SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/media/video/c-qcam.c

   1 /*
   2  *      Video4Linux Colour QuickCam driver
   3  *      Copyright 1997-2000 Philip Blundell <philb@gnu.org>
   4  *
   5  *    Module parameters:
   6  *
   7  *      parport=auto      -- probe all parports (default)
   8  *      parport=0         -- parport0 becomes qcam1
   9  *      parport=2,0,1     -- parports 2,0,1 are tried in that order
  10  *
  11  *      probe=0           -- do no probing, assume camera is present
  12  *      probe=1           -- use IEEE-1284 autoprobe data only (default)
  13  *      probe=2           -- probe aggressively for cameras
  14  *
  15  *      force_rgb=1       -- force data format to RGB (default is BGR)
  16  *
  17  * The parport parameter controls which parports will be scanned.
  18  * Scanning all parports causes some printers to print a garbage page.
  19  *       -- March 14, 1999  Billy Donahue <billy@escape.com>
  20  *
  21  * Fixed data format to BGR, added force_rgb parameter. Added missing
  22  * parport_unregister_driver() on module removal.
  23  *       -- May 28, 2000  Claudio Matsuoka <claudio@conectiva.com>
  24  */
  25
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/errno.h>
  29 #include <linux/fs.h>
  30 #include <linux/init.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/mm.h>
  34 #include <linux/parport.h>
  35 #include <linux/sched.h>
  36 #include <linux/videodev.h>
  37 #include <media/v4l2-common.h>
  38 #include <media/v4l2-ioctl.h>
  39 #include <linux/mutex.h>
  40 #include <linux/jiffies.h>
  41
  42 #include <asm/uaccess.h>
  43
  44 struct qcam_device {
  45         struct video_device vdev;
  46         struct pardevice *pdev;
  47         struct parport *pport;
  48         int width, height;
  49         int ccd_width, ccd_height;
  50         int mode;
  51         int contrast, brightness, whitebal;
  52         int top, left;
  53         unsigned int bidirectional;
  54         struct mutex lock;
  55 };
  56
  57 /* cameras maximum */
  58 #define MAX_CAMS 4
  59
  60 /* The three possible QuickCam modes */
  61 #define QC_MILLIONS     0x18
  62 #define QC_BILLIONS     0x10
  63 #define QC_THOUSANDS    0x08    /* with VIDEC compression (not supported) */
  64
  65 /* The three possible decimations */
  66 #define QC_DECIMATION_1         0
  67 #define QC_DECIMATION_2         2
  68 #define QC_DECIMATION_4         4
  69
  70 #define BANNER "Colour QuickCam for Video4Linux v0.05"
  71
  72 static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
  73 static int probe = 2;
  74 static int force_rgb;
  75 static int video_nr = -1;
  76
  77 static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i)
  78 {
  79         /* note: the QC specs refer to the PCAck pin by voltage, not
  80            software level.  PC ports have builtin inverters. */
  81         parport_frob_control(qcam->pport, 8, i?8:0);
  82 }
  83
  84 static inline unsigned int qcam_ready1(struct qcam_device *qcam)
  85 {
  86         return (parport_read_status(qcam->pport) & 0x8)?1:0;
  87 }
  88
  89 static inline unsigned int qcam_ready2(struct qcam_device *qcam)
  90 {
  91         return (parport_read_data(qcam->pport) & 0x1)?1:0;
  92 }
  93
  94 static unsigned int qcam_await_ready1(struct qcam_device *qcam,
  95                                              int value)
  96 {
  97         unsigned long oldjiffies = jiffies;
  98         unsigned int i;
  99
 100         for (oldjiffies = jiffies;
 101              time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); )
 102                 if (qcam_ready1(qcam) == value)
 103                         return 0;
 104
 105         /* If the camera didn't respond within 1/25 second, poll slowly
 106            for a while. */
 107         for (i = 0; i < 50; i++)
 108         {
 109                 if (qcam_ready1(qcam) == value)
 110                         return 0;
 111                 msleep_interruptible(100);
 112         }
 113
 114         /* Probably somebody pulled the plug out.  Not much we can do. */
 115         printk(KERN_ERR "c-qcam: ready1 timeout (%d) %x %x\n", value,
 116                parport_read_status(qcam->pport),
 117                parport_read_control(qcam->pport));
 118         return 1;
 119 }
 120
 121 static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
 122 {
 123         unsigned long oldjiffies = jiffies;
 124         unsigned int i;
 125
 126         for (oldjiffies = jiffies;
 127              time_before(jiffies, oldjiffies + msecs_to_jiffies(40)); )
 128                 if (qcam_ready2(qcam) == value)
 129                         return 0;
 130
 131         /* If the camera didn't respond within 1/25 second, poll slowly
 132            for a while. */
 133         for (i = 0; i < 50; i++)
 134         {
 135                 if (qcam_ready2(qcam) == value)
 136                         return 0;
 137                 msleep_interruptible(100);
 138         }
 139
 140         /* Probably somebody pulled the plug out.  Not much we can do. */
 141         printk(KERN_ERR "c-qcam: ready2 timeout (%d) %x %x %x\n", value,
 142                parport_read_status(qcam->pport),
 143                parport_read_control(qcam->pport),
 144                parport_read_data(qcam->pport));
 145         return 1;
 146 }
 147
 148 static int qcam_read_data(struct qcam_device *qcam)
 149 {
 150         unsigned int idata;
 151         qcam_set_ack(qcam, 0);
 152         if (qcam_await_ready1(qcam, 1)) return -1;
 153         idata = parport_read_status(qcam->pport) & 0xf0;
 154         qcam_set_ack(qcam, 1);
 155         if (qcam_await_ready1(qcam, 0)) return -1;
 156         idata |= (parport_read_status(qcam->pport) >> 4);
 157         return idata;
 158 }
 159
 160 static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
 161 {
 162         unsigned int idata;
 163         parport_write_data(qcam->pport, data);
 164         idata = qcam_read_data(qcam);
 165         if (data != idata)
 166         {
 167                 printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
 168                        idata);
 169                 return 1;
 170         }
 171         return 0;
 172 }
 173
 174 static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned int data)
 175 {
 176         if (qcam_write_data(qcam, cmd))
 177                 return -1;
 178         if (qcam_write_data(qcam, data))
 179                 return -1;
 180         return 0;
 181 }
 182
 183 static inline int qcam_get(struct qcam_device *qcam, unsigned int cmd)
 184 {
 185         if (qcam_write_data(qcam, cmd))
 186                 return -1;
 187         return qcam_read_data(qcam);
 188 }
 189
 190 static int qc_detect(struct qcam_device *qcam)
 191 {
 192         unsigned int stat, ostat, i, count = 0;
 193
 194         /* The probe routine below is not very reliable.  The IEEE-1284
 195            probe takes precedence. */
 196         /* XXX Currently parport provides no way to distinguish between
 197            "the IEEE probe was not done" and "the probe was done, but
 198            no device was found".  Fix this one day. */
 199         if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
 200             && qcam->pport->probe_info[0].model
 201             && !strcmp(qcam->pdev->port->probe_info[0].model,
 202                        "Color QuickCam 2.0")) {
 203                 printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
 204                 return 1;
 205         }
 206
 207         if (probe < 2)
 208                 return 0;
 209
 210         parport_write_control(qcam->pport, 0xc);
 211
 212         /* look for a heartbeat */
 213         ostat = stat = parport_read_status(qcam->pport);
 214         for (i=0; i<250; i++)
 215         {
 216                 mdelay(1);
 217                 stat = parport_read_status(qcam->pport);
 218                 if (ostat != stat)
 219                 {
 220                         if (++count >= 3) return 1;
 221                         ostat = stat;
 222                 }
 223         }
 224
 225         /* Reset the camera and try again */
 226         parport_write_control(qcam->pport, 0xc);
 227         parport_write_control(qcam->pport, 0x8);
 228         mdelay(1);
 229         parport_write_control(qcam->pport, 0xc);
 230         mdelay(1);
 231         count = 0;
 232
 233         ostat = stat = parport_read_status(qcam->pport);
 234         for (i=0; i<250; i++)
 235         {
 236                 mdelay(1);
 237                 stat = parport_read_status(qcam->pport);
 238                 if (ostat != stat)
 239                 {
 240                         if (++count >= 3) return 1;
 241                         ostat = stat;
 242                 }
 243         }
 244
 245         /* no (or flatline) camera, give up */
 246         return 0;
 247 }
 248
 249 static void qc_reset(struct qcam_device *qcam)
 250 {
 251         parport_write_control(qcam->pport, 0xc);
 252         parport_write_control(qcam->pport, 0x8);
 253         mdelay(1);
 254         parport_write_control(qcam->pport, 0xc);
 255         mdelay(1);
 256 }
 257
 258 /* Reset the QuickCam and program for brightness, contrast,
 259  * white-balance, and resolution. */
 260
 261 static void qc_setup(struct qcam_device *q)
 262 {
 263         qc_reset(q);
 264
 265         /* Set the brightness.  */
 266         qcam_set(q, 11, q->brightness);
 267
 268         /* Set the height and width.  These refer to the actual
 269            CCD area *before* applying the selected decimation.  */
 270         qcam_set(q, 17, q->ccd_height);
 271         qcam_set(q, 19, q->ccd_width / 2);
 272
 273         /* Set top and left.  */
 274         qcam_set(q, 0xd, q->top);
 275         qcam_set(q, 0xf, q->left);
 276
 277         /* Set contrast and white balance.  */
 278         qcam_set(q, 0x19, q->contrast);
 279         qcam_set(q, 0x1f, q->whitebal);
 280
 281         /* Set the speed.  */
 282         qcam_set(q, 45, 2);
 283 }
 284
 285 /* Read some bytes from the camera and put them in the buffer.
 286    nbytes should be a multiple of 3, because bidirectional mode gives
 287    us three bytes at a time.  */
 288
 289 static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, unsigned int nbytes)
 290 {
 291         unsigned int bytes = 0;
 292
 293         qcam_set_ack(q, 0);
 294         if (q->bidirectional)
 295         {
 296                 /* It's a bidirectional port */
 297                 while (bytes < nbytes)
 298                 {
 299                         unsigned int lo1, hi1, lo2, hi2;
 300                         unsigned char r, g, b;
 301
 302                         if (qcam_await_ready2(q, 1)) return bytes;
 303                         lo1 = parport_read_data(q->pport) >> 1;
 304                         hi1 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
 305                         qcam_set_ack(q, 1);
 306                         if (qcam_await_ready2(q, 0)) return bytes;
 307                         lo2 = parport_read_data(q->pport) >> 1;
 308                         hi2 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
 309                         qcam_set_ack(q, 0);
 310                         r = (lo1 | ((hi1 & 1)<<7));
 311                         g = ((hi1 & 0x1e)<<3) | ((hi2 & 0x1e)>>1);
 312                         b = (lo2 | ((hi2 & 1)<<7));
 313                         if (force_rgb) {
 314                                 buf[bytes++] = r;
 315                                 buf[bytes++] = g;
 316                                 buf[bytes++] = b;
 317                         } else {
 318                                 buf[bytes++] = b;
 319                                 buf[bytes++] = g;
 320                                 buf[bytes++] = r;
 321                         }
 322                 }
 323         }
 324         else
 325         {
 326                 /* It's a unidirectional port */
 327                 int i = 0, n = bytes;
 328                 unsigned char rgb[3];
 329
 330                 while (bytes < nbytes)
 331                 {
 332                         unsigned int hi, lo;
 333
 334                         if (qcam_await_ready1(q, 1)) return bytes;
 335                         hi = (parport_read_status(q->pport) & 0xf0);
 336                         qcam_set_ack(q, 1);
 337                         if (qcam_await_ready1(q, 0)) return bytes;
 338                         lo = (parport_read_status(q->pport) & 0xf0);
 339                         qcam_set_ack(q, 0);
 340                         /* flip some bits */
 341                         rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
 342                         if (i >= 2) {
 343 get_fragment:
 344                                 if (force_rgb) {
 345                                         buf[n++] = rgb[0];
 346                                         buf[n++] = rgb[1];
 347                                         buf[n++] = rgb[2];
 348                                 } else {
 349                                         buf[n++] = rgb[2];
 350                                         buf[n++] = rgb[1];
 351                                         buf[n++] = rgb[0];
 352                                 }
 353                         }
 354                 }
 355                 if (i) {
 356                         i = 0;
 357                         goto get_fragment;
 358                 }
 359         }
 360         return bytes;
 361 }
 362
 363 #define BUFSZ   150
 364
 365 static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
 366 {
 367         unsigned lines, pixelsperline, bitsperxfer;
 368         unsigned int is_bi_dir = q->bidirectional;
 369         size_t wantlen, outptr = 0;
 370         char tmpbuf[BUFSZ];
 371
 372         if (!access_ok(VERIFY_WRITE, buf, len))
 373                 return -EFAULT;
 374
 375         /* Wait for camera to become ready */
 376         for (;;)
 377         {
 378                 int i = qcam_get(q, 41);
 379                 if (i == -1) {
 380                         qc_setup(q);
 381                         return -EIO;
 382                 }
 383                 if ((i & 0x80) == 0)
 384                         break;
 385                 else
 386                         schedule();
 387         }
 388
 389         if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1))
 390                 return -EIO;
 391
 392         lines = q->height;
 393         pixelsperline = q->width;
 394         bitsperxfer = (is_bi_dir) ? 24 : 8;
 395
 396         if (is_bi_dir)
 397         {
 398                 /* Turn the port around */
 399                 parport_data_reverse(q->pport);
 400                 mdelay(3);
 401                 qcam_set_ack(q, 0);
 402                 if (qcam_await_ready1(q, 1)) {
 403                         qc_setup(q);
 404                         return -EIO;
 405                 }
 406                 qcam_set_ack(q, 1);
 407                 if (qcam_await_ready1(q, 0)) {
 408                         qc_setup(q);
 409                         return -EIO;
 410                 }
 411         }
 412
 413         wantlen = lines * pixelsperline * 24 / 8;
 414
 415         while (wantlen)
 416         {
 417                 size_t t, s;
 418                 s = (wantlen > BUFSZ)?BUFSZ:wantlen;
 419                 t = qcam_read_bytes(q, tmpbuf, s);
 420                 if (outptr < len)
 421                 {
 422                         size_t sz = len - outptr;
 423                         if (sz > t) sz = t;
 424                         if (__copy_to_user(buf+outptr, tmpbuf, sz))
 425                                 break;
 426                         outptr += sz;
 427                 }
 428                 wantlen -= t;
 429                 if (t < s)
 430                         break;
 431                 cond_resched();
 432         }
 433
 434         len = outptr;
 435
 436         if (wantlen)
 437         {
 438                 printk("qcam: short read.\n");
 439                 if (is_bi_dir)
 440                         parport_data_forward(q->pport);
 441                 qc_setup(q);
 442                 return len;
 443         }
 444
 445         if (is_bi_dir)
 446         {
 447                 int l;
 448                 do {
 449                         l = qcam_read_bytes(q, tmpbuf, 3);
 450                         cond_resched();
 451                 } while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
 452                 if (force_rgb) {
 453                         if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
 454                                 printk("qcam: bad EOF\n");
 455                 } else {
 456                         if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
 457                                 printk("qcam: bad EOF\n");
 458                 }
 459                 qcam_set_ack(q, 0);
 460                 if (qcam_await_ready1(q, 1))
 461                 {
 462                         printk("qcam: no ack after EOF\n");
 463                         parport_data_forward(q->pport);
 464                         qc_setup(q);
 465                         return len;
 466                 }
 467                 parport_data_forward(q->pport);
 468                 mdelay(3);
 469                 qcam_set_ack(q, 1);
 470                 if (qcam_await_ready1(q, 0))
 471                 {
 472                         printk("qcam: no ack to port turnaround\n");
 473                         qc_setup(q);
 474                         return len;
 475                 }
 476         }
 477         else
 478         {
 479                 int l;
 480                 do {
 481                         l = qcam_read_bytes(q, tmpbuf, 1);
 482                         cond_resched();
 483                 } while (l && tmpbuf[0] == 0x7e);
 484                 l = qcam_read_bytes(q, tmpbuf+1, 2);
 485                 if (force_rgb) {
 486                         if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
 487                                 printk("qcam: bad EOF\n");
 488                 } else {
 489                         if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
 490                                 printk("qcam: bad EOF\n");
 491                 }
 492         }
 493
 494         qcam_write_data(q, 0);
 495         return len;
 496 }
 497
 498 /*
 499  *      Video4linux interfacing
 500  */
 501
 502 static int qcam_do_ioctl(struct inode *inode, struct file *file,
 503                          unsigned int cmd, void *arg)
 504 {
 505         struct video_device *dev = video_devdata(file);
 506         struct qcam_device *qcam=(struct qcam_device *)dev;
 507
 508         switch(cmd)
 509         {
 510                 case VIDIOCGCAP:
 511                 {
 512                         struct video_capability *b = arg;
 513                         strcpy(b->name, "Quickcam");
 514                         b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES;
 515                         b->channels = 1;
 516                         b->audios = 0;
 517                         b->maxwidth = 320;
 518                         b->maxheight = 240;
 519                         b->minwidth = 80;
 520                         b->minheight = 60;
 521                         return 0;
 522                 }
 523                 case VIDIOCGCHAN:
 524                 {
 525                         struct video_channel *v = arg;
 526                         if(v->channel!=0)
 527                                 return -EINVAL;
 528                         v->flags=0;
 529                         v->tuners=0;
 530                         /* Good question.. its composite or SVHS so.. */
 531                         v->type = VIDEO_TYPE_CAMERA;
 532                         strcpy(v->name, "Camera");
 533                         return 0;
 534                 }
 535                 case VIDIOCSCHAN:
 536                 {
 537                         struct video_channel *v = arg;
 538                         if(v->channel!=0)
 539                                 return -EINVAL;
 540                         return 0;
 541                 }
 542                 case VIDIOCGTUNER:
 543                 {
 544                         struct video_tuner *v = arg;
 545                         if(v->tuner)
 546                                 return -EINVAL;
 547                         memset(v,0,sizeof(*v));
 548                         strcpy(v->name, "Format");
 549                         v->mode = VIDEO_MODE_AUTO;
 550                         return 0;
 551                 }
 552                 case VIDIOCSTUNER:
 553                 {
 554                         struct video_tuner *v = arg;
 555                         if(v->tuner)
 556                                 return -EINVAL;
 557                         if(v->mode!=VIDEO_MODE_AUTO)
 558                                 return -EINVAL;
 559                         return 0;
 560                 }
 561                 case VIDIOCGPICT:
 562                 {
 563                         struct video_picture *p = arg;
 564                         p->colour=0x8000;
 565                         p->hue=0x8000;
 566                         p->brightness=qcam->brightness<<8;
 567                         p->contrast=qcam->contrast<<8;
 568                         p->whiteness=qcam->whitebal<<8;
 569                         p->depth=24;
 570                         p->palette=VIDEO_PALETTE_RGB24;
 571                         return 0;
 572                 }
 573                 case VIDIOCSPICT:
 574                 {
 575                         struct video_picture *p = arg;
 576
 577                         /*
 578                          *      Sanity check args
 579                          */
 580                         if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
 581                                 return -EINVAL;
 582
 583                         /*
 584                          *      Now load the camera.
 585                          */
 586                         qcam->brightness = p->brightness>>8;
 587                         qcam->contrast = p->contrast>>8;
 588                         qcam->whitebal = p->whiteness>>8;
 589
 590                         mutex_lock(&qcam->lock);
 591                         parport_claim_or_block(qcam->pdev);
 592                         qc_setup(qcam);
 593                         parport_release(qcam->pdev);
 594                         mutex_unlock(&qcam->lock);
 595                         return 0;
 596                 }
 597                 case VIDIOCSWIN:
 598                 {
 599                         struct video_window *vw = arg;
 600
 601                         if(vw->flags)
 602                                 return -EINVAL;
 603                         if(vw->clipcount)
 604                                 return -EINVAL;
 605                         if(vw->height<60||vw->height>240)
 606                                 return -EINVAL;
 607                         if(vw->width<80||vw->width>320)
 608                                 return -EINVAL;
 609
 610                         qcam->width = 80;
 611                         qcam->height = 60;
 612                         qcam->mode = QC_DECIMATION_4;
 613
 614                         if(vw->width>=160 && vw->height>=120)
 615                         {
 616                                 qcam->width = 160;
 617                                 qcam->height = 120;
 618                                 qcam->mode = QC_DECIMATION_2;
 619                         }
 620                         if(vw->width>=320 && vw->height>=240)
 621                         {
 622                                 qcam->width = 320;
 623                                 qcam->height = 240;
 624                                 qcam->mode = QC_DECIMATION_1;
 625                         }
 626                         qcam->mode |= QC_MILLIONS;
 627 #if 0
 628                         if(vw->width>=640 && vw->height>=480)
 629                         {
 630                                 qcam->width = 640;
 631                                 qcam->height = 480;
 632                                 qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
 633                         }
 634 #endif
 635                         /* Ok we figured out what to use from our
 636                            wide choice */
 637                         mutex_lock(&qcam->lock);
 638                         parport_claim_or_block(qcam->pdev);
 639                         qc_setup(qcam);
 640                         parport_release(qcam->pdev);
 641                         mutex_unlock(&qcam->lock);
 642                         return 0;
 643                 }
 644                 case VIDIOCGWIN:
 645                 {
 646                         struct video_window *vw = arg;
 647                         memset(vw, 0, sizeof(*vw));
 648                         vw->width=qcam->width;
 649                         vw->height=qcam->height;
 650                         return 0;
 651                 }
 652                 case VIDIOCKEY:
 653                         return 0;
 654                 case VIDIOCCAPTURE:
 655                 case VIDIOCGFBUF:
 656                 case VIDIOCSFBUF:
 657                 case VIDIOCGFREQ:
 658                 case VIDIOCSFREQ:
 659                 case VIDIOCGAUDIO:
 660                 case VIDIOCSAUDIO:
 661                         return -EINVAL;
 662                 default:
 663                         return -ENOIOCTLCMD;
 664         }
 665         return 0;
 666 }
 667
 668 static int qcam_ioctl(struct inode *inode, struct file *file,
 669                      unsigned int cmd, unsigned long arg)
 670 {
 671         return video_usercopy(inode, file, cmd, arg, qcam_do_ioctl);
 672 }
 673
 674 static ssize_t qcam_read(struct file *file, char __user *buf,
 675                          size_t count, loff_t *ppos)
 676 {
 677         struct video_device *v = video_devdata(file);
 678         struct qcam_device *qcam=(struct qcam_device *)v;
 679         int len;
 680
 681         mutex_lock(&qcam->lock);
 682         parport_claim_or_block(qcam->pdev);
 683         /* Probably should have a semaphore against multiple users */
 684         len = qc_capture(qcam, buf,count);
 685         parport_release(qcam->pdev);
 686         mutex_unlock(&qcam->lock);
 687         return len;
 688 }
 689
 690 /* video device template */
 691 static const struct file_operations qcam_fops = {
 692         .owner          = THIS_MODULE,
 693         .open           = video_exclusive_open,
 694         .release        = video_exclusive_release,
 695         .ioctl          = qcam_ioctl,
 696 #ifdef CONFIG_COMPAT
 697         .compat_ioctl   = v4l_compat_ioctl32,
 698 #endif
 699         .read           = qcam_read,
 700         .llseek         = no_llseek,
 701 };
 702
 703 static struct video_device qcam_template=
 704 {
 705         .name           = "Colour QuickCam",
 706         .fops           = &qcam_fops,
 707 };
 708
 709 /* Initialize the QuickCam driver control structure. */
 710
 711 static struct qcam_device *qcam_init(struct parport *port)
 712 {
 713         struct qcam_device *q;
 714
 715         q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
 716         if(q==NULL)
 717                 return NULL;
 718
 719         q->pport = port;
 720         q->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
 721                                           NULL, 0, NULL);
 722
 723         q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0;
 724
 725         if (q->pdev == NULL)
 726         {
 727                 printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
 728                        port->name);
 729                 kfree(q);
 730                 return NULL;
 731         }
 732
 733         memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
 734
 735         mutex_init(&q->lock);
 736         q->width = q->ccd_width = 320;
 737         q->height = q->ccd_height = 240;
 738         q->mode = QC_MILLIONS | QC_DECIMATION_1;
 739         q->contrast = 192;
 740         q->brightness = 240;
 741         q->whitebal = 128;
 742         q->top = 1;
 743         q->left = 14;
 744         return q;
 745 }
 746
 747 static struct qcam_device *qcams[MAX_CAMS];
 748 static unsigned int num_cams;
 749
 750 static int init_cqcam(struct parport *port)
 751 {
 752         struct qcam_device *qcam;
 753
 754         if (parport[0] != -1)
 755         {
 756                 /* The user gave specific instructions */
 757                 int i, found = 0;
 758                 for (i = 0; i < MAX_CAMS && parport[i] != -1; i++)
 759                 {
 760                         if (parport[0] == port->number)
 761                                 found = 1;
 762                 }
 763                 if (!found)
 764                         return -ENODEV;
 765         }
 766
 767         if (num_cams == MAX_CAMS)
 768                 return -ENOSPC;
 769
 770         qcam = qcam_init(port);
 771         if (qcam==NULL)
 772                 return -ENODEV;
 773
 774         parport_claim_or_block(qcam->pdev);
 775
 776         qc_reset(qcam);
 777
 778         if (probe && qc_detect(qcam)==0)
 779         {
 780                 parport_release(qcam->pdev);
 781                 parport_unregister_device(qcam->pdev);
 782                 kfree(qcam);
 783                 return -ENODEV;
 784         }
 785
 786         qc_setup(qcam);
 787
 788         parport_release(qcam->pdev);
 789
 790         if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 791                 printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
 792                        qcam->pport->name);
 793                 parport_unregister_device(qcam->pdev);
 794                 kfree(qcam);
 795                 return -ENODEV;
 796         }
 797
 798         printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
 799                qcam->vdev.minor, qcam->pport->name);
 800
 801         qcams[num_cams++] = qcam;
 802
 803         return 0;
 804 }
 805
 806 static void close_cqcam(struct qcam_device *qcam)
 807 {
 808         video_unregister_device(&qcam->vdev);
 809         parport_unregister_device(qcam->pdev);
 810         kfree(qcam);
 811 }
 812
 813 static void cq_attach(struct parport *port)
 814 {
 815         init_cqcam(port);
 816 }
 817
 818 static void cq_detach(struct parport *port)
 819 {
 820         /* Write this some day. */
 821 }
 822
 823 static struct parport_driver cqcam_driver = {
 824         .name = "cqcam",
 825         .attach = cq_attach,
 826         .detach = cq_detach,
 827 };
 828
 829 static int __init cqcam_init (void)
 830 {
 831         printk(BANNER "\n");
 832
 833         return parport_register_driver(&cqcam_driver);
 834 }
 835
 836 static void __exit cqcam_cleanup (void)
 837 {
 838         unsigned int i;
 839
 840         for (i = 0; i < num_cams; i++)
 841                 close_cqcam(qcams[i]);
 842
 843         parport_unregister_driver(&cqcam_driver);
 844 }
 845
 846 MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
 847 MODULE_DESCRIPTION(BANNER);
 848 MODULE_LICENSE("GPL");
 849
 850 /* FIXME: parport=auto would never have worked, surely? --RR */
 851 MODULE_PARM_DESC(parport ,"parport=<auto|n[,n]...> for port detection method\n\
 852 probe=<0|1|2> for camera detection method\n\
 853 force_rgb=<0|1> for RGB data format (default BGR)");
 854 module_param_array(parport, int, NULL, 0);
 855 module_param(probe, int, 0);
 856 module_param(force_rgb, bool, 0);
 857 module_param(video_nr, int, 0);
 858
 859 module_init(cqcam_init);
 860 module_exit(cqcam_cleanup);