x86: cacheline_align tss_struct

[safe/jmp/linux-2.6] / drivers / media / video / Kconfig

#
# Generic video config states
#

config VIDEO_V4L2
        tristate
        depends on VIDEO_DEV && VIDEO_V4L2_COMMON
        default VIDEO_DEV && VIDEO_V4L2_COMMON

config VIDEO_V4L1
        tristate
        depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
        default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1

config VIDEOBUF_GEN
        tristate

config VIDEOBUF_DMA_SG
        depends on HAS_DMA
        select VIDEOBUF_GEN
        tristate

config VIDEOBUF_VMALLOC
        select VIDEOBUF_GEN
        tristate

config VIDEOBUF_DVB
        tristate
        select VIDEOBUF_GEN
        select VIDEOBUF_DMA_SG

config VIDEO_BTCX
        tristate

config VIDEO_IR_I2C
        tristate

config VIDEO_IR
        tristate
        depends on INPUT
        select VIDEO_IR_I2C if I2C

config VIDEO_TVEEPROM
        tristate
        depends on I2C

config VIDEO_TUNER
        tristate
        depends on MEDIA_TUNER

#
# Multimedia Video device configuration
#

menuconfig VIDEO_CAPTURE_DRIVERS
        bool "Video capture adapters"
        depends on VIDEO_V4L2
        default y
        ---help---
          Say Y here to enable selecting the video adapters for
          webcams, analog TV, and hybrid analog/digital TV.
          Some of those devices also supports FM radio.

if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2

config VIDEO_ADV_DEBUG
        bool "Enable advanced debug functionality"
        default n
        ---help---
          Say Y here to enable advanced debugging functionality on some
          V4L devices.
          In doubt, say N.

config VIDEO_HELPER_CHIPS_AUTO
        bool "Autoselect pertinent encoders/decoders and other helper chips"
        default y
        ---help---
          Most video cards may require additional modules to encode or
          decode audio/video standards. This option will autoselect
          all pertinent modules to each selected video module.

          Unselect this only if you know exactly what you are doing, since
          it may break support on some boards.

          In doubt, say Y.

#
# Encoder / Decoder module configuration
#

menu "Encoders/decoders and other helper chips"
        depends on !VIDEO_HELPER_CHIPS_AUTO

comment "Audio decoders"

config VIDEO_TVAUDIO
        tristate "Simple audio decoder chips"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for several audio decoder chips found on some bt8xx boards:
          Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
                   tea6320, tea6420, tda8425, ta8874z.
          Microchip: pic16c54 based design on ProVideo PV951 board.

          To compile this driver as a module, choose M here: the
          module will be called tvaudio.

config VIDEO_TDA7432
        tristate "Philips TDA7432 audio processor"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for tda7432 audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tda7432.

config VIDEO_TDA9840
        tristate "Philips TDA9840 audio processor"
        depends on I2C
        ---help---
          Support for tda9840 audio decoder chip found on some Zoran boards.

          To compile this driver as a module, choose M here: the
          module will be called tda9840.

config VIDEO_TDA9875
        tristate "Philips TDA9875 audio processor"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for tda9875 audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tda9875.

config VIDEO_TEA6415C
        tristate "Philips TEA6415C audio processor"
        depends on I2C
        ---help---
          Support for tea6415c audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tea6415c.

config VIDEO_TEA6420
        tristate "Philips TEA6420 audio processor"
        depends on I2C
        ---help---
          Support for tea6420 audio decoder chip found on some bt8xx boards.

          To compile this driver as a module, choose M here: the
          module will be called tea6420.

config VIDEO_MSP3400
        tristate "Micronas MSP34xx audio decoders"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Micronas MSP34xx series of audio decoders.

          To compile this driver as a module, choose M here: the
          module will be called msp3400.

config VIDEO_CS5345
        tristate "Cirrus Logic CS5345 audio ADC"
        depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
        ---help---
          Support for the Cirrus Logic CS5345 24-bit, 192 kHz
          stereo A/D converter.

          To compile this driver as a module, choose M here: the
          module will be called cs5345.

config VIDEO_CS53L32A
        tristate "Cirrus Logic CS53L32A audio ADC"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Cirrus Logic CS53L32A low voltage
          stereo A/D converter.

          To compile this driver as a module, choose M here: the
          module will be called cs53l32a.

config VIDEO_M52790
       tristate "Mitsubishi M52790 A/V switch"
       depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
       ---help---
         Support for the Mitsubishi M52790 A/V switch.

         To compile this driver as a module, choose M here: the
         module will be called m52790.

config VIDEO_TLV320AIC23B
        tristate "Texas Instruments TLV320AIC23B audio codec"
        depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
        ---help---
          Support for the Texas Instruments TLV320AIC23B audio codec.

          To compile this driver as a module, choose M here: the
          module will be called tlv320aic23b.

config VIDEO_WM8775
        tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Wolfson Microelectronics WM8775 high
          performance stereo A/D Converter with a 4 channel input mixer.

          To compile this driver as a module, choose M here: the
          module will be called wm8775.

config VIDEO_WM8739
        tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Wolfson Microelectronics WM8739
          stereo A/D Converter.

          To compile this driver as a module, choose M here: the
          module will be called wm8739.

config VIDEO_VP27SMPX
        tristate "Panasonic VP27s internal MPX"
        depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
        ---help---
          Support for the internal MPX of the Panasonic VP27s tuner.

          To compile this driver as a module, choose M here: the
          module will be called vp27smpx.

comment "Video decoders"

config VIDEO_BT819
        tristate "BT819A VideoStream decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for BT819A video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt819.

config VIDEO_BT856
        tristate "BT856 VideoStream decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for BT856 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt856.

config VIDEO_BT866
        tristate "BT866 VideoStream decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for BT866 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called bt866.

config VIDEO_KS0127
        tristate "KS0127 video decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for KS0127 video decoder.

          This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
          cards.

          To compile this driver as a module, choose M here: the
          module will be called ks0127.

config VIDEO_OV7670
        tristate "OmniVision OV7670 sensor support"
        depends on I2C && VIDEO_V4L2
        ---help---
          This is a Video4Linux2 sensor-level driver for the OmniVision
          OV7670 VGA camera.  It currently only works with the M88ALP01
          controller.

config VIDEO_TCM825X
        tristate "TCM825x camera sensor support"
        depends on I2C && VIDEO_V4L2
        ---help---
          This is a driver for the Toshiba TCM825x VGA camera sensor.
          It is used for example in Nokia N800.

config VIDEO_SAA7110
        tristate "Philips SAA7110 video decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Philips SAA7110 video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7110.

config VIDEO_SAA7111
        tristate "Philips SAA7111 video decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Philips SAA711 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called saa7111.

config VIDEO_SAA7114
        tristate "Philips SAA7114 video decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Philips SAA7114 video decoder. This driver
          is used only on Zoran driver and should be moved soon to
          SAA711x module.

          To compile this driver as a module, choose M here: the
          module will be called saa7114.

config VIDEO_SAA711X
        tristate "Philips SAA7113/4/5 video decoders"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Philips SAA7113/4/5 video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7115.

config VIDEO_SAA717X
        tristate "Philips SAA7171/3/4 audio/video decoders"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Philips SAA7171/3/4 audio/video decoders.

          To compile this driver as a module, choose M here: the
          module will be called saa717x.

config VIDEO_SAA7191
        tristate "Philips SAA7191 video decoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Philips SAA7191 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called saa7191.

config VIDEO_TVP5150
        tristate "Texas Instruments TVP5150 video decoder"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Texas Instruments TVP5150 video decoder.

          To compile this driver as a module, choose M here: the
          module will be called tvp5150.

config VIDEO_VPX3220
        tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for VPX322x video decoders.

          To compile this driver as a module, choose M here: the
          module will be called vpx3220.

comment "Video and audio decoders"

source "drivers/media/video/cx25840/Kconfig"

comment "MPEG video encoders"

config VIDEO_CX2341X
        tristate "Conexant CX2341x MPEG encoders"
        depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
        ---help---
          Support for the Conexant CX23416 MPEG encoders
          and CX23415 MPEG encoder/decoders.

          This module currently supports the encoding functions only.

          To compile this driver as a module, choose M here: the
          module will be called cx2341x.

comment "Video encoders"

config VIDEO_SAA7127
        tristate "Philips SAA7127/9 digital video encoders"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the Philips SAA7127/9 digital video encoders.

          To compile this driver as a module, choose M here: the
          module will be called saa7127.

config VIDEO_SAA7185
        tristate "Philips SAA7185 video encoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Philips SAA7185 video encoder.

          To compile this driver as a module, choose M here: the
          module will be called saa7185.

config VIDEO_ADV7170
        tristate "Analog Devices ADV7170 video encoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Analog Devices ADV7170 video encoder driver

          To compile this driver as a module, choose M here: the
          module will be called adv7170.

config VIDEO_ADV7175
        tristate "Analog Devices ADV7175 video encoder"
        depends on VIDEO_V4L1 && I2C
        ---help---
          Support for the Analog Devices ADV7175 video encoder driver

          To compile this driver as a module, choose M here: the
          module will be called adv7175.

comment "Video improvement chips"

config VIDEO_UPD64031A
        tristate "NEC Electronics uPD64031A Ghost Reduction"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the NEC Electronics uPD64031A Ghost Reduction
          video chip. It is most often found in NTSC TV cards made for
          Japan and is used to reduce the 'ghosting' effect that can
          be present in analog TV broadcasts.

          To compile this driver as a module, choose M here: the
          module will be called upd64031a.

config VIDEO_UPD64083
        tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
        depends on VIDEO_V4L2 && I2C
        ---help---
          Support for the NEC Electronics uPD64083 3-Dimensional Y/C
          separation video chip. It is used to improve the quality of
          the colors of a composite signal.

          To compile this driver as a module, choose M here: the
          module will be called upd64083.

endmenu # encoder / decoder chips

config VIDEO_VIVI
        tristate "Virtual Video Driver"
        depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
        select VIDEOBUF_VMALLOC
        default n
        ---help---
          Enables a virtual video driver. This device shows a color bar
          and a timestamp, as a real device would generate by using V4L2
          api.
          Say Y here if you want to test video apps or debug V4L devices.
          In doubt, say N.

source "drivers/media/video/bt8xx/Kconfig"

config VIDEO_SAA6588
        tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
        depends on I2C && VIDEO_BT848

        help
          Support for  Radio Data System (RDS) decoder. This allows seeing
          radio station identification transmitted using this standard.
          Currently, it works only with bt8x8 chips.

          To compile this driver as a module, choose M here: the
          module will be called saa6588.

config VIDEO_PMS
        tristate "Mediavision Pro Movie Studio Video For Linux"
        depends on ISA && VIDEO_V4L1
        help
          Say Y if you have such a thing.

          To compile this driver as a module, choose M here: the
          module will be called pms.

config VIDEO_PLANB
        tristate "PlanB Video-In on PowerMac"
        depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
        help
          PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
          input hardware. If you want to experiment with this, say Y.
          Otherwise, or if you don't understand a word, say N. See
          <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.

          Saying M will compile this driver as a module (planb).

config VIDEO_BWQCAM
        tristate "Quickcam BW Video For Linux"
        depends on PARPORT && VIDEO_V4L1
        help
          Say Y have if you the black and white version of the QuickCam
          camera. See the next option for the color version.

          To compile this driver as a module, choose M here: the
          module will be called bw-qcam.

config VIDEO_CQCAM
        tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
        depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
        help
          This is the video4linux driver for the colour version of the
          Connectix QuickCam.  If you have one of these cameras, say Y here,
          otherwise say N.  This driver does not work with the original
          monochrome QuickCam, QuickCam VC or QuickClip.  It is also available
          as a module (c-qcam).
          Read <file:Documentation/video4linux/CQcam.txt> for more information.

config VIDEO_W9966
        tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
        depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
        help
          Video4linux driver for Winbond's w9966 based Webcams.
          Currently tested with the LifeView FlyCam Supra.
          If you have one of these cameras, say Y here
          otherwise say N.
          This driver is also available as a module (w9966).

          Check out <file:Documentation/video4linux/w9966.txt> for more
          information.

config VIDEO_CPIA
        tristate "CPiA Video For Linux"
        depends on VIDEO_V4L1
        ---help---
          This is the video4linux driver for cameras based on Vision's CPiA
          (Colour Processor Interface ASIC), such as the Creative Labs Video
          Blaster Webcam II. If you have one of these cameras, say Y here
          and select parallel port and/or USB lowlevel support below,
          otherwise say N. This will not work with the Creative Webcam III.

          Please read <file:Documentation/video4linux/README.cpia> for more
          information.

          This driver is also available as a module (cpia).

config VIDEO_CPIA_PP
        tristate "CPiA Parallel Port Lowlevel Support"
        depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
        help
          This is the lowlevel parallel port support for cameras based on
          Vision's CPiA (Colour Processor Interface ASIC), such as the
          Creative Webcam II. If you have the parallel port version of one
          of these cameras, say Y here, otherwise say N. It is also available
          as a module (cpia_pp).

config VIDEO_CPIA_USB
        tristate "CPiA USB Lowlevel Support"
        depends on VIDEO_CPIA && USB
        help
          This is the lowlevel USB support for cameras based on Vision's CPiA
          (Colour Processor Interface ASIC), such as the Creative Webcam II.
          If you have the USB version of one of these cameras, say Y here,
          otherwise say N. This will not work with the Creative Webcam III.
          It is also available as a module (cpia_usb).

source "drivers/media/video/cpia2/Kconfig"

config VIDEO_SAA5246A
        tristate "SAA5246A, SAA5281 Teletext processor"
        depends on I2C && VIDEO_V4L2
        help
          Support for I2C bus based teletext using the SAA5246A or SAA5281
          chip. Useful only if you live in Europe.

          To compile this driver as a module, choose M here: the
          module will be called saa5246a.

config VIDEO_SAA5249
        tristate "SAA5249 Teletext processor"
        depends on I2C && VIDEO_V4L2
        help
          Support for I2C bus based teletext using the SAA5249 chip. At the
          moment this is only useful on some European WinTV cards.

          To compile this driver as a module, choose M here: the
          module will be called saa5249.

config TUNER_3036
        tristate "SAB3036 tuner"
        depends on I2C && VIDEO_V4L1
        help
          Say Y here to include support for Philips SAB3036 compatible tuners.
          If in doubt, say N.

config VIDEO_VINO
        tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
        depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
        select I2C_ALGO_SGI
        select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
        help
          Say Y here to build in support for the Vino video input system found
          on SGI Indy machines.

config VIDEO_STRADIS
        tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
        depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
        help
          Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
          driver for PCI.  There is a product page at
          <http://www.stradis.com/>.

config VIDEO_ZORAN_ZR36060
        tristate

config VIDEO_ZORAN
        tristate "Zoran ZR36057/36067 Video For Linux"
        depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
        help
          Say Y for support for MJPEG capture cards based on the Zoran
          36057/36067 PCI controller chipset. This includes the Iomega
          Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
          a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
          more information, check <file:Documentation/video4linux/Zoran>.

          To compile this driver as a module, choose M here: the
          module will be called zr36067.

config VIDEO_ZORAN_BUZ
        tristate "Iomega Buz support"
        depends on VIDEO_ZORAN
        select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ZORAN_ZR36060
        help
          Support for the Iomega Buz MJPEG capture/playback card.

config VIDEO_ZORAN_DC10
        tristate "Pinnacle/Miro DC10(+) support"
        depends on VIDEO_ZORAN
        select VIDEO_SAA7110
        select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ZORAN_ZR36060
        help
          Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
          card.

config VIDEO_ZORAN_DC30
        tristate "Pinnacle/Miro DC30(+) support"
        depends on VIDEO_ZORAN
        select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
        help
          Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
          card. This also supports really old DC10 cards based on the
          zr36050 MJPEG codec and zr36016 VFE.

config VIDEO_ZORAN_LML33
        tristate "Linux Media Labs LML33 support"
        depends on VIDEO_ZORAN
        select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ZORAN_ZR36060
        help
          Support for the Linux Media Labs LML33 MJPEG capture/playback
          card.

config VIDEO_ZORAN_LML33R10
        tristate "Linux Media Labs LML33R10 support"
        depends on VIDEO_ZORAN
        select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ZORAN_ZR36060
        help
          support for the Linux Media Labs LML33R10 MJPEG capture/playback
          card.

config VIDEO_ZORAN_AVS6EYES
        tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
        depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
        select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_ZORAN_ZR36060
        help
          Support for the AverMedia 6 Eyes video surveillance card.

config VIDEO_MEYE
        tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
        depends on PCI && SONY_LAPTOP && VIDEO_V4L1
        ---help---
          This is the video4linux driver for the Motion Eye camera found
          in the Vaio Picturebook laptops. Please read the material in
          <file:Documentation/video4linux/meye.txt> for more information.

          If you say Y or M here, you need to say Y or M to "Sony Laptop
          Extras" in the misc device section.

          To compile this driver as a module, choose M here: the
          module will be called meye.

source "drivers/media/video/saa7134/Kconfig"

config VIDEO_MXB
        tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
        depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_TUNER
        select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
        select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
        ---help---
          This is a video4linux driver for the 'Multimedia eXtension Board'
          TV card by Siemens-Nixdorf.

          To compile this driver as a module, choose M here: the
          module will be called mxb.

config VIDEO_DPC
        tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
        depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
        ---help---
          This is a video4linux driver for the 'dpc7146 demonstration
          board' by Philips-Semiconductors. It's the reference design
          for SAA7146 bases boards, so if you have some unsupported
          saa7146 based, analog video card, chances are good that it
          will work with this skeleton driver.

          To compile this driver as a module, choose M here: the
          module will be called dpc7146.

config VIDEO_HEXIUM_ORION
        tristate "Hexium HV-PCI6 and Orion frame grabber"
        depends on PCI && VIDEO_V4L2 && I2C
        select VIDEO_SAA7146_VV
        ---help---
          This is a video4linux driver for the Hexium HV-PCI6 and
          Orion frame grabber cards by Hexium.

          To compile this driver as a module, choose M here: the
          module will be called hexium_orion.

config VIDEO_HEXIUM_GEMINI
        tristate "Hexium Gemini frame grabber"
        depends on PCI && VIDEO_V4L2 && I2C
        select VIDEO_SAA7146_VV
        ---help---
          This is a video4linux driver for the Hexium Gemini frame
          grabber card by Hexium. Please note that the Gemini Dual
          card is *not* fully supported.

          To compile this driver as a module, choose M here: the
          module will be called hexium_gemini.

source "drivers/media/video/cx88/Kconfig"

source "drivers/media/video/cx23885/Kconfig"

source "drivers/media/video/au0828/Kconfig"

source "drivers/media/video/ivtv/Kconfig"

source "drivers/media/video/cx18/Kconfig"

config VIDEO_M32R_AR
        tristate "AR devices"
        depends on M32R && VIDEO_V4L1
        ---help---
          This is a video4linux driver for the Renesas AR (Artificial Retina)
          camera module.

config VIDEO_M32R_AR_M64278
        tristate "AR device with color module M64278(VGA)"
        depends on PLAT_M32700UT
        select VIDEO_M32R_AR
        ---help---
          This is a video4linux driver for the Renesas AR (Artificial
          Retina) with M64278E-800 camera module.
          This module supports VGA(640x480 pixels) resolutions.

          To compile this driver as a module, choose M here: the
          module will be called arv.

config VIDEO_CAFE_CCIC
        tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
        depends on PCI && I2C && VIDEO_V4L2
        select VIDEO_OV7670
        ---help---
          This is a video4linux2 driver for the Marvell 88ALP01 integrated
          CMOS camera controller.  This is the controller found on first-
          generation OLPC systems.

#
# USB Multimedia device configuration
#

menuconfig V4L_USB_DRIVERS
        bool "V4L USB devices"
        depends on USB
        default y

if V4L_USB_DRIVERS && USB

source "drivers/media/video/pvrusb2/Kconfig"

source "drivers/media/video/em28xx/Kconfig"

source "drivers/media/video/usbvision/Kconfig"

source "drivers/media/video/usbvideo/Kconfig"

source "drivers/media/video/et61x251/Kconfig"

config VIDEO_OVCAMCHIP
        tristate "OmniVision Camera Chip support"
        depends on I2C && VIDEO_V4L1
        ---help---
          Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
          This driver is intended to be used with the ov511 and w9968cf USB
          camera drivers.

          To compile this driver as a module, choose M here: the
          module will be called ovcamchip.

config USB_W9968CF
        tristate "USB W996[87]CF JPEG Dual Mode Camera support"
        depends on VIDEO_V4L1 && I2C
        select VIDEO_OVCAMCHIP
        ---help---
          Say Y here if you want support for cameras based on OV681 or
          Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.

          This driver has an optional plugin, which is distributed as a
          separate module only (released under GPL). It allows to use higher
          resolutions and framerates, but cannot be included in the official
          Linux kernel for performance purposes.

          See <file:Documentation/video4linux/w9968cf.txt> for more info.

          To compile this driver as a module, choose M here: the
          module will be called w9968cf.

config USB_OV511
        tristate "USB OV511 Camera support"
        depends on VIDEO_V4L1
        ---help---
          Say Y here if you want to connect this type of camera to your
          computer's USB port. See <file:Documentation/video4linux/ov511.txt>
          for more information and for a list of supported cameras.

          To compile this driver as a module, choose M here: the
          module will be called ov511.

config USB_SE401
        tristate "USB SE401 Camera support"
        depends on VIDEO_V4L1
        ---help---
          Say Y here if you want to connect this type of camera to your
          computer's USB port. See <file:Documentation/video4linux/se401.txt>
          for more information and for a list of supported cameras.

          To compile this driver as a module, choose M here: the
          module will be called se401.

source "drivers/media/video/sn9c102/Kconfig"

config USB_STV680
        tristate "USB STV680 (Pencam) Camera support"
        depends on VIDEO_V4L1
        ---help---
          Say Y here if you want to connect this type of camera to your
          computer's USB port. This includes the Pencam line of cameras.
          See <file:Documentation/video4linux/stv680.txt> for more information
          and for a list of supported cameras.

          To compile this driver as a module, choose M here: the
          module will be called stv680.

source "drivers/media/video/zc0301/Kconfig"

source "drivers/media/video/pwc/Kconfig"

config USB_ZR364XX
        tristate "USB ZR364XX Camera support"
        depends on VIDEO_V4L2
        ---help---
          Say Y here if you want to connect this type of camera to your
          computer's USB port.
          See <file:Documentation/video4linux/zr364xx.txt> for more info
          and list of supported cameras.

          To compile this driver as a module, choose M here: the
          module will be called zr364xx.

config USB_STKWEBCAM
        tristate "USB Syntek DC1125 Camera support"
        depends on VIDEO_V4L2 && EXPERIMENTAL
        ---help---
          Say Y here if you want to use this type of camera.
          Supported devices are typically found in some Asus laptops,
          with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
          may be supported by the stk11xx driver, from which this is
          derived, see http://stk11xx.sourceforge.net

          To compile this driver as a module, choose M here: the
          module will be called stkwebcam.

endif # V4L_USB_DRIVERS

config SOC_CAMERA
        tristate "SoC camera support"
        depends on VIDEO_V4L2 && HAS_DMA
        select VIDEOBUF_DMA_SG
        help
          SoC Camera is a common API to several cameras, not connecting
          over a bus like PCI or USB. For example some i2c camera connected
          directly to the data bus of an SoC.

config SOC_CAMERA_MT9M001
        tristate "mt9m001 support"
        depends on SOC_CAMERA && I2C
        select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
        help
          This driver supports MT9M001 cameras from Micron, monochrome
          and colour models.

config MT9M001_PCA9536_SWITCH
        bool "pca9536 datawidth switch for mt9m001"
        depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
        help
          Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
          extender to switch between 8 and 10 bit datawidth modes

config SOC_CAMERA_MT9V022
        tristate "mt9v022 support"
        depends on SOC_CAMERA && I2C
        select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
        help
          This driver supports MT9V022 cameras from Micron

config MT9V022_PCA9536_SWITCH
        bool "pca9536 datawidth switch for mt9v022"
        depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
        help
          Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
          extender to switch between 8 and 10 bit datawidth modes

config VIDEO_PXA27x
        tristate "PXA27x Quick Capture Interface driver"
        depends on VIDEO_DEV && PXA27x
        select SOC_CAMERA
        ---help---
          This is a v4l2 driver for the PXA27x Quick Capture Interface

endif # VIDEO_CAPTURE_DRIVERS