1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31 #include <linux/module.h>
32 #include <linux/types.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/pagemap.h>
37 #include <linux/delay.h>
38 #include <linux/netdevice.h>
39 #include <linux/tcp.h>
40 #include <linux/ipv6.h>
41 #include <linux/slab.h>
42 #include <net/checksum.h>
43 #include <net/ip6_checksum.h>
44 #include <linux/mii.h>
45 #include <linux/ethtool.h>
46 #include <linux/if_vlan.h>
47 #include <linux/cpu.h>
48 #include <linux/smp.h>
49 #include <linux/pm_qos_params.h>
50 #include <linux/pm_runtime.h>
51 #include <linux/aer.h>
55 #define DRV_VERSION "1.0.2-k4"
56 char e1000e_driver_name[] = "e1000e";
57 const char e1000e_driver_version[] = DRV_VERSION;
59 static const struct e1000_info *e1000_info_tbl[] = {
60 [board_82571] = &e1000_82571_info,
61 [board_82572] = &e1000_82572_info,
62 [board_82573] = &e1000_82573_info,
63 [board_82574] = &e1000_82574_info,
64 [board_82583] = &e1000_82583_info,
65 [board_80003es2lan] = &e1000_es2_info,
66 [board_ich8lan] = &e1000_ich8_info,
67 [board_ich9lan] = &e1000_ich9_info,
68 [board_ich10lan] = &e1000_ich10_info,
69 [board_pchlan] = &e1000_pch_info,
72 struct e1000_reg_info {
77 #define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */
78 #define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */
79 #define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */
80 #define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */
81 #define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */
83 #define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
84 #define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
85 #define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
86 #define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
87 #define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
89 static const struct e1000_reg_info e1000_reg_info_tbl[] = {
91 /* General Registers */
93 {E1000_STATUS, "STATUS"},
94 {E1000_CTRL_EXT, "CTRL_EXT"},
96 /* Interrupt Registers */
100 {E1000_RCTL, "RCTL"},
101 {E1000_RDLEN, "RDLEN"},
104 {E1000_RDTR, "RDTR"},
105 {E1000_RXDCTL(0), "RXDCTL"},
107 {E1000_RDBAL, "RDBAL"},
108 {E1000_RDBAH, "RDBAH"},
109 {E1000_RDFH, "RDFH"},
110 {E1000_RDFT, "RDFT"},
111 {E1000_RDFHS, "RDFHS"},
112 {E1000_RDFTS, "RDFTS"},
113 {E1000_RDFPC, "RDFPC"},
116 {E1000_TCTL, "TCTL"},
117 {E1000_TDBAL, "TDBAL"},
118 {E1000_TDBAH, "TDBAH"},
119 {E1000_TDLEN, "TDLEN"},
122 {E1000_TIDV, "TIDV"},
123 {E1000_TXDCTL(0), "TXDCTL"},
124 {E1000_TADV, "TADV"},
125 {E1000_TARC(0), "TARC"},
126 {E1000_TDFH, "TDFH"},
127 {E1000_TDFT, "TDFT"},
128 {E1000_TDFHS, "TDFHS"},
129 {E1000_TDFTS, "TDFTS"},
130 {E1000_TDFPC, "TDFPC"},
132 /* List Terminator */
137 * e1000_regdump - register printout routine
139 static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
145 switch (reginfo->ofs) {
146 case E1000_RXDCTL(0):
147 for (n = 0; n < 2; n++)
148 regs[n] = __er32(hw, E1000_RXDCTL(n));
150 case E1000_TXDCTL(0):
151 for (n = 0; n < 2; n++)
152 regs[n] = __er32(hw, E1000_TXDCTL(n));
155 for (n = 0; n < 2; n++)
156 regs[n] = __er32(hw, E1000_TARC(n));
159 printk(KERN_INFO "%-15s %08x\n",
160 reginfo->name, __er32(hw, reginfo->ofs));
164 snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
165 printk(KERN_INFO "%-15s ", rname);
166 for (n = 0; n < 2; n++)
167 printk(KERN_CONT "%08x ", regs[n]);
168 printk(KERN_CONT "\n");
173 * e1000e_dump - Print registers, tx-ring and rx-ring
175 static void e1000e_dump(struct e1000_adapter *adapter)
177 struct net_device *netdev = adapter->netdev;
178 struct e1000_hw *hw = &adapter->hw;
179 struct e1000_reg_info *reginfo;
180 struct e1000_ring *tx_ring = adapter->tx_ring;
181 struct e1000_tx_desc *tx_desc;
182 struct my_u0 { u64 a; u64 b; } *u0;
183 struct e1000_buffer *buffer_info;
184 struct e1000_ring *rx_ring = adapter->rx_ring;
185 union e1000_rx_desc_packet_split *rx_desc_ps;
186 struct e1000_rx_desc *rx_desc;
187 struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1;
191 if (!netif_msg_hw(adapter))
194 /* Print netdevice Info */
196 dev_info(&adapter->pdev->dev, "Net device Info\n");
197 printk(KERN_INFO "Device Name state "
198 "trans_start last_rx\n");
199 printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
206 /* Print Registers */
207 dev_info(&adapter->pdev->dev, "Register Dump\n");
208 printk(KERN_INFO " Register Name Value\n");
209 for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
210 reginfo->name; reginfo++) {
211 e1000_regdump(hw, reginfo);
214 /* Print TX Ring Summary */
215 if (!netdev || !netif_running(netdev))
218 dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
219 printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
220 " leng ntw timestamp\n");
221 buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
222 printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
223 0, tx_ring->next_to_use, tx_ring->next_to_clean,
224 (u64)buffer_info->dma,
226 buffer_info->next_to_watch,
227 (u64)buffer_info->time_stamp);
230 if (!netif_msg_tx_done(adapter))
231 goto rx_ring_summary;
233 dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
235 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
237 * Legacy Transmit Descriptor
238 * +--------------------------------------------------------------+
239 * 0 | Buffer Address [63:0] (Reserved on Write Back) |
240 * +--------------------------------------------------------------+
241 * 8 | Special | CSS | Status | CMD | CSO | Length |
242 * +--------------------------------------------------------------+
243 * 63 48 47 36 35 32 31 24 23 16 15 0
245 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
246 * 63 48 47 40 39 32 31 16 15 8 7 0
247 * +----------------------------------------------------------------+
248 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
249 * +----------------------------------------------------------------+
250 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
251 * +----------------------------------------------------------------+
252 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
254 * Extended Data Descriptor (DTYP=0x1)
255 * +----------------------------------------------------------------+
256 * 0 | Buffer Address [63:0] |
257 * +----------------------------------------------------------------+
258 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
259 * +----------------------------------------------------------------+
260 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
262 printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
263 " [bi->dma ] leng ntw timestamp bi->skb "
264 "<-- Legacy format\n");
265 printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
266 " [bi->dma ] leng ntw timestamp bi->skb "
267 "<-- Ext Context format\n");
268 printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
269 " [bi->dma ] leng ntw timestamp bi->skb "
270 "<-- Ext Data format\n");
271 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
272 tx_desc = E1000_TX_DESC(*tx_ring, i);
273 buffer_info = &tx_ring->buffer_info[i];
274 u0 = (struct my_u0 *)tx_desc;
275 printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
276 "%04X %3X %016llX %p",
277 (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' :
278 ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i,
279 le64_to_cpu(u0->a), le64_to_cpu(u0->b),
280 (u64)buffer_info->dma, buffer_info->length,
281 buffer_info->next_to_watch, (u64)buffer_info->time_stamp,
283 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
284 printk(KERN_CONT " NTC/U\n");
285 else if (i == tx_ring->next_to_use)
286 printk(KERN_CONT " NTU\n");
287 else if (i == tx_ring->next_to_clean)
288 printk(KERN_CONT " NTC\n");
290 printk(KERN_CONT "\n");
292 if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
293 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
294 16, 1, phys_to_virt(buffer_info->dma),
295 buffer_info->length, true);
298 /* Print RX Rings Summary */
300 dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
301 printk(KERN_INFO "Queue [NTU] [NTC]\n");
302 printk(KERN_INFO " %5d %5X %5X\n", 0,
303 rx_ring->next_to_use, rx_ring->next_to_clean);
306 if (!netif_msg_rx_status(adapter))
309 dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
310 switch (adapter->rx_ps_pages) {
314 /* [Extended] Packet Split Receive Descriptor Format
316 * +-----------------------------------------------------+
317 * 0 | Buffer Address 0 [63:0] |
318 * +-----------------------------------------------------+
319 * 8 | Buffer Address 1 [63:0] |
320 * +-----------------------------------------------------+
321 * 16 | Buffer Address 2 [63:0] |
322 * +-----------------------------------------------------+
323 * 24 | Buffer Address 3 [63:0] |
324 * +-----------------------------------------------------+
326 printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
328 "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
329 "[bi->skb] <-- Ext Pkt Split format\n");
330 /* [Extended] Receive Descriptor (Write-Back) Format
332 * 63 48 47 32 31 13 12 8 7 4 3 0
333 * +------------------------------------------------------+
334 * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS |
335 * | Checksum | Ident | | Queue | | Type |
336 * +------------------------------------------------------+
337 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
338 * +------------------------------------------------------+
339 * 63 48 47 32 31 20 19 0
341 printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
343 "[ l3 l2 l1 hs] [reserved ] ---------------- "
344 "[bi->skb] <-- Ext Rx Write-Back format\n");
345 for (i = 0; i < rx_ring->count; i++) {
346 buffer_info = &rx_ring->buffer_info[i];
347 rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
348 u1 = (struct my_u1 *)rx_desc_ps;
350 le32_to_cpu(rx_desc_ps->wb.middle.status_error);
351 if (staterr & E1000_RXD_STAT_DD) {
352 /* Descriptor Done */
353 printk(KERN_INFO "RWB[0x%03X] %016llX "
354 "%016llX %016llX %016llX "
355 "---------------- %p", i,
362 printk(KERN_INFO "R [0x%03X] %016llX "
363 "%016llX %016llX %016llX %016llX %p", i,
368 (u64)buffer_info->dma,
371 if (netif_msg_pktdata(adapter))
372 print_hex_dump(KERN_INFO, "",
373 DUMP_PREFIX_ADDRESS, 16, 1,
374 phys_to_virt(buffer_info->dma),
375 adapter->rx_ps_bsize0, true);
378 if (i == rx_ring->next_to_use)
379 printk(KERN_CONT " NTU\n");
380 else if (i == rx_ring->next_to_clean)
381 printk(KERN_CONT " NTC\n");
383 printk(KERN_CONT "\n");
388 /* Legacy Receive Descriptor Format
390 * +-----------------------------------------------------+
391 * | Buffer Address [63:0] |
392 * +-----------------------------------------------------+
393 * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
394 * +-----------------------------------------------------+
395 * 63 48 47 40 39 32 31 16 15 0
397 printk(KERN_INFO "Rl[desc] [address 63:0 ] "
398 "[vl er S cks ln] [bi->dma ] [bi->skb] "
399 "<-- Legacy format\n");
400 for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
401 rx_desc = E1000_RX_DESC(*rx_ring, i);
402 buffer_info = &rx_ring->buffer_info[i];
403 u0 = (struct my_u0 *)rx_desc;
404 printk(KERN_INFO "Rl[0x%03X] %016llX %016llX "
406 i, le64_to_cpu(u0->a), le64_to_cpu(u0->b),
407 (u64)buffer_info->dma, buffer_info->skb);
408 if (i == rx_ring->next_to_use)
409 printk(KERN_CONT " NTU\n");
410 else if (i == rx_ring->next_to_clean)
411 printk(KERN_CONT " NTC\n");
413 printk(KERN_CONT "\n");
415 if (netif_msg_pktdata(adapter))
416 print_hex_dump(KERN_INFO, "",
418 16, 1, phys_to_virt(buffer_info->dma),
419 adapter->rx_buffer_len, true);
428 * e1000_desc_unused - calculate if we have unused descriptors
430 static int e1000_desc_unused(struct e1000_ring *ring)
432 if (ring->next_to_clean > ring->next_to_use)
433 return ring->next_to_clean - ring->next_to_use - 1;
435 return ring->count + ring->next_to_clean - ring->next_to_use - 1;
439 * e1000_receive_skb - helper function to handle Rx indications
440 * @adapter: board private structure
441 * @status: descriptor status field as written by hardware
442 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
443 * @skb: pointer to sk_buff to be indicated to stack
445 static void e1000_receive_skb(struct e1000_adapter *adapter,
446 struct net_device *netdev,
448 u8 status, __le16 vlan)
450 skb->protocol = eth_type_trans(skb, netdev);
452 if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
453 vlan_gro_receive(&adapter->napi, adapter->vlgrp,
454 le16_to_cpu(vlan), skb);
456 napi_gro_receive(&adapter->napi, skb);
460 * e1000_rx_checksum - Receive Checksum Offload for 82543
461 * @adapter: board private structure
462 * @status_err: receive descriptor status and error fields
463 * @csum: receive descriptor csum field
464 * @sk_buff: socket buffer with received data
466 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
467 u32 csum, struct sk_buff *skb)
469 u16 status = (u16)status_err;
470 u8 errors = (u8)(status_err >> 24);
471 skb->ip_summed = CHECKSUM_NONE;
473 /* Ignore Checksum bit is set */
474 if (status & E1000_RXD_STAT_IXSM)
476 /* TCP/UDP checksum error bit is set */
477 if (errors & E1000_RXD_ERR_TCPE) {
478 /* let the stack verify checksum errors */
479 adapter->hw_csum_err++;
483 /* TCP/UDP Checksum has not been calculated */
484 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
487 /* It must be a TCP or UDP packet with a valid checksum */
488 if (status & E1000_RXD_STAT_TCPCS) {
489 /* TCP checksum is good */
490 skb->ip_summed = CHECKSUM_UNNECESSARY;
493 * IP fragment with UDP payload
494 * Hardware complements the payload checksum, so we undo it
495 * and then put the value in host order for further stack use.
497 __sum16 sum = (__force __sum16)htons(csum);
498 skb->csum = csum_unfold(~sum);
499 skb->ip_summed = CHECKSUM_COMPLETE;
501 adapter->hw_csum_good++;
505 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
506 * @adapter: address of board private structure
508 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
511 struct net_device *netdev = adapter->netdev;
512 struct pci_dev *pdev = adapter->pdev;
513 struct e1000_ring *rx_ring = adapter->rx_ring;
514 struct e1000_rx_desc *rx_desc;
515 struct e1000_buffer *buffer_info;
518 unsigned int bufsz = adapter->rx_buffer_len;
520 i = rx_ring->next_to_use;
521 buffer_info = &rx_ring->buffer_info[i];
523 while (cleaned_count--) {
524 skb = buffer_info->skb;
530 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
532 /* Better luck next round */
533 adapter->alloc_rx_buff_failed++;
537 buffer_info->skb = skb;
539 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
540 adapter->rx_buffer_len,
542 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
543 dev_err(&pdev->dev, "RX DMA map failed\n");
544 adapter->rx_dma_failed++;
548 rx_desc = E1000_RX_DESC(*rx_ring, i);
549 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
551 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
553 * Force memory writes to complete before letting h/w
554 * know there are new descriptors to fetch. (Only
555 * applicable for weak-ordered memory model archs,
559 writel(i, adapter->hw.hw_addr + rx_ring->tail);
562 if (i == rx_ring->count)
564 buffer_info = &rx_ring->buffer_info[i];
567 rx_ring->next_to_use = i;
571 * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
572 * @adapter: address of board private structure
574 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
577 struct net_device *netdev = adapter->netdev;
578 struct pci_dev *pdev = adapter->pdev;
579 union e1000_rx_desc_packet_split *rx_desc;
580 struct e1000_ring *rx_ring = adapter->rx_ring;
581 struct e1000_buffer *buffer_info;
582 struct e1000_ps_page *ps_page;
586 i = rx_ring->next_to_use;
587 buffer_info = &rx_ring->buffer_info[i];
589 while (cleaned_count--) {
590 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
592 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
593 ps_page = &buffer_info->ps_pages[j];
594 if (j >= adapter->rx_ps_pages) {
595 /* all unused desc entries get hw null ptr */
596 rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
599 if (!ps_page->page) {
600 ps_page->page = alloc_page(GFP_ATOMIC);
601 if (!ps_page->page) {
602 adapter->alloc_rx_buff_failed++;
605 ps_page->dma = dma_map_page(&pdev->dev,
609 if (dma_mapping_error(&pdev->dev,
611 dev_err(&adapter->pdev->dev,
612 "RX DMA page map failed\n");
613 adapter->rx_dma_failed++;
618 * Refresh the desc even if buffer_addrs
619 * didn't change because each write-back
622 rx_desc->read.buffer_addr[j+1] =
623 cpu_to_le64(ps_page->dma);
626 skb = netdev_alloc_skb_ip_align(netdev,
627 adapter->rx_ps_bsize0);
630 adapter->alloc_rx_buff_failed++;
634 buffer_info->skb = skb;
635 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
636 adapter->rx_ps_bsize0,
638 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
639 dev_err(&pdev->dev, "RX DMA map failed\n");
640 adapter->rx_dma_failed++;
642 dev_kfree_skb_any(skb);
643 buffer_info->skb = NULL;
647 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
649 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
651 * Force memory writes to complete before letting h/w
652 * know there are new descriptors to fetch. (Only
653 * applicable for weak-ordered memory model archs,
657 writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
661 if (i == rx_ring->count)
663 buffer_info = &rx_ring->buffer_info[i];
667 rx_ring->next_to_use = i;
671 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
672 * @adapter: address of board private structure
673 * @cleaned_count: number of buffers to allocate this pass
676 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
679 struct net_device *netdev = adapter->netdev;
680 struct pci_dev *pdev = adapter->pdev;
681 struct e1000_rx_desc *rx_desc;
682 struct e1000_ring *rx_ring = adapter->rx_ring;
683 struct e1000_buffer *buffer_info;
686 unsigned int bufsz = 256 - 16 /* for skb_reserve */;
688 i = rx_ring->next_to_use;
689 buffer_info = &rx_ring->buffer_info[i];
691 while (cleaned_count--) {
692 skb = buffer_info->skb;
698 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
699 if (unlikely(!skb)) {
700 /* Better luck next round */
701 adapter->alloc_rx_buff_failed++;
705 buffer_info->skb = skb;
707 /* allocate a new page if necessary */
708 if (!buffer_info->page) {
709 buffer_info->page = alloc_page(GFP_ATOMIC);
710 if (unlikely(!buffer_info->page)) {
711 adapter->alloc_rx_buff_failed++;
716 if (!buffer_info->dma)
717 buffer_info->dma = dma_map_page(&pdev->dev,
718 buffer_info->page, 0,
722 rx_desc = E1000_RX_DESC(*rx_ring, i);
723 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
725 if (unlikely(++i == rx_ring->count))
727 buffer_info = &rx_ring->buffer_info[i];
730 if (likely(rx_ring->next_to_use != i)) {
731 rx_ring->next_to_use = i;
732 if (unlikely(i-- == 0))
733 i = (rx_ring->count - 1);
735 /* Force memory writes to complete before letting h/w
736 * know there are new descriptors to fetch. (Only
737 * applicable for weak-ordered memory model archs,
740 writel(i, adapter->hw.hw_addr + rx_ring->tail);
745 * e1000_clean_rx_irq - Send received data up the network stack; legacy
746 * @adapter: board private structure
748 * the return value indicates whether actual cleaning was done, there
749 * is no guarantee that everything was cleaned
751 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
752 int *work_done, int work_to_do)
754 struct net_device *netdev = adapter->netdev;
755 struct pci_dev *pdev = adapter->pdev;
756 struct e1000_hw *hw = &adapter->hw;
757 struct e1000_ring *rx_ring = adapter->rx_ring;
758 struct e1000_rx_desc *rx_desc, *next_rxd;
759 struct e1000_buffer *buffer_info, *next_buffer;
762 int cleaned_count = 0;
764 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
766 i = rx_ring->next_to_clean;
767 rx_desc = E1000_RX_DESC(*rx_ring, i);
768 buffer_info = &rx_ring->buffer_info[i];
770 while (rx_desc->status & E1000_RXD_STAT_DD) {
774 if (*work_done >= work_to_do)
778 status = rx_desc->status;
779 skb = buffer_info->skb;
780 buffer_info->skb = NULL;
782 prefetch(skb->data - NET_IP_ALIGN);
785 if (i == rx_ring->count)
787 next_rxd = E1000_RX_DESC(*rx_ring, i);
790 next_buffer = &rx_ring->buffer_info[i];
794 dma_unmap_single(&pdev->dev,
796 adapter->rx_buffer_len,
798 buffer_info->dma = 0;
800 length = le16_to_cpu(rx_desc->length);
803 * !EOP means multiple descriptors were used to store a single
804 * packet, if that's the case we need to toss it. In fact, we
805 * need to toss every packet with the EOP bit clear and the
806 * next frame that _does_ have the EOP bit set, as it is by
807 * definition only a frame fragment
809 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
810 adapter->flags2 |= FLAG2_IS_DISCARDING;
812 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
813 /* All receives must fit into a single buffer */
814 e_dbg("Receive packet consumed multiple buffers\n");
816 buffer_info->skb = skb;
817 if (status & E1000_RXD_STAT_EOP)
818 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
822 if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
824 buffer_info->skb = skb;
828 /* adjust length to remove Ethernet CRC */
829 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
832 total_rx_bytes += length;
836 * code added for copybreak, this should improve
837 * performance for small packets with large amounts
838 * of reassembly being done in the stack
840 if (length < copybreak) {
841 struct sk_buff *new_skb =
842 netdev_alloc_skb_ip_align(netdev, length);
844 skb_copy_to_linear_data_offset(new_skb,
850 /* save the skb in buffer_info as good */
851 buffer_info->skb = skb;
854 /* else just continue with the old one */
856 /* end copybreak code */
857 skb_put(skb, length);
859 /* Receive Checksum Offload */
860 e1000_rx_checksum(adapter,
862 ((u32)(rx_desc->errors) << 24),
863 le16_to_cpu(rx_desc->csum), skb);
865 e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
870 /* return some buffers to hardware, one at a time is too slow */
871 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
872 adapter->alloc_rx_buf(adapter, cleaned_count);
876 /* use prefetched values */
878 buffer_info = next_buffer;
880 rx_ring->next_to_clean = i;
882 cleaned_count = e1000_desc_unused(rx_ring);
884 adapter->alloc_rx_buf(adapter, cleaned_count);
886 adapter->total_rx_bytes += total_rx_bytes;
887 adapter->total_rx_packets += total_rx_packets;
888 netdev->stats.rx_bytes += total_rx_bytes;
889 netdev->stats.rx_packets += total_rx_packets;
893 static void e1000_put_txbuf(struct e1000_adapter *adapter,
894 struct e1000_buffer *buffer_info)
896 if (buffer_info->dma) {
897 if (buffer_info->mapped_as_page)
898 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
899 buffer_info->length, DMA_TO_DEVICE);
901 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
902 buffer_info->length, DMA_TO_DEVICE);
903 buffer_info->dma = 0;
905 if (buffer_info->skb) {
906 dev_kfree_skb_any(buffer_info->skb);
907 buffer_info->skb = NULL;
909 buffer_info->time_stamp = 0;
912 static void e1000_print_hw_hang(struct work_struct *work)
914 struct e1000_adapter *adapter = container_of(work,
915 struct e1000_adapter,
917 struct e1000_ring *tx_ring = adapter->tx_ring;
918 unsigned int i = tx_ring->next_to_clean;
919 unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
920 struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
921 struct e1000_hw *hw = &adapter->hw;
922 u16 phy_status, phy_1000t_status, phy_ext_status;
925 e1e_rphy(hw, PHY_STATUS, &phy_status);
926 e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
927 e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
929 pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
931 /* detected Hardware unit hang */
932 e_err("Detected Hardware Unit Hang:\n"
935 " next_to_use <%x>\n"
936 " next_to_clean <%x>\n"
937 "buffer_info[next_to_clean]:\n"
938 " time_stamp <%lx>\n"
939 " next_to_watch <%x>\n"
941 " next_to_watch.status <%x>\n"
944 "PHY 1000BASE-T Status <%x>\n"
945 "PHY Extended Status <%x>\n"
947 readl(adapter->hw.hw_addr + tx_ring->head),
948 readl(adapter->hw.hw_addr + tx_ring->tail),
949 tx_ring->next_to_use,
950 tx_ring->next_to_clean,
951 tx_ring->buffer_info[eop].time_stamp,
954 eop_desc->upper.fields.status,
963 * e1000_clean_tx_irq - Reclaim resources after transmit completes
964 * @adapter: board private structure
966 * the return value indicates whether actual cleaning was done, there
967 * is no guarantee that everything was cleaned
969 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
971 struct net_device *netdev = adapter->netdev;
972 struct e1000_hw *hw = &adapter->hw;
973 struct e1000_ring *tx_ring = adapter->tx_ring;
974 struct e1000_tx_desc *tx_desc, *eop_desc;
975 struct e1000_buffer *buffer_info;
977 unsigned int count = 0;
978 unsigned int total_tx_bytes = 0, total_tx_packets = 0;
980 i = tx_ring->next_to_clean;
981 eop = tx_ring->buffer_info[i].next_to_watch;
982 eop_desc = E1000_TX_DESC(*tx_ring, eop);
984 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
985 (count < tx_ring->count)) {
986 bool cleaned = false;
987 for (; !cleaned; count++) {
988 tx_desc = E1000_TX_DESC(*tx_ring, i);
989 buffer_info = &tx_ring->buffer_info[i];
990 cleaned = (i == eop);
993 total_tx_packets += buffer_info->segs;
994 total_tx_bytes += buffer_info->bytecount;
997 e1000_put_txbuf(adapter, buffer_info);
998 tx_desc->upper.data = 0;
1001 if (i == tx_ring->count)
1005 if (i == tx_ring->next_to_use)
1007 eop = tx_ring->buffer_info[i].next_to_watch;
1008 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1011 tx_ring->next_to_clean = i;
1013 #define TX_WAKE_THRESHOLD 32
1014 if (count && netif_carrier_ok(netdev) &&
1015 e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
1016 /* Make sure that anybody stopping the queue after this
1017 * sees the new next_to_clean.
1021 if (netif_queue_stopped(netdev) &&
1022 !(test_bit(__E1000_DOWN, &adapter->state))) {
1023 netif_wake_queue(netdev);
1024 ++adapter->restart_queue;
1028 if (adapter->detect_tx_hung) {
1030 * Detect a transmit hang in hardware, this serializes the
1031 * check with the clearing of time_stamp and movement of i
1033 adapter->detect_tx_hung = 0;
1034 if (tx_ring->buffer_info[i].time_stamp &&
1035 time_after(jiffies, tx_ring->buffer_info[i].time_stamp
1036 + (adapter->tx_timeout_factor * HZ)) &&
1037 !(er32(STATUS) & E1000_STATUS_TXOFF)) {
1038 schedule_work(&adapter->print_hang_task);
1039 netif_stop_queue(netdev);
1042 adapter->total_tx_bytes += total_tx_bytes;
1043 adapter->total_tx_packets += total_tx_packets;
1044 netdev->stats.tx_bytes += total_tx_bytes;
1045 netdev->stats.tx_packets += total_tx_packets;
1046 return (count < tx_ring->count);
1050 * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
1051 * @adapter: board private structure
1053 * the return value indicates whether actual cleaning was done, there
1054 * is no guarantee that everything was cleaned
1056 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
1057 int *work_done, int work_to_do)
1059 struct e1000_hw *hw = &adapter->hw;
1060 union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
1061 struct net_device *netdev = adapter->netdev;
1062 struct pci_dev *pdev = adapter->pdev;
1063 struct e1000_ring *rx_ring = adapter->rx_ring;
1064 struct e1000_buffer *buffer_info, *next_buffer;
1065 struct e1000_ps_page *ps_page;
1066 struct sk_buff *skb;
1068 u32 length, staterr;
1069 int cleaned_count = 0;
1071 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1073 i = rx_ring->next_to_clean;
1074 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
1075 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1076 buffer_info = &rx_ring->buffer_info[i];
1078 while (staterr & E1000_RXD_STAT_DD) {
1079 if (*work_done >= work_to_do)
1082 skb = buffer_info->skb;
1084 /* in the packet split case this is header only */
1085 prefetch(skb->data - NET_IP_ALIGN);
1088 if (i == rx_ring->count)
1090 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
1093 next_buffer = &rx_ring->buffer_info[i];
1097 dma_unmap_single(&pdev->dev, buffer_info->dma,
1098 adapter->rx_ps_bsize0,
1100 buffer_info->dma = 0;
1102 /* see !EOP comment in other rx routine */
1103 if (!(staterr & E1000_RXD_STAT_EOP))
1104 adapter->flags2 |= FLAG2_IS_DISCARDING;
1106 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
1107 e_dbg("Packet Split buffers didn't pick up the full "
1109 dev_kfree_skb_irq(skb);
1110 if (staterr & E1000_RXD_STAT_EOP)
1111 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1115 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
1116 dev_kfree_skb_irq(skb);
1120 length = le16_to_cpu(rx_desc->wb.middle.length0);
1123 e_dbg("Last part of the packet spanning multiple "
1125 dev_kfree_skb_irq(skb);
1130 skb_put(skb, length);
1134 * this looks ugly, but it seems compiler issues make it
1135 * more efficient than reusing j
1137 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
1140 * page alloc/put takes too long and effects small packet
1141 * throughput, so unsplit small packets and save the alloc/put
1142 * only valid in softirq (napi) context to call kmap_*
1144 if (l1 && (l1 <= copybreak) &&
1145 ((length + l1) <= adapter->rx_ps_bsize0)) {
1148 ps_page = &buffer_info->ps_pages[0];
1151 * there is no documentation about how to call
1152 * kmap_atomic, so we can't hold the mapping
1155 dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
1156 PAGE_SIZE, DMA_FROM_DEVICE);
1157 vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
1158 memcpy(skb_tail_pointer(skb), vaddr, l1);
1159 kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
1160 dma_sync_single_for_device(&pdev->dev, ps_page->dma,
1161 PAGE_SIZE, DMA_FROM_DEVICE);
1163 /* remove the CRC */
1164 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1172 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1173 length = le16_to_cpu(rx_desc->wb.upper.length[j]);
1177 ps_page = &buffer_info->ps_pages[j];
1178 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1181 skb_fill_page_desc(skb, j, ps_page->page, 0, length);
1182 ps_page->page = NULL;
1184 skb->data_len += length;
1185 skb->truesize += length;
1188 /* strip the ethernet crc, problem is we're using pages now so
1189 * this whole operation can get a little cpu intensive
1191 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
1192 pskb_trim(skb, skb->len - 4);
1195 total_rx_bytes += skb->len;
1198 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
1199 rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
1201 if (rx_desc->wb.upper.header_status &
1202 cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
1203 adapter->rx_hdr_split++;
1205 e1000_receive_skb(adapter, netdev, skb,
1206 staterr, rx_desc->wb.middle.vlan);
1209 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
1210 buffer_info->skb = NULL;
1212 /* return some buffers to hardware, one at a time is too slow */
1213 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1214 adapter->alloc_rx_buf(adapter, cleaned_count);
1218 /* use prefetched values */
1220 buffer_info = next_buffer;
1222 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1224 rx_ring->next_to_clean = i;
1226 cleaned_count = e1000_desc_unused(rx_ring);
1228 adapter->alloc_rx_buf(adapter, cleaned_count);
1230 adapter->total_rx_bytes += total_rx_bytes;
1231 adapter->total_rx_packets += total_rx_packets;
1232 netdev->stats.rx_bytes += total_rx_bytes;
1233 netdev->stats.rx_packets += total_rx_packets;
1238 * e1000_consume_page - helper function
1240 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
1245 skb->data_len += length;
1246 skb->truesize += length;
1250 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
1251 * @adapter: board private structure
1253 * the return value indicates whether actual cleaning was done, there
1254 * is no guarantee that everything was cleaned
1257 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
1258 int *work_done, int work_to_do)
1260 struct net_device *netdev = adapter->netdev;
1261 struct pci_dev *pdev = adapter->pdev;
1262 struct e1000_ring *rx_ring = adapter->rx_ring;
1263 struct e1000_rx_desc *rx_desc, *next_rxd;
1264 struct e1000_buffer *buffer_info, *next_buffer;
1267 int cleaned_count = 0;
1268 bool cleaned = false;
1269 unsigned int total_rx_bytes=0, total_rx_packets=0;
1271 i = rx_ring->next_to_clean;
1272 rx_desc = E1000_RX_DESC(*rx_ring, i);
1273 buffer_info = &rx_ring->buffer_info[i];
1275 while (rx_desc->status & E1000_RXD_STAT_DD) {
1276 struct sk_buff *skb;
1279 if (*work_done >= work_to_do)
1283 status = rx_desc->status;
1284 skb = buffer_info->skb;
1285 buffer_info->skb = NULL;
1288 if (i == rx_ring->count)
1290 next_rxd = E1000_RX_DESC(*rx_ring, i);
1293 next_buffer = &rx_ring->buffer_info[i];
1297 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
1299 buffer_info->dma = 0;
1301 length = le16_to_cpu(rx_desc->length);
1303 /* errors is only valid for DD + EOP descriptors */
1304 if (unlikely((status & E1000_RXD_STAT_EOP) &&
1305 (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
1306 /* recycle both page and skb */
1307 buffer_info->skb = skb;
1308 /* an error means any chain goes out the window
1310 if (rx_ring->rx_skb_top)
1311 dev_kfree_skb(rx_ring->rx_skb_top);
1312 rx_ring->rx_skb_top = NULL;
1316 #define rxtop rx_ring->rx_skb_top
1317 if (!(status & E1000_RXD_STAT_EOP)) {
1318 /* this descriptor is only the beginning (or middle) */
1320 /* this is the beginning of a chain */
1322 skb_fill_page_desc(rxtop, 0, buffer_info->page,
1325 /* this is the middle of a chain */
1326 skb_fill_page_desc(rxtop,
1327 skb_shinfo(rxtop)->nr_frags,
1328 buffer_info->page, 0, length);
1329 /* re-use the skb, only consumed the page */
1330 buffer_info->skb = skb;
1332 e1000_consume_page(buffer_info, rxtop, length);
1336 /* end of the chain */
1337 skb_fill_page_desc(rxtop,
1338 skb_shinfo(rxtop)->nr_frags,
1339 buffer_info->page, 0, length);
1340 /* re-use the current skb, we only consumed the
1342 buffer_info->skb = skb;
1345 e1000_consume_page(buffer_info, skb, length);
1347 /* no chain, got EOP, this buf is the packet
1348 * copybreak to save the put_page/alloc_page */
1349 if (length <= copybreak &&
1350 skb_tailroom(skb) >= length) {
1352 vaddr = kmap_atomic(buffer_info->page,
1353 KM_SKB_DATA_SOFTIRQ);
1354 memcpy(skb_tail_pointer(skb), vaddr,
1356 kunmap_atomic(vaddr,
1357 KM_SKB_DATA_SOFTIRQ);
1358 /* re-use the page, so don't erase
1359 * buffer_info->page */
1360 skb_put(skb, length);
1362 skb_fill_page_desc(skb, 0,
1363 buffer_info->page, 0,
1365 e1000_consume_page(buffer_info, skb,
1371 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1372 e1000_rx_checksum(adapter,
1374 ((u32)(rx_desc->errors) << 24),
1375 le16_to_cpu(rx_desc->csum), skb);
1377 /* probably a little skewed due to removing CRC */
1378 total_rx_bytes += skb->len;
1381 /* eth type trans needs skb->data to point to something */
1382 if (!pskb_may_pull(skb, ETH_HLEN)) {
1383 e_err("pskb_may_pull failed.\n");
1388 e1000_receive_skb(adapter, netdev, skb, status,
1392 rx_desc->status = 0;
1394 /* return some buffers to hardware, one at a time is too slow */
1395 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1396 adapter->alloc_rx_buf(adapter, cleaned_count);
1400 /* use prefetched values */
1402 buffer_info = next_buffer;
1404 rx_ring->next_to_clean = i;
1406 cleaned_count = e1000_desc_unused(rx_ring);
1408 adapter->alloc_rx_buf(adapter, cleaned_count);
1410 adapter->total_rx_bytes += total_rx_bytes;
1411 adapter->total_rx_packets += total_rx_packets;
1412 netdev->stats.rx_bytes += total_rx_bytes;
1413 netdev->stats.rx_packets += total_rx_packets;
1418 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1419 * @adapter: board private structure
1421 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1423 struct e1000_ring *rx_ring = adapter->rx_ring;
1424 struct e1000_buffer *buffer_info;
1425 struct e1000_ps_page *ps_page;
1426 struct pci_dev *pdev = adapter->pdev;
1429 /* Free all the Rx ring sk_buffs */
1430 for (i = 0; i < rx_ring->count; i++) {
1431 buffer_info = &rx_ring->buffer_info[i];
1432 if (buffer_info->dma) {
1433 if (adapter->clean_rx == e1000_clean_rx_irq)
1434 dma_unmap_single(&pdev->dev, buffer_info->dma,
1435 adapter->rx_buffer_len,
1437 else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1438 dma_unmap_page(&pdev->dev, buffer_info->dma,
1441 else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1442 dma_unmap_single(&pdev->dev, buffer_info->dma,
1443 adapter->rx_ps_bsize0,
1445 buffer_info->dma = 0;
1448 if (buffer_info->page) {
1449 put_page(buffer_info->page);
1450 buffer_info->page = NULL;
1453 if (buffer_info->skb) {
1454 dev_kfree_skb(buffer_info->skb);
1455 buffer_info->skb = NULL;
1458 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1459 ps_page = &buffer_info->ps_pages[j];
1462 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1465 put_page(ps_page->page);
1466 ps_page->page = NULL;
1470 /* there also may be some cached data from a chained receive */
1471 if (rx_ring->rx_skb_top) {
1472 dev_kfree_skb(rx_ring->rx_skb_top);
1473 rx_ring->rx_skb_top = NULL;
1476 /* Zero out the descriptor ring */
1477 memset(rx_ring->desc, 0, rx_ring->size);
1479 rx_ring->next_to_clean = 0;
1480 rx_ring->next_to_use = 0;
1481 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1483 writel(0, adapter->hw.hw_addr + rx_ring->head);
1484 writel(0, adapter->hw.hw_addr + rx_ring->tail);
1487 static void e1000e_downshift_workaround(struct work_struct *work)
1489 struct e1000_adapter *adapter = container_of(work,
1490 struct e1000_adapter, downshift_task);
1492 e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1496 * e1000_intr_msi - Interrupt Handler
1497 * @irq: interrupt number
1498 * @data: pointer to a network interface device structure
1500 static irqreturn_t e1000_intr_msi(int irq, void *data)
1502 struct net_device *netdev = data;
1503 struct e1000_adapter *adapter = netdev_priv(netdev);
1504 struct e1000_hw *hw = &adapter->hw;
1505 u32 icr = er32(ICR);
1508 * read ICR disables interrupts using IAM
1511 if (icr & E1000_ICR_LSC) {
1512 hw->mac.get_link_status = 1;
1514 * ICH8 workaround-- Call gig speed drop workaround on cable
1515 * disconnect (LSC) before accessing any PHY registers
1517 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1518 (!(er32(STATUS) & E1000_STATUS_LU)))
1519 schedule_work(&adapter->downshift_task);
1522 * 80003ES2LAN workaround-- For packet buffer work-around on
1523 * link down event; disable receives here in the ISR and reset
1524 * adapter in watchdog
1526 if (netif_carrier_ok(netdev) &&
1527 adapter->flags & FLAG_RX_NEEDS_RESTART) {
1528 /* disable receives */
1529 u32 rctl = er32(RCTL);
1530 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1531 adapter->flags |= FLAG_RX_RESTART_NOW;
1533 /* guard against interrupt when we're going down */
1534 if (!test_bit(__E1000_DOWN, &adapter->state))
1535 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1538 if (napi_schedule_prep(&adapter->napi)) {
1539 adapter->total_tx_bytes = 0;
1540 adapter->total_tx_packets = 0;
1541 adapter->total_rx_bytes = 0;
1542 adapter->total_rx_packets = 0;
1543 __napi_schedule(&adapter->napi);
1550 * e1000_intr - Interrupt Handler
1551 * @irq: interrupt number
1552 * @data: pointer to a network interface device structure
1554 static irqreturn_t e1000_intr(int irq, void *data)
1556 struct net_device *netdev = data;
1557 struct e1000_adapter *adapter = netdev_priv(netdev);
1558 struct e1000_hw *hw = &adapter->hw;
1559 u32 rctl, icr = er32(ICR);
1561 if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1562 return IRQ_NONE; /* Not our interrupt */
1565 * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1566 * not set, then the adapter didn't send an interrupt
1568 if (!(icr & E1000_ICR_INT_ASSERTED))
1572 * Interrupt Auto-Mask...upon reading ICR,
1573 * interrupts are masked. No need for the
1577 if (icr & E1000_ICR_LSC) {
1578 hw->mac.get_link_status = 1;
1580 * ICH8 workaround-- Call gig speed drop workaround on cable
1581 * disconnect (LSC) before accessing any PHY registers
1583 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1584 (!(er32(STATUS) & E1000_STATUS_LU)))
1585 schedule_work(&adapter->downshift_task);
1588 * 80003ES2LAN workaround--
1589 * For packet buffer work-around on link down event;
1590 * disable receives here in the ISR and
1591 * reset adapter in watchdog
1593 if (netif_carrier_ok(netdev) &&
1594 (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1595 /* disable receives */
1597 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1598 adapter->flags |= FLAG_RX_RESTART_NOW;
1600 /* guard against interrupt when we're going down */
1601 if (!test_bit(__E1000_DOWN, &adapter->state))
1602 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1605 if (napi_schedule_prep(&adapter->napi)) {
1606 adapter->total_tx_bytes = 0;
1607 adapter->total_tx_packets = 0;
1608 adapter->total_rx_bytes = 0;
1609 adapter->total_rx_packets = 0;
1610 __napi_schedule(&adapter->napi);
1616 static irqreturn_t e1000_msix_other(int irq, void *data)
1618 struct net_device *netdev = data;
1619 struct e1000_adapter *adapter = netdev_priv(netdev);
1620 struct e1000_hw *hw = &adapter->hw;
1621 u32 icr = er32(ICR);
1623 if (!(icr & E1000_ICR_INT_ASSERTED)) {
1624 if (!test_bit(__E1000_DOWN, &adapter->state))
1625 ew32(IMS, E1000_IMS_OTHER);
1629 if (icr & adapter->eiac_mask)
1630 ew32(ICS, (icr & adapter->eiac_mask));
1632 if (icr & E1000_ICR_OTHER) {
1633 if (!(icr & E1000_ICR_LSC))
1634 goto no_link_interrupt;
1635 hw->mac.get_link_status = 1;
1636 /* guard against interrupt when we're going down */
1637 if (!test_bit(__E1000_DOWN, &adapter->state))
1638 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1642 if (!test_bit(__E1000_DOWN, &adapter->state))
1643 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
1649 static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
1651 struct net_device *netdev = data;
1652 struct e1000_adapter *adapter = netdev_priv(netdev);
1653 struct e1000_hw *hw = &adapter->hw;
1654 struct e1000_ring *tx_ring = adapter->tx_ring;
1657 adapter->total_tx_bytes = 0;
1658 adapter->total_tx_packets = 0;
1660 if (!e1000_clean_tx_irq(adapter))
1661 /* Ring was not completely cleaned, so fire another interrupt */
1662 ew32(ICS, tx_ring->ims_val);
1667 static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
1669 struct net_device *netdev = data;
1670 struct e1000_adapter *adapter = netdev_priv(netdev);
1672 /* Write the ITR value calculated at the end of the
1673 * previous interrupt.
1675 if (adapter->rx_ring->set_itr) {
1676 writel(1000000000 / (adapter->rx_ring->itr_val * 256),
1677 adapter->hw.hw_addr + adapter->rx_ring->itr_register);
1678 adapter->rx_ring->set_itr = 0;
1681 if (napi_schedule_prep(&adapter->napi)) {
1682 adapter->total_rx_bytes = 0;
1683 adapter->total_rx_packets = 0;
1684 __napi_schedule(&adapter->napi);
1690 * e1000_configure_msix - Configure MSI-X hardware
1692 * e1000_configure_msix sets up the hardware to properly
1693 * generate MSI-X interrupts.
1695 static void e1000_configure_msix(struct e1000_adapter *adapter)
1697 struct e1000_hw *hw = &adapter->hw;
1698 struct e1000_ring *rx_ring = adapter->rx_ring;
1699 struct e1000_ring *tx_ring = adapter->tx_ring;
1701 u32 ctrl_ext, ivar = 0;
1703 adapter->eiac_mask = 0;
1705 /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1706 if (hw->mac.type == e1000_82574) {
1707 u32 rfctl = er32(RFCTL);
1708 rfctl |= E1000_RFCTL_ACK_DIS;
1712 #define E1000_IVAR_INT_ALLOC_VALID 0x8
1713 /* Configure Rx vector */
1714 rx_ring->ims_val = E1000_IMS_RXQ0;
1715 adapter->eiac_mask |= rx_ring->ims_val;
1716 if (rx_ring->itr_val)
1717 writel(1000000000 / (rx_ring->itr_val * 256),
1718 hw->hw_addr + rx_ring->itr_register);
1720 writel(1, hw->hw_addr + rx_ring->itr_register);
1721 ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1723 /* Configure Tx vector */
1724 tx_ring->ims_val = E1000_IMS_TXQ0;
1726 if (tx_ring->itr_val)
1727 writel(1000000000 / (tx_ring->itr_val * 256),
1728 hw->hw_addr + tx_ring->itr_register);
1730 writel(1, hw->hw_addr + tx_ring->itr_register);
1731 adapter->eiac_mask |= tx_ring->ims_val;
1732 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
1734 /* set vector for Other Causes, e.g. link changes */
1736 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
1737 if (rx_ring->itr_val)
1738 writel(1000000000 / (rx_ring->itr_val * 256),
1739 hw->hw_addr + E1000_EITR_82574(vector));
1741 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
1743 /* Cause Tx interrupts on every write back */
1748 /* enable MSI-X PBA support */
1749 ctrl_ext = er32(CTRL_EXT);
1750 ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
1752 /* Auto-Mask Other interrupts upon ICR read */
1753 #define E1000_EIAC_MASK_82574 0x01F00000
1754 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
1755 ctrl_ext |= E1000_CTRL_EXT_EIAME;
1756 ew32(CTRL_EXT, ctrl_ext);
1760 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
1762 if (adapter->msix_entries) {
1763 pci_disable_msix(adapter->pdev);
1764 kfree(adapter->msix_entries);
1765 adapter->msix_entries = NULL;
1766 } else if (adapter->flags & FLAG_MSI_ENABLED) {
1767 pci_disable_msi(adapter->pdev);
1768 adapter->flags &= ~FLAG_MSI_ENABLED;
1775 * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
1777 * Attempt to configure interrupts using the best available
1778 * capabilities of the hardware and kernel.
1780 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
1786 switch (adapter->int_mode) {
1787 case E1000E_INT_MODE_MSIX:
1788 if (adapter->flags & FLAG_HAS_MSIX) {
1789 numvecs = 3; /* RxQ0, TxQ0 and other */
1790 adapter->msix_entries = kcalloc(numvecs,
1791 sizeof(struct msix_entry),
1793 if (adapter->msix_entries) {
1794 for (i = 0; i < numvecs; i++)
1795 adapter->msix_entries[i].entry = i;
1797 err = pci_enable_msix(adapter->pdev,
1798 adapter->msix_entries,
1803 /* MSI-X failed, so fall through and try MSI */
1804 e_err("Failed to initialize MSI-X interrupts. "
1805 "Falling back to MSI interrupts.\n");
1806 e1000e_reset_interrupt_capability(adapter);
1808 adapter->int_mode = E1000E_INT_MODE_MSI;
1810 case E1000E_INT_MODE_MSI:
1811 if (!pci_enable_msi(adapter->pdev)) {
1812 adapter->flags |= FLAG_MSI_ENABLED;
1814 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1815 e_err("Failed to initialize MSI interrupts. Falling "
1816 "back to legacy interrupts.\n");
1819 case E1000E_INT_MODE_LEGACY:
1820 /* Don't do anything; this is the system default */
1828 * e1000_request_msix - Initialize MSI-X interrupts
1830 * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
1833 static int e1000_request_msix(struct e1000_adapter *adapter)
1835 struct net_device *netdev = adapter->netdev;
1836 int err = 0, vector = 0;
1838 if (strlen(netdev->name) < (IFNAMSIZ - 5))
1839 sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
1841 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
1842 err = request_irq(adapter->msix_entries[vector].vector,
1843 e1000_intr_msix_rx, 0, adapter->rx_ring->name,
1847 adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
1848 adapter->rx_ring->itr_val = adapter->itr;
1851 if (strlen(netdev->name) < (IFNAMSIZ - 5))
1852 sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
1854 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
1855 err = request_irq(adapter->msix_entries[vector].vector,
1856 e1000_intr_msix_tx, 0, adapter->tx_ring->name,
1860 adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
1861 adapter->tx_ring->itr_val = adapter->itr;
1864 err = request_irq(adapter->msix_entries[vector].vector,
1865 e1000_msix_other, 0, netdev->name, netdev);
1869 e1000_configure_msix(adapter);
1876 * e1000_request_irq - initialize interrupts
1878 * Attempts to configure interrupts using the best available
1879 * capabilities of the hardware and kernel.
1881 static int e1000_request_irq(struct e1000_adapter *adapter)
1883 struct net_device *netdev = adapter->netdev;
1886 if (adapter->msix_entries) {
1887 err = e1000_request_msix(adapter);
1890 /* fall back to MSI */
1891 e1000e_reset_interrupt_capability(adapter);
1892 adapter->int_mode = E1000E_INT_MODE_MSI;
1893 e1000e_set_interrupt_capability(adapter);
1895 if (adapter->flags & FLAG_MSI_ENABLED) {
1896 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
1897 netdev->name, netdev);
1901 /* fall back to legacy interrupt */
1902 e1000e_reset_interrupt_capability(adapter);
1903 adapter->int_mode = E1000E_INT_MODE_LEGACY;
1906 err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
1907 netdev->name, netdev);
1909 e_err("Unable to allocate interrupt, Error: %d\n", err);
1914 static void e1000_free_irq(struct e1000_adapter *adapter)
1916 struct net_device *netdev = adapter->netdev;
1918 if (adapter->msix_entries) {
1921 free_irq(adapter->msix_entries[vector].vector, netdev);
1924 free_irq(adapter->msix_entries[vector].vector, netdev);
1927 /* Other Causes interrupt vector */
1928 free_irq(adapter->msix_entries[vector].vector, netdev);
1932 free_irq(adapter->pdev->irq, netdev);
1936 * e1000_irq_disable - Mask off interrupt generation on the NIC
1938 static void e1000_irq_disable(struct e1000_adapter *adapter)
1940 struct e1000_hw *hw = &adapter->hw;
1943 if (adapter->msix_entries)
1944 ew32(EIAC_82574, 0);
1946 synchronize_irq(adapter->pdev->irq);
1950 * e1000_irq_enable - Enable default interrupt generation settings
1952 static void e1000_irq_enable(struct e1000_adapter *adapter)
1954 struct e1000_hw *hw = &adapter->hw;
1956 if (adapter->msix_entries) {
1957 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
1958 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
1960 ew32(IMS, IMS_ENABLE_MASK);
1966 * e1000_get_hw_control - get control of the h/w from f/w
1967 * @adapter: address of board private structure
1969 * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1970 * For ASF and Pass Through versions of f/w this means that
1971 * the driver is loaded. For AMT version (only with 82573)
1972 * of the f/w this means that the network i/f is open.
1974 static void e1000_get_hw_control(struct e1000_adapter *adapter)
1976 struct e1000_hw *hw = &adapter->hw;
1980 /* Let firmware know the driver has taken over */
1981 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1983 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
1984 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1985 ctrl_ext = er32(CTRL_EXT);
1986 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1991 * e1000_release_hw_control - release control of the h/w to f/w
1992 * @adapter: address of board private structure
1994 * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1995 * For ASF and Pass Through versions of f/w this means that the
1996 * driver is no longer loaded. For AMT version (only with 82573) i
1997 * of the f/w this means that the network i/f is closed.
2000 static void e1000_release_hw_control(struct e1000_adapter *adapter)
2002 struct e1000_hw *hw = &adapter->hw;
2006 /* Let firmware taken over control of h/w */
2007 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2009 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
2010 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2011 ctrl_ext = er32(CTRL_EXT);
2012 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
2017 * @e1000_alloc_ring - allocate memory for a ring structure
2019 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
2020 struct e1000_ring *ring)
2022 struct pci_dev *pdev = adapter->pdev;
2024 ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
2033 * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
2034 * @adapter: board private structure
2036 * Return 0 on success, negative on failure
2038 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
2040 struct e1000_ring *tx_ring = adapter->tx_ring;
2041 int err = -ENOMEM, size;
2043 size = sizeof(struct e1000_buffer) * tx_ring->count;
2044 tx_ring->buffer_info = vmalloc(size);
2045 if (!tx_ring->buffer_info)
2047 memset(tx_ring->buffer_info, 0, size);
2049 /* round up to nearest 4K */
2050 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
2051 tx_ring->size = ALIGN(tx_ring->size, 4096);
2053 err = e1000_alloc_ring_dma(adapter, tx_ring);
2057 tx_ring->next_to_use = 0;
2058 tx_ring->next_to_clean = 0;
2062 vfree(tx_ring->buffer_info);
2063 e_err("Unable to allocate memory for the transmit descriptor ring\n");
2068 * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
2069 * @adapter: board private structure
2071 * Returns 0 on success, negative on failure
2073 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
2075 struct e1000_ring *rx_ring = adapter->rx_ring;
2076 struct e1000_buffer *buffer_info;
2077 int i, size, desc_len, err = -ENOMEM;
2079 size = sizeof(struct e1000_buffer) * rx_ring->count;
2080 rx_ring->buffer_info = vmalloc(size);
2081 if (!rx_ring->buffer_info)
2083 memset(rx_ring->buffer_info, 0, size);
2085 for (i = 0; i < rx_ring->count; i++) {
2086 buffer_info = &rx_ring->buffer_info[i];
2087 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
2088 sizeof(struct e1000_ps_page),
2090 if (!buffer_info->ps_pages)
2094 desc_len = sizeof(union e1000_rx_desc_packet_split);
2096 /* Round up to nearest 4K */
2097 rx_ring->size = rx_ring->count * desc_len;
2098 rx_ring->size = ALIGN(rx_ring->size, 4096);
2100 err = e1000_alloc_ring_dma(adapter, rx_ring);
2104 rx_ring->next_to_clean = 0;
2105 rx_ring->next_to_use = 0;
2106 rx_ring->rx_skb_top = NULL;
2111 for (i = 0; i < rx_ring->count; i++) {
2112 buffer_info = &rx_ring->buffer_info[i];
2113 kfree(buffer_info->ps_pages);
2116 vfree(rx_ring->buffer_info);
2117 e_err("Unable to allocate memory for the transmit descriptor ring\n");
2122 * e1000_clean_tx_ring - Free Tx Buffers
2123 * @adapter: board private structure
2125 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
2127 struct e1000_ring *tx_ring = adapter->tx_ring;
2128 struct e1000_buffer *buffer_info;
2132 for (i = 0; i < tx_ring->count; i++) {
2133 buffer_info = &tx_ring->buffer_info[i];
2134 e1000_put_txbuf(adapter, buffer_info);
2137 size = sizeof(struct e1000_buffer) * tx_ring->count;
2138 memset(tx_ring->buffer_info, 0, size);
2140 memset(tx_ring->desc, 0, tx_ring->size);
2142 tx_ring->next_to_use = 0;
2143 tx_ring->next_to_clean = 0;
2145 writel(0, adapter->hw.hw_addr + tx_ring->head);
2146 writel(0, adapter->hw.hw_addr + tx_ring->tail);
2150 * e1000e_free_tx_resources - Free Tx Resources per Queue
2151 * @adapter: board private structure
2153 * Free all transmit software resources
2155 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
2157 struct pci_dev *pdev = adapter->pdev;
2158 struct e1000_ring *tx_ring = adapter->tx_ring;
2160 e1000_clean_tx_ring(adapter);
2162 vfree(tx_ring->buffer_info);
2163 tx_ring->buffer_info = NULL;
2165 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
2167 tx_ring->desc = NULL;
2171 * e1000e_free_rx_resources - Free Rx Resources
2172 * @adapter: board private structure
2174 * Free all receive software resources
2177 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
2179 struct pci_dev *pdev = adapter->pdev;
2180 struct e1000_ring *rx_ring = adapter->rx_ring;
2183 e1000_clean_rx_ring(adapter);
2185 for (i = 0; i < rx_ring->count; i++) {
2186 kfree(rx_ring->buffer_info[i].ps_pages);
2189 vfree(rx_ring->buffer_info);
2190 rx_ring->buffer_info = NULL;
2192 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2194 rx_ring->desc = NULL;
2198 * e1000_update_itr - update the dynamic ITR value based on statistics
2199 * @adapter: pointer to adapter
2200 * @itr_setting: current adapter->itr
2201 * @packets: the number of packets during this measurement interval
2202 * @bytes: the number of bytes during this measurement interval
2204 * Stores a new ITR value based on packets and byte
2205 * counts during the last interrupt. The advantage of per interrupt
2206 * computation is faster updates and more accurate ITR for the current
2207 * traffic pattern. Constants in this function were computed
2208 * based on theoretical maximum wire speed and thresholds were set based
2209 * on testing data as well as attempting to minimize response time
2210 * while increasing bulk throughput. This functionality is controlled
2211 * by the InterruptThrottleRate module parameter.
2213 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2214 u16 itr_setting, int packets,
2217 unsigned int retval = itr_setting;
2220 goto update_itr_done;
2222 switch (itr_setting) {
2223 case lowest_latency:
2224 /* handle TSO and jumbo frames */
2225 if (bytes/packets > 8000)
2226 retval = bulk_latency;
2227 else if ((packets < 5) && (bytes > 512)) {
2228 retval = low_latency;
2231 case low_latency: /* 50 usec aka 20000 ints/s */
2232 if (bytes > 10000) {
2233 /* this if handles the TSO accounting */
2234 if (bytes/packets > 8000) {
2235 retval = bulk_latency;
2236 } else if ((packets < 10) || ((bytes/packets) > 1200)) {
2237 retval = bulk_latency;
2238 } else if ((packets > 35)) {
2239 retval = lowest_latency;
2241 } else if (bytes/packets > 2000) {
2242 retval = bulk_latency;
2243 } else if (packets <= 2 && bytes < 512) {
2244 retval = lowest_latency;
2247 case bulk_latency: /* 250 usec aka 4000 ints/s */
2248 if (bytes > 25000) {
2250 retval = low_latency;
2252 } else if (bytes < 6000) {
2253 retval = low_latency;
2262 static void e1000_set_itr(struct e1000_adapter *adapter)
2264 struct e1000_hw *hw = &adapter->hw;
2266 u32 new_itr = adapter->itr;
2268 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2269 if (adapter->link_speed != SPEED_1000) {
2275 adapter->tx_itr = e1000_update_itr(adapter,
2277 adapter->total_tx_packets,
2278 adapter->total_tx_bytes);
2279 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2280 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2281 adapter->tx_itr = low_latency;
2283 adapter->rx_itr = e1000_update_itr(adapter,
2285 adapter->total_rx_packets,
2286 adapter->total_rx_bytes);
2287 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2288 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2289 adapter->rx_itr = low_latency;
2291 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2293 switch (current_itr) {
2294 /* counts and packets in update_itr are dependent on these numbers */
2295 case lowest_latency:
2299 new_itr = 20000; /* aka hwitr = ~200 */
2309 if (new_itr != adapter->itr) {
2311 * this attempts to bias the interrupt rate towards Bulk
2312 * by adding intermediate steps when interrupt rate is
2315 new_itr = new_itr > adapter->itr ?
2316 min(adapter->itr + (new_itr >> 2), new_itr) :
2318 adapter->itr = new_itr;
2319 adapter->rx_ring->itr_val = new_itr;
2320 if (adapter->msix_entries)
2321 adapter->rx_ring->set_itr = 1;
2323 ew32(ITR, 1000000000 / (new_itr * 256));
2328 * e1000_alloc_queues - Allocate memory for all rings
2329 * @adapter: board private structure to initialize
2331 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
2333 adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2334 if (!adapter->tx_ring)
2337 adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2338 if (!adapter->rx_ring)
2343 e_err("Unable to allocate memory for queues\n");
2344 kfree(adapter->rx_ring);
2345 kfree(adapter->tx_ring);
2350 * e1000_clean - NAPI Rx polling callback
2351 * @napi: struct associated with this polling callback
2352 * @budget: amount of packets driver is allowed to process this poll
2354 static int e1000_clean(struct napi_struct *napi, int budget)
2356 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
2357 struct e1000_hw *hw = &adapter->hw;
2358 struct net_device *poll_dev = adapter->netdev;
2359 int tx_cleaned = 1, work_done = 0;
2361 adapter = netdev_priv(poll_dev);
2363 if (adapter->msix_entries &&
2364 !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2367 tx_cleaned = e1000_clean_tx_irq(adapter);
2370 adapter->clean_rx(adapter, &work_done, budget);
2375 /* If budget not fully consumed, exit the polling mode */
2376 if (work_done < budget) {
2377 if (adapter->itr_setting & 3)
2378 e1000_set_itr(adapter);
2379 napi_complete(napi);
2380 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2381 if (adapter->msix_entries)
2382 ew32(IMS, adapter->rx_ring->ims_val);
2384 e1000_irq_enable(adapter);
2391 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
2393 struct e1000_adapter *adapter = netdev_priv(netdev);
2394 struct e1000_hw *hw = &adapter->hw;
2397 /* don't update vlan cookie if already programmed */
2398 if ((adapter->hw.mng_cookie.status &
2399 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2400 (vid == adapter->mng_vlan_id))
2403 /* add VID to filter table */
2404 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2405 index = (vid >> 5) & 0x7F;
2406 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2407 vfta |= (1 << (vid & 0x1F));
2408 hw->mac.ops.write_vfta(hw, index, vfta);
2412 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
2414 struct e1000_adapter *adapter = netdev_priv(netdev);
2415 struct e1000_hw *hw = &adapter->hw;
2418 if (!test_bit(__E1000_DOWN, &adapter->state))
2419 e1000_irq_disable(adapter);
2420 vlan_group_set_device(adapter->vlgrp, vid, NULL);
2422 if (!test_bit(__E1000_DOWN, &adapter->state))
2423 e1000_irq_enable(adapter);
2425 if ((adapter->hw.mng_cookie.status &
2426 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2427 (vid == adapter->mng_vlan_id)) {
2428 /* release control to f/w */
2429 e1000_release_hw_control(adapter);
2433 /* remove VID from filter table */
2434 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2435 index = (vid >> 5) & 0x7F;
2436 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2437 vfta &= ~(1 << (vid & 0x1F));
2438 hw->mac.ops.write_vfta(hw, index, vfta);
2442 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2444 struct net_device *netdev = adapter->netdev;
2445 u16 vid = adapter->hw.mng_cookie.vlan_id;
2446 u16 old_vid = adapter->mng_vlan_id;
2448 if (!adapter->vlgrp)
2451 if (!vlan_group_get_device(adapter->vlgrp, vid)) {
2452 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2453 if (adapter->hw.mng_cookie.status &
2454 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2455 e1000_vlan_rx_add_vid(netdev, vid);
2456 adapter->mng_vlan_id = vid;
2459 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
2461 !vlan_group_get_device(adapter->vlgrp, old_vid))
2462 e1000_vlan_rx_kill_vid(netdev, old_vid);
2464 adapter->mng_vlan_id = vid;
2469 static void e1000_vlan_rx_register(struct net_device *netdev,
2470 struct vlan_group *grp)
2472 struct e1000_adapter *adapter = netdev_priv(netdev);
2473 struct e1000_hw *hw = &adapter->hw;
2476 if (!test_bit(__E1000_DOWN, &adapter->state))
2477 e1000_irq_disable(adapter);
2478 adapter->vlgrp = grp;
2481 /* enable VLAN tag insert/strip */
2483 ctrl |= E1000_CTRL_VME;
2486 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2487 /* enable VLAN receive filtering */
2489 rctl &= ~E1000_RCTL_CFIEN;
2491 e1000_update_mng_vlan(adapter);
2494 /* disable VLAN tag insert/strip */
2496 ctrl &= ~E1000_CTRL_VME;
2499 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2500 if (adapter->mng_vlan_id !=
2501 (u16)E1000_MNG_VLAN_NONE) {
2502 e1000_vlan_rx_kill_vid(netdev,
2503 adapter->mng_vlan_id);
2504 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2509 if (!test_bit(__E1000_DOWN, &adapter->state))
2510 e1000_irq_enable(adapter);
2513 static void e1000_restore_vlan(struct e1000_adapter *adapter)
2517 e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
2519 if (!adapter->vlgrp)
2522 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
2523 if (!vlan_group_get_device(adapter->vlgrp, vid))
2525 e1000_vlan_rx_add_vid(adapter->netdev, vid);
2529 static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
2531 struct e1000_hw *hw = &adapter->hw;
2532 u32 manc, manc2h, mdef, i, j;
2534 if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2540 * enable receiving management packets to the host. this will probably
2541 * generate destination unreachable messages from the host OS, but
2542 * the packets will be handled on SMBUS
2544 manc |= E1000_MANC_EN_MNG2HOST;
2545 manc2h = er32(MANC2H);
2547 switch (hw->mac.type) {
2549 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
2554 * Check if IPMI pass-through decision filter already exists;
2557 for (i = 0, j = 0; i < 8; i++) {
2558 mdef = er32(MDEF(i));
2560 /* Ignore filters with anything other than IPMI ports */
2561 if (mdef & !(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2564 /* Enable this decision filter in MANC2H */
2571 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2574 /* Create new decision filter in an empty filter */
2575 for (i = 0, j = 0; i < 8; i++)
2576 if (er32(MDEF(i)) == 0) {
2577 ew32(MDEF(i), (E1000_MDEF_PORT_623 |
2578 E1000_MDEF_PORT_664));
2585 e_warn("Unable to create IPMI pass-through filter\n");
2589 ew32(MANC2H, manc2h);
2594 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
2595 * @adapter: board private structure
2597 * Configure the Tx unit of the MAC after a reset.
2599 static void e1000_configure_tx(struct e1000_adapter *adapter)
2601 struct e1000_hw *hw = &adapter->hw;
2602 struct e1000_ring *tx_ring = adapter->tx_ring;
2604 u32 tdlen, tctl, tipg, tarc;
2607 /* Setup the HW Tx Head and Tail descriptor pointers */
2608 tdba = tx_ring->dma;
2609 tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2610 ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
2611 ew32(TDBAH, (tdba >> 32));
2615 tx_ring->head = E1000_TDH;
2616 tx_ring->tail = E1000_TDT;
2618 /* Set the default values for the Tx Inter Packet Gap timer */
2619 tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */
2620 ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */
2621 ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */
2623 if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
2624 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */
2626 tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
2627 tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
2630 /* Set the Tx Interrupt Delay register */
2631 ew32(TIDV, adapter->tx_int_delay);
2632 /* Tx irq moderation */
2633 ew32(TADV, adapter->tx_abs_int_delay);
2635 /* Program the Transmit Control Register */
2637 tctl &= ~E1000_TCTL_CT;
2638 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2639 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2641 if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2642 tarc = er32(TARC(0));
2644 * set the speed mode bit, we'll clear it if we're not at
2645 * gigabit link later
2647 #define SPEED_MODE_BIT (1 << 21)
2648 tarc |= SPEED_MODE_BIT;
2649 ew32(TARC(0), tarc);
2652 /* errata: program both queues to unweighted RR */
2653 if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2654 tarc = er32(TARC(0));
2656 ew32(TARC(0), tarc);
2657 tarc = er32(TARC(1));
2659 ew32(TARC(1), tarc);
2662 /* Setup Transmit Descriptor Settings for eop descriptor */
2663 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2665 /* only set IDE if we are delaying interrupts using the timers */
2666 if (adapter->tx_int_delay)
2667 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2669 /* enable Report Status bit */
2670 adapter->txd_cmd |= E1000_TXD_CMD_RS;
2674 e1000e_config_collision_dist(hw);
2678 * e1000_setup_rctl - configure the receive control registers
2679 * @adapter: Board private structure
2681 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
2682 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
2683 static void e1000_setup_rctl(struct e1000_adapter *adapter)
2685 struct e1000_hw *hw = &adapter->hw;
2690 /* Program MC offset vector base */
2692 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2693 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
2694 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
2695 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2697 /* Do not Store bad packets */
2698 rctl &= ~E1000_RCTL_SBP;
2700 /* Enable Long Packet receive */
2701 if (adapter->netdev->mtu <= ETH_DATA_LEN)
2702 rctl &= ~E1000_RCTL_LPE;
2704 rctl |= E1000_RCTL_LPE;
2706 /* Some systems expect that the CRC is included in SMBUS traffic. The
2707 * hardware strips the CRC before sending to both SMBUS (BMC) and to
2708 * host memory when this is enabled
2710 if (adapter->flags2 & FLAG2_CRC_STRIPPING)
2711 rctl |= E1000_RCTL_SECRC;
2713 /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
2714 if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
2717 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
2719 phy_data |= (1 << 2);
2720 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
2722 e1e_rphy(hw, 22, &phy_data);
2724 phy_data |= (1 << 14);
2725 e1e_wphy(hw, 0x10, 0x2823);
2726 e1e_wphy(hw, 0x11, 0x0003);
2727 e1e_wphy(hw, 22, phy_data);
2730 /* Setup buffer sizes */
2731 rctl &= ~E1000_RCTL_SZ_4096;
2732 rctl |= E1000_RCTL_BSEX;
2733 switch (adapter->rx_buffer_len) {
2736 rctl |= E1000_RCTL_SZ_2048;
2737 rctl &= ~E1000_RCTL_BSEX;
2740 rctl |= E1000_RCTL_SZ_4096;
2743 rctl |= E1000_RCTL_SZ_8192;
2746 rctl |= E1000_RCTL_SZ_16384;
2751 * 82571 and greater support packet-split where the protocol
2752 * header is placed in skb->data and the packet data is
2753 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2754 * In the case of a non-split, skb->data is linearly filled,
2755 * followed by the page buffers. Therefore, skb->data is
2756 * sized to hold the largest protocol header.
2758 * allocations using alloc_page take too long for regular MTU
2759 * so only enable packet split for jumbo frames
2761 * Using pages when the page size is greater than 16k wastes
2762 * a lot of memory, since we allocate 3 pages at all times
2765 pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2766 if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
2767 (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2768 adapter->rx_ps_pages = pages;
2770 adapter->rx_ps_pages = 0;
2772 if (adapter->rx_ps_pages) {
2773 /* Configure extra packet-split registers */
2774 rfctl = er32(RFCTL);
2775 rfctl |= E1000_RFCTL_EXTEN;
2777 * disable packet split support for IPv6 extension headers,
2778 * because some malformed IPv6 headers can hang the Rx
2780 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2781 E1000_RFCTL_NEW_IPV6_EXT_DIS);
2785 /* Enable Packet split descriptors */
2786 rctl |= E1000_RCTL_DTYP_PS;
2788 psrctl |= adapter->rx_ps_bsize0 >>
2789 E1000_PSRCTL_BSIZE0_SHIFT;
2791 switch (adapter->rx_ps_pages) {
2793 psrctl |= PAGE_SIZE <<
2794 E1000_PSRCTL_BSIZE3_SHIFT;
2796 psrctl |= PAGE_SIZE <<
2797 E1000_PSRCTL_BSIZE2_SHIFT;
2799 psrctl |= PAGE_SIZE >>
2800 E1000_PSRCTL_BSIZE1_SHIFT;
2804 ew32(PSRCTL, psrctl);
2808 /* just started the receive unit, no need to restart */
2809 adapter->flags &= ~FLAG_RX_RESTART_NOW;
2813 * e1000_configure_rx - Configure Receive Unit after Reset
2814 * @adapter: board private structure
2816 * Configure the Rx unit of the MAC after a reset.
2818 static void e1000_configure_rx(struct e1000_adapter *adapter)
2820 struct e1000_hw *hw = &adapter->hw;
2821 struct e1000_ring *rx_ring = adapter->rx_ring;
2823 u32 rdlen, rctl, rxcsum, ctrl_ext;
2825 if (adapter->rx_ps_pages) {
2826 /* this is a 32 byte descriptor */
2827 rdlen = rx_ring->count *
2828 sizeof(union e1000_rx_desc_packet_split);
2829 adapter->clean_rx = e1000_clean_rx_irq_ps;
2830 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2831 } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
2832 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2833 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
2834 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
2836 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2837 adapter->clean_rx = e1000_clean_rx_irq;
2838 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2841 /* disable receives while setting up the descriptors */
2843 ew32(RCTL, rctl & ~E1000_RCTL_EN);
2847 /* set the Receive Delay Timer Register */
2848 ew32(RDTR, adapter->rx_int_delay);
2850 /* irq moderation */
2851 ew32(RADV, adapter->rx_abs_int_delay);
2852 if (adapter->itr_setting != 0)
2853 ew32(ITR, 1000000000 / (adapter->itr * 256));
2855 ctrl_ext = er32(CTRL_EXT);
2856 /* Auto-Mask interrupts upon ICR access */
2857 ctrl_ext |= E1000_CTRL_EXT_IAME;
2858 ew32(IAM, 0xffffffff);
2859 ew32(CTRL_EXT, ctrl_ext);
2863 * Setup the HW Rx Head and Tail Descriptor Pointers and
2864 * the Base and Length of the Rx Descriptor Ring
2866 rdba = rx_ring->dma;
2867 ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
2868 ew32(RDBAH, (rdba >> 32));
2872 rx_ring->head = E1000_RDH;
2873 rx_ring->tail = E1000_RDT;
2875 /* Enable Receive Checksum Offload for TCP and UDP */
2876 rxcsum = er32(RXCSUM);
2877 if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
2878 rxcsum |= E1000_RXCSUM_TUOFL;
2881 * IPv4 payload checksum for UDP fragments must be
2882 * used in conjunction with packet-split.
2884 if (adapter->rx_ps_pages)
2885 rxcsum |= E1000_RXCSUM_IPPCSE;
2887 rxcsum &= ~E1000_RXCSUM_TUOFL;
2888 /* no need to clear IPPCSE as it defaults to 0 */
2890 ew32(RXCSUM, rxcsum);
2893 * Enable early receives on supported devices, only takes effect when
2894 * packet size is equal or larger than the specified value (in 8 byte
2895 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
2897 if (adapter->flags & FLAG_HAS_ERT) {
2898 if (adapter->netdev->mtu > ETH_DATA_LEN) {
2899 u32 rxdctl = er32(RXDCTL(0));
2900 ew32(RXDCTL(0), rxdctl | 0x3);
2901 ew32(ERT, E1000_ERT_2048 | (1 << 13));
2903 * With jumbo frames and early-receive enabled,
2904 * excessive C-state transition latencies result in
2905 * dropped transactions.
2907 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2908 adapter->netdev->name, 55);
2910 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2911 adapter->netdev->name,
2912 PM_QOS_DEFAULT_VALUE);
2916 /* Enable Receives */
2921 * e1000_update_mc_addr_list - Update Multicast addresses
2922 * @hw: pointer to the HW structure
2923 * @mc_addr_list: array of multicast addresses to program
2924 * @mc_addr_count: number of multicast addresses to program
2926 * Updates the Multicast Table Array.
2927 * The caller must have a packed mc_addr_list of multicast addresses.
2929 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
2932 hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
2936 * e1000_set_multi - Multicast and Promiscuous mode set
2937 * @netdev: network interface device structure
2939 * The set_multi entry point is called whenever the multicast address
2940 * list or the network interface flags are updated. This routine is
2941 * responsible for configuring the hardware for proper multicast,
2942 * promiscuous mode, and all-multi behavior.
2944 static void e1000_set_multi(struct net_device *netdev)
2946 struct e1000_adapter *adapter = netdev_priv(netdev);
2947 struct e1000_hw *hw = &adapter->hw;
2948 struct netdev_hw_addr *ha;
2953 /* Check for Promiscuous and All Multicast modes */
2957 if (netdev->flags & IFF_PROMISC) {
2958 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2959 rctl &= ~E1000_RCTL_VFE;
2961 if (netdev->flags & IFF_ALLMULTI) {
2962 rctl |= E1000_RCTL_MPE;
2963 rctl &= ~E1000_RCTL_UPE;
2965 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2967 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
2968 rctl |= E1000_RCTL_VFE;
2973 if (!netdev_mc_empty(netdev)) {
2974 mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
2978 /* prepare a packed array of only addresses. */
2980 netdev_for_each_mc_addr(ha, netdev)
2981 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
2983 e1000_update_mc_addr_list(hw, mta_list, i);
2987 * if we're called from probe, we might not have
2988 * anything to do here, so clear out the list
2990 e1000_update_mc_addr_list(hw, NULL, 0);
2995 * e1000_configure - configure the hardware for Rx and Tx
2996 * @adapter: private board structure
2998 static void e1000_configure(struct e1000_adapter *adapter)
3000 e1000_set_multi(adapter->netdev);
3002 e1000_restore_vlan(adapter);
3003 e1000_init_manageability_pt(adapter);
3005 e1000_configure_tx(adapter);
3006 e1000_setup_rctl(adapter);
3007 e1000_configure_rx(adapter);
3008 adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
3012 * e1000e_power_up_phy - restore link in case the phy was powered down
3013 * @adapter: address of board private structure
3015 * The phy may be powered down to save power and turn off link when the
3016 * driver is unloaded and wake on lan is not enabled (among others)
3017 * *** this routine MUST be followed by a call to e1000e_reset ***
3019 void e1000e_power_up_phy(struct e1000_adapter *adapter)
3021 if (adapter->hw.phy.ops.power_up)
3022 adapter->hw.phy.ops.power_up(&adapter->hw);
3024 adapter->hw.mac.ops.setup_link(&adapter->hw);
3028 * e1000_power_down_phy - Power down the PHY
3030 * Power down the PHY so no link is implied when interface is down.
3031 * The PHY cannot be powered down if management or WoL is active.
3033 static void e1000_power_down_phy(struct e1000_adapter *adapter)
3035 /* WoL is enabled */
3039 if (adapter->hw.phy.ops.power_down)
3040 adapter->hw.phy.ops.power_down(&adapter->hw);
3044 * e1000e_reset - bring the hardware into a known good state
3046 * This function boots the hardware and enables some settings that
3047 * require a configuration cycle of the hardware - those cannot be
3048 * set/changed during runtime. After reset the device needs to be
3049 * properly configured for Rx, Tx etc.
3051 void e1000e_reset(struct e1000_adapter *adapter)
3053 struct e1000_mac_info *mac = &adapter->hw.mac;
3054 struct e1000_fc_info *fc = &adapter->hw.fc;
3055 struct e1000_hw *hw = &adapter->hw;
3056 u32 tx_space, min_tx_space, min_rx_space;
3057 u32 pba = adapter->pba;
3060 /* reset Packet Buffer Allocation to default */
3063 if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
3065 * To maintain wire speed transmits, the Tx FIFO should be
3066 * large enough to accommodate two full transmit packets,
3067 * rounded up to the next 1KB and expressed in KB. Likewise,
3068 * the Rx FIFO should be large enough to accommodate at least
3069 * one full receive packet and is similarly rounded up and
3073 /* upper 16 bits has Tx packet buffer allocation size in KB */
3074 tx_space = pba >> 16;
3075 /* lower 16 bits has Rx packet buffer allocation size in KB */
3078 * the Tx fifo also stores 16 bytes of information about the tx
3079 * but don't include ethernet FCS because hardware appends it
3081 min_tx_space = (adapter->max_frame_size +
3082 sizeof(struct e1000_tx_desc) -
3084 min_tx_space = ALIGN(min_tx_space, 1024);
3085 min_tx_space >>= 10;
3086 /* software strips receive CRC, so leave room for it */
3087 min_rx_space = adapter->max_frame_size;
3088 min_rx_space = ALIGN(min_rx_space, 1024);
3089 min_rx_space >>= 10;
3092 * If current Tx allocation is less than the min Tx FIFO size,
3093 * and the min Tx FIFO size is less than the current Rx FIFO
3094 * allocation, take space away from current Rx allocation
3096 if ((tx_space < min_tx_space) &&
3097 ((min_tx_space - tx_space) < pba)) {
3098 pba -= min_tx_space - tx_space;
3101 * if short on Rx space, Rx wins and must trump tx
3102 * adjustment or use Early Receive if available
3104 if ((pba < min_rx_space) &&
3105 (!(adapter->flags & FLAG_HAS_ERT)))
3106 /* ERT enabled in e1000_configure_rx */
3115 * flow control settings
3117 * The high water mark must be low enough to fit one full frame
3118 * (or the size used for early receive) above it in the Rx FIFO.
3119 * Set it to the lower of:
3120 * - 90% of the Rx FIFO size, and
3121 * - the full Rx FIFO size minus the early receive size (for parts
3122 * with ERT support assuming ERT set to E1000_ERT_2048), or
3123 * - the full Rx FIFO size minus one full frame
3125 if (hw->mac.type == e1000_pchlan) {
3127 * Workaround PCH LOM adapter hangs with certain network
3128 * loads. If hangs persist, try disabling Tx flow control.
3130 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3131 fc->high_water = 0x3500;
3132 fc->low_water = 0x1500;
3134 fc->high_water = 0x5000;
3135 fc->low_water = 0x3000;
3137 fc->refresh_time = 0x1000;
3139 if ((adapter->flags & FLAG_HAS_ERT) &&
3140 (adapter->netdev->mtu > ETH_DATA_LEN))
3141 hwm = min(((pba << 10) * 9 / 10),
3142 ((pba << 10) - (E1000_ERT_2048 << 3)));
3144 hwm = min(((pba << 10) * 9 / 10),
3145 ((pba << 10) - adapter->max_frame_size));
3147 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
3148 fc->low_water = fc->high_water - 8;
3151 if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
3152 fc->pause_time = 0xFFFF;
3154 fc->pause_time = E1000_FC_PAUSE_TIME;
3156 fc->current_mode = fc->requested_mode;
3158 /* Allow time for pending master requests to run */
3159 mac->ops.reset_hw(hw);
3162 * For parts with AMT enabled, let the firmware know
3163 * that the network interface is in control
3165 if (adapter->flags & FLAG_HAS_AMT)
3166 e1000_get_hw_control(adapter);
3169 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
3170 e1e_wphy(&adapter->hw, BM_WUC, 0);
3172 if (mac->ops.init_hw(hw))
3173 e_err("Hardware Error\n");
3175 e1000_update_mng_vlan(adapter);
3177 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
3178 ew32(VET, ETH_P_8021Q);
3180 e1000e_reset_adaptive(hw);
3181 e1000_get_phy_info(hw);
3183 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
3184 !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
3187 * speed up time to link by disabling smart power down, ignore
3188 * the return value of this function because there is nothing
3189 * different we would do if it failed
3191 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
3192 phy_data &= ~IGP02E1000_PM_SPD;
3193 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
3197 int e1000e_up(struct e1000_adapter *adapter)
3199 struct e1000_hw *hw = &adapter->hw;
3201 /* DMA latency requirement to workaround early-receive/jumbo issue */
3202 if (adapter->flags & FLAG_HAS_ERT)
3203 pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
3204 adapter->netdev->name,
3205 PM_QOS_DEFAULT_VALUE);
3207 /* hardware has been reset, we need to reload some things */
3208 e1000_configure(adapter);
3210 clear_bit(__E1000_DOWN, &adapter->state);
3212 napi_enable(&adapter->napi);
3213 if (adapter->msix_entries)
3214 e1000_configure_msix(adapter);
3215 e1000_irq_enable(adapter);
3217 netif_wake_queue(adapter->netdev);
3219 /* fire a link change interrupt to start the watchdog */
3220 if (adapter->msix_entries)
3221 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3223 ew32(ICS, E1000_ICS_LSC);
3228 void e1000e_down(struct e1000_adapter *adapter)
3230 struct net_device *netdev = adapter->netdev;
3231 struct e1000_hw *hw = &adapter->hw;
3235 * signal that we're down so the interrupt handler does not
3236 * reschedule our watchdog timer
3238 set_bit(__E1000_DOWN, &adapter->state);
3240 /* disable receives in the hardware */
3242 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3243 /* flush and sleep below */
3245 netif_stop_queue(netdev);
3247 /* disable transmits in the hardware */
3249 tctl &= ~E1000_TCTL_EN;
3251 /* flush both disables and wait for them to finish */
3255 napi_disable(&adapter->napi);
3256 e1000_irq_disable(adapter);
3258 del_timer_sync(&adapter->watchdog_timer);
3259 del_timer_sync(&adapter->phy_info_timer);
3261 netif_carrier_off(netdev);
3262 adapter->link_speed = 0;
3263 adapter->link_duplex = 0;
3265 if (!pci_channel_offline(adapter->pdev))
3266 e1000e_reset(adapter);
3267 e1000_clean_tx_ring(adapter);
3268 e1000_clean_rx_ring(adapter);
3270 if (adapter->flags & FLAG_HAS_ERT)
3271 pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
3272 adapter->netdev->name);
3275 * TODO: for power management, we could drop the link and
3276 * pci_disable_device here.
3280 void e1000e_reinit_locked(struct e1000_adapter *adapter)
3283 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
3285 e1000e_down(adapter);
3287 clear_bit(__E1000_RESETTING, &adapter->state);
3291 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
3292 * @adapter: board private structure to initialize
3294 * e1000_sw_init initializes the Adapter private data structure.
3295 * Fields are initialized based on PCI device information and
3296 * OS network device settings (MTU size).
3298 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
3300 struct net_device *netdev = adapter->netdev;
3302 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
3303 adapter->rx_ps_bsize0 = 128;
3304 adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
3305 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
3307 e1000e_set_interrupt_capability(adapter);
3309 if (e1000_alloc_queues(adapter))
3312 /* Explicitly disable IRQ since the NIC can be in any state. */
3313 e1000_irq_disable(adapter);
3315 set_bit(__E1000_DOWN, &adapter->state);
3320 * e1000_intr_msi_test - Interrupt Handler
3321 * @irq: interrupt number
3322 * @data: pointer to a network interface device structure
3324 static irqreturn_t e1000_intr_msi_test(int irq, void *data)
3326 struct net_device *netdev = data;
3327 struct e1000_adapter *adapter = netdev_priv(netdev);
3328 struct e1000_hw *hw = &adapter->hw;
3329 u32 icr = er32(ICR);
3331 e_dbg("icr is %08X\n", icr);
3332 if (icr & E1000_ICR_RXSEQ) {
3333 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
3341 * e1000_test_msi_interrupt - Returns 0 for successful test
3342 * @adapter: board private struct
3344 * code flow taken from tg3.c
3346 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
3348 struct net_device *netdev = adapter->netdev;
3349 struct e1000_hw *hw = &adapter->hw;
3352 /* poll_enable hasn't been called yet, so don't need disable */
3353 /* clear any pending events */
3356 /* free the real vector and request a test handler */
3357 e1000_free_irq(adapter);
3358 e1000e_reset_interrupt_capability(adapter);
3360 /* Assume that the test fails, if it succeeds then the test
3361 * MSI irq handler will unset this flag */
3362 adapter->flags |= FLAG_MSI_TEST_FAILED;
3364 err = pci_enable_msi(adapter->pdev);
3366 goto msi_test_failed;
3368 err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
3369 netdev->name, netdev);
3371 pci_disable_msi(adapter->pdev);
3372 goto msi_test_failed;
3377 e1000_irq_enable(adapter);
3379 /* fire an unusual interrupt on the test handler */
3380 ew32(ICS, E1000_ICS_RXSEQ);
3384 e1000_irq_disable(adapter);
3388 if (adapter->flags & FLAG_MSI_TEST_FAILED) {
3389 adapter->int_mode = E1000E_INT_MODE_LEGACY;
3391 e_info("MSI interrupt test failed!\n");
3394 free_irq(adapter->pdev->irq, netdev);
3395 pci_disable_msi(adapter->pdev);
3398 goto msi_test_failed;
3400 /* okay so the test worked, restore settings */
3401 e_dbg("MSI interrupt test succeeded!\n");
3403 e1000e_set_interrupt_capability(adapter);
3404 e1000_request_irq(adapter);
3409 * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
3410 * @adapter: board private struct
3412 * code flow taken from tg3.c, called with e1000 interrupts disabled.
3414 static int e1000_test_msi(struct e1000_adapter *adapter)
3419 if (!(adapter->flags & FLAG_MSI_ENABLED))
3422 /* disable SERR in case the MSI write causes a master abort */
3423 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
3424 pci_write_config_word(adapter->pdev, PCI_COMMAND,
3425 pci_cmd & ~PCI_COMMAND_SERR);
3427 err = e1000_test_msi_interrupt(adapter);
3429 /* restore previous setting of command word */
3430 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
3436 /* EIO means MSI test failed */
3440 /* back to INTx mode */
3441 e_warn("MSI interrupt test failed, using legacy interrupt.\n");
3443 e1000_free_irq(adapter);
3445 err = e1000_request_irq(adapter);
3451 * e1000_open - Called when a network interface is made active
3452 * @netdev: network interface device structure
3454 * Returns 0 on success, negative value on failure
3456 * The open entry point is called when a network interface is made
3457 * active by the system (IFF_UP). At this point all resources needed
3458 * for transmit and receive operations are allocated, the interrupt
3459 * handler is registered with the OS, the watchdog timer is started,
3460 * and the stack is notified that the interface is ready.
3462 static int e1000_open(struct net_device *netdev)
3464 struct e1000_adapter *adapter = netdev_priv(netdev);
3465 struct e1000_hw *hw = &adapter->hw;
3466 struct pci_dev *pdev = adapter->pdev;
3469 /* disallow open during test */
3470 if (test_bit(__E1000_TESTING, &adapter->state))
3473 pm_runtime_get_sync(&pdev->dev);
3475 netif_carrier_off(netdev);
3477 /* allocate transmit descriptors */
3478 err = e1000e_setup_tx_resources(adapter);
3482 /* allocate receive descriptors */
3483 err = e1000e_setup_rx_resources(adapter);
3488 * If AMT is enabled, let the firmware know that the network
3489 * interface is now open and reset the part to a known state.
3491 if (adapter->flags & FLAG_HAS_AMT) {
3492 e1000_get_hw_control(adapter);
3493 e1000e_reset(adapter);
3496 e1000e_power_up_phy(adapter);
3498 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
3499 if ((adapter->hw.mng_cookie.status &
3500 E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
3501 e1000_update_mng_vlan(adapter);
3504 * before we allocate an interrupt, we must be ready to handle it.
3505 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3506 * as soon as we call pci_request_irq, so we have to setup our
3507 * clean_rx handler before we do so.
3509 e1000_configure(adapter);
3511 err = e1000_request_irq(adapter);
3516 * Work around PCIe errata with MSI interrupts causing some chipsets to
3517 * ignore e1000e MSI messages, which means we need to test our MSI
3520 if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
3521 err = e1000_test_msi(adapter);
3523 e_err("Interrupt allocation failed\n");
3528 /* From here on the code is the same as e1000e_up() */
3529 clear_bit(__E1000_DOWN, &adapter->state);
3531 napi_enable(&adapter->napi);
3533 e1000_irq_enable(adapter);
3535 netif_start_queue(netdev);
3537 adapter->idle_check = true;
3538 pm_runtime_put(&pdev->dev);
3540 /* fire a link status change interrupt to start the watchdog */
3541 if (adapter->msix_entries)
3542 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
3544 ew32(ICS, E1000_ICS_LSC);
3549 e1000_release_hw_control(adapter);
3550 e1000_power_down_phy(adapter);
3551 e1000e_free_rx_resources(adapter);
3553 e1000e_free_tx_resources(adapter);
3555 e1000e_reset(adapter);
3556 pm_runtime_put_sync(&pdev->dev);
3562 * e1000_close - Disables a network interface
3563 * @netdev: network interface device structure
3565 * Returns 0, this is not allowed to fail
3567 * The close entry point is called when an interface is de-activated
3568 * by the OS. The hardware is still under the drivers control, but
3569 * needs to be disabled. A global MAC reset is issued to stop the
3570 * hardware, and all transmit and receive resources are freed.
3572 static int e1000_close(struct net_device *netdev)
3574 struct e1000_adapter *adapter = netdev_priv(netdev);
3575 struct pci_dev *pdev = adapter->pdev;
3577 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3579 pm_runtime_get_sync(&pdev->dev);
3581 if (!test_bit(__E1000_DOWN, &adapter->state)) {
3582 e1000e_down(adapter);
3583 e1000_free_irq(adapter);
3585 e1000_power_down_phy(adapter);
3587 e1000e_free_tx_resources(adapter);
3588 e1000e_free_rx_resources(adapter);
3591 * kill manageability vlan ID if supported, but not if a vlan with
3592 * the same ID is registered on the host OS (let 8021q kill it)
3594 if ((adapter->hw.mng_cookie.status &
3595 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
3597 vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
3598 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
3601 * If AMT is enabled, let the firmware know that the network
3602 * interface is now closed
3604 if (adapter->flags & FLAG_HAS_AMT)
3605 e1000_release_hw_control(adapter);
3607 pm_runtime_put_sync(&pdev->dev);
3612 * e1000_set_mac - Change the Ethernet Address of the NIC
3613 * @netdev: network interface device structure
3614 * @p: pointer to an address structure
3616 * Returns 0 on success, negative on failure
3618 static int e1000_set_mac(struct net_device *netdev, void *p)
3620 struct e1000_adapter *adapter = netdev_priv(netdev);
3621 struct sockaddr *addr = p;
3623 if (!is_valid_ether_addr(addr->sa_data))
3624 return -EADDRNOTAVAIL;
3626 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3627 memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
3629 e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
3631 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
3632 /* activate the work around */
3633 e1000e_set_laa_state_82571(&adapter->hw, 1);
3636 * Hold a copy of the LAA in RAR[14] This is done so that
3637 * between the time RAR[0] gets clobbered and the time it
3638 * gets fixed (in e1000_watchdog), the actual LAA is in one
3639 * of the RARs and no incoming packets directed to this port
3640 * are dropped. Eventually the LAA will be in RAR[0] and
3643 e1000e_rar_set(&adapter->hw,
3644 adapter->hw.mac.addr,
3645 adapter->hw.mac.rar_entry_count - 1);
3652 * e1000e_update_phy_task - work thread to update phy
3653 * @work: pointer to our work struct
3655 * this worker thread exists because we must acquire a
3656 * semaphore to read the phy, which we could msleep while
3657 * waiting for it, and we can't msleep in a timer.
3659 static void e1000e_update_phy_task(struct work_struct *work)
3661 struct e1000_adapter *adapter = container_of(work,
3662 struct e1000_adapter, update_phy_task);
3663 e1000_get_phy_info(&adapter->hw);
3667 * Need to wait a few seconds after link up to get diagnostic information from
3670 static void e1000_update_phy_info(unsigned long data)
3672 struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3673 schedule_work(&adapter->update_phy_task);
3677 * e1000e_update_stats - Update the board statistics counters
3678 * @adapter: board private structure
3680 void e1000e_update_stats(struct e1000_adapter *adapter)
3682 struct net_device *netdev = adapter->netdev;
3683 struct e1000_hw *hw = &adapter->hw;
3684 struct pci_dev *pdev = adapter->pdev;
3688 * Prevent stats update while adapter is being reset, or if the pci
3689 * connection is down.
3691 if (adapter->link_speed == 0)
3693 if (pci_channel_offline(pdev))
3696 adapter->stats.crcerrs += er32(CRCERRS);
3697 adapter->stats.gprc += er32(GPRC);
3698 adapter->stats.gorc += er32(GORCL);
3699 er32(GORCH); /* Clear gorc */
3700 adapter->stats.bprc += er32(BPRC);
3701 adapter->stats.mprc += er32(MPRC);
3702 adapter->stats.roc += er32(ROC);
3704 adapter->stats.mpc += er32(MPC);
3705 if ((hw->phy.type == e1000_phy_82578) ||
3706 (hw->phy.type == e1000_phy_82577)) {
3707 e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
3708 if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
3709 adapter->stats.scc += phy_data;
3711 e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
3712 if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
3713 adapter->stats.ecol += phy_data;
3715 e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
3716 if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
3717 adapter->stats.mcc += phy_data;
3719 e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
3720 if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
3721 adapter->stats.latecol += phy_data;
3723 e1e_rphy(hw, HV_DC_UPPER, &phy_data);
3724 if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
3725 adapter->stats.dc += phy_data;
3727 adapter->stats.scc += er32(SCC);
3728 adapter->stats.ecol += er32(ECOL);
3729 adapter->stats.mcc += er32(MCC);
3730 adapter->stats.latecol += er32(LATECOL);
3731 adapter->stats.dc += er32(DC);
3733 adapter->stats.xonrxc += er32(XONRXC);
3734 adapter->stats.xontxc += er32(XONTXC);
3735 adapter->stats.xoffrxc += er32(XOFFRXC);
3736 adapter->stats.xofftxc += er32(XOFFTXC);
3737 adapter->stats.gptc += er32(GPTC);
3738 adapter->stats.gotc += er32(GOTCL);
3739 er32(GOTCH); /* Clear gotc */
3740 adapter->stats.rnbc += er32(RNBC);
3741 adapter->stats.ruc += er32(RUC);
3743 adapter->stats.mptc += er32(MPTC);
3744 adapter->stats.bptc += er32(BPTC);
3746 /* used for adaptive IFS */
3748 hw->mac.tx_packet_delta = er32(TPT);
3749 adapter->stats.tpt += hw->mac.tx_packet_delta;
3750 if ((hw->phy.type == e1000_phy_82578) ||
3751 (hw->phy.type == e1000_phy_82577)) {
3752 e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
3753 if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
3754 hw->mac.collision_delta = phy_data;
3756 hw->mac.collision_delta = er32(COLC);
3758 adapter->stats.colc += hw->mac.collision_delta;
3760 adapter->stats.algnerrc += er32(ALGNERRC);
3761 adapter->stats.rxerrc += er32(RXERRC);
3762 if ((hw->phy.type == e1000_phy_82578) ||
3763 (hw->phy.type == e1000_phy_82577)) {
3764 e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
3765 if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
3766 adapter->stats.tncrs += phy_data;
3768 if ((hw->mac.type != e1000_82574) &&
3769 (hw->mac.type != e1000_82583))
3770 adapter->stats.tncrs += er32(TNCRS);
3772 adapter->stats.cexterr += er32(CEXTERR);
3773 adapter->stats.tsctc += er32(TSCTC);
3774 adapter->stats.tsctfc += er32(TSCTFC);
3776 /* Fill out the OS statistics structure */
3777 netdev->stats.multicast = adapter->stats.mprc;
3778 netdev->stats.collisions = adapter->stats.colc;
3783 * RLEC on some newer hardware can be incorrect so build
3784 * our own version based on RUC and ROC
3786 netdev->stats.rx_errors = adapter->stats.rxerrc +
3787 adapter->stats.crcerrs + adapter->stats.algnerrc +
3788 adapter->stats.ruc + adapter->stats.roc +
3789 adapter->stats.cexterr;
3790 netdev->stats.rx_length_errors = adapter->stats.ruc +
3792 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3793 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3794 netdev->stats.rx_missed_errors = adapter->stats.mpc;
3797 netdev->stats.tx_errors = adapter->stats.ecol +
3798 adapter->stats.latecol;
3799 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3800 netdev->stats.tx_window_errors = adapter->stats.latecol;
3801 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3803 /* Tx Dropped needs to be maintained elsewhere */
3805 /* Management Stats */
3806 adapter->stats.mgptc += er32(MGTPTC);
3807 adapter->stats.mgprc += er32(MGTPRC);
3808 adapter->stats.mgpdc += er32(MGTPDC);
3812 * e1000_phy_read_status - Update the PHY register status snapshot
3813 * @adapter: board private structure
3815 static void e1000_phy_read_status(struct e1000_adapter *adapter)
3817 struct e1000_hw *hw = &adapter->hw;
3818 struct e1000_phy_regs *phy = &adapter->phy_regs;
3821 if ((er32(STATUS) & E1000_STATUS_LU) &&
3822 (adapter->hw.phy.media_type == e1000_media_type_copper)) {
3823 ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
3824 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
3825 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
3826 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
3827 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
3828 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
3829 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
3830 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
3832 e_warn("Error reading PHY register\n");
3835 * Do not read PHY registers if link is not up
3836 * Set values to typical power-on defaults
3838 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
3839 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
3840 BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
3842 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
3843 ADVERTISE_ALL | ADVERTISE_CSMA);
3845 phy->expansion = EXPANSION_ENABLENPAGE;
3846 phy->ctrl1000 = ADVERTISE_1000FULL;
3848 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
3852 static void e1000_print_link_info(struct e1000_adapter *adapter)
3854 struct e1000_hw *hw = &adapter->hw;
3855 u32 ctrl = er32(CTRL);
3857 /* Link status message must follow this format for user tools */
3858 printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
3859 "Flow Control: %s\n",
3860 adapter->netdev->name,
3861 adapter->link_speed,
3862 (adapter->link_duplex == FULL_DUPLEX) ?
3863 "Full Duplex" : "Half Duplex",
3864 ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
3866 ((ctrl & E1000_CTRL_RFCE) ? "RX" :
3867 ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
3870 bool e1000e_has_link(struct e1000_adapter *adapter)
3872 struct e1000_hw *hw = &adapter->hw;
3873 bool link_active = 0;
3877 * get_link_status is set on LSC (link status) interrupt or
3878 * Rx sequence error interrupt. get_link_status will stay
3879 * false until the check_for_link establishes link
3880 * for copper adapters ONLY
3882 switch (hw->phy.media_type) {
3883 case e1000_media_type_copper:
3884 if (hw->mac.get_link_status) {
3885 ret_val = hw->mac.ops.check_for_link(hw);
3886 link_active = !hw->mac.get_link_status;
3891 case e1000_media_type_fiber:
3892 ret_val = hw->mac.ops.check_for_link(hw);
3893 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
3895 case e1000_media_type_internal_serdes:
3896 ret_val = hw->mac.ops.check_for_link(hw);
3897 link_active = adapter->hw.mac.serdes_has_link;
3900 case e1000_media_type_unknown:
3904 if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
3905 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
3906 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
3907 e_info("Gigabit has been disabled, downgrading speed\n");
3913 static void e1000e_enable_receives(struct e1000_adapter *adapter)
3915 /* make sure the receive unit is started */
3916 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
3917 (adapter->flags & FLAG_RX_RESTART_NOW)) {
3918 struct e1000_hw *hw = &adapter->hw;
3919 u32 rctl = er32(RCTL);
3920 ew32(RCTL, rctl | E1000_RCTL_EN);
3921 adapter->flags &= ~FLAG_RX_RESTART_NOW;
3926 * e1000_watchdog - Timer Call-back
3927 * @data: pointer to adapter cast into an unsigned long
3929 static void e1000_watchdog(unsigned long data)
3931 struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3933 /* Do the rest outside of interrupt context */
3934 schedule_work(&adapter->watchdog_task);
3936 /* TODO: make this use queue_delayed_work() */
3939 static void e1000_watchdog_task(struct work_struct *work)
3941 struct e1000_adapter *adapter = container_of(work,
3942 struct e1000_adapter, watchdog_task);
3943 struct net_device *netdev = adapter->netdev;
3944 struct e1000_mac_info *mac = &adapter->hw.mac;
3945 struct e1000_phy_info *phy = &adapter->hw.phy;
3946 struct e1000_ring *tx_ring = adapter->tx_ring;
3947 struct e1000_hw *hw = &adapter->hw;
3951 link = e1000e_has_link(adapter);
3952 if ((netif_carrier_ok(netdev)) && link) {
3953 /* Cancel scheduled suspend requests. */
3954 pm_runtime_resume(netdev->dev.parent);
3956 e1000e_enable_receives(adapter);
3960 if ((e1000e_enable_tx_pkt_filtering(hw)) &&
3961 (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
3962 e1000_update_mng_vlan(adapter);
3965 if (!netif_carrier_ok(netdev)) {
3968 /* Cancel scheduled suspend requests. */
3969 pm_runtime_resume(netdev->dev.parent);
3971 /* update snapshot of PHY registers on LSC */
3972 e1000_phy_read_status(adapter);
3973 mac->ops.get_link_up_info(&adapter->hw,
3974 &adapter->link_speed,
3975 &adapter->link_duplex);
3976 e1000_print_link_info(adapter);
3978 * On supported PHYs, check for duplex mismatch only
3979 * if link has autonegotiated at 10/100 half
3981 if ((hw->phy.type == e1000_phy_igp_3 ||
3982 hw->phy.type == e1000_phy_bm) &&
3983 (hw->mac.autoneg == true) &&
3984 (adapter->link_speed == SPEED_10 ||
3985 adapter->link_speed == SPEED_100) &&
3986 (adapter->link_duplex == HALF_DUPLEX)) {
3989 e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
3991 if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
3992 e_info("Autonegotiated half duplex but"
3993 " link partner cannot autoneg. "
3994 " Try forcing full duplex if "
3995 "link gets many collisions.\n");
3998 /* adjust timeout factor according to speed/duplex */
3999 adapter->tx_timeout_factor = 1;
4000 switch (adapter->link_speed) {
4003 adapter->tx_timeout_factor = 16;
4007 adapter->tx_timeout_factor = 10;
4012 * workaround: re-program speed mode bit after
4015 if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
4018 tarc0 = er32(TARC(0));
4019 tarc0 &= ~SPEED_MODE_BIT;
4020 ew32(TARC(0), tarc0);
4024 * disable TSO for pcie and 10/100 speeds, to avoid
4025 * some hardware issues
4027 if (!(adapter->flags & FLAG_TSO_FORCE)) {
4028 switch (adapter->link_speed) {
4031 e_info("10/100 speed: disabling TSO\n");
4032 netdev->features &= ~NETIF_F_TSO;
4033 netdev->features &= ~NETIF_F_TSO6;
4036 netdev->features |= NETIF_F_TSO;
4037 netdev->features |= NETIF_F_TSO6;
4046 * enable transmits in the hardware, need to do this
4047 * after setting TARC(0)
4050 tctl |= E1000_TCTL_EN;
4054 * Perform any post-link-up configuration before
4055 * reporting link up.
4057 if (phy->ops.cfg_on_link_up)
4058 phy->ops.cfg_on_link_up(hw);
4060 netif_carrier_on(netdev);
4062 if (!test_bit(__E1000_DOWN, &adapter->state))
4063 mod_timer(&adapter->phy_info_timer,
4064 round_jiffies(jiffies + 2 * HZ));
4067 if (netif_carrier_ok(netdev)) {
4068 adapter->link_speed = 0;
4069 adapter->link_duplex = 0;
4070 /* Link status message must follow this format */
4071 printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
4072 adapter->netdev->name);
4073 netif_carrier_off(netdev);
4074 if (!test_bit(__E1000_DOWN, &adapter->state))
4075 mod_timer(&adapter->phy_info_timer,
4076 round_jiffies(jiffies + 2 * HZ));
4078 if (adapter->flags & FLAG_RX_NEEDS_RESTART)
4079 schedule_work(&adapter->reset_task);
4081 pm_schedule_suspend(netdev->dev.parent,
4087 e1000e_update_stats(adapter);
4089 mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
4090 adapter->tpt_old = adapter->stats.tpt;
4091 mac->collision_delta = adapter->stats.colc - adapter->colc_old;
4092 adapter->colc_old = adapter->stats.colc;
4094 adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
4095 adapter->gorc_old = adapter->stats.gorc;
4096 adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
4097 adapter->gotc_old = adapter->stats.gotc;
4099 e1000e_update_adaptive(&adapter->hw);
4101 if (!netif_carrier_ok(netdev)) {
4102 tx_pending = (e1000_desc_unused(tx_ring) + 1 <
4106 * We've lost link, so the controller stops DMA,
4107 * but we've got queued Tx work that's never going
4108 * to get done, so reset controller to flush Tx.
4109 * (Do the reset outside of interrupt context).
4111 adapter->tx_timeout_count++;
4112 schedule_work(&adapter->reset_task);
4113 /* return immediately since reset is imminent */
4118 /* Simple mode for Interrupt Throttle Rate (ITR) */
4119 if (adapter->itr_setting == 4) {
4121 * Symmetric Tx/Rx gets a reduced ITR=2000;
4122 * Total asymmetrical Tx or Rx gets ITR=8000;
4123 * everyone else is between 2000-8000.
4125 u32 goc = (adapter->gotc + adapter->gorc) / 10000;
4126 u32 dif = (adapter->gotc > adapter->gorc ?
4127 adapter->gotc - adapter->gorc :
4128 adapter->gorc - adapter->gotc) / 10000;
4129 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
4131 ew32(ITR, 1000000000 / (itr * 256));
4134 /* Cause software interrupt to ensure Rx ring is cleaned */
4135 if (adapter->msix_entries)
4136 ew32(ICS, adapter->rx_ring->ims_val);
4138 ew32(ICS, E1000_ICS_RXDMT0);
4140 /* Force detection of hung controller every watchdog period */
4141 adapter->detect_tx_hung = 1;
4144 * With 82571 controllers, LAA may be overwritten due to controller
4145 * reset from the other port. Set the appropriate LAA in RAR[0]
4147 if (e1000e_get_laa_state_82571(hw))
4148 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
4150 /* Reset the timer */
4151 if (!test_bit(__E1000_DOWN, &adapter->state))
4152 mod_timer(&adapter->watchdog_timer,
4153 round_jiffies(jiffies + 2 * HZ));
4156 #define E1000_TX_FLAGS_CSUM 0x00000001
4157 #define E1000_TX_FLAGS_VLAN 0x00000002
4158 #define E1000_TX_FLAGS_TSO 0x00000004
4159 #define E1000_TX_FLAGS_IPV4 0x00000008
4160 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
4161 #define E1000_TX_FLAGS_VLAN_SHIFT 16
4163 static int e1000_tso(struct e1000_adapter *adapter,
4164 struct sk_buff *skb)
4166 struct e1000_ring *tx_ring = adapter->tx_ring;
4167 struct e1000_context_desc *context_desc;
4168 struct e1000_buffer *buffer_info;
4171 u16 ipcse = 0, tucse, mss;
4172 u8 ipcss, ipcso, tucss, tucso, hdr_len;
4175 if (!skb_is_gso(skb))
4178 if (skb_header_cloned(skb)) {
4179 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
4184 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4185 mss = skb_shinfo(skb)->gso_size;
4186 if (skb->protocol == htons(ETH_P_IP)) {
4187 struct iphdr *iph = ip_hdr(skb);
4190 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
4192 cmd_length = E1000_TXD_CMD_IP;
4193 ipcse = skb_transport_offset(skb) - 1;
4194 } else if (skb_is_gso_v6(skb)) {
4195 ipv6_hdr(skb)->payload_len = 0;
4196 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
4197 &ipv6_hdr(skb)->daddr,
4201 ipcss = skb_network_offset(skb);
4202 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
4203 tucss = skb_transport_offset(skb);
4204 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
4207 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
4208 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
4210 i = tx_ring->next_to_use;
4211 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4212 buffer_info = &tx_ring->buffer_info[i];
4214 context_desc->lower_setup.ip_fields.ipcss = ipcss;
4215 context_desc->lower_setup.ip_fields.ipcso = ipcso;
4216 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
4217 context_desc->upper_setup.tcp_fields.tucss = tucss;
4218 context_desc->upper_setup.tcp_fields.tucso = tucso;
4219 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
4220 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
4221 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
4222 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
4224 buffer_info->time_stamp = jiffies;
4225 buffer_info->next_to_watch = i;
4228 if (i == tx_ring->count)
4230 tx_ring->next_to_use = i;
4235 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
4237 struct e1000_ring *tx_ring = adapter->tx_ring;
4238 struct e1000_context_desc *context_desc;
4239 struct e1000_buffer *buffer_info;
4242 u32 cmd_len = E1000_TXD_CMD_DEXT;
4245 if (skb->ip_summed != CHECKSUM_PARTIAL)
4248 if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
4249 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
4251 protocol = skb->protocol;
4254 case cpu_to_be16(ETH_P_IP):
4255 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
4256 cmd_len |= E1000_TXD_CMD_TCP;
4258 case cpu_to_be16(ETH_P_IPV6):
4259 /* XXX not handling all IPV6 headers */
4260 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
4261 cmd_len |= E1000_TXD_CMD_TCP;
4264 if (unlikely(net_ratelimit()))
4265 e_warn("checksum_partial proto=%x!\n",
4266 be16_to_cpu(protocol));
4270 css = skb_transport_offset(skb);
4272 i = tx_ring->next_to_use;
4273 buffer_info = &tx_ring->buffer_info[i];
4274 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
4276 context_desc->lower_setup.ip_config = 0;
4277 context_desc->upper_setup.tcp_fields.tucss = css;
4278 context_desc->upper_setup.tcp_fields.tucso =
4279 css + skb->csum_offset;
4280 context_desc->upper_setup.tcp_fields.tucse = 0;
4281 context_desc->tcp_seg_setup.data = 0;
4282 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
4284 buffer_info->time_stamp = jiffies;
4285 buffer_info->next_to_watch = i;
4288 if (i == tx_ring->count)
4290 tx_ring->next_to_use = i;
4295 #define E1000_MAX_PER_TXD 8192
4296 #define E1000_MAX_TXD_PWR 12
4298 static int e1000_tx_map(struct e1000_adapter *adapter,
4299 struct sk_buff *skb, unsigned int first,
4300 unsigned int max_per_txd, unsigned int nr_frags,
4303 struct e1000_ring *tx_ring = adapter->tx_ring;
4304 struct pci_dev *pdev = adapter->pdev;
4305 struct e1000_buffer *buffer_info;
4306 unsigned int len = skb_headlen(skb);
4307 unsigned int offset = 0, size, count = 0, i;
4308 unsigned int f, bytecount, segs;
4310 i = tx_ring->next_to_use;
4313 buffer_info = &tx_ring->buffer_info[i];
4314 size = min(len, max_per_txd);
4316 buffer_info->length = size;
4317 buffer_info->time_stamp = jiffies;
4318 buffer_info->next_to_watch = i;
4319 buffer_info->dma = dma_map_single(&pdev->dev,
4321 size, DMA_TO_DEVICE);
4322 buffer_info->mapped_as_page = false;
4323 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4332 if (i == tx_ring->count)
4337 for (f = 0; f < nr_frags; f++) {
4338 struct skb_frag_struct *frag;
4340 frag = &skb_shinfo(skb)->frags[f];
4342 offset = frag->page_offset;
4346 if (i == tx_ring->count)
4349 buffer_info = &tx_ring->buffer_info[i];
4350 size = min(len, max_per_txd);
4352 buffer_info->length = size;
4353 buffer_info->time_stamp = jiffies;
4354 buffer_info->next_to_watch = i;
4355 buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
4358 buffer_info->mapped_as_page = true;
4359 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
4368 segs = skb_shinfo(skb)->gso_segs ?: 1;
4369 /* multiply data chunks by size of headers */
4370 bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
4372 tx_ring->buffer_info[i].skb = skb;
4373 tx_ring->buffer_info[i].segs = segs;
4374 tx_ring->buffer_info[i].bytecount = bytecount;
4375 tx_ring->buffer_info[first].next_to_watch = i;
4380 dev_err(&pdev->dev, "TX DMA map failed\n");
4381 buffer_info->dma = 0;
4387 i += tx_ring->count;
4389 buffer_info = &tx_ring->buffer_info[i];
4390 e1000_put_txbuf(adapter, buffer_info);;
4396 static void e1000_tx_queue(struct e1000_adapter *adapter,
4397 int tx_flags, int count)
4399 struct e1000_ring *tx_ring = adapter->tx_ring;
4400 struct e1000_tx_desc *tx_desc = NULL;
4401 struct e1000_buffer *buffer_info;
4402 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
4405 if (tx_flags & E1000_TX_FLAGS_TSO) {
4406 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
4408 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4410 if (tx_flags & E1000_TX_FLAGS_IPV4)
4411 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
4414 if (tx_flags & E1000_TX_FLAGS_CSUM) {
4415 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
4416 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
4419 if (tx_flags & E1000_TX_FLAGS_VLAN) {
4420 txd_lower |= E1000_TXD_CMD_VLE;
4421 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
4424 i = tx_ring->next_to_use;
4427 buffer_info = &tx_ring->buffer_info[i];
4428 tx_desc = E1000_TX_DESC(*tx_ring, i);
4429 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4430 tx_desc->lower.data =
4431 cpu_to_le32(txd_lower | buffer_info->length);
4432 tx_desc->upper.data = cpu_to_le32(txd_upper);
4435 if (i == tx_ring->count)
4439 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
4442 * Force memory writes to complete before letting h/w
4443 * know there are new descriptors to fetch. (Only
4444 * applicable for weak-ordered memory model archs,
4449 tx_ring->next_to_use = i;
4450 writel(i, adapter->hw.hw_addr + tx_ring->tail);
4452 * we need this if more than one processor can write to our tail
4453 * at a time, it synchronizes IO on IA64/Altix systems
4458 #define MINIMUM_DHCP_PACKET_SIZE 282
4459 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
4460 struct sk_buff *skb)
4462 struct e1000_hw *hw = &adapter->hw;
4465 if (vlan_tx_tag_present(skb)) {
4466 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
4467 (adapter->hw.mng_cookie.status &
4468 E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
4472 if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
4475 if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
4479 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
4482 if (ip->protocol != IPPROTO_UDP)
4485 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
4486 if (ntohs(udp->dest) != 67)
4489 offset = (u8 *)udp + 8 - skb->data;
4490 length = skb->len - offset;
4491 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
4497 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
4499 struct e1000_adapter *adapter = netdev_priv(netdev);
4501 netif_stop_queue(netdev);
4503 * Herbert's original patch had:
4504 * smp_mb__after_netif_stop_queue();
4505 * but since that doesn't exist yet, just open code it.
4510 * We need to check again in a case another CPU has just
4511 * made room available.
4513 if (e1000_desc_unused(adapter->tx_ring) < size)
4517 netif_start_queue(netdev);
4518 ++adapter->restart_queue;
4522 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
4524 struct e1000_adapter *adapter = netdev_priv(netdev);
4526 if (e1000_desc_unused(adapter->tx_ring) >= size)
4528 return __e1000_maybe_stop_tx(netdev, size);
4531 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
4532 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
4533 struct net_device *netdev)
4535 struct e1000_adapter *adapter = netdev_priv(netdev);
4536 struct e1000_ring *tx_ring = adapter->tx_ring;
4538 unsigned int max_per_txd = E1000_MAX_PER_TXD;
4539 unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
4540 unsigned int tx_flags = 0;
4541 unsigned int len = skb_headlen(skb);
4542 unsigned int nr_frags;
4548 if (test_bit(__E1000_DOWN, &adapter->state)) {
4549 dev_kfree_skb_any(skb);
4550 return NETDEV_TX_OK;
4553 if (skb->len <= 0) {
4554 dev_kfree_skb_any(skb);
4555 return NETDEV_TX_OK;
4558 mss = skb_shinfo(skb)->gso_size;
4560 * The controller does a simple calculation to
4561 * make sure there is enough room in the FIFO before
4562 * initiating the DMA for each buffer. The calc is:
4563 * 4 = ceil(buffer len/mss). To make sure we don't
4564 * overrun the FIFO, adjust the max buffer len if mss
4569 max_per_txd = min(mss << 2, max_per_txd);
4570 max_txd_pwr = fls(max_per_txd) - 1;
4573 * TSO Workaround for 82571/2/3 Controllers -- if skb->data
4574 * points to just header, pull a few bytes of payload from
4575 * frags into skb->data
4577 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
4579 * we do this workaround for ES2LAN, but it is un-necessary,
4580 * avoiding it could save a lot of cycles
4582 if (skb->data_len && (hdr_len == len)) {
4583 unsigned int pull_size;
4585 pull_size = min((unsigned int)4, skb->data_len);
4586 if (!__pskb_pull_tail(skb, pull_size)) {
4587 e_err("__pskb_pull_tail failed.\n");
4588 dev_kfree_skb_any(skb);
4589 return NETDEV_TX_OK;
4591 len = skb_headlen(skb);
4595 /* reserve a descriptor for the offload context */
4596 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
4600 count += TXD_USE_COUNT(len, max_txd_pwr);
4602 nr_frags = skb_shinfo(skb)->nr_frags;
4603 for (f = 0; f < nr_frags; f++)
4604 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
4607 if (adapter->hw.mac.tx_pkt_filtering)
4608 e1000_transfer_dhcp_info(adapter, skb);
4611 * need: count + 2 desc gap to keep tail from touching
4612 * head, otherwise try next time
4614 if (e1000_maybe_stop_tx(netdev, count + 2))
4615 return NETDEV_TX_BUSY;
4617 if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
4618 tx_flags |= E1000_TX_FLAGS_VLAN;
4619 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
4622 first = tx_ring->next_to_use;
4624 tso = e1000_tso(adapter, skb);
4626 dev_kfree_skb_any(skb);
4627 return NETDEV_TX_OK;
4631 tx_flags |= E1000_TX_FLAGS_TSO;
4632 else if (e1000_tx_csum(adapter, skb))
4633 tx_flags |= E1000_TX_FLAGS_CSUM;
4636 * Old method was to assume IPv4 packet by default if TSO was enabled.
4637 * 82571 hardware supports TSO capabilities for IPv6 as well...
4638 * no longer assume, we must.
4640 if (skb->protocol == htons(ETH_P_IP))
4641 tx_flags |= E1000_TX_FLAGS_IPV4;
4643 /* if count is 0 then mapping error has occured */
4644 count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
4646 e1000_tx_queue(adapter, tx_flags, count);
4647 /* Make sure there is space in the ring for the next send. */
4648 e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
4651 dev_kfree_skb_any(skb);
4652 tx_ring->buffer_info[first].time_stamp = 0;
4653 tx_ring->next_to_use = first;
4656 return NETDEV_TX_OK;
4660 * e1000_tx_timeout - Respond to a Tx Hang
4661 * @netdev: network interface device structure
4663 static void e1000_tx_timeout(struct net_device *netdev)
4665 struct e1000_adapter *adapter = netdev_priv(netdev);
4667 /* Do the reset outside of interrupt context */
4668 adapter->tx_timeout_count++;
4669 schedule_work(&adapter->reset_task);
4672 static void e1000_reset_task(struct work_struct *work)
4674 struct e1000_adapter *adapter;
4675 adapter = container_of(work, struct e1000_adapter, reset_task);
4677 e1000e_dump(adapter);
4678 e_err("Reset adapter\n");
4679 e1000e_reinit_locked(adapter);
4683 * e1000_get_stats - Get System Network Statistics
4684 * @netdev: network interface device structure
4686 * Returns the address of the device statistics structure.
4687 * The statistics are actually updated from the timer callback.
4689 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
4691 /* only return the current stats */
4692 return &netdev->stats;
4696 * e1000_change_mtu - Change the Maximum Transfer Unit
4697 * @netdev: network interface device structure
4698 * @new_mtu: new value for maximum frame size
4700 * Returns 0 on success, negative on failure
4702 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
4704 struct e1000_adapter *adapter = netdev_priv(netdev);
4705 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
4707 /* Jumbo frame support */
4708 if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
4709 !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
4710 e_err("Jumbo Frames not supported.\n");
4714 /* Supported frame sizes */
4715 if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
4716 (max_frame > adapter->max_hw_frame_size)) {
4717 e_err("Unsupported MTU setting\n");
4721 /* 82573 Errata 17 */
4722 if (((adapter->hw.mac.type == e1000_82573) ||
4723 (adapter->hw.mac.type == e1000_82574)) &&
4724 (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
4725 adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
4726 e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
4729 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4731 /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
4732 adapter->max_frame_size = max_frame;
4733 e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
4734 netdev->mtu = new_mtu;
4735 if (netif_running(netdev))
4736 e1000e_down(adapter);
4739 * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4740 * means we reserve 2 more, this pushes us to allocate from the next
4742 * i.e. RXBUFFER_2048 --> size-4096 slab
4743 * However with the new *_jumbo_rx* routines, jumbo receives will use
4747 if (max_frame <= 2048)
4748 adapter->rx_buffer_len = 2048;
4750 adapter->rx_buffer_len = 4096;
4752 /* adjust allocation if LPE protects us, and we aren't using SBP */
4753 if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
4754 (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
4755 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
4758 if (netif_running(netdev))
4761 e1000e_reset(adapter);
4763 clear_bit(__E1000_RESETTING, &adapter->state);
4768 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4771 struct e1000_adapter *adapter = netdev_priv(netdev);
4772 struct mii_ioctl_data *data = if_mii(ifr);
4774 if (adapter->hw.phy.media_type != e1000_media_type_copper)
4779 data->phy_id = adapter->hw.phy.addr;
4782 e1000_phy_read_status(adapter);
4784 switch (data->reg_num & 0x1F) {
4786 data->val_out = adapter->phy_regs.bmcr;
4789 data->val_out = adapter->phy_regs.bmsr;
4792 data->val_out = (adapter->hw.phy.id >> 16);
4795 data->val_out = (adapter->hw.phy.id & 0xFFFF);
4798 data->val_out = adapter->phy_regs.advertise;
4801 data->val_out = adapter->phy_regs.lpa;
4804 data->val_out = adapter->phy_regs.expansion;
4807 data->val_out = adapter->phy_regs.ctrl1000;
4810 data->val_out = adapter->phy_regs.stat1000;
4813 data->val_out = adapter->phy_regs.estatus;
4826 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4832 return e1000_mii_ioctl(netdev, ifr, cmd);
4838 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
4840 struct e1000_hw *hw = &adapter->hw;
4845 /* copy MAC RARs to PHY RARs */
4846 for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
4847 mac_reg = er32(RAL(i));
4848 e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
4849 e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
4850 mac_reg = er32(RAH(i));
4851 e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
4852 e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
4855 /* copy MAC MTA to PHY MTA */
4856 for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
4857 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
4858 e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
4859 e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
4862 /* configure PHY Rx Control register */
4863 e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
4864 mac_reg = er32(RCTL);
4865 if (mac_reg & E1000_RCTL_UPE)
4866 phy_reg |= BM_RCTL_UPE;
4867 if (mac_reg & E1000_RCTL_MPE)
4868 phy_reg |= BM_RCTL_MPE;
4869 phy_reg &= ~(BM_RCTL_MO_MASK);
4870 if (mac_reg & E1000_RCTL_MO_3)
4871 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
4872 << BM_RCTL_MO_SHIFT);
4873 if (mac_reg & E1000_RCTL_BAM)
4874 phy_reg |= BM_RCTL_BAM;
4875 if (mac_reg & E1000_RCTL_PMCF)
4876 phy_reg |= BM_RCTL_PMCF;
4877 mac_reg = er32(CTRL);
4878 if (mac_reg & E1000_CTRL_RFCE)
4879 phy_reg |= BM_RCTL_RFCE;
4880 e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
4882 /* enable PHY wakeup in MAC register */
4884 ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
4886 /* configure and enable PHY wakeup in PHY registers */
4887 e1e_wphy(&adapter->hw, BM_WUFC, wufc);
4888 e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
4890 /* activate PHY wakeup */
4891 retval = hw->phy.ops.acquire(hw);
4893 e_err("Could not acquire PHY\n");
4896 e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4897 (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
4898 retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
4900 e_err("Could not read PHY page 769\n");
4903 phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
4904 retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
4906 e_err("Could not set PHY Host Wakeup bit\n");
4908 hw->phy.ops.release(hw);
4913 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
4916 struct net_device *netdev = pci_get_drvdata(pdev);
4917 struct e1000_adapter *adapter = netdev_priv(netdev);
4918 struct e1000_hw *hw = &adapter->hw;
4919 u32 ctrl, ctrl_ext, rctl, status;
4920 /* Runtime suspend should only enable wakeup for link changes */
4921 u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
4924 netif_device_detach(netdev);
4926 if (netif_running(netdev)) {
4927 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4928 e1000e_down(adapter);
4929 e1000_free_irq(adapter);
4931 e1000e_reset_interrupt_capability(adapter);
4933 retval = pci_save_state(pdev);
4937 status = er32(STATUS);
4938 if (status & E1000_STATUS_LU)
4939 wufc &= ~E1000_WUFC_LNKC;
4942 e1000_setup_rctl(adapter);
4943 e1000_set_multi(netdev);
4945 /* turn on all-multi mode if wake on multicast is enabled */
4946 if (wufc & E1000_WUFC_MC) {
4948 rctl |= E1000_RCTL_MPE;
4953 /* advertise wake from D3Cold */
4954 #define E1000_CTRL_ADVD3WUC 0x00100000
4955 /* phy power management enable */
4956 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4957 ctrl |= E1000_CTRL_ADVD3WUC;
4958 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
4959 ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
4962 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
4963 adapter->hw.phy.media_type ==
4964 e1000_media_type_internal_serdes) {
4965 /* keep the laser running in D3 */
4966 ctrl_ext = er32(CTRL_EXT);
4967 ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
4968 ew32(CTRL_EXT, ctrl_ext);
4971 if (adapter->flags & FLAG_IS_ICH)
4972 e1000e_disable_gig_wol_ich8lan(&adapter->hw);
4974 /* Allow time for pending master requests to run */
4975 e1000e_disable_pcie_master(&adapter->hw);
4977 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
4978 /* enable wakeup by the PHY */
4979 retval = e1000_init_phy_wakeup(adapter, wufc);
4983 /* enable wakeup by the MAC */
4985 ew32(WUC, E1000_WUC_PME_EN);
4992 *enable_wake = !!wufc;
4994 /* make sure adapter isn't asleep if manageability is enabled */
4995 if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
4996 (hw->mac.ops.check_mng_mode(hw)))
4997 *enable_wake = true;
4999 if (adapter->hw.phy.type == e1000_phy_igp_3)
5000 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
5003 * Release control of h/w to f/w. If f/w is AMT enabled, this
5004 * would have already happened in close and is redundant.
5006 e1000_release_hw_control(adapter);
5008 pci_disable_device(pdev);
5013 static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
5015 if (sleep && wake) {
5016 pci_prepare_to_sleep(pdev);
5020 pci_wake_from_d3(pdev, wake);
5021 pci_set_power_state(pdev, PCI_D3hot);
5024 static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
5027 struct net_device *netdev = pci_get_drvdata(pdev);
5028 struct e1000_adapter *adapter = netdev_priv(netdev);
5031 * The pci-e switch on some quad port adapters will report a
5032 * correctable error when the MAC transitions from D0 to D3. To
5033 * prevent this we need to mask off the correctable errors on the
5034 * downstream port of the pci-e switch.
5036 if (adapter->flags & FLAG_IS_QUAD_PORT) {
5037 struct pci_dev *us_dev = pdev->bus->self;
5038 int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
5041 pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
5042 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
5043 (devctl & ~PCI_EXP_DEVCTL_CERE));
5045 e1000_power_off(pdev, sleep, wake);
5047 pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
5049 e1000_power_off(pdev, sleep, wake);
5053 #ifdef CONFIG_PCIEASPM
5054 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5056 pci_disable_link_state(pdev, state);
5059 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5065 * Both device and parent should have the same ASPM setting.
5066 * Disable ASPM in downstream component first and then upstream.
5068 pos = pci_pcie_cap(pdev);
5069 pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
5071 pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
5073 if (!pdev->bus->self)
5076 pos = pci_pcie_cap(pdev->bus->self);
5077 pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16);
5079 pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
5082 void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
5084 dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
5085 (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
5086 (state & PCIE_LINK_STATE_L1) ? "L1" : "");
5088 __e1000e_disable_aspm(pdev, state);
5091 #ifdef CONFIG_PM_OPS
5092 static bool e1000e_pm_ready(struct e1000_adapter *adapter)
5094 return !!adapter->tx_ring->buffer_info;
5097 static int __e1000_resume(struct pci_dev *pdev)
5099 struct net_device *netdev = pci_get_drvdata(pdev);
5100 struct e1000_adapter *adapter = netdev_priv(netdev);
5101 struct e1000_hw *hw = &adapter->hw;
5104 pci_set_power_state(pdev, PCI_D0);
5105 pci_restore_state(pdev);
5106 pci_save_state(pdev);
5107 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5108 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5110 e1000e_set_interrupt_capability(adapter);
5111 if (netif_running(netdev)) {
5112 err = e1000_request_irq(adapter);
5117 e1000e_power_up_phy(adapter);
5119 /* report the system wakeup cause from S3/S4 */
5120 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
5123 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
5125 e_info("PHY Wakeup cause - %s\n",
5126 phy_data & E1000_WUS_EX ? "Unicast Packet" :
5127 phy_data & E1000_WUS_MC ? "Multicast Packet" :
5128 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
5129 phy_data & E1000_WUS_MAG ? "Magic Packet" :
5130 phy_data & E1000_WUS_LNKC ? "Link Status "
5131 " Change" : "other");
5133 e1e_wphy(&adapter->hw, BM_WUS, ~0);
5135 u32 wus = er32(WUS);
5137 e_info("MAC Wakeup cause - %s\n",
5138 wus & E1000_WUS_EX ? "Unicast Packet" :
5139 wus & E1000_WUS_MC ? "Multicast Packet" :
5140 wus & E1000_WUS_BC ? "Broadcast Packet" :
5141 wus & E1000_WUS_MAG ? "Magic Packet" :
5142 wus & E1000_WUS_LNKC ? "Link Status Change" :
5148 e1000e_reset(adapter);
5150 e1000_init_manageability_pt(adapter);
5152 if (netif_running(netdev))
5155 netif_device_attach(netdev);
5158 * If the controller has AMT, do not set DRV_LOAD until the interface
5159 * is up. For all other cases, let the f/w know that the h/w is now
5160 * under the control of the driver.
5162 if (!(adapter->flags & FLAG_HAS_AMT))
5163 e1000_get_hw_control(adapter);
5168 #ifdef CONFIG_PM_SLEEP
5169 static int e1000_suspend(struct device *dev)
5171 struct pci_dev *pdev = to_pci_dev(dev);
5175 retval = __e1000_shutdown(pdev, &wake, false);
5177 e1000_complete_shutdown(pdev, true, wake);
5182 static int e1000_resume(struct device *dev)
5184 struct pci_dev *pdev = to_pci_dev(dev);
5185 struct net_device *netdev = pci_get_drvdata(pdev);
5186 struct e1000_adapter *adapter = netdev_priv(netdev);
5188 if (e1000e_pm_ready(adapter))
5189 adapter->idle_check = true;
5191 return __e1000_resume(pdev);
5193 #endif /* CONFIG_PM_SLEEP */
5195 #ifdef CONFIG_PM_RUNTIME
5196 static int e1000_runtime_suspend(struct device *dev)
5198 struct pci_dev *pdev = to_pci_dev(dev);
5199 struct net_device *netdev = pci_get_drvdata(pdev);
5200 struct e1000_adapter *adapter = netdev_priv(netdev);
5202 if (e1000e_pm_ready(adapter)) {
5205 __e1000_shutdown(pdev, &wake, true);
5211 static int e1000_idle(struct device *dev)
5213 struct pci_dev *pdev = to_pci_dev(dev);
5214 struct net_device *netdev = pci_get_drvdata(pdev);
5215 struct e1000_adapter *adapter = netdev_priv(netdev);
5217 if (!e1000e_pm_ready(adapter))
5220 if (adapter->idle_check) {
5221 adapter->idle_check = false;
5222 if (!e1000e_has_link(adapter))
5223 pm_schedule_suspend(dev, MSEC_PER_SEC);
5229 static int e1000_runtime_resume(struct device *dev)
5231 struct pci_dev *pdev = to_pci_dev(dev);
5232 struct net_device *netdev = pci_get_drvdata(pdev);
5233 struct e1000_adapter *adapter = netdev_priv(netdev);
5235 if (!e1000e_pm_ready(adapter))
5238 adapter->idle_check = !dev->power.runtime_auto;
5239 return __e1000_resume(pdev);
5241 #endif /* CONFIG_PM_RUNTIME */
5242 #endif /* CONFIG_PM_OPS */
5244 static void e1000_shutdown(struct pci_dev *pdev)
5248 __e1000_shutdown(pdev, &wake, false);
5250 if (system_state == SYSTEM_POWER_OFF)
5251 e1000_complete_shutdown(pdev, false, wake);
5254 #ifdef CONFIG_NET_POLL_CONTROLLER
5256 * Polling 'interrupt' - used by things like netconsole to send skbs
5257 * without having to re-enable interrupts. It's not called while
5258 * the interrupt routine is executing.
5260 static void e1000_netpoll(struct net_device *netdev)
5262 struct e1000_adapter *adapter = netdev_priv(netdev);
5264 disable_irq(adapter->pdev->irq);
5265 e1000_intr(adapter->pdev->irq, netdev);
5267 enable_irq(adapter->pdev->irq);
5272 * e1000_io_error_detected - called when PCI error is detected
5273 * @pdev: Pointer to PCI device
5274 * @state: The current pci connection state
5276 * This function is called after a PCI bus error affecting
5277 * this device has been detected.
5279 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
5280 pci_channel_state_t state)
5282 struct net_device *netdev = pci_get_drvdata(pdev);
5283 struct e1000_adapter *adapter = netdev_priv(netdev);
5285 netif_device_detach(netdev);
5287 if (state == pci_channel_io_perm_failure)
5288 return PCI_ERS_RESULT_DISCONNECT;
5290 if (netif_running(netdev))
5291 e1000e_down(adapter);
5292 pci_disable_device(pdev);
5294 /* Request a slot slot reset. */
5295 return PCI_ERS_RESULT_NEED_RESET;
5299 * e1000_io_slot_reset - called after the pci bus has been reset.
5300 * @pdev: Pointer to PCI device
5302 * Restart the card from scratch, as if from a cold-boot. Implementation
5303 * resembles the first-half of the e1000_resume routine.
5305 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5307 struct net_device *netdev = pci_get_drvdata(pdev);
5308 struct e1000_adapter *adapter = netdev_priv(netdev);
5309 struct e1000_hw *hw = &adapter->hw;
5311 pci_ers_result_t result;
5313 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
5314 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5315 err = pci_enable_device_mem(pdev);
5318 "Cannot re-enable PCI device after reset.\n");
5319 result = PCI_ERS_RESULT_DISCONNECT;
5321 pci_set_master(pdev);
5322 pdev->state_saved = true;
5323 pci_restore_state(pdev);
5325 pci_enable_wake(pdev, PCI_D3hot, 0);
5326 pci_enable_wake(pdev, PCI_D3cold, 0);
5328 e1000e_reset(adapter);
5330 result = PCI_ERS_RESULT_RECOVERED;
5333 pci_cleanup_aer_uncorrect_error_status(pdev);
5339 * e1000_io_resume - called when traffic can start flowing again.
5340 * @pdev: Pointer to PCI device
5342 * This callback is called when the error recovery driver tells us that
5343 * its OK to resume normal operation. Implementation resembles the
5344 * second-half of the e1000_resume routine.
5346 static void e1000_io_resume(struct pci_dev *pdev)
5348 struct net_device *netdev = pci_get_drvdata(pdev);
5349 struct e1000_adapter *adapter = netdev_priv(netdev);
5351 e1000_init_manageability_pt(adapter);
5353 if (netif_running(netdev)) {
5354 if (e1000e_up(adapter)) {
5356 "can't bring device back up after reset\n");
5361 netif_device_attach(netdev);
5364 * If the controller has AMT, do not set DRV_LOAD until the interface
5365 * is up. For all other cases, let the f/w know that the h/w is now
5366 * under the control of the driver.
5368 if (!(adapter->flags & FLAG_HAS_AMT))
5369 e1000_get_hw_control(adapter);
5373 static void e1000_print_device_info(struct e1000_adapter *adapter)
5375 struct e1000_hw *hw = &adapter->hw;
5376 struct net_device *netdev = adapter->netdev;
5379 /* print bus type/speed/width info */
5380 e_info("(PCI Express:2.5GB/s:%s) %pM\n",
5382 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
5386 e_info("Intel(R) PRO/%s Network Connection\n",
5387 (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
5388 e1000e_read_pba_num(hw, &pba_num);
5389 e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
5390 hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
5393 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
5395 struct e1000_hw *hw = &adapter->hw;
5399 if (hw->mac.type != e1000_82573)
5402 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
5403 if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
5404 /* Deep Smart Power Down (DSPD) */
5405 dev_warn(&adapter->pdev->dev,
5406 "Warning: detected DSPD enabled in EEPROM\n");
5410 static const struct net_device_ops e1000e_netdev_ops = {
5411 .ndo_open = e1000_open,
5412 .ndo_stop = e1000_close,
5413 .ndo_start_xmit = e1000_xmit_frame,
5414 .ndo_get_stats = e1000_get_stats,
5415 .ndo_set_multicast_list = e1000_set_multi,
5416 .ndo_set_mac_address = e1000_set_mac,
5417 .ndo_change_mtu = e1000_change_mtu,
5418 .ndo_do_ioctl = e1000_ioctl,
5419 .ndo_tx_timeout = e1000_tx_timeout,
5420 .ndo_validate_addr = eth_validate_addr,
5422 .ndo_vlan_rx_register = e1000_vlan_rx_register,
5423 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
5424 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
5425 #ifdef CONFIG_NET_POLL_CONTROLLER
5426 .ndo_poll_controller = e1000_netpoll,
5431 * e1000_probe - Device Initialization Routine
5432 * @pdev: PCI device information struct
5433 * @ent: entry in e1000_pci_tbl
5435 * Returns 0 on success, negative on failure
5437 * e1000_probe initializes an adapter identified by a pci_dev structure.
5438 * The OS initialization, configuring of the adapter private structure,
5439 * and a hardware reset occur.
5441 static int __devinit e1000_probe(struct pci_dev *pdev,
5442 const struct pci_device_id *ent)
5444 struct net_device *netdev;
5445 struct e1000_adapter *adapter;
5446 struct e1000_hw *hw;
5447 const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
5448 resource_size_t mmio_start, mmio_len;
5449 resource_size_t flash_start, flash_len;
5451 static int cards_found;
5452 int i, err, pci_using_dac;
5453 u16 eeprom_data = 0;
5454 u16 eeprom_apme_mask = E1000_EEPROM_APME;
5456 if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
5457 e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
5459 err = pci_enable_device_mem(pdev);
5464 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
5466 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
5470 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
5472 err = dma_set_coherent_mask(&pdev->dev,
5475 dev_err(&pdev->dev, "No usable DMA "
5476 "configuration, aborting\n");
5482 err = pci_request_selected_regions_exclusive(pdev,
5483 pci_select_bars(pdev, IORESOURCE_MEM),
5484 e1000e_driver_name);
5488 /* AER (Advanced Error Reporting) hooks */
5489 pci_enable_pcie_error_reporting(pdev);
5491 pci_set_master(pdev);
5492 /* PCI config space info */
5493 err = pci_save_state(pdev);
5495 goto err_alloc_etherdev;
5498 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
5500 goto err_alloc_etherdev;
5502 SET_NETDEV_DEV(netdev, &pdev->dev);
5504 netdev->irq = pdev->irq;
5506 pci_set_drvdata(pdev, netdev);
5507 adapter = netdev_priv(netdev);
5509 adapter->netdev = netdev;
5510 adapter->pdev = pdev;
5512 adapter->pba = ei->pba;
5513 adapter->flags = ei->flags;
5514 adapter->flags2 = ei->flags2;
5515 adapter->hw.adapter = adapter;
5516 adapter->hw.mac.type = ei->mac;
5517 adapter->max_hw_frame_size = ei->max_hw_frame_size;
5518 adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
5520 mmio_start = pci_resource_start(pdev, 0);
5521 mmio_len = pci_resource_len(pdev, 0);
5524 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
5525 if (!adapter->hw.hw_addr)
5528 if ((adapter->flags & FLAG_HAS_FLASH) &&
5529 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
5530 flash_start = pci_resource_start(pdev, 1);
5531 flash_len = pci_resource_len(pdev, 1);
5532 adapter->hw.flash_address = ioremap(flash_start, flash_len);
5533 if (!adapter->hw.flash_address)
5537 /* construct the net_device struct */
5538 netdev->netdev_ops = &e1000e_netdev_ops;
5539 e1000e_set_ethtool_ops(netdev);
5540 netdev->watchdog_timeo = 5 * HZ;
5541 netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
5542 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
5544 netdev->mem_start = mmio_start;
5545 netdev->mem_end = mmio_start + mmio_len;
5547 adapter->bd_number = cards_found++;
5549 e1000e_check_options(adapter);
5551 /* setup adapter struct */
5552 err = e1000_sw_init(adapter);
5558 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
5559 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
5560 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
5562 err = ei->get_variants(adapter);
5566 if ((adapter->flags & FLAG_IS_ICH) &&
5567 (adapter->flags & FLAG_READ_ONLY_NVM))
5568 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
5570 hw->mac.ops.get_bus_info(&adapter->hw);
5572 adapter->hw.phy.autoneg_wait_to_complete = 0;
5574 /* Copper options */
5575 if (adapter->hw.phy.media_type == e1000_media_type_copper) {
5576 adapter->hw.phy.mdix = AUTO_ALL_MODES;
5577 adapter->hw.phy.disable_polarity_correction = 0;
5578 adapter->hw.phy.ms_type = e1000_ms_hw_default;
5581 if (e1000_check_reset_block(&adapter->hw))
5582 e_info("PHY reset is blocked due to SOL/IDER session.\n");
5584 netdev->features = NETIF_F_SG |
5586 NETIF_F_HW_VLAN_TX |
5589 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
5590 netdev->features |= NETIF_F_HW_VLAN_FILTER;
5592 netdev->features |= NETIF_F_TSO;
5593 netdev->features |= NETIF_F_TSO6;
5595 netdev->vlan_features |= NETIF_F_TSO;
5596 netdev->vlan_features |= NETIF_F_TSO6;
5597 netdev->vlan_features |= NETIF_F_HW_CSUM;
5598 netdev->vlan_features |= NETIF_F_SG;
5601 netdev->features |= NETIF_F_HIGHDMA;
5603 if (e1000e_enable_mng_pass_thru(&adapter->hw))
5604 adapter->flags |= FLAG_MNG_PT_ENABLED;
5607 * before reading the NVM, reset the controller to
5608 * put the device in a known good starting state
5610 adapter->hw.mac.ops.reset_hw(&adapter->hw);
5613 * systems with ASPM and others may see the checksum fail on the first
5614 * attempt. Let's give it a few tries
5617 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
5620 e_err("The NVM Checksum Is Not Valid\n");
5626 e1000_eeprom_checks(adapter);
5628 /* copy the MAC address */
5629 if (e1000e_read_mac_addr(&adapter->hw))
5630 e_err("NVM Read Error while reading MAC address\n");
5632 memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
5633 memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
5635 if (!is_valid_ether_addr(netdev->perm_addr)) {
5636 e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
5641 init_timer(&adapter->watchdog_timer);
5642 adapter->watchdog_timer.function = &e1000_watchdog;
5643 adapter->watchdog_timer.data = (unsigned long) adapter;
5645 init_timer(&adapter->phy_info_timer);
5646 adapter->phy_info_timer.function = &e1000_update_phy_info;
5647 adapter->phy_info_timer.data = (unsigned long) adapter;
5649 INIT_WORK(&adapter->reset_task, e1000_reset_task);
5650 INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
5651 INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
5652 INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
5653 INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
5655 /* Initialize link parameters. User can change them with ethtool */
5656 adapter->hw.mac.autoneg = 1;
5657 adapter->fc_autoneg = 1;
5658 adapter->hw.fc.requested_mode = e1000_fc_default;
5659 adapter->hw.fc.current_mode = e1000_fc_default;
5660 adapter->hw.phy.autoneg_advertised = 0x2f;
5662 /* ring size defaults */
5663 adapter->rx_ring->count = 256;
5664 adapter->tx_ring->count = 256;
5667 * Initial Wake on LAN setting - If APM wake is enabled in
5668 * the EEPROM, enable the ACPI Magic Packet filter
5670 if (adapter->flags & FLAG_APME_IN_WUC) {
5671 /* APME bit in EEPROM is mapped to WUC.APME */
5672 eeprom_data = er32(WUC);
5673 eeprom_apme_mask = E1000_WUC_APME;
5674 if (eeprom_data & E1000_WUC_PHY_WAKE)
5675 adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
5676 } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
5677 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
5678 (adapter->hw.bus.func == 1))
5679 e1000_read_nvm(&adapter->hw,
5680 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
5682 e1000_read_nvm(&adapter->hw,
5683 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
5686 /* fetch WoL from EEPROM */
5687 if (eeprom_data & eeprom_apme_mask)
5688 adapter->eeprom_wol |= E1000_WUFC_MAG;
5691 * now that we have the eeprom settings, apply the special cases
5692 * where the eeprom may be wrong or the board simply won't support
5693 * wake on lan on a particular port
5695 if (!(adapter->flags & FLAG_HAS_WOL))
5696 adapter->eeprom_wol = 0;
5698 /* initialize the wol settings based on the eeprom settings */
5699 adapter->wol = adapter->eeprom_wol;
5700 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
5702 /* save off EEPROM version number */
5703 e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
5705 /* reset the hardware with the new settings */
5706 e1000e_reset(adapter);
5709 * If the controller has AMT, do not set DRV_LOAD until the interface
5710 * is up. For all other cases, let the f/w know that the h/w is now
5711 * under the control of the driver.
5713 if (!(adapter->flags & FLAG_HAS_AMT))
5714 e1000_get_hw_control(adapter);
5716 strcpy(netdev->name, "eth%d");
5717 err = register_netdev(netdev);
5721 /* carrier off reporting is important to ethtool even BEFORE open */
5722 netif_carrier_off(netdev);
5724 e1000_print_device_info(adapter);
5726 if (pci_dev_run_wake(pdev)) {
5727 pm_runtime_set_active(&pdev->dev);
5728 pm_runtime_enable(&pdev->dev);
5730 pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC);
5735 if (!(adapter->flags & FLAG_HAS_AMT))
5736 e1000_release_hw_control(adapter);
5738 if (!e1000_check_reset_block(&adapter->hw))
5739 e1000_phy_hw_reset(&adapter->hw);
5742 kfree(adapter->tx_ring);
5743 kfree(adapter->rx_ring);
5745 if (adapter->hw.flash_address)
5746 iounmap(adapter->hw.flash_address);
5747 e1000e_reset_interrupt_capability(adapter);
5749 iounmap(adapter->hw.hw_addr);
5751 free_netdev(netdev);
5753 pci_release_selected_regions(pdev,
5754 pci_select_bars(pdev, IORESOURCE_MEM));
5757 pci_disable_device(pdev);
5762 * e1000_remove - Device Removal Routine
5763 * @pdev: PCI device information struct
5765 * e1000_remove is called by the PCI subsystem to alert the driver
5766 * that it should release a PCI device. The could be caused by a
5767 * Hot-Plug event, or because the driver is going to be removed from
5770 static void __devexit e1000_remove(struct pci_dev *pdev)
5772 struct net_device *netdev = pci_get_drvdata(pdev);
5773 struct e1000_adapter *adapter = netdev_priv(netdev);
5774 bool down = test_bit(__E1000_DOWN, &adapter->state);
5776 pm_runtime_get_sync(&pdev->dev);
5779 * flush_scheduled work may reschedule our watchdog task, so
5780 * explicitly disable watchdog tasks from being rescheduled
5783 set_bit(__E1000_DOWN, &adapter->state);
5784 del_timer_sync(&adapter->watchdog_timer);
5785 del_timer_sync(&adapter->phy_info_timer);
5787 cancel_work_sync(&adapter->reset_task);
5788 cancel_work_sync(&adapter->watchdog_task);
5789 cancel_work_sync(&adapter->downshift_task);
5790 cancel_work_sync(&adapter->update_phy_task);
5791 cancel_work_sync(&adapter->print_hang_task);
5792 flush_scheduled_work();
5794 if (!(netdev->flags & IFF_UP))
5795 e1000_power_down_phy(adapter);
5797 /* Don't lie to e1000_close() down the road. */
5799 clear_bit(__E1000_DOWN, &adapter->state);
5800 unregister_netdev(netdev);
5802 if (pci_dev_run_wake(pdev)) {
5803 pm_runtime_disable(&pdev->dev);
5804 pm_runtime_set_suspended(&pdev->dev);
5806 pm_runtime_put_noidle(&pdev->dev);
5809 * Release control of h/w to f/w. If f/w is AMT enabled, this
5810 * would have already happened in close and is redundant.
5812 e1000_release_hw_control(adapter);
5814 e1000e_reset_interrupt_capability(adapter);
5815 kfree(adapter->tx_ring);
5816 kfree(adapter->rx_ring);
5818 iounmap(adapter->hw.hw_addr);
5819 if (adapter->hw.flash_address)
5820 iounmap(adapter->hw.flash_address);
5821 pci_release_selected_regions(pdev,
5822 pci_select_bars(pdev, IORESOURCE_MEM));
5824 free_netdev(netdev);
5827 pci_disable_pcie_error_reporting(pdev);
5829 pci_disable_device(pdev);
5832 /* PCI Error Recovery (ERS) */
5833 static struct pci_error_handlers e1000_err_handler = {
5834 .error_detected = e1000_io_error_detected,
5835 .slot_reset = e1000_io_slot_reset,
5836 .resume = e1000_io_resume,
5839 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
5840 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
5841 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
5842 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
5843 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
5844 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
5845 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
5846 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
5847 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
5848 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
5850 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
5851 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
5852 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
5853 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
5855 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
5856 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
5857 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
5859 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
5860 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
5861 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
5863 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
5864 board_80003es2lan },
5865 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
5866 board_80003es2lan },
5867 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
5868 board_80003es2lan },
5869 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
5870 board_80003es2lan },
5872 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
5873 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
5874 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
5875 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
5876 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
5877 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
5878 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
5879 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
5881 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
5882 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
5883 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
5884 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
5885 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
5886 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
5887 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
5888 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
5889 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
5891 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
5892 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
5893 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
5895 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
5896 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
5898 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
5899 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
5900 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
5901 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
5903 { } /* terminate list */
5905 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
5907 #ifdef CONFIG_PM_OPS
5908 static const struct dev_pm_ops e1000_pm_ops = {
5909 SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
5910 SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
5911 e1000_runtime_resume, e1000_idle)
5915 /* PCI Device API Driver */
5916 static struct pci_driver e1000_driver = {
5917 .name = e1000e_driver_name,
5918 .id_table = e1000_pci_tbl,
5919 .probe = e1000_probe,
5920 .remove = __devexit_p(e1000_remove),
5921 #ifdef CONFIG_PM_OPS
5922 .driver.pm = &e1000_pm_ops,
5924 .shutdown = e1000_shutdown,
5925 .err_handler = &e1000_err_handler
5929 * e1000_init_module - Driver Registration Routine
5931 * e1000_init_module is the first routine called when the driver is
5932 * loaded. All it does is register with the PCI subsystem.
5934 static int __init e1000_init_module(void)
5937 pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
5938 e1000e_driver_version);
5939 pr_info("Copyright (c) 1999 - 2009 Intel Corporation.\n");
5940 ret = pci_register_driver(&e1000_driver);
5944 module_init(e1000_init_module);
5947 * e1000_exit_module - Driver Exit Cleanup Routine
5949 * e1000_exit_module is called just before the driver is removed
5952 static void __exit e1000_exit_module(void)
5954 pci_unregister_driver(&e1000_driver);
5956 module_exit(e1000_exit_module);
5959 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
5960 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
5961 MODULE_LICENSE("GPL");
5962 MODULE_VERSION(DRV_VERSION);