SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/media/video/au0828/au0828-cards.c

   1 /*
   2  *  Driver for the Auvitek USB bridge
   3  *
   4  *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include "au0828.h"
  23 #include "au0828-cards.h"
  24
  25 struct au0828_board au0828_boards[] = {
  26         [AU0828_BOARD_UNKNOWN] = {
  27                 .name   = "Unknown board",
  28         },
  29         [AU0828_BOARD_HAUPPAUGE_HVR850] = {
  30                 .name   = "Hauppauge HVR850",
  31         },
  32         [AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
  33                 .name   = "Hauppauge HVR950Q",
  34         },
  35         [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
  36                 .name   = "DViCO FusionHDTV USB",
  37         },
  38 };
  39 const unsigned int au0828_bcount = ARRAY_SIZE(au0828_boards);
  40
  41 /* Tuner callback function for au0828 boards. Currently only needed
  42  * for HVR1500Q, which has an xc5000 tuner.
  43  */
  44 int au0828_tuner_callback(void *priv, int command, int arg)
  45 {
  46         struct au0828_dev *dev = priv;
  47
  48         dprintk(1, "%s()\n", __FUNCTION__);
  49
  50         switch(dev->board) {
  51         case AU0828_BOARD_HAUPPAUGE_HVR850:
  52         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
  53         case AU0828_BOARD_DVICO_FUSIONHDTV7:
  54                 if(command == 0) {
  55                         /* Tuner Reset Command from xc5000 */
  56                         /* Drive the tuner into reset and out */
  57                         au0828_clear(dev, REG_001, 2);
  58                         mdelay(200);
  59                         au0828_set(dev, REG_001, 2);
  60                         mdelay(50);
  61                         return 0;
  62                 }
  63                 else {
  64                         printk(KERN_ERR
  65                                 "%s(): Unknown command.\n", __FUNCTION__);
  66                         return -EINVAL;
  67                 }
  68                 break;
  69         }
  70
  71         return 0; /* Should never be here */
  72 }
  73
  74 static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
  75 {
  76         struct tveeprom tv;
  77
  78         tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
  79
  80         /* Make sure we support the board model */
  81         switch (tv.model)
  82         {
  83         case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
  84                 break;
  85         default:
  86                 printk("%s: warning: unknown hauppauge model #%d\n", __FUNCTION__, tv.model);
  87                 break;
  88         }
  89
  90         printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", __FUNCTION__, tv.model);
  91 }
  92
  93
  94 void au0828_card_setup(struct au0828_dev *dev)
  95 {
  96         static u8 eeprom[256];
  97
  98         dprintk(1, "%s()\n", __FUNCTION__);
  99
 100         if (dev->i2c_rc == 0) {
 101                 dev->i2c_client.addr = 0xa0 >> 1;
 102                 tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
 103         }
 104
 105         switch(dev->board) {
 106         case AU0828_BOARD_HAUPPAUGE_HVR850:
 107         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 108                 if (dev->i2c_rc == 0)
 109                         hauppauge_eeprom(dev, eeprom+0xa0);
 110                 break;
 111         }
 112 }
 113
 114 /*
 115  * The bridge has between 8 and 12 gpios.
 116  * Regs 1 and 0 deal with output enables.
 117  * Regs 3 and 2 * deal with direction.
 118  */
 119 void au0828_gpio_setup(struct au0828_dev *dev)
 120 {
 121         dprintk(1, "%s()\n", __FUNCTION__);
 122
 123         switch(dev->board) {
 124         case AU0828_BOARD_HAUPPAUGE_HVR850:
 125         case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 126                 /* GPIO's
 127                  * 4 - CS5340
 128                  * 5 - AU8522 Demodulator
 129                  * 6 - eeprom W/P
 130                  * 9 - XC5000 Tuner
 131                  */
 132
 133                 /* Into reset */
 134                 au0828_write(dev, REG_003, 0x02);
 135                 au0828_write(dev, REG_002, 0x88 | 0x20);
 136                 au0828_write(dev, REG_001, 0x0);
 137                 au0828_write(dev, REG_000, 0x0);
 138                 msleep(100);
 139
 140                 /* Out of reset */
 141                 au0828_write(dev, REG_003, 0x02);
 142                 au0828_write(dev, REG_001, 0x02);
 143                 au0828_write(dev, REG_002, 0x88 | 0x20);
 144                 au0828_write(dev, REG_000, 0x88 | 0x20 | 0x40);
 145                 msleep(250);
 146                 break;
 147         case AU0828_BOARD_DVICO_FUSIONHDTV7:
 148                 /* GPIO's
 149                  * 6 - ?
 150                  * 8 - AU8522 Demodulator
 151                  * 9 - XC5000 Tuner
 152                  */
 153
 154                 /* Into reset */
 155                 au0828_write(dev, REG_003, 0x02);
 156                 au0828_write(dev, REG_002, 0xa0);
 157                 au0828_write(dev, REG_001, 0x0);
 158                 au0828_write(dev, REG_000, 0x0);
 159                 msleep(100);
 160
 161                 /* Out of reset */
 162                 au0828_write(dev, REG_003, 0x02);
 163                 au0828_write(dev, REG_002, 0xa0);
 164                 au0828_write(dev, REG_001, 0x02);
 165                 au0828_write(dev, REG_000, 0xa0);
 166                 msleep(250);
 167                 break;
 168         }
 169 }
 170
 171 /* table of devices that work with this driver */
 172 struct usb_device_id au0828_usb_id_table [] = {
 173         { USB_DEVICE(0x2040, 0x7200),
 174                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 175         { USB_DEVICE(0x2040, 0x7240),
 176                 .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
 177         { USB_DEVICE(0x0fe9, 0xd620),
 178                 .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
 179         { },
 180 };
 181
 182 MODULE_DEVICE_TABLE(usb, au0828_usb_id_table);