SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/media/video/pvrusb2/pvrusb2-devattr.c

   1 /*
   2  *
   3  *
   4  *  Copyright (C) 2007 Mike Isely <isely@pobox.com>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  *
  19  */
  20
  21 /*
  22
  23 This source file should encompass ALL per-device type information for the
  24 driver.  To define a new device, add elements to the pvr2_device_table and
  25 pvr2_device_desc structures.
  26
  27 */
  28
  29 #include "pvrusb2-devattr.h"
  30 #include <linux/usb.h>
  31 /* This is needed in order to pull in tuner type ids... */
  32 #include <linux/i2c.h>
  33 #include <media/tuner.h>
  34 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
  35 #include "pvrusb2-hdw-internal.h"
  36 #include "lgdt330x.h"
  37 #include "s5h1409.h"
  38 #include "s5h1411.h"
  39 #include "tda10048.h"
  40 #include "tda18271.h"
  41 #include "tda8290.h"
  42 #include "tuner-simple.h"
  43 #endif
  44
  45
  46 /*------------------------------------------------------------------------*/
  47 /* Hauppauge PVR-USB2 Model 29xxx */
  48
  49 static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = {
  50         { .module_id = PVR2_CLIENT_ID_SAA7115 },
  51         { .module_id = PVR2_CLIENT_ID_MSP3400 },
  52         { .module_id = PVR2_CLIENT_ID_TUNER },
  53         { .module_id = PVR2_CLIENT_ID_DEMOD },
  54 };
  55
  56 static const char *pvr2_fw1_names_29xxx[] = {
  57                 "v4l-pvrusb2-29xxx-01.fw",
  58 };
  59
  60 static const struct pvr2_device_desc pvr2_device_29xxx = {
  61                 .description = "WinTV PVR USB2 Model Category 29xxx",
  62                 .shortname = "29xxx",
  63                 .client_table.lst = pvr2_cli_29xxx,
  64                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx),
  65                 .fx2_firmware.lst = pvr2_fw1_names_29xxx,
  66                 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx),
  67                 .flag_has_hauppauge_rom = !0,
  68                 .flag_has_analogtuner = !0,
  69                 .flag_has_fmradio = !0,
  70                 .flag_has_composite = !0,
  71                 .flag_has_svideo = !0,
  72                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
  73                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
  74                 .ir_scheme = PVR2_IR_SCHEME_29XXX,
  75 };
  76
  77
  78
  79 /*------------------------------------------------------------------------*/
  80 /* Hauppauge PVR-USB2 Model 24xxx */
  81
  82 static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = {
  83         { .module_id = PVR2_CLIENT_ID_CX25840 },
  84         { .module_id = PVR2_CLIENT_ID_TUNER },
  85         { .module_id = PVR2_CLIENT_ID_WM8775 },
  86         { .module_id = PVR2_CLIENT_ID_DEMOD },
  87 };
  88
  89 static const char *pvr2_fw1_names_24xxx[] = {
  90                 "v4l-pvrusb2-24xxx-01.fw",
  91 };
  92
  93 static const struct pvr2_device_desc pvr2_device_24xxx = {
  94                 .description = "WinTV PVR USB2 Model Category 24xxx",
  95                 .shortname = "24xxx",
  96                 .client_table.lst = pvr2_cli_24xxx,
  97                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx),
  98                 .fx2_firmware.lst = pvr2_fw1_names_24xxx,
  99                 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx),
 100                 .flag_has_cx25840 = !0,
 101                 .flag_has_wm8775 = !0,
 102                 .flag_has_hauppauge_rom = !0,
 103                 .flag_has_analogtuner = !0,
 104                 .flag_has_fmradio = !0,
 105                 .flag_has_composite = !0,
 106                 .flag_has_svideo = !0,
 107                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 108                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
 109                 .ir_scheme = PVR2_IR_SCHEME_24XXX,
 110 };
 111
 112
 113
 114 /*------------------------------------------------------------------------*/
 115 /* GOTVIEW USB2.0 DVD2 */
 116
 117 static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
 118         { .module_id = PVR2_CLIENT_ID_CX25840 },
 119         { .module_id = PVR2_CLIENT_ID_TUNER },
 120 };
 121
 122 static const struct pvr2_device_desc pvr2_device_gotview_2 = {
 123                 .description = "Gotview USB 2.0 DVD 2",
 124                 .shortname = "gv2",
 125                 .client_table.lst = pvr2_cli_gotview_2,
 126                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
 127                 .flag_has_cx25840 = !0,
 128                 .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
 129                 .flag_has_analogtuner = !0,
 130                 .flag_has_fmradio = !0,
 131                 .flag_has_composite = !0,
 132                 .flag_has_svideo = !0,
 133                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
 134 };
 135
 136
 137
 138 /*------------------------------------------------------------------------*/
 139 /* GOTVIEW USB2.0 DVD Deluxe */
 140
 141 /* (same module list as gotview_2) */
 142
 143 static const struct pvr2_device_desc pvr2_device_gotview_2d = {
 144                 .description = "Gotview USB 2.0 DVD Deluxe",
 145                 .shortname = "gv2d",
 146                 .client_table.lst = pvr2_cli_gotview_2,
 147                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
 148                 .flag_has_cx25840 = !0,
 149                 .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
 150                 .flag_has_analogtuner = !0,
 151                 .flag_has_composite = !0,
 152                 .flag_has_svideo = !0,
 153                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
 154 };
 155
 156
 157
 158 /*------------------------------------------------------------------------*/
 159 /* OnAir Creator */
 160
 161 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 162 static struct lgdt330x_config pvr2_lgdt3303_config = {
 163         .demod_address       = 0x0e,
 164         .demod_chip          = LGDT3303,
 165         .clock_polarity_flip = 1,
 166 };
 167
 168 static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap)
 169 {
 170         adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config,
 171                               &adap->channel.hdw->i2c_adap);
 172         if (adap->fe)
 173                 return 0;
 174
 175         return -EIO;
 176 }
 177
 178 static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap)
 179 {
 180         dvb_attach(simple_tuner_attach, adap->fe,
 181                    &adap->channel.hdw->i2c_adap, 0x61,
 182                    TUNER_LG_TDVS_H06XF);
 183
 184         return 0;
 185 }
 186
 187 static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = {
 188         .frontend_attach = pvr2_lgdt3303_attach,
 189         .tuner_attach    = pvr2_lgh06xf_attach,
 190 };
 191 #endif
 192
 193 static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = {
 194         { .module_id = PVR2_CLIENT_ID_SAA7115 },
 195         { .module_id = PVR2_CLIENT_ID_CS53L32A },
 196         { .module_id = PVR2_CLIENT_ID_TUNER },
 197 };
 198
 199 static const struct pvr2_device_desc pvr2_device_onair_creator = {
 200                 .description = "OnAir Creator Hybrid USB tuner",
 201                 .shortname = "oac",
 202                 .client_table.lst = pvr2_cli_onair_creator,
 203                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator),
 204                 .default_tuner_type = TUNER_LG_TDVS_H06XF,
 205                 .flag_has_analogtuner = !0,
 206                 .flag_has_composite = !0,
 207                 .flag_has_svideo = !0,
 208                 .flag_digital_requires_cx23416 = !0,
 209                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
 210                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
 211                 .default_std_mask = V4L2_STD_NTSC_M,
 212 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 213                 .dvb_props = &pvr2_onair_creator_fe_props,
 214 #endif
 215 };
 216
 217
 218
 219 /*------------------------------------------------------------------------*/
 220 /* OnAir USB 2.0 */
 221
 222 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 223 static struct lgdt330x_config pvr2_lgdt3302_config = {
 224         .demod_address       = 0x0e,
 225         .demod_chip          = LGDT3302,
 226 };
 227
 228 static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap)
 229 {
 230         adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config,
 231                               &adap->channel.hdw->i2c_adap);
 232         if (adap->fe)
 233                 return 0;
 234
 235         return -EIO;
 236 }
 237
 238 static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap)
 239 {
 240         dvb_attach(simple_tuner_attach, adap->fe,
 241                    &adap->channel.hdw->i2c_adap, 0x61,
 242                    TUNER_PHILIPS_FCV1236D);
 243
 244         return 0;
 245 }
 246
 247 static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = {
 248         .frontend_attach = pvr2_lgdt3302_attach,
 249         .tuner_attach    = pvr2_fcv1236d_attach,
 250 };
 251 #endif
 252
 253 static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = {
 254         { .module_id = PVR2_CLIENT_ID_SAA7115 },
 255         { .module_id = PVR2_CLIENT_ID_CS53L32A },
 256         { .module_id = PVR2_CLIENT_ID_TUNER },
 257 };
 258
 259 static const struct pvr2_device_desc pvr2_device_onair_usb2 = {
 260                 .description = "OnAir USB2 Hybrid USB tuner",
 261                 .shortname = "oa2",
 262                 .client_table.lst = pvr2_cli_onair_usb2,
 263                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2),
 264                 .default_tuner_type = TUNER_PHILIPS_FCV1236D,
 265                 .flag_has_analogtuner = !0,
 266                 .flag_has_composite = !0,
 267                 .flag_has_svideo = !0,
 268                 .flag_digital_requires_cx23416 = !0,
 269                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
 270                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
 271                 .default_std_mask = V4L2_STD_NTSC_M,
 272 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 273                 .dvb_props = &pvr2_onair_usb2_fe_props,
 274 #endif
 275 };
 276
 277
 278
 279 /*------------------------------------------------------------------------*/
 280 /* Hauppauge PVR-USB2 Model 73xxx */
 281
 282 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 283 static struct tda10048_config hauppauge_tda10048_config = {
 284         .demod_address  = 0x10 >> 1,
 285         .output_mode    = TDA10048_PARALLEL_OUTPUT,
 286         .fwbulkwritelen = TDA10048_BULKWRITE_50,
 287         .inversion      = TDA10048_INVERSION_ON,
 288         .dtv6_if_freq_khz = TDA10048_IF_3300,
 289         .dtv7_if_freq_khz = TDA10048_IF_3800,
 290         .dtv8_if_freq_khz = TDA10048_IF_4300,
 291         .clk_freq_khz   = TDA10048_CLK_16000,
 292         .disable_gate_access = 1,
 293 };
 294
 295 static struct tda829x_config tda829x_no_probe = {
 296         .probe_tuner = TDA829X_DONT_PROBE,
 297 };
 298
 299 static struct tda18271_config hauppauge_tda18271_dvb_config = {
 300         .gate    = TDA18271_GATE_ANALOG,
 301 };
 302
 303 static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap)
 304 {
 305         adap->fe = dvb_attach(tda10048_attach, &hauppauge_tda10048_config,
 306                               &adap->channel.hdw->i2c_adap);
 307         if (adap->fe)
 308                 return 0;
 309
 310         return -EIO;
 311 }
 312
 313 static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
 314 {
 315         dvb_attach(tda829x_attach, adap->fe,
 316                    &adap->channel.hdw->i2c_adap, 0x42,
 317                    &tda829x_no_probe);
 318         dvb_attach(tda18271_attach, adap->fe, 0x60,
 319                    &adap->channel.hdw->i2c_adap,
 320                    &hauppauge_tda18271_dvb_config);
 321
 322         return 0;
 323 }
 324
 325 static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = {
 326         .frontend_attach = pvr2_tda10048_attach,
 327         .tuner_attach    = pvr2_73xxx_tda18271_8295_attach,
 328 };
 329 #endif
 330
 331 static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = {
 332         { .module_id = PVR2_CLIENT_ID_CX25840 },
 333         { .module_id = PVR2_CLIENT_ID_TUNER,
 334           .i2c_address_list = "\x42"},
 335 };
 336
 337 static const char *pvr2_fw1_names_73xxx[] = {
 338                 "v4l-pvrusb2-73xxx-01.fw",
 339 };
 340
 341 static const struct pvr2_device_desc pvr2_device_73xxx = {
 342                 .description = "WinTV HVR-1900 Model Category 73xxx",
 343                 .shortname = "73xxx",
 344                 .client_table.lst = pvr2_cli_73xxx,
 345                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
 346                 .fx2_firmware.lst = pvr2_fw1_names_73xxx,
 347                 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
 348                 .flag_has_cx25840 = !0,
 349                 .flag_has_hauppauge_rom = !0,
 350                 .flag_has_analogtuner = !0,
 351                 .flag_has_composite = !0,
 352                 .flag_has_svideo = !0,
 353                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 354                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 355                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
 356                 .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 357 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 358                 .dvb_props = &pvr2_73xxx_dvb_props,
 359 #endif
 360 };
 361
 362
 363
 364 /*------------------------------------------------------------------------*/
 365 /* Hauppauge PVR-USB2 Model 75xxx */
 366
 367 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 368 static struct s5h1409_config pvr2_s5h1409_config = {
 369         .demod_address = 0x32 >> 1,
 370         .output_mode   = S5H1409_PARALLEL_OUTPUT,
 371         .gpio          = S5H1409_GPIO_OFF,
 372         .qam_if        = 4000,
 373         .inversion     = S5H1409_INVERSION_ON,
 374         .status_mode   = S5H1409_DEMODLOCKING,
 375 };
 376
 377 static struct s5h1411_config pvr2_s5h1411_config = {
 378         .output_mode   = S5H1411_PARALLEL_OUTPUT,
 379         .gpio          = S5H1411_GPIO_OFF,
 380         .vsb_if        = S5H1411_IF_44000,
 381         .qam_if        = S5H1411_IF_4000,
 382         .inversion     = S5H1411_INVERSION_ON,
 383         .status_mode   = S5H1411_DEMODLOCKING,
 384 };
 385
 386 static struct tda18271_std_map hauppauge_tda18271_std_map = {
 387         .atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
 388                       .if_lvl = 6, .rfagc_top = 0x37, },
 389         .qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
 390                       .if_lvl = 6, .rfagc_top = 0x37, },
 391 };
 392
 393 static struct tda18271_config hauppauge_tda18271_config = {
 394         .std_map = &hauppauge_tda18271_std_map,
 395         .gate    = TDA18271_GATE_ANALOG,
 396 };
 397
 398 static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap)
 399 {
 400         adap->fe = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config,
 401                               &adap->channel.hdw->i2c_adap);
 402         if (adap->fe)
 403                 return 0;
 404
 405         return -EIO;
 406 }
 407
 408 static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap)
 409 {
 410         adap->fe = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config,
 411                               &adap->channel.hdw->i2c_adap);
 412         if (adap->fe)
 413                 return 0;
 414
 415         return -EIO;
 416 }
 417
 418 static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
 419 {
 420         dvb_attach(tda829x_attach, adap->fe,
 421                    &adap->channel.hdw->i2c_adap, 0x42,
 422                    &tda829x_no_probe);
 423         dvb_attach(tda18271_attach, adap->fe, 0x60,
 424                    &adap->channel.hdw->i2c_adap,
 425                    &hauppauge_tda18271_config);
 426
 427         return 0;
 428 }
 429
 430 static const struct pvr2_dvb_props pvr2_750xx_dvb_props = {
 431         .frontend_attach = pvr2_s5h1409_attach,
 432         .tuner_attach    = pvr2_tda18271_8295_attach,
 433 };
 434
 435 static const struct pvr2_dvb_props pvr2_751xx_dvb_props = {
 436         .frontend_attach = pvr2_s5h1411_attach,
 437         .tuner_attach    = pvr2_tda18271_8295_attach,
 438 };
 439 #endif
 440
 441 static const char *pvr2_fw1_names_75xxx[] = {
 442                 "v4l-pvrusb2-73xxx-01.fw",
 443 };
 444
 445 static const struct pvr2_device_desc pvr2_device_750xx = {
 446                 .description = "WinTV HVR-1950 Model Category 750xx",
 447                 .shortname = "750xx",
 448                 .client_table.lst = pvr2_cli_73xxx,
 449                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
 450                 .fx2_firmware.lst = pvr2_fw1_names_75xxx,
 451                 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
 452                 .flag_has_cx25840 = !0,
 453                 .flag_has_hauppauge_rom = !0,
 454                 .flag_has_analogtuner = !0,
 455                 .flag_has_composite = !0,
 456                 .flag_has_svideo = !0,
 457                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 458                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 459                 .default_std_mask = V4L2_STD_NTSC_M,
 460                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
 461                 .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 462 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 463                 .dvb_props = &pvr2_750xx_dvb_props,
 464 #endif
 465 };
 466
 467 static const struct pvr2_device_desc pvr2_device_751xx = {
 468                 .description = "WinTV HVR-1950 Model Category 751xx",
 469                 .shortname = "751xx",
 470                 .client_table.lst = pvr2_cli_73xxx,
 471                 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
 472                 .fx2_firmware.lst = pvr2_fw1_names_75xxx,
 473                 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
 474                 .flag_has_cx25840 = !0,
 475                 .flag_has_hauppauge_rom = !0,
 476                 .flag_has_analogtuner = !0,
 477                 .flag_has_composite = !0,
 478                 .flag_has_svideo = !0,
 479                 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 480                 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
 481                 .default_std_mask = V4L2_STD_NTSC_M,
 482                 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
 483                 .ir_scheme = PVR2_IR_SCHEME_ZILOG,
 484 #ifdef CONFIG_VIDEO_PVRUSB2_DVB
 485                 .dvb_props = &pvr2_751xx_dvb_props,
 486 #endif
 487 };
 488
 489
 490
 491 /*------------------------------------------------------------------------*/
 492
 493 struct usb_device_id pvr2_device_table[] = {
 494         { USB_DEVICE(0x2040, 0x2900),
 495           .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
 496         { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
 497           .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
 498         { USB_DEVICE(0x2040, 0x2400),
 499           .driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
 500         { USB_DEVICE(0x1164, 0x0622),
 501           .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2},
 502         { USB_DEVICE(0x1164, 0x0602),
 503           .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d},
 504         { USB_DEVICE(0x11ba, 0x1003),
 505           .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator},
 506         { USB_DEVICE(0x11ba, 0x1001),
 507           .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
 508         { USB_DEVICE(0x2040, 0x7300),
 509           .driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
 510         { USB_DEVICE(0x2040, 0x7500),
 511           .driver_info = (kernel_ulong_t)&pvr2_device_750xx},
 512         { USB_DEVICE(0x2040, 0x7501),
 513           .driver_info = (kernel_ulong_t)&pvr2_device_751xx},
 514         { }
 515 };
 516
 517 MODULE_DEVICE_TABLE(usb, pvr2_device_table);
 518
 519
 520 /*
 521   Stuff for Emacs to see, in order to encourage consistent editing style:
 522   *** Local Variables: ***
 523   *** mode: c ***
 524   *** fill-column: 75 ***
 525   *** tab-width: 8 ***
 526   *** c-basic-offset: 8 ***
 527   *** End: ***
 528   */