799
2800                 ew32(PSRCTL, psrctl);
2801         }
2802
2803         ew32(RCTL, rctl);
2804         /* just started the receive unit, no need to restart */
2805         adapter->flags &= ~FLAG_RX_RESTART_NOW;
2806 }
2807
2808 /**
2809  * e1000_configure_rx - Configure Receive Unit after Reset
2810  * @adapter: board private structure
2811  *
2812  * Configure the Rx unit of the MAC after a reset.
2813  **/
2814 static void e1000_configure_rx(struct e1000_adapter *adapter)
2815 {
2816         struct e1000_hw *hw = &adapter->hw;
2817         struct e1000_ring *rx_ring = adapter->rx_ring;
2818         u64 rdba;
2819         u32 rdlen, rctl, rxcsum, ctrl_ext;
2820
2821         if (adapter->rx_ps_pages) {
2822                 /* this is a 32 byte descriptor */
2823                 rdlen = rx_ring->count *
2824                         sizeof(union e1000_rx_desc_packet_split);
2825                 adapter->clean_rx = e1000_clean_rx_irq_ps;
2826                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2827         } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
2828                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2829                 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
2830                 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
2831         } else {
2832                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2833                 adapter->clean_rx = e1000_clean_rx_irq;
2834                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2835         }
2836
2837         /* disable receives while setting up the descriptors */
2838         rctl = er32(RCTL);
2839         ew32(RCTL, rctl & ~E1000_RCTL_EN);
2840         e1e_flush();
2841         msleep(10);
2842
2843         /* set the Receive Delay Timer Register */
2844         ew32(RDTR, adapter->rx_int_delay);
2845
2846         /* irq moderation */
2847         ew32(RADV, adapter->rx_abs_int_delay);
2848         if (adapter->itr_setting != 0)
2849                 ew32(ITR, 1000000000 / (adapter->itr * 256));
2850
2851         ctrl_ext = er32(CTRL_EXT);
2852         /* Auto-Mask interrupts upon ICR access */
2853         ctrl_ext |= E1000_CTRL_EXT_IAME;
2854         ew32(IAM, 0xffffffff);
2855         ew32(CTRL_EXT, ctrl_ext);
2856         e1e_flush();
2857
2858         /*
2859          * Setup the HW Rx Head and Tail Descriptor Pointers and
2860          * the Base and Length of the Rx Descriptor Ring
2861          */
2862         rdba = rx_ring->dma;
2863         ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
2864         ew32(RDBAH, (rdba >> 32));
2865         ew32(RDLEN, rdlen);
2866         ew32(RDH, 0);
2867         ew32(RDT, 0);
2868         rx_ring->head = E1000_RDH;
2869         rx_ring->tail = E1000_RDT;
2870
2871         /* Enable Receive Checksum Offload for TCP and UDP */
2872         rxcsum = er32(RXCSUM);
2873         if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
2874                 rxcsum |= E1000_RXCSUM_TUOFL;
2875
2876                 /*
2877                  * IPv4 payload checksum for UDP fragments must be
2878                  * used in conjunction with packet-split.
2879                  */
2880                 if (adapter->rx_ps_pages)
2881                         rxcsum |= E1000_RXCSUM_IPPCSE;
2882         } else {
2883                 rxcsum &= ~E1000_RXCSUM_TUOFL;
2884                 /* no need to clear IPPCSE as it defaults to 0 */
2885         }
2886         ew32(RXCSUM, rxcsum);
2887
2888         /*
2889          * Enable early receives on supported devices, only takes effect when
2890          * packet size is equal or larger than the specified value (in 8 byte
2891          * units), e.g. using jumbo frames when setting to E1000_ERT_2048
2892          */
2893         if (adapter->flags & FLAG_HAS_ERT) {
2894                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2895                         u32 rxdctl = er32(RXDCTL(0));
2896                         ew32(RXDCTL(0), rxdctl | 0x3);
2897                         ew32(ERT, E1000_ERT_2048 | (1 << 13));
2898                         /*
2899                          * With jumbo frames and early-receive enabled,
2900                          * excessive C-state transition latencies result in
2901                          * dropped transactions.
2902                          */
2903                         pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2904                                                   adapter->netdev->name, 55);
2905                 } else {
2906                         pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2907                                                   adapter->netdev->name,
2908                                                   PM_QOS_DEFAULT_VALUE);
2909                 }
2910         }
2911
2912         /* Enable Receives */
2913         ew32(RCTL, rctl);
2914 }
2915
2916 /**
2917  *  e1000_update_mc_addr_list - Update Multicast addresses
2918  *  @hw: pointer to the HW structure
2919  *  @mc_addr_list: array of multicast addresses to program
2920  *  @mc_addr_count: number of multicast addresses to program
2921  *
2922  *  Updates the Multicast Table Array.
2923  *  The caller must have a packed mc_addr_list of multicast addresses.
2924  **/
2925 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
2926                                       u32 mc_addr_count)
2927 {
2928         hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
2929 }
2930
2931 /**
2932  * e1000_set_multi - Multicast and Promiscuous mode set
2933  * @netdev: network interface device structure
2934  *
2935  * The set_multi entry point is called whenever the multicast address
2936  * list or the network interface flags are updated.  This routine is
2937  * responsible for configuring the hardware for proper multicast,
2938  * promiscuous mode, and all-multi behavior.
2939  **/
2940 static void e1000_set_multi(struct net_device *netdev)
2941 {
2942         struct e1000_adapter *adapter = netdev_priv(netdev);
2943         struct e1000_hw *hw = &adapter->hw;
2944         struct netdev_hw_addr *ha;
2945         u8  *mta_list;
2946         u32 rctl;
2947         int i;
2948
2949         /* Check for Promiscuous and All Multicast modes */
2950
2951         rctl = er32(RCTL);
2952
2953         if (netdev->flags & IFF_PROMISC) {
2954                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2955                 rctl &= ~E1000_RCTL_VFE;
2956         } else {
2957                 if (netdev->flags & IFF_ALLMULTI) {
2958                         rctl |= E1000_RCTL_MPE;
2959                         rctl &= ~E1000_RCTL_UPE;
2960                 } else {
2961                         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2962                 }
2963                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
2964                         rctl |= E1000_RCTL_VFE;
2965         }
2966
2967         ew32(RCTL, rctl);
2968
2969         if (!netdev_mc_empty(netdev)) {
2970                 mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
2971                 if (!mta_list)
2972                         return;
2973
2974                 /* prepare a packed array of only addresses. */
2975                 i = 0;
2976                 netdev_for_each_mc_addr(ha, netdev)
2977                         memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
2978
2979                 e1000_update_mc_addr_list(hw, mta_list, i);
2980                 kfree(mta_list);
2981         } else {
2982                 /*
2983                  * if we're called from probe, we might not have
2984                  * anything to do here, so clear out the list
2985                  */
2986                 e1000_update_mc_addr_list(hw, NULL, 0);
2987         }
2988 }
2989
2990 /**
2991  * e1000_configure - configure the hardware for Rx and Tx
2992  * @adapter: private board structure
2993  **/
2994 static void e1000_configure(struct e1000_adapter *adapter)
2995 {
2996         e1000_set_multi(adapter->netdev);
2997
2998         e1000_restore_vlan(adapter);
2999         e1000_init_manageability_pt(adapter);
3000
3001         e1000_configure_tx(adapter);
3002         e1000_setup_rctl(adapter);
3003         e1000_configure_rx(adapter);
3004         adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
3005 }
3006
3007 /**
3008  * e1000e_power_up_phy - restore link in case the phy was powered down
3009  * @adapter: address of board private structure
3010  *
3011  * The phy may be powered down to save power and turn off link when the
3012  * driver is unloaded and wake on lan is not enabled (among others)
3013  * *** this routine MUST be followed by a call to e1000e_reset ***
3014  **/
3015 void e1000e_power_up_phy(struct e1000_adapter *adapter)
3016 {
3017         if (adapter->hw.phy.ops.power_up)
3018                 adapter->hw.phy.ops.power_up(&adapter->hw);
3019
3020         adapter->hw.mac.ops.setup_link(&adapter->hw);
3021 }
3022
3023 /**
3024  * e1000_power_down_phy - Power down the PHY
3025  *
3026  * Power down the PHY so no link is implied when interface is down.
3027  * The PHY cannot be powered down if management or WoL is active.
3028  */
3029 static void e1000_power_down_phy(struct e1000_adapter *adapter)
3030 {
3031         /* WoL is enabled */
3032         if (adapter->wol)
3033                 return;
3034
3035         if (adapter->hw.phy.ops.power_down)
3036                 adapter->hw.phy.ops.power_down(&adapter->hw);
3037 }
3038
3039 /**
3040  * e1000e_reset - bring the hardware into a known good state
3041  *
3042  * This function boots the hardware and enables some settings that
3043  * require a configuration cycle of the hardware - those cannot be
3044  * set/changed during runtime. After reset the device needs to be
3045  * properly configured for Rx, Tx etc.
3046  */
3047 void e1000e_reset(struct e1000_adapter *adapter)
3048 {
3049         struct e1000_mac_info *mac = &adapter->hw.mac;
3050         struct e1000_fc_info *fc = &adapter->hw.fc;
3051         struct e1000_hw *hw = &adapter->hw;
3052         u32 tx_space, min_tx_space, min_rx_space;
3053         u32 pba = adapter->pba;
3054         u16 hwm;
3055
3056         /* reset Packet Buffer Allocation to default */
3057         ew32(PBA, pba);
3058
3059         if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
3060                 /*
3061                  * To maintain wire speed transmits, the Tx FIFO should be
3062                  * large enough to accommodate two full transmit packets,
3063                  * rounded up to the next 1KB and expressed in KB.  Likewise,
3064                  * the Rx FIFO should be large enough to accommodate at least
3065                  * one full receive packet and is similarly rounded up and
3066                  * expressed in KB.
3067                  */
3068                 pba = er32(PBA);
3069                 /* upper 16 bits has Tx packet buffer allocation size in KB */
3070                 tx_space = pba >> 16;
3071                 /* lower 16 bits has Rx packet buffer allocation size in KB */
3072                 pba &= 0xffff;
3073                 /*
3074                  * the Tx fifo also stores 16 bytes of information about the tx
3075                  * but don't include ethernet FCS because hardware appends it
3076                  */
3077                 min_tx_space = (adapter->max_frame_size +
3078                                 sizeof(struct e1000_tx_desc) -
3079                                 ETH_FCS_LEN) * 2;
3080                 min_tx_space = ALIGN(min_tx_space, 1024);
3081                 min_tx_space >>= 10;
3082                 /* software strips receive CRC, so leave room for it */
3083                 min_rx_space = adapter->max_frame_size;
3084                 min_rx_space = ALIGN(min_rx_space, 1024);
3085                 min_rx_space >>= 10;
3086
3087                 /*
3088                  * If current Tx allocation is less than the min Tx FIFO size,
3089                  * and the min Tx FIFO size is less than the current Rx FIFO
3090                  * allocation, take space away from current Rx allocation
3091                  */
3092                 if ((tx_space < min_tx_space) &&
3093                     ((min_tx_space - tx_space) < pba)) {
3094                         pba -= min_tx_space - tx_space;
3095
3096                         /*
3097                          * if short on Rx space, Rx wins and must trump tx
3098                          * adjustment or use Early Receive if available
3099                          */
3100                         if ((pba < min_rx_space) &&
3101                             (!(adapter->flags & FLAG_HAS_ERT)))
3102                                 /* ERT enabled in e1000_configure_rx */
3103                                 pba = min_rx_space;
3104                 }
3105
3106                 ew32(PBA, pba);
3107         }
3108
3109
3110         /*
3111          * flow control settings
3112          *
3113          * The high water mark must be low enough to fit one full frame
3114          * (or the size used for early receive) above it in the Rx FIFO.
3115          * Set it to the lower of:
3116          * - 90% of the Rx FIFO size, and
3117          * - the full Rx FIFO size minus the early receive size (for parts
3118          *   with ERT support assuming ERT set to E1000_ERT_2048), or
3119          * - the full Rx FIFO size minus one full frame
3120          */
3121         if (hw->mac.type == e1000_pchlan) {
3122                 /*
3123                  * Workaround PCH LOM adapter hangs with certain network
3124                  * loads.  If hangs persist, try disabling Tx flow control.
3125                  */
3126                 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3127                         fc->high_water = 0x3500;
3128                         fc->low_water  = 0x1500;
3129                 } else {
3130                         fc->high_water = 0x5000;
3131                         fc->low_water  = 0x3000;
3132                 }
3133                 fc->refresh_time = 0x1000;
3134         } else {
3135                 if ((adapter->flags & FLAG_HAS_ERT) &&
3136                     (adapter->netdev->mtu > ETH_DATA_LEN))
3137                         hwm = min(((pba << 10) * 9 / 10),
3138                                   ((pba << 10) - (E1000_ERT_2048 << 3)));
3139                 else
3140                         hwm = min(((pba << 10) * 9 / 10),
3141                                   ((pba << 10) - adapter->max_frame_size));
3142
3143                 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
3144                 fc->low_water = fc->high_water - 8;
3145         }
3146
3147         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
3148                 fc->pause_time = 0xFFFF;
3149         else
3150                 fc->pause_time = E1000_FC_PAUSE_TIME;
3151         fc->send_xon = 1;
3152         fc->current_mode = fc->requested_mode;
3153
3154         /* Allow time for pending master requests to run */
3155         mac->ops.reset_hw(hw);
3156
3157         /*
3158          * For parts with AMT enabled, let the firmware know
3159          * that the network interface is in control
3160          */
3161         if (adapter->flags & FLAG_HAS_AMT)
3162                 e1000_get_hw_control(adapter);
3163
3164         ew32(WUC, 0);
3165         if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
3166                 e1e_wphy(&adapter->hw, BM_WUC, 0);
3167
3168         if (mac->ops.init_hw(hw))
3169                 e_err("Hardware Error\n");
3170
3171         e1000_update_mng_vlan(adapter);
3172
3173         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
3174         ew32(VET, ETH_P_8021Q);
3175
3176         e1000e_reset_adaptive(hw);
3177         e1000_get_phy_info(hw);
3178
3179         if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
3180             !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
3181                 u16 phy_data = 0;
3182                 /*
3183                  * speed up time to link by disabling smart power down, ignore
3184                  * the return value of this function because there is nothing
3185                  * different we would do if it failed
3186                  */
3187                 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
3188                 phy_data &= ~IGP02E1000_PM_SPD;
3189                 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
3190         }
3191 }
3192
3193 int e1000e_up(struct e1000_adapter *adapter)
3194 {
3195         struct e1000_hw *hw = &adapter->hw;
3196
3197         /* DMA latency requirement to workaround early-receive/jumbo issue */
3198         if (adapter->flags & FLAG_HAS_ERT)
3199                 pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
3200                                        adapter->netdev->name,
3201                                        PM_QOS_DEFAULT_VALUE);
3202
3203         /* hardware has been reset, we need to reload some things */
3204         e1000_configure(adapter);
3205
3206         clear_bit(__E1000_DOWN, &adapter->state);
3207
3208         napi_enable(&adapter->napi);
3209         if (adapter->msix_entries)
3210                 e1000_configure_msix(adapter);
3211         e1000_irq_enable(adapter);
3212
3213         netif_wake_queue(adapter->netdev);
3214
3215         /* fire a link change interrupt to start the watchdog */
3216         if (adapter->msix_entries)
3217                 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3218         else
3219                 ew32(ICS, E1000_ICS_LSC);
3220
3221         return 0;
3222 }
3223
3224 void e1000e_down(struct e1000_adapter *adapter)
3225 {
3226         struct net_device *netdev = adapter->netdev;
3227         struct e1000_hw *hw = &adapter->hw;
3228         u32 tctl, rctl;
3229
3230         /*
3231          * signal that we're down so the interrupt handler does not
3232          * reschedule our watchdog timer
3233          */
3234         set_bit(__E1000_DOWN, &adapter->state);
3235
3236         /* disable receives in the hardware */
3237         rctl = er32(RCTL);
3238         ew32(RCTL, rctl & ~E1000_RCTL_EN);
3239         /* flush and sleep below */
3240
3241         netif_stop_queue(netdev);
3242
3243         /* disable transmits in the hardware */
3244         tctl = er32(TCTL);
3245         tctl &= ~E1000_TCTL_EN;
3246         ew32(TCTL, tctl);
3247         /* flush both disables and wait for them to finish */
3248         e1e_flush();
3249         msleep(10);
3250
3251         napi_disable(&adapter->napi);
3252         e1000_irq_disable(adapter);
3253
3254         del_timer_sync(&adapter->watchdog_timer);
3255         del_timer_sync(&adapter->phy_info_timer);
3256
3257         netif_carrier_off(netdev);
3258         adapter->link_speed = 0;
3259         adapter->link_duplex = 0;
3260
3261         if (!pci_channel_offline(adapter->pdev))
3262                 e1000e_reset(adapter);
3263         e1000_clean_tx_ring(adapter);
3264         e1000_clean_rx_ring(adapter);
3265
3266         if (adapter->flags & FLAG_HAS_ERT)
3267                 pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
3268                                           adapter->netdev->name);
3269
3270         /*
3271          * TODO: for power management, we could drop the link and
3272          * pci_disable_device here.
3273          */
3274 }
3275
3276 void e1000e_reinit_locked(struct e1000_adapter *adapter)
3277 {
3278         might_sleep();
3279         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
3280                 msleep(1);
3281         e1000e_down(adapter);
3282         e1000e_up(adapter);
3283         clear_bit(__E1000_RESETTING, &adapter->state);
3284 }
3285
3286 /**
3287  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
3288  * @adapter: board private structure to initialize
3289  *
3290  * e1000_sw_init initializes the Adapter private data structure.
3291  * Fields are initialized based on PCI device information and
3292  * OS network device settings (MTU size).
3293  **/
3294 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
3295 {
3296         struct net_device *netdev = adapter->netdev;
3297
3298         adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
3299         adapter->rx_ps_bsize0 = 128;
3300         adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
3301         adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
3302
3303         e1000e_set_interrupt_capability(adapter);
3304
3305         if (e1000_alloc_queues(adapter))
3306                 return -ENOMEM;
3307
3308         /* Explicitly disable IRQ since the NIC can be in any state. */
3309         e1000_irq_disable(adapter);
3310
3311         set_bit(__E1000_DOWN, &adapter->state);
3312         return 0;
3313 }
3314
3315 /**
3316  * e1000_intr_msi_test - Interrupt Handler
3317  * @irq: interrupt number
3318  * @data: pointer to a network interface device structure
3319  **/
3320 static irqreturn_t e1000_intr_msi_test(int irq, void *data)
3321 {
3322         struct net_device *netdev = data;
3323         struct e1000_adapter *adapter = netdev_priv(netdev);
3324         struct e1000_hw *hw = &adapter->hw;
3325         u32 icr = er32(ICR);
3326
3327         e_dbg("icr is %08X\n", icr);
3328         if (icr & E1000_ICR_RXSEQ) {
3329                 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
3330                 wmb();
3331         }
3332
3333         return IRQ_HANDLED;
3334 }
3335
3336 /**
3337  * e1000_test_msi_interrupt - Returns 0 for successful test
3338  * @adapter: board private struct
3339  *
3340  * code flow taken from tg3.c
3341  **/
3342 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
3343 {
3344         struct net_device *netdev = adapter->netdev;
3345         struct e1000_hw *hw = &adapter->hw;
3346         int err;
3347
3348         /* poll_enable hasn't been called yet, so don't need disable */
3349         /* clear any pending events */
3350         er32(ICR);
3351
3352         /* free the real vector and request a test handler */
3353         e1000_free_irq(adapter);
3354         e1000e_reset_interrupt_capability(adapter);
3355
3356         /* Assume that the test fails, if it succeeds then the test
3357          * MSI irq handler will unset this flag */
3358         adapter->flags |= FLAG_MSI_TEST_FAILED;
3359
3360         err = pci_enable_msi(adapter->pdev);
3361         if (err)
3362                 goto msi_test_failed;
3363
3364         err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
3365                           netdev->name, netdev);
3366         if (err) {
3367                 pci_disable_msi(adapter->pdev);
3368                 goto msi_test_failed;
3369         }
3370
3371         wmb();
3372
3373         e1000_irq_enable(adapter);
3374
3375         /* fire an unusual interrupt on the test handler */
3376         ew32(ICS, E1000_ICS_RXSEQ);
3377         e1e_flush();
3378         msleep(50);
3379
3380         e1000_irq_disable(adapter);
3381
3382         rmb();
3383
3384         if (adapter->flags & FLAG_MSI_TEST_FAILED) {
3385                 adapter->int_mode = E1000E_INT_MODE_LEGACY;
3386                 err = -EIO;
3387                 e_info("MSI interrupt test failed!\n");
3388         }
3389
3390         free_irq(adapter->pdev->irq, netdev);
3391         pci_disable_msi(adapter->pdev);
3392
3393         if (err == -EIO)
3394                 goto msi_test_failed;
3395
3396         /* okay so the test worked, restore settings */
3397         e_dbg("MSI interrupt test succeeded!\n");
3398 msi_test_failed:
3399         e1000e_set_interrupt_capability(adapter);
3400         e1000_request_irq(adapter);
3401         return err;
3402 }
3403
3404 /**
3405  * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
3406  * @adapter: board private struct
3407  *
3408  * code flow taken from tg3.c, called with e1000 interrupts disabled.
3409  **/
3410 static int e1000_test_msi(struct e1000_adapter *adapter)
3411 {
3412         int err;
3413         u16 pci_cmd;
3414
3415         if (!(adapter->flags & FLAG_MSI_ENABLED))
3416                 return 0;
3417
3418         /* disable SERR in case the MSI write causes a master abort */
3419         pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3420         pci_write_config_word(adapter->pdev, PCI_COMMAND,
3421                               pci_cmd & ~PCI_COMMAND_SERR);
3422
3423         err = e1000_test_msi_interrupt(adapter);
3424
3425         /* restore previous setting of command word */
3426         pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
3427
3428         /* success ! */
3429         if (!err)
3430                 return 0;
3431
3432         /* EIO means MSI test failed */
3433         if (err != -EIO)
3434                 return err;
3435
3436         /* back to INTx mode */
3437         e_warn("MSI interrupt test failed, using legacy interrupt.\n");
3438
3439         e1000_free_irq(adapter);
3440
3441         err = e1000_request_irq(adapter);
3442
3443         return err;
3444 }
3445
3446 /**
3447  * e1000_open - Called when a network interface is made active
3448  * @netdev: network interface device structure
3449  *
3450  * Returns 0 on success, negative value on failure
3451  *
3452  * The open entry point is called when a network interface is made
3453  * active by the system (IFF_UP).  At this point all resources needed
3454  * for transmit and receive operations are allocated, the interrupt
3455  * handler is registered with the OS, the watchdog timer is started,
3456  * and the stack is notified that the interface is ready.
3457  **/
3458 static int e1000_open(struct net_device *netdev)
3459 {
3460         struct e1000_adapter *adapter = netdev_priv(netdev);
3461         struct e1000_hw *hw = &adapter->hw;
3462         struct pci_dev *pdev = adapter->pdev;
3463         int err;
3464
3465         /* disallow open during test */
3466         if (test_bit(__E1000_TESTING, &adapter->state))
3467                 return -EBUSY;
3468
3469         pm_runtime_get_sync(&pdev->dev);
3470
3471         netif_carrier_off(netdev);
3472
3473         /* allocate transmit descriptors */
3474         err = e1000e_setup_tx_resources(adapter);
3475         if (err)
3476                 goto err_setup_tx;
3477
3478         /* allocate receive descriptors */
3479         err = e1000e_setup_rx_resources(adapter);
3480         if (err)
3481                 goto err_setup_rx;
3482
3483         /*
3484          * If AMT is enabled, let the firmware know that the network
3485          * interface is now open and reset the part to a known state.
3486          */
3487         if (adapter->flags & FLAG_HAS_AMT) {
3488                 e1000_get_hw_control(adapter);
3489                 e1000e_reset(adapter);
3490         }
3491
3492         e1000e_power_up_phy(adapter);
3493
3494         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
3495         if ((adapter->hw.mng_cookie.status &
3496              E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
3497                 e1000_update_mng_vlan(adapter);
3498
3499         /*
3500          * before we allocate an interrupt, we must be ready to handle it.
3501          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3502          * as soon as we call pci_request_irq, so we have to setup our
3503          * clean_rx handler before we do so.
3504          */
3505         e1000_configure(adapter);
3506
3507         err = e1000_request_irq(adapter);
3508         if (err)
3509                 goto err_req_irq;
3510
3511         /*
3512          * Work around PCIe errata with MSI interrupts causing some chipsets to
3513          * ignore e1000e MSI messages, which means we need to test our MSI
3514          * interrupt now
3515          */
3516         if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
3517                 err = e1000_test_msi(adapter);
3518                 if (err) {
3519                         e_err("Interrupt allocation failed\n");
3520                         goto err_req_irq;
3521                 }
3522         }
3523
3524         /* From here on the code is the same as e1000e_up() */
3525         clear_bit(__E1000_DOWN, &adapter->state);
3526
3527         napi_enable(&adapter->napi);
3528
3529         e1000_irq_enable(adapter);
3530
3531         netif_start_queue(netdev);
3532
3533         adapter->idle_check = true;
3534         pm_runtime_put(&pdev->dev);
3535
3536         /* fire a link status change interrupt to start the watchdog */
3537         if (adapter->msix_entries)
3538                 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3539         else
3540                 ew32(ICS, E1000_ICS_LSC);
3541
3542         return 0;
3543
3544 err_req_irq:
3545         e1000_release_hw_control(adapter);
3546         e1000_power_down_phy(adapter);
3547         e1000e_free_rx_resources(adapter);
3548 err_setup_rx:
3549         e1000e_free_tx_resources(adapter);
3550 err_setup_tx:
3551         e1000e_reset(adapter);
3552         pm_runtime_put_sync(&pdev->dev);
3553
3554         return err;
3555 }
3556
3557 /**
3558  * e1000_close - Disables a network interface
3559  * @netdev: network interface device structure
3560  *
3561  * Returns 0, this is not allowed to fail
3562  *
3563  * The close entry point is called when an interface is de-activated
3564  * by the OS.  The hardware is still under the drivers control, but
3565  * needs to be disabled.  A global MAC reset is issued to stop the
3566  * hardware, and all transmit and receive resources are freed.
3567  **/
3568 static int e1000_close(struct net_device *netdev)
3569 {
3570         struct e1000_adapter *adapter = netdev_priv(netdev);
3571         struct pci_dev *pdev = adapter->pdev;
3572
3573         WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3574
3575         pm_runtime_get_sync(&pdev->dev);
3576
3577         if (!test_bit(__E1000_DOWN, &adapter->state)) {
3578                 e1000e_down(adapter);
3579                 e1000_free_irq(adapter);
3580         }
3581         e1000_power_down_phy(adapter);
3582
3583         e1000e_free_tx_resources(adapter);
3584         e1000e_free_rx_resources(adapter);
3585
3586         /*
3587          * kill manageability vlan ID if supported, but not if a vlan with
3588          * the same ID is registered on the host OS (let 8021q kill it)
3589          */
3590         if ((adapter->hw.mng_cookie.status &
3591                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
3592              !(adapter->vlgrp &&
3593                vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
3594                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
3595
3596         /*
3597          * If AMT is enabled, let the firmware know that the network
3598          * interface is now closed
3599          */
3600         if (adapter->flags & FLAG_HAS_AMT)
3601                 e1000_release_hw_control(adapter);
3602
3603         pm_runtime_put_sync(&pdev->dev);
3604
3605         return 0;
3606 }
3607 /**
3608  * e1000_set_mac - Change the Ethernet Address of the NIC
3609  * @netdev: network interface device structure
3610  * @p: pointer to an address structure
3611  *
3612  * Returns 0 on success, negative on failure
3613  **/
3614 static int e1000_set_mac(struct net_device *netdev, void *p)
3615 {
3616         struct e1000_adapter *adapter = netdev_priv(netdev);
3617         struct sockaddr *addr = p;
3618
3619         if (!is_valid_ether_addr(addr->sa_data))
3620                 return -EADDRNOTAVAIL;
3621
3622         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3623         memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
3624
3625         e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
3626
3627         if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
3628                 /* activate the work around */
3629                 e1000e_set_laa_state_82571(&adapter->hw, 1);
3630
3631                 /*
3632                  * Hold a copy of the LAA in RAR[14] This is done so that
3633                  * between the time RAR[0] gets clobbered  and the time it
3634                  * gets fixed (in e1000_watchdog), the actual LAA is in one
3635                  * of the RARs and no incoming packets directed to this port
3636                  * are dropped. Eventually the LAA will be in RAR[0] and
3637                  * RAR[14]
3638                  */
3639                 e1000e_rar_set(&adapter->hw,
3640                               adapter->hw.mac.addr,
3641                               adapter->hw.mac.rar_entry_count - 1);
3642         }
3643
3644         return 0;
3645 }
3646
3647 /**
3648  * e1000e_update_phy_task - work thread to update phy
3649  * @work: pointer to our work struct
3650  *
3651  * this worker thread exists because we must acquire a
3652  * semaphore to read the phy, which we could msleep while
3653  * waiting for it, and we can't msleep in a timer.
3654  **/
3655 static void e1000e_update_phy_task(struct work_struct *work)
3656 {
3657         struct e1000_adapter *adapter = container_of(work,
3658                                         struct e1000_adapter, update_phy_task);
3659         e1000_get_phy_info(&adapter->hw);
3660 }
3661
3662 /*
3663  * Need to wait a few seconds after link up to get diagnostic information from
3664  * the phy
3665  */
3666 static void e1000_update_phy_info(unsigned long data)
3667 {
3668         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3669         schedule_work(&adapter->update_phy_task);
3670 }
3671
3672 /**
3673  * e1000e_update_stats - Update the board statistics counters
3674  * @adapter: board private structure
3675  **/
3676 void e1000e_update_stats(struct e1000_adapter *adapter)
3677 {
3678         struct net_device *netdev = adapter->netdev;
3679         struct e1000_hw *hw = &adapter->hw;
3680         struct pci_dev *pdev = adapter->pdev;
3681         u16 phy_data;
3682
3683         /*
3684          * Prevent stats update while adapter is being reset, or if the pci
3685          * connection is down.
3686          */
3687         if (adapter->link_speed == 0)
3688                 return;
3689         if (pci_channel_offline(pdev))
3690                 return;
3691
3692         adapter->stats.crcerrs += er32(CRCERRS);
3693         adapter->stats.gprc += er32(GPRC);
3694         adapter->stats.gorc += er32(GORCL);
3695         er32(GORCH); /* Clear gorc */
3696         adapter->stats.bprc += er32(BPRC);
3697         adapter->stats.mprc += er32(MPRC);
3698         adapter->stats.roc += er32(ROC);
3699
3700         adapter->stats.mpc += er32(MPC);
3701         if ((hw->phy.type == e1000_phy_82578) ||
3702             (hw->phy.type == e1000_phy_82577)) {
3703                 e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
3704                 if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
3705                         adapter->stats.scc += phy_data;
3706
3707                 e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
3708                 if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
3709                         adapter->stats.ecol += phy_data;
3710
3711                 e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
3712                 if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
3713                         adapter->stats.mcc += phy_data;
3714
3715                 e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
3716                 if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
3717                         adapter->stats.latecol += phy_data;
3718
3719                 e1e_rphy(hw, HV_DC_UPPER, &phy_data);
3720                 if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
3721                         adapter->stats.dc += phy_data;
3722         } else {
3723                 adapter->stats.scc += er32(SCC);
3724                 adapter->stats.ecol += er32(ECOL);
3725                 adapter->stats.mcc += er32(MCC);
3726                 adapter->stats.latecol += er32(LATECOL);
3727                 adapter->stats.dc += er32(DC);
3728         }
3729         adapter->stats.xonrxc += er32(XONRXC);
3730         adapter->stats.xontxc += er32(XONTXC);
3731         adapter->stats.xoffrxc += er32(XOFFRXC);
3732         adapter->stats.xofftxc += er32(XOFFTXC);
3733         adapter->stats.gptc += er32(GPTC);
3734         adapter->stats.gotc += er32(GOTCL);
3735         er32(GOTCH); /* Clear gotc */
3736         adapter->stats.rnbc += er32(RNBC);
3737         adapter->stats.ruc += er32(RUC);
3738
3739         adapter->stats.mptc += er32(MPTC);
3740         adapter->stats.bptc += er32(BPTC);
3741
3742         /* used for adaptive IFS */
3743
3744         hw->mac.tx_packet_delta = er32(TPT);
3745         adapter->stats.tpt += hw->mac.tx_packet_delta;
3746         if ((hw->phy.type == e1000_phy_82578) ||
3747             (hw->phy.type == e1000_phy_82577)) {
3748                 e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
3749                 if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
3750                         hw->mac.collision_delta = phy_data;
3751         } else {
3752                 hw->mac.collision_delta = er32(COLC);
3753         }
3754         adapter->stats.colc += hw->mac.collision_delta;
3755
3756         adapter->stats.algnerrc += er32(ALGNERRC);
3757         adapter->stats.rxerrc += er32(RXERRC);
3758         if ((hw->phy.type == e1000_phy_82578) ||
3759             (hw->phy.type == e1000_phy_82577)) {
3760                 e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
3761                 if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
3762                         adapter->stats.tncrs += phy_data;
3763         } else {
3764                 if ((hw->mac.type != e1000_82574) &&
3765                     (hw->mac.type != e1000_82583))
3766                         adapter->stats.tncrs += er32(TNCRS);
3767         }
3768         adapter->stats.cexterr += er32(CEXTERR);
3769         adapter->stats.tsctc += er32(TSCTC);
3770         adapter->stats.tsctfc += er32(TSCTFC);
3771
3772         /* Fill out the OS statistics structure */
3773         netdev->stats.multicast = adapter->stats.mprc;
3774         netdev->stats.collisions = adapter->stats.colc;
3775
3776         /* Rx Errors */
3777
3778         /*
3779          * RLEC on some newer hardware can be incorrect so build
3780          * our own version based on RUC and ROC
3781          */
3782         netdev->stats.rx_errors = adapter->stats.rxerrc +
3783                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3784                 adapter->stats.ruc + adapter->stats.roc +
3785                 adapter->stats.cexterr;
3786         netdev->stats.rx_length_errors = adapter->stats.ruc +
3787                                               adapter->stats.roc;
3788         netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3789         netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3790         netdev->stats.rx_missed_errors = adapter->stats.mpc;
3791
3792         /* Tx Errors */
3793         netdev->stats.tx_errors = adapter->stats.ecol +
3794                                        adapter->stats.latecol;
3795         netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3796         netdev->stats.tx_window_errors = adapter->stats.latecol;
3797         netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3798
3799         /* Tx Dropped needs to be maintained elsewhere */
3800
3801         /* Management Stats */
3802         adapter->stats.mgptc += er32(MGTPTC);
3803         adapter->stats.mgprc += er32(MGTPRC);
3804         adapter->stats.mgpdc += er32(MGTPDC);
3805 }
3806
3807 /**
3808  * e1000_phy_read_status - Update the PHY register status snapshot
3809  * @adapter: board private structure
3810  **/
3811 static void e1000_phy_read_status(struct e1000_adapter *adapter)
3812 {
3813         struct e1000_hw *hw = &adapter->hw;
3814         struct e1000_phy_regs *phy = &adapter->phy_regs;
3815         int ret_val;
3816
3817         if ((er32(STATUS) & E1000_STATUS_LU) &&
3818             (adapter->hw.phy.media_type == e1000_media_type_copper)) {
3819                 ret_val  = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
3820                 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
3821                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
3822                 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
3823                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
3824                 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
3825                 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
3826                 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
3827                 if (ret_val)
3828                         e_warn("Error reading PHY register\n");
3829         } else {
3830                 /*
3831                  * Do not read PHY registers if link is not up
3832                  * Set values to typical power-on defaults
3833                  */
3834                 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
3835                 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
3836                              BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
3837                              BMSR_ERCAP);
3838                 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
3839                                   ADVERTISE_ALL | ADVERTISE_CSMA);
3840                 phy->lpa = 0;
3841                 phy->expansion = EXPANSION_ENABLENPAGE;
3842                 phy->ctrl1000 = ADVERTISE_1000FULL;
3843                 phy->stat1000 = 0;
3844                 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
3845         }
3846 }
3847
3848 static void e1000_print_link_info(struct e1000_adapter *adapter)
3849 {
3850         struct e1000_hw *hw = &adapter->hw;
3851         u32 ctrl = er32(CTRL);
3852
3853         /* Link status message must follow this format for user tools */
3854         printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
3855                "Flow Control: %s\n",
3856                adapter->netdev->name,
3857                adapter->link_speed,
3858                (adapter->link_duplex == FULL_DUPLEX) ?
3859                                 "Full Duplex" : "Half Duplex",
3860                ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
3861                                 "RX/TX" :
3862                ((ctrl & E1000_CTRL_RFCE) ? "RX" :
3863                ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
3864 }
3865
3866 bool e1000e_has_link(struct e1000_adapter *adapter)
3867 {
3868         struct e1000_hw *hw = &adapter->hw;
3869         bool link_active = 0;
3870         s32 ret_val = 0;
3871
3872         /*
3873          * get_link_status is set on LSC (link status) interrupt or
3874          * Rx sequence error interrupt.  get_link_status will stay
3875          * false until the check_for_link establishes link
3876          * for copper adapters ONLY
3877          */
3878         switch (hw->phy.media_type) {
3879         case e1000_media_type_copper:
3880                 if (hw->mac.get_link_status) {
3881                         ret_val = hw->mac.ops.check_for_link(hw);
3882                         link_active = !hw->mac.get_link_status;
3883                 } else {
3884                         link_active = 1;
3885                 }
3886                 break;
3887         case e1000_media_type_fiber:
3888                 ret_val = hw->mac.ops.check_for_link(hw);
3889                 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
3890                 break;
3891         case e1000_media_type_internal_serdes:
3892                 ret_val = hw->mac.ops.check_for_link(hw);
3893                 link_active = adapter->hw.mac.serdes_has_link;
3894                 break;
3895         default:
3896         case e1000_media_type_unknown:
3897                 break;
3898         }
3899
3900         if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
3901             (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
3902                 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
3903                 e_info("Gigabit has been disabled, downgrading speed\n");
3904         }
3905
3906         return link_active;
3907 }
3908
3909 static void e1000e_enable_receives(struct e1000_adapter *adapter)
3910 {
3911         /* make sure the receive unit is started */
3912         if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
3913             (adapter->flags & FLAG_RX_RESTART_NOW)) {
3914                 struct e1000_hw *hw = &adapter->hw;
3915                 u32 rctl = er32(RCTL);
3916                 ew32(RCTL, rctl | E1000_RCTL_EN);
3917                 adapter->flags &= ~FLAG_RX_RESTART_NOW;
3918         }
3919 }
3920
3921 /**
3922  * e1000_watchdog - Timer Call-back
3923  * @data: pointer to adapter cast into an unsigned long
3924  **/
3925 static void e1000_watchdog(unsigned long data)
3926 {
3927         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3928
3929         /* Do the rest outside of interrupt context */
3930         schedule_work(&adapter->watchdog_task);
3931
3932         /* TODO: make this use queue_delayed_work() */
3933 }
3934
3935 static void e1000_watchdog_task(struct work_struct *work)
3936 {
3937         struct e1000_adapter *adapter = container_of(work,
3938                                         struct e1000_adapter, watchdog_task);
3939         struct net_device *netdev = adapter->netdev;
3940         struct e1000_mac_info *mac = &adapter->hw.mac;
3941         struct e1000_phy_info *phy = &adapter->hw.phy;
3942         struct e1000_ring *tx_ring = adapter->tx_ring;
3943         struct e1000_hw *hw = &adapter->hw;
3944         u32 link, tctl;
3945         int tx_pending = 0;
3946
3947         link = e1000e_has_link(adapter);
3948         if ((netif_carrier_ok(netdev)) && link) {
3949                 /* Cancel scheduled suspend requests. */
3950                 pm_runtime_resume(netdev->dev.parent);
3951
3952                 e1000e_enable_receives(adapter);
3953                 goto link_up;
3954         }
3955
3956         if ((e1000e_enable_tx_pkt_filtering(hw)) &&
3957             (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
3958                 e1000_update_mng_vlan(adapter);
3959
3960         if (link) {
3961                 if (!netif_carrier_ok(netdev)) {
3962                         bool txb2b = 1;
3963
3964                         /* Cancel scheduled suspend requests. */
3965                         pm_runtime_resume(netdev->dev.parent);
3966
3967                         /* update snapshot of PHY registers on LSC */
3968                         e1000_phy_read_status(adapter);
3969                         mac->ops.get_link_up_info(&adapter->hw,
3970                                                    &adapter->link_speed,
3971                                                    &adapter->link_duplex);
3972                         e1000_print_link_info(adapter);
3973                         /*
3974                          * On supported PHYs, check for duplex mismatch only
3975                          * if link has autonegotiated at 10/100 half
3976                          */
3977                         if ((hw->phy.type == e1000_phy_igp_3 ||
3978                              hw->phy.type == e1000_phy_bm) &&
3979                             (hw->mac.autoneg == true) &&
3980                             (adapter->link_speed == SPEED_10 ||
3981                              adapter->link_speed == SPEED_100) &&
3982                             (adapter->link_duplex == HALF_DUPLEX)) {
3983                                 u16 autoneg_exp;
3984
3985                                 e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
3986
3987                                 if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
3988                                         e_info("Autonegotiated half duplex but"
3989                                                " link partner cannot autoneg. "
3990                                                " Try forcing full duplex if "
3991                                                "link gets many collisions.\n");
3992                         }
3993
3994                         /* adjust timeout factor according to speed/duplex */
3995                         adapter->tx_timeout_factor = 1;
3996                         switch (adapter->link_speed) {
3997                         case SPEED_10:
3998                                 txb2b = 0;
3999                                 adapter->tx_timeout_factor = 16;
4000                                 break;
4001                         case SPEED_100:
4002                                 txb2b = 0;
4003                                 adapter->tx_timeout_factor = 10;
4004                                 break;
4005                         }
4006
4007                         /*
4008                          * workaround: re-program speed mode bit after
4009                          * link-up event
4010                          */
4011                         if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
4012                             !txb2b) {
4013                                 u32 tarc0;
4014                                 tarc0 = er32(TARC(0));
4015                                 tarc0 &= ~SPEED_MODE_BIT;
4016                                 ew32(TARC(0), tarc0);
4017                         }
4018
4019                         /*
4020                          * disable TSO for pcie and 10/100 speeds, to avoid
4021                          * some hardware issues
4022                          */
4023                         if (!(adapter->flags & FLAG_TSO_FORCE)) {
4024                                 switch (adapter->link_speed) {
4025                                 case SPEED_10:
4026                                 case SPEED_100:
4027                                         e_info("10/100 speed: disabling TSO\n");
4028                                         netdev->features &= ~NETIF_F_TSO;
4029                                         netdev->features &= ~NETIF_F_TSO6;
4030                                         break;
4031                                 case SPEED_1000:
4032                                         netdev->features |= NETIF_F_TSO;
4033                                         netdev->features |= NETIF_F_TSO6;
4034                                         break;
4035                                 default:
4036                                         /* oops */
4037                                         break;
4038                                 }
4039                         }
4040
4041                         /*
4042                          * enable transmits in the hardware, need to do this
4043                          * after setting TARC(0)
4044                          */
4045                         tctl = er32(TCTL);
4046                         tctl |= E1000_TCTL_EN;
4047                         ew32(TCTL, tctl);
4048
4049                         /*
4050                          * Perform any post-link-up configuration before
4051                          * reporting link up.
4052                          */
4053                         if (phy->ops.cfg_on_link_up)
4054                                 phy->ops.cfg_on_link_up(hw);
4055
4056                         netif_carrier_on(netdev);
4057
4058                         if (!test_bit(__E1000_DOWN, &adapter->state))
4059                                 mod_timer(&adapter->phy_info_timer,
4060                                           round_jiffies(jiffies + 2 * HZ));
4061                 }
4062         } else {
4063                 if (netif_carrier_ok(netdev)) {
4064                         adapter->link_speed = 0;
4065                         adapter->link_duplex = 0;
4066                         /* Link status message must follow this format */
4067                         printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
4068                                adapter->netdev->name);
4069                         netif_carrier_off(netdev);
4070                         if (!test_bit(__E1000_DOWN, &adapter->state))
4071                                 mod_timer(&adapter->phy_info_timer,
4072                                           round_jiffies(jiffies + 2 * HZ));
4073
4074                         if (adapter->flags & FLAG_RX_NEEDS_RESTART)
4075                                 schedule_work(&adapter->reset_task);
4076                         else
4077                                 pm_schedule_suspend(netdev->dev.parent,
4078                                                         LINK_TIMEOUT);
4079                 }
4080         }
4081
4082 link_up:
4083         e1000e_update_stats(adapter);
4084
4085         mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
4086         adapter->tpt_old = adapter->stats.tpt;
4087         mac->collision_delta = adapter->stats.colc - adapter->colc_old;
4088         adapter->colc_old = adapter->stats.colc;
4089
4090         adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
4091         adapter->gorc_old = adapter->stats.gorc;
4092         adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
4093         adapter->gotc_old = adapter->stats.gotc;
4094
4095         e1000e_update_adaptive(&adapter->hw);
4096
4097         if (!netif_carrier_ok(netdev)) {
4098                 tx_pending = (e1000_desc_unused(tx_ring) + 1 <
4099                                tx_ring->count);
4100                 if (tx_pending) {
4101                         /*
4102                          * We've lost link, so the controller stops DMA,
4103                          * but we've got queued Tx work that's never going
4104                          * to get done, so reset controller to flush Tx.
4105                          * (Do the reset outside of interrupt context).
4106                          */
4107                         adapter->tx_timeout_count++;
4108                         schedule_work(&adapter->reset_task);
4109                         /* return immediately since reset is imminent */
4110                         return;
4111                 }
4112         }
4113
4114         /* Simple mode for Interrupt Throttle Rate (ITR) */
4115         if (adapter->itr_setting == 4) {
4116                 /*
4117                  * Symmetric Tx/Rx gets a reduced ITR=2000;
4118                  * Total asymmetrical Tx or Rx gets ITR=8000;
4119                  * everyone else is between 2000-8000.
4120                  */
4121                 u32 goc = (adapter->gotc + adapter->gorc) / 10000;
4122                 u32 dif = (adapter->gotc > adapter->gorc ?
4123                             adapter->gotc - adapter->gorc :
4124                             adapter->gorc - adapter->gotc) / 10000;
4125                 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
4126
4127                 ew32(ITR, 1000000000 / (itr * 256));
4128         }
4129
4130         /* Cause software interrupt to ensure Rx ring is cleaned */
4131         if (adapter->msix_entries)
4132                 ew32(ICS, adapter->rx_ring->ims_val);
4133         else
4134                 ew32(ICS, E1000_ICS_RXDMT0);
4135
4136         /* Force detection of hung controller every watchdog period */
4137         adapter->detect_tx_hung = 1;
4138
4139         /*
4140          * With 82571 controllers, LAA may be overwritten due to controller
4141          * reset from the other port. Set the appropriate LAA in RAR[0]
4142          */
4143         if (e1000e_get_laa_state_82571(hw))
4144                 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
4145
4146         /* Reset the timer */
4147         if (!test_bit(__E1000_DOWN, &adapter->state))
4148                 mod_timer(&adapter->watchdog_timer,
4149                           round_jiffies(jiffies + 2 * HZ));
4150 }
4151
4152 #define E1000_TX_FLAGS_CSUM             0x00000001
4153 #define E1000_TX_FLAGS_VLAN             0x00000002
4154 #define E1000_TX_FLAGS_TSO              0x00000004
4155 #define E1000_TX_FLAGS_IPV4             0x00000008
4156 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
4157 #define E1000_TX_FLAGS_VLAN_SHIFT       16
4158
4159 static int e1000_tso(struct e1000_adapter *adapter,
4160                      struct sk_buff *skb)
4161 {
4162         struct e1000_ring *tx_ring = adapter->tx_ring;
4163         struct e1000_context_desc *context_desc;
4164         struct e1000_buffer *buffer_info;
4165         unsigned int i;
4166         u32 cmd_length = 0;
4167         u16 ipcse = 0, tucse, mss;
4168         u8 ipcss, ipcso, tucss, tucso, hdr_len;
4169         int err;
4170
4171         if (!skb_is_gso(skb))
4172                 return 0;
4173
4174         if (skb_header_cloned(skb)) {
4175                 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
4176                 if (err)
4177                         return err;
4178         }
4179
4180         hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4181         mss = skb_shinfo(skb)->gso_size;
4182         if (skb->protocol == htons(ETH_P_IP)) {
4183                 struct iphdr *iph = ip_hdr(skb);
4184                 iph->tot_len = 0;
4185                 iph->check = 0;
4186                 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
4187                                                          0, IPPROTO_TCP, 0);
4188                 cmd_length = E1000_TXD_CMD_IP;
4189                 ipcse = skb_transport_offset(skb) - 1;
4190         } else if (skb_is_gso_v6(skb)) {
4191                 ipv6_hdr(skb)->payload_len = 0;
4192                 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
4193                                                        &ipv6_hdr(skb)->daddr,
4194                                                        0, IPPROTO_TCP, 0);
4195                 ipcse = 0;
4196         }
4197         ipcss = skb_network_offset(skb);
4198         ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
4199         tucss = skb_transport_offset(skb);
4200         tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
4201         tucse = 0;
4202
4203         cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
4204                        E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
4205
4206         i = tx_ring->next_to_use;
4207         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4208         buffer_info = &tx_ring->buffer_info[i];
4209
4210         context_desc->lower_setup.ip_fields.ipcss  = ipcss;
4211         context_desc->lower_setup.ip_fields.ipcso  = ipcso;
4212         context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
4213         context_desc->upper_setup.tcp_fields.tucss = tucss;
4214         context_desc->upper_setup.tcp_fields.tucso = tucso;
4215         context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
4216         context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
4217         context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
4218         context_desc->cmd_and_length = cpu_to_le32(cmd_length);
4219
4220         buffer_info->time_stamp = jiffies;
4221         buffer_info->next_to_watch = i;
4222
4223         i++;
4224         if (i == tx_ring->count)
4225                 i = 0;
4226         tx_ring->next_to_use = i;
4227
4228         return 1;
4229 }
4230
4231 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
4232 {
4233         struct e1000_ring *tx_ring = adapter->tx_ring;
4234         struct e1000_context_desc *context_desc;
4235         struct e1000_buffer *buffer_info;
4236         unsigned int i;
4237         u8 css;
4238         u32 cmd_len = E1000_TXD_CMD_DEXT;
4239         __be16 protocol;
4240
4241         if (skb->ip_summed != CHECKSUM_PARTIAL)
4242                 return 0;
4243
4244         if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
4245                 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
4246         else
4247                 protocol = skb->protocol;
4248
4249         switch (protocol) {
4250         case cpu_to_be16(ETH_P_IP):
4251                 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
4252                         cmd_len |= E1000_TXD_CMD_TCP;
4253                 break;
4254         case cpu_to_be16(ETH_P_IPV6):
4255                 /* XXX not handling all IPV6 headers */
4256                 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
4257                         cmd_len |= E1000_TXD_CMD_TCP;
4258                 break;
4259         default:
4260                 if (unlikely(net_ratelimit()))
4261                         e_warn("checksum_partial proto=%x!\n",
4262                                be16_to_cpu(protocol));
4263                 break;
4264         }
4265
4266         css = skb_transport_offset(skb);
4267
4268         i = tx_ring->next_to_use;
4269         buffer_info = &tx_ring->buffer_info[i];
4270         context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4271
4272         context_desc->lower_setup.ip_config = 0;
4273         context_desc->upper_setup.tcp_fields.tucss = css;
4274         context_desc->upper_setup.tcp_fields.tucso =
4275                                 css + skb->csum_offset;
4276         context_desc->upper_setup.tcp_fields.tucse = 0;
4277         context_desc->tcp_seg_setup.data = 0;
4278         context_desc->cmd_and_length = cpu_to_le32(cmd_len);
4279
4280         buffer_info->time_stamp = jiffies;
4281         buffer_info->next_to_watch = i;
4282
4283         i++;
4284         if (i == tx_ring->count)
4285                 i = 0;
4286         tx_ring->next_to_use = i;
4287
4288         return 1;
4289 }
4290
4291 #define E1000_MAX_PER_TXD       8192
4292 #define E1000_MAX_TXD_PWR       12
4293
4294 static int e1000_tx_map(struct e1000_adapter *adapter,
4295                         struct sk_buff *skb, unsigned int first,
4296                         unsigned int max_per_txd, unsigned int nr_frags,
4297                         unsigned int mss)
4298 {
4299         struct e1000_ring *tx_ring = adapter->tx_ring;
4300         struct pci_dev *pdev = adapter->pdev;
4301         struct e1000_buffer *buffer_info;
4302         unsigned int len = skb_headlen(skb);
4303         unsigned int offset = 0, size, count = 0, i;
4304         unsigned int f, bytecount, segs;
4305
4306         i = tx_ring->next_to_use;
4307
4308         while (len) {
4309                 buffer_info = &tx_ring->buffer_info[i];
4310                 size = min(len, max_per_txd);
4311
4312                 buffer_info->length = size;
4313                 buffer_info->time_stamp = jiffies;
4314                 buffer_info->next_to_watch = i;
4315                 buffer_info->dma = dma_map_single(&pdev->dev,
4316                                                   skb->data + offset,
4317                                                   size, DMA_TO_DEVICE);
4318                 buffer_info->mapped_as_page = false;
4319                 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4320                         goto dma_error;
4321
4322                 len -= size;
4323                 offset += size;
4324                 count++;
4325
4326                 if (len) {
4327                         i++;
4328                         if (i == tx_ring->count)
4329                                 i = 0;
4330                 }
4331         }
4332
4333         for (f = 0; f < nr_frags; f++) {
4334                 struct skb_frag_struct *frag;
4335
4336                 frag = &skb_shinfo(skb)->frags[f];
4337                 len = frag->size;
4338                 offset = frag->page_offset;
4339
4340                 while (len) {
4341                         i++;
4342                         if (i == tx_ring->count)
4343                                 i = 0;
4344
4345                         buffer_info = &tx_ring->buffer_info[i];
4346                         size = min(len, max_per_txd);
4347
4348                         buffer_info->length = size;
4349                         buffer_info->time_stamp = jiffies;
4350                         buffer_info->next_to_watch = i;
4351                         buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
4352                                                         offset, size,
4353                                                         DMA_TO_DEVICE);
4354                         buffer_info->mapped_as_page = true;
4355                         if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4356                                 goto dma_error;
4357
4358                         len -= size;
4359                         offset += size;
4360                         count++;
4361                 }
4362         }
4363
4364         segs = skb_shinfo(skb)->gso_segs ?: 1;
4365         /* multiply data chunks by size of headers */
4366         bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
4367
4368         tx_ring->buffer_info[i].skb = skb;
4369         tx_ring->buffer_info[i].segs = segs;
4370         tx_ring->buffer_info[i].bytecount = bytecount;
4371         tx_ring->buffer_info[first].next_to_watch = i;
4372
4373         return count;
4374
4375 dma_error:
4376         dev_err(&pdev->dev, "TX DMA map failed\n");
4377         buffer_info->dma = 0;
4378         if (count)
4379                 count--;
4380
4381         while (count--) {
4382                 if (i==0)
4383                         i += tx_ring->count;
4384                 i--;
4385                 buffer_info = &tx_ring->buffer_info[i];
4386                 e1000_put_txbuf(adapter, buffer_info);;
4387         }
4388
4389         return 0;
4390 }
4391
4392 static void e1000_tx_queue(struct e1000_adapter *adapter,
4393                            int tx_flags, int count)
4394 {
4395         struct e1000_ring *tx_ring = adapter->tx_ring;
4396         struct e1000_tx_desc *tx_desc = NULL;
4397         struct e1000_buffer *buffer_info;
4398         u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
4399         unsigned int i;
4400
4401         if (tx_flags & E1000_TX_FLAGS_TSO) {
4402                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
4403                              E1000_TXD_CMD_TSE;
4404                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4405
4406                 if (tx_flags & E1000_TX_FLAGS_IPV4)
4407                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
4408         }
4409
4410         if (tx_flags & E1000_TX_FLAGS_CSUM) {
4411                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
4412                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4413         }
4414
4415         if (tx_flags & E1000_TX_FLAGS_VLAN) {
4416                 txd_lower |= E1000_TXD_CMD_VLE;
4417                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
4418         }
4419
4420         i = tx_ring->next_to_use;
4421
4422         while (count--) {
4423                 buffer_info = &tx_ring->buffer_info[i];
4424                 tx_desc = E1000_TX_DESC(*tx_ring, i);
4425                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4426                 tx_desc->lower.data =
4427                         cpu_to_le32(txd_lower | buffer_info->length);
4428                 tx_desc->upper.data = cpu_to_le32(txd_upper);
4429
4430                 i++;
4431                 if (i == tx_ring->count)
4432                         i = 0;
4433         }
4434
4435         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
4436
4437         /*
4438          * Force memory writes to complete before letting h/w
4439          * know there are new descriptors to fetch.  (Only
4440          * applicable for weak-ordered memory model archs,
4441          * such as IA-64).
4442          */
4443         wmb();
4444
4445         tx_ring->next_to_use = i;
4446         writel(i, adapter->hw.hw_addr + tx_ring->tail);
4447         /*
4448          * we need this if more than one processor can write to our tail
4449          * at a time, it synchronizes IO on IA64/Altix systems
4450          */
4451         mmiowb();
4452 }
4453
4454 #define MINIMUM_DHCP_PACKET_SIZE 282
4455 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
4456                                     struct sk_buff *skb)
4457 {
4458         struct e1000_hw *hw =  &adapter->hw;
4459         u16 length, offset;
4460
4461         if (vlan_tx_tag_present(skb)) {
4462                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
4463                     (adapter->hw.mng_cookie.status &
4464                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
4465                         return 0;
4466         }
4467
4468         if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
4469                 return 0;
4470
4471         if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
4472                 return 0;
4473
4474         {
4475                 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
4476                 struct udphdr *udp;
4477
4478                 if (ip->protocol != IPPROTO_UDP)
4479                         return 0;
4480
4481                 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
4482                 if (ntohs(udp->dest) != 67)
4483                         return 0;
4484
4485                 offset = (u8 *)udp + 8 - skb->data;
4486                 length = skb->len - offset;
4487                 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
4488         }
4489
4490         return 0;
4491 }
4492
4493 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
4494 {
4495         struct e1000_adapter *adapter = netdev_priv(netdev);
4496
4497         netif_stop_queue(netdev);
4498         /*
4499          * Herbert's original patch had:
4500          *  smp_mb__after_netif_stop_queue();
4501          * but since that doesn't exist yet, just open code it.
4502          */
4503         smp_mb();
4504
4505         /*
4506          * We need to check again in a case another CPU has just
4507          * made room available.
4508          */
4509         if (e1000_desc_unused(adapter->tx_ring) < size)
4510                 return -EBUSY;
4511
4512         /* A reprieve! */
4513         netif_start_queue(netdev);
4514         ++adapter->restart_queue;
4515         return 0;
4516 }
4517
4518 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
4519 {
4520         struct e1000_adapter *adapter = netdev_priv(netdev);
4521
4522         if (e1000_desc_unused(adapter->tx_ring) >= size)
4523                 return 0;
4524         return __e1000_maybe_stop_tx(netdev, size);
4525 }
4526
4527 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
4528 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
4529                                     struct net_device *netdev)
4530 {
4531         struct e1000_adapter *adapter = netdev_priv(netdev);
4532         struct e1000_ring *tx_ring = adapter->tx_ring;
4533         unsigned int first;
4534         unsigned int max_per_txd = E1000_MAX_PER_TXD;
4535         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
4536         unsigned int tx_flags = 0;
4537         unsigned int len = skb_headlen(skb);
4538         unsigned int nr_frags;
4539         unsigned int mss;
4540         int count = 0;
4541         int tso;
4542         unsigned int f;
4543
4544         if (test_bit(__E1000_DOWN, &adapter->state)) {
4545                 dev_kfree_skb_any(skb);
4546                 return NETDEV_TX_OK;
4547         }
4548
4549         if (skb->len <= 0) {
4550                 dev_kfree_skb_any(skb);
4551                 return NETDEV_TX_OK;
4552         }
4553
4554         mss = skb_shinfo(skb)->gso_size;
4555         /*
4556          * The controller does a simple calculation to
4557          * make sure there is enough room in the FIFO before
4558          * initiating the DMA for each buffer.  The calc is:
4559          * 4 = ceil(buffer len/mss).  To make sure we don't
4560          * overrun the FIFO, adjust the max buffer len if mss
4561          * drops.
4562          */
4563         if (mss) {
4564                 u8 hdr_len;
4565                 max_per_txd = min(mss << 2, max_per_txd);
4566                 max_txd_pwr = fls(max_per_txd) - 1;
4567
4568                 /*
4569                  * TSO Workaround for 82571/2/3 Controllers -- if skb->data
4570                  * points to just header, pull a few bytes of payload from
4571                  * frags into skb->data
4572                  */
4573                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4574                 /*
4575                  * we do this workaround for ES2LAN, but it is un-necessary,
4576                  * avoiding it could save a lot of cycles
4577                  */
4578                 if (skb->data_len && (hdr_len == len)) {
4579                         unsigned int pull_size;
4580
4581                         pull_size = min((unsigned int)4, skb->data_len);
4582                         if (!__pskb_pull_tail(skb, pull_size)) {
4583                                 e_err("__pskb_pull_tail failed.\n");
4584                                 dev_kfree_skb_any(skb);
4585                                 return NETDEV_TX_OK;
4586                         }
4587                         len = skb_headlen(skb);
4588                 }
4589         }
4590
4591         /* reserve a descriptor for the offload context */
4592         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
4593                 count++;
4594         count++;
4595
4596         count += TXD_USE_COUNT(len, max_txd_pwr);
4597
4598         nr_frags = skb_shinfo(skb)->nr_frags;
4599         for (f = 0; f < nr_frags; f++)
4600                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
4601                                        max_txd_pwr);
4602
4603         if (adapter->hw.mac.tx_pkt_filtering)
4604                 e1000_transfer_dhcp_info(adapter, skb);
4605
4606         /*
4607          * need: count + 2 desc gap to keep tail from touching
4608          * head, otherwise try next time
4609          */
4610         if (e1000_maybe_stop_tx(netdev, count + 2))
4611                 return NETDEV_TX_BUSY;
4612
4613         if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
4614                 tx_flags |= E1000_TX_FLAGS_VLAN;
4615                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
4616         }
4617
4618         first = tx_ring->next_to_use;
4619
4620         tso = e1000_tso(adapter, skb);
4621         if (tso < 0) {
4622                 dev_kfree_skb_any(skb);
4623                 return NETDEV_TX_OK;
4624         }
4625
4626         if (tso)
4627                 tx_flags |= E1000_TX_FLAGS_TSO;
4628         else if (e1000_tx_csum(adapter, skb))
4629                 tx_flags |= E1000_TX_FLAGS_CSUM;
4630
4631         /*
4632          * Old method was to assume IPv4 packet by default if TSO was enabled.
4633          * 82571 hardware supports TSO capabilities for IPv6 as well...
4634          * no longer assume, we must.
4635          */
4636         if (skb->protocol == htons(ETH_P_IP))
4637                 tx_flags |= E1000_TX_FLAGS_IPV4;
4638
4639         /* if count is 0 then mapping error has occured */
4640         count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
4641         if (count) {
4642                 e1000_tx_queue(adapter, tx_flags, count);
4643                 /* Make sure there is space in the ring for the next send. */
4644                 e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
4645
4646         } else {
4647                 dev_kfree_skb_any(skb);
4648                 tx_ring->buffer_info[first].time_stamp = 0;
4649                 tx_ring->next_to_use = first;
4650         }
4651
4652         return NETDEV_TX_OK;
4653 }
4654
4655 /**
4656  * e1000_tx_timeout - Respond to a Tx Hang
4657  * @netdev: network interface device structure
4658  **/
4659 static void e1000_tx_timeout(struct net_device *netdev)
4660 {
4661         struct e1000_adapter *adapter = netdev_priv(netdev);
4662
4663         /* Do the reset outside of interrupt context */
4664         adapter->tx_timeout_count++;
4665         schedule_work(&adapter->reset_task);
4666 }
4667
4668 static void e1000_reset_task(struct work_struct *work)
4669 {
4670         struct e1000_adapter *adapter;
4671         adapter = container_of(work, struct e1000_adapter, reset_task);
4672
4673         e1000e_dump(adapter);
4674         e_err("Reset adapter\n");
4675         e1000e_reinit_locked(adapter);
4676 }
4677
4678 /**
4679  * e1000_get_stats - Get System Network Statistics
4680  * @netdev: network interface device structure
4681  *
4682  * Returns the address of the device statistics structure.
4683  * The statistics are actually updated from the timer callback.
4684  **/
4685 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
4686 {
4687         /* only return the current stats */
4688         return &netdev->stats;
4689 }
4690
4691 /**
4692  * e1000_change_mtu - Change the Maximum Transfer Unit
4693  * @netdev: network interface device structure
4694  * @new_mtu: new value for maximum frame size
4695  *
4696  * Returns 0 on success, negative on failure
4697  **/
4698 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
4699 {
4700         struct e1000_adapter *adapter = netdev_priv(netdev);
4701         int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
4702
4703         /* Jumbo frame support */
4704         if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
4705             !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
4706                 e_err("Jumbo Frames not supported.\n");
4707                 return -EINVAL;
4708         }
4709
4710         /* Supported frame sizes */
4711         if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
4712             (max_frame > adapter->max_hw_frame_size)) {
4713                 e_err("Unsupported MTU setting\n");
4714                 return -EINVAL;
4715         }
4716
4717         /* 82573 Errata 17 */
4718         if (((adapter->hw.mac.type == e1000_82573) ||
4719              (adapter->hw.mac.type == e1000_82574)) &&
4720             (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
4721                 adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
4722                 e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
4723         }
4724
4725         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4726                 msleep(1);
4727         /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
4728         adapter->max_frame_size = max_frame;
4729         e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
4730         netdev->mtu = new_mtu;
4731         if (netif_running(netdev))
4732                 e1000e_down(adapter);
4733
4734         /*
4735          * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4736          * means we reserve 2 more, this pushes us to allocate from the next
4737          * larger slab size.
4738          * i.e. RXBUFFER_2048 --> size-4096 slab
4739          * However with the new *_jumbo_rx* routines, jumbo receives will use
4740          * fragmented skbs
4741          */
4742
4743         if (max_frame <= 2048)
4744                 adapter->rx_buffer_len = 2048;
4745         else
4746                 adapter->rx_buffer_len = 4096;
4747
4748         /* adjust allocation if LPE protects us, and we aren't using SBP */
4749         if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
4750              (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
4751                 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
4752                                          + ETH_FCS_LEN;
4753
4754         if (netif_running(netdev))
4755                 e1000e_up(adapter);
4756         else
4757                 e1000e_reset(adapter);
4758
4759         clear_bit(__E1000_RESETTING, &adapter->state);
4760
4761         return 0;
4762 }
4763
4764 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4765                            int cmd)
4766 {
4767         struct e1000_adapter *adapter = netdev_priv(netdev);
4768         struct mii_ioctl_data *data = if_mii(ifr);
4769
4770         if (adapter->hw.phy.media_type != e1000_media_type_copper)
4771                 return -EOPNOTSUPP;
4772
4773         switch (cmd) {
4774         case SIOCGMIIPHY:
4775                 data->phy_id = adapter->hw.phy.addr;
4776                 break;
4777         case SIOCGMIIREG:
4778                 e1000_phy_read_status(adapter);
4779
4780                 switch (data->reg_num & 0x1F) {
4781                 case MII_BMCR:
4782                         data->val_out = adapter->phy_regs.bmcr;
4783                         break;
4784                 case MII_BMSR:
4785                         data->val_out = adapter->phy_regs.bmsr;
4786                         break;
4787                 case MII_PHYSID1:
4788                         data->val_out = (adapter->hw.phy.id >> 16);
4789                         break;
4790                 case MII_PHYSID2:
4791                         data->val_out = (adapter->hw.phy.id & 0xFFFF);
4792                         break;
4793                 case MII_ADVERTISE:
4794                         data->val_out = adapter->phy_regs.advertise;
4795                         break;
4796                 case MII_LPA:
4797                         data->val_out = adapter->phy_regs.lpa;
4798                         break;
4799                 case MII_EXPANSION:
4800                         data->val_out = adapter->phy_regs.expansion;
4801                         break;
4802                 case MII_CTRL1000:
4803                         data->val_out = adapter->phy_regs.ctrl1000;
4804                         break;
4805                 case MII_STAT1000:
4806                         data->val_out = adapter->phy_regs.stat1000;
4807                         break;
4808                 case MII_ESTATUS:
4809                         data->val_out = adapter->phy_regs.estatus;
4810                         break;
4811                 default:
4812                         return -EIO;
4813                 }
4814                 break;
4815         case SIOCSMIIREG:
4816         default:
4817                 return -EOPNOTSUPP;
4818         }
4819         return 0;
4820 }
4821
4822 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4823 {
4824         switch (cmd) {
4825         case SIOCGMIIPHY:
4826         case SIOCGMIIREG:
4827         case SIOCSMIIREG:
4828                 return e1000_mii_ioctl(netdev, ifr, cmd);
4829         default:
4830                 return -EOPNOTSUPP;
4831         }
4832 }
4833
4834 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
4835 {
4836         struct e1000_hw *hw = &adapter->hw;
4837         u32 i, mac_reg;
4838         u16 phy_reg;
4839         int retval = 0;
4840
4841         /* copy MAC RARs to PHY RARs */
4842         for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
4843                 mac_reg = er32(RAL(i));
4844                 e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
4845                 e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
4846                 mac_reg = er32(RAH(i));
4847                 e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
4848                 e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
4849         }
4850
4851         /* copy MAC MTA to PHY MTA */
4852         for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
4853                 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
4854                 e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
4855                 e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
4856         }
4857
4858         /* configure PHY Rx Control register */
4859         e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
4860         mac_reg = er32(RCTL);
4861         if (mac_reg & E1000_RCTL_UPE)
4862                 phy_reg |= BM_RCTL_UPE;
4863         if (mac_reg & E1000_RCTL_MPE)
4864                 phy_reg |= BM_RCTL_MPE;
4865         phy_reg &= ~(BM_RCTL_MO_MASK);
4866         if (mac_reg & E1000_RCTL_MO_3)
4867                 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
4868                                 << BM_RCTL_MO_SHIFT);
4869         if (mac_reg & E1000_RCTL_BAM)
4870                 phy_reg |= BM_RCTL_BAM;
4871         if (mac_reg & E1000_RCTL_PMCF)
4872                 phy_reg |= BM_RCTL_PMCF;
4873         mac_reg = er32(CTRL);
4874         if (mac_reg & E1000_CTRL_RFCE)
4875                 phy_reg |= BM_RCTL_RFCE;
4876         e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
4877
4878         /* enable PHY wakeup in MAC register */
4879         ew32(WUFC, wufc);
4880         ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
4881
4882         /* configure and enable PHY wakeup in PHY registers */
4883         e1e_wphy(&adapter->hw, BM_WUFC, wufc);
4884         e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
4885
4886         /* activate PHY wakeup */
4887         retval = hw->phy.ops.acquire(hw);
4888         if (retval) {
4889                 e_err("Could not acquire PHY\n");
4890                 return retval;
4891         }
4892         e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4893                                  (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
4894         retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
4895         if (retval) {
4896                 e_err("Could not read PHY page 769\n");
4897                 goto out;
4898         }
4899         phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
4900         retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
4901         if (retval)
4902                 e_err("Could not set PHY Host Wakeup bit\n");
4903 out:
4904         hw->phy.ops.release(hw);
4905
4906         return retval;
4907 }
4908
4909 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
4910                             bool runtime)
4911 {
4912         struct net_device *netdev = pci_get_drvdata(pdev);
4913         struct e1000_adapter *adapter = netdev_priv(netdev);
4914         struct e1000_hw *hw = &adapter->hw;
4915         u32 ctrl, ctrl_ext, rctl, status;
4916         /* Runtime suspend should only enable wakeup for link changes */
4917         u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
4918         int retval = 0;
4919
4920         netif_device_detach(netdev);
4921
4922         if (netif_running(netdev)) {
4923                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4924                 e1000e_down(adapter);
4925                 e1000_free_irq(adapter);
4926         }
4927         e1000e_reset_interrupt_capability(adapter);
4928
4929         retval = pci_save_state(pdev);
4930         if (retval)
4931                 return retval;
4932
4933         status = er32(STATUS);
4934         if (status & E1000_STATUS_LU)
4935                 wufc &= ~E1000_WUFC_LNKC;
4936
4937         if (wufc) {
4938                 e1000_setup_rctl(adapter);
4939                 e1000_set_multi(netdev);
4940
4941                 /* turn on all-multi mode if wake on multicast is enabled */
4942                 if (wufc & E1000_WUFC_MC) {
4943                         rctl = er32(RCTL);
4944                         rctl |= E1000_RCTL_MPE;
4945                         ew32(RCTL, rctl);
4946                 }
4947
4948                 ctrl = er32(CTRL);
4949                 /* advertise wake from D3Cold */
4950                 #define E1000_CTRL_ADVD3WUC 0x00100000
4951                 /* phy power management enable */
4952                 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4953                 ctrl |= E1000_CTRL_ADVD3WUC;
4954                 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
4955                         ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
4956                 ew32(CTRL, ctrl);
4957
4958                 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
4959                     adapter->hw.phy.media_type ==
4960                     e1000_media_type_internal_serdes) {
4961                         /* keep the laser running in D3 */
4962                         ctrl_ext = er32(CTRL_EXT);
4963                         ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
4964                         ew32(CTRL_EXT, ctrl_ext);
4965                 }
4966
4967                 if (adapter->flags & FLAG_IS_ICH)
4968                         e1000e_disable_gig_wol_ich8lan(&adapter->hw);
4969
4970                 /* Allow time for pending master requests to run */
4971                 e1000e_disable_pcie_master(&adapter->hw);
4972
4973                 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4974                         /* enable wakeup by the PHY */
4975                         retval = e1000_init_phy_wakeup(adapter, wufc);
4976                         if (retval)
4977                                 return retval;
4978                 } else {
4979                         /* enable wakeup by the MAC */
4980                         ew32(WUFC, wufc);
4981                         ew32(WUC, E1000_WUC_PME_EN);
4982                 }
4983         } else {
4984                 ew32(WUC, 0);
4985                 ew32(WUFC, 0);
4986         }
4987
4988         *enable_wake = !!wufc;
4989
4990         /* make sure adapter isn't asleep if manageability is enabled */
4991         if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
4992             (hw->mac.ops.check_mng_mode(hw)))
4993                 *enable_wake = true;
4994
4995         if (adapter->hw.phy.type == e1000_phy_igp_3)
4996                 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
4997
4998         /*
4999          * Release control of h/w to f/w.  If f/w is AMT enabled, this
5000          * would have already happened in close and is redundant.
5001          */
5002         e1000_release_hw_control(adapter);
5003
5004         pci_disable_device(pdev);
5005
5006         return 0;
5007 }
5008
5009 static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
5010 {
5011         if (sleep && wake) {
5012                 pci_prepare_to_sleep(pdev);
5013                 return;
5014         }
5015
5016         pci_wake_from_d3(pdev, wake);
5017         pci_set_power_state(pdev, PCI_D3hot);
5018 }
5019
5020 static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
5021                                     bool wake)
5022 {
5023         struct net_device *netdev = pci_get_drvdata(pdev);
5024         struct e1000_adapter *adapter = netdev_priv(netdev);
5025
5026         /*
5027          * The pci-e switch on some quad port adapters will report a
5028          * correctable error when the MAC transitions from D0 to D3.  To
5029          * prevent this we need to mask off the correctable errors on the
5030          * downstream port of the pci-e switch.
5031          */
5032         if (adapter->flags & FLAG_IS_QUAD_PORT) {
5033                 struct pci_dev *us_dev = pdev->bus->self;
5034                 int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
5035                 u16 devctl;
5036
5037                 pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
5038                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
5039                                       (devctl & ~PCI_EXP_DEVCTL_CERE));
5040
5041                 e1000_power_off(pdev, sleep, wake);
5042
5043                 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
5044         } else {
5045                 e1000_power_off(pdev, sleep, wake);
5046         }
5047 }
5048
5049 #ifdef CONFIG_PCIEASPM
5050 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5051 {
5052         pci_disable_link_state(pdev, state);
5053 }
5054 #else
5055 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5056 {
5057         int pos;
5058         u16 reg16;
5059
5060         /*
5061          * Both device and parent should have the same ASPM setting.
5062          * Disable ASPM in downstream component first and then upstream.
5063          */
5064         pos = pci_pcie_cap(pdev);
5065         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
5066         reg16 &= ~state;
5067         pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
5068
5069         if (!pdev->bus->self)
5070                 return;
5071
5072         pos = pci_pcie_cap(pdev->bus->self);
5073         pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
5074         reg16 &= ~state;
5075         pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
5076 }
5077 #endif
5078 void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5079 {
5080         dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
5081                  (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
5082                  (state & PCIE_LINK_STATE_L1) ? "L1" : "");
5083
5084         __e1000e_disable_aspm(pdev, state);
5085 }
5086
5087 #ifdef CONFIG_PM_OPS
5088 static bool e1000e_pm_ready(struct e1000_adapter *adapter)
5089 {
5090         return !!adapter->tx_ring->buffer_info;
5091 }
5092
5093 static int __e1000_resume(struct pci_dev *pdev)
5094 {
5095         struct net_device *netdev = pci_get_drvdata(pdev);
5096         struct e1000_adapter *adapter = netdev_priv(netdev);
5097         struct e1000_hw *hw = &adapter->hw;
5098         u32 err;
5099
5100         pci_set_power_state(pdev, PCI_D0);
5101         pci_restore_state(pdev);
5102         pci_save_state(pdev);
5103         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5104                 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5105
5106         e1000e_set_interrupt_capability(adapter);
5107         if (netif_running(netdev)) {
5108                 err = e1000_request_irq(adapter);
5109                 if (err)
5110                         return err;
5111         }
5112
5113         e1000e_power_up_phy(adapter);
5114
5115         /* report the system wakeup cause from S3/S4 */
5116         if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
5117                 u16 phy_data;
5118
5119                 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
5120                 if (phy_data) {
5121                         e_info("PHY Wakeup cause - %s\n",
5122                                 phy_data & E1000_WUS_EX ? "Unicast Packet" :
5123                                 phy_data & E1000_WUS_MC ? "Multicast Packet" :
5124                                 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
5125                                 phy_data & E1000_WUS_MAG ? "Magic Packet" :
5126                                 phy_data & E1000_WUS_LNKC ? "Link Status "
5127                                 " Change" : "other");
5128                 }
5129                 e1e_wphy(&adapter->hw, BM_WUS, ~0);
5130         } else {
5131                 u32 wus = er32(WUS);
5132                 if (wus) {
5133                         e_info("MAC Wakeup cause - %s\n",
5134                                 wus & E1000_WUS_EX ? "Unicast Packet" :
5135                                 wus & E1000_WUS_MC ? "Multicast Packet" :
5136                                 wus & E1000_WUS_BC ? "Broadcast Packet" :
5137                                 wus & E1000_WUS_MAG ? "Magic Packet" :
5138                                 wus & E1000_WUS_LNKC ? "Link Status Change" :
5139                                 "other");
5140                 }
5141                 ew32(WUS, ~0);
5142         }
5143
5144         e1000e_reset(adapter);
5145
5146         e1000_init_manageability_pt(adapter);
5147
5148         if (netif_running(netdev))
5149                 e1000e_up(adapter);
5150
5151         netif_device_attach(netdev);
5152
5153         /*
5154          * If the controller has AMT, do not set DRV_LOAD until the interface
5155          * is up.  For all other cases, let the f/w know that the h/w is now
5156          * under the control of the driver.
5157          */
5158         if (!(adapter->flags & FLAG_HAS_AMT))
5159                 e1000_get_hw_control(adapter);
5160
5161         return 0;
5162 }
5163
5164 #ifdef CONFIG_PM_SLEEP
5165 static int e1000_suspend(struct device *dev)
5166 {
5167         struct pci_dev *pdev = to_pci_dev(dev);
5168         int retval;
5169         bool wake;
5170
5171         retval = __e1000_shutdown(pdev, &wake, false);
5172         if (!retval)
5173                 e1000_complete_shutdown(pdev, true, wake);
5174
5175         return retval;
5176 }
5177
5178 static int e1000_resume(struct device *dev)
5179 {
5180         struct pci_dev *pdev = to_pci_dev(dev);
5181         struct net_device *netdev = pci_get_drvdata(pdev);
5182         struct e1000_adapter *adapter = netdev_priv(netdev);
5183
5184         if (e1000e_pm_ready(adapter))
5185                 adapter->idle_check = true;
5186
5187         return __e1000_resume(pdev);
5188 }
5189 #endif /* CONFIG_PM_SLEEP */
5190
5191 #ifdef CONFIG_PM_RUNTIME
5192 static int e1000_runtime_suspend(struct device *dev)
5193 {
5194         struct pci_dev *pdev = to_pci_dev(dev);
5195         struct net_device *netdev = pci_get_drvdata(pdev);
5196         struct e1000_adapter *adapter = netdev_priv(netdev);
5197
5198         if (e1000e_pm_ready(adapter)) {
5199                 bool wake;
5200
5201                 __e1000_shutdown(pdev, &wake, true);
5202         }
5203
5204         return 0;
5205 }
5206
5207 static int e1000_idle(struct device *dev)
5208 {
5209         struct pci_dev *pdev = to_pci_dev(dev);
5210         struct net_device *netdev = pci_get_drvdata(pdev);
5211         struct e1000_adapter *adapter = netdev_priv(netdev);
5212
5213         if (!e1000e_pm_ready(adapter))
5214                 return 0;
5215
5216         if (adapter->idle_check) {
5217                 adapter->idle_check = false;
5218                 if (!e1000e_has_link(adapter))
5219                         pm_schedule_suspend(dev, MSEC_PER_SEC);
5220         }
5221
5222         return -EBUSY;
5223 }
5224
5225 static int e1000_runtime_resume(struct device *dev)
5226 {
5227         struct pci_dev *pdev = to_pci_dev(dev);
5228         struct net_device *netdev = pci_get_drvdata(pdev);
5229         struct e1000_adapter *adapter = netdev_priv(netdev);
5230
5231         if (!e1000e_pm_ready(adapter))
5232                 return 0;
5233
5234         adapter->idle_check = !dev->power.runtime_auto;
5235         return __e1000_resume(pdev);
5236 }
5237 #endif /* CONFIG_PM_RUNTIME */
5238 #endif /* CONFIG_PM_OPS */
5239
5240 static void e1000_shutdown(struct pci_dev *pdev)
5241 {
5242         bool wake = false;
5243
5244         __e1000_shutdown(pdev, &wake, false);
5245
5246         if (system_state == SYSTEM_POWER_OFF)
5247                 e1000_complete_shutdown(pdev, false, wake);
5248 }
5249
5250 #ifdef CONFIG_NET_POLL_CONTROLLER
5251 /*
5252  * Polling 'interrupt' - used by things like netconsole to send skbs
5253  * without having to re-enable interrupts. It's not called while
5254  * the interrupt routine is executing.
5255  */
5256 static void e1000_netpoll(struct net_device *netdev)
5257 {
5258         struct e1000_adapter *adapter = netdev_priv(netdev);
5259
5260         disable_irq(adapter->pdev->irq);
5261         e1000_intr(adapter->pdev->irq, netdev);
5262
5263         enable_irq(adapter->pdev->irq);
5264 }
5265 #endif
5266
5267 /**
5268  * e1000_io_error_detected - called when PCI error is detected
5269  * @pdev: Pointer to PCI device
5270  * @state: The current pci connection state
5271  *
5272  * This function is called after a PCI bus error affecting
5273  * this device has been detected.
5274  */
5275 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
5276                                                 pci_channel_state_t state)
5277 {
5278         struct net_device *netdev = pci_get_drvdata(pdev);
5279         struct e1000_adapter *adapter = netdev_priv(netdev);
5280
5281         netif_device_detach(netdev);
5282
5283         if (state == pci_channel_io_perm_failure)
5284                 return PCI_ERS_RESULT_DISCONNECT;
5285
5286         if (netif_running(netdev))
5287                 e1000e_down(adapter);
5288         pci_disable_device(pdev);
5289
5290         /* Request a slot slot reset. */
5291         return PCI_ERS_RESULT_NEED_RESET;
5292 }
5293
5294 /**
5295  * e1000_io_slot_reset - called after the pci bus has been reset.
5296  * @pdev: Pointer to PCI device
5297  *
5298  * Restart the card from scratch, as if from a cold-boot. Implementation
5299  * resembles the first-half of the e1000_resume routine.
5300  */
5301 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5302 {
5303         struct net_device *netdev = pci_get_drvdata(pdev);
5304         struct e1000_adapter *adapter = netdev_priv(netdev);
5305         struct e1000_hw *hw = &adapter->hw;
5306         int err;
5307         pci_ers_result_t result;
5308
5309         if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5310                 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5311         err = pci_enable_device_mem(pdev);
5312         if (err) {
5313                 dev_err(&pdev->dev,
5314                         "Cannot re-enable PCI device after reset.\n");
5315                 result = PCI_ERS_RESULT_DISCONNECT;
5316         } else {
5317                 pci_set_master(pdev);
5318                 pdev->state_saved = true;
5319                 pci_restore_state(pdev);
5320
5321                 pci_enable_wake(pdev, PCI_D3hot, 0);
5322                 pci_enable_wake(pdev, PCI_D3cold, 0);
5323
5324                 e1000e_reset(adapter);
5325                 ew32(WUS, ~0);
5326                 result = PCI_ERS_RESULT_RECOVERED;
5327         }
5328
5329         pci_cleanup_aer_uncorrect_error_status(pdev);
5330
5331         return result;
5332 }
5333
5334 /**
5335  * e1000_io_resume - called when traffic can start flowing again.
5336  * @pdev: Pointer to PCI device
5337  *
5338  * This callback is called when the error recovery driver tells us that
5339  * its OK to resume normal operation. Implementation resembles the
5340  * second-half of the e1000_resume routine.
5341  */
5342 static void e1000_io_resume(struct pci_dev *pdev)
5343 {
5344         struct net_device *netdev = pci_get_drvdata(pdev);
5345         struct e1000_adapter *adapter = netdev_priv(netdev);
5346
5347         e1000_init_manageability_pt(adapter);
5348
5349         if (netif_running(netdev)) {
5350                 if (e1000e_up(adapter)) {
5351                         dev_err(&pdev->dev,
5352                                 "can't bring device back up after reset\n");
5353                         return;
5354                 }
5355         }
5356
5357         netif_device_attach(netdev);
5358
5359         /*
5360          * If the controller has AMT, do not set DRV_LOAD until the interface
5361          * is up.  For all other cases, let the f/w know that the h/w is now
5362          * under the control of the driver.
5363          */
5364         if (!(adapter->flags & FLAG_HAS_AMT))
5365                 e1000_get_hw_control(adapter);
5366
5367 }
5368
5369 static void e1000_print_device_info(struct e1000_adapter *adapter)
5370 {
5371         struct e1000_hw *hw = &adapter->hw;
5372         struct net_device *netdev = adapter->netdev;
5373         u32 pba_num;
5374
5375         /* print bus type/speed/width info */
5376         e_info("(PCI Express:2.5GB/s:%s) %pM\n",
5377                /* bus width */
5378                ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
5379                 "Width x1"),
5380                /* MAC address */
5381                netdev->dev_addr);
5382         e_info("Intel(R) PRO/%s Network Connection\n",
5383                (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
5384         e1000e_read_pba_num(hw, &pba_num);
5385         e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
5386                hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
5387 }
5388
5389 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
5390 {
5391         struct e1000_hw *hw = &adapter->hw;
5392         int ret_val;
5393         u16 buf = 0;
5394
5395         if (hw->mac.type != e1000_82573)
5396                 return;
5397
5398         ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
5399         if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
5400                 /* Deep Smart Power Down (DSPD) */
5401                 dev_warn(&adapter->pdev->dev,
5402                          "Warning: detected DSPD enabled in EEPROM\n");
5403         }
5404 }
5405
5406 static const struct net_device_ops e1000e_netdev_ops = {
5407         .ndo_open               = e1000_open,
5408         .ndo_stop               = e1000_close,
5409         .ndo_start_xmit         = e1000_xmit_frame,
5410         .ndo_get_stats          = e1000_get_stats,
5411         .ndo_set_multicast_list = e1000_set_multi,
5412         .ndo_set_mac_address    = e1000_set_mac,
5413         .ndo_change_mtu         = e1000_change_mtu,
5414         .ndo_do_ioctl           = e1000_ioctl,
5415         .ndo_tx_timeout         = e1000_tx_timeout,
5416         .ndo_validate_addr      = eth_validate_addr,
5417
5418         .ndo_vlan_rx_register   = e1000_vlan_rx_register,
5419         .ndo_vlan_rx_add_vid    = e1000_vlan_rx_add_vid,
5420         .ndo_vlan_rx_kill_vid   = e1000_vlan_rx_kill_vid,
5421 #ifdef CONFIG_NET_POLL_CONTROLLER
5422         .ndo_poll_controller    = e1000_netpoll,
5423 #endif
5424 };
5425
5426 /**
5427  * e1000_probe - Device Initialization Routine
5428  * @pdev: PCI device information struct
5429  * @ent: entry in e1000_pci_tbl
5430  *
5431  * Returns 0 on success, negative on failure
5432  *
5433  * e1000_probe initializes an adapter identified by a pci_dev structure.
5434  * The OS initialization, configuring of the adapter private structure,
5435  * and a hardware reset occur.
5436  **/
5437 static int __devinit e1000_probe(struct pci_dev *pdev,
5438                                  const struct pci_device_id *ent)
5439 {
5440         struct net_device *netdev;
5441         struct e1000_adapter *adapter;
5442         struct e1000_hw *hw;
5443         const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
5444         resource_size_t mmio_start, mmio_len;
5445         resource_size_t flash_start, flash_len;
5446
5447         static int cards_found;
5448         int i, err, pci_using_dac;
5449         u16 eeprom_data = 0;
5450         u16 eeprom_apme_mask = E1000_EEPROM_APME;
5451
5452         if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
5453                 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5454
5455         err = pci_enable_device_mem(pdev);
5456         if (err)
5457                 return err;
5458
5459         pci_using_dac = 0;
5460         err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
5461         if (!err) {
5462                 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
5463                 if (!err)
5464                         pci_using_dac = 1;
5465         } else {
5466                 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
5467                 if (err) {
5468                         err = dma_set_coherent_mask(&pdev->dev,
5469                                                     DMA_BIT_MASK(32));
5470                         if (err) {
5471                                 dev_err(&pdev->dev, "No usable DMA "
5472                                         "configuration, aborting\n");
5473                                 goto err_dma;
5474                         }
5475                 }
5476         }
5477
5478         err = pci_request_selected_regions_exclusive(pdev,
5479                                           pci_select_bars(pdev, IORESOURCE_MEM),
5480                                           e1000e_driver_name);
5481         if (err)
5482                 goto err_pci_reg;
5483
5484         /* AER (Advanced Error Reporting) hooks */
5485         pci_enable_pcie_error_reporting(pdev);
5486
5487         pci_set_master(pdev);
5488         /* PCI config space info */
5489         err = pci_save_state(pdev);
5490         if (err)
5491                 goto err_alloc_etherdev;
5492
5493         err = -ENOMEM;
5494         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
5495         if (!netdev)
5496                 goto err_alloc_etherdev;
5497
5498         SET_NETDEV_DEV(netdev, &pdev->dev);
5499
5500         netdev->irq = pdev->irq;
5501
5502         pci_set_drvdata(pdev, netdev);
5503         adapter = netdev_priv(netdev);
5504         hw = &adapter->hw;
5505         adapter->netdev = netdev;
5506         adapter->pdev = pdev;
5507         adapter->ei = ei;
5508         adapter->pba = ei->pba;
5509         adapter->flags = ei->flags;
5510         adapter->flags2 = ei->flags2;
5511         adapter->hw.adapter = adapter;
5512         adapter->hw.mac.type = ei->mac;
5513         adapter->max_hw_frame_size = ei->max_hw_frame_size;
5514         adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
5515
5516         mmio_start = pci_resource_start(pdev, 0);
5517         mmio_len = pci_resource_len(pdev, 0);
5518
5519         err = -EIO;
5520         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
5521         if (!adapter->hw.hw_addr)
5522                 goto err_ioremap;
5523
5524         if ((adapter->flags & FLAG_HAS_FLASH) &&
5525             (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
5526                 flash_start = pci_resource_start(pdev, 1);
5527                 flash_len = pci_resource_len(pdev, 1);
5528                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
5529                 if (!adapter->hw.flash_address)
5530                         goto err_flashmap;
5531         }
5532
5533         /* construct the net_device struct */
5534         netdev->netdev_ops              = &e1000e_netdev_ops;
5535         e1000e_set_ethtool_ops(netdev);
5536         netdev->watchdog_timeo          = 5 * HZ;
5537         netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
5538         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
5539
5540         netdev->mem_start = mmio_start;
5541         netdev->mem_end = mmio_start + mmio_len;
5542
5543         adapter->bd_number = cards_found++;
5544
5545         e1000e_check_options(adapter);
5546
5547         /* setup adapter struct */
5548         err = e1000_sw_init(adapter);
5549         if (err)
5550                 goto err_sw_init;
5551
5552         err = -EIO;
5553
5554         memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
5555         memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
5556         memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
5557
5558         err = ei->get_variants(adapter);
5559         if (err)
5560                 goto err_hw_init;
5561
5562         if ((adapter->flags & FLAG_IS_ICH) &&
5563             (adapter->flags & FLAG_READ_ONLY_NVM))
5564                 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
5565
5566         hw->mac.ops.get_bus_info(&adapter->hw);
5567
5568         adapter->hw.phy.autoneg_wait_to_complete = 0;
5569
5570         /* Copper options */
5571         if (adapter->hw.phy.media_type == e1000_media_type_copper) {
5572                 adapter->hw.phy.mdix = AUTO_ALL_MODES;
5573                 adapter->hw.phy.disable_polarity_correction = 0;
5574                 adapter->hw.phy.ms_type = e1000_ms_hw_default;
5575         }
5576
5577         if (e1000_check_reset_block(&adapter->hw))
5578                 e_info("PHY reset is blocked due to SOL/IDER session.\n");
5579
5580         netdev->features = NETIF_F_SG |
5581                            NETIF_F_HW_CSUM |
5582                            NETIF_F_HW_VLAN_TX |
5583                            NETIF_F_HW_VLAN_RX;
5584
5585         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
5586                 netdev->features |= NETIF_F_HW_VLAN_FILTER;
5587
5588         netdev->features |= NETIF_F_TSO;
5589         netdev->features |= NETIF_F_TSO6;
5590
5591         netdev->vlan_features |= NETIF_F_TSO;
5592         netdev->vlan_features |= NETIF_F_TSO6;
5593         netdev->vlan_features |= NETIF_F_HW_CSUM;
5594         netdev->vlan_features |= NETIF_F_SG;
5595
5596         if (pci_using_dac)
5597                 netdev->features |= NETIF_F_HIGHDMA;
5598
5599         if (e1000e_enable_mng_pass_thru(&adapter->hw))
5600                 adapter->flags |= FLAG_MNG_PT_ENABLED;
5601
5602         /*
5603          * before reading the NVM, reset the controller to
5604          * put the device in a known good starting state
5605          */
5606         adapter->hw.mac.ops.reset_hw(&adapter->hw);
5607
5608         /*
5609          * systems with ASPM and others may see the checksum fail on the first
5610          * attempt. Let's give it a few tries
5611          */
5612         for (i = 0;; i++) {
5613                 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
5614                         break;
5615                 if (i == 2) {
5616                         e_err("The NVM Checksum Is Not Valid\n");
5617                         err = -EIO;
5618                         goto err_eeprom;
5619                 }
5620         }
5621
5622         e1000_eeprom_checks(adapter);
5623
5624         /* copy the MAC address */
5625         if (e1000e_read_mac_addr(&adapter->hw))
5626                 e_err("NVM Read Error while reading MAC address\n");
5627
5628         memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
5629         memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
5630
5631         if (!is_valid_ether_addr(netdev->perm_addr)) {
5632                 e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
5633                 err = -EIO;
5634                 goto err_eeprom;
5635         }
5636
5637         init_timer(&adapter->watchdog_timer);
5638         adapter->watchdog_timer.function = &e1000_watchdog;
5639         adapter->watchdog_timer.data = (unsigned long) adapter;
5640
5641         init_timer(&adapter->phy_info_timer);
5642         adapter->phy_info_timer.function = &e1000_update_phy_info;
5643         adapter->phy_info_timer.data = (unsigned long) adapter;
5644
5645         INIT_WORK(&adapter->reset_task, e1000_reset_task);
5646         INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
5647         INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
5648         INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
5649         INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
5650
5651         /* Initialize link parameters. User can change them with ethtool */
5652         adapter->hw.mac.autoneg = 1;
5653         adapter->fc_autoneg = 1;
5654         adapter->hw.fc.requested_mode = e1000_fc_default;
5655         adapter->hw.fc.current_mode = e1000_fc_default;
5656         adapter->hw.phy.autoneg_advertised = 0x2f;
5657
5658         /* ring size defaults */
5659         adapter->rx_ring->count = 256;
5660         adapter->tx_ring->count = 256;
5661
5662         /*
5663          * Initial Wake on LAN setting - If APM wake is enabled in
5664          * the EEPROM, enable the ACPI Magic Packet filter
5665          */
5666         if (adapter->flags & FLAG_APME_IN_WUC) {
5667                 /* APME bit in EEPROM is mapped to WUC.APME */
5668                 eeprom_data = er32(WUC);
5669                 eeprom_apme_mask = E1000_WUC_APME;
5670                 if (eeprom_data & E1000_WUC_PHY_WAKE)
5671                         adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
5672         } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
5673                 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
5674                     (adapter->hw.bus.func == 1))
5675                         e1000_read_nvm(&adapter->hw,
5676                                 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
5677                 else
5678                         e1000_read_nvm(&adapter->hw,
5679                                 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
5680         }
5681
5682         /* fetch WoL from EEPROM */
5683         if (eeprom_data & eeprom_apme_mask)
5684                 adapter->eeprom_wol |= E1000_WUFC_MAG;
5685
5686         /*
5687          * now that we have the eeprom settings, apply the special cases
5688          * where the eeprom may be wrong or the board simply won't support
5689          * wake on lan on a particular port
5690          */
5691         if (!(adapter->flags & FLAG_HAS_WOL))
5692                 adapter->eeprom_wol = 0;
5693
5694         /* initialize the wol settings based on the eeprom settings */
5695         adapter->wol = adapter->eeprom_wol;
5696         device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
5697
5698         /* save off EEPROM version number */
5699         e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
5700
5701         /* reset the hardware with the new settings */
5702         e1000e_reset(adapter);
5703
5704         /*
5705          * If the controller has AMT, do not set DRV_LOAD until the interface
5706          * is up.  For all other cases, let the f/w know that the h/w is now
5707          * under the control of the driver.
5708          */
5709         if (!(adapter->flags & FLAG_HAS_AMT))
5710                 e1000_get_hw_control(adapter);
5711
5712         strcpy(netdev->name, "eth%d");
5713         err = register_netdev(netdev);
5714         if (err)
5715                 goto err_register;
5716
5717         /* carrier off reporting is important to ethtool even BEFORE open */
5718         netif_carrier_off(netdev);
5719
5720         e1000_print_device_info(adapter);
5721
5722         if (pci_dev_run_wake(pdev)) {
5723                 pm_runtime_set_active(&pdev->dev);
5724                 pm_runtime_enable(&pdev->dev);
5725         }
5726         pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC);
5727
5728         return 0;
5729
5730 err_register:
5731         if (!(adapter->flags & FLAG_HAS_AMT))
5732                 e1000_release_hw_control(adapter);
5733 err_eeprom:
5734         if (!e1000_check_reset_block(&adapter->hw))
5735                 e1000_phy_hw_reset(&adapter->hw);
5736 err_hw_init:
5737
5738         kfree(adapter->tx_ring);
5739         kfree(adapter->rx_ring);
5740 err_sw_init:
5741         if (adapter->hw.flash_address)
5742                 iounmap(adapter->hw.flash_address);
5743         e1000e_reset_interrupt_capability(adapter);
5744 err_flashmap:
5745         iounmap(adapter->hw.hw_addr);
5746 err_ioremap:
5747         free_netdev(netdev);
5748 err_alloc_etherdev:
5749         pci_release_selected_regions(pdev,
5750                                      pci_select_bars(pdev, IORESOURCE_MEM));
5751 err_pci_reg:
5752 err_dma:
5753         pci_disable_device(pdev);
5754         return err;
5755 }
5756
5757 /**
5758  * e1000_remove - Device Removal Routine
5759  * @pdev: PCI device information struct
5760  *
5761  * e1000_remove is called by the PCI subsystem to alert the driver
5762  * that it should release a PCI device.  The could be caused by a
5763  * Hot-Plug event, or because the driver is going to be removed from
5764  * memory.
5765  **/
5766 static void __devexit e1000_remove(struct pci_dev *pdev)
5767 {
5768         struct net_device *netdev = pci_get_drvdata(pdev);
5769         struct e1000_adapter *adapter = netdev_priv(netdev);
5770         bool down = test_bit(__E1000_DOWN, &adapter->state);
5771
5772         pm_runtime_get_sync(&pdev->dev);
5773
5774         /*
5775          * flush_scheduled work may reschedule our watchdog task, so
5776          * explicitly disable watchdog tasks from being rescheduled
5777          */
5778         if (!down)
5779                 set_bit(__E1000_DOWN, &adapter->state);
5780         del_timer_sync(&adapter->watchdog_timer);
5781         del_timer_sync(&adapter->phy_info_timer);
5782
5783         cancel_work_sync(&adapter->reset_task);
5784         cancel_work_sync(&adapter->watchdog_task);
5785         cancel_work_sync(&adapter->downshift_task);
5786         cancel_work_sync(&adapter->update_phy_task);
5787         cancel_work_sync(&adapter->print_hang_task);
5788         flush_scheduled_work();
5789
5790         if (!(netdev->flags & IFF_UP))
5791                 e1000_power_down_phy(adapter);
5792
5793         /* Don't lie to e1000_close() down the road. */
5794         if (!down)
5795                 clear_bit(__E1000_DOWN, &adapter->state);
5796         unregister_netdev(netdev);
5797
5798         if (pci_dev_run_wake(pdev)) {
5799                 pm_runtime_disable(&pdev->dev);
5800                 pm_runtime_set_suspended(&pdev->dev);
5801         }
5802         pm_runtime_put_noidle(&pdev->dev);
5803
5804         /*
5805          * Release control of h/w to f/w.  If f/w is AMT enabled, this
5806          * would have already happened in close and is redundant.
5807          */
5808         e1000_release_hw_control(adapter);
5809
5810         e1000e_reset_interrupt_capability(adapter);
5811         kfree(adapter->tx_ring);
5812         kfree(adapter->rx_ring);
5813
5814         iounmap(adapter->hw.hw_addr);
5815         if (adapter->hw.flash_address)
5816                 iounmap(adapter->hw.flash_address);
5817         pci_release_selected_regions(pdev,
5818                                      pci_select_bars(pdev, IORESOURCE_MEM));
5819
5820         free_netdev(netdev);
5821
5822         /* AER disable */
5823         pci_disable_pcie_error_reporting(pdev);
5824
5825         pci_disable_device(pdev);
5826 }
5827
5828 /* PCI Error Recovery (ERS) */
5829 static struct pci_error_handlers e1000_err_handler = {
5830         .error_detected = e1000_io_error_detected,
5831         .slot_reset = e1000_io_slot_reset,
5832         .resume = e1000_io_resume,
5833 };
5834
5835 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
5836         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
5837         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
5838         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
5839         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
5840         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
5841         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
5842         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
5843         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
5844         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
5845
5846         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
5847         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
5848         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
5849         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
5850
5851         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
5852         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
5853         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
5854
5855         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
5856         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
5857         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
5858
5859         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
5860           board_80003es2lan },
5861         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
5862           board_80003es2lan },
5863         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
5864           board_80003es2lan },
5865         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
5866           board_80003es2lan },
5867
5868         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
5869         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
5870         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
5871         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
5872         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
5873         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
5874         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
5875         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
5876
5877         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
5878         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
5879         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
5880         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
5881         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
5882         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
5883         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
5884         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
5885         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
5886
5887         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
5888         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
5889         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
5890
5891         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
5892         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
5893         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
5894
5895         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
5896         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
5897         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
5898         { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
5899
5900         { }     /* terminate list */
5901 };
5902 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
5903
5904 #ifdef CONFIG_PM_OPS
5905 static const struct dev_pm_ops e1000_pm_ops = {
5906         SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
5907         SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
5908                                 e1000_runtime_resume, e1000_idle)
5909 };
5910 #endif
5911
5912 /* PCI Device API Driver */
5913 static struct pci_driver e1000_driver = {
5914         .name     = e1000e_driver_name,
5915         .id_table = e1000_pci_tbl,
5916         .probe    = e1000_probe,
5917         .remove   = __devexit_p(e1000_remove),
5918 #ifdef CONFIG_PM_OPS
5919         .driver.pm = &e1000_pm_ops,
5920 #endif
5921         .shutdown = e1000_shutdown,
5922         .err_handler = &e1000_err_handler
5923 };
5924
5925 /**
5926  * e1000_init_module - Driver Registration Routine
5927  *
5928  * e1000_init_module is the first routine called when the driver is
5929  * loaded. All it does is register with the PCI subsystem.
5930  **/
5931 static int __init e1000_init_module(void)
5932 {
5933         int ret;
5934         pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
5935                 e1000e_driver_version);
5936         pr_info("Copyright (c) 1999 - 2009 Intel Corporation.\n");
5937         ret = pci_register_driver(&e1000_driver);
5938
5939         return ret;
5940 }
5941 module_init(e1000_init_module);
5942
5943 /**
5944  * e1000_exit_module - Driver Exit Cleanup Routine
5945  *
5946  * e1000_exit_module is called just before the driver is removed
5947  * from memory.
5948  **/
5949 static void __exit e1000_exit_module(void)
5950 {
5951         pci_unregister_driver(&e1000_driver);
5952 }
5953 module_exit(e1000_exit_module);
5954
5955
5956 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
5957 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
5958 MODULE_LICENSE("GPL");
5959 MODULE_VERSION(DRV_VERSION);
5960
5961 /* e1000_main.c */