61696637a21edcc0b646e1c8894c3b89f632dadd
[safe/jmp/linux-2.6] / drivers / net / e100.c
1 /*******************************************************************************
2
3   Intel PRO/100 Linux driver
4   Copyright(c) 1999 - 2006 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 /*
30  *      e100.c: Intel(R) PRO/100 ethernet driver
31  *
32  *      (Re)written 2003 by scott.feldman@intel.com.  Based loosely on
33  *      original e100 driver, but better described as a munging of
34  *      e100, e1000, eepro100, tg3, 8139cp, and other drivers.
35  *
36  *      References:
37  *              Intel 8255x 10/100 Mbps Ethernet Controller Family,
38  *              Open Source Software Developers Manual,
39  *              http://sourceforge.net/projects/e1000
40  *
41  *
42  *                            Theory of Operation
43  *
44  *      I.   General
45  *
46  *      The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
47  *      controller family, which includes the 82557, 82558, 82559, 82550,
48  *      82551, and 82562 devices.  82558 and greater controllers
49  *      integrate the Intel 82555 PHY.  The controllers are used in
50  *      server and client network interface cards, as well as in
51  *      LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
52  *      configurations.  8255x supports a 32-bit linear addressing
53  *      mode and operates at 33Mhz PCI clock rate.
54  *
55  *      II.  Driver Operation
56  *
57  *      Memory-mapped mode is used exclusively to access the device's
58  *      shared-memory structure, the Control/Status Registers (CSR). All
59  *      setup, configuration, and control of the device, including queuing
60  *      of Tx, Rx, and configuration commands is through the CSR.
61  *      cmd_lock serializes accesses to the CSR command register.  cb_lock
62  *      protects the shared Command Block List (CBL).
63  *
64  *      8255x is highly MII-compliant and all access to the PHY go
65  *      through the Management Data Interface (MDI).  Consequently, the
66  *      driver leverages the mii.c library shared with other MII-compliant
67  *      devices.
68  *
69  *      Big- and Little-Endian byte order as well as 32- and 64-bit
70  *      archs are supported.  Weak-ordered memory and non-cache-coherent
71  *      archs are supported.
72  *
73  *      III. Transmit
74  *
75  *      A Tx skb is mapped and hangs off of a TCB.  TCBs are linked
76  *      together in a fixed-size ring (CBL) thus forming the flexible mode
77  *      memory structure.  A TCB marked with the suspend-bit indicates
78  *      the end of the ring.  The last TCB processed suspends the
79  *      controller, and the controller can be restarted by issue a CU
80  *      resume command to continue from the suspend point, or a CU start
81  *      command to start at a given position in the ring.
82  *
83  *      Non-Tx commands (config, multicast setup, etc) are linked
84  *      into the CBL ring along with Tx commands.  The common structure
85  *      used for both Tx and non-Tx commands is the Command Block (CB).
86  *
87  *      cb_to_use is the next CB to use for queuing a command; cb_to_clean
88  *      is the next CB to check for completion; cb_to_send is the first
89  *      CB to start on in case of a previous failure to resume.  CB clean
90  *      up happens in interrupt context in response to a CU interrupt.
91  *      cbs_avail keeps track of number of free CB resources available.
92  *
93  *      Hardware padding of short packets to minimum packet size is
94  *      enabled.  82557 pads with 7Eh, while the later controllers pad
95  *      with 00h.
96  *
97  *      IV.  Recieve
98  *
99  *      The Receive Frame Area (RFA) comprises a ring of Receive Frame
100  *      Descriptors (RFD) + data buffer, thus forming the simplified mode
101  *      memory structure.  Rx skbs are allocated to contain both the RFD
102  *      and the data buffer, but the RFD is pulled off before the skb is
103  *      indicated.  The data buffer is aligned such that encapsulated
104  *      protocol headers are u32-aligned.  Since the RFD is part of the
105  *      mapped shared memory, and completion status is contained within
106  *      the RFD, the RFD must be dma_sync'ed to maintain a consistent
107  *      view from software and hardware.
108  *
109  *      Under typical operation, the  receive unit (RU) is start once,
110  *      and the controller happily fills RFDs as frames arrive.  If
111  *      replacement RFDs cannot be allocated, or the RU goes non-active,
112  *      the RU must be restarted.  Frame arrival generates an interrupt,
113  *      and Rx indication and re-allocation happen in the same context,
114  *      therefore no locking is required.  A software-generated interrupt
115  *      is generated from the watchdog to recover from a failed allocation
116  *      senario where all Rx resources have been indicated and none re-
117  *      placed.
118  *
119  *      V.   Miscellaneous
120  *
121  *      VLAN offloading of tagging, stripping and filtering is not
122  *      supported, but driver will accommodate the extra 4-byte VLAN tag
123  *      for processing by upper layers.  Tx/Rx Checksum offloading is not
124  *      supported.  Tx Scatter/Gather is not supported.  Jumbo Frames is
125  *      not supported (hardware limitation).
126  *
127  *      MagicPacket(tm) WoL support is enabled/disabled via ethtool.
128  *
129  *      Thanks to JC (jchapman@katalix.com) for helping with
130  *      testing/troubleshooting the development driver.
131  *
132  *      TODO:
133  *      o several entry points race with dev->close
134  *      o check for tx-no-resources/stop Q races with tx clean/wake Q
135  *
136  *      FIXES:
137  * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
138  *      - Stratus87247: protect MDI control register manipulations
139  */
140
141 #include <linux/module.h>
142 #include <linux/moduleparam.h>
143 #include <linux/kernel.h>
144 #include <linux/types.h>
145 #include <linux/slab.h>
146 #include <linux/delay.h>
147 #include <linux/init.h>
148 #include <linux/pci.h>
149 #include <linux/dma-mapping.h>
150 #include <linux/netdevice.h>
151 #include <linux/etherdevice.h>
152 #include <linux/mii.h>
153 #include <linux/if_vlan.h>
154 #include <linux/skbuff.h>
155 #include <linux/ethtool.h>
156 #include <linux/string.h>
157 #include <asm/unaligned.h>
158
159
160 #define DRV_NAME                "e100"
161 #define DRV_EXT                 "-NAPI"
162 #define DRV_VERSION             "3.5.17-k4"DRV_EXT
163 #define DRV_DESCRIPTION         "Intel(R) PRO/100 Network Driver"
164 #define DRV_COPYRIGHT           "Copyright(c) 1999-2006 Intel Corporation"
165 #define PFX                     DRV_NAME ": "
166
167 #define E100_WATCHDOG_PERIOD    (2 * HZ)
168 #define E100_NAPI_WEIGHT        16
169
170 MODULE_DESCRIPTION(DRV_DESCRIPTION);
171 MODULE_AUTHOR(DRV_COPYRIGHT);
172 MODULE_LICENSE("GPL");
173 MODULE_VERSION(DRV_VERSION);
174
175 static int debug = 3;
176 static int eeprom_bad_csum_allow = 0;
177 static int use_io = 0;
178 module_param(debug, int, 0);
179 module_param(eeprom_bad_csum_allow, int, 0);
180 module_param(use_io, int, 0);
181 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
182 MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
183 MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
184 #define DPRINTK(nlevel, klevel, fmt, args...) \
185         (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
186         printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
187                 __FUNCTION__ , ## args))
188
189 #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
190         PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
191         PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
192 static struct pci_device_id e100_id_table[] = {
193         INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
194         INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
195         INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
196         INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
197         INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
198         INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
199         INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
200         INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
201         INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
202         INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
203         INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
204         INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
205         INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
206         INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
207         INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
208         INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
209         INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
210         INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
211         INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
212         INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
213         INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
214         INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
215         INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
216         INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
217         INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
218         INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
219         INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
220         INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
221         INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
222         INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
223         INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
224         INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
225         INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
226         INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
227         INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
228         INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
229         INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
230         INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
231         INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
232         INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
233         INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
234         { 0, }
235 };
236 MODULE_DEVICE_TABLE(pci, e100_id_table);
237
238 enum mac {
239         mac_82557_D100_A  = 0,
240         mac_82557_D100_B  = 1,
241         mac_82557_D100_C  = 2,
242         mac_82558_D101_A4 = 4,
243         mac_82558_D101_B0 = 5,
244         mac_82559_D101M   = 8,
245         mac_82559_D101S   = 9,
246         mac_82550_D102    = 12,
247         mac_82550_D102_C  = 13,
248         mac_82551_E       = 14,
249         mac_82551_F       = 15,
250         mac_82551_10      = 16,
251         mac_unknown       = 0xFF,
252 };
253
254 enum phy {
255         phy_100a     = 0x000003E0,
256         phy_100c     = 0x035002A8,
257         phy_82555_tx = 0x015002A8,
258         phy_nsc_tx   = 0x5C002000,
259         phy_82562_et = 0x033002A8,
260         phy_82562_em = 0x032002A8,
261         phy_82562_ek = 0x031002A8,
262         phy_82562_eh = 0x017002A8,
263         phy_unknown  = 0xFFFFFFFF,
264 };
265
266 /* CSR (Control/Status Registers) */
267 struct csr {
268         struct {
269                 u8 status;
270                 u8 stat_ack;
271                 u8 cmd_lo;
272                 u8 cmd_hi;
273                 u32 gen_ptr;
274         } scb;
275         u32 port;
276         u16 flash_ctrl;
277         u8 eeprom_ctrl_lo;
278         u8 eeprom_ctrl_hi;
279         u32 mdi_ctrl;
280         u32 rx_dma_count;
281 };
282
283 enum scb_status {
284         rus_ready        = 0x10,
285         rus_mask         = 0x3C,
286 };
287
288 enum scb_stat_ack {
289         stat_ack_not_ours    = 0x00,
290         stat_ack_sw_gen      = 0x04,
291         stat_ack_rnr         = 0x10,
292         stat_ack_cu_idle     = 0x20,
293         stat_ack_frame_rx    = 0x40,
294         stat_ack_cu_cmd_done = 0x80,
295         stat_ack_not_present = 0xFF,
296         stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
297         stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
298 };
299
300 enum scb_cmd_hi {
301         irq_mask_none = 0x00,
302         irq_mask_all  = 0x01,
303         irq_sw_gen    = 0x02,
304 };
305
306 enum scb_cmd_lo {
307         cuc_nop        = 0x00,
308         ruc_start      = 0x01,
309         ruc_load_base  = 0x06,
310         cuc_start      = 0x10,
311         cuc_resume     = 0x20,
312         cuc_dump_addr  = 0x40,
313         cuc_dump_stats = 0x50,
314         cuc_load_base  = 0x60,
315         cuc_dump_reset = 0x70,
316 };
317
318 enum cuc_dump {
319         cuc_dump_complete       = 0x0000A005,
320         cuc_dump_reset_complete = 0x0000A007,
321 };
322
323 enum port {
324         software_reset  = 0x0000,
325         selftest        = 0x0001,
326         selective_reset = 0x0002,
327 };
328
329 enum eeprom_ctrl_lo {
330         eesk = 0x01,
331         eecs = 0x02,
332         eedi = 0x04,
333         eedo = 0x08,
334 };
335
336 enum mdi_ctrl {
337         mdi_write = 0x04000000,
338         mdi_read  = 0x08000000,
339         mdi_ready = 0x10000000,
340 };
341
342 enum eeprom_op {
343         op_write = 0x05,
344         op_read  = 0x06,
345         op_ewds  = 0x10,
346         op_ewen  = 0x13,
347 };
348
349 enum eeprom_offsets {
350         eeprom_cnfg_mdix  = 0x03,
351         eeprom_id         = 0x0A,
352         eeprom_config_asf = 0x0D,
353         eeprom_smbus_addr = 0x90,
354 };
355
356 enum eeprom_cnfg_mdix {
357         eeprom_mdix_enabled = 0x0080,
358 };
359
360 enum eeprom_id {
361         eeprom_id_wol = 0x0020,
362 };
363
364 enum eeprom_config_asf {
365         eeprom_asf = 0x8000,
366         eeprom_gcl = 0x4000,
367 };
368
369 enum cb_status {
370         cb_complete = 0x8000,
371         cb_ok       = 0x2000,
372 };
373
374 enum cb_command {
375         cb_nop    = 0x0000,
376         cb_iaaddr = 0x0001,
377         cb_config = 0x0002,
378         cb_multi  = 0x0003,
379         cb_tx     = 0x0004,
380         cb_ucode  = 0x0005,
381         cb_dump   = 0x0006,
382         cb_tx_sf  = 0x0008,
383         cb_cid    = 0x1f00,
384         cb_i      = 0x2000,
385         cb_s      = 0x4000,
386         cb_el     = 0x8000,
387 };
388
389 struct rfd {
390         u16 status;
391         u16 command;
392         u32 link;
393         u32 rbd;
394         u16 actual_size;
395         u16 size;
396 };
397
398 struct rx {
399         struct rx *next, *prev;
400         struct sk_buff *skb;
401         dma_addr_t dma_addr;
402 };
403
404 #if defined(__BIG_ENDIAN_BITFIELD)
405 #define X(a,b)  b,a
406 #else
407 #define X(a,b)  a,b
408 #endif
409 struct config {
410 /*0*/   u8 X(byte_count:6, pad0:2);
411 /*1*/   u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
412 /*2*/   u8 adaptive_ifs;
413 /*3*/   u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
414            term_write_cache_line:1), pad3:4);
415 /*4*/   u8 X(rx_dma_max_count:7, pad4:1);
416 /*5*/   u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
417 /*6*/   u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
418            tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
419            rx_discard_overruns:1), rx_save_bad_frames:1);
420 /*7*/   u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
421            pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
422            tx_dynamic_tbd:1);
423 /*8*/   u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
424 /*9*/   u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
425            link_status_wake:1), arp_wake:1), mcmatch_wake:1);
426 /*10*/  u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
427            loopback:2);
428 /*11*/  u8 X(linear_priority:3, pad11:5);
429 /*12*/  u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
430 /*13*/  u8 ip_addr_lo;
431 /*14*/  u8 ip_addr_hi;
432 /*15*/  u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
433            wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
434            pad15_2:1), crs_or_cdt:1);
435 /*16*/  u8 fc_delay_lo;
436 /*17*/  u8 fc_delay_hi;
437 /*18*/  u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
438            rx_long_ok:1), fc_priority_threshold:3), pad18:1);
439 /*19*/  u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
440            fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
441            full_duplex_force:1), full_duplex_pin:1);
442 /*20*/  u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
443 /*21*/  u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
444 /*22*/  u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
445         u8 pad_d102[9];
446 };
447
448 #define E100_MAX_MULTICAST_ADDRS        64
449 struct multi {
450         u16 count;
451         u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
452 };
453
454 /* Important: keep total struct u32-aligned */
455 #define UCODE_SIZE                      134
456 struct cb {
457         u16 status;
458         u16 command;
459         u32 link;
460         union {
461                 u8 iaaddr[ETH_ALEN];
462                 u32 ucode[UCODE_SIZE];
463                 struct config config;
464                 struct multi multi;
465                 struct {
466                         u32 tbd_array;
467                         u16 tcb_byte_count;
468                         u8 threshold;
469                         u8 tbd_count;
470                         struct {
471                                 u32 buf_addr;
472                                 u16 size;
473                                 u16 eol;
474                         } tbd;
475                 } tcb;
476                 u32 dump_buffer_addr;
477         } u;
478         struct cb *next, *prev;
479         dma_addr_t dma_addr;
480         struct sk_buff *skb;
481 };
482
483 enum loopback {
484         lb_none = 0, lb_mac = 1, lb_phy = 3,
485 };
486
487 struct stats {
488         u32 tx_good_frames, tx_max_collisions, tx_late_collisions,
489                 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
490                 tx_multiple_collisions, tx_total_collisions;
491         u32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
492                 rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
493                 rx_short_frame_errors;
494         u32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
495         u16 xmt_tco_frames, rcv_tco_frames;
496         u32 complete;
497 };
498
499 struct mem {
500         struct {
501                 u32 signature;
502                 u32 result;
503         } selftest;
504         struct stats stats;
505         u8 dump_buf[596];
506 };
507
508 struct param_range {
509         u32 min;
510         u32 max;
511         u32 count;
512 };
513
514 struct params {
515         struct param_range rfds;
516         struct param_range cbs;
517 };
518
519 struct nic {
520         /* Begin: frequently used values: keep adjacent for cache effect */
521         u32 msg_enable                          ____cacheline_aligned;
522         struct net_device *netdev;
523         struct pci_dev *pdev;
524
525         struct rx *rxs                          ____cacheline_aligned;
526         struct rx *rx_to_use;
527         struct rx *rx_to_clean;
528         struct rfd blank_rfd;
529
530         spinlock_t cb_lock                      ____cacheline_aligned;
531         spinlock_t cmd_lock;
532         struct csr __iomem *csr;
533         enum scb_cmd_lo cuc_cmd;
534         unsigned int cbs_avail;
535         struct cb *cbs;
536         struct cb *cb_to_use;
537         struct cb *cb_to_send;
538         struct cb *cb_to_clean;
539         u16 tx_command;
540         /* End: frequently used values: keep adjacent for cache effect */
541
542         enum {
543                 ich                = (1 << 0),
544                 promiscuous        = (1 << 1),
545                 multicast_all      = (1 << 2),
546                 wol_magic          = (1 << 3),
547                 ich_10h_workaround = (1 << 4),
548         } flags                                 ____cacheline_aligned;
549
550         enum mac mac;
551         enum phy phy;
552         struct params params;
553         struct net_device_stats net_stats;
554         struct timer_list watchdog;
555         struct timer_list blink_timer;
556         struct mii_if_info mii;
557         struct work_struct tx_timeout_task;
558         enum loopback loopback;
559
560         struct mem *mem;
561         dma_addr_t dma_addr;
562
563         dma_addr_t cbs_dma_addr;
564         u8 adaptive_ifs;
565         u8 tx_threshold;
566         u32 tx_frames;
567         u32 tx_collisions;
568         u32 tx_deferred;
569         u32 tx_single_collisions;
570         u32 tx_multiple_collisions;
571         u32 tx_fc_pause;
572         u32 tx_tco_frames;
573
574         u32 rx_fc_pause;
575         u32 rx_fc_unsupported;
576         u32 rx_tco_frames;
577         u32 rx_over_length_errors;
578
579         u8 rev_id;
580         u16 leds;
581         u16 eeprom_wc;
582         u16 eeprom[256];
583         spinlock_t mdio_lock;
584 };
585
586 static inline void e100_write_flush(struct nic *nic)
587 {
588         /* Flush previous PCI writes through intermediate bridges
589          * by doing a benign read */
590         (void)ioread8(&nic->csr->scb.status);
591 }
592
593 static void e100_enable_irq(struct nic *nic)
594 {
595         unsigned long flags;
596
597         spin_lock_irqsave(&nic->cmd_lock, flags);
598         iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
599         e100_write_flush(nic);
600         spin_unlock_irqrestore(&nic->cmd_lock, flags);
601 }
602
603 static void e100_disable_irq(struct nic *nic)
604 {
605         unsigned long flags;
606
607         spin_lock_irqsave(&nic->cmd_lock, flags);
608         iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
609         e100_write_flush(nic);
610         spin_unlock_irqrestore(&nic->cmd_lock, flags);
611 }
612
613 static void e100_hw_reset(struct nic *nic)
614 {
615         /* Put CU and RU into idle with a selective reset to get
616          * device off of PCI bus */
617         iowrite32(selective_reset, &nic->csr->port);
618         e100_write_flush(nic); udelay(20);
619
620         /* Now fully reset device */
621         iowrite32(software_reset, &nic->csr->port);
622         e100_write_flush(nic); udelay(20);
623
624         /* Mask off our interrupt line - it's unmasked after reset */
625         e100_disable_irq(nic);
626 }
627
628 static int e100_self_test(struct nic *nic)
629 {
630         u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
631
632         /* Passing the self-test is a pretty good indication
633          * that the device can DMA to/from host memory */
634
635         nic->mem->selftest.signature = 0;
636         nic->mem->selftest.result = 0xFFFFFFFF;
637
638         iowrite32(selftest | dma_addr, &nic->csr->port);
639         e100_write_flush(nic);
640         /* Wait 10 msec for self-test to complete */
641         msleep(10);
642
643         /* Interrupts are enabled after self-test */
644         e100_disable_irq(nic);
645
646         /* Check results of self-test */
647         if(nic->mem->selftest.result != 0) {
648                 DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
649                         nic->mem->selftest.result);
650                 return -ETIMEDOUT;
651         }
652         if(nic->mem->selftest.signature == 0) {
653                 DPRINTK(HW, ERR, "Self-test failed: timed out\n");
654                 return -ETIMEDOUT;
655         }
656
657         return 0;
658 }
659
660 static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data)
661 {
662         u32 cmd_addr_data[3];
663         u8 ctrl;
664         int i, j;
665
666         /* Three cmds: write/erase enable, write data, write/erase disable */
667         cmd_addr_data[0] = op_ewen << (addr_len - 2);
668         cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
669                 cpu_to_le16(data);
670         cmd_addr_data[2] = op_ewds << (addr_len - 2);
671
672         /* Bit-bang cmds to write word to eeprom */
673         for(j = 0; j < 3; j++) {
674
675                 /* Chip select */
676                 iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
677                 e100_write_flush(nic); udelay(4);
678
679                 for(i = 31; i >= 0; i--) {
680                         ctrl = (cmd_addr_data[j] & (1 << i)) ?
681                                 eecs | eedi : eecs;
682                         iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
683                         e100_write_flush(nic); udelay(4);
684
685                         iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
686                         e100_write_flush(nic); udelay(4);
687                 }
688                 /* Wait 10 msec for cmd to complete */
689                 msleep(10);
690
691                 /* Chip deselect */
692                 iowrite8(0, &nic->csr->eeprom_ctrl_lo);
693                 e100_write_flush(nic); udelay(4);
694         }
695 };
696
697 /* General technique stolen from the eepro100 driver - very clever */
698 static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
699 {
700         u32 cmd_addr_data;
701         u16 data = 0;
702         u8 ctrl;
703         int i;
704
705         cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
706
707         /* Chip select */
708         iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
709         e100_write_flush(nic); udelay(4);
710
711         /* Bit-bang to read word from eeprom */
712         for(i = 31; i >= 0; i--) {
713                 ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
714                 iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
715                 e100_write_flush(nic); udelay(4);
716
717                 iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
718                 e100_write_flush(nic); udelay(4);
719
720                 /* Eeprom drives a dummy zero to EEDO after receiving
721                  * complete address.  Use this to adjust addr_len. */
722                 ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
723                 if(!(ctrl & eedo) && i > 16) {
724                         *addr_len -= (i - 16);
725                         i = 17;
726                 }
727
728                 data = (data << 1) | (ctrl & eedo ? 1 : 0);
729         }
730
731         /* Chip deselect */
732         iowrite8(0, &nic->csr->eeprom_ctrl_lo);
733         e100_write_flush(nic); udelay(4);
734
735         return le16_to_cpu(data);
736 };
737
738 /* Load entire EEPROM image into driver cache and validate checksum */
739 static int e100_eeprom_load(struct nic *nic)
740 {
741         u16 addr, addr_len = 8, checksum = 0;
742
743         /* Try reading with an 8-bit addr len to discover actual addr len */
744         e100_eeprom_read(nic, &addr_len, 0);
745         nic->eeprom_wc = 1 << addr_len;
746
747         for(addr = 0; addr < nic->eeprom_wc; addr++) {
748                 nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
749                 if(addr < nic->eeprom_wc - 1)
750                         checksum += cpu_to_le16(nic->eeprom[addr]);
751         }
752
753         /* The checksum, stored in the last word, is calculated such that
754          * the sum of words should be 0xBABA */
755         checksum = le16_to_cpu(0xBABA - checksum);
756         if(checksum != nic->eeprom[nic->eeprom_wc - 1]) {
757                 DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
758                 if (!eeprom_bad_csum_allow)
759                         return -EAGAIN;
760         }
761
762         return 0;
763 }
764
765 /* Save (portion of) driver EEPROM cache to device and update checksum */
766 static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
767 {
768         u16 addr, addr_len = 8, checksum = 0;
769
770         /* Try reading with an 8-bit addr len to discover actual addr len */
771         e100_eeprom_read(nic, &addr_len, 0);
772         nic->eeprom_wc = 1 << addr_len;
773
774         if(start + count >= nic->eeprom_wc)
775                 return -EINVAL;
776
777         for(addr = start; addr < start + count; addr++)
778                 e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
779
780         /* The checksum, stored in the last word, is calculated such that
781          * the sum of words should be 0xBABA */
782         for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
783                 checksum += cpu_to_le16(nic->eeprom[addr]);
784         nic->eeprom[nic->eeprom_wc - 1] = le16_to_cpu(0xBABA - checksum);
785         e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
786                 nic->eeprom[nic->eeprom_wc - 1]);
787
788         return 0;
789 }
790
791 #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
792 #define E100_WAIT_SCB_FAST 20       /* delay like the old code */
793 static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
794 {
795         unsigned long flags;
796         unsigned int i;
797         int err = 0;
798
799         spin_lock_irqsave(&nic->cmd_lock, flags);
800
801         /* Previous command is accepted when SCB clears */
802         for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
803                 if(likely(!ioread8(&nic->csr->scb.cmd_lo)))
804                         break;
805                 cpu_relax();
806                 if(unlikely(i > E100_WAIT_SCB_FAST))
807                         udelay(5);
808         }
809         if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
810                 err = -EAGAIN;
811                 goto err_unlock;
812         }
813
814         if(unlikely(cmd != cuc_resume))
815                 iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
816         iowrite8(cmd, &nic->csr->scb.cmd_lo);
817
818 err_unlock:
819         spin_unlock_irqrestore(&nic->cmd_lock, flags);
820
821         return err;
822 }
823
824 static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
825         void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
826 {
827         struct cb *cb;
828         unsigned long flags;
829         int err = 0;
830
831         spin_lock_irqsave(&nic->cb_lock, flags);
832
833         if(unlikely(!nic->cbs_avail)) {
834                 err = -ENOMEM;
835                 goto err_unlock;
836         }
837
838         cb = nic->cb_to_use;
839         nic->cb_to_use = cb->next;
840         nic->cbs_avail--;
841         cb->skb = skb;
842
843         if(unlikely(!nic->cbs_avail))
844                 err = -ENOSPC;
845
846         cb_prepare(nic, cb, skb);
847
848         /* Order is important otherwise we'll be in a race with h/w:
849          * set S-bit in current first, then clear S-bit in previous. */
850         cb->command |= cpu_to_le16(cb_s);
851         wmb();
852         cb->prev->command &= cpu_to_le16(~cb_s);
853
854         while(nic->cb_to_send != nic->cb_to_use) {
855                 if(unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
856                         nic->cb_to_send->dma_addr))) {
857                         /* Ok, here's where things get sticky.  It's
858                          * possible that we can't schedule the command
859                          * because the controller is too busy, so
860                          * let's just queue the command and try again
861                          * when another command is scheduled. */
862                         if(err == -ENOSPC) {
863                                 //request a reset
864                                 schedule_work(&nic->tx_timeout_task);
865                         }
866                         break;
867                 } else {
868                         nic->cuc_cmd = cuc_resume;
869                         nic->cb_to_send = nic->cb_to_send->next;
870                 }
871         }
872
873 err_unlock:
874         spin_unlock_irqrestore(&nic->cb_lock, flags);
875
876         return err;
877 }
878
879 static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
880 {
881         u32 data_out = 0;
882         unsigned int i;
883         unsigned long flags;
884
885
886         /*
887          * Stratus87247: we shouldn't be writing the MDI control
888          * register until the Ready bit shows True.  Also, since
889          * manipulation of the MDI control registers is a multi-step
890          * procedure it should be done under lock.
891          */
892         spin_lock_irqsave(&nic->mdio_lock, flags);
893         for (i = 100; i; --i) {
894                 if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
895                         break;
896                 udelay(20);
897         }
898         if (unlikely(!i)) {
899                 printk("e100.mdio_ctrl(%s) won't go Ready\n",
900                         nic->netdev->name );
901                 spin_unlock_irqrestore(&nic->mdio_lock, flags);
902                 return 0;               /* No way to indicate timeout error */
903         }
904         iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
905
906         for (i = 0; i < 100; i++) {
907                 udelay(20);
908                 if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
909                         break;
910         }
911         spin_unlock_irqrestore(&nic->mdio_lock, flags);
912         DPRINTK(HW, DEBUG,
913                 "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
914                 dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
915         return (u16)data_out;
916 }
917
918 static int mdio_read(struct net_device *netdev, int addr, int reg)
919 {
920         return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
921 }
922
923 static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
924 {
925         mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
926 }
927
928 static void e100_get_defaults(struct nic *nic)
929 {
930         struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
931         struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
932
933         pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
934         /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
935         nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
936         if(nic->mac == mac_unknown)
937                 nic->mac = mac_82557_D100_A;
938
939         nic->params.rfds = rfds;
940         nic->params.cbs = cbs;
941
942         /* Quadwords to DMA into FIFO before starting frame transmit */
943         nic->tx_threshold = 0xE0;
944
945         /* no interrupt for every tx completion, delay = 256us if not 557*/
946         nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
947                 ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
948
949         /* Template for a freshly allocated RFD */
950         nic->blank_rfd.command = cpu_to_le16(cb_el & cb_s);
951         nic->blank_rfd.rbd = 0xFFFFFFFF;
952         nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
953
954         /* MII setup */
955         nic->mii.phy_id_mask = 0x1F;
956         nic->mii.reg_num_mask = 0x1F;
957         nic->mii.dev = nic->netdev;
958         nic->mii.mdio_read = mdio_read;
959         nic->mii.mdio_write = mdio_write;
960 }
961
962 static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
963 {
964         struct config *config = &cb->u.config;
965         u8 *c = (u8 *)config;
966
967         cb->command = cpu_to_le16(cb_config);
968
969         memset(config, 0, sizeof(struct config));
970
971         config->byte_count = 0x16;              /* bytes in this struct */
972         config->rx_fifo_limit = 0x8;            /* bytes in FIFO before DMA */
973         config->direct_rx_dma = 0x1;            /* reserved */
974         config->standard_tcb = 0x1;             /* 1=standard, 0=extended */
975         config->standard_stat_counter = 0x1;    /* 1=standard, 0=extended */
976         config->rx_discard_short_frames = 0x1;  /* 1=discard, 0=pass */
977         config->tx_underrun_retry = 0x3;        /* # of underrun retries */
978         config->mii_mode = 0x1;                 /* 1=MII mode, 0=503 mode */
979         config->pad10 = 0x6;
980         config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
981         config->preamble_length = 0x2;          /* 0=1, 1=3, 2=7, 3=15 bytes */
982         config->ifs = 0x6;                      /* x16 = inter frame spacing */
983         config->ip_addr_hi = 0xF2;              /* ARP IP filter - not used */
984         config->pad15_1 = 0x1;
985         config->pad15_2 = 0x1;
986         config->crs_or_cdt = 0x0;               /* 0=CRS only, 1=CRS or CDT */
987         config->fc_delay_hi = 0x40;             /* time delay for fc frame */
988         config->tx_padding = 0x1;               /* 1=pad short frames */
989         config->fc_priority_threshold = 0x7;    /* 7=priority fc disabled */
990         config->pad18 = 0x1;
991         config->full_duplex_pin = 0x1;          /* 1=examine FDX# pin */
992         config->pad20_1 = 0x1F;
993         config->fc_priority_location = 0x1;     /* 1=byte#31, 0=byte#19 */
994         config->pad21_1 = 0x5;
995
996         config->adaptive_ifs = nic->adaptive_ifs;
997         config->loopback = nic->loopback;
998
999         if(nic->mii.force_media && nic->mii.full_duplex)
1000                 config->full_duplex_force = 0x1;        /* 1=force, 0=auto */
1001
1002         if(nic->flags & promiscuous || nic->loopback) {
1003                 config->rx_save_bad_frames = 0x1;       /* 1=save, 0=discard */
1004                 config->rx_discard_short_frames = 0x0;  /* 1=discard, 0=save */
1005                 config->promiscuous_mode = 0x1;         /* 1=on, 0=off */
1006         }
1007
1008         if(nic->flags & multicast_all)
1009                 config->multicast_all = 0x1;            /* 1=accept, 0=no */
1010
1011         /* disable WoL when up */
1012         if(netif_running(nic->netdev) || !(nic->flags & wol_magic))
1013                 config->magic_packet_disable = 0x1;     /* 1=off, 0=on */
1014
1015         if(nic->mac >= mac_82558_D101_A4) {
1016                 config->fc_disable = 0x1;       /* 1=Tx fc off, 0=Tx fc on */
1017                 config->mwi_enable = 0x1;       /* 1=enable, 0=disable */
1018                 config->standard_tcb = 0x0;     /* 1=standard, 0=extended */
1019                 config->rx_long_ok = 0x1;       /* 1=VLANs ok, 0=standard */
1020                 if(nic->mac >= mac_82559_D101M)
1021                         config->tno_intr = 0x1;         /* TCO stats enable */
1022                 else
1023                         config->standard_stat_counter = 0x0;
1024         }
1025
1026         DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1027                 c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
1028         DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1029                 c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
1030         DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1031                 c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
1032 }
1033
1034 /********************************************************/
1035 /*  Micro code for 8086:1229 Rev 8                      */
1036 /********************************************************/
1037
1038 /*  Parameter values for the D101M B-step  */
1039 #define D101M_CPUSAVER_TIMER_DWORD              78
1040 #define D101M_CPUSAVER_BUNDLE_DWORD             65
1041 #define D101M_CPUSAVER_MIN_SIZE_DWORD           126
1042
1043 #define D101M_B_RCVBUNDLE_UCODE \
1044 {\
1045 0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
1046 0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
1047 0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
1048 0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
1049 0x00380438, 0x00000000, 0x00140000, 0x00380555, \
1050 0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
1051 0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
1052 0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
1053 0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
1054 0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
1055 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1056 0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
1057 0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
1058 0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
1059 0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
1060 0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
1061 0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
1062 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1063 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1064 0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
1065 0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
1066 0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
1067 0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
1068 0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
1069 0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
1070 0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
1071 0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
1072 0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
1073 0x00380559, 0x00000000, 0x00000000, 0x00000000, \
1074 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1075 0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
1076 0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
1077 0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
1078 }
1079
1080 /********************************************************/
1081 /*  Micro code for 8086:1229 Rev 9                      */
1082 /********************************************************/
1083
1084 /*  Parameter values for the D101S  */
1085 #define D101S_CPUSAVER_TIMER_DWORD              78
1086 #define D101S_CPUSAVER_BUNDLE_DWORD             67
1087 #define D101S_CPUSAVER_MIN_SIZE_DWORD           128
1088
1089 #define D101S_RCVBUNDLE_UCODE \
1090 {\
1091 0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
1092 0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
1093 0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
1094 0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
1095 0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
1096 0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
1097 0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
1098 0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
1099 0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
1100 0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
1101 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1102 0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
1103 0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
1104 0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
1105 0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
1106 0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
1107 0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
1108 0x00101313, 0x00380700, 0x00000000, 0x00000000, \
1109 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1110 0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
1111 0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
1112 0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
1113 0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
1114 0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
1115 0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
1116 0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
1117 0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
1118 0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
1119 0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
1120 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1121 0x00000000, 0x00000000, 0x00000000, 0x00130831, \
1122 0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
1123 0x00041000, 0x00010004, 0x00380700  \
1124 }
1125
1126 /********************************************************/
1127 /*  Micro code for the 8086:1229 Rev F/10               */
1128 /********************************************************/
1129
1130 /*  Parameter values for the D102 E-step  */
1131 #define D102_E_CPUSAVER_TIMER_DWORD             42
1132 #define D102_E_CPUSAVER_BUNDLE_DWORD            54
1133 #define D102_E_CPUSAVER_MIN_SIZE_DWORD          46
1134
1135 #define     D102_E_RCVBUNDLE_UCODE \
1136 {\
1137 0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
1138 0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
1139 0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
1140 0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
1141 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1142 0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
1143 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1144 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1145 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1146 0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
1147 0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
1148 0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
1149 0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
1150 0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
1151 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1152 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1153 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1154 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
1155 0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
1156 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1157 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1158 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1159 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1160 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1161 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1162 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1163 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1164 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1165 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1166 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1167 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1168 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1169 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
1170 }
1171
1172 static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1173 {
1174 /* *INDENT-OFF* */
1175         static struct {
1176                 u32 ucode[UCODE_SIZE + 1];
1177                 u8 mac;
1178                 u8 timer_dword;
1179                 u8 bundle_dword;
1180                 u8 min_size_dword;
1181         } ucode_opts[] = {
1182                 { D101M_B_RCVBUNDLE_UCODE,
1183                   mac_82559_D101M,
1184                   D101M_CPUSAVER_TIMER_DWORD,
1185                   D101M_CPUSAVER_BUNDLE_DWORD,
1186                   D101M_CPUSAVER_MIN_SIZE_DWORD },
1187                 { D101S_RCVBUNDLE_UCODE,
1188                   mac_82559_D101S,
1189                   D101S_CPUSAVER_TIMER_DWORD,
1190                   D101S_CPUSAVER_BUNDLE_DWORD,
1191                   D101S_CPUSAVER_MIN_SIZE_DWORD },
1192                 { D102_E_RCVBUNDLE_UCODE,
1193                   mac_82551_F,
1194                   D102_E_CPUSAVER_TIMER_DWORD,
1195                   D102_E_CPUSAVER_BUNDLE_DWORD,
1196                   D102_E_CPUSAVER_MIN_SIZE_DWORD },
1197                 { D102_E_RCVBUNDLE_UCODE,
1198                   mac_82551_10,
1199                   D102_E_CPUSAVER_TIMER_DWORD,
1200                   D102_E_CPUSAVER_BUNDLE_DWORD,
1201                   D102_E_CPUSAVER_MIN_SIZE_DWORD },
1202                 { {0}, 0, 0, 0, 0}
1203         }, *opts;
1204 /* *INDENT-ON* */
1205
1206 /*************************************************************************
1207 *  CPUSaver parameters
1208 *
1209 *  All CPUSaver parameters are 16-bit literals that are part of a
1210 *  "move immediate value" instruction.  By changing the value of
1211 *  the literal in the instruction before the code is loaded, the
1212 *  driver can change the algorithm.
1213 *
1214 *  INTDELAY - This loads the dead-man timer with its initial value.
1215 *    When this timer expires the interrupt is asserted, and the
1216 *    timer is reset each time a new packet is received.  (see
1217 *    BUNDLEMAX below to set the limit on number of chained packets)
1218 *    The current default is 0x600 or 1536.  Experiments show that
1219 *    the value should probably stay within the 0x200 - 0x1000.
1220 *
1221 *  BUNDLEMAX -
1222 *    This sets the maximum number of frames that will be bundled.  In
1223 *    some situations, such as the TCP windowing algorithm, it may be
1224 *    better to limit the growth of the bundle size than let it go as
1225 *    high as it can, because that could cause too much added latency.
1226 *    The default is six, because this is the number of packets in the
1227 *    default TCP window size.  A value of 1 would make CPUSaver indicate
1228 *    an interrupt for every frame received.  If you do not want to put
1229 *    a limit on the bundle size, set this value to xFFFF.
1230 *
1231 *  BUNDLESMALL -
1232 *    This contains a bit-mask describing the minimum size frame that
1233 *    will be bundled.  The default masks the lower 7 bits, which means
1234 *    that any frame less than 128 bytes in length will not be bundled,
1235 *    but will instead immediately generate an interrupt.  This does
1236 *    not affect the current bundle in any way.  Any frame that is 128
1237 *    bytes or large will be bundled normally.  This feature is meant
1238 *    to provide immediate indication of ACK frames in a TCP environment.
1239 *    Customers were seeing poor performance when a machine with CPUSaver
1240 *    enabled was sending but not receiving.  The delay introduced when
1241 *    the ACKs were received was enough to reduce total throughput, because
1242 *    the sender would sit idle until the ACK was finally seen.
1243 *
1244 *    The current default is 0xFF80, which masks out the lower 7 bits.
1245 *    This means that any frame which is x7F (127) bytes or smaller
1246 *    will cause an immediate interrupt.  Because this value must be a
1247 *    bit mask, there are only a few valid values that can be used.  To
1248 *    turn this feature off, the driver can write the value xFFFF to the
1249 *    lower word of this instruction (in the same way that the other
1250 *    parameters are used).  Likewise, a value of 0xF800 (2047) would
1251 *    cause an interrupt to be generated for every frame, because all
1252 *    standard Ethernet frames are <= 2047 bytes in length.
1253 *************************************************************************/
1254
1255 /* if you wish to disable the ucode functionality, while maintaining the
1256  * workarounds it provides, set the following defines to:
1257  * BUNDLESMALL 0
1258  * BUNDLEMAX 1
1259  * INTDELAY 1
1260  */
1261 #define BUNDLESMALL 1
1262 #define BUNDLEMAX (u16)6
1263 #define INTDELAY (u16)1536 /* 0x600 */
1264
1265         /* do not load u-code for ICH devices */
1266         if (nic->flags & ich)
1267                 goto noloaducode;
1268
1269         /* Search for ucode match against h/w rev_id */
1270         for (opts = ucode_opts; opts->mac; opts++) {
1271                 int i;
1272                 u32 *ucode = opts->ucode;
1273                 if (nic->mac != opts->mac)
1274                         continue;
1275
1276                 /* Insert user-tunable settings */
1277                 ucode[opts->timer_dword] &= 0xFFFF0000;
1278                 ucode[opts->timer_dword] |= INTDELAY;
1279                 ucode[opts->bundle_dword] &= 0xFFFF0000;
1280                 ucode[opts->bundle_dword] |= BUNDLEMAX;
1281                 ucode[opts->min_size_dword] &= 0xFFFF0000;
1282                 ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
1283
1284                 for (i = 0; i < UCODE_SIZE; i++)
1285                         cb->u.ucode[i] = cpu_to_le32(ucode[i]);
1286                 cb->command = cpu_to_le16(cb_ucode | cb_el);
1287                 return;
1288         }
1289
1290 noloaducode:
1291         cb->command = cpu_to_le16(cb_nop | cb_el);
1292 }
1293
1294 static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
1295         void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
1296 {
1297         int err = 0, counter = 50;
1298         struct cb *cb = nic->cb_to_clean;
1299
1300         if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
1301                 DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
1302
1303         /* must restart cuc */
1304         nic->cuc_cmd = cuc_start;
1305
1306         /* wait for completion */
1307         e100_write_flush(nic);
1308         udelay(10);
1309
1310         /* wait for possibly (ouch) 500ms */
1311         while (!(cb->status & cpu_to_le16(cb_complete))) {
1312                 msleep(10);
1313                 if (!--counter) break;
1314         }
1315
1316         /* ack any interupts, something could have been set */
1317         iowrite8(~0, &nic->csr->scb.stat_ack);
1318
1319         /* if the command failed, or is not OK, notify and return */
1320         if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
1321                 DPRINTK(PROBE,ERR, "ucode load failed\n");
1322                 err = -EPERM;
1323         }
1324
1325         return err;
1326 }
1327
1328 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
1329         struct sk_buff *skb)
1330 {
1331         cb->command = cpu_to_le16(cb_iaaddr);
1332         memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
1333 }
1334
1335 static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1336 {
1337         cb->command = cpu_to_le16(cb_dump);
1338         cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
1339                 offsetof(struct mem, dump_buf));
1340 }
1341
1342 #define NCONFIG_AUTO_SWITCH     0x0080
1343 #define MII_NSC_CONG            MII_RESV1
1344 #define NSC_CONG_ENABLE         0x0100
1345 #define NSC_CONG_TXREADY        0x0400
1346 #define ADVERTISE_FC_SUPPORTED  0x0400
1347 static int e100_phy_init(struct nic *nic)
1348 {
1349         struct net_device *netdev = nic->netdev;
1350         u32 addr;
1351         u16 bmcr, stat, id_lo, id_hi, cong;
1352
1353         /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
1354         for(addr = 0; addr < 32; addr++) {
1355                 nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
1356                 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
1357                 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
1358                 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
1359                 if(!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
1360                         break;
1361         }
1362         DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
1363         if(addr == 32)
1364                 return -EAGAIN;
1365
1366         /* Selected the phy and isolate the rest */
1367         for(addr = 0; addr < 32; addr++) {
1368                 if(addr != nic->mii.phy_id) {
1369                         mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
1370                 } else {
1371                         bmcr = mdio_read(netdev, addr, MII_BMCR);
1372                         mdio_write(netdev, addr, MII_BMCR,
1373                                 bmcr & ~BMCR_ISOLATE);
1374                 }
1375         }
1376
1377         /* Get phy ID */
1378         id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
1379         id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
1380         nic->phy = (u32)id_hi << 16 | (u32)id_lo;
1381         DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
1382
1383         /* Handle National tx phys */
1384 #define NCS_PHY_MODEL_MASK      0xFFF0FFFF
1385         if((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
1386                 /* Disable congestion control */
1387                 cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
1388                 cong |= NSC_CONG_TXREADY;
1389                 cong &= ~NSC_CONG_ENABLE;
1390                 mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
1391         }
1392
1393         if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
1394            (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
1395                 !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
1396                 /* enable/disable MDI/MDI-X auto-switching. */
1397                 mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
1398                                 nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
1399         }
1400
1401         return 0;
1402 }
1403
1404 static int e100_hw_init(struct nic *nic)
1405 {
1406         int err;
1407
1408         e100_hw_reset(nic);
1409
1410         DPRINTK(HW, ERR, "e100_hw_init\n");
1411         if(!in_interrupt() && (err = e100_self_test(nic)))
1412                 return err;
1413
1414         if((err = e100_phy_init(nic)))
1415                 return err;
1416         if((err = e100_exec_cmd(nic, cuc_load_base, 0)))
1417                 return err;
1418         if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
1419                 return err;
1420         if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
1421                 return err;
1422         if((err = e100_exec_cb(nic, NULL, e100_configure)))
1423                 return err;
1424         if((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
1425                 return err;
1426         if((err = e100_exec_cmd(nic, cuc_dump_addr,
1427                 nic->dma_addr + offsetof(struct mem, stats))))
1428                 return err;
1429         if((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
1430                 return err;
1431
1432         e100_disable_irq(nic);
1433
1434         return 0;
1435 }
1436
1437 static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
1438 {
1439         struct net_device *netdev = nic->netdev;
1440         struct dev_mc_list *list = netdev->mc_list;
1441         u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
1442
1443         cb->command = cpu_to_le16(cb_multi);
1444         cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
1445         for(i = 0; list && i < count; i++, list = list->next)
1446                 memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
1447                         ETH_ALEN);
1448 }
1449
1450 static void e100_set_multicast_list(struct net_device *netdev)
1451 {
1452         struct nic *nic = netdev_priv(netdev);
1453
1454         DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
1455                 netdev->mc_count, netdev->flags);
1456
1457         if(netdev->flags & IFF_PROMISC)
1458                 nic->flags |= promiscuous;
1459         else
1460                 nic->flags &= ~promiscuous;
1461
1462         if(netdev->flags & IFF_ALLMULTI ||
1463                 netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
1464                 nic->flags |= multicast_all;
1465         else
1466                 nic->flags &= ~multicast_all;
1467
1468         e100_exec_cb(nic, NULL, e100_configure);
1469         e100_exec_cb(nic, NULL, e100_multi);
1470 }
1471
1472 static void e100_update_stats(struct nic *nic)
1473 {
1474         struct net_device_stats *ns = &nic->net_stats;
1475         struct stats *s = &nic->mem->stats;
1476         u32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
1477                 (nic->mac < mac_82559_D101M) ? (u32 *)&s->xmt_tco_frames :
1478                 &s->complete;
1479
1480         /* Device's stats reporting may take several microseconds to
1481          * complete, so where always waiting for results of the
1482          * previous command. */
1483
1484         if(*complete == le32_to_cpu(cuc_dump_reset_complete)) {
1485                 *complete = 0;
1486                 nic->tx_frames = le32_to_cpu(s->tx_good_frames);
1487                 nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
1488                 ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
1489                 ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
1490                 ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
1491                 ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
1492                 ns->collisions += nic->tx_collisions;
1493                 ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
1494                         le32_to_cpu(s->tx_lost_crs);
1495                 ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
1496                         nic->rx_over_length_errors;
1497                 ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
1498                 ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
1499                 ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
1500                 ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
1501                 ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
1502                 ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
1503                         le32_to_cpu(s->rx_alignment_errors) +
1504                         le32_to_cpu(s->rx_short_frame_errors) +
1505                         le32_to_cpu(s->rx_cdt_errors);
1506                 nic->tx_deferred += le32_to_cpu(s->tx_deferred);
1507                 nic->tx_single_collisions +=
1508                         le32_to_cpu(s->tx_single_collisions);
1509                 nic->tx_multiple_collisions +=
1510                         le32_to_cpu(s->tx_multiple_collisions);
1511                 if(nic->mac >= mac_82558_D101_A4) {
1512                         nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
1513                         nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
1514                         nic->rx_fc_unsupported +=
1515                                 le32_to_cpu(s->fc_rcv_unsupported);
1516                         if(nic->mac >= mac_82559_D101M) {
1517                                 nic->tx_tco_frames +=
1518                                         le16_to_cpu(s->xmt_tco_frames);
1519                                 nic->rx_tco_frames +=
1520                                         le16_to_cpu(s->rcv_tco_frames);
1521                         }
1522                 }
1523         }
1524
1525
1526         if(e100_exec_cmd(nic, cuc_dump_reset, 0))
1527                 DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
1528 }
1529
1530 static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
1531 {
1532         /* Adjust inter-frame-spacing (IFS) between two transmits if
1533          * we're getting collisions on a half-duplex connection. */
1534
1535         if(duplex == DUPLEX_HALF) {
1536                 u32 prev = nic->adaptive_ifs;
1537                 u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
1538
1539                 if((nic->tx_frames / 32 < nic->tx_collisions) &&
1540                    (nic->tx_frames > min_frames)) {
1541                         if(nic->adaptive_ifs < 60)
1542                                 nic->adaptive_ifs += 5;
1543                 } else if (nic->tx_frames < min_frames) {
1544                         if(nic->adaptive_ifs >= 5)
1545                                 nic->adaptive_ifs -= 5;
1546                 }
1547                 if(nic->adaptive_ifs != prev)
1548                         e100_exec_cb(nic, NULL, e100_configure);
1549         }
1550 }
1551
1552 static void e100_watchdog(unsigned long data)
1553 {
1554         struct nic *nic = (struct nic *)data;
1555         struct ethtool_cmd cmd;
1556
1557         DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
1558
1559         /* mii library handles link maintenance tasks */
1560
1561         mii_ethtool_gset(&nic->mii, &cmd);
1562
1563         if(mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
1564                 DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n",
1565                         cmd.speed == SPEED_100 ? "100" : "10",
1566                         cmd.duplex == DUPLEX_FULL ? "full" : "half");
1567         } else if(!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
1568                 DPRINTK(LINK, INFO, "link down\n");
1569         }
1570
1571         mii_check_link(&nic->mii);
1572
1573         /* Software generated interrupt to recover from (rare) Rx
1574          * allocation failure.
1575          * Unfortunately have to use a spinlock to not re-enable interrupts
1576          * accidentally, due to hardware that shares a register between the
1577          * interrupt mask bit and the SW Interrupt generation bit */
1578         spin_lock_irq(&nic->cmd_lock);
1579         iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
1580         e100_write_flush(nic);
1581         spin_unlock_irq(&nic->cmd_lock);
1582
1583         e100_update_stats(nic);
1584         e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
1585
1586         if(nic->mac <= mac_82557_D100_C)
1587                 /* Issue a multicast command to workaround a 557 lock up */
1588                 e100_set_multicast_list(nic->netdev);
1589
1590         if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
1591                 /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
1592                 nic->flags |= ich_10h_workaround;
1593         else
1594                 nic->flags &= ~ich_10h_workaround;
1595
1596         mod_timer(&nic->watchdog, jiffies + E100_WATCHDOG_PERIOD);
1597 }
1598
1599 static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
1600         struct sk_buff *skb)
1601 {
1602         cb->command = nic->tx_command;
1603         /* interrupt every 16 packets regardless of delay */
1604         if((nic->cbs_avail & ~15) == nic->cbs_avail)
1605                 cb->command |= cpu_to_le16(cb_i);
1606         cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
1607         cb->u.tcb.tcb_byte_count = 0;
1608         cb->u.tcb.threshold = nic->tx_threshold;
1609         cb->u.tcb.tbd_count = 1;
1610         cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
1611                 skb->data, skb->len, PCI_DMA_TODEVICE));
1612         /* check for mapping failure? */
1613         cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
1614 }
1615
1616 static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
1617 {
1618         struct nic *nic = netdev_priv(netdev);
1619         int err;
1620
1621         if(nic->flags & ich_10h_workaround) {
1622                 /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
1623                    Issue a NOP command followed by a 1us delay before
1624                    issuing the Tx command. */
1625                 if(e100_exec_cmd(nic, cuc_nop, 0))
1626                         DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
1627                 udelay(1);
1628         }
1629
1630         err = e100_exec_cb(nic, skb, e100_xmit_prepare);
1631
1632         switch(err) {
1633         case -ENOSPC:
1634                 /* We queued the skb, but now we're out of space. */
1635                 DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
1636                 netif_stop_queue(netdev);
1637                 break;
1638         case -ENOMEM:
1639                 /* This is a hard error - log it. */
1640                 DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
1641                 netif_stop_queue(netdev);
1642                 return 1;
1643         }
1644
1645         netdev->trans_start = jiffies;
1646         return 0;
1647 }
1648
1649 static int e100_tx_clean(struct nic *nic)
1650 {
1651         struct cb *cb;
1652         int tx_cleaned = 0;
1653
1654         spin_lock(&nic->cb_lock);
1655
1656         /* Clean CBs marked complete */
1657         for(cb = nic->cb_to_clean;
1658             cb->status & cpu_to_le16(cb_complete);
1659             cb = nic->cb_to_clean = cb->next) {
1660                 DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
1661                         (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
1662                         cb->status);
1663
1664                 if(likely(cb->skb != NULL)) {
1665                         nic->net_stats.tx_packets++;
1666                         nic->net_stats.tx_bytes += cb->skb->len;
1667
1668                         pci_unmap_single(nic->pdev,
1669                                 le32_to_cpu(cb->u.tcb.tbd.buf_addr),
1670                                 le16_to_cpu(cb->u.tcb.tbd.size),
1671                                 PCI_DMA_TODEVICE);
1672                         dev_kfree_skb_any(cb->skb);
1673                         cb->skb = NULL;
1674                         tx_cleaned = 1;
1675                 }
1676                 cb->status = 0;
1677                 nic->cbs_avail++;
1678         }
1679
1680         spin_unlock(&nic->cb_lock);
1681
1682         /* Recover from running out of Tx resources in xmit_frame */
1683         if(unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
1684                 netif_wake_queue(nic->netdev);
1685
1686         return tx_cleaned;
1687 }
1688
1689 static void e100_clean_cbs(struct nic *nic)
1690 {
1691         if(nic->cbs) {
1692                 while(nic->cbs_avail != nic->params.cbs.count) {
1693                         struct cb *cb = nic->cb_to_clean;
1694                         if(cb->skb) {
1695                                 pci_unmap_single(nic->pdev,
1696                                         le32_to_cpu(cb->u.tcb.tbd.buf_addr),
1697                                         le16_to_cpu(cb->u.tcb.tbd.size),
1698                                         PCI_DMA_TODEVICE);
1699                                 dev_kfree_skb(cb->skb);
1700                         }
1701                         nic->cb_to_clean = nic->cb_to_clean->next;
1702                         nic->cbs_avail++;
1703                 }
1704                 pci_free_consistent(nic->pdev,
1705                         sizeof(struct cb) * nic->params.cbs.count,
1706                         nic->cbs, nic->cbs_dma_addr);
1707                 nic->cbs = NULL;
1708                 nic->cbs_avail = 0;
1709         }
1710         nic->cuc_cmd = cuc_start;
1711         nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
1712                 nic->cbs;
1713 }
1714
1715 static int e100_alloc_cbs(struct nic *nic)
1716 {
1717         struct cb *cb;
1718         unsigned int i, count = nic->params.cbs.count;
1719
1720         nic->cuc_cmd = cuc_start;
1721         nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
1722         nic->cbs_avail = 0;
1723
1724         nic->cbs = pci_alloc_consistent(nic->pdev,
1725                 sizeof(struct cb) * count, &nic->cbs_dma_addr);
1726         if(!nic->cbs)
1727                 return -ENOMEM;
1728
1729         for(cb = nic->cbs, i = 0; i < count; cb++, i++) {
1730                 cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
1731                 cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
1732
1733                 cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
1734                 cb->link = cpu_to_le32(nic->cbs_dma_addr +
1735                         ((i+1) % count) * sizeof(struct cb));
1736                 cb->skb = NULL;
1737         }
1738
1739         nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
1740         nic->cbs_avail = count;
1741
1742         return 0;
1743 }
1744
1745 static inline void e100_start_receiver(struct nic *nic)
1746 {
1747         /* Start if RFA is non-NULL */
1748         if(nic->rx_to_clean->skb)
1749                 e100_exec_cmd(nic, ruc_start, nic->rx_to_clean->dma_addr);
1750 }
1751
1752 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
1753 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
1754 {
1755         if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
1756                 return -ENOMEM;
1757
1758         /* Align, init, and map the RFD. */
1759         skb_reserve(rx->skb, NET_IP_ALIGN);
1760         skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
1761         rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
1762                 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
1763
1764         if(pci_dma_mapping_error(rx->dma_addr)) {
1765                 dev_kfree_skb_any(rx->skb);
1766                 rx->skb = NULL;
1767                 rx->dma_addr = 0;
1768                 return -ENOMEM;
1769         }
1770
1771         /* Link the RFD to end of RFA by linking previous RFD to
1772          * this one, and clearing EL bit of previous.  */
1773         if(rx->prev->skb) {
1774                 struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
1775                 put_unaligned(cpu_to_le32(rx->dma_addr),
1776                         (u32 *)&prev_rfd->link);
1777                 wmb();
1778                 prev_rfd->command &= ~cpu_to_le16(cb_el & cb_s);
1779                 pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
1780                         sizeof(struct rfd), PCI_DMA_TODEVICE);
1781         }
1782
1783         return 0;
1784 }
1785
1786 static int e100_rx_indicate(struct nic *nic, struct rx *rx,
1787         unsigned int *work_done, unsigned int work_to_do)
1788 {
1789         struct sk_buff *skb = rx->skb;
1790         struct rfd *rfd = (struct rfd *)skb->data;
1791         u16 rfd_status, actual_size;
1792
1793         if(unlikely(work_done && *work_done >= work_to_do))
1794                 return -EAGAIN;
1795
1796         /* Need to sync before taking a peek at cb_complete bit */
1797         pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
1798                 sizeof(struct rfd), PCI_DMA_FROMDEVICE);
1799         rfd_status = le16_to_cpu(rfd->status);
1800
1801         DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
1802
1803         /* If data isn't ready, nothing to indicate */
1804         if(unlikely(!(rfd_status & cb_complete)))
1805                 return -ENODATA;
1806
1807         /* Get actual data size */
1808         actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
1809         if(unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
1810                 actual_size = RFD_BUF_LEN - sizeof(struct rfd);
1811
1812         /* Get data */
1813         pci_unmap_single(nic->pdev, rx->dma_addr,
1814                 RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
1815
1816         /* Pull off the RFD and put the actual data (minus eth hdr) */
1817         skb_reserve(skb, sizeof(struct rfd));
1818         skb_put(skb, actual_size);
1819         skb->protocol = eth_type_trans(skb, nic->netdev);
1820
1821         if(unlikely(!(rfd_status & cb_ok))) {
1822                 /* Don't indicate if hardware indicates errors */
1823                 dev_kfree_skb_any(skb);
1824         } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
1825                 /* Don't indicate oversized frames */
1826                 nic->rx_over_length_errors++;
1827                 dev_kfree_skb_any(skb);
1828         } else {
1829                 nic->net_stats.rx_packets++;
1830                 nic->net_stats.rx_bytes += actual_size;
1831                 nic->netdev->last_rx = jiffies;
1832                 netif_receive_skb(skb);
1833                 if(work_done)
1834                         (*work_done)++;
1835         }
1836
1837         rx->skb = NULL;
1838
1839         return 0;
1840 }
1841
1842 static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
1843         unsigned int work_to_do)
1844 {
1845         struct rx *rx;
1846
1847         /* Indicate newly arrived packets */
1848         for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
1849                 if(e100_rx_indicate(nic, rx, work_done, work_to_do))
1850                         break; /* No more to clean */
1851         }
1852
1853         /* Alloc new skbs to refill list */
1854         for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
1855                 if(unlikely(e100_rx_alloc_skb(nic, rx)))
1856                         break; /* Better luck next time (see watchdog) */
1857         }
1858 }
1859
1860 static void e100_rx_clean_list(struct nic *nic)
1861 {
1862         struct rx *rx;
1863         unsigned int i, count = nic->params.rfds.count;
1864
1865         if(nic->rxs) {
1866                 for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
1867                         if(rx->skb) {
1868                                 pci_unmap_single(nic->pdev, rx->dma_addr,
1869                                         RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
1870                                 dev_kfree_skb(rx->skb);
1871                         }
1872                 }
1873                 kfree(nic->rxs);
1874                 nic->rxs = NULL;
1875         }
1876
1877         nic->rx_to_use = nic->rx_to_clean = NULL;
1878 }
1879
1880 static int e100_rx_alloc_list(struct nic *nic)
1881 {
1882         struct rx *rx;
1883         unsigned int i, count = nic->params.rfds.count;
1884
1885         nic->rx_to_use = nic->rx_to_clean = NULL;
1886
1887         if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
1888                 return -ENOMEM;
1889
1890         for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
1891                 rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
1892                 rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
1893                 if(e100_rx_alloc_skb(nic, rx)) {
1894                         e100_rx_clean_list(nic);
1895                         return -ENOMEM;
1896                 }
1897         }
1898
1899         nic->rx_to_use = nic->rx_to_clean = nic->rxs;
1900
1901         return 0;
1902 }
1903
1904 static irqreturn_t e100_intr(int irq, void *dev_id)
1905 {
1906         struct net_device *netdev = dev_id;
1907         struct nic *nic = netdev_priv(netdev);
1908         u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
1909
1910         DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
1911
1912         if(stat_ack == stat_ack_not_ours ||     /* Not our interrupt */
1913            stat_ack == stat_ack_not_present)    /* Hardware is ejected */
1914                 return IRQ_NONE;
1915
1916         /* Ack interrupt(s) */
1917         iowrite8(stat_ack, &nic->csr->scb.stat_ack);
1918
1919         if(likely(netif_rx_schedule_prep(netdev))) {
1920                 e100_disable_irq(nic);
1921                 __netif_rx_schedule(netdev);
1922         }
1923
1924         return IRQ_HANDLED;
1925 }
1926
1927 static int e100_poll(struct net_device *netdev, int *budget)
1928 {
1929         struct nic *nic = netdev_priv(netdev);
1930         unsigned int work_to_do = min(netdev->quota, *budget);
1931         unsigned int work_done = 0;
1932         int tx_cleaned;
1933
1934         e100_rx_clean(nic, &work_done, work_to_do);
1935         tx_cleaned = e100_tx_clean(nic);
1936
1937         /* If no Rx and Tx cleanup work was done, exit polling mode. */
1938         if((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) {
1939                 netif_rx_complete(netdev);
1940                 e100_enable_irq(nic);
1941                 return 0;
1942         }
1943
1944         *budget -= work_done;
1945         netdev->quota -= work_done;
1946
1947         return 1;
1948 }
1949
1950 #ifdef CONFIG_NET_POLL_CONTROLLER
1951 static void e100_netpoll(struct net_device *netdev)
1952 {
1953         struct nic *nic = netdev_priv(netdev);
1954
1955         e100_disable_irq(nic);
1956         e100_intr(nic->pdev->irq, netdev);
1957         e100_tx_clean(nic);
1958         e100_enable_irq(nic);
1959 }
1960 #endif
1961
1962 static struct net_device_stats *e100_get_stats(struct net_device *netdev)
1963 {
1964         struct nic *nic = netdev_priv(netdev);
1965         return &nic->net_stats;
1966 }
1967
1968 static int e100_set_mac_address(struct net_device *netdev, void *p)
1969 {
1970         struct nic *nic = netdev_priv(netdev);
1971         struct sockaddr *addr = p;
1972
1973         if (!is_valid_ether_addr(addr->sa_data))
1974                 return -EADDRNOTAVAIL;
1975
1976         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
1977         e100_exec_cb(nic, NULL, e100_setup_iaaddr);
1978
1979         return 0;
1980 }
1981
1982 static int e100_change_mtu(struct net_device *netdev, int new_mtu)
1983 {
1984         if(new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
1985                 return -EINVAL;
1986         netdev->mtu = new_mtu;
1987         return 0;
1988 }
1989
1990 static int e100_asf(struct nic *nic)
1991 {
1992         /* ASF can be enabled from eeprom */
1993         return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
1994            (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
1995            !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
1996            ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
1997 }
1998
1999 static int e100_up(struct nic *nic)
2000 {
2001         int err;
2002
2003         if((err = e100_rx_alloc_list(nic)))
2004                 return err;
2005         if((err = e100_alloc_cbs(nic)))
2006                 goto err_rx_clean_list;
2007         if((err = e100_hw_init(nic)))
2008                 goto err_clean_cbs;
2009         e100_set_multicast_list(nic->netdev);
2010         e100_start_receiver(nic);
2011         mod_timer(&nic->watchdog, jiffies);
2012         if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
2013                 nic->netdev->name, nic->netdev)))
2014                 goto err_no_irq;
2015         netif_wake_queue(nic->netdev);
2016         netif_poll_enable(nic->netdev);
2017         /* enable ints _after_ enabling poll, preventing a race between
2018          * disable ints+schedule */
2019         e100_enable_irq(nic);
2020         return 0;
2021
2022 err_no_irq:
2023         del_timer_sync(&nic->watchdog);
2024 err_clean_cbs:
2025         e100_clean_cbs(nic);
2026 err_rx_clean_list:
2027         e100_rx_clean_list(nic);
2028         return err;
2029 }
2030
2031 static void e100_down(struct nic *nic)
2032 {
2033         /* wait here for poll to complete */
2034         netif_poll_disable(nic->netdev);
2035         netif_stop_queue(nic->netdev);
2036         e100_hw_reset(nic);
2037         free_irq(nic->pdev->irq, nic->netdev);
2038         del_timer_sync(&nic->watchdog);
2039         netif_carrier_off(nic->netdev);
2040         e100_clean_cbs(nic);
2041         e100_rx_clean_list(nic);
2042 }
2043
2044 static void e100_tx_timeout(struct net_device *netdev)
2045 {
2046         struct nic *nic = netdev_priv(netdev);
2047
2048         /* Reset outside of interrupt context, to avoid request_irq
2049          * in interrupt context */
2050         schedule_work(&nic->tx_timeout_task);
2051 }
2052
2053 static void e100_tx_timeout_task(struct work_struct *work)
2054 {
2055         struct nic *nic = container_of(work, struct nic, tx_timeout_task);
2056         struct net_device *netdev = nic->netdev;
2057
2058         DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
2059                 ioread8(&nic->csr->scb.status));
2060         e100_down(netdev_priv(netdev));
2061         e100_up(netdev_priv(netdev));
2062 }
2063
2064 static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
2065 {
2066         int err;
2067         struct sk_buff *skb;
2068
2069         /* Use driver resources to perform internal MAC or PHY
2070          * loopback test.  A single packet is prepared and transmitted
2071          * in loopback mode, and the test passes if the received
2072          * packet compares byte-for-byte to the transmitted packet. */
2073
2074         if((err = e100_rx_alloc_list(nic)))
2075                 return err;
2076         if((err = e100_alloc_cbs(nic)))
2077                 goto err_clean_rx;
2078
2079         /* ICH PHY loopback is broken so do MAC loopback instead */
2080         if(nic->flags & ich && loopback_mode == lb_phy)
2081                 loopback_mode = lb_mac;
2082
2083         nic->loopback = loopback_mode;
2084         if((err = e100_hw_init(nic)))
2085                 goto err_loopback_none;
2086
2087         if(loopback_mode == lb_phy)
2088                 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
2089                         BMCR_LOOPBACK);
2090
2091         e100_start_receiver(nic);
2092
2093         if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
2094                 err = -ENOMEM;
2095                 goto err_loopback_none;
2096         }
2097         skb_put(skb, ETH_DATA_LEN);
2098         memset(skb->data, 0xFF, ETH_DATA_LEN);
2099         e100_xmit_frame(skb, nic->netdev);
2100
2101         msleep(10);
2102
2103         pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
2104                         RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
2105
2106         if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
2107            skb->data, ETH_DATA_LEN))
2108                 err = -EAGAIN;
2109
2110 err_loopback_none:
2111         mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
2112         nic->loopback = lb_none;
2113         e100_clean_cbs(nic);
2114         e100_hw_reset(nic);
2115 err_clean_rx:
2116         e100_rx_clean_list(nic);
2117         return err;
2118 }
2119
2120 #define MII_LED_CONTROL 0x1B
2121 static void e100_blink_led(unsigned long data)
2122 {
2123         struct nic *nic = (struct nic *)data;
2124         enum led_state {
2125                 led_on     = 0x01,
2126                 led_off    = 0x04,
2127                 led_on_559 = 0x05,
2128                 led_on_557 = 0x07,
2129         };
2130
2131         nic->leds = (nic->leds & led_on) ? led_off :
2132                 (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
2133         mdio_write(nic->netdev, nic->mii.phy_id, MII_LED_CONTROL, nic->leds);
2134         mod_timer(&nic->blink_timer, jiffies + HZ / 4);
2135 }
2136
2137 static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
2138 {
2139         struct nic *nic = netdev_priv(netdev);
2140         return mii_ethtool_gset(&nic->mii, cmd);
2141 }
2142
2143 static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
2144 {
2145         struct nic *nic = netdev_priv(netdev);
2146         int err;
2147
2148         mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
2149         err = mii_ethtool_sset(&nic->mii, cmd);
2150         e100_exec_cb(nic, NULL, e100_configure);
2151
2152         return err;
2153 }
2154
2155 static void e100_get_drvinfo(struct net_device *netdev,
2156         struct ethtool_drvinfo *info)
2157 {
2158         struct nic *nic = netdev_priv(netdev);
2159         strcpy(info->driver, DRV_NAME);
2160         strcpy(info->version, DRV_VERSION);
2161         strcpy(info->fw_version, "N/A");
2162         strcpy(info->bus_info, pci_name(nic->pdev));
2163 }
2164
2165 static int e100_get_regs_len(struct net_device *netdev)
2166 {
2167         struct nic *nic = netdev_priv(netdev);
2168 #define E100_PHY_REGS           0x1C
2169 #define E100_REGS_LEN           1 + E100_PHY_REGS + \
2170         sizeof(nic->mem->dump_buf) / sizeof(u32)
2171         return E100_REGS_LEN * sizeof(u32);
2172 }
2173
2174 static void e100_get_regs(struct net_device *netdev,
2175         struct ethtool_regs *regs, void *p)
2176 {
2177         struct nic *nic = netdev_priv(netdev);
2178         u32 *buff = p;
2179         int i;
2180
2181         regs->version = (1 << 24) | nic->rev_id;
2182         buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
2183                 ioread8(&nic->csr->scb.cmd_lo) << 16 |
2184                 ioread16(&nic->csr->scb.status);
2185         for(i = E100_PHY_REGS; i >= 0; i--)
2186                 buff[1 + E100_PHY_REGS - i] =
2187                         mdio_read(netdev, nic->mii.phy_id, i);
2188         memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
2189         e100_exec_cb(nic, NULL, e100_dump);
2190         msleep(10);
2191         memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
2192                 sizeof(nic->mem->dump_buf));
2193 }
2194
2195 static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2196 {
2197         struct nic *nic = netdev_priv(netdev);
2198         wol->supported = (nic->mac >= mac_82558_D101_A4) ?  WAKE_MAGIC : 0;
2199         wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
2200 }
2201
2202 static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2203 {
2204         struct nic *nic = netdev_priv(netdev);
2205
2206         if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
2207                 return -EOPNOTSUPP;
2208
2209         if(wol->wolopts)
2210                 nic->flags |= wol_magic;
2211         else
2212                 nic->flags &= ~wol_magic;
2213
2214         e100_exec_cb(nic, NULL, e100_configure);
2215
2216         return 0;
2217 }
2218
2219 static u32 e100_get_msglevel(struct net_device *netdev)
2220 {
2221         struct nic *nic = netdev_priv(netdev);
2222         return nic->msg_enable;
2223 }
2224
2225 static void e100_set_msglevel(struct net_device *netdev, u32 value)
2226 {
2227         struct nic *nic = netdev_priv(netdev);
2228         nic->msg_enable = value;
2229 }
2230
2231 static int e100_nway_reset(struct net_device *netdev)
2232 {
2233         struct nic *nic = netdev_priv(netdev);
2234         return mii_nway_restart(&nic->mii);
2235 }
2236
2237 static u32 e100_get_link(struct net_device *netdev)
2238 {
2239         struct nic *nic = netdev_priv(netdev);
2240         return mii_link_ok(&nic->mii);
2241 }
2242
2243 static int e100_get_eeprom_len(struct net_device *netdev)
2244 {
2245         struct nic *nic = netdev_priv(netdev);
2246         return nic->eeprom_wc << 1;
2247 }
2248
2249 #define E100_EEPROM_MAGIC       0x1234
2250 static int e100_get_eeprom(struct net_device *netdev,
2251         struct ethtool_eeprom *eeprom, u8 *bytes)
2252 {
2253         struct nic *nic = netdev_priv(netdev);
2254
2255         eeprom->magic = E100_EEPROM_MAGIC;
2256         memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
2257
2258         return 0;
2259 }
2260
2261 static int e100_set_eeprom(struct net_device *netdev,
2262         struct ethtool_eeprom *eeprom, u8 *bytes)
2263 {
2264         struct nic *nic = netdev_priv(netdev);
2265
2266         if(eeprom->magic != E100_EEPROM_MAGIC)
2267                 return -EINVAL;
2268
2269         memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
2270
2271         return e100_eeprom_save(nic, eeprom->offset >> 1,
2272                 (eeprom->len >> 1) + 1);
2273 }
2274
2275 static void e100_get_ringparam(struct net_device *netdev,
2276         struct ethtool_ringparam *ring)
2277 {
2278         struct nic *nic = netdev_priv(netdev);
2279         struct param_range *rfds = &nic->params.rfds;
2280         struct param_range *cbs = &nic->params.cbs;
2281
2282         ring->rx_max_pending = rfds->max;
2283         ring->tx_max_pending = cbs->max;
2284         ring->rx_mini_max_pending = 0;
2285         ring->rx_jumbo_max_pending = 0;
2286         ring->rx_pending = rfds->count;
2287         ring->tx_pending = cbs->count;
2288         ring->rx_mini_pending = 0;
2289         ring->rx_jumbo_pending = 0;
2290 }
2291
2292 static int e100_set_ringparam(struct net_device *netdev,
2293         struct ethtool_ringparam *ring)
2294 {
2295         struct nic *nic = netdev_priv(netdev);
2296         struct param_range *rfds = &nic->params.rfds;
2297         struct param_range *cbs = &nic->params.cbs;
2298
2299         if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
2300                 return -EINVAL;
2301
2302         if(netif_running(netdev))
2303                 e100_down(nic);
2304         rfds->count = max(ring->rx_pending, rfds->min);
2305         rfds->count = min(rfds->count, rfds->max);
2306         cbs->count = max(ring->tx_pending, cbs->min);
2307         cbs->count = min(cbs->count, cbs->max);
2308         DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
2309                 rfds->count, cbs->count);
2310         if(netif_running(netdev))
2311                 e100_up(nic);
2312
2313         return 0;
2314 }
2315
2316 static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
2317         "Link test     (on/offline)",
2318         "Eeprom test   (on/offline)",
2319         "Self test        (offline)",
2320         "Mac loopback     (offline)",
2321         "Phy loopback     (offline)",
2322 };
2323 #define E100_TEST_LEN   sizeof(e100_gstrings_test) / ETH_GSTRING_LEN
2324
2325 static int e100_diag_test_count(struct net_device *netdev)
2326 {
2327         return E100_TEST_LEN;
2328 }
2329
2330 static void e100_diag_test(struct net_device *netdev,
2331         struct ethtool_test *test, u64 *data)
2332 {
2333         struct ethtool_cmd cmd;
2334         struct nic *nic = netdev_priv(netdev);
2335         int i, err;
2336
2337         memset(data, 0, E100_TEST_LEN * sizeof(u64));
2338         data[0] = !mii_link_ok(&nic->mii);
2339         data[1] = e100_eeprom_load(nic);
2340         if(test->flags & ETH_TEST_FL_OFFLINE) {
2341
2342                 /* save speed, duplex & autoneg settings */
2343                 err = mii_ethtool_gset(&nic->mii, &cmd);
2344
2345                 if(netif_running(netdev))
2346                         e100_down(nic);
2347                 data[2] = e100_self_test(nic);
2348                 data[3] = e100_loopback_test(nic, lb_mac);
2349                 data[4] = e100_loopback_test(nic, lb_phy);
2350
2351                 /* restore speed, duplex & autoneg settings */
2352                 err = mii_ethtool_sset(&nic->mii, &cmd);
2353
2354                 if(netif_running(netdev))
2355                         e100_up(nic);
2356         }
2357         for(i = 0; i < E100_TEST_LEN; i++)
2358                 test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
2359
2360         msleep_interruptible(4 * 1000);
2361 }
2362
2363 static int e100_phys_id(struct net_device *netdev, u32 data)
2364 {
2365         struct nic *nic = netdev_priv(netdev);
2366
2367         if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
2368                 data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
2369         mod_timer(&nic->blink_timer, jiffies);
2370         msleep_interruptible(data * 1000);
2371         del_timer_sync(&nic->blink_timer);
2372         mdio_write(netdev, nic->mii.phy_id, MII_LED_CONTROL, 0);
2373
2374         return 0;
2375 }
2376
2377 static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
2378         "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
2379         "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
2380         "rx_length_errors", "rx_over_errors", "rx_crc_errors",
2381         "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
2382         "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
2383         "tx_heartbeat_errors", "tx_window_errors",
2384         /* device-specific stats */
2385         "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
2386         "tx_flow_control_pause", "rx_flow_control_pause",
2387         "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
2388 };
2389 #define E100_NET_STATS_LEN      21
2390 #define E100_STATS_LEN  sizeof(e100_gstrings_stats) / ETH_GSTRING_LEN
2391
2392 static int e100_get_stats_count(struct net_device *netdev)
2393 {
2394         return E100_STATS_LEN;
2395 }
2396
2397 static void e100_get_ethtool_stats(struct net_device *netdev,
2398         struct ethtool_stats *stats, u64 *data)
2399 {
2400         struct nic *nic = netdev_priv(netdev);
2401         int i;
2402
2403         for(i = 0; i < E100_NET_STATS_LEN; i++)
2404                 data[i] = ((unsigned long *)&nic->net_stats)[i];
2405
2406         data[i++] = nic->tx_deferred;
2407         data[i++] = nic->tx_single_collisions;
2408         data[i++] = nic->tx_multiple_collisions;
2409         data[i++] = nic->tx_fc_pause;
2410         data[i++] = nic->rx_fc_pause;
2411         data[i++] = nic->rx_fc_unsupported;
2412         data[i++] = nic->tx_tco_frames;
2413         data[i++] = nic->rx_tco_frames;
2414 }
2415
2416 static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
2417 {
2418         switch(stringset) {
2419         case ETH_SS_TEST:
2420                 memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
2421                 break;
2422         case ETH_SS_STATS:
2423                 memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
2424                 break;
2425         }
2426 }
2427
2428 static const struct ethtool_ops e100_ethtool_ops = {
2429         .get_settings           = e100_get_settings,
2430         .set_settings           = e100_set_settings,
2431         .get_drvinfo            = e100_get_drvinfo,
2432         .get_regs_len           = e100_get_regs_len,
2433         .get_regs               = e100_get_regs,
2434         .get_wol                = e100_get_wol,
2435         .set_wol                = e100_set_wol,
2436         .get_msglevel           = e100_get_msglevel,
2437         .set_msglevel           = e100_set_msglevel,
2438         .nway_reset             = e100_nway_reset,
2439         .get_link               = e100_get_link,
2440         .get_eeprom_len         = e100_get_eeprom_len,
2441         .get_eeprom             = e100_get_eeprom,
2442         .set_eeprom             = e100_set_eeprom,
2443         .get_ringparam          = e100_get_ringparam,
2444         .set_ringparam          = e100_set_ringparam,
2445         .self_test_count        = e100_diag_test_count,
2446         .self_test              = e100_diag_test,
2447         .get_strings            = e100_get_strings,
2448         .phys_id                = e100_phys_id,
2449         .get_stats_count        = e100_get_stats_count,
2450         .get_ethtool_stats      = e100_get_ethtool_stats,
2451         .get_perm_addr          = ethtool_op_get_perm_addr,
2452 };
2453
2454 static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
2455 {
2456         struct nic *nic = netdev_priv(netdev);
2457
2458         return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
2459 }
2460
2461 static int e100_alloc(struct nic *nic)
2462 {
2463         nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
2464                 &nic->dma_addr);
2465         return nic->mem ? 0 : -ENOMEM;
2466 }
2467
2468 static void e100_free(struct nic *nic)
2469 {
2470         if(nic->mem) {
2471                 pci_free_consistent(nic->pdev, sizeof(struct mem),
2472                         nic->mem, nic->dma_addr);
2473                 nic->mem = NULL;
2474         }
2475 }
2476
2477 static int e100_open(struct net_device *netdev)
2478 {
2479         struct nic *nic = netdev_priv(netdev);
2480         int err = 0;
2481
2482         netif_carrier_off(netdev);
2483         if((err = e100_up(nic)))
2484                 DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
2485         return err;
2486 }
2487
2488 static int e100_close(struct net_device *netdev)
2489 {
2490         e100_down(netdev_priv(netdev));
2491         return 0;
2492 }
2493
2494 static int __devinit e100_probe(struct pci_dev *pdev,
2495         const struct pci_device_id *ent)
2496 {
2497         struct net_device *netdev;
2498         struct nic *nic;
2499         int err;
2500
2501         if(!(netdev = alloc_etherdev(sizeof(struct nic)))) {
2502                 if(((1 << debug) - 1) & NETIF_MSG_PROBE)
2503                         printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
2504                 return -ENOMEM;
2505         }
2506
2507         netdev->open = e100_open;
2508         netdev->stop = e100_close;
2509         netdev->hard_start_xmit = e100_xmit_frame;
2510         netdev->get_stats = e100_get_stats;
2511         netdev->set_multicast_list = e100_set_multicast_list;
2512         netdev->set_mac_address = e100_set_mac_address;
2513         netdev->change_mtu = e100_change_mtu;
2514         netdev->do_ioctl = e100_do_ioctl;
2515         SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
2516         netdev->tx_timeout = e100_tx_timeout;
2517         netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
2518         netdev->poll = e100_poll;
2519         netdev->weight = E100_NAPI_WEIGHT;
2520 #ifdef CONFIG_NET_POLL_CONTROLLER
2521         netdev->poll_controller = e100_netpoll;
2522 #endif
2523         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
2524
2525         nic = netdev_priv(netdev);
2526         nic->netdev = netdev;
2527         nic->pdev = pdev;
2528         nic->msg_enable = (1 << debug) - 1;
2529         pci_set_drvdata(pdev, netdev);
2530
2531         if((err = pci_enable_device(pdev))) {
2532                 DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
2533                 goto err_out_free_dev;
2534         }
2535
2536         if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2537                 DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
2538                         "base address, aborting.\n");
2539                 err = -ENODEV;
2540                 goto err_out_disable_pdev;
2541         }
2542
2543         if((err = pci_request_regions(pdev, DRV_NAME))) {
2544                 DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
2545                 goto err_out_disable_pdev;
2546         }
2547
2548         if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
2549                 DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
2550                 goto err_out_free_res;
2551         }
2552
2553         SET_MODULE_OWNER(netdev);
2554         SET_NETDEV_DEV(netdev, &pdev->dev);
2555
2556         if (use_io)
2557                 DPRINTK(PROBE, INFO, "using i/o access mode\n");
2558
2559         nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
2560         if(!nic->csr) {
2561                 DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
2562                 err = -ENOMEM;
2563                 goto err_out_free_res;
2564         }
2565
2566         if(ent->driver_data)
2567                 nic->flags |= ich;
2568         else
2569                 nic->flags &= ~ich;
2570
2571         e100_get_defaults(nic);
2572
2573         /* locks must be initialized before calling hw_reset */
2574         spin_lock_init(&nic->cb_lock);
2575         spin_lock_init(&nic->cmd_lock);
2576         spin_lock_init(&nic->mdio_lock);
2577
2578         /* Reset the device before pci_set_master() in case device is in some
2579          * funky state and has an interrupt pending - hint: we don't have the
2580          * interrupt handler registered yet. */
2581         e100_hw_reset(nic);
2582
2583         pci_set_master(pdev);
2584
2585         init_timer(&nic->watchdog);
2586         nic->watchdog.function = e100_watchdog;
2587         nic->watchdog.data = (unsigned long)nic;
2588         init_timer(&nic->blink_timer);
2589         nic->blink_timer.function = e100_blink_led;
2590         nic->blink_timer.data = (unsigned long)nic;
2591
2592         INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
2593
2594         if((err = e100_alloc(nic))) {
2595                 DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
2596                 goto err_out_iounmap;
2597         }
2598
2599         if((err = e100_eeprom_load(nic)))
2600                 goto err_out_free;
2601
2602         e100_phy_init(nic);
2603
2604         memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
2605         memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
2606         if (!is_valid_ether_addr(netdev->perm_addr)) {
2607                 if (!eeprom_bad_csum_allow) {
2608                         DPRINTK(PROBE, ERR, "Invalid MAC address from "
2609                                 "EEPROM, aborting.\n");
2610                         err = -EAGAIN;
2611                         goto err_out_free;
2612                 } else {
2613                         DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
2614                                 "you MUST configure one.\n");
2615                 }
2616         }
2617
2618         /* Wol magic packet can be enabled from eeprom */
2619         if((nic->mac >= mac_82558_D101_A4) &&
2620            (nic->eeprom[eeprom_id] & eeprom_id_wol))
2621                 nic->flags |= wol_magic;
2622
2623         /* ack any pending wake events, disable PME */
2624         err = pci_enable_wake(pdev, 0, 0);
2625         if (err)
2626                 DPRINTK(PROBE, ERR, "Error clearing wake event\n");
2627
2628         strcpy(netdev->name, "eth%d");
2629         if((err = register_netdev(netdev))) {
2630                 DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
2631                 goto err_out_free;
2632         }
2633
2634         DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, "
2635                 "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
2636                 (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq,
2637                 netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
2638                 netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
2639
2640         return 0;
2641
2642 err_out_free:
2643         e100_free(nic);
2644 err_out_iounmap:
2645         pci_iounmap(pdev, nic->csr);
2646 err_out_free_res:
2647         pci_release_regions(pdev);
2648 err_out_disable_pdev:
2649         pci_disable_device(pdev);
2650 err_out_free_dev:
2651         pci_set_drvdata(pdev, NULL);
2652         free_netdev(netdev);
2653         return err;
2654 }
2655
2656 static void __devexit e100_remove(struct pci_dev *pdev)
2657 {
2658         struct net_device *netdev = pci_get_drvdata(pdev);
2659
2660         if(netdev) {
2661                 struct nic *nic = netdev_priv(netdev);
2662                 unregister_netdev(netdev);
2663                 e100_free(nic);
2664                 iounmap(nic->csr);
2665                 free_netdev(netdev);
2666                 pci_release_regions(pdev);
2667                 pci_disable_device(pdev);
2668                 pci_set_drvdata(pdev, NULL);
2669         }
2670 }
2671
2672 #ifdef CONFIG_PM
2673 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
2674 {
2675         struct net_device *netdev = pci_get_drvdata(pdev);
2676         struct nic *nic = netdev_priv(netdev);
2677
2678         if (netif_running(netdev))
2679                 netif_poll_disable(nic->netdev);
2680         del_timer_sync(&nic->watchdog);
2681         netif_carrier_off(nic->netdev);
2682         netif_device_detach(netdev);
2683
2684         pci_save_state(pdev);
2685
2686         if ((nic->flags & wol_magic) | e100_asf(nic)) {
2687                 pci_enable_wake(pdev, PCI_D3hot, 1);
2688                 pci_enable_wake(pdev, PCI_D3cold, 1);
2689         } else {
2690                 pci_enable_wake(pdev, PCI_D3hot, 0);
2691                 pci_enable_wake(pdev, PCI_D3cold, 0);
2692         }
2693
2694         pci_disable_device(pdev);
2695         free_irq(pdev->irq, netdev);
2696         pci_set_power_state(pdev, PCI_D3hot);
2697
2698         return 0;
2699 }
2700
2701 static int e100_resume(struct pci_dev *pdev)
2702 {
2703         struct net_device *netdev = pci_get_drvdata(pdev);
2704         struct nic *nic = netdev_priv(netdev);
2705
2706         pci_set_power_state(pdev, PCI_D0);
2707         pci_restore_state(pdev);
2708         /* ack any pending wake events, disable PME */
2709         pci_enable_wake(pdev, 0, 0);
2710
2711         netif_device_attach(netdev);
2712         if (netif_running(netdev))
2713                 e100_up(nic);
2714
2715         return 0;
2716 }
2717 #endif /* CONFIG_PM */
2718
2719 static void e100_shutdown(struct pci_dev *pdev)
2720 {
2721         struct net_device *netdev = pci_get_drvdata(pdev);
2722         struct nic *nic = netdev_priv(netdev);
2723
2724         if (netif_running(netdev))
2725                 netif_poll_disable(nic->netdev);
2726         del_timer_sync(&nic->watchdog);
2727         netif_carrier_off(nic->netdev);
2728
2729         if ((nic->flags & wol_magic) | e100_asf(nic)) {
2730                 pci_enable_wake(pdev, PCI_D3hot, 1);
2731                 pci_enable_wake(pdev, PCI_D3cold, 1);
2732         } else {
2733                 pci_enable_wake(pdev, PCI_D3hot, 0);
2734                 pci_enable_wake(pdev, PCI_D3cold, 0);
2735         }
2736
2737         pci_disable_device(pdev);
2738         pci_set_power_state(pdev, PCI_D3hot);
2739 }
2740
2741 /* ------------------ PCI Error Recovery infrastructure  -------------- */
2742 /**
2743  * e100_io_error_detected - called when PCI error is detected.
2744  * @pdev: Pointer to PCI device
2745  * @state: The current pci conneection state
2746  */
2747 static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
2748 {
2749         struct net_device *netdev = pci_get_drvdata(pdev);
2750
2751         /* Similar to calling e100_down(), but avoids adpater I/O. */
2752         netdev->stop(netdev);
2753
2754         /* Detach; put netif into state similar to hotplug unplug. */
2755         netif_poll_enable(netdev);
2756         netif_device_detach(netdev);
2757         pci_disable_device(pdev);
2758
2759         /* Request a slot reset. */
2760         return PCI_ERS_RESULT_NEED_RESET;
2761 }
2762
2763 /**
2764  * e100_io_slot_reset - called after the pci bus has been reset.
2765  * @pdev: Pointer to PCI device
2766  *
2767  * Restart the card from scratch.
2768  */
2769 static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
2770 {
2771         struct net_device *netdev = pci_get_drvdata(pdev);
2772         struct nic *nic = netdev_priv(netdev);
2773
2774         if (pci_enable_device(pdev)) {
2775                 printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
2776                 return PCI_ERS_RESULT_DISCONNECT;
2777         }
2778         pci_set_master(pdev);
2779
2780         /* Only one device per card can do a reset */
2781         if (0 != PCI_FUNC(pdev->devfn))
2782                 return PCI_ERS_RESULT_RECOVERED;
2783         e100_hw_reset(nic);
2784         e100_phy_init(nic);
2785
2786         return PCI_ERS_RESULT_RECOVERED;
2787 }
2788
2789 /**
2790  * e100_io_resume - resume normal operations
2791  * @pdev: Pointer to PCI device
2792  *
2793  * Resume normal operations after an error recovery
2794  * sequence has been completed.
2795  */
2796 static void e100_io_resume(struct pci_dev *pdev)
2797 {
2798         struct net_device *netdev = pci_get_drvdata(pdev);
2799         struct nic *nic = netdev_priv(netdev);
2800
2801         /* ack any pending wake events, disable PME */
2802         pci_enable_wake(pdev, 0, 0);
2803
2804         netif_device_attach(netdev);
2805         if (netif_running(netdev)) {
2806                 e100_open(netdev);
2807                 mod_timer(&nic->watchdog, jiffies);
2808         }
2809 }
2810
2811 static struct pci_error_handlers e100_err_handler = {
2812         .error_detected = e100_io_error_detected,
2813         .slot_reset = e100_io_slot_reset,
2814         .resume = e100_io_resume,
2815 };
2816
2817 static struct pci_driver e100_driver = {
2818         .name =         DRV_NAME,
2819         .id_table =     e100_id_table,
2820         .probe =        e100_probe,
2821         .remove =       __devexit_p(e100_remove),
2822 #ifdef CONFIG_PM
2823         /* Power Management hooks */
2824         .suspend =      e100_suspend,
2825         .resume =       e100_resume,
2826 #endif
2827         .shutdown =     e100_shutdown,
2828         .err_handler = &e100_err_handler,
2829 };
2830
2831 static int __init e100_init_module(void)
2832 {
2833         if(((1 << debug) - 1) & NETIF_MSG_DRV) {
2834                 printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
2835                 printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
2836         }
2837         return pci_register_driver(&e100_driver);
2838 }
2839
2840 static void __exit e100_cleanup_module(void)
2841 {
2842         pci_unregister_driver(&e100_driver);
2843 }
2844
2845 module_init(e100_init_module);
2846 module_exit(e100_cleanup_module);