SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tveeprom.h>
  35 #include <media/v4l2-common.h>
  36 #include <media/v4l2-chip-ident.h>
  37
  38 #include "em28xx.h"
  39
  40 static int tuner = -1;
  41 module_param(tuner, int, 0444);
  42 MODULE_PARM_DESC(tuner, "tuner type");
  43
  44 static unsigned int disable_ir;
  45 module_param(disable_ir, int, 0444);
  46 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  47
  48 struct em28xx_hash_table {
  49         unsigned long hash;
  50         unsigned int  model;
  51         unsigned int  tuner;
  52 };
  53
  54 struct em28xx_board em28xx_boards[] = {
  55         [EM2750_BOARD_UNKNOWN] = {
  56                 .name          = "Unknown EM2750/EM2751 webcam grabber",
  57                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
  58                 .input         = { {
  59                         .type     = EM28XX_VMUX_COMPOSITE1,
  60                         .vmux     = 0,
  61                         .amux     = EM28XX_AMUX_VIDEO,
  62                 } },
  63         },
  64         [EM2800_BOARD_UNKNOWN] = {
  65                 .name         = "Unknown EM2800 video grabber",
  66                 .is_em2800    = 1,
  67                 .tda9887_conf = TDA9887_PRESENT,
  68                 .decoder      = EM28XX_SAA711X,
  69                 .input        = { {
  70                         .type     = EM28XX_VMUX_COMPOSITE1,
  71                         .vmux     = SAA7115_COMPOSITE0,
  72                         .amux     = EM28XX_AMUX_LINE_IN,
  73                 }, {
  74                         .type     = EM28XX_VMUX_SVIDEO,
  75                         .vmux     = SAA7115_SVIDEO3,
  76                         .amux     = EM28XX_AMUX_LINE_IN,
  77                 } },
  78         },
  79         [EM2820_BOARD_UNKNOWN] = {
  80                 .name          = "Unknown EM2750/28xx video grabber",
  81                 .tuner_type    = TUNER_ABSENT,
  82         },
  83         [EM2750_BOARD_DLCW_130] = {
  84                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
  85                 .name          = "Huaqi DLCW-130",
  86                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
  87                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
  88                 .input         = { {
  89                         .type     = EM28XX_VMUX_COMPOSITE1,
  90                         .vmux     = 0,
  91                         .amux     = EM28XX_AMUX_VIDEO,
  92                 } },
  93         },
  94         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
  95                 .name         = "Kworld PVR TV 2800 RF",
  96                 .tuner_type   = TUNER_TEMIC_PAL,
  97                 .tda9887_conf = TDA9887_PRESENT,
  98                 .decoder      = EM28XX_SAA711X,
  99                 .input        = { {
 100                         .type     = EM28XX_VMUX_COMPOSITE1,
 101                         .vmux     = SAA7115_COMPOSITE0,
 102                         .amux     = EM28XX_AMUX_LINE_IN,
 103                 }, {
 104                         .type     = EM28XX_VMUX_SVIDEO,
 105                         .vmux     = SAA7115_SVIDEO3,
 106                         .amux     = EM28XX_AMUX_LINE_IN,
 107                 } },
 108         },
 109         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 110                 .name         = "Terratec Cinergy 250 USB",
 111                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 112                 .tda9887_conf = TDA9887_PRESENT,
 113                 .decoder      = EM28XX_SAA711X,
 114                 .input        = { {
 115                         .type     = EM28XX_VMUX_TELEVISION,
 116                         .vmux     = SAA7115_COMPOSITE2,
 117                         .amux     = EM28XX_AMUX_LINE_IN,
 118                 }, {
 119                         .type     = EM28XX_VMUX_COMPOSITE1,
 120                         .vmux     = SAA7115_COMPOSITE0,
 121                         .amux     = EM28XX_AMUX_LINE_IN,
 122                 }, {
 123                         .type     = EM28XX_VMUX_SVIDEO,
 124                         .vmux     = SAA7115_SVIDEO3,
 125                         .amux     = EM28XX_AMUX_LINE_IN,
 126                 } },
 127         },
 128         [EM2820_BOARD_PINNACLE_USB_2] = {
 129                 .name         = "Pinnacle PCTV USB 2",
 130                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 131                 .tda9887_conf = TDA9887_PRESENT,
 132                 .decoder      = EM28XX_SAA711X,
 133                 .input        = { {
 134                         .type     = EM28XX_VMUX_TELEVISION,
 135                         .vmux     = SAA7115_COMPOSITE2,
 136                         .amux     = EM28XX_AMUX_VIDEO,
 137                 }, {
 138                         .type     = EM28XX_VMUX_COMPOSITE1,
 139                         .vmux     = SAA7115_COMPOSITE0,
 140                         .amux     = EM28XX_AMUX_LINE_IN,
 141                 }, {
 142                         .type     = EM28XX_VMUX_SVIDEO,
 143                         .vmux     = SAA7115_SVIDEO3,
 144                         .amux     = EM28XX_AMUX_LINE_IN,
 145                 } },
 146         },
 147         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 148                 .name         = "Hauppauge WinTV USB 2",
 149                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 150                 .tda9887_conf = TDA9887_PRESENT |
 151                                 TDA9887_PORT1_ACTIVE|
 152                                 TDA9887_PORT2_ACTIVE,
 153                 .decoder      = EM28XX_TVP5150,
 154                 .has_msp34xx  = 1,
 155                 .input        = { {
 156                         .type     = EM28XX_VMUX_TELEVISION,
 157                         .vmux     = TVP5150_COMPOSITE0,
 158                         .amux     = MSP_INPUT_DEFAULT,
 159                 }, {
 160                         .type     = EM28XX_VMUX_SVIDEO,
 161                         .vmux     = TVP5150_SVIDEO,
 162                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 163                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 164                 } },
 165         },
 166         [EM2820_BOARD_DLINK_USB_TV] = {
 167                 .name         = "D-Link DUB-T210 TV Tuner",
 168                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 169                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 170                 .tda9887_conf = TDA9887_PRESENT,
 171                 .decoder      = EM28XX_SAA711X,
 172                 .input        = { {
 173                         .type     = EM28XX_VMUX_TELEVISION,
 174                         .vmux     = SAA7115_COMPOSITE2,
 175                         .amux     = EM28XX_AMUX_LINE_IN,
 176                 }, {
 177                         .type     = EM28XX_VMUX_COMPOSITE1,
 178                         .vmux     = SAA7115_COMPOSITE0,
 179                         .amux     = EM28XX_AMUX_LINE_IN,
 180                 }, {
 181                         .type     = EM28XX_VMUX_SVIDEO,
 182                         .vmux     = SAA7115_SVIDEO3,
 183                         .amux     = EM28XX_AMUX_LINE_IN,
 184                 } },
 185         },
 186         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 187                 .name         = "Hercules Smart TV USB 2.0",
 188                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 189                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 190                 .tda9887_conf = TDA9887_PRESENT,
 191                 .decoder      = EM28XX_SAA711X,
 192                 .input        = { {
 193                         .type     = EM28XX_VMUX_TELEVISION,
 194                         .vmux     = SAA7115_COMPOSITE2,
 195                         .amux     = EM28XX_AMUX_LINE_IN,
 196                 }, {
 197                         .type     = EM28XX_VMUX_COMPOSITE1,
 198                         .vmux     = SAA7115_COMPOSITE0,
 199                         .amux     = EM28XX_AMUX_LINE_IN,
 200                 }, {
 201                         .type     = EM28XX_VMUX_SVIDEO,
 202                         .vmux     = SAA7115_SVIDEO3,
 203                         .amux     = EM28XX_AMUX_LINE_IN,
 204                 } },
 205         },
 206         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 207                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 208                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 209                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 210                 .tda9887_conf = TDA9887_PRESENT,
 211                 .decoder      = EM28XX_SAA711X,
 212                 .input        = { {
 213                         .type     = EM28XX_VMUX_TELEVISION,
 214                         .vmux     = SAA7115_COMPOSITE2,
 215                         .amux     = EM28XX_AMUX_VIDEO,
 216                 }, {
 217                         .type     = EM28XX_VMUX_COMPOSITE1,
 218                         .vmux     = SAA7115_COMPOSITE0,
 219                         .amux     = EM28XX_AMUX_LINE_IN,
 220                 }, {
 221                         .type     = EM28XX_VMUX_SVIDEO,
 222                         .vmux     = SAA7115_SVIDEO3,
 223                         .amux     = EM28XX_AMUX_LINE_IN,
 224                 } },
 225         },
 226         [EM2820_BOARD_GADMEI_UTV310] = {
 227                 .name         = "Gadmei UTV310",
 228                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 229                 .tuner_type   = TUNER_TNF_5335MF,
 230                 .tda9887_conf = TDA9887_PRESENT,
 231                 .decoder      = EM28XX_SAA711X,
 232                 .input        = { {
 233                         .type     = EM28XX_VMUX_TELEVISION,
 234                         .vmux     = SAA7115_COMPOSITE1,
 235                         .amux     = EM28XX_AMUX_LINE_IN,
 236                 }, {
 237                         .type     = EM28XX_VMUX_COMPOSITE1,
 238                         .vmux     = SAA7115_COMPOSITE0,
 239                         .amux     = EM28XX_AMUX_LINE_IN,
 240                 }, {
 241                         .type     = EM28XX_VMUX_SVIDEO,
 242                         .vmux     = SAA7115_SVIDEO3,
 243                         .amux     = EM28XX_AMUX_LINE_IN,
 244                 } },
 245         },
 246         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 247                 .name         = "Leadtek Winfast USB II Deluxe",
 248                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 249                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 250                 .tda9887_conf = TDA9887_PRESENT,
 251                 .decoder      = EM28XX_SAA711X,
 252                 .input        = { {
 253                         .type     = EM28XX_VMUX_TELEVISION,
 254                         .vmux     = 2,
 255                         .amux     = EM28XX_AMUX_VIDEO,
 256                 }, {
 257                         .type     = EM28XX_VMUX_COMPOSITE1,
 258                         .vmux     = 0,
 259                         .amux     = EM28XX_AMUX_LINE_IN,
 260                 }, {
 261                         .type     = EM28XX_VMUX_SVIDEO,
 262                         .vmux     = 9,
 263                         .amux     = EM28XX_AMUX_LINE_IN,
 264                 } },
 265         },
 266         [EM2820_BOARD_PINNACLE_DVC_100] = {
 267                 .name         = "Pinnacle Dazzle DVC 100",
 268                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 269                 .decoder      = EM28XX_SAA711X,
 270                 .input        = { {
 271                         .type     = EM28XX_VMUX_COMPOSITE1,
 272                         .vmux     = SAA7115_COMPOSITE0,
 273                         .amux     = EM28XX_AMUX_LINE_IN,
 274                 }, {
 275                         .type     = EM28XX_VMUX_SVIDEO,
 276                         .vmux     = SAA7115_SVIDEO3,
 277                         .amux     = EM28XX_AMUX_LINE_IN,
 278                 } },
 279         },
 280         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 281                 .name         = "Videology 20K14XUSB USB2.0",
 282                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 283                 .input        = { {
 284                         .type     = EM28XX_VMUX_COMPOSITE1,
 285                         .vmux     = 0,
 286                         .amux     = EM28XX_AMUX_VIDEO,
 287                 } },
 288         },
 289         [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
 290                 .name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
 291                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 292                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,  /* unknown? */
 293                 .tda9887_conf = TDA9887_PRESENT,        /* unknown? */
 294                 .decoder      = EM28XX_SAA711X,
 295                 .input        = { {
 296                         .type     = EM28XX_VMUX_TELEVISION,
 297                         .vmux     = SAA7115_COMPOSITE2,
 298                         .amux     = EM28XX_AMUX_LINE_IN,
 299                 }, {
 300                         .type     = EM28XX_VMUX_COMPOSITE1,
 301                         .vmux     = SAA7115_COMPOSITE0,
 302                         .amux     = EM28XX_AMUX_LINE_IN,
 303                 }, {
 304                         .type     = EM28XX_VMUX_SVIDEO,
 305                         .vmux     = SAA7115_SVIDEO3,
 306                         .amux     = EM28XX_AMUX_LINE_IN,
 307                 } },
 308         },
 309         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 310                 .name         = "Supercomp USB 2.0 TV",
 311                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 312                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 313                 .tda9887_conf = TDA9887_PRESENT |
 314                                 TDA9887_PORT1_ACTIVE |
 315                                 TDA9887_PORT2_ACTIVE,
 316                 .decoder      = EM28XX_SAA711X,
 317                 .input        = { {
 318                         .type     = EM28XX_VMUX_TELEVISION,
 319                         .vmux     = SAA7115_COMPOSITE2,
 320                         .amux     = EM28XX_AMUX_LINE_IN,
 321                 }, {
 322                         .type     = EM28XX_VMUX_COMPOSITE1,
 323                         .vmux     = SAA7115_COMPOSITE0,
 324                         .amux     = EM28XX_AMUX_VIDEO,
 325                 }, {
 326                         .type     = EM28XX_VMUX_SVIDEO,
 327                         .vmux     = SAA7115_SVIDEO3,
 328                         .amux     = EM28XX_AMUX_LINE_IN,
 329                 } },
 330         },
 331         [EM2821_BOARD_USBGEAR_VD204] = {
 332                 .name         = "Usbgear VD204v9",
 333                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 334                 .decoder      = EM28XX_SAA711X,
 335                 .input        = { {
 336                         .type  = EM28XX_VMUX_COMPOSITE1,
 337                         .vmux  = SAA7115_COMPOSITE0,
 338                         .amux  = EM28XX_AMUX_LINE_IN,
 339                 }, {
 340                         .type  = EM28XX_VMUX_SVIDEO,
 341                         .vmux  = SAA7115_SVIDEO3,
 342                         .amux  = EM28XX_AMUX_LINE_IN,
 343                 } },
 344         },
 345         [EM2860_BOARD_NETGMBH_CAM] = {
 346                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 347                 .name         = "NetGMBH Cam",
 348                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 349                 .input        = { {
 350                         .type     = EM28XX_VMUX_COMPOSITE1,
 351                         .vmux     = 0,
 352                         .amux     = EM28XX_AMUX_VIDEO,
 353                 } },
 354         },
 355         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 356                 .name         = "Typhoon DVD Maker",
 357                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 358                 .decoder      = EM28XX_SAA711X,
 359                 .input        = { {
 360                         .type  = EM28XX_VMUX_COMPOSITE1,
 361                         .vmux  = SAA7115_COMPOSITE0,
 362                         .amux  = EM28XX_AMUX_LINE_IN,
 363                 }, {
 364                         .type  = EM28XX_VMUX_SVIDEO,
 365                         .vmux  = SAA7115_SVIDEO3,
 366                         .amux  = EM28XX_AMUX_LINE_IN,
 367                 } },
 368         },
 369         [EM2860_BOARD_GADMEI_UTV330] = {
 370                 .name         = "Gadmei UTV330",
 371                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 372                 .tuner_type   = TUNER_TNF_5335MF,
 373                 .tda9887_conf = TDA9887_PRESENT,
 374                 .decoder      = EM28XX_SAA711X,
 375                 .input        = { {
 376                         .type     = EM28XX_VMUX_TELEVISION,
 377                         .vmux     = SAA7115_COMPOSITE2,
 378                         .amux     = EM28XX_AMUX_VIDEO,
 379                 }, {
 380                         .type     = EM28XX_VMUX_COMPOSITE1,
 381                         .vmux     = SAA7115_COMPOSITE0,
 382                         .amux     = EM28XX_AMUX_LINE_IN,
 383                 }, {
 384                         .type     = EM28XX_VMUX_SVIDEO,
 385                         .vmux     = SAA7115_SVIDEO3,
 386                         .amux     = EM28XX_AMUX_LINE_IN,
 387                 } },
 388         },
 389         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 390                 .name         = "Terratec Cinergy A Hybrid XS",
 391                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 392                 .tuner_type   = TUNER_XC2028,
 393                 .decoder      = EM28XX_TVP5150,
 394                 .input        = { {
 395                         .type     = EM28XX_VMUX_TELEVISION,
 396                         .vmux     = TVP5150_COMPOSITE0,
 397                         .amux     = EM28XX_AMUX_VIDEO,
 398                 }, {
 399                         .type     = EM28XX_VMUX_COMPOSITE1,
 400                         .vmux     = TVP5150_COMPOSITE1,
 401                         .amux     = EM28XX_AMUX_LINE_IN,
 402                 }, {
 403                         .type     = EM28XX_VMUX_SVIDEO,
 404                         .vmux     = TVP5150_SVIDEO,
 405                         .amux     = EM28XX_AMUX_LINE_IN,
 406                 } },
 407         },
 408         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 409                 .name         = "KWorld PVRTV 300U",
 410                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 411                 .tuner_type   = TUNER_XC2028,
 412                 .decoder      = EM28XX_TVP5150,
 413                 .input        = { {
 414                         .type     = EM28XX_VMUX_TELEVISION,
 415                         .vmux     = TVP5150_COMPOSITE0,
 416                         .amux     = EM28XX_AMUX_VIDEO,
 417                 }, {
 418                         .type     = EM28XX_VMUX_COMPOSITE1,
 419                         .vmux     = TVP5150_COMPOSITE1,
 420                         .amux     = EM28XX_AMUX_LINE_IN,
 421                 }, {
 422                         .type     = EM28XX_VMUX_SVIDEO,
 423                         .vmux     = TVP5150_SVIDEO,
 424                         .amux     = EM28XX_AMUX_LINE_IN,
 425                 } },
 426         },
 427         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 428                 .name          = "Yakumo MovieMixer",
 429                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 430                 .decoder       = EM28XX_TVP5150,
 431                 .input         = { {
 432                         .type     = EM28XX_VMUX_TELEVISION,
 433                         .vmux     = TVP5150_COMPOSITE0,
 434                         .amux     = EM28XX_AMUX_VIDEO,
 435                 }, {
 436                         .type     = EM28XX_VMUX_COMPOSITE1,
 437                         .vmux     = TVP5150_COMPOSITE1,
 438                         .amux     = EM28XX_AMUX_LINE_IN,
 439                 }, {
 440                         .type     = EM28XX_VMUX_SVIDEO,
 441                         .vmux     = TVP5150_SVIDEO,
 442                         .amux     = EM28XX_AMUX_LINE_IN,
 443                 } },
 444         },
 445         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 446                 .name         = "Plextor ConvertX PX-TV100U",
 447                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 448                 .tuner_type   = TUNER_TNF_5335MF,
 449                 .tda9887_conf = TDA9887_PRESENT,
 450                 .decoder      = EM28XX_TVP5150,
 451                 .input        = { {
 452                         .type     = EM28XX_VMUX_TELEVISION,
 453                         .vmux     = TVP5150_COMPOSITE0,
 454                         .amux     = EM28XX_AMUX_LINE_IN,
 455                 }, {
 456                         .type     = EM28XX_VMUX_COMPOSITE1,
 457                         .vmux     = TVP5150_COMPOSITE1,
 458                         .amux     = EM28XX_AMUX_LINE_IN,
 459                 }, {
 460                         .type     = EM28XX_VMUX_SVIDEO,
 461                         .vmux     = TVP5150_SVIDEO,
 462                         .amux     = EM28XX_AMUX_LINE_IN,
 463                 } },
 464         },
 465         [EM2870_BOARD_TERRATEC_XS] = {
 466                 .name         = "Terratec Cinergy T XS",
 467                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 468                 .tuner_type   = TUNER_XC2028,
 469         },
 470         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 471                 .name         = "Terratec Cinergy T XS (MT2060)",
 472                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 473                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 474         },
 475         [EM2870_BOARD_KWORLD_350U] = {
 476                 .name         = "Kworld 350 U DVB-T",
 477                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 478                 .tuner_type   = TUNER_XC2028,
 479         },
 480         [EM2870_BOARD_KWORLD_355U] = {
 481                 .name         = "Kworld 355 U DVB-T",
 482                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 483         },
 484         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 485                 .name         = "Pinnacle PCTV DVB-T",
 486                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 487                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 488                 /* djh - I have serious doubts this is right... */
 489                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 490                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 491         },
 492         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 493                 .name         = "Compro, VideoMate U3",
 494                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 495                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 496         },
 497         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 498                 .name         = "Terratec Hybrid XS Secam",
 499                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 500                 .has_msp34xx  = 1,
 501                 .tuner_type   = TUNER_XC2028,
 502                 .decoder      = EM28XX_TVP5150,
 503                 .input        = { {
 504                         .type     = EM28XX_VMUX_TELEVISION,
 505                         .vmux     = TVP5150_COMPOSITE0,
 506                         .amux     = EM28XX_AMUX_VIDEO,
 507                 }, {
 508                         .type     = EM28XX_VMUX_COMPOSITE1,
 509                         .vmux     = TVP5150_COMPOSITE1,
 510                         .amux     = EM28XX_AMUX_LINE_IN,
 511                 }, {
 512                         .type     = EM28XX_VMUX_SVIDEO,
 513                         .vmux     = TVP5150_SVIDEO,
 514                         .amux     = EM28XX_AMUX_LINE_IN,
 515                 } },
 516         },
 517         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 518                 .name         = "Hauppauge WinTV HVR 900",
 519                 .tda9887_conf = TDA9887_PRESENT,
 520                 .tuner_type   = TUNER_XC2028,
 521                 .mts_firmware = 1,
 522                 .has_dvb      = 1,
 523                 .decoder      = EM28XX_TVP5150,
 524                 .input        = { {
 525                         .type     = EM28XX_VMUX_TELEVISION,
 526                         .vmux     = TVP5150_COMPOSITE0,
 527                         .amux     = EM28XX_AMUX_VIDEO,
 528                 }, {
 529                         .type     = EM28XX_VMUX_COMPOSITE1,
 530                         .vmux     = TVP5150_COMPOSITE1,
 531                         .amux     = EM28XX_AMUX_LINE_IN,
 532                 }, {
 533                         .type     = EM28XX_VMUX_SVIDEO,
 534                         .vmux     = TVP5150_SVIDEO,
 535                         .amux     = EM28XX_AMUX_LINE_IN,
 536                 } },
 537         },
 538         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 539                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 540                 .tda9887_conf = TDA9887_PRESENT,
 541                 .tuner_type   = TUNER_XC2028,
 542                 .mts_firmware = 1,
 543                 .decoder      = EM28XX_TVP5150,
 544                 .input        = { {
 545                         .type     = EM28XX_VMUX_TELEVISION,
 546                         .vmux     = TVP5150_COMPOSITE0,
 547                         .amux     = EM28XX_AMUX_VIDEO,
 548                 }, {
 549                         .type     = EM28XX_VMUX_COMPOSITE1,
 550                         .vmux     = TVP5150_COMPOSITE1,
 551                         .amux     = 3,
 552                 }, {
 553                         .type     = EM28XX_VMUX_SVIDEO,
 554                         .vmux     = TVP5150_SVIDEO,
 555                         .amux     = EM28XX_AMUX_LINE_IN,
 556                 } },
 557         },
 558         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 559                 .name           = "Hauppauge WinTV HVR 950",
 560                 .tuner_type     = TUNER_XC2028,
 561                 .mts_firmware   = 1,
 562                 .has_dvb        = 1,
 563                 .ir_codes       = ir_codes_hauppauge_new,
 564                 .decoder        = EM28XX_TVP5150,
 565                 .input          = { {
 566                         .type     = EM28XX_VMUX_TELEVISION,
 567                         .vmux     = TVP5150_COMPOSITE0,
 568                         .amux     = EM28XX_AMUX_VIDEO,
 569                 }, {
 570                         .type     = EM28XX_VMUX_COMPOSITE1,
 571                         .vmux     = TVP5150_COMPOSITE1,
 572                         .amux     = EM28XX_AMUX_LINE_IN,
 573                 }, {
 574                         .type     = EM28XX_VMUX_SVIDEO,
 575                         .vmux     = TVP5150_SVIDEO,
 576                         .amux     = EM28XX_AMUX_LINE_IN,
 577                 } },
 578         },
 579         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 580                 .name           = "Pinnacle PCTV HD Pro Stick",
 581                 .tuner_type     = TUNER_XC2028,
 582                 .mts_firmware   = 1,
 583                 .has_dvb        = 1,
 584                 .ir_codes       = ir_codes_pinnacle_pctv_hd,
 585                 .decoder        = EM28XX_TVP5150,
 586                 .input          = { {
 587                         .type     = EM28XX_VMUX_TELEVISION,
 588                         .vmux     = TVP5150_COMPOSITE0,
 589                         .amux     = EM28XX_AMUX_VIDEO,
 590                 }, {
 591                         .type     = EM28XX_VMUX_COMPOSITE1,
 592                         .vmux     = TVP5150_COMPOSITE1,
 593                         .amux     = EM28XX_AMUX_LINE_IN,
 594                 }, {
 595                         .type     = EM28XX_VMUX_SVIDEO,
 596                         .vmux     = TVP5150_SVIDEO,
 597                         .amux     = EM28XX_AMUX_LINE_IN,
 598                 } },
 599         },
 600         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 601                 .name           = "AMD ATI TV Wonder HD 600",
 602                 .tuner_type     = TUNER_XC2028,
 603                 .mts_firmware   = 1,
 604                 .has_dvb        = 1,
 605                 .ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 606                 .decoder        = EM28XX_TVP5150,
 607                 .input          = { {
 608                         .type     = EM28XX_VMUX_TELEVISION,
 609                         .vmux     = TVP5150_COMPOSITE0,
 610                         .amux     = EM28XX_AMUX_VIDEO,
 611                 }, {
 612                         .type     = EM28XX_VMUX_COMPOSITE1,
 613                         .vmux     = TVP5150_COMPOSITE1,
 614                         .amux     = EM28XX_AMUX_LINE_IN,
 615                 }, {
 616                         .type     = EM28XX_VMUX_SVIDEO,
 617                         .vmux     = TVP5150_SVIDEO,
 618                         .amux     = EM28XX_AMUX_LINE_IN,
 619                 } },
 620         },
 621         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 622                 .name           = "Terratec Hybrid XS",
 623                 .tuner_type     = TUNER_XC2028,
 624                 .decoder        = EM28XX_TVP5150,
 625                 .has_dvb        = 1,
 626                 .input          = { {
 627                         .type     = EM28XX_VMUX_TELEVISION,
 628                         .vmux     = TVP5150_COMPOSITE0,
 629                         .amux     = EM28XX_AMUX_VIDEO,
 630                 }, {
 631                         .type     = EM28XX_VMUX_COMPOSITE1,
 632                         .vmux     = TVP5150_COMPOSITE1,
 633                         .amux     = EM28XX_AMUX_LINE_IN,
 634                 }, {
 635                         .type     = EM28XX_VMUX_SVIDEO,
 636                         .vmux     = TVP5150_SVIDEO,
 637                         .amux     = EM28XX_AMUX_LINE_IN,
 638                 } },
 639         },
 640         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 641            as Prodigy XS with a different PID, let's keep it separated for now
 642            maybe we'll need it lateron */
 643         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 644                 .name         = "Terratec Prodigy XS",
 645                 .tuner_type   = TUNER_XC2028,
 646                 .decoder      = EM28XX_TVP5150,
 647                 .input        = { {
 648                         .type     = EM28XX_VMUX_TELEVISION,
 649                         .vmux     = TVP5150_COMPOSITE0,
 650                         .amux     = EM28XX_AMUX_VIDEO,
 651                 }, {
 652                         .type     = EM28XX_VMUX_COMPOSITE1,
 653                         .vmux     = TVP5150_COMPOSITE1,
 654                         .amux     = EM28XX_AMUX_LINE_IN,
 655                 }, {
 656                         .type     = EM28XX_VMUX_SVIDEO,
 657                         .vmux     = TVP5150_SVIDEO,
 658                         .amux     = EM28XX_AMUX_LINE_IN,
 659                 } },
 660         },
 661         [EM2820_BOARD_MSI_VOX_USB_2] = {
 662                 .name              = "MSI VOX USB 2.0",
 663                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 664                 .tda9887_conf      = TDA9887_PRESENT      |
 665                                      TDA9887_PORT1_ACTIVE |
 666                                      TDA9887_PORT2_ACTIVE,
 667                 .max_range_640_480 = 1,
 668                 .decoder           = EM28XX_SAA711X,
 669                 .input             = { {
 670                         .type      = EM28XX_VMUX_TELEVISION,
 671                         .vmux      = SAA7115_COMPOSITE4,
 672                         .amux      = EM28XX_AMUX_VIDEO,
 673                 }, {
 674                         .type      = EM28XX_VMUX_COMPOSITE1,
 675                         .vmux      = SAA7115_COMPOSITE0,
 676                         .amux      = EM28XX_AMUX_LINE_IN,
 677                 }, {
 678                         .type      = EM28XX_VMUX_SVIDEO,
 679                         .vmux      = SAA7115_SVIDEO3,
 680                         .amux      = EM28XX_AMUX_LINE_IN,
 681                 } },
 682         },
 683         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 684                 .name         = "Terratec Cinergy 200 USB",
 685                 .is_em2800    = 1,
 686                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 687                 .tda9887_conf = TDA9887_PRESENT,
 688                 .decoder      = EM28XX_SAA711X,
 689                 .input        = { {
 690                         .type     = EM28XX_VMUX_TELEVISION,
 691                         .vmux     = SAA7115_COMPOSITE2,
 692                         .amux     = EM28XX_AMUX_VIDEO,
 693                 }, {
 694                         .type     = EM28XX_VMUX_COMPOSITE1,
 695                         .vmux     = SAA7115_COMPOSITE0,
 696                         .amux     = EM28XX_AMUX_LINE_IN,
 697                 }, {
 698                         .type     = EM28XX_VMUX_SVIDEO,
 699                         .vmux     = SAA7115_SVIDEO3,
 700                         .amux     = EM28XX_AMUX_LINE_IN,
 701                 } },
 702         },
 703         [EM2800_BOARD_GRABBEEX_USB2800] = {
 704                 .name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 705                 .is_em2800    = 1,
 706                 .decoder      = EM28XX_SAA711X,
 707                 .input        = { {
 708                         .type     = EM28XX_VMUX_COMPOSITE1,
 709                         .vmux     = SAA7115_COMPOSITE0,
 710                         .amux     = EM28XX_AMUX_LINE_IN,
 711                 }, {
 712                         .type     = EM28XX_VMUX_SVIDEO,
 713                         .vmux     = SAA7115_SVIDEO3,
 714                         .amux     = EM28XX_AMUX_LINE_IN,
 715                 } },
 716         },
 717         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 718                 .name         = "Leadtek Winfast USB II",
 719                 .is_em2800    = 1,
 720                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 721                 .tda9887_conf = TDA9887_PRESENT,
 722                 .decoder      = EM28XX_SAA711X,
 723                 .input        = { {
 724                         .type     = EM28XX_VMUX_TELEVISION,
 725                         .vmux     = SAA7115_COMPOSITE2,
 726                         .amux     = EM28XX_AMUX_VIDEO,
 727                 }, {
 728                         .type     = EM28XX_VMUX_COMPOSITE1,
 729                         .vmux     = SAA7115_COMPOSITE0,
 730                         .amux     = EM28XX_AMUX_LINE_IN,
 731                 }, {
 732                         .type     = EM28XX_VMUX_SVIDEO,
 733                         .vmux     = SAA7115_SVIDEO3,
 734                         .amux     = EM28XX_AMUX_LINE_IN,
 735                 } },
 736         },
 737         [EM2800_BOARD_KWORLD_USB2800] = {
 738                 .name         = "Kworld USB2800",
 739                 .is_em2800    = 1,
 740                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 741                 .tda9887_conf = TDA9887_PRESENT,
 742                 .decoder      = EM28XX_SAA711X,
 743                 .input        = { {
 744                         .type     = EM28XX_VMUX_TELEVISION,
 745                         .vmux     = SAA7115_COMPOSITE2,
 746                         .amux     = EM28XX_AMUX_VIDEO,
 747                 }, {
 748                         .type     = EM28XX_VMUX_COMPOSITE1,
 749                         .vmux     = SAA7115_COMPOSITE0,
 750                         .amux     = EM28XX_AMUX_LINE_IN,
 751                 }, {
 752                         .type     = EM28XX_VMUX_SVIDEO,
 753                         .vmux     = SAA7115_SVIDEO3,
 754                         .amux     = EM28XX_AMUX_LINE_IN,
 755                 } },
 756         },
 757         [EM2820_BOARD_PINNACLE_DVC_90] = {
 758                 .name         = "Pinnacle Dazzle DVC 90/DVC 100",
 759                 .tuner_type   = TUNER_ABSENT,
 760                 .decoder      = EM28XX_SAA711X,
 761                 .input        = { {
 762                         .type     = EM28XX_VMUX_COMPOSITE1,
 763                         .vmux     = SAA7115_COMPOSITE0,
 764                         .amux     = EM28XX_AMUX_LINE_IN,
 765                 }, {
 766                         .type     = EM28XX_VMUX_SVIDEO,
 767                         .vmux     = SAA7115_SVIDEO3,
 768                         .amux     = EM28XX_AMUX_LINE_IN,
 769                 } },
 770         },
 771         [EM2800_BOARD_VGEAR_POCKETTV] = {
 772                 .name         = "V-Gear PocketTV",
 773                 .is_em2800    = 1,
 774                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 775                 .tda9887_conf = TDA9887_PRESENT,
 776                 .decoder      = EM28XX_SAA711X,
 777                 .input        = { {
 778                         .type     = EM28XX_VMUX_TELEVISION,
 779                         .vmux     = SAA7115_COMPOSITE2,
 780                         .amux     = EM28XX_AMUX_VIDEO,
 781                 }, {
 782                         .type     = EM28XX_VMUX_COMPOSITE1,
 783                         .vmux     = SAA7115_COMPOSITE0,
 784                         .amux     = EM28XX_AMUX_LINE_IN,
 785                 }, {
 786                         .type     = EM28XX_VMUX_SVIDEO,
 787                         .vmux     = SAA7115_SVIDEO3,
 788                         .amux     = EM28XX_AMUX_LINE_IN,
 789                 } },
 790         },
 791         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 792                 .name         = "Pixelview Prolink PlayTV USB 2.0",
 793                 .tda9887_conf = TDA9887_PRESENT,
 794                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 795                 .decoder      = EM28XX_SAA711X,
 796                 .input        = { {
 797                         .type     = EM28XX_VMUX_TELEVISION,
 798                         .vmux     = SAA7115_COMPOSITE2,
 799                         .amux     = EM28XX_AMUX_VIDEO,
 800                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
 801                                     EM28XX_AOUT_MASTER, /* Line out pin */
 802                 }, {
 803                         .type     = EM28XX_VMUX_COMPOSITE1,
 804                         .vmux     = SAA7115_COMPOSITE0,
 805                         .amux     = EM28XX_AMUX_LINE_IN,
 806                 }, {
 807                         .type     = EM28XX_VMUX_SVIDEO,
 808                         .vmux     = SAA7115_SVIDEO3,
 809                         .amux     = EM28XX_AMUX_LINE_IN,
 810                 } },
 811         },
 812         [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
 813                 .name                = "PointNix Intra-Oral Camera",
 814                 .has_snapshot_button = 1,
 815                 .tda9887_conf        = TDA9887_PRESENT,
 816                 .tuner_type          = TUNER_ABSENT,
 817                 .decoder             = EM28XX_SAA711X,
 818                 .input               = { {
 819                         .type     = EM28XX_VMUX_SVIDEO,
 820                         .vmux     = SAA7115_SVIDEO3,
 821                         .amux     = EM28XX_AMUX_VIDEO,
 822                 } },
 823         },
 824         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
 825                 .name         = "MSI DigiVox A/D",
 826                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 827                 .tuner_type   = TUNER_XC2028,
 828                 .decoder      = EM28XX_TVP5150,
 829                 .input        = { {
 830                         .type     = EM28XX_VMUX_TELEVISION,
 831                         .vmux     = TVP5150_COMPOSITE0,
 832                         .amux     = EM28XX_AMUX_VIDEO,
 833                 }, {
 834                         .type     = EM28XX_VMUX_COMPOSITE1,
 835                         .vmux     = TVP5150_COMPOSITE1,
 836                         .amux     = EM28XX_AMUX_LINE_IN,
 837                 }, {
 838                         .type     = EM28XX_VMUX_SVIDEO,
 839                         .vmux     = TVP5150_SVIDEO,
 840                         .amux     = EM28XX_AMUX_LINE_IN,
 841                 } },
 842         },
 843         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
 844                 .name         = "MSI DigiVox A/D II",
 845                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 846                 .tuner_type   = TUNER_XC2028,
 847                 .decoder      = EM28XX_TVP5150,
 848                 .input        = { {
 849                         .type     = EM28XX_VMUX_TELEVISION,
 850                         .vmux     = TVP5150_COMPOSITE0,
 851                         .amux     = EM28XX_AMUX_VIDEO,
 852                 }, {
 853                         .type     = EM28XX_VMUX_COMPOSITE1,
 854                         .vmux     = TVP5150_COMPOSITE1,
 855                         .amux     = EM28XX_AMUX_LINE_IN,
 856                 }, {
 857                         .type     = EM28XX_VMUX_SVIDEO,
 858                         .vmux     = TVP5150_SVIDEO,
 859                         .amux     = EM28XX_AMUX_LINE_IN,
 860                 } },
 861         },
 862         [EM2880_BOARD_KWORLD_DVB_305U] = {
 863                 .name         = "KWorld DVB-T 305U",
 864                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 865                 .tuner_type   = TUNER_XC2028,
 866                 .decoder      = EM28XX_TVP5150,
 867                 .input        = { {
 868                         .type     = EM28XX_VMUX_TELEVISION,
 869                         .vmux     = TVP5150_COMPOSITE0,
 870                         .amux     = EM28XX_AMUX_VIDEO,
 871                 }, {
 872                         .type     = EM28XX_VMUX_COMPOSITE1,
 873                         .vmux     = TVP5150_COMPOSITE1,
 874                         .amux     = EM28XX_AMUX_LINE_IN,
 875                 }, {
 876                         .type     = EM28XX_VMUX_SVIDEO,
 877                         .vmux     = TVP5150_SVIDEO,
 878                         .amux     = EM28XX_AMUX_LINE_IN,
 879                 } },
 880         },
 881         [EM2880_BOARD_KWORLD_DVB_310U] = {
 882                 .name         = "KWorld DVB-T 310U",
 883                 .tuner_type   = TUNER_XC2028,
 884                 .has_dvb      = 1,
 885                 .mts_firmware = 1,
 886                 .decoder      = EM28XX_TVP5150,
 887                 .input        = { {
 888                         .type     = EM28XX_VMUX_TELEVISION,
 889                         .vmux     = TVP5150_COMPOSITE0,
 890                         .amux     = EM28XX_AMUX_VIDEO,
 891                 }, {
 892                         .type     = EM28XX_VMUX_COMPOSITE1,
 893                         .vmux     = TVP5150_COMPOSITE1,
 894                         .amux     = EM28XX_AMUX_LINE_IN,
 895                 }, {    /* S-video has not been tested yet */
 896                         .type     = EM28XX_VMUX_SVIDEO,
 897                         .vmux     = TVP5150_SVIDEO,
 898                         .amux     = EM28XX_AMUX_LINE_IN,
 899                 } },
 900         },
 901         [EM2881_BOARD_DNT_DA2_HYBRID] = {
 902                 .name         = "DNT DA2 Hybrid",
 903                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 904                 .tuner_type   = TUNER_XC2028,
 905                 .decoder      = EM28XX_TVP5150,
 906                 .input        = { {
 907                         .type     = EM28XX_VMUX_TELEVISION,
 908                         .vmux     = TVP5150_COMPOSITE0,
 909                         .amux     = EM28XX_AMUX_VIDEO,
 910                 }, {
 911                         .type     = EM28XX_VMUX_COMPOSITE1,
 912                         .vmux     = TVP5150_COMPOSITE1,
 913                         .amux     = EM28XX_AMUX_LINE_IN,
 914                 }, {
 915                         .type     = EM28XX_VMUX_SVIDEO,
 916                         .vmux     = TVP5150_SVIDEO,
 917                         .amux     = EM28XX_AMUX_LINE_IN,
 918                 } },
 919         },
 920         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
 921                 .name         = "Pinnacle Hybrid Pro",
 922                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 923                 .tuner_type   = TUNER_XC2028,
 924                 .decoder      = EM28XX_TVP5150,
 925                 .input        = { {
 926                         .type     = EM28XX_VMUX_TELEVISION,
 927                         .vmux     = TVP5150_COMPOSITE0,
 928                         .amux     = EM28XX_AMUX_VIDEO,
 929                 }, {
 930                         .type     = EM28XX_VMUX_COMPOSITE1,
 931                         .vmux     = TVP5150_COMPOSITE1,
 932                         .amux     = EM28XX_AMUX_LINE_IN,
 933                 }, {
 934                         .type     = EM28XX_VMUX_SVIDEO,
 935                         .vmux     = TVP5150_SVIDEO,
 936                         .amux     = EM28XX_AMUX_LINE_IN,
 937                 } },
 938         },
 939         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
 940                 .name         = "Pinnacle Hybrid Pro (2)",
 941                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 942                 .tuner_type   = TUNER_XC2028,
 943                 .mts_firmware = 1,
 944                 .decoder      = EM28XX_TVP5150,
 945                 .input        = { {
 946                         .type     = EM28XX_VMUX_TELEVISION,
 947                         .vmux     = TVP5150_COMPOSITE0,
 948                         .amux     = EM28XX_AMUX_VIDEO,
 949                 }, {
 950                         .type     = EM28XX_VMUX_COMPOSITE1,
 951                         .vmux     = TVP5150_COMPOSITE1,
 952                         .amux     = EM28XX_AMUX_LINE_IN,
 953                 }, {
 954                         .type     = EM28XX_VMUX_SVIDEO,
 955                         .vmux     = TVP5150_SVIDEO,
 956                         .amux     = EM28XX_AMUX_LINE_IN,
 957                 } },
 958         },
 959         [EM2882_BOARD_KWORLD_VS_DVBT] = {
 960                 .name         = "Kworld VS-DVB-T 323UR",
 961                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 962                 .tuner_type   = TUNER_XC2028,
 963                 .decoder      = EM28XX_TVP5150,
 964                 .input        = { {
 965                         .type     = EM28XX_VMUX_TELEVISION,
 966                         .vmux     = TVP5150_COMPOSITE0,
 967                         .amux     = EM28XX_AMUX_VIDEO,
 968                 }, {
 969                         .type     = EM28XX_VMUX_COMPOSITE1,
 970                         .vmux     = TVP5150_COMPOSITE1,
 971                         .amux     = EM28XX_AMUX_LINE_IN,
 972                 }, {
 973                         .type     = EM28XX_VMUX_SVIDEO,
 974                         .vmux     = TVP5150_SVIDEO,
 975                         .amux     = EM28XX_AMUX_LINE_IN,
 976                 } },
 977         },
 978         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
 979                 .name         = "Terratec Hybrid XS (em2882)",
 980                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 981                 .tuner_type   = TUNER_XC2028,
 982                 .decoder      = EM28XX_TVP5150,
 983                 .input        = { {
 984                         .type     = EM28XX_VMUX_TELEVISION,
 985                         .vmux     = TVP5150_COMPOSITE0,
 986                         .amux     = EM28XX_AMUX_VIDEO,
 987                 }, {
 988                         .type     = EM28XX_VMUX_COMPOSITE1,
 989                         .vmux     = TVP5150_COMPOSITE1,
 990                         .amux     = EM28XX_AMUX_LINE_IN,
 991                 }, {
 992                         .type     = EM28XX_VMUX_SVIDEO,
 993                         .vmux     = TVP5150_SVIDEO,
 994                         .amux     = EM28XX_AMUX_LINE_IN,
 995                 } },
 996         },
 997         [EM2883_BOARD_KWORLD_HYBRID_A316] = {
 998                 .name         = "Kworld PlusTV HD Hybrid 330",
 999                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1000                 .tuner_type   = TUNER_XC2028,
1001                 .decoder      = EM28XX_TVP5150,
1002                 .input        = { {
1003                         .type     = EM28XX_VMUX_TELEVISION,
1004                         .vmux     = TVP5150_COMPOSITE0,
1005                         .amux     = EM28XX_AMUX_VIDEO,
1006                 }, {
1007                         .type     = EM28XX_VMUX_COMPOSITE1,
1008                         .vmux     = TVP5150_COMPOSITE1,
1009                         .amux     = EM28XX_AMUX_LINE_IN,
1010                 }, {
1011                         .type     = EM28XX_VMUX_SVIDEO,
1012                         .vmux     = TVP5150_SVIDEO,
1013                         .amux     = EM28XX_AMUX_LINE_IN,
1014                 } },
1015         },
1016         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1017                 .name         = "Compro VideoMate ForYou/Stereo",
1018                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1019                 .tda9887_conf = TDA9887_PRESENT,
1020                 .decoder      = EM28XX_TVP5150,
1021                 .input        = { {
1022                         .type     = EM28XX_VMUX_TELEVISION,
1023                         .vmux     = TVP5150_COMPOSITE0,
1024                         .amux     = EM28XX_AMUX_LINE_IN,
1025                 }, {
1026                         .type     = EM28XX_VMUX_SVIDEO,
1027                         .vmux     = TVP5150_SVIDEO,
1028                         .amux     = EM28XX_AMUX_LINE_IN,
1029                 } },
1030         },
1031         [EM2874_BOARD_PINNACLE_PCTV_80E] = {
1032                 .name         = "Pinnacle PCTV HD Mini",
1033                 .tuner_type   = TUNER_ABSENT,
1034                 .has_dvb      = 1,
1035                 .ir_codes     = ir_codes_pinnacle_pctv_hd,
1036                 .decoder      = EM28XX_NODECODER,
1037                 .i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
1038                                 EM2874_I2C_SECONDARY_BUS_SELECT |
1039                                 EM28XX_I2C_FREQ_400_KHZ,
1040 #ifdef DJH_DEBUG
1041                 .input        = { {
1042                         .type     = EM28XX_VMUX_TELEVISION,
1043                         .vmux     = TVP5150_COMPOSITE0,
1044                         .amux     = EM28XX_AMUX_LINE_IN,
1045                 } },
1046 #endif
1047         },
1048 };
1049 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1050
1051 /* table of devices that work with this driver */
1052 struct usb_device_id em28xx_id_table [] = {
1053         { USB_DEVICE(0xeb1a, 0x2750),
1054                         .driver_info = EM2750_BOARD_UNKNOWN },
1055         { USB_DEVICE(0xeb1a, 0x2751),
1056                         .driver_info = EM2750_BOARD_UNKNOWN },
1057         { USB_DEVICE(0xeb1a, 0x2800),
1058                         .driver_info = EM2800_BOARD_UNKNOWN },
1059         { USB_DEVICE(0xeb1a, 0x2820),
1060                         .driver_info = EM2820_BOARD_UNKNOWN },
1061         { USB_DEVICE(0xeb1a, 0x2821),
1062                         .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 },
1063         { USB_DEVICE(0xeb1a, 0x2860),
1064                         .driver_info = EM2820_BOARD_UNKNOWN },
1065         { USB_DEVICE(0xeb1a, 0x2861),
1066                         .driver_info = EM2820_BOARD_UNKNOWN },
1067         { USB_DEVICE(0xeb1a, 0x2870),
1068                         .driver_info = EM2820_BOARD_UNKNOWN },
1069         { USB_DEVICE(0xeb1a, 0x2881),
1070                         .driver_info = EM2820_BOARD_UNKNOWN },
1071         { USB_DEVICE(0xeb1a, 0x2883),
1072                         .driver_info = EM2820_BOARD_UNKNOWN },
1073         { USB_DEVICE(0xeb1a, 0xe300),
1074                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1075         { USB_DEVICE(0xeb1a, 0xe305),
1076                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1077         { USB_DEVICE(0xeb1a, 0xe310),
1078                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1079         { USB_DEVICE(0xeb1a, 0xa316),
1080                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
1081         { USB_DEVICE(0xeb1a, 0xe320),
1082                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1083         { USB_DEVICE(0xeb1a, 0xe323),
1084                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1085         { USB_DEVICE(0xeb1a, 0xe350),
1086                         .driver_info = EM2870_BOARD_KWORLD_350U },
1087         { USB_DEVICE(0xeb1a, 0xe355),
1088                         .driver_info = EM2870_BOARD_KWORLD_355U },
1089         { USB_DEVICE(0xeb1a, 0x2801),
1090                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1091         { USB_DEVICE(0xeb1a, 0xe357),
1092                         .driver_info = EM2870_BOARD_KWORLD_355U },
1093         { USB_DEVICE(0x0ccd, 0x0036),
1094                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1095         { USB_DEVICE(0x0ccd, 0x004c),
1096                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1097         { USB_DEVICE(0x0ccd, 0x004f),
1098                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1099         { USB_DEVICE(0x0ccd, 0x005e),
1100                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1101         { USB_DEVICE(0x0ccd, 0x0042),
1102                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1103         { USB_DEVICE(0x0ccd, 0x0043),
1104                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1105         { USB_DEVICE(0x0ccd, 0x0047),
1106                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1107         { USB_DEVICE(0x185b, 0x2870),
1108                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1109         { USB_DEVICE(0x185b, 0x2041),
1110                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1111         { USB_DEVICE(0x2040, 0x4200),
1112                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1113         { USB_DEVICE(0x2040, 0x4201),
1114                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1115         { USB_DEVICE(0x2040, 0x6500),
1116                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1117         { USB_DEVICE(0x2040, 0x6502),
1118                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1119         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1120                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1121         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1122                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1123         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1124                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1125         { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
1126                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1127         { USB_DEVICE(0x0438, 0xb002),
1128                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1129         { USB_DEVICE(0x2001, 0xf112),
1130                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1131         { USB_DEVICE(0x2304, 0x0207),
1132                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1133         { USB_DEVICE(0x2304, 0x0208),
1134                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1135         { USB_DEVICE(0x2304, 0x021a),
1136                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1137         { USB_DEVICE(0x2304, 0x0226),
1138                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1139         { USB_DEVICE(0x2304, 0x0227),
1140                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1141         { USB_DEVICE(0x2304, 0x023f),
1142                         .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
1143         { USB_DEVICE(0x0413, 0x6023),
1144                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1145         { USB_DEVICE(0x093b, 0xa005),
1146                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1147         { },
1148 };
1149 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1150
1151 /*
1152  *  Reset sequences for analog/digital modes
1153  */
1154
1155 /* Reset for the most [analog] boards */
1156 static struct em28xx_reg_seq default_analog[] = {
1157         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
1158         {       -1,             -1,     -1,             -1},
1159 };
1160
1161 /* Reset for the most [digital] boards */
1162 static struct em28xx_reg_seq default_digital[] = {
1163         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
1164         {       -1,             -1,     -1,             -1},
1165 };
1166
1167 /* Board Hauppauge WinTV HVR 900 analog */
1168 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
1169         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
1170         {0x05,                  0xff,   0x10,           10},
1171         {  -1,                  -1,     -1,             -1},
1172 };
1173
1174 /* Board Hauppauge WinTV HVR 900 digital */
1175 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
1176         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
1177         {EM2880_R04_GPO,        0x04,   0x0f,           10},
1178         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
1179         { -1,                   -1,     -1,             -1},
1180 };
1181
1182 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1183 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
1184         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
1185         {       -1,             -1,     -1,              -1},
1186 };
1187
1188 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1189 static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
1190         {EM28XX_R08_GPIO,       0x6a,   ~EM_GPIO_4,     10},
1191         {       -1,             -1,     -1,             -1},
1192 };
1193
1194 /* Board  - EM2870 Kworld 355u
1195    Analog - No input analog */
1196 static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
1197         {EM2880_R04_GPO,        0x01,   0xff,           10},
1198         {  -1,                  -1,     -1,             -1},
1199 };
1200
1201 /* Callback for the most boards */
1202 static struct em28xx_reg_seq default_callback[] = {
1203         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1204         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
1205         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1206         {  -1,                  -1,             -1,             -1},
1207 };
1208
1209 /* Pinnacle PCTV HD Mini (80e) GPIOs
1210    0-5: not used
1211    6:   demod reset, active low
1212    7:   LED on, active high */
1213 static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
1214         {EM28XX_R06_I2C_CLK,    0x45,   0xff,             10}, /*400 KHz*/
1215         {EM2874_R80_GPIO,       0x80,   0xff,             100},/*Demod reset*/
1216         {EM2874_R80_GPIO,       0xc0,   0xff,             10},
1217         {  -1,                  -1,     -1,               -1},
1218 };
1219
1220 /*
1221  * EEPROM hash table for devices with generic USB IDs
1222  */
1223 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
1224         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1225         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1226         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1227 };
1228
1229 /* I2C devicelist hash table for devices with generic USB IDs */
1230 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1231         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1232         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1233         {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1234 };
1235
1236 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1237 {
1238         int rc = 0;
1239         struct em28xx *dev = ptr;
1240
1241         if (dev->tuner_type != TUNER_XC2028)
1242                 return 0;
1243
1244         if (command != XC2028_TUNER_RESET)
1245                 return 0;
1246
1247         rc = em28xx_gpio_set(dev, dev->tuner_gpio);
1248
1249         return rc;
1250 }
1251 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1252
1253 static void inline em28xx_set_model(struct em28xx *dev)
1254 {
1255         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1256 }
1257
1258 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1259  * this won't work for boards with generic PCI IDs
1260  */
1261 void em28xx_pre_card_setup(struct em28xx *dev)
1262 {
1263         int rc;
1264
1265         em28xx_set_model(dev);
1266
1267         em28xx_info("Found %s\n", dev->board.name);
1268
1269         /* Set the default GPO/GPIO for legacy devices */
1270         dev->reg_gpo_num = EM2880_R04_GPO;
1271         dev->reg_gpio_num = EM28XX_R08_GPIO;
1272
1273         dev->wait_after_write = 5;
1274
1275         /* Based on the Chip ID, set the device configuration */
1276         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1277         if (rc > 0) {
1278                 dev->chip_id = rc;
1279
1280                 switch (dev->chip_id) {
1281                 case CHIP_ID_EM2750:
1282                         em28xx_info("chip ID is em2750\n");
1283                         break;
1284                 case CHIP_ID_EM2820:
1285                         em28xx_info("chip ID is em2820\n");
1286                         break;
1287                 case CHIP_ID_EM2840:
1288                         em28xx_info("chip ID is em2840\n");
1289                         break;
1290                 case CHIP_ID_EM2860:
1291                         em28xx_info("chip ID is em2860\n");
1292                         break;
1293                 case CHIP_ID_EM2874:
1294                         em28xx_info("chip ID is em2874\n");
1295                         dev->reg_gpio_num = EM2874_R80_GPIO;
1296                         dev->wait_after_write = 0;
1297                         break;
1298                 case CHIP_ID_EM2883:
1299                         em28xx_info("chip ID is em2882/em2883\n");
1300                         dev->wait_after_write = 0;
1301                         break;
1302                 default:
1303                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1304                 }
1305         }
1306
1307         /* Prepopulate cached GPO register content */
1308         rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1309         if (rc >= 0)
1310                 dev->reg_gpo = rc;
1311
1312         /* Those are the default values for the majority of boards
1313            Use those values if not specified otherwise at boards entry
1314          */
1315         if (!dev->board.xclk)
1316                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1317                                   EM28XX_XCLK_FREQUENCY_12MHZ;
1318
1319         if (!dev->board.i2c_speed)
1320                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1321                                        EM28XX_I2C_FREQ_100_KHZ;
1322
1323         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1324         em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1325         msleep(50);
1326
1327         /* request some modules */
1328         switch (dev->model) {
1329         case EM2880_BOARD_TERRATEC_PRODIGY_XS:
1330         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1331         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1332         case EM2860_BOARD_TERRATEC_HYBRID_XS:
1333         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1334         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1335         case EM2882_BOARD_PINNACLE_HYBRID_PRO:
1336         case EM2883_BOARD_KWORLD_HYBRID_A316:
1337         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1338                 /* Sets GPO/GPIO sequences for this device */
1339                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1340                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1341                 break;
1342
1343         case EM2882_BOARD_TERRATEC_HYBRID_XS:
1344                 /* Sets GPO/GPIO sequences for this device */
1345                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1346                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1347                 break;
1348
1349         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
1350         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1351         case EM2870_BOARD_TERRATEC_XS:
1352         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
1353         case EM2880_BOARD_KWORLD_DVB_310U:
1354         case EM2870_BOARD_KWORLD_350U:
1355         case EM2881_BOARD_DNT_DA2_HYBRID:
1356                 /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
1357                          and analog commands. If this commands doesn't work,
1358                          add this timer. */
1359
1360                 /* Sets GPO/GPIO sequences for this device */
1361                 dev->analog_gpio      = default_analog;
1362                 dev->digital_gpio     = default_digital;
1363                 break;
1364
1365         case EM2880_BOARD_MSI_DIGIVOX_AD:
1366         case EM2880_BOARD_MSI_DIGIVOX_AD_II:
1367                 /* Sets GPO/GPIO sequences for this device */
1368                 dev->analog_gpio      = em2880_msi_digivox_ad_analog;
1369                 dev->digital_gpio     = em2880_msi_digivox_ad_digital;
1370                 break;
1371
1372         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1373                 /* FIXME guess */
1374                 /* Turn on analog audio output */
1375                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1376                 break;
1377
1378         case EM2861_BOARD_KWORLD_PVRTV_300U:
1379         case EM2880_BOARD_KWORLD_DVB_305U:
1380                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1381                 msleep(10);
1382                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1383                 msleep(10);
1384                 break;
1385
1386         case EM2870_BOARD_KWORLD_355U:
1387                 /* Sets GPO/GPIO sequences for this device */
1388                 dev->digital_gpio     = em2870_kworld_355u_digital;
1389                 break;
1390
1391         case EM2870_BOARD_COMPRO_VIDEOMATE:
1392                 /* TODO: someone can do some cleanup here...
1393                          not everything's needed */
1394                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1395                 msleep(10);
1396                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1397                 msleep(10);
1398                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1399                 mdelay(70);
1400                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1401                 mdelay(70);
1402                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1403                 mdelay(70);
1404                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1405                 mdelay(70);
1406                 break;
1407
1408         case EM2870_BOARD_TERRATEC_XS_MT2060:
1409                 /* this device needs some gpio writes to get the DVB-T
1410                    demod work */
1411                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1412                 mdelay(70);
1413                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1414                 mdelay(70);
1415                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1416                 mdelay(70);
1417                 break;
1418
1419         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1420                 /* this device needs some gpio writes to get the
1421                    DVB-T demod work */
1422                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1423                 mdelay(70);
1424                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1425                 mdelay(70);
1426                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1427                 mdelay(70);
1428                 break;
1429
1430         case EM2820_BOARD_GADMEI_UTV310:
1431         case EM2820_BOARD_MSI_VOX_USB_2:
1432                 /* enables audio for that devices */
1433                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1434                 break;
1435
1436         case EM2874_BOARD_PINNACLE_PCTV_80E:
1437                 dev->digital_gpio = em2874_pinnacle_80e_digital;
1438                 break;
1439         }
1440
1441         /* Sets the default callback. Used only for certain tuners */
1442         if (!dev->tuner_gpio)
1443                 dev->tuner_gpio       = default_callback;
1444
1445         em28xx_gpio_set(dev, dev->tuner_gpio);
1446         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1447
1448         /* Unlock device */
1449         em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
1450 }
1451
1452 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1453 {
1454         memset(ctl, 0, sizeof(*ctl));
1455
1456         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1457         ctl->max_len = 64;
1458         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1459
1460         switch (dev->model) {
1461         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1462                 ctl->demod = XC3028_FE_ZARLINK456;
1463                 break;
1464         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1465                 ctl->demod = XC3028_FE_ZARLINK456;
1466                 break;
1467         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1468                 /* djh - Not sure which demod we need here */
1469                 ctl->demod = XC3028_FE_DEFAULT;
1470                 break;
1471         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1472                 ctl->demod = XC3028_FE_DEFAULT;
1473                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1474                 break;
1475         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1476         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1477                 /* FIXME: Better to specify the needed IF */
1478                 ctl->demod = XC3028_FE_DEFAULT;
1479                 break;
1480         default:
1481                 ctl->demod = XC3028_FE_OREN538;
1482         }
1483 }
1484
1485 static void em28xx_config_tuner(struct em28xx *dev)
1486 {
1487         struct v4l2_priv_tun_config  xc2028_cfg;
1488         struct tuner_setup           tun_setup;
1489         struct v4l2_frequency        f;
1490
1491         if (dev->tuner_type == TUNER_ABSENT)
1492                 return;
1493
1494         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1495         tun_setup.type = dev->tuner_type;
1496         tun_setup.addr = dev->tuner_addr;
1497         tun_setup.tuner_callback = em28xx_tuner_callback;
1498
1499         em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
1500
1501         if (dev->tuner_type == TUNER_XC2028) {
1502                 struct xc2028_ctrl           ctl;
1503
1504                 em28xx_setup_xc3028(dev, &ctl);
1505
1506                 xc2028_cfg.tuner = TUNER_XC2028;
1507                 xc2028_cfg.priv  = &ctl;
1508
1509                 em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
1510         }
1511
1512         /* configure tuner */
1513         f.tuner = 0;
1514         f.type = V4L2_TUNER_ANALOG_TV;
1515         f.frequency = 9076;     /* just a magic number */
1516         dev->ctl_freq = f.frequency;
1517         em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
1518 }
1519
1520 static int em28xx_hint_board(struct em28xx *dev)
1521 {
1522         int i;
1523
1524         /* HINT method: EEPROM
1525          *
1526          * This method works only for boards with eeprom.
1527          * Uses a hash of all eeprom bytes. The hash should be
1528          * unique for a vendor/tuner pair.
1529          * There are a high chance that tuners for different
1530          * video standards produce different hashes.
1531          */
1532         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1533                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1534                         dev->model = em28xx_eeprom_hash[i].model;
1535                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1536
1537                         em28xx_errdev("Your board has no unique USB ID.\n");
1538                         em28xx_errdev("A hint were successfully done, "
1539                                       "based on eeprom hash.\n");
1540                         em28xx_errdev("This method is not 100%% failproof.\n");
1541                         em28xx_errdev("If the board were missdetected, "
1542                                       "please email this log to:\n");
1543                         em28xx_errdev("\tV4L Mailing List "
1544                                       " <video4linux-list@redhat.com>\n");
1545                         em28xx_errdev("Board detected as %s\n",
1546                                       em28xx_boards[dev->model].name);
1547
1548                         return 0;
1549                 }
1550         }
1551
1552         /* HINT method: I2C attached devices
1553          *
1554          * This method works for all boards.
1555          * Uses a hash of i2c scanned devices.
1556          * Devices with the same i2c attached chips will
1557          * be considered equal.
1558          * This method is less precise than the eeprom one.
1559          */
1560
1561         /* user did not request i2c scanning => do it now */
1562         if (!dev->i2c_hash)
1563                 em28xx_do_i2c_scan(dev);
1564
1565         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1566                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1567                         dev->model = em28xx_i2c_hash[i].model;
1568                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
1569                         em28xx_errdev("Your board has no unique USB ID.\n");
1570                         em28xx_errdev("A hint were successfully done, "
1571                                       "based on i2c devicelist hash.\n");
1572                         em28xx_errdev("This method is not 100%% failproof.\n");
1573                         em28xx_errdev("If the board were missdetected, "
1574                                       "please email this log to:\n");
1575                         em28xx_errdev("\tV4L Mailing List "
1576                                       " <video4linux-list@redhat.com>\n");
1577                         em28xx_errdev("Board detected as %s\n",
1578                                       em28xx_boards[dev->model].name);
1579
1580                         return 0;
1581                 }
1582         }
1583
1584         em28xx_errdev("Your board has no unique USB ID and thus need a "
1585                       "hint to be detected.\n");
1586         em28xx_errdev("You may try to use card=<n> insmod option to "
1587                       "workaround that.\n");
1588         em28xx_errdev("Please send an email with this log to:\n");
1589         em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
1590         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1591         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1592
1593         em28xx_errdev("Here is a list of valid choices for the card=<n>"
1594                       " insmod option:\n");
1595         for (i = 0; i < em28xx_bcount; i++) {
1596                 em28xx_errdev("    card=%d -> %s\n",
1597                                 i, em28xx_boards[i].name);
1598         }
1599         return -1;
1600 }
1601
1602 /* ----------------------------------------------------------------------- */
1603 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1604 {
1605         if (disable_ir) {
1606                 ir->get_key = NULL;
1607                 return ;
1608         }
1609
1610         /* detect & configure */
1611         switch (dev->model) {
1612         case (EM2800_BOARD_UNKNOWN):
1613                 break;
1614         case (EM2820_BOARD_UNKNOWN):
1615                 break;
1616         case (EM2800_BOARD_TERRATEC_CINERGY_200):
1617         case (EM2820_BOARD_TERRATEC_CINERGY_250):
1618                 ir->ir_codes = ir_codes_em_terratec;
1619                 ir->get_key = em28xx_get_key_terratec;
1620                 snprintf(ir->c.name, sizeof(ir->c.name),
1621                          "i2c IR (EM28XX Terratec)");
1622                 break;
1623         case (EM2820_BOARD_PINNACLE_USB_2):
1624                 ir->ir_codes = ir_codes_pinnacle_grey;
1625                 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1626                 snprintf(ir->c.name, sizeof(ir->c.name),
1627                          "i2c IR (EM28XX Pinnacle PCTV)");
1628                 break;
1629         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1630                 ir->ir_codes = ir_codes_hauppauge_new;
1631                 ir->get_key = em28xx_get_key_em_haup;
1632                 snprintf(ir->c.name, sizeof(ir->c.name),
1633                          "i2c IR (EM2840 Hauppauge)");
1634                 break;
1635         case (EM2820_BOARD_MSI_VOX_USB_2):
1636                 break;
1637         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1638                 break;
1639         case (EM2800_BOARD_KWORLD_USB2800):
1640                 break;
1641         case (EM2800_BOARD_GRABBEEX_USB2800):
1642                 break;
1643         }
1644 }
1645
1646 void em28xx_card_setup(struct em28xx *dev)
1647 {
1648         em28xx_set_model(dev);
1649
1650         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1651         if (em28xx_boards[dev->model].tuner_addr)
1652                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
1653
1654         /* request some modules */
1655         switch (dev->model) {
1656         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1657         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1658         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1659         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1660         {
1661                 struct tveeprom tv;
1662 #ifdef CONFIG_MODULES
1663                 request_module("tveeprom");
1664 #endif
1665                 /* Call first TVeeprom */
1666
1667                 dev->i2c_client.addr = 0xa0 >> 1;
1668                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1669
1670                 dev->tuner_type = tv.tuner_type;
1671
1672                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1673                         dev->i2s_speed = 2048000;
1674                         dev->board.has_msp34xx = 1;
1675                 }
1676 #ifdef CONFIG_MODULES
1677                 if (tv.has_ir)
1678                         request_module("ir-kbd-i2c");
1679 #endif
1680                 break;
1681         }
1682         case EM2820_BOARD_KWORLD_PVRTV2800RF:
1683                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1684                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
1685                 break;
1686         case EM2820_BOARD_UNKNOWN:
1687         case EM2800_BOARD_UNKNOWN:
1688                 /*
1689                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
1690                  *
1691                  * This occurs because they share identical USB vendor and
1692                  * product IDs.
1693                  *
1694                  * What we do here is look up the EEPROM hash of the K-WORLD
1695                  * and if it is found then we decide that we do not have
1696                  * a DIGIVOX and reset the device to the K-WORLD instead.
1697                  *
1698                  * This solution is only valid if they do not share eeprom
1699                  * hash identities which has not been determined as yet.
1700                  */
1701         case EM2880_BOARD_MSI_DIGIVOX_AD:
1702                 if (!em28xx_hint_board(dev))
1703                         em28xx_set_model(dev);
1704                 break;
1705         }
1706
1707         if (dev->board.has_snapshot_button)
1708                 em28xx_register_snapshot_button(dev);
1709
1710         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
1711                 em28xx_errdev("\n\n");
1712                 em28xx_errdev("The support for this board weren't "
1713                               "valid yet.\n");
1714                 em28xx_errdev("Please send a report of having this working\n");
1715                 em28xx_errdev("not to V4L mailing list (and/or to other "
1716                                 "addresses)\n\n");
1717         }
1718
1719         /* Allow override tuner type by a module parameter */
1720         if (tuner >= 0)
1721                 dev->tuner_type = tuner;
1722
1723 #ifdef CONFIG_MODULES
1724         /* request some modules */
1725         if (dev->board.has_msp34xx)
1726                 request_module("msp3400");
1727         if (dev->board.decoder == EM28XX_SAA711X)
1728                 request_module("saa7115");
1729         if (dev->board.decoder == EM28XX_TVP5150)
1730                 request_module("tvp5150");
1731         if (dev->board.tuner_type != TUNER_ABSENT)
1732                 request_module("tuner");
1733 #endif
1734
1735         em28xx_config_tuner(dev);
1736
1737         em28xx_ir_init(dev);
1738 }
1739