2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
35 This driver supports the ASIC3 multifunction chip found on many
36 PDAs (mainly iPAQ and HTC based ones)
38 config MFD_SH_MOBILE_SDHI
39 bool "Support for SuperH Mobile SDHI"
43 This driver supports the SDHI hardware block found in many
46 config MFD_DM355EVM_MSP
47 bool "DaVinci DM355 EVM microcontroller"
48 depends on I2C && MACH_DAVINCI_DM355_EVM
50 This driver supports the MSP430 microcontroller used on these
51 boards. MSP430 firmware manages resets and power sequencing,
52 inputs from buttons and the IR remote, LEDs, an RTC, and more.
55 bool "HTC EGPIO support"
56 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
58 This driver supports the CPLD egpio chip present on
59 several HTC phones. It provides basic support for input
60 pins, output pins, and irqs.
63 tristate "HTC PASIC3 LED/DS1WM chip support"
66 This core driver provides register access for the LED/DS1WM
67 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
68 HTC Magician devices, respectively. Actual functionality is
69 handled by the leds-pasic3 and ds1wm drivers.
72 tristate "Philips UCB1400 Core driver"
76 This enables support for the Philips UCB1400 core functions.
77 The UCB1400 is an AC97 audio codec.
79 To compile this driver as a module, choose M here: the
80 module will be called ucb1400_core.
83 tristate "TPS6501x Power Management chips"
84 depends on I2C && GPIOLIB
85 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
87 If you say yes here you get support for the TPS6501x series of
88 Power Management chips. These include voltage regulators,
89 lithium ion/polymer battery charging, and other features that
90 are often used in portable devices like cell phones and cameras.
92 This driver can also be built as a module. If so, the module
93 will be called tps65010.
96 bool "Texas Instruments TWL92330/Menelaus PM chip"
97 depends on I2C=y && ARCH_OMAP24XX
99 If you say yes here you get support for the Texas Instruments
100 TWL92330/Menelaus Power Management chip. This include voltage
101 regulators, Dual slot memory card transceivers, real-time clock
102 and other features that are often used in portable devices like
103 cell phones and PDAs.
106 bool "Texas Instruments TWL4030/TPS659x0 Support"
107 depends on I2C=y && GENERIC_HARDIRQS
109 Say yes here if you have TWL4030 family chip on your board.
110 This core driver provides register access and IRQ handling
111 facilities, and registers devices for the various functions
112 so that function-specific drivers can bind to them.
114 These multi-function chips are found on many OMAP2 and OMAP3
115 boards, providing power management, RTC, GPIO, keypad, a
116 high speed USB OTG transceiver, an audio codec (on most
117 versions) and many other features.
120 bool "Support power resources on TWL4030 family chips"
121 depends on TWL4030_CORE && ARM
123 Say yes here if you want to use the power resources on the
124 TWL4030 family chips. Most of these resources are regulators,
125 which have a separate driver; some are control signals, such
126 as clock request handshaking.
128 This driver uses board-specific data to initialize the resources
129 and load scripts controling which resources are switched off/on
130 or reset when a sleep, wakeup or warm reset event occurs.
137 bool "Support Toshiba T7L66XB"
138 depends on ARM && HAVE_CLK
142 Support for Toshiba Mobile IO Controller T7L66XB
145 bool "Support Toshiba TC6387XB"
146 depends on ARM && HAVE_CLK
150 Support for Toshiba Mobile IO Controller TC6387XB
153 bool "Support Toshiba TC6393XB"
154 depends on GPIOLIB && ARM
158 Support for Toshiba Mobile IO Controller TC6393XB
161 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
164 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
165 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
166 usually found on PXA processors-based platforms. This includes
167 the I2C driver and the core APIs _only_, you have to select
168 individual components like LCD backlight, voltage regulators,
169 LEDs and battery-charger under the corresponding menus.
172 tristate "Support Wolfson Microelectronics WM8400"
176 Support for the Wolfson Microelecronics WM8400 PMIC and audio
177 CODEC. This driver provides common support for accessing
178 the device, additional drivers must be enabled in order to use
179 the functionality of the device.
182 tristate "Support Wolfson Microelectronics WM831x PMICs"
186 Support for the Wolfson Microelecronics WM831x PMICs. This
187 driver provides common support for accessing the device,
188 additional drivers must be enabled in order to use the
189 functionality of the device.
194 config MFD_WM8350_CONFIG_MODE_0
196 depends on MFD_WM8350
198 config MFD_WM8350_CONFIG_MODE_1
200 depends on MFD_WM8350
202 config MFD_WM8350_CONFIG_MODE_2
204 depends on MFD_WM8350
206 config MFD_WM8350_CONFIG_MODE_3
208 depends on MFD_WM8350
210 config MFD_WM8351_CONFIG_MODE_0
212 depends on MFD_WM8350
214 config MFD_WM8351_CONFIG_MODE_1
216 depends on MFD_WM8350
218 config MFD_WM8351_CONFIG_MODE_2
220 depends on MFD_WM8350
222 config MFD_WM8351_CONFIG_MODE_3
224 depends on MFD_WM8350
226 config MFD_WM8352_CONFIG_MODE_0
228 depends on MFD_WM8350
230 config MFD_WM8352_CONFIG_MODE_1
232 depends on MFD_WM8350
234 config MFD_WM8352_CONFIG_MODE_2
236 depends on MFD_WM8350
238 config MFD_WM8352_CONFIG_MODE_3
240 depends on MFD_WM8350
242 config MFD_WM8350_I2C
243 tristate "Support Wolfson Microelectronics WM8350 with I2C"
247 The WM8350 is an integrated audio and power management
248 subsystem with watchdog and RTC functionality for embedded
249 systems. This option enables core support for the WM8350 with
250 I2C as the control interface. Additional options must be
251 selected to enable support for the functionality of the chip.
254 tristate "Support for NXP PCF50633"
257 Say yes here if you have NXP PCF50633 chip on your board.
258 This core driver provides register access and IRQ handling
259 facilities, and registers devices for the various functions
260 so that function-specific drivers can bind to them.
263 tristate "Support Freescale MC13783"
264 depends on SPI_MASTER
267 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
268 This driver provides common support for accessing the device,
269 additional drivers must be enabled in order to use the
270 functionality of the device.
273 tristate "Support for NXP PCF50633 ADC"
274 depends on MFD_PCF50633
276 Say yes here if you want to include support for ADC in the
280 tristate "Support for NXP PCF50633 GPIO"
281 depends on MFD_PCF50633
283 Say yes here if you want to include support GPIO for pins on
287 tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
289 default y if ARCH_U300
291 Select this to enable the AB3100 Mixed Signal IC core
292 functionality. This connects to a AB3100 on the I2C bus
293 and expose a number of symbols needed for dependent devices
294 to read and write registers and subscribe to events from
295 this multi-functional IC. This is needed to use other features
296 of the AB3100 such as battery-backed RTC, charging control,
297 LEDs, vibrator, system power and temperature, power management
301 tristate "ST-Ericsson AB3100 OTP functions"
302 depends on AB3100_CORE
303 default y if AB3100_CORE
305 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
306 programmable memory) support. This exposes a sysfs file to read
311 depends on GENERIC_HARDIRQS && SPI_MASTER
313 This enables the PCAP ASIC present on EZX Phones. This is
314 needed for MMC, TouchScreen, Sound, USB, etc..
318 menu "Multimedia Capabilities Port drivers"
319 depends on ARCH_SA1100
326 tristate "Support SA11x0 MCP interface"
327 depends on ARCH_SA1100
332 tristate "Support for UCB1200 / UCB1300"
335 config MCP_UCB1200_TS
336 tristate "Touchscreen interface support"
337 depends on MCP_UCB1200 && INPUT