5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/kmod.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/vmalloc.h>
35 #include <linux/firmware.h>
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
44 static void boot_msp34xx(struct bttv *btv, int pin);
45 static void boot_bt832(struct bttv *btv);
46 static void hauppauge_eeprom(struct bttv *btv);
47 static void avermedia_eeprom(struct bttv *btv);
48 static void osprey_eeprom(struct bttv *btv);
49 static void modtec_eeprom(struct bttv *btv);
50 static void init_PXC200(struct bttv *btv);
51 static void init_RTV24(struct bttv *btv);
53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_init(struct bttv *btv);
78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79 static void tibetCS16_init(struct bttv *btv);
81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82 static void kodicom4400r_init(struct bttv *btv);
84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
87 static int terratec_active_radio_upgrade(struct bttv *btv);
88 static int tea5757_read(struct bttv *btv);
89 static int tea5757_write(struct bttv *btv, int value);
90 static void identify_by_eeprom(struct bttv *btv,
91 unsigned char eeprom_data[256]);
92 static int __devinit pvr_boot(struct bttv *btv);
94 /* config variables */
95 static unsigned int triton1;
96 static unsigned int vsfx;
97 static unsigned int latency = UNSET;
100 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
107 static unsigned int autoload = 1;
109 static unsigned int autoload;
111 static unsigned int gpiomask = UNSET;
112 static unsigned int audioall = UNSET;
113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
116 module_param(triton1, int, 0444);
117 module_param(vsfx, int, 0444);
118 module_param(no_overlay, int, 0444);
119 module_param(latency, int, 0444);
120 module_param(gpiomask, int, 0444);
121 module_param(audioall, int, 0444);
122 module_param(autoload, int, 0444);
124 module_param_array(card, int, NULL, 0444);
125 module_param_array(pll, int, NULL, 0444);
126 module_param_array(tuner, int, NULL, 0444);
127 module_param_array(svhs, int, NULL, 0444);
128 module_param_array(remote, int, NULL, 0444);
129 module_param_array(audiomux, int, NULL, 0444);
131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132 "[enable bug compatibility for triton1 + others]");
133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134 "[yet another chipset flaw workaround]");
135 MODULE_PARM_DESC(latency,"pci latency timer");
136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
262 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
264 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
267 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
268 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
269 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
271 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
272 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
274 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
275 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
276 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
277 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
278 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
279 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
280 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
281 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
282 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
284 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
285 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
287 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
292 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
294 /* likely broken, vendor id doesn't match the other magic views ...
295 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
297 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
298 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
300 /* DVB cards (using pci function .1 for mpeg data xfer) */
301 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
302 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
303 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
304 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
305 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
306 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
307 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
308 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
309 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
310 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
311 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
312 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
317 /* ----------------------------------------------------------------------- */
318 /* array with description for bt848 / bt878 tv/grabber cards */
320 struct tvcard bttv_tvcards[] = {
321 /* ---- card 0x00 ---------------------------------- */
322 [BTTV_BOARD_UNKNOWN] = {
323 .name = " *** UNKNOWN/GENERIC *** ",
328 .muxsel = { 2, 3, 1, 0 },
330 .tuner_addr = ADDR_UNSET,
331 .radio_addr = ADDR_UNSET,
333 [BTTV_BOARD_MIRO] = {
340 .muxsel = { 2, 3, 1, 1 },
341 .gpiomux = { 2, 0, 0, 0 },
345 .tuner_addr = ADDR_UNSET,
346 .radio_addr = ADDR_UNSET,
348 [BTTV_BOARD_HAUPPAUGE] = {
349 .name = "Hauppauge (bt848)",
355 .muxsel = { 2, 3, 1, 1 },
356 .gpiomux = { 0, 1, 2, 3 },
360 .tuner_addr = ADDR_UNSET,
361 .radio_addr = ADDR_UNSET,
364 .name = "STB, Gateway P/N 6000699 (bt848)",
370 .muxsel = { 2, 3, 1, 1 },
371 .gpiomux = { 4, 0, 2, 3 },
375 .tuner_type = TUNER_PHILIPS_NTSC,
376 .tuner_addr = ADDR_UNSET,
377 .radio_addr = ADDR_UNSET,
382 /* ---- card 0x04 ---------------------------------- */
383 [BTTV_BOARD_INTEL] = {
384 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
390 .muxsel = { 2, 3, 1, 1 },
394 .tuner_addr = ADDR_UNSET,
395 .radio_addr = ADDR_UNSET,
397 [BTTV_BOARD_DIAMOND] = {
398 .name = "Diamond DTV2000",
404 .muxsel = { 2, 3, 1, 0 },
405 .gpiomux = { 0, 1, 0, 1 },
409 .tuner_addr = ADDR_UNSET,
410 .radio_addr = ADDR_UNSET,
412 [BTTV_BOARD_AVERMEDIA] = {
413 .name = "AVerMedia TVPhone",
418 .muxsel = { 2, 3, 1, 1 },
420 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
421 /* 0x04 for some cards ?? */
424 .tuner_addr = ADDR_UNSET,
425 .radio_addr = ADDR_UNSET,
426 .audio_hook = avermedia_tvphone_audio,
429 [BTTV_BOARD_MATRIX_VISION] = {
430 .name = "MATRIX-Vision MV-Delta",
436 .muxsel = { 2, 3, 1, 0, 0 },
440 .tuner_addr = ADDR_UNSET,
441 .radio_addr = ADDR_UNSET,
444 /* ---- card 0x08 ---------------------------------- */
445 [BTTV_BOARD_FLYVIDEO] = {
446 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
452 .muxsel = { 2, 3, 1, 1 },
453 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
458 .tuner_addr = ADDR_UNSET,
459 .radio_addr = ADDR_UNSET,
461 [BTTV_BOARD_TURBOTV] = {
462 .name = "IMS/IXmicro TurboTV",
468 .muxsel = { 2, 3, 1, 1 },
469 .gpiomux = { 1, 1, 2, 3 },
472 .tuner_type = TUNER_TEMIC_PAL,
473 .tuner_addr = ADDR_UNSET,
474 .radio_addr = ADDR_UNSET,
476 [BTTV_BOARD_HAUPPAUGE878] = {
477 .name = "Hauppauge (bt878)",
482 .gpiomask = 0x0f, /* old: 7 */
483 .muxsel = { 2, 0, 1, 1 },
484 .gpiomux = { 0, 1, 2, 3 },
489 .tuner_addr = ADDR_UNSET,
490 .radio_addr = ADDR_UNSET,
492 [BTTV_BOARD_MIROPRO] = {
493 .name = "MIRO PCTV pro",
499 .muxsel = { 2, 3, 1, 1 },
500 .gpiomux = { 0x20001,0x10001, 0, 0 },
504 .tuner_addr = ADDR_UNSET,
505 .radio_addr = ADDR_UNSET,
508 /* ---- card 0x0c ---------------------------------- */
509 [BTTV_BOARD_ADSTECH_TV] = {
510 .name = "ADS Technologies Channel Surfer TV (bt848)",
516 .muxsel = { 2, 3, 1, 1 },
517 .gpiomux = { 13, 14, 11, 7 },
520 .tuner_addr = ADDR_UNSET,
521 .radio_addr = ADDR_UNSET,
523 [BTTV_BOARD_AVERMEDIA98] = {
524 .name = "AVerMedia TVCapture 98",
530 .muxsel = { 2, 3, 1, 1 },
531 .gpiomux = { 13, 14, 11, 7 },
535 .tuner_type = TUNER_PHILIPS_PAL,
536 .tuner_addr = ADDR_UNSET,
537 .radio_addr = ADDR_UNSET,
538 .audio_hook = avermedia_tv_stereo_audio,
542 .name = "Aimslab Video Highway Xtreme (VHX)",
548 .muxsel = { 2, 3, 1, 1 },
549 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
554 .tuner_addr = ADDR_UNSET,
555 .radio_addr = ADDR_UNSET,
557 [BTTV_BOARD_ZOLTRIX] = {
558 .name = "Zoltrix TV-Max",
564 .muxsel = { 2, 3, 1, 1 },
565 .gpiomux = { 0, 0, 1, 0 },
569 .tuner_addr = ADDR_UNSET,
570 .radio_addr = ADDR_UNSET,
573 /* ---- card 0x10 ---------------------------------- */
574 [BTTV_BOARD_PIXVIEWPLAYTV] = {
575 .name = "Prolink Pixelview PlayTV (bt878)",
580 .gpiomask = 0x01fe00,
581 .muxsel = { 2, 3, 1, 1 },
582 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
583 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
584 .gpiomute = 0x002000,
589 [BTTV_BOARD_WINVIEW_601] = {
590 .name = "Leadtek WinView 601",
595 .gpiomask = 0x8300f8,
596 .muxsel = { 2, 3, 1, 1,0 },
597 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
598 .gpiomute = 0xcfa007,
601 .tuner_addr = ADDR_UNSET,
602 .radio_addr = ADDR_UNSET,
603 .audio_hook = winview_audio,
606 [BTTV_BOARD_AVEC_INTERCAP] = {
607 .name = "AVEC Intercapture",
613 .muxsel = { 2, 3, 1, 1 },
614 .gpiomux = { 1, 0, 0, 0 },
617 .tuner_addr = ADDR_UNSET,
618 .radio_addr = ADDR_UNSET,
620 [BTTV_BOARD_LIFE_FLYKIT] = {
621 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
626 .gpiomask = 0x8dff00,
627 .muxsel = { 2, 3, 1, 1 },
631 .tuner_addr = ADDR_UNSET,
632 .radio_addr = ADDR_UNSET,
635 /* ---- card 0x14 ---------------------------------- */
636 [BTTV_BOARD_CEI_RAFFLES] = {
637 .name = "CEI Raffles Card",
642 .muxsel = { 2, 3, 1, 1 },
644 .tuner_addr = ADDR_UNSET,
645 .radio_addr = ADDR_UNSET,
647 [BTTV_BOARD_CONFERENCETV] = {
648 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
650 .audio_inputs = 2, /* tuner, line in */
654 .muxsel = { 2, 3, 1, 1 },
655 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
658 .tuner_type = TUNER_PHILIPS_PAL_I,
659 .tuner_addr = ADDR_UNSET,
660 .radio_addr = ADDR_UNSET,
662 [BTTV_BOARD_PHOEBE_TVMAS] = {
663 .name = "Askey CPH050/ Phoebe Tv Master + FM",
669 .muxsel = { 2, 3, 1, 1 },
670 .gpiomux = { 0, 1, 0x800, 0x400 },
675 .tuner_addr = ADDR_UNSET,
676 .radio_addr = ADDR_UNSET,
678 [BTTV_BOARD_MODTEC_205] = {
679 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
685 .muxsel = { 2, 3, -1 },
686 .digital_mode = DIGITAL_MODE_CAMERA,
687 .gpiomux = { 0, 0, 0, 0 },
690 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
691 .tuner_addr = ADDR_UNSET,
692 .radio_addr = ADDR_UNSET,
695 /* ---- card 0x18 ---------------------------------- */
696 [BTTV_BOARD_MAGICTVIEW061] = {
697 .name = "Askey CPH05X/06X (bt878) [many vendors]",
703 .muxsel = { 2, 3, 1, 1 },
704 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
709 .tuner_addr = ADDR_UNSET,
710 .radio_addr = ADDR_UNSET,
713 [BTTV_BOARD_VOBIS_BOOSTAR] = {
714 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
719 .gpiomask = 0x1f0fff,
720 .muxsel = { 2, 3, 1, 1 },
721 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
724 .tuner_type = TUNER_PHILIPS_PAL,
725 .tuner_addr = ADDR_UNSET,
726 .radio_addr = ADDR_UNSET,
727 .audio_hook = terratv_audio,
729 [BTTV_BOARD_HAUPPAUG_WCAM] = {
730 .name = "Hauppauge WinCam newer (bt878)",
736 .muxsel = { 2, 0, 1, 1 },
737 .gpiomux = { 0, 1, 2, 3 },
741 .tuner_addr = ADDR_UNSET,
742 .radio_addr = ADDR_UNSET,
744 [BTTV_BOARD_MAXI] = {
745 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
751 .muxsel = { 2, 3, 1, 1 },
752 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
755 .tuner_type = TUNER_PHILIPS_SECAM,
756 .tuner_addr = ADDR_UNSET,
757 .radio_addr = ADDR_UNSET,
760 /* ---- card 0x1c ---------------------------------- */
761 [BTTV_BOARD_TERRATV] = {
762 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
767 .gpiomask = 0x1f0fff,
768 .muxsel = { 2, 3, 1, 1 },
769 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
772 .tuner_type = TUNER_PHILIPS_PAL,
773 .tuner_addr = ADDR_UNSET,
774 .radio_addr = ADDR_UNSET,
775 .audio_hook = terratv_audio,
777 External 20 pin connector (for Active Radio Upgrade board)
783 gpio05: om5610-stereo
787 gpio09+10: nIOR, nSEL ?? (bt878)
791 gpio16: u2-A0 (1st 4052bt)
794 gpio19: u4-A0 (2nd 4052)
798 00000 : Cdrom (internal audio input)
799 10000 : ext. Video audio input
808 [BTTV_BOARD_PXC200] = {
809 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
810 .name = "Imagenation PXC200",
814 .svhs = 1, /* was: 4 */
816 .muxsel = { 2, 3, 1, 0, 0},
820 .tuner_addr = ADDR_UNSET,
821 .radio_addr = ADDR_UNSET,
822 .muxsel_hook = PXC200_muxsel,
825 [BTTV_BOARD_FLYVIDEO_98] = {
826 .name = "Lifeview FlyVideo 98 LR50",
831 .gpiomask = 0x1800, /* 0x8dfe00 */
832 .muxsel = { 2, 3, 1, 1 },
833 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
837 .tuner_addr = ADDR_UNSET,
838 .radio_addr = ADDR_UNSET,
840 [BTTV_BOARD_IPROTV] = {
841 .name = "Formac iProTV, Formac ProTV I (bt848)",
847 .muxsel = { 2, 3, 1, 1 },
848 .gpiomux = { 1, 0, 0, 0 },
850 .tuner_type = TUNER_PHILIPS_PAL,
851 .tuner_addr = ADDR_UNSET,
852 .radio_addr = ADDR_UNSET,
855 /* ---- card 0x20 ---------------------------------- */
856 [BTTV_BOARD_INTEL_C_S_PCI] = {
857 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
863 .muxsel = { 2, 3, 1, 1 },
867 .tuner_addr = ADDR_UNSET,
868 .radio_addr = ADDR_UNSET,
870 [BTTV_BOARD_TERRATVALUE] = {
871 .name = "Terratec TerraTValue Version Bt878",
876 .gpiomask = 0xffff00,
877 .muxsel = { 2, 3, 1, 1 },
878 .gpiomux = { 0x500, 0, 0x300, 0x900 },
882 .tuner_type = TUNER_PHILIPS_PAL,
883 .tuner_addr = ADDR_UNSET,
884 .radio_addr = ADDR_UNSET,
886 [BTTV_BOARD_WINFAST2000] = {
887 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
892 .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
893 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
894 .gpiomask = 0xb33000,
895 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
896 .gpiomute = 0x800000,
897 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
898 gpio23 -- hef4052:nEnable (0x800000)
901 0x0000: external audio
905 Note: There exists another variant "Winfast 2000" with tv stereo !?
906 Note: eeprom only contains FF and pci subsystem id 107d:6606
911 .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
912 .tuner_addr = ADDR_UNSET,
913 .radio_addr = ADDR_UNSET,
914 .audio_hook = winfast2000_audio,
917 [BTTV_BOARD_CHRONOS_VS2] = {
918 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
924 .muxsel = { 2, 3, 1, 1 },
925 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
929 .tuner_addr = ADDR_UNSET,
930 .radio_addr = ADDR_UNSET,
933 /* ---- card 0x24 ---------------------------------- */
934 [BTTV_BOARD_TYPHOON_TVIEW] = {
935 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
941 .muxsel = { 2, 3, 1, 1 },
942 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
946 .tuner_addr = ADDR_UNSET,
947 .radio_addr = ADDR_UNSET,
950 [BTTV_BOARD_PXELVWPLTVPRO] = {
951 .name = "Prolink PixelView PlayTV pro",
957 .muxsel = { 2, 3, 1, 1 },
958 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
963 .tuner_addr = ADDR_UNSET,
964 .radio_addr = ADDR_UNSET,
966 [BTTV_BOARD_MAGICTVIEW063] = {
967 .name = "Askey CPH06X TView99",
972 .gpiomask = 0x551e00,
973 .muxsel = { 2, 3, 1, 0 },
974 .gpiomux = { 0x551400, 0x551200, 0, 0 },
975 .gpiomute = 0x551c00,
979 .tuner_addr = ADDR_UNSET,
980 .radio_addr = ADDR_UNSET,
983 [BTTV_BOARD_PINNACLE] = {
984 .name = "Pinnacle PCTV Studio/Rave",
989 .gpiomask = 0x03000F,
990 .muxsel = { 2, 3, 1, 1 },
991 .gpiomux = { 2, 0xd0001, 0, 0 },
996 .tuner_addr = ADDR_UNSET,
997 .radio_addr = ADDR_UNSET,
1000 /* ---- card 0x28 ---------------------------------- */
1001 [BTTV_BOARD_STB2] = {
1002 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1008 .muxsel = { 2, 3, 1, 1 },
1009 .gpiomux = { 4, 0, 2, 3 },
1013 .tuner_type = TUNER_PHILIPS_NTSC,
1014 .tuner_addr = ADDR_UNSET,
1015 .radio_addr = ADDR_UNSET,
1019 [BTTV_BOARD_AVPHONE98] = {
1020 .name = "AVerMedia TVPhone 98",
1026 .muxsel = { 2, 3, 1, 1 },
1027 .gpiomux = { 13, 4, 11, 7 },
1031 .tuner_addr = ADDR_UNSET,
1032 .radio_addr = ADDR_UNSET,
1034 .audio_hook = avermedia_tvphone_audio,
1036 [BTTV_BOARD_PV951] = {
1037 .name = "ProVideo PV951", /* pic16c54 */
1043 .muxsel = { 2, 3, 1, 1},
1044 .gpiomux = { 0, 0, 0, 0},
1049 .tuner_addr = ADDR_UNSET,
1050 .radio_addr = ADDR_UNSET,
1052 [BTTV_BOARD_ONAIR_TV] = {
1053 .name = "Little OnAir TV",
1059 .muxsel = { 2, 3, 1, 1 },
1060 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1061 .gpiomute = 0xff3ffc,
1064 .tuner_addr = ADDR_UNSET,
1065 .radio_addr = ADDR_UNSET,
1068 /* ---- card 0x2c ---------------------------------- */
1069 [BTTV_BOARD_SIGMA_TVII_FM] = {
1070 .name = "Sigma TVII-FM",
1076 .muxsel = { 2, 3, 1, 1 },
1077 .gpiomux = { 1, 1, 0, 2 },
1082 .tuner_addr = ADDR_UNSET,
1083 .radio_addr = ADDR_UNSET,
1085 [BTTV_BOARD_MATRIX_VISION2] = {
1086 .name = "MATRIX-Vision MV-Delta 2",
1092 .muxsel = { 2, 3, 1, 0, 0 },
1097 .tuner_addr = ADDR_UNSET,
1098 .radio_addr = ADDR_UNSET,
1100 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1101 .name = "Zoltrix Genie TV/FM",
1106 .gpiomask = 0xbcf03f,
1107 .muxsel = { 2, 3, 1, 1 },
1108 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1109 .gpiomute = 0xbcb03f,
1113 .tuner_addr = ADDR_UNSET,
1114 .radio_addr = ADDR_UNSET,
1116 [BTTV_BOARD_TERRATVRADIO] = {
1117 .name = "Terratec TV/Radio+",
1122 .gpiomask = 0x70000,
1123 .muxsel = { 2, 3, 1, 1 },
1124 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1125 .gpiomute = 0x40000,
1130 .tuner_addr = ADDR_UNSET,
1131 .radio_addr = ADDR_UNSET,
1135 /* ---- card 0x30 ---------------------------------- */
1136 [BTTV_BOARD_DYNALINK] = {
1137 .name = "Askey CPH03x/ Dynalink Magic TView",
1143 .muxsel = { 2, 3, 1, 1 },
1144 .gpiomux = {2,0,0,0 },
1149 .tuner_addr = ADDR_UNSET,
1150 .radio_addr = ADDR_UNSET,
1152 [BTTV_BOARD_GVBCTV3PCI] = {
1153 .name = "IODATA GV-BCTV3/PCI",
1158 .gpiomask = 0x010f00,
1159 .muxsel = {2, 3, 0, 0 },
1160 .gpiomux = {0x10000, 0, 0x10000, 0 },
1163 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1164 .tuner_addr = ADDR_UNSET,
1165 .radio_addr = ADDR_UNSET,
1166 .audio_hook = gvbctv3pci_audio,
1168 [BTTV_BOARD_PXELVWPLTVPAK] = {
1169 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1174 .gpiomask = 0xAA0000,
1175 .muxsel = { 2,3,1,1,-1 },
1176 .digital_mode = DIGITAL_MODE_CAMERA,
1177 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1178 .gpiomute = 0xa8000,
1181 .tuner_type = TUNER_PHILIPS_PAL_I,
1182 .tuner_addr = ADDR_UNSET,
1183 .radio_addr = ADDR_UNSET,
1185 /* GPIO wiring: (different from Rev.4C !)
1186 GPIO17: U4.A0 (first hef4052bt)
1188 GPIO20: U5.A1 (second hef4052bt)
1190 GPIO22: BT832 Reset Line
1191 GPIO23: A5,A0, U5,nEN
1192 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1195 [BTTV_BOARD_EAGLE] = {
1196 .name = "Eagle Wireless Capricorn2 (bt878A)",
1202 .muxsel = { 2, 0, 1, 1 },
1203 .gpiomux = { 0, 1, 2, 3 },
1206 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1207 .tuner_addr = ADDR_UNSET,
1208 .radio_addr = ADDR_UNSET,
1211 /* ---- card 0x34 ---------------------------------- */
1212 [BTTV_BOARD_PINNACLEPRO] = {
1213 /* David Härdeman <david@2gen.com> */
1214 .name = "Pinnacle PCTV Studio Pro",
1219 .gpiomask = 0x03000F,
1220 .muxsel = { 2, 3, 1, 1 },
1221 .gpiomux = { 1, 0xd0001, 0, 0 },
1223 /* sound path (5 sources):
1224 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1227 2= Mono TV sound from Tuner
1229 MUX2 (mask 0x30000):
1231 1= FM stereo Radio from Tuner */
1235 .tuner_addr = ADDR_UNSET,
1236 .radio_addr = ADDR_UNSET,
1238 [BTTV_BOARD_TVIEW_RDS_FM] = {
1239 /* Claas Langbehn <claas@bigfoot.com>,
1240 Sven Grothklags <sven@upb.de> */
1241 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1247 .muxsel = { 2, 3, 1, 1 },
1248 .gpiomux = { 0, 0, 0x10, 8 },
1252 .tuner_type = TUNER_PHILIPS_PAL,
1253 .tuner_addr = ADDR_UNSET,
1254 .radio_addr = ADDR_UNSET,
1257 [BTTV_BOARD_LIFETEC_9415] = {
1258 /* Tim Röstermundt <rosterm@uni-muenster.de>
1259 in de.comp.os.unix.linux.hardware:
1260 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1261 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1262 options tuner type=5 */
1263 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1269 .muxsel = { 2, 3, 1, 1 },
1270 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1272 /* For cards with tda9820/tda9821:
1273 0x0000: Tuner normal stereo
1274 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1275 0x0880: Tuner A2 stereo */
1278 .tuner_addr = ADDR_UNSET,
1279 .radio_addr = ADDR_UNSET,
1281 [BTTV_BOARD_BESTBUY_EASYTV] = {
1282 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1283 old Easy TV BT848 version (model CPH031) */
1284 .name = "Askey CPH031/ BESTBUY Easy TV",
1290 .muxsel = { 2, 3, 1, 0 },
1291 .gpiomux = { 2, 0, 0, 0 },
1295 .tuner_type = TUNER_TEMIC_PAL,
1296 .tuner_addr = ADDR_UNSET,
1297 .radio_addr = ADDR_UNSET,
1300 /* ---- card 0x38 ---------------------------------- */
1301 [BTTV_BOARD_FLYVIDEO_98FM] = {
1302 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1303 .name = "Lifeview FlyVideo 98FM LR50",
1309 .muxsel = { 2, 3, 1, 1 },
1310 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1314 .tuner_addr = ADDR_UNSET,
1315 .radio_addr = ADDR_UNSET,
1317 /* This is the ultimate cheapo capture card
1318 * just a BT848A on a small PCB!
1319 * Steve Hosgood <steve@equiinet.com> */
1320 [BTTV_BOARD_GRANDTEC] = {
1321 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1333 .tuner_addr = ADDR_UNSET,
1334 .radio_addr = ADDR_UNSET,
1336 [BTTV_BOARD_ASKEY_CPH060] = {
1337 /* Daniel Herrington <daniel.herrington@home.com> */
1338 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1344 .muxsel = { 2, 3, 1, 1},
1345 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1349 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1350 .tuner_addr = ADDR_UNSET,
1351 .radio_addr = ADDR_UNSET,
1353 [BTTV_BOARD_ASKEY_CPH03X] = {
1354 /* Matti Mottus <mottus@physic.ut.ee> */
1355 .name = "Askey CPH03x TV Capturer",
1360 .gpiomask = 0x03000F,
1361 .muxsel = { 2, 3, 1, 0 },
1362 .gpiomux = { 2, 0, 0, 0 },
1366 .tuner_addr = ADDR_UNSET,
1367 .radio_addr = ADDR_UNSET,
1370 /* ---- card 0x3c ---------------------------------- */
1371 [BTTV_BOARD_MM100PCTV] = {
1372 /* Philip Blundell <philb@gnu.org> */
1373 .name = "Modular Technology MM100PCTV",
1379 .muxsel = { 2, 3, 1, 1 },
1380 .gpiomux = { 2, 0, 0, 1 },
1383 .tuner_type = TUNER_TEMIC_PAL,
1384 .tuner_addr = ADDR_UNSET,
1385 .radio_addr = ADDR_UNSET,
1387 [BTTV_BOARD_GMV1] = {
1388 /* Adrian Cox <adrian@humboldt.co.uk */
1389 .name = "AG Electronics GMV1",
1401 .tuner_addr = ADDR_UNSET,
1402 .radio_addr = ADDR_UNSET,
1404 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1405 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1406 new Easy TV BT878 version (model CPH061)
1407 special thanks to Informatica Mieres for providing the card */
1408 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1414 .muxsel = { 2, 3, 1, 0 },
1415 .gpiomux = { 1, 0, 4, 4 },
1419 .tuner_type = TUNER_PHILIPS_PAL,
1420 .tuner_addr = ADDR_UNSET,
1421 .radio_addr = ADDR_UNSET,
1423 [BTTV_BOARD_ATI_TVWONDER] = {
1424 /* Lukas Gebauer <geby@volny.cz> */
1425 .name = "ATI TV-Wonder",
1431 .muxsel = { 2, 3, 1, 0 },
1432 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1435 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1436 .tuner_addr = ADDR_UNSET,
1437 .radio_addr = ADDR_UNSET,
1440 /* ---- card 0x40 ---------------------------------- */
1441 [BTTV_BOARD_ATI_TVWONDERVE] = {
1442 /* Lukas Gebauer <geby@volny.cz> */
1443 .name = "ATI TV-Wonder VE",
1449 .muxsel = { 2, 3, 0, 1 },
1450 .gpiomux = { 0, 0, 1, 0 },
1453 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1454 .tuner_addr = ADDR_UNSET,
1455 .radio_addr = ADDR_UNSET,
1457 [BTTV_BOARD_FLYVIDEO2000] = {
1458 /* DeeJay <deejay@westel900.net (2000S) */
1459 .name = "Lifeview FlyVideo 2000S LR90",
1465 .muxsel = { 2, 3, 0, 1 },
1466 /* Radio changed from 1e80 to 0x800 to make
1467 FlyVideo2000S in .hu happy (gm)*/
1468 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1469 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1471 .audio_hook = fv2000s_audio,
1477 .tuner_addr = ADDR_UNSET,
1478 .radio_addr = ADDR_UNSET,
1480 [BTTV_BOARD_TERRATVALUER] = {
1481 .name = "Terratec TValueRadio",
1486 .gpiomask = 0xffff00,
1487 .muxsel = { 2, 3, 1, 1 },
1488 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1492 .tuner_type = TUNER_PHILIPS_PAL,
1493 .tuner_addr = ADDR_UNSET,
1494 .radio_addr = ADDR_UNSET,
1497 [BTTV_BOARD_GVBCTV4PCI] = {
1498 /* TANAKA Kei <peg00625@nifty.com> */
1499 .name = "IODATA GV-BCTV4/PCI",
1504 .gpiomask = 0x010f00,
1505 .muxsel = {2, 3, 0, 0 },
1506 .gpiomux = {0x10000, 0, 0x10000, 0 },
1509 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1510 .tuner_addr = ADDR_UNSET,
1511 .radio_addr = ADDR_UNSET,
1512 .audio_hook = gvbctv3pci_audio,
1515 /* ---- card 0x44 ---------------------------------- */
1516 [BTTV_BOARD_VOODOOTV_FM] = {
1517 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1518 /* try "insmod msp3400 simple=0" if you have
1519 * sound problems with this card. */
1524 .gpiomask = 0x4f8a00,
1525 /* 0x100000: 1=MSP enabled (0=disable again)
1526 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1527 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1528 .gpiomute = 0x947fff,
1529 /* tvtuner, radio, external,internal, mute, stereo
1530 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1531 .muxsel = { 2, 3 ,0 ,1 },
1532 .tuner_type = TUNER_MT2032,
1533 .tuner_addr = ADDR_UNSET,
1534 .radio_addr = ADDR_UNSET,
1538 [BTTV_BOARD_AIMMS] = {
1539 /* Philip Blundell <pb@nexus.co.uk> */
1540 .name = "Active Imaging AIMMS",
1545 .tuner_addr = ADDR_UNSET,
1546 .radio_addr = ADDR_UNSET,
1551 [BTTV_BOARD_PV_BT878P_PLUS] = {
1552 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1553 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1559 .muxsel = { 2, 3, 1, 1 },
1560 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1565 .tuner_addr = ADDR_UNSET,
1566 .radio_addr = ADDR_UNSET,
1569 GPIO0: U4.A0 (hef4052bt)
1571 GPIO2: U4.A1 (second hef4052bt)
1572 GPIO3: U4.nEN, U5.A0, A5.nEN
1576 [BTTV_BOARD_FLYVIDEO98EZ] = {
1577 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1582 .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1585 .tuner_type = UNSET,
1586 .tuner_addr = ADDR_UNSET,
1587 .radio_addr = ADDR_UNSET,
1590 /* ---- card 0x48 ---------------------------------- */
1591 [BTTV_BOARD_PV_BT878P_9B] = {
1592 /* Dariusz Kowalewski <darekk@automex.pl> */
1593 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1599 .muxsel = { 2, 3, 1, 1 },
1600 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1607 .tuner_addr = ADDR_UNSET,
1608 .radio_addr = ADDR_UNSET,
1609 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1610 .has_radio = 1, /* Note: not all cards have radio */
1617 GPIO20,22,23: R30,R29,R28
1620 [BTTV_BOARD_SENSORAY311] = {
1621 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1622 /* you must jumper JP5 for the card to work */
1623 .name = "Sensoray 311",
1629 .muxsel = { 2, 3, 1, 0, 0 },
1633 .tuner_addr = ADDR_UNSET,
1634 .radio_addr = ADDR_UNSET,
1636 [BTTV_BOARD_RV605] = {
1637 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1638 .name = "RemoteVision MX (RV605)",
1644 .gpiomask2 = 0x07ff,
1645 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1646 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1650 .tuner_addr = ADDR_UNSET,
1651 .radio_addr = ADDR_UNSET,
1652 .muxsel_hook = rv605_muxsel,
1654 [BTTV_BOARD_POWERCLR_MTV878] = {
1655 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1660 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1661 .muxsel = { 2, 1, 1, },
1662 .gpiomux = { 0, 1, 2, 2 },
1665 .tuner_type = TUNER_PHILIPS_PAL,
1666 .tuner_addr = ADDR_UNSET,
1667 .radio_addr = ADDR_UNSET,
1672 /* ---- card 0x4c ---------------------------------- */
1673 [BTTV_BOARD_WINDVR] = {
1674 /* Masaki Suzuki <masaki@btree.org> */
1675 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1680 .gpiomask = 0x140007,
1681 .muxsel = { 2, 3, 1, 1 },
1682 .gpiomux = { 0, 1, 2, 3 },
1684 .tuner_type = TUNER_PHILIPS_NTSC,
1685 .tuner_addr = ADDR_UNSET,
1686 .radio_addr = ADDR_UNSET,
1687 .audio_hook = windvr_audio,
1689 [BTTV_BOARD_GRANDTEC_MULTI] = {
1690 .name = "GrandTec Multi Capture Card (Bt878)",
1696 .muxsel = { 2, 3, 1, 0 },
1702 .tuner_addr = ADDR_UNSET,
1703 .radio_addr = ADDR_UNSET,
1705 [BTTV_BOARD_KWORLD] = {
1706 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1712 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1713 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1714 * This card lacks external Audio In, so we mute it on Ext. & Int.
1715 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1716 * This card lacks PCI subsystem ID, sigh.
1717 * gpiomux =1: lower volume, 2+3: mute
1718 * btwincap uses 0x80000/0x80003
1725 .tuner_addr = ADDR_UNSET,
1726 .radio_addr = ADDR_UNSET,
1727 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1728 radio signal strength indicators work fine. */
1731 GPIO0,1: HEF4052 A0,A1
1732 GPIO2: HEF4052 nENABLE
1734 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1738 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1740 [BTTV_BOARD_DSP_TCVIDEO] = {
1741 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1742 .name = "DSP Design TCVIDEO",
1745 .muxsel = { 2, 3, 1, 0 },
1748 .tuner_addr = ADDR_UNSET,
1749 .radio_addr = ADDR_UNSET,
1752 /* ---- card 0x50 ---------------------------------- */
1753 [BTTV_BOARD_HAUPPAUGEPVR] = {
1754 .name = "Hauppauge WinTV PVR",
1759 .muxsel = { 2, 0, 1, 1 },
1763 .tuner_addr = ADDR_UNSET,
1764 .radio_addr = ADDR_UNSET,
1769 [BTTV_BOARD_GVBCTV5PCI] = {
1770 .name = "IODATA GV-BCTV5/PCI",
1775 .gpiomask = 0x0f0f80,
1776 .muxsel = {2, 3, 1, 0 },
1777 .gpiomux = {0x030000, 0x010000, 0, 0 },
1778 .gpiomute = 0x020000,
1781 .tuner_type = TUNER_PHILIPS_NTSC_M,
1782 .tuner_addr = ADDR_UNSET,
1783 .radio_addr = ADDR_UNSET,
1784 .audio_hook = gvbctv5pci_audio,
1787 [BTTV_BOARD_OSPREY1x0] = {
1788 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1789 .video_inputs = 4, /* id-inputs-clock */
1793 .muxsel = { 3, 2, 0, 1 },
1796 .tuner_addr = ADDR_UNSET,
1797 .radio_addr = ADDR_UNSET,
1802 [BTTV_BOARD_OSPREY1x0_848] = {
1803 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1808 .muxsel = { 2, 3, 1 },
1811 .tuner_addr = ADDR_UNSET,
1812 .radio_addr = ADDR_UNSET,
1818 /* ---- card 0x54 ---------------------------------- */
1819 [BTTV_BOARD_OSPREY101_848] = {
1820 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1828 .tuner_addr = ADDR_UNSET,
1829 .radio_addr = ADDR_UNSET,
1834 [BTTV_BOARD_OSPREY1x1] = {
1835 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1843 .tuner_addr = ADDR_UNSET,
1844 .radio_addr = ADDR_UNSET,
1849 [BTTV_BOARD_OSPREY1x1_SVID] = {
1850 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1858 .tuner_addr = ADDR_UNSET,
1859 .radio_addr = ADDR_UNSET,
1864 [BTTV_BOARD_OSPREY2xx] = {
1865 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1872 .tuner_type = UNSET,
1873 .tuner_addr = ADDR_UNSET,
1874 .radio_addr = ADDR_UNSET,
1880 /* ---- card 0x58 ---------------------------------- */
1881 [BTTV_BOARD_OSPREY2x0_SVID] = {
1882 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1889 .tuner_type = UNSET,
1890 .tuner_addr = ADDR_UNSET,
1891 .radio_addr = ADDR_UNSET,
1896 [BTTV_BOARD_OSPREY2x0] = {
1897 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1904 .tuner_type = UNSET,
1905 .tuner_addr = ADDR_UNSET,
1906 .radio_addr = ADDR_UNSET,
1911 [BTTV_BOARD_OSPREY500] = {
1912 .name = "Osprey 500", /* 500 */
1920 .tuner_addr = ADDR_UNSET,
1921 .radio_addr = ADDR_UNSET,
1926 [BTTV_BOARD_OSPREY540] = {
1927 .name = "Osprey 540", /* 540 */
1933 .tuner_addr = ADDR_UNSET,
1934 .radio_addr = ADDR_UNSET,
1940 /* ---- card 0x5C ---------------------------------- */
1941 [BTTV_BOARD_OSPREY2000] = {
1942 .name = "Osprey 2000", /* 2000 */
1949 .tuner_type = UNSET,
1950 .tuner_addr = ADDR_UNSET,
1951 .radio_addr = ADDR_UNSET,
1954 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1956 [BTTV_BOARD_IDS_EAGLE] = {
1957 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1958 .name = "IDS Eagle",
1963 .tuner_addr = ADDR_UNSET,
1964 .radio_addr = ADDR_UNSET,
1967 .muxsel = { 0, 1, 2, 3 },
1968 .muxsel_hook = eagle_muxsel,
1973 [BTTV_BOARD_PINNACLESAT] = {
1974 .name = "Pinnacle PCTV Sat",
1980 .tuner_addr = ADDR_UNSET,
1981 .radio_addr = ADDR_UNSET,
1990 [BTTV_BOARD_FORMAC_PROTV] = {
1991 .name = "Formac ProTV II (bt878)",
1997 /* TV, Comp1, Composite over SVID con, SVID */
1998 .muxsel = { 2, 3, 1, 1 },
1999 .gpiomux = { 2, 2, 0, 0 },
2002 .tuner_type = TUNER_PHILIPS_PAL,
2003 .tuner_addr = ADDR_UNSET,
2004 .radio_addr = ADDR_UNSET,
2006 GPIO=0x00,0x01,0x03: mute (?)
2007 0x02: both TV and radio (tuner: FM1216/I)
2008 The card has onboard audio connectors labeled "cdrom" and "board",
2009 not soldered here, though unknown wiring.
2010 Card lacks: external audio in, pci subsystem id.
2014 /* ---- card 0x60 ---------------------------------- */
2015 [BTTV_BOARD_MACHTV] = {
2022 .muxsel = { 2, 3, 1, 1},
2023 .gpiomux = { 0, 1, 2, 3},
2027 .tuner_addr = ADDR_UNSET,
2028 .radio_addr = ADDR_UNSET,
2031 [BTTV_BOARD_EURESYS_PICOLO] = {
2032 .name = "Euresys Picolo",
2041 .muxsel = { 2, 0, 1},
2043 .tuner_type = UNSET,
2044 .tuner_addr = ADDR_UNSET,
2045 .radio_addr = ADDR_UNSET,
2047 [BTTV_BOARD_PV150] = {
2048 /* Luc Van Hoeylandt <luc@e-magic.be> */
2049 .name = "ProVideo PV150", /* 0x4f */
2060 .tuner_type = UNSET,
2061 .tuner_addr = ADDR_UNSET,
2062 .radio_addr = ADDR_UNSET,
2064 [BTTV_BOARD_AD_TVK503] = {
2065 /* Hiroshi Takekawa <sian@big.or.jp> */
2066 /* This card lacks subsystem ID */
2067 .name = "AD-TVK503", /* 0x63 */
2072 .gpiomask = 0x001e8007,
2073 .muxsel = { 2, 3, 1, 0 },
2074 /* Tuner, Radio, external, internal, off, on */
2075 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
2081 .tuner_addr = ADDR_UNSET,
2082 .radio_addr = ADDR_UNSET,
2083 .audio_hook = adtvk503_audio,
2086 /* ---- card 0x64 ---------------------------------- */
2087 [BTTV_BOARD_HERCULES_SM_TV] = {
2088 .name = "Hercules Smart TV Stereo",
2094 .muxsel = { 2, 3, 1, 1 },
2099 .tuner_addr = ADDR_UNSET,
2100 .radio_addr = ADDR_UNSET,
2102 - card lacks subsystem ID
2103 - stereo variant w/ daughter board with tda9874a @0xb0
2105 always from tda9874 independent of GPIO (?)
2106 external line in: unknown
2107 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2108 hef4053 (instead 4052) for unknown function
2111 [BTTV_BOARD_PACETV] = {
2112 .name = "Pace TV & Radio Card",
2117 .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2122 .tuner_addr = ADDR_UNSET,
2123 .radio_addr = ADDR_UNSET,
2126 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2127 only internal line out: (4pin header) RGGL
2128 Radio must be decoded by msp3410d (not routed through)*/
2130 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2133 [BTTV_BOARD_IVC200] = {
2134 /* Chris Willing <chris@vislab.usyd.edu.au> */
2140 .tuner_addr = ADDR_UNSET,
2141 .radio_addr = ADDR_UNSET,
2147 [BTTV_BOARD_XGUARD] = {
2148 .name = "Grand X-Guard / Trust 814PCI",
2154 .tuner_addr = ADDR_UNSET,
2155 .radio_addr = ADDR_UNSET,
2157 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2158 .muxsel_hook = xguard_muxsel,
2165 /* ---- card 0x68 ---------------------------------- */
2166 [BTTV_BOARD_NEBULA_DIGITV] = {
2167 .name = "Nebula Electronics DigiTV",
2171 .muxsel = { 2, 3, 1, 0 },
2177 .tuner_addr = ADDR_UNSET,
2178 .radio_addr = ADDR_UNSET,
2184 [BTTV_BOARD_PV143] = {
2185 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2186 .name = "ProVideo PV143",
2192 .muxsel = { 2, 3, 1, 0 },
2198 .tuner_addr = ADDR_UNSET,
2199 .radio_addr = ADDR_UNSET,
2201 [BTTV_BOARD_VD009X1_MINIDIN] = {
2202 /* M.Klahr@phytec.de */
2203 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2206 .tuner = -1, /* card has no tuner */
2209 .muxsel = { 2, 3, 1, 0 },
2210 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2214 .tuner_addr = ADDR_UNSET,
2215 .radio_addr = ADDR_UNSET,
2217 [BTTV_BOARD_VD009X1_COMBI] = {
2218 .name = "PHYTEC VD-009-X1 Combi (bt878)",
2221 .tuner = -1, /* card has no tuner */
2224 .muxsel = { 2, 3, 1, 1 },
2225 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2229 .tuner_addr = ADDR_UNSET,
2230 .radio_addr = ADDR_UNSET,
2233 /* ---- card 0x6c ---------------------------------- */
2234 [BTTV_BOARD_VD009_MINIDIN] = {
2235 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2238 .tuner = -1, /* card has no tuner */
2241 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2242 via the upper nibble of muxsel. here: used for
2243 xternal video-mux */
2244 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2245 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2249 .tuner_addr = ADDR_UNSET,
2250 .radio_addr = ADDR_UNSET,
2252 [BTTV_BOARD_VD009_COMBI] = {
2253 .name = "PHYTEC VD-009 Combi (bt878)",
2256 .tuner = -1, /* card has no tuner */
2259 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2260 via the upper nibble of muxsel. here: used for
2261 xternal video-mux */
2262 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2263 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2267 .tuner_addr = ADDR_UNSET,
2268 .radio_addr = ADDR_UNSET,
2270 [BTTV_BOARD_IVC100] = {
2276 .tuner_addr = ADDR_UNSET,
2277 .radio_addr = ADDR_UNSET,
2280 .muxsel = { 2, 3, 1, 0 },
2283 [BTTV_BOARD_IVC120] = {
2284 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2287 .audio_inputs = 0, /* card has no audio */
2288 .tuner = -1, /* card has no tuner */
2290 .tuner_addr = ADDR_UNSET,
2291 .radio_addr = ADDR_UNSET,
2292 .svhs = -1, /* card has no svhs */
2298 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2299 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2300 .muxsel_hook = ivc120_muxsel,
2304 /* ---- card 0x70 ---------------------------------- */
2305 [BTTV_BOARD_PC_HDTV] = {
2306 .name = "pcHDTV HD-2000 TV",
2311 .muxsel = { 2, 3, 1, 0 },
2312 .tuner_type = TUNER_PHILIPS_ATSC,
2313 .tuner_addr = ADDR_UNSET,
2314 .radio_addr = ADDR_UNSET,
2317 [BTTV_BOARD_TWINHAN_DST] = {
2318 .name = "Twinhan DST + clones",
2322 .tuner_type = TUNER_ABSENT,
2323 .tuner_addr = ADDR_UNSET,
2324 .radio_addr = ADDR_UNSET,
2328 [BTTV_BOARD_WINFASTVC100] = {
2329 .name = "Winfast VC100",
2334 .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2338 .tuner_type = TUNER_ABSENT,
2339 .tuner_addr = ADDR_UNSET,
2340 .radio_addr = ADDR_UNSET,
2343 [BTTV_BOARD_TEV560] = {
2344 .name = "Teppro TEV-560/InterVision IV-560",
2350 .muxsel = { 2, 3, 1, 1 },
2351 .gpiomux = { 1, 1, 1, 1 },
2353 .tuner_type = TUNER_PHILIPS_PAL,
2354 .tuner_addr = ADDR_UNSET,
2355 .radio_addr = ADDR_UNSET,
2359 /* ---- card 0x74 ---------------------------------- */
2360 [BTTV_BOARD_SIMUS_GVC1100] = {
2361 .name = "SIMUS GVC1100",
2367 .tuner_addr = ADDR_UNSET,
2368 .radio_addr = ADDR_UNSET,
2370 .muxsel = { 2, 2, 2, 2 },
2372 .muxsel_hook = gvc1100_muxsel,
2374 [BTTV_BOARD_NGSTV_PLUS] = {
2375 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2376 .name = "NGS NGSTV+",
2380 .gpiomask = 0x008007,
2381 .muxsel = { 2, 3, 0, 0 },
2382 .gpiomux = { 0, 0, 0, 0 },
2383 .gpiomute = 0x000003,
2385 .tuner_type = TUNER_PHILIPS_PAL,
2386 .tuner_addr = ADDR_UNSET,
2387 .radio_addr = ADDR_UNSET,
2390 [BTTV_BOARD_LMLBT4] = {
2391 /* http://linuxmedialabs.com */
2393 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2397 .muxsel = { 2, 3, 1, 0 },
2403 .tuner_addr = ADDR_UNSET,
2404 .radio_addr = ADDR_UNSET,
2406 [BTTV_BOARD_TEKRAM_M205] = {
2407 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2408 .name = "Tekram M205 PRO",
2412 .tuner_type = TUNER_PHILIPS_PAL,
2413 .tuner_addr = ADDR_UNSET,
2414 .radio_addr = ADDR_UNSET,
2418 .muxsel = { 2, 3, 1 },
2419 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2423 /* ---- card 0x78 ---------------------------------- */
2424 [BTTV_BOARD_CONTVFMI] = {
2425 /* Javier Cendan Ares <jcendan@lycos.es> */
2426 /* bt878 TV + FM without subsystem ID */
2427 .name = "Conceptronic CONTVFMi",
2432 .gpiomask = 0x008007,
2433 .muxsel = { 2, 3, 1, 1 },
2434 .gpiomux = { 0, 1, 2, 2 },
2438 .tuner_type = TUNER_PHILIPS_PAL,
2439 .tuner_addr = ADDR_UNSET,
2440 .radio_addr = ADDR_UNSET,
2444 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2445 /*Eric DEBIEF <debief@telemsa.com>*/
2446 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2447 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2449 .name = "Euresys Picolo Tetra",
2455 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2459 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2460 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2463 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2465 .tuner_addr = ADDR_UNSET,
2466 .radio_addr = ADDR_UNSET,
2468 [BTTV_BOARD_SPIRIT_TV] = {
2469 /* Spirit TV Tuner from http://spiritmodems.com.au */
2470 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2471 .name = "Spirit TV Tuner",
2476 .gpiomask = 0x0000000f,
2477 .muxsel = { 2, 1, 1 },
2478 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2479 .tuner_type = TUNER_TEMIC_PAL,
2480 .tuner_addr = ADDR_UNSET,
2481 .radio_addr = ADDR_UNSET,
2485 [BTTV_BOARD_AVDVBT_771] = {
2486 /* Wolfram Joost <wojo@frokaschwei.de> */
2487 .name = "AVerMedia AVerTV DVB-T 771",
2491 .tuner_type = TUNER_ABSENT,
2492 .tuner_addr = ADDR_UNSET,
2493 .radio_addr = ADDR_UNSET,
2494 .muxsel = { 3 , 3 },
2503 /* ---- card 0x7c ---------------------------------- */
2504 [BTTV_BOARD_AVDVBT_761] = {
2505 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2506 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2507 .name = "AverMedia AverTV DVB-T 761",
2511 .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2517 .tuner_addr = ADDR_UNSET,
2518 .radio_addr = ADDR_UNSET,
2523 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2524 /* andre.schwarz@matrix-vision.de */
2525 .name = "MATRIX Vision Sigma-SQ",
2531 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2532 3, 3, 3, 3, 3, 3, 3, 3 },
2533 .muxsel_hook = sigmaSQ_muxsel,
2538 .tuner_addr = ADDR_UNSET,
2539 .radio_addr = ADDR_UNSET,
2541 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2542 /* andre.schwarz@matrix-vision.de */
2543 .name = "MATRIX Vision Sigma-SLC",
2549 .muxsel = { 2, 2, 2, 2 },
2550 .muxsel_hook = sigmaSLC_muxsel,
2555 .tuner_addr = ADDR_UNSET,
2556 .radio_addr = ADDR_UNSET,
2558 /* BTTV_BOARD_APAC_VIEWCOMP */
2559 [BTTV_BOARD_APAC_VIEWCOMP] = {
2560 /* Attila Kondoros <attila.kondoros@chello.hu> */
2561 /* bt878 TV + FM 0x00000000 subsystem ID */
2562 .name = "APAC Viewcomp 878(AMAX)",
2568 .muxsel = { 2, 3, 1, 1 },
2569 .gpiomux = { 2, 0, 0, 0 },
2573 .tuner_type = TUNER_PHILIPS_PAL,
2574 .tuner_addr = ADDR_UNSET,
2575 .radio_addr = ADDR_UNSET,
2576 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2577 .has_radio = 1, /* not every card has radio */
2580 /* ---- card 0x80 ---------------------------------- */
2581 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2582 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2583 .name = "DViCO FusionHDTV DVB-T Lite",
2592 .tuner_addr = ADDR_UNSET,
2593 .radio_addr = ADDR_UNSET,
2595 [BTTV_BOARD_VGEAR_MYVCD] = {
2596 /* Steven <photon38@pchome.com.tw> */
2597 .name = "V-Gear MyVCD",
2603 .muxsel = {2, 3, 1, 0 },
2604 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2608 .tuner_type = TUNER_PHILIPS_NTSC_M,
2609 .tuner_addr = ADDR_UNSET,
2610 .radio_addr = ADDR_UNSET,
2613 [BTTV_BOARD_SUPER_TV] = {
2614 /* Rick C <cryptdragoon@gmail.com> */
2615 .name = "Super TV Tuner",
2620 .muxsel = { 2, 3, 1, 0 },
2621 .tuner_type = TUNER_PHILIPS_NTSC,
2622 .tuner_addr = ADDR_UNSET,
2623 .radio_addr = ADDR_UNSET,
2624 .gpiomask = 0x008007,
2625 .gpiomux = { 0, 0x000001,0,0 },
2629 [BTTV_BOARD_TIBET_CS16] = {
2630 /* Chris Fanning <video4linux@haydon.net> */
2631 .name = "Tibet Systems 'Progress DVR' CS16",
2636 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2642 .tuner_addr = ADDR_UNSET,
2643 .radio_addr = ADDR_UNSET,
2644 .muxsel_hook = tibetCS16_muxsel,
2646 [BTTV_BOARD_KODICOM_4400R] = {
2647 /* Bill Brack <wbrack@mmm.com.hk> */
2649 * Note that, because of the card's wiring, the "master"
2650 * BT878A chip (i.e. the one which controls the analog switch
2651 * and must use this card type) is the 2nd one detected. The
2652 * other 3 chips should use card type 0x85, whose description
2653 * follows this one. There is a EEPROM on the card (which is
2654 * connected to the I2C of one of those other chips), but is
2655 * not currently handled. There is also a facility for a
2656 * "monitor", which is also not currently implemented.
2658 .name = "Kodicom 4400R (master)",
2663 .tuner_addr = ADDR_UNSET,
2664 .radio_addr = ADDR_UNSET,
2666 /* GPIO bits 0-9 used for analog switch:
2667 * 00 - 03: camera selector
2668 * 04 - 06: channel (controller) selector
2669 * 07: data (1->on, 0->off)
2672 * bit 16 is input from sync separator for the channel
2674 .gpiomask = 0x0003ff,
2676 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2681 .muxsel_hook = kodicom4400r_muxsel,
2683 [BTTV_BOARD_KODICOM_4400R_SL] = {
2684 /* Bill Brack <wbrack@mmm.com.hk> */
2685 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2686 * one which controls the analog switch, and must use the card type)
2687 * is the 2nd one detected. The other 3 chips should use this card
2690 .name = "Kodicom 4400R (slave)",
2695 .tuner_addr = ADDR_UNSET,
2696 .radio_addr = ADDR_UNSET,
2698 .gpiomask = 0x010000,
2700 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2705 .muxsel_hook = kodicom4400r_muxsel,
2707 /* ---- card 0x86---------------------------------- */
2708 [BTTV_BOARD_ADLINK_RTV24] = {
2709 /* Michael Henson <mhenson@clarityvi.com> */
2710 /* Adlink RTV24 with special unlock codes */
2711 .name = "Adlink RTV24",
2716 .muxsel = { 2, 3, 1, 0 },
2718 .tuner_addr = ADDR_UNSET,
2719 .radio_addr = ADDR_UNSET,
2722 /* ---- card 0x87---------------------------------- */
2723 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2724 /* Michael Krufky <mkrufky@m1k.net> */
2725 .name = "DViCO FusionHDTV 5 Lite",
2727 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2728 .tuner_addr = ADDR_UNSET,
2729 .radio_addr = ADDR_UNSET,
2733 .muxsel = { 2, 3, 1 },
2734 .gpiomask = 0x00e00007,
2735 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2736 .gpiomute = 0x00c00007,
2742 /* ---- card 0x88---------------------------------- */
2743 [BTTV_BOARD_ACORP_Y878F] = {
2744 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2745 .name = "Acorp Y878F",
2750 .gpiomask = 0x01fe00,
2751 .muxsel = { 2, 3, 1, 1 },
2752 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2753 .gpiomute = 0x002000,
2756 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2757 .tuner_addr = 0xc1 >>1,
2758 .radio_addr = 0xc1 >>1,
2761 /* ---- card 0x89 ---------------------------------- */
2762 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2763 .name = "Conceptronic CTVFMi v2",
2768 .gpiomask = 0x001c0007,
2769 .muxsel = { 2, 3, 1, 1 },
2770 .gpiomux = { 0, 1, 2, 2 },
2774 .tuner_type = TUNER_TENA_9533_DI,
2775 .tuner_addr = ADDR_UNSET,
2776 .radio_addr = ADDR_UNSET,
2780 /* ---- card 0x8a ---------------------------------- */
2781 [BTTV_BOARD_PV_BT878P_2E] = {
2782 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2787 .gpiomask = 0x01fe00,
2788 .muxsel = { 2,3,1,1,-1 },
2789 .digital_mode = DIGITAL_MODE_CAMERA,
2790 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2791 .gpiomute = 0x12400,
2794 .tuner_type = TUNER_LG_PAL_FM,
2795 .tuner_addr = ADDR_UNSET,
2796 .radio_addr = ADDR_UNSET,
2799 /* ---- card 0x8b ---------------------------------- */
2800 [BTTV_BOARD_PV_M4900] = {
2801 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2802 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2808 .muxsel = { 2, 3, 1, 1 },
2809 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2813 .tuner_type = TUNER_YMEC_TVF_5533MF,
2814 .tuner_addr = ADDR_UNSET,
2815 .radio_addr = ADDR_UNSET,
2819 /* ---- card 0x8c ---------------------------------- */
2820 [BTTV_BOARD_OSPREY440] = {
2821 .name = "Osprey 440",
2828 .tuner_type = UNSET,
2829 .tuner_addr = ADDR_UNSET,
2830 .radio_addr = ADDR_UNSET,
2835 /* ---- card 0x8d ---------------------------------- */
2836 [BTTV_BOARD_ASOUND_SKYEYE] = {
2837 .name = "Asound Skyeye PCTV",
2843 .muxsel = { 2, 3, 1, 1 },
2844 .gpiomux = { 2, 0, 0, 0 },
2849 .tuner_addr = ADDR_UNSET,
2850 .radio_addr = ADDR_UNSET,
2852 /* ---- card 0x8e ---------------------------------- */
2853 [BTTV_BOARD_SABRENT_TVFM] = {
2854 .name = "Sabrent TV-FM (bttv version)",
2859 .gpiomask = 0x108007,
2860 .muxsel = { 2, 3, 1, 1 },
2861 .gpiomux = { 100000, 100002, 100002, 100000 },
2866 .tuner_type = TUNER_TNF_5335MF,
2867 .tuner_addr = ADDR_UNSET,
2870 /* ---- card 0x8f ---------------------------------- */
2871 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2872 .name = "Hauppauge ImpactVCB (bt878)",
2877 .gpiomask = 0x0f, /* old: 7 */
2878 .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
2883 .tuner_addr = ADDR_UNSET,
2884 .radio_addr = ADDR_UNSET,
2886 [BTTV_BOARD_MACHTV_MAGICTV] = {
2887 /* Julian Calaby <julian.calaby@gmail.com>
2888 * Slightly different from original MachTV definition (0x60)
2890 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2891 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2892 * properly (methinks) causing no keyup bits being set */
2894 .name = "MagicTV", /* rebranded MachTV */
2900 .muxsel = { 2, 3, 1, 1 },
2901 .gpiomux = { 0, 1, 2, 3 },
2903 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2904 .tuner_addr = ADDR_UNSET,
2905 .radio_addr = ADDR_UNSET,
2912 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2914 /* ----------------------------------------------------------------------- */
2916 static unsigned char eeprom_data[256];
2921 void __devinit bttv_idcard(struct bttv *btv)
2923 unsigned int gpiobits;
2927 /* read PCI subsystem ID */
2928 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2929 btv->cardid = tmp << 16;
2930 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2933 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2934 /* look for the card */
2935 for (type = -1, i = 0; cards[i].id != 0; i++)
2936 if (cards[i].id == btv->cardid)
2941 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2942 "PCI subsystem ID is %04x:%04x\n",
2943 btv->c.nr,cards[type].name,cards[type].cardnr,
2944 btv->cardid & 0xffff,
2945 (btv->cardid >> 16) & 0xffff);
2946 btv->c.type = cards[type].cardnr;
2949 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2950 btv->c.nr, btv->cardid & 0xffff,
2951 (btv->cardid >> 16) & 0xffff);
2952 printk(KERN_DEBUG "please mail id, board name and "
2953 "the correct card= insmod option to video4linux-list@redhat.com\n");
2957 /* let the user override the autodetected type */
2958 if (card[btv->c.nr] < bttv_num_tvcards)
2959 btv->c.type=card[btv->c.nr];
2961 /* print which card config we are using */
2962 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2963 bttv_tvcards[btv->c.type].name, btv->c.type,
2964 card[btv->c.nr] < bttv_num_tvcards
2965 ? "insmod option" : "autodetected");
2967 /* overwrite gpio stuff ?? */
2968 if (UNSET == audioall && UNSET == audiomux[0])
2971 if (UNSET != audiomux[0]) {
2973 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2974 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2975 gpiobits |= audiomux[i];
2978 gpiobits = audioall;
2979 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2980 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2983 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2984 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2985 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2986 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2987 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2993 * (most) board specific initialisations goes here
2996 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2997 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3001 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3002 type = BTTV_BOARD_MODTEC_205;
3003 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3004 type = BTTV_BOARD_EURESYS_PICOLO;
3005 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3006 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3010 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3011 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3015 static void flyvideo_gpio(struct bttv *btv)
3017 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3020 gpio_inout(0xffffff, 0);
3021 udelay(8); /* without this we would see the 0x1800 mask */
3023 /* FIXME: must restore OUR_EN ??? */
3025 /* all cards provide GPIO info, some have an additional eeprom
3026 * LR50: GPIO coding can be found lower right CP1 .. CP9
3027 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3029 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3031 * lowest 3 bytes are remote control codes (no handshake needed)
3032 * xxxFFF: No remote control chip soldered
3033 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3034 * Note: Some bits are Audio_Mask !
3036 ttype=(gpio&0x0f0000)>>16;
3038 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3040 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3042 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3044 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3046 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3049 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3052 has_remote = gpio & 0x800000;
3053 has_radio = gpio & 0x400000;
3054 /* unknown 0x200000;
3055 * unknown2 0x100000; */
3056 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3057 has_tda9820_tda9821 = !(gpio & 0x004000);
3058 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3060 * gpio & 0x001000 output bit for audio routing */
3063 tuner=4; /* No tuner present */
3065 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3066 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3067 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3068 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3069 is_capture_only?"yes":"no ");
3071 if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3072 btv->tuner_type = tuner;
3073 btv->has_radio = has_radio;
3075 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3076 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3077 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3078 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3079 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3082 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3083 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3084 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3085 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3087 static void miro_pinnacle_gpio(struct bttv *btv)
3092 gpio_inout(0xffffff, 0);
3094 id = ((gpio>>10) & 63) -1;
3095 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3097 btv->tuner_type = miro_tunermap[id];
3098 if (0 == (gpio & 0x20)) {
3100 if (!miro_fmtuner[id]) {
3101 btv->has_matchbox = 1;
3102 btv->mbox_we = (1<<6);
3103 btv->mbox_most = (1<<7);
3104 btv->mbox_clk = (1<<8);
3105 btv->mbox_data = (1<<9);
3106 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3112 if (btv->c.type == BTTV_BOARD_MIRO)
3113 btv->c.type = BTTV_BOARD_MIROPRO;
3114 if (btv->c.type == BTTV_BOARD_PINNACLE)
3115 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3118 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3119 btv->c.nr, id+1, btv->tuner_type,
3120 !btv->has_radio ? "no" :
3121 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3122 (-1 == msp) ? "no" : "yes");
3124 /* new cards with microtune tuner */
3129 info = "PAL / mono";
3130 btv->tda9887_conf = TDA9887_INTERCARRIER;
3133 info = "PAL+SECAM / stereo";
3135 btv->tda9887_conf = TDA9887_QSS;
3138 info = "NTSC / stereo";
3140 btv->tda9887_conf = TDA9887_QSS;
3143 info = "PAL+SECAM / mono";
3144 btv->tda9887_conf = TDA9887_QSS;
3147 info = "NTSC / mono";
3148 btv->tda9887_conf = TDA9887_INTERCARRIER;
3151 info = "NTSC / stereo";
3152 btv->tda9887_conf = TDA9887_INTERCARRIER;
3155 info = "PAL / stereo";
3156 btv->tda9887_conf = TDA9887_INTERCARRIER;
3159 info = "oops: unknown card";
3163 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3165 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3166 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3167 btv->tuner_type = TUNER_MT2032;
3171 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3172 #define LM1882_SYNC_DRIVE 0x200000L
3174 static void init_ids_eagle(struct bttv *btv)
3176 gpio_inout(0xffffff,0xFFFF37);
3177 gpio_write(0x200020);
3179 /* flash strobe inverter ?! */
3180 gpio_write(0x200024);
3182 /* switch sync drive off */
3183 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3185 /* set BT848 muxel to 2 */
3186 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3189 /* Muxsel helper for the IDS Eagle.
3190 * the eagles does not use the standard muxsel-bits but
3191 * has its own multiplexer */
3192 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3194 btaor((2)<<5, ~(3<<5), BT848_IFORM);
3195 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3198 /* set chroma ADC to sleep */
3199 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3200 /* set to composite video */
3201 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3202 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3204 /* switch sync drive off */
3205 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3208 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3210 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3211 gpio_write(masks[input%4]);
3214 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3217 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3218 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3220 IN - sensor inputs, INx - sensor inputs and TI XORed together
3221 O1,O2,O3 - alarm outputs (relays)
3223 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3227 static void init_lmlbt4x(struct bttv *btv)
3229 printk(KERN_DEBUG "LMLBT4x init\n");
3230 btwrite(0x000000, BT848_GPIO_REG_INP);
3231 gpio_inout(0xffffff, 0x0006C0);
3232 gpio_write(0x000000);
3235 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3237 unsigned int inmux = input % 8;
3238 gpio_inout( 0xf, 0xf );
3239 gpio_bits( 0xf, inmux );
3242 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3244 unsigned int inmux = input % 4;
3245 gpio_inout( 3<<9, 3<<9 );
3246 gpio_bits( 3<<9, inmux<<9 );
3249 /* ----------------------------------------------------------------------- */
3251 static void bttv_reset_audio(struct bttv *btv)
3254 * BT878A has a audio-reset register.
3255 * 1. This register is an audio reset function but it is in
3256 * function-0 (video capture) address space.
3257 * 2. It is enough to do this once per power-up of the card.
3258 * 3. There is a typo in the Conexant doc -- it is not at
3259 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3260 * --//Shrikumar 030609
3266 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3267 btwrite((1<<7), 0x058);
3272 /* initialization part one -- before registering i2c bus */
3273 void __devinit bttv_init_card1(struct bttv *btv)
3275 switch (btv->c.type) {
3276 case BTTV_BOARD_HAUPPAUGE:
3277 case BTTV_BOARD_HAUPPAUGE878:
3278 boot_msp34xx(btv,5);
3280 case BTTV_BOARD_VOODOOTV_FM:
3281 boot_msp34xx(btv,20);
3283 case BTTV_BOARD_AVERMEDIA98:
3284 boot_msp34xx(btv,11);
3286 case BTTV_BOARD_HAUPPAUGEPVR:
3289 case BTTV_BOARD_TWINHAN_DST:
3290 case BTTV_BOARD_AVDVBT_771:
3291 case BTTV_BOARD_PINNACLESAT:
3292 btv->use_i2c_hw = 1;
3294 case BTTV_BOARD_ADLINK_RTV24:
3299 if (!bttv_tvcards[btv->c.type].has_dvb)
3300 bttv_reset_audio(btv);
3303 /* initialization part two -- after registering i2c bus */
3304 void __devinit bttv_init_card2(struct bttv *btv)
3307 int addr=ADDR_UNSET;
3309 btv->tuner_type = -1;
3311 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3312 bttv_readee(btv,eeprom_data,0xa0);
3313 identify_by_eeprom(btv,eeprom_data);
3316 switch (btv->c.type) {
3317 case BTTV_BOARD_MIRO:
3318 case BTTV_BOARD_MIROPRO:
3319 case BTTV_BOARD_PINNACLE:
3320 case BTTV_BOARD_PINNACLEPRO:
3322 miro_pinnacle_gpio(btv);
3324 case BTTV_BOARD_FLYVIDEO_98:
3325 case BTTV_BOARD_MAXI:
3326 case BTTV_BOARD_LIFE_FLYKIT:
3327 case BTTV_BOARD_FLYVIDEO:
3328 case BTTV_BOARD_TYPHOON_TVIEW:
3329 case BTTV_BOARD_CHRONOS_VS2:
3330 case BTTV_BOARD_FLYVIDEO_98FM:
3331 case BTTV_BOARD_FLYVIDEO2000:
3332 case BTTV_BOARD_FLYVIDEO98EZ:
3333 case BTTV_BOARD_CONFERENCETV:
3334 case BTTV_BOARD_LIFETEC_9415:
3337 case BTTV_BOARD_HAUPPAUGE:
3338 case BTTV_BOARD_HAUPPAUGE878:
3339 case BTTV_BOARD_HAUPPAUGEPVR:
3340 /* pick up some config infos from the eeprom */
3341 bttv_readee(btv,eeprom_data,0xa0);
3342 hauppauge_eeprom(btv);
3344 case BTTV_BOARD_AVERMEDIA98:
3345 case BTTV_BOARD_AVPHONE98:
3346 bttv_readee(btv,eeprom_data,0xa0);
3347 avermedia_eeprom(btv);
3349 case BTTV_BOARD_PXC200:
3352 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3353 picolo_tetra_init(btv);
3355 case BTTV_BOARD_VHX:
3357 btv->has_matchbox = 1;
3358 btv->mbox_we = 0x20;
3360 btv->mbox_clk = 0x08;
3361 btv->mbox_data = 0x10;
3362 btv->mbox_mask = 0x38;
3364 case BTTV_BOARD_VOBIS_BOOSTAR:
3365 case BTTV_BOARD_TERRATV:
3366 terratec_active_radio_upgrade(btv);
3368 case BTTV_BOARD_MAGICTVIEW061:
3369 if (btv->cardid == 0x3002144f) {
3371 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3374 case BTTV_BOARD_STB2:
3375 if (btv->cardid == 0x3060121a) {
3376 /* Fix up entry for 3DFX VoodooTV 100,
3377 which is an OEM STB card variant. */
3379 btv->tuner_type=TUNER_TEMIC_NTSC;
3382 case BTTV_BOARD_OSPREY1x0:
3383 case BTTV_BOARD_OSPREY1x0_848:
3384 case BTTV_BOARD_OSPREY101_848:
3385 case BTTV_BOARD_OSPREY1x1:
3386 case BTTV_BOARD_OSPREY1x1_SVID:
3387 case BTTV_BOARD_OSPREY2xx:
3388 case BTTV_BOARD_OSPREY2x0_SVID:
3389 case BTTV_BOARD_OSPREY2x0:
3390 case BTTV_BOARD_OSPREY500:
3391 case BTTV_BOARD_OSPREY540:
3392 case BTTV_BOARD_OSPREY2000:
3393 bttv_readee(btv,eeprom_data,0xa0);
3396 case BTTV_BOARD_IDS_EAGLE:
3397 init_ids_eagle(btv);
3399 case BTTV_BOARD_MODTEC_205:
3400 bttv_readee(btv,eeprom_data,0xa0);
3403 case BTTV_BOARD_LMLBT4:
3406 case BTTV_BOARD_TIBET_CS16:
3407 tibetCS16_init(btv);
3409 case BTTV_BOARD_KODICOM_4400R:
3410 kodicom4400r_init(btv);
3414 /* pll configuration */
3415 if (!(btv->id==848 && btv->revision==0x11)) {
3416 /* defaults from card list */
3417 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3418 btv->pll.pll_ifreq=28636363;
3419 btv->pll.pll_crystal=BT848_IFORM_XT0;
3421 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3422 btv->pll.pll_ifreq=35468950;
3423 btv->pll.pll_crystal=BT848_IFORM_XT1;
3425 /* insmod options can override */
3426 switch (pll[btv->c.nr]) {
3428 btv->pll.pll_crystal = 0;
3429 btv->pll.pll_ifreq = 0;
3430 btv->pll.pll_ofreq = 0;
3432 case 1: /* 28 MHz */
3434 btv->pll.pll_ifreq = 28636363;
3435 btv->pll.pll_ofreq = 0;
3436 btv->pll.pll_crystal = BT848_IFORM_XT0;
3438 case 2: /* 35 MHz */
3440 btv->pll.pll_ifreq = 35468950;
3441 btv->pll.pll_ofreq = 0;
3442 btv->pll.pll_crystal = BT848_IFORM_XT1;
3446 btv->pll.pll_current = -1;
3448 /* tuner configuration (from card list / autodetect / insmod option) */
3449 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3450 addr = bttv_tvcards[btv->c.type].tuner_addr;
3452 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3453 if(UNSET == btv->tuner_type)
3454 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3455 if (UNSET != tuner[btv->c.nr])
3456 btv->tuner_type = tuner[btv->c.nr];
3457 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3459 if (btv->tuner_type != UNSET) {
3460 struct tuner_setup tun_setup;
3462 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3463 tun_setup.type = btv->tuner_type;
3464 tun_setup.addr = addr;
3466 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3469 if (btv->tda9887_conf) {
3470 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3471 &btv->tda9887_conf);
3474 btv->svhs = bttv_tvcards[btv->c.type].svhs;
3475 if (svhs[btv->c.nr] != UNSET)
3476 btv->svhs = svhs[btv->c.nr];
3477 if (remote[btv->c.nr] != UNSET)
3478 btv->has_remote = remote[btv->c.nr];
3480 if (bttv_tvcards[btv->c.type].has_radio)
3482 if (bttv_tvcards[btv->c.type].has_remote)
3484 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3486 if (bttv_tvcards[btv->c.type].audio_hook)
3487 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3489 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3490 /* detect Bt832 chip for quartzsight digital camera */
3491 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3492 (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3499 /* try to detect audio/fader chips */
3500 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3501 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3502 request_module("msp3400");
3504 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3505 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3506 request_module("msp3400");
3508 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3509 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3510 request_module("tda9875");
3512 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3513 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3514 request_module("tda7432");
3516 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3517 request_module("tvaudio");
3521 if (btv->tda9887_conf)
3523 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3524 bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3526 /* Hybrid DVB card, DOES have a tda9887 */
3527 if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3529 if (btv->tuner_type != UNSET)
3530 request_module("tuner");
3534 /* ----------------------------------------------------------------------- */
3536 static void modtec_eeprom(struct bttv *btv)
3538 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3539 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3540 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3541 btv->c.nr,&eeprom_data[0x1e]);
3542 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3543 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3544 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3545 btv->c.nr,&eeprom_data[0x1e]);
3546 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3547 btv->tuner_type=TUNER_PHILIPS_NTSC;
3548 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3549 btv->c.nr,&eeprom_data[0x1e]);
3551 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3552 btv->c.nr,&eeprom_data[0x1e]);
3556 static void __devinit hauppauge_eeprom(struct bttv *btv)
3560 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3561 btv->tuner_type = tv.tuner_type;
3562 btv->has_radio = tv.has_radio;
3564 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3565 btv->c.nr, tv.model);
3568 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3569 * type based on model #.
3571 if(tv.model == 64900) {
3572 printk("bttv%d: Switching board type from %s to %s\n",
3574 bttv_tvcards[btv->c.type].name,
3575 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3576 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3580 static int terratec_active_radio_upgrade(struct bttv *btv)
3585 btv->has_matchbox = 1;
3586 btv->mbox_we = 0x10;
3587 btv->mbox_most = 0x20;
3588 btv->mbox_clk = 0x08;
3589 btv->mbox_data = 0x04;
3590 btv->mbox_mask = 0x3c;
3592 btv->mbox_iow = 1 << 8;
3593 btv->mbox_ior = 1 << 9;
3594 btv->mbox_csel = 1 << 10;
3597 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3598 if (0x1ed8 == tea5757_read(btv)) {
3599 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3602 btv->has_matchbox = 1;
3605 btv->has_matchbox = 0;
3611 /* ----------------------------------------------------------------------- */
3614 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3616 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3617 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3618 * unpacked with unzip).
3620 #define PVR_GPIO_DELAY 10
3622 #define BTTV_ALT_DATA 0x000001
3623 #define BTTV_ALT_DCLK 0x100000
3624 #define BTTV_ALT_NCONFIG 0x800000
3626 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3632 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3634 udelay(PVR_GPIO_DELAY);
3636 gpio_write(BTTV_ALT_NCONFIG);
3637 udelay(PVR_GPIO_DELAY);
3639 for (n = 0; n < microlen; n++) {
3641 for (i = 0 ; i < 8 ; i++) {
3642 gpio_bits(BTTV_ALT_DCLK,0);
3644 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3646 gpio_bits(BTTV_ALT_DATA,0);
3647 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3651 gpio_bits(BTTV_ALT_DCLK,0);
3652 udelay(PVR_GPIO_DELAY);
3654 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3655 for (i = 0 ; i < 30 ; i++) {
3656 gpio_bits(BTTV_ALT_DCLK,0);
3657 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3659 gpio_bits(BTTV_ALT_DCLK,0);
3663 static int __devinit pvr_boot(struct bttv *btv)
3665 const struct firmware *fw_entry;
3668 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3670 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3674 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3675 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3676 btv->c.nr, (rc < 0) ? "failed" : "ok");
3677 release_firmware(fw_entry);
3681 /* ----------------------------------------------------------------------- */
3682 /* some osprey specific stuff */
3684 static void __devinit osprey_eeprom(struct bttv *btv)
3687 unsigned char *ee = eeprom_data;
3688 unsigned long serial = 0;
3690 if (btv->c.type == 0) {
3691 /* this might be an antique... check for MMAC label in eeprom */
3692 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3693 unsigned char checksum = 0;
3694 for (i = 0; i < 21; i++)
3696 if (checksum != ee[21])
3698 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3699 for (i = 12; i < 21; i++)
3700 serial *= 10, serial += ee[i] - '0';
3703 unsigned short type;
3706 for (; offset < 8*16; offset += 16) {
3707 unsigned short checksum = 0;
3708 /* verify the checksum */
3709 for (i = 0; i < 14; i++)
3710 checksum += ee[i+offset];
3711 checksum = ~checksum; /* no idea why */
3712 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3713 ((checksum & 0x0FF) == ee[offset+15])) {
3721 /* found a valid descriptor */
3722 type = (ee[offset+4]<<8) | (ee[offset+5]);
3727 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3730 btv->c.type = BTTV_BOARD_OSPREY101_848;
3736 btv->c.type = BTTV_BOARD_OSPREY1x0;
3740 btv->c.type = BTTV_BOARD_OSPREY1x1;
3745 btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3751 btv->c.type = BTTV_BOARD_OSPREY2xx;
3755 btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3758 btv->c.type = BTTV_BOARD_OSPREY500;
3762 btv->c.type = BTTV_BOARD_OSPREY540;
3763 /* bttv_osprey_540_init(btv); */
3768 btv->c.type = BTTV_BOARD_OSPREY2x0;
3769 /* enable output on select control lines */
3770 gpio_inout(0xffffff,0x000303);
3773 /* unknown...leave generic, but get serial # */
3776 serial = (ee[offset+6] << 24)
3777 | (ee[offset+7] << 16)
3778 | (ee[offset+8] << 8)
3782 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3783 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3786 /* ----------------------------------------------------------------------- */
3787 /* AVermedia specific stuff, from bktr_card.c */
3789 static int tuner_0_table[] = {
3790 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3791 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3792 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3793 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3794 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3795 TUNER_PHILIPS_FM1216ME_MK3 };
3797 static int tuner_1_table[] = {
3798 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3799 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3800 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3801 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3802 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3804 static void __devinit avermedia_eeprom(struct bttv *btv)
3806 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3808 tuner_make = (eeprom_data[0x41] & 0x7);
3809 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3810 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3811 btv->has_remote = (eeprom_data[0x42] & 0x01);
3813 if (tuner_make == 0 || tuner_make == 2)
3814 if(tuner_format <=0x0a)
3815 tuner = tuner_0_table[tuner_format];
3816 if (tuner_make == 1)
3817 if(tuner_format <=9)
3818 tuner = tuner_1_table[tuner_format];
3820 if (tuner_make == 4)
3821 if(tuner_format == 0x09)
3822 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3824 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3825 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3827 btv->tuner_type=tuner;
3830 printk("Unknown type");
3831 printk(" radio:%s remote control:%s\n",
3832 tuner_tv_fm ? "yes" : "no",
3833 btv->has_remote ? "yes" : "no");
3836 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3837 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3839 /* fix up our card entry */
3840 if(norm==VIDEO_MODE_NTSC) {
3841 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3842 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3843 dprintk("bttv_tda9880_setnorm to NTSC\n");
3846 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3847 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3848 dprintk("bttv_tda9880_setnorm to PAL\n");
3850 /* set GPIO according */
3851 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3852 bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3857 * reset/enable the MSP on some Hauppauge cards
3858 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3863 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3865 int mask = (1 << pin);
3867 gpio_inout(mask,mask);
3870 gpio_bits(mask,mask);
3873 bttv_gpio_tracking(btv,"msp34xx");
3875 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3876 "init [%d]\n", btv->c.nr, pin);
3879 static void __devinit boot_bt832(struct bttv *btv)
3883 /* ----------------------------------------------------------------------- */
3884 /* Imagenation L-Model PXC200 Framegrabber */
3885 /* This is basically the same procedure as
3886 * used by Alessandro Rubini in his pxc200
3887 * driver, but using BTTV functions */
3889 static void __devinit init_PXC200(struct bttv *btv)
3891 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3892 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3898 /* Initialise GPIO-connevted stuff */
3899 gpio_inout(0xffffff, (1<<13));
3903 /* GPIO inputs are pulled up, so no need to drive
3904 * reset pin any longer */
3905 gpio_bits(0xffffff, 0);
3907 bttv_gpio_tracking(btv,"pxc200");
3909 /* we could/should try and reset/control the AD pots? but
3910 right now we simply turned off the crushing. Without
3911 this the AGC drifts drifts
3912 remember the EN is reverse logic -->
3913 setting BT848_ADC_AGC_EN disable the AGC
3914 tboult@eecs.lehigh.edu
3917 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3919 /* Initialise MAX517 DAC */
3920 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3921 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3923 /* Initialise 12C508 PIC */
3924 /* The I2CWrite and I2CRead commmands are actually to the
3925 * same chips - but the R/W bit is included in the address
3926 * argument so the numbers are different */
3929 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3931 /* First of all, enable the clock line. This is used in the PXC200-F */
3932 val = btread(BT848_GPIO_DMA_CTL);
3933 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3934 btwrite(val, BT848_GPIO_DMA_CTL);
3936 /* Then, push to 0 the reset pin long enough to reset the *
3937 * device same as above for the reset line, but not the same
3938 * value sent to the GPIO-connected stuff
3939 * which one is the good one? */
3940 gpio_inout(0xffffff,(1<<2));
3945 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3946 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3949 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3950 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3954 printk(KERN_INFO "PXC200 Initialised.\n");
3959 /* ----------------------------------------------------------------------- */
3961 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3962 * it. This apparently involves the following procedure for each 878 chip:
3964 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3966 * 2) write to GPIO_DATA
3972 * read from GPIO_DATA into buf (uint_32)
3973 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3974 * error. ERROR_CPLD_Check_Failed stop.
3976 * 3) write to GPIO_DATA
3977 * - write 0x4400 + 0x0E
3979 * - write 0x4410 + 0x0E
3982 * read from GPIO_DATA into buf (uint_32)
3983 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
3984 * error. ERROR_CPLD_Check_Failed.
3986 /* ----------------------------------------------------------------------- */
3988 init_RTV24 (struct bttv *btv)
3990 uint32_t dataRead = 0;
3991 long watchdog_value = 0x0E;
3994 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3997 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
3999 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4001 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4003 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4005 dataRead = btread (BT848_GPIO_DATA);
4007 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4009 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4010 btv->c.nr, dataRead);
4013 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4015 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4017 btwrite (watchdog_value, BT848_GPIO_DATA);
4019 dataRead = btread (BT848_GPIO_DATA);
4021 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4023 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4024 btv->c.nr, dataRead);
4030 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4035 /* ----------------------------------------------------------------------- */
4036 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4038 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4039 * This code is placed under the terms of the GNU General Public License
4041 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4044 static void bus_low(struct bttv *btv, int bit)
4046 if (btv->mbox_ior) {
4047 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4048 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4055 if (btv->mbox_ior) {
4056 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4061 static void bus_high(struct bttv *btv, int bit)
4063 if (btv->mbox_ior) {
4064 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4065 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4072 if (btv->mbox_ior) {
4073 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4078 static int bus_in(struct bttv *btv, int bit)
4080 if (btv->mbox_ior) {
4081 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4082 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4085 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4088 return gpio_read() & (bit);
4091 /* TEA5757 register bits */
4092 #define TEA_FREQ 0:14
4093 #define TEA_BUFFER 15:15
4095 #define TEA_SIGNAL_STRENGTH 16:17
4097 #define TEA_PORT1 18:18
4098 #define TEA_PORT0 19:19
4100 #define TEA_BAND 20:21
4101 #define TEA_BAND_FM 0
4102 #define TEA_BAND_MW 1
4103 #define TEA_BAND_LW 2
4104 #define TEA_BAND_SW 3
4106 #define TEA_MONO 22:22
4107 #define TEA_ALLOW_STEREO 0
4108 #define TEA_FORCE_MONO 1
4110 #define TEA_SEARCH_DIRECTION 23:23
4111 #define TEA_SEARCH_DOWN 0
4112 #define TEA_SEARCH_UP 1
4114 #define TEA_STATUS 24:24
4115 #define TEA_STATUS_TUNED 0
4116 #define TEA_STATUS_SEARCHING 1
4118 /* Low-level stuff */
4119 static int tea5757_read(struct bttv *btv)
4121 unsigned long timeout;
4125 /* better safe than sorry */
4126 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4128 if (btv->mbox_ior) {
4129 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4130 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4135 bttv_gpio_tracking(btv,"tea5757 read");
4137 bus_low(btv,btv->mbox_we);
4138 bus_low(btv,btv->mbox_clk);
4141 timeout= jiffies + HZ;
4143 /* wait for DATA line to go low; error if it doesn't */
4144 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4146 if (bus_in(btv,btv->mbox_data)) {
4147 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4151 dprintk("bttv%d: tea5757:",btv->c.nr);
4152 for (i = 0; i < 24; i++) {
4154 bus_high(btv,btv->mbox_clk);
4156 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4157 bus_low(btv,btv->mbox_clk);
4159 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4160 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4162 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4166 static int tea5757_write(struct bttv *btv, int value)
4171 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4173 if (btv->mbox_ior) {
4174 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4175 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4179 bttv_gpio_tracking(btv,"tea5757 write");
4181 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4182 bus_low(btv,btv->mbox_clk);
4183 bus_high(btv,btv->mbox_we);
4184 for (i = 0; i < 25; i++) {
4185 if (reg & 0x1000000)
4186 bus_high(btv,btv->mbox_data);
4188 bus_low(btv,btv->mbox_data);
4190 bus_high(btv,btv->mbox_clk);
4192 bus_low(btv,btv->mbox_clk);
4195 bus_low(btv,btv->mbox_we); /* unmute !!! */
4199 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4201 dprintk("tea5757_set_freq %d\n",freq);
4202 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4206 /* ----------------------------------------------------------------------- */
4209 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4211 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4212 int bits_out, loops, vol, data;
4215 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4216 v->flags |= VIDEO_AUDIO_VOLUME;
4220 /* 32 levels logarithmic */
4221 vol = 32 - ((v->volume>>11));
4223 bits_out = (PT2254_DBS_IN_2>>(vol%5));
4225 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4226 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4228 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4229 WINVIEW_PT2254_STROBE);
4230 for (loops = 17; loops >= 0 ; loops--) {
4231 if (bits_out & (1<<loops))
4232 data |= WINVIEW_PT2254_DATA;
4234 data &= ~WINVIEW_PT2254_DATA;
4237 data |= WINVIEW_PT2254_CLK;
4240 data &= ~WINVIEW_PT2254_CLK;
4243 data |= WINVIEW_PT2254_STROBE;
4244 data &= ~WINVIEW_PT2254_DATA;
4247 data &= ~WINVIEW_PT2254_STROBE;
4251 /* ----------------------------------------------------------------------- */
4252 /* mono/stereo control for various cards (which don't use i2c chips but */
4253 /* connect something to the GPIO pins */
4256 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4258 unsigned int con = 0;
4261 gpio_inout(0x300, 0x300);
4262 if (v->mode & VIDEO_SOUND_LANG1)
4264 if (v->mode & VIDEO_SOUND_LANG2)
4266 if (v->mode & VIDEO_SOUND_STEREO)
4268 /* if (v->mode & VIDEO_SOUND_MONO)
4270 gpio_bits(0x300, con);
4272 v->mode = VIDEO_SOUND_STEREO |
4273 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4278 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4280 unsigned int val, con;
4282 if (btv->radio_user)
4288 if (v->mode & VIDEO_SOUND_LANG2) {
4289 if (v->mode & VIDEO_SOUND_LANG1) {
4298 if (con != (val & 0x300)) {
4299 gpio_bits(0x300, con);
4301 bttv_gpio_tracking(btv,"gvbctv5pci");
4304 switch (val & 0x70) {
4306 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4309 v->mode = VIDEO_SOUND_LANG2;
4312 v->mode = VIDEO_SOUND_LANG1;
4315 v->mode = VIDEO_SOUND_STEREO;
4318 v->mode = VIDEO_SOUND_MONO;
4321 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4322 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4328 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4329 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4330 * 0xdde enables mono and 0xccd enables sap
4332 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4333 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4334 * input/output sound connection, so both must be set for output mode.
4336 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4337 * handles this with a tda9840
4341 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4346 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4348 if (v->mode & VIDEO_SOUND_STEREO)
4351 gpio_bits(0x03,val);
4353 bttv_gpio_tracking(btv,"avermedia");
4356 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4363 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4368 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4370 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
4372 btaor(val, ~0x03, BT848_GPIO_DATA);
4374 bttv_gpio_tracking(btv,"avermedia");
4376 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4377 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4382 /* Lifetec 9415 handling */
4384 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4388 if (gpio_read() & 0x4000) {
4389 v->mode = VIDEO_SOUND_MONO;
4394 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
4396 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4398 if ((v->mode & VIDEO_SOUND_LANG1) ||
4399 (v->mode & VIDEO_SOUND_MONO))
4401 gpio_bits(0x0880, val);
4403 bttv_gpio_tracking(btv,"lt9415");
4405 /* autodetect doesn't work with this card :-( */
4406 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4407 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4412 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4414 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4416 unsigned int con = 0;
4419 gpio_inout(0x180000,0x180000);
4420 if (v->mode & VIDEO_SOUND_LANG2)
4422 if (v->mode & VIDEO_SOUND_STEREO)
4424 gpio_bits(0x180000, con);
4426 bttv_gpio_tracking(btv,"terratv");
4428 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4429 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4434 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4436 unsigned long val = 0;
4439 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4440 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
4442 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
4444 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4446 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
4449 gpio_bits(0x430000, val);
4451 bttv_gpio_tracking(btv,"winfast2000");
4454 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4455 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4460 * Dariusz Kowalewski <darekk@automex.pl>
4461 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4462 * revision 9B has on-board TDA9874A sound decoder).
4464 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4465 * will mute this cards.
4468 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4470 unsigned int val = 0;
4472 if (btv->radio_user)
4476 if (v->mode & VIDEO_SOUND_MONO) {
4479 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4480 || (v->mode & VIDEO_SOUND_STEREO)) {
4484 gpio_bits(0x03,val);
4486 bttv_gpio_tracking(btv,"pvbt878p9b");
4489 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4490 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4495 * Dariusz Kowalewski <darekk@automex.pl>
4496 * sound control for FlyVideo 2000S (with tda9874 decoder)
4497 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4500 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4502 unsigned int val = 0xffff;
4504 if (btv->radio_user)
4507 if (v->mode & VIDEO_SOUND_MONO) {
4510 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4511 || (v->mode & VIDEO_SOUND_STEREO)) {
4512 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4514 if (val != 0xffff) {
4515 gpio_bits(0x1800, val);
4517 bttv_gpio_tracking(btv,"fv2000s");
4520 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4521 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4526 * sound control for Canopus WinDVR PCI
4527 * Masaki Suzuki <masaki@btree.org>
4530 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4532 unsigned long val = 0;
4535 if (v->mode & VIDEO_SOUND_MONO)
4537 if (v->mode & VIDEO_SOUND_LANG1)
4539 if (v->mode & VIDEO_SOUND_LANG2)
4541 if (v->mode & VIDEO_SOUND_STEREO)
4544 gpio_bits(0x140000, val);
4546 bttv_gpio_tracking(btv,"windvr");
4549 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4550 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4555 * sound control for AD-TVK503
4556 * Hiroshi Takekawa <sian@big.or.jp>
4559 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4561 unsigned int con = 0xffffff;
4563 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4566 /* btor(***, BT848_GPIO_OUT_EN); */
4567 if (v->mode & VIDEO_SOUND_LANG1)
4569 if (v->mode & VIDEO_SOUND_LANG2)
4571 if (v->mode & VIDEO_SOUND_STEREO)
4573 if (v->mode & VIDEO_SOUND_MONO)
4575 if (con != 0xffffff) {
4576 gpio_bits(0x1e0000,con);
4578 bttv_gpio_tracking(btv, "adtvk503");
4581 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4582 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4586 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4588 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4589 * switch instead (CD22M3494E). This IC can have multiple active connections
4590 * between Xn (input) and Yn (output) pins. We need to clear any existing
4591 * connection prior to establish a new one, pulsing the STROBE pin.
4593 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4594 * GPIO pins are wired as:
4595 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4596 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4597 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4598 * GPIO[8] - - P3[5] (microcontroler)
4599 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4600 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4601 * GPINTR - - P3[4] (microcontroler)
4603 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4604 * configuration either directly (as we are doing) or using the microcontroler
4605 * which is also wired to I2C interface. I have no further info on the
4606 * microcontroler features, one would need to disassembly the firmware.
4607 * note: the vendor refused to give any information on this product, all
4608 * that stuff was found using a multimeter! :)
4610 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4612 /* reset all conections */
4613 gpio_bits(0x200,0x200);
4615 gpio_bits(0x200,0x000);
4618 /* create a new conection */
4619 gpio_bits(0x480,0x080);
4620 gpio_bits(0x480,0x480);
4622 gpio_bits(0x480,0x080);
4626 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4628 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4629 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4630 * chips, ten eight input analog multiplexors, a not chip and a few
4633 * 16 inputs on a secondary bracket are provided and can be selected
4634 * from each of the four capture chips. Two of the eight input
4635 * multiplexors are used to select from any of the 16 input signals.
4637 * Unsupported hardware capabilities:
4638 * . A video output monitor on the secondary bracket can be selected from
4639 * one of the 878A chips.
4640 * . Another passthrough but I haven't spent any time investigating it.
4641 * . Digital I/O (logic level connected to GPIO) is available from an
4644 * The on chip input mux should always be set to 2.
4645 * GPIO[16:19] - Video input selection
4646 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4647 * GPIO[?:?] - Digital I/O.
4649 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4650 * determined what function (if any) it provides. With the microcontroller
4651 * and sync seperator chips a guess is that it might have to do with video
4652 * switching and maybe some digital I/O.
4654 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4657 gpio_bits(0x0f0000, input << 16);
4660 static void tibetCS16_init(struct bttv *btv)
4662 /* enable gpio bits, mask obtained via btSpy */
4663 gpio_inout(0xffffff, 0x0f7fff);
4664 gpio_write(0x0f7fff);
4668 * The following routines for the Kodicom-4400r get a little mind-twisting.
4669 * There is a "master" controller and three "slave" controllers, together
4670 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4671 * The analog switch is controlled by the "master", but the detection order
4672 * of the four BT878A chips is in an order which I just don't understand.
4673 * The "master" is actually the second controller to be detected. The
4674 * logic on the board uses logical numbers for the 4 controlers, but
4675 * those numbers are different from the detection sequence. When working
4676 * with the analog switch, we need to "map" from the detection sequence
4677 * over to the board's logical controller number. This mapping sequence
4678 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4679 * unit 3, the second (which is the master) is logical unit 0, etc.
4680 * We need to maintain the status of the analog switch (which of the 16
4681 * cameras is connected to which of the 4 controllers). Rather than
4682 * add to the bttv structure for this, we use the data reserved for
4683 * the mbox (unused for this card type).
4687 * First a routine to set the analog switch, which controls which camera
4688 * is routed to which controller. The switch comprises an X-address
4689 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4690 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4691 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4692 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4693 * specified address. The idea is to set the address and data, then bring
4694 * STROBE high, and finally bring STROBE back to low.
4696 static void kodicom4400r_write(struct bttv *btv,
4697 unsigned char xaddr,
4698 unsigned char yaddr,
4699 unsigned char data) {
4702 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4703 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4704 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4705 gpio_bits(0x1ff, udata); /* strobe low */
4709 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4710 * use this routine. The routine finds the "master" for the card, maps
4711 * the controller number from the detected position over to the logical
4712 * number, writes the appropriate data to the analog switch, and housekeeps
4713 * the local copy of the switch information. The parameter 'input' is the
4714 * requested camera number (0 - 15).
4716 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4721 static unsigned char map[4] = {3, 0, 2, 1};
4723 mctlr = master[btv->c.nr];
4724 if (mctlr == NULL) { /* ignore if master not yet detected */
4727 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4729 sw_status = (char *)(&mctlr->mbox_we);
4730 xaddr = input & 0xf;
4731 /* Check if the controller/camera pair has changed, else ignore */
4732 if (sw_status[yaddr] != xaddr)
4734 /* "open" the old switch, "close" the new one, save the new */
4735 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4736 sw_status[yaddr] = xaddr;
4737 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4742 * During initialisation, we need to reset the analog switch. We
4743 * also preset the switch to map the 4 connectors on the card to the
4744 * *user's* (see above description of kodicom4400r_muxsel) channels
4747 static void kodicom4400r_init(struct bttv *btv)
4749 char *sw_status = (char *)(&btv->mbox_we);
4752 gpio_inout(0x0003ff, 0x0003ff);
4753 gpio_write(1 << 9); /* reset MUX */
4755 /* Preset camera 0 to the 4 controllers */
4756 for (ix = 0; ix < 4; ix++) {
4758 kodicom4400r_write(btv, ix, ix, 1);
4761 * Since this is the "master", we need to set up the
4762 * other three controller chips' pointers to this structure
4763 * for later use in the muxsel routine.
4765 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4767 master[btv->c.nr-1] = btv;
4768 master[btv->c.nr] = btv;
4769 master[btv->c.nr+1] = btv;
4770 master[btv->c.nr+2] = btv;
4773 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4774 * video multiplexers to provide up to 16 video inputs. These
4775 * multiplexers are controlled by the lower 8 GPIO pins of the
4776 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4778 * xxx0 is pin xxx of multiplexer U5,
4779 * yyy1 is pin yyy of multiplexer U2
4791 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4793 static const int masks[] = {
4794 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4795 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4796 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4797 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4799 gpio_write(masks[input%16]);
4801 static void picolo_tetra_init(struct bttv *btv)
4803 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4804 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4805 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4807 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4810 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4811 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4812 /*GPIO[20]&GPIO[21] used to choose the right input*/
4813 btwrite (input<<20,BT848_GPIO_DATA);
4818 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4820 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4821 * swichers to provide 16 channels to MUX0. The TDA8540's have
4822 * 4 independent outputs and as such the IVC120G also has the
4823 * optional "Monitor Out" bus. This allows the card to be looking
4824 * at one input while the monitor is looking at another.
4826 * Since I've couldn't be bothered figuring out how to add an
4827 * independant muxsel for the monitor bus, I've just set it to
4828 * whatever the card is looking at.
4830 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4831 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4833 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4834 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4835 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4836 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4840 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4841 #define I2C_TDA8540 0x90
4842 #define I2C_TDA8540_ALT1 0x92
4843 #define I2C_TDA8540_ALT2 0x94
4844 #define I2C_TDA8540_ALT3 0x96
4845 #define I2C_TDA8540_ALT4 0x98
4846 #define I2C_TDA8540_ALT5 0x9a
4847 #define I2C_TDA8540_ALT6 0x9c
4849 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4852 int key = input % 4;
4853 int matrix = input / 4;
4855 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4856 btv->c.nr, input, matrix, key);
4858 /* Handles the input selection on the TDA8540's */
4859 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4860 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4861 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4862 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4863 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4864 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4865 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4866 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4868 /* Handles the output enables on the TDA8540's */
4869 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4870 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4871 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4872 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4873 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4874 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4875 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4876 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4878 /* Selects MUX0 for input on the 878 */
4879 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4883 /* PXC200 muxsel helper
4884 * luke@syseng.anu.edu.au
4885 * another transplant
4886 * from Alessandro Rubini (rubini@linux.it)
4888 * There are 4 kinds of cards:
4889 * PXC200L which is bt848
4890 * PXC200F which is bt848 with PIC controlling mux
4891 * PXC200AL which is bt878
4892 * PXC200AF which is bt878 with PIC controlling mux
4894 #define PX_CFG_PXC200F 0x01
4895 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4896 #define PX_I2C_PIC 0x0f
4897 #define PX_PXC200A_CARDID 0x200a1295
4898 #define PX_I2C_CMD_CFG 0x00
4900 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4905 unsigned char buf[2];
4907 /* Read PIC config to determine if this is a PXC200F */
4911 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4913 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4914 /* not PXC ? do nothing */
4918 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4919 if (!(rc & PX_CFG_PXC200F)) {
4920 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4925 /* The multiplexer in the 200F is handled by the GPIO port */
4926 /* get correct mapping between inputs */
4927 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4928 /* ** not needed!? */
4931 /* make sure output pins are enabled */
4932 /* bitmask=0x30f; */
4934 /* check whether we have a PXC200A */
4935 if (btv->cardid == PX_PXC200A_CARDID) {
4936 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4937 bitmask |= 7<<4; /* the DAC */
4939 btwrite(bitmask, BT848_GPIO_OUT_EN);
4941 bitmask = btread(BT848_GPIO_DATA);
4942 if (btv->cardid == PX_PXC200A_CARDID)
4943 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4944 else /* older device */
4945 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4946 btwrite(bitmask,BT848_GPIO_DATA);
4949 * Was "to be safe, set the bt848 to input 0"
4950 * Actually, since it's ok at load time, better not messing
4951 * with these bits (on PXC200AF you need to set mux 2 here)
4953 * needed because bttv-driver sets mux before calling this function
4955 if (btv->cardid == PX_PXC200A_CARDID)
4956 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4957 else /* older device */
4958 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4960 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4963 /* ----------------------------------------------------------------------- */
4964 /* motherboard chipset specific stuff */
4966 void __devinit bttv_check_chipset(void)
4968 int pcipci_fail = 0;
4969 struct pci_dev *dev = NULL;
4971 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4973 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4975 if (pci_pci_problems & PCIPCI_VSFX)
4977 #ifdef PCIPCI_ALIMAGIK
4978 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4983 /* print warnings about any quirks found */
4985 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4987 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4989 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4992 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4995 printk(KERN_INFO "bttv: overlay forced. Use this "
4996 "option at your own risk.\n");
4999 if (UNSET != latency)
5000 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5001 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5002 PCI_DEVICE_ID_INTEL_82441, dev))) {
5004 pci_read_config_byte(dev, 0x53, &b);
5006 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5007 "bufcon=0x%02x\n",b);
5011 int __devinit bttv_handle_chipset(struct bttv *btv)
5013 unsigned char command;
5015 if (!triton1 && !vsfx && UNSET == latency)
5020 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5021 if (vsfx && btv->id >= 878)
5022 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5023 if (UNSET != latency)
5024 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5028 if (btv->id < 878) {
5029 /* bt848 (mis)uses a bit in the irq mask for etbf */
5031 btv->triton1 = BT848_INT_ETBF;
5033 /* bt878 has a bit in the pci config space for it */
5034 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5036 command |= BT878_EN_TBFX;
5038 command |= BT878_EN_VSFX;
5039 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5041 if (UNSET != latency)
5042 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blob