2 * Siemens Gigaset 307x driver
3 * Common header file for all connection variants
5 * Written by Stefan Eilers <Eilers.Stefan@epost.de>
6 * and Hansjoerg Lipp <hjlipp@web.de>
8 * =====================================================================
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 * =====================================================================
19 #include <linux/config.h>
20 #include <linux/kernel.h>
21 #include <linux/compiler.h>
22 #include <linux/types.h>
23 #include <linux/spinlock.h>
24 #include <linux/isdnif.h>
25 #include <linux/usb.h>
26 #include <linux/skbuff.h>
27 #include <linux/netdevice.h>
28 #include <linux/ppp_defs.h>
29 #include <linux/timer.h>
30 #include <linux/interrupt.h>
31 #include <linux/tty.h>
32 #include <linux/tty_driver.h>
33 #include <linux/list.h>
34 #include <asm/atomic.h>
36 #define GIG_VERSION {0,5,0,0}
37 #define GIG_COMPAT {0,4,0,0}
39 #define MAX_REC_PARAMS 10 /* Max. number of params in response string */
40 #define MAX_RESP_SIZE 512 /* Max. size of a response string */
41 #define HW_HDR_LEN 2 /* Header size used to store ack info */
43 #define MAX_EVENTS 64 /* size of event queue */
46 #define SBUFSIZE 4096 /* sk_buff payload size */
48 #define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
49 #define MAX_BUF_SIZE (SBUFSIZE - 2) /* Max. size of a data packet from LL */
51 /* compile time options */
54 #define GIG_MAYINITONDIAL
58 #define MAX_TIMER_INDEX 1000
59 #define MAX_SEQ_INDEX 1000
61 #define GIG_TICK 100 /* in milliseconds */
63 /* timeout values (unit: 1 sec) */
64 #define INIT_TIMEOUT 1
66 /* timeout values (unit: 0.1 sec) */
67 #define RING_TIMEOUT 3 /* for additional parameters to RING */
68 #define BAS_TIMEOUT 20 /* for response to Base USB ops */
69 #define ATRDY_TIMEOUT 3 /* for HD_READY_SEND_ATDATA */
71 #define BAS_RETRY 3 /* max. retries for base USB ops */
75 extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */
77 /* any combination of these can be given with the 'debug=' parameter to insmod,
78 * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and
81 enum debuglevel { /* up to 24 bits (atomic_t) */
82 DEBUG_REG = 0x0002, /* serial port I/O register operations */
83 DEBUG_OPEN = 0x0004, /* open/close serial port */
84 DEBUG_INTR = 0x0008, /* interrupt processing */
85 DEBUG_INTR_DUMP = 0x0010, /* Activating hexdump debug output on
86 interrupt requests, not available as
88 DEBUG_CMD = 0x00020, /* sent/received LL commands */
89 DEBUG_STREAM = 0x00040, /* application data stream I/O events */
90 DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
91 DEBUG_LLDATA = 0x00100, /* sent/received LL data */
92 DEBUG_INTR_0 = 0x00200, /* serial port interrupt processing */
93 DEBUG_DRIVER = 0x00400, /* driver structure */
94 DEBUG_HDLC = 0x00800, /* M10x HDLC processing */
95 DEBUG_WRITE = 0x01000, /* M105 data write */
96 DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */
97 DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
98 DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data
100 DEBUG_LOCK = 0x10000, /* semaphore operations */
101 DEBUG_OUTPUT = 0x20000, /* output to device */
102 DEBUG_ISO = 0x40000, /* isochronous transfers */
103 DEBUG_IF = 0x80000, /* character device operations */
104 DEBUG_USBREQ = 0x100000, /* USB communication (except payload
106 DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when
109 DEBUG_ANY = 0x3fffff, /* print message if any of the others is
113 /* missing from linux/device.h ... */
115 #define dev_notice(dev, format, arg...) \
116 dev_printk(KERN_NOTICE , dev , format , ## arg)
119 /* Kernel message macros for situations where dev_printk and friends cannot be
120 * used for lack of reliable access to a device structure.
121 * linux/usb.h already contains these but in an obsolete form which clutters
122 * the log needlessly, and according to the USB maintainer those should be
123 * removed rather than fixed anyway.
130 #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
131 format "\n" , ## arg)
132 #define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \
133 format "\n" , ## arg)
134 #define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
135 format "\n" , ## arg)
136 #define notice(format, arg...) printk(KERN_NOTICE KBUILD_MODNAME ": " \
137 format "\n" , ## arg)
139 #ifdef CONFIG_GIGASET_DEBUG
141 #define gig_dbg(level, format, arg...) \
143 if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
144 printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
147 #define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
151 #define gig_dbg(level, format, arg...) do {} while (0)
152 #define DEBUG_DEFAULT 0
156 void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
157 size_t len, const unsigned char *buf);
159 /* connection state */
161 #define ZSAU_DISCONNECT_IND 4
162 #define ZSAU_OUTGOING_CALL_PROCEEDING 1
163 #define ZSAU_PROCEEDING 1
164 #define ZSAU_CALL_DELIVERED 2
165 #define ZSAU_ACTIVE 3
167 #define ZSAU_DISCONNECT_REQ 6
168 #define ZSAU_UNKNOWN -1
170 /* USB control transfer requests */
171 #define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
172 #define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
174 /* int-in-events 3070 */
175 #define HD_B1_FLOW_CONTROL 0x80
176 #define HD_B2_FLOW_CONTROL 0x81
177 #define HD_RECEIVEATDATA_ACK (0x35) // 3070
178 // att: HD_RECEIVE>>AT<<DATA_ACK
179 #define HD_READY_SEND_ATDATA (0x36) // 3070
180 #define HD_OPEN_ATCHANNEL_ACK (0x37) // 3070
181 #define HD_CLOSE_ATCHANNEL_ACK (0x38) // 3070
182 #define HD_DEVICE_INIT_OK (0x11) // ISurf USB + 3070
183 #define HD_OPEN_B1CHANNEL_ACK (0x51) // ISurf USB + 3070
184 #define HD_OPEN_B2CHANNEL_ACK (0x52) // ISurf USB + 3070
185 #define HD_CLOSE_B1CHANNEL_ACK (0x53) // ISurf USB + 3070
186 #define HD_CLOSE_B2CHANNEL_ACK (0x54) // ISurf USB + 3070
188 #define HD_SUSPEND_END (0x61) // ISurf USB
190 #define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) // ISurf USB + 3070
192 /* control requests 3070 */
193 #define HD_OPEN_B1CHANNEL (0x23) // ISurf USB + 3070
194 #define HD_CLOSE_B1CHANNEL (0x24) // ISurf USB + 3070
195 #define HD_OPEN_B2CHANNEL (0x25) // ISurf USB + 3070
196 #define HD_CLOSE_B2CHANNEL (0x26) // ISurf USB + 3070
197 #define HD_RESET_INTERRUPT_PIPE (0x27) // ISurf USB + 3070
198 #define HD_DEVICE_INIT_ACK (0x34) // ISurf USB + 3070
199 #define HD_WRITE_ATMESSAGE (0x12) // 3070
200 #define HD_READ_ATMESSAGE (0x13) // 3070
201 #define HD_OPEN_ATCHANNEL (0x28) // 3070
202 #define HD_CLOSE_ATCHANNEL (0x29) // 3070
204 /* USB frames for isochronous transfer */
205 #define BAS_FRAMETIME 1 /* number of milliseconds between frames */
206 #define BAS_NUMFRAMES 8 /* number of frames per URB */
207 #define BAS_MAXFRAME 16 /* allocated bytes per frame */
208 #define BAS_NORMFRAME 8 /* send size without flow control */
209 #define BAS_HIGHFRAME 10 /* " " with positive flow control */
210 #define BAS_LOWFRAME 5 /* " " with negative flow control */
211 #define BAS_CORRFRAMES 4 /* flow control multiplicator */
213 #define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES)
214 /* size of isoc in buf per URB */
215 #define BAS_OUTBUFSIZE 4096 /* size of common isoc out buffer */
216 #define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isoc out buf */
219 #define BAS_OUTURBS 3
221 /* variable commands in struct bc_state */
231 /* variables in struct at_state_t */
245 #define EV_TIMEOUT -105
246 #define EV_IF_VER -106
247 #define EV_PROC_CIDMODE -107
248 #define EV_SHUTDOWN -108
249 #define EV_START -110
251 #define EV_IF_LOCK -112
252 #define EV_PROTO_L2 -113
253 #define EV_ACCEPT -114
256 #define EV_BC_OPEN -117
257 #define EV_BC_CLOSED -118
260 #define INS_command 0x0001
261 #define INS_DLE_char 0x0002
262 #define INS_byte_stuff 0x0004
263 #define INS_have_data 0x0008
264 #define INS_skip_frame 0x0010
265 #define INS_DLE_command 0x0020
266 #define INS_flag_hunt 0x0040
269 #define CHS_D_UP 0x01
270 #define CHS_B_UP 0x02
271 #define CHS_NOTIFY_LL 0x04
273 #define ICALL_REJECT 0
274 #define ICALL_ACCEPT 1
275 #define ICALL_IGNORE 2
278 #define MS_UNINITIALIZED 0
281 #define MS_SHUTDOWN 3
293 #define SM_ISDN 1 /* default */
296 struct gigaset_driver;
298 struct usb_cardstate;
299 struct ser_cardstate;
300 struct bas_cardstate;
308 int resp_code; /* RSP_XXXX */
309 int min_ConState; /* <0 => ignore */
310 int max_ConState; /* <0 => ignore */
311 int parameter; /* e.g. ZSAU_XXXX <0: ignore*/
312 int new_ConState; /* <0 => ignore */
313 int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/
314 int action[MAXACT]; /* ACT_XXXX */
315 char *command; /* NULL==none */
318 extern struct reply_t gigaset_tab_cid_m10x[];
319 extern struct reply_t gigaset_tab_nocid_m10x[];
322 unsigned char *rcvbuf; /* usb-gigaset receive buffer */
323 struct bc_state *bcs;
324 struct cardstate *cs;
327 unsigned char data[RBUFSIZE];
330 /* isochronous write buffer structure
331 * circular buffer with pad area for extraction of complete USB frames
332 * - data[read..nextread-1] is valid data already submitted to the USB subsystem
333 * - data[nextread..write-1] is valid data yet to be sent
334 * - data[write] is the next byte to write to
335 * - in byte-oriented L2 procotols, it is completely free
336 * - in bit-oriented L2 procotols, it may contain a partial byte of valid data
337 * - data[write+1..read-1] is free
338 * - wbits is the number of valid data bits in data[write], starting at the LSB
339 * - writesem is the semaphore for writing to the buffer:
340 * if writesem <= 0, data[write..read-1] is currently being written to
341 * - idle contains the byte value to repeat when the end of valid data is
342 * reached; if nextread==write (buffer contains no data to send), either the
343 * BAS_OUTBUFPAD bytes immediately before data[write] (if
344 * write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD)
345 * are also filled with that value
353 unsigned char data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
357 /* isochronous write URB context structure
358 * data to be stored along with the URB and retrieved when it is returned
359 * as completed by the USB subsystem
360 * - urb: pointer to the URB itself
361 * - bcs: pointer to the B Channel control structure
362 * - limit: end of write buffer area covered by this URB
364 struct isow_urbctx_t {
366 struct bc_state *bcs;
370 /* AT state structure
371 * data associated with the state of an ISDN connection, whether or not
372 * it is currently assigned a B channel
375 struct list_head list;
378 atomic_t timer_index;
379 unsigned long timer_expires;
381 unsigned int ConState; /* State of connection */
382 struct reply_t *replystruct;
384 int int_var[VAR_NUM]; /* see VAR_XXXX */
385 char *str_var[STR_NUM]; /* see STR_XXXX */
386 unsigned pending_commands; /* see PC_XXXX */
389 struct cardstate *cs;
390 struct bc_state *bcs;
394 unsigned char *response;
395 int resp_code; /* RSP_XXXX */
396 int type; /* RT_XXXX */
404 struct at_state_t *at_state;
407 /* This buffer holds all information about the used B-Channel */
409 struct sk_buff *tx_skb; /* Current transfer buffer to modem */
410 struct sk_buff_head squeue; /* B-Channel send Queue */
412 /* Variables for debugging .. */
413 int corrupted; /* Counter for corrupted packages */
414 int trans_down; /* Counter of packages (downstream) */
415 int trans_up; /* Counter of packages (upstream) */
417 struct at_state_t at_state;
418 unsigned long rcvbytes;
422 int inputstate; /* see INS_XXXX */
426 struct cardstate *cs;
428 unsigned chstate; /* bitmap (CHS_*) */
430 unsigned proto2; /* Layer 2 protocol (ISDN_PROTO_L2_*) */
431 char *commands[AT_NUM]; /* see AT_XXXX */
433 #ifdef CONFIG_GIGASET_DEBUG
439 /* private data of hardware drivers */
441 struct ser_bc_state *ser; /* serial hardware driver */
442 struct usb_bc_state *usb; /* usb hardware driver (m105) */
443 struct bas_bc_state *bas; /* usb hardware driver (base) */
448 struct gigaset_driver *driver;
449 unsigned minor_index;
452 const struct gigaset_ops *ops;
454 /* Stuff to handle communication */
455 wait_queue_head_t waitqueue;
457 atomic_t mode; /* see M_XXXX */
458 atomic_t mstate; /* Modem state: see MS_XXXX */
459 /* only changed by the event layer */
463 struct bc_state *bcs; /* Array of struct bc_state */
465 int onechannel; /* data and commands transmitted in one
469 struct at_state_t at_state; /* at_state_t for cid == 0 */
470 struct list_head temp_at_states;/* list of temporary "struct
471 at_state_t"s without B channel */
473 struct inbuf_t *inbuf;
475 struct cmdbuf_t *cmdbuf, *lastcmdbuf;
477 unsigned curlen, cmdbytes;
480 struct tty_struct *tty;
481 struct tasklet_struct if_wake_tasklet;
482 unsigned control_state;
487 atomic_t running; /* !=0 if events are handled */
488 atomic_t connected; /* !=0 if hardware is connected */
492 int myid; /* id for communication with LL */
495 struct reply_t *tabnocid;
496 struct reply_t *tabcid;
498 int ignoreframes; /* frames to ignore after setting up the
500 struct mutex mutex; /* locks this structure:
501 * connected is not changed,
502 * hardware_up is not changed,
503 * MState is not changed to or from
506 struct timer_list timer;
508 int dle; /* !=0 if modem commands/responses are
510 int cur_at_seq; /* sequence of AT commands being
512 int curchannel; /* channel those commands are meant
514 atomic_t commands_pending; /* flag(s) in xxx.commands_pending have
516 struct tasklet_struct event_tasklet;
517 /* tasklet for serializing AT commands.
519 * -> for modem reponses (and
520 * incoming data for M10x)
522 * -> after setting bits in
523 * xxx.at_state.pending_command
524 * (e.g. command from LL) */
525 struct tasklet_struct write_tasklet;
526 /* tasklet for serial output
527 * (not used in base driver) */
530 struct event_t events[MAX_EVENTS];
531 atomic_t ev_tail, ev_head;
534 /* current modem response */
535 unsigned char respdata[MAX_RESP_SIZE];
538 /* private data of hardware drivers */
540 struct usb_cardstate *usb; /* USB hardware driver (m105) */
541 struct ser_cardstate *ser; /* serial hardware driver */
542 struct bas_cardstate *bas; /* USB hardware driver (base) */
546 struct gigaset_driver {
547 struct list_head list;
548 spinlock_t lock; /* locks minor tables and blocked */
549 struct tty_driver *tty;
553 struct cardstate *cs;
557 const struct gigaset_ops *ops;
558 struct module *owner;
562 struct cmdbuf_t *next, *prev;
564 struct tasklet_struct *wake_tasklet;
565 unsigned char buf[0];
568 struct bas_bc_state {
569 /* isochronous output state */
572 spinlock_t isooutlock;
573 struct isow_urbctx_t isoouturbs[BAS_OUTURBS];
574 struct isow_urbctx_t *isooutdone, *isooutfree, *isooutovfl;
575 struct isowbuf_t *isooutbuf;
576 unsigned numsub; /* submitted URB counter
577 (for diagnostic messages only) */
578 struct tasklet_struct sent_tasklet;
580 /* isochronous input state */
581 spinlock_t isoinlock;
582 struct urb *isoinurbs[BAS_INURBS];
583 unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
584 struct urb *isoindone; /* completed isoc read URB */
585 int loststatus; /* status of dropped URB */
586 unsigned isoinlost; /* number of bytes lost */
587 /* state of bit unstuffing algorithm
588 (in addition to BC_state.inputstate) */
589 unsigned seqlen; /* number of '1' bits not yet
591 unsigned inbyte, inbits; /* collected bits for next byte */
593 unsigned goodbytes; /* bytes correctly received */
594 unsigned alignerrs; /* frames with incomplete byte at end */
595 unsigned fcserrs; /* FCS errors */
596 unsigned frameerrs; /* framing errors */
597 unsigned giants; /* long frames */
598 unsigned runts; /* short frames */
599 unsigned aborts; /* HDLC aborts */
600 unsigned shared0s; /* '0' bits shared between flags */
601 unsigned stolen0s; /* '0' stuff bits also serving as
603 struct tasklet_struct rcvd_tasklet;
607 /* Called from ev-layer.c/interface.c for sending AT commands to the
609 int (*write_cmd)(struct cardstate *cs,
610 const unsigned char *buf, int len,
611 struct tasklet_struct *wake_tasklet);
613 /* Called from interface.c for additional device control */
614 int (*write_room)(struct cardstate *cs);
615 int (*chars_in_buffer)(struct cardstate *cs);
616 int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]);
618 /* Called from ev-layer.c after setting up connection
619 * Should call gigaset_bchannel_up(), when finished. */
620 int (*init_bchannel)(struct bc_state *bcs);
622 /* Called from ev-layer.c after hanging up
623 * Should call gigaset_bchannel_down(), when finished. */
624 int (*close_bchannel)(struct bc_state *bcs);
626 /* Called by gigaset_initcs() for setting up bcs->hw.xxx */
627 int (*initbcshw)(struct bc_state *bcs);
629 /* Called by gigaset_freecs() for freeing bcs->hw.xxx */
630 int (*freebcshw)(struct bc_state *bcs);
632 /* Called by gigaset_stop() or gigaset_bchannel_down() for resetting
634 void (*reinitbcshw)(struct bc_state *bcs);
636 /* Called by gigaset_initcs() for setting up cs->hw.xxx */
637 int (*initcshw)(struct cardstate *cs);
639 /* Called by gigaset_freecs() for freeing cs->hw.xxx */
640 void (*freecshw)(struct cardstate *cs);
642 /* Called from common.c/interface.c for additional serial port
644 int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state,
646 int (*baud_rate)(struct cardstate *cs, unsigned cflag);
647 int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
649 /* Called from i4l.c to put an skb into the send-queue. */
650 int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
652 /* Called from ev-layer.c to process a block of data
653 * received through the common/control channel. */
654 void (*handle_input)(struct inbuf_t *inbuf);
658 /* = Common structures and definitions ======================================= */
660 /* Parser states for DLE-Event:
661 * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
663 * <EVENT>: ((a-z)* | (A-Z)* | (0-10)*)+
665 #define DLE_FLAG 0x10
667 /* ===========================================================================
668 * Functions implemented in asyncdata.c
671 /* Called from i4l.c to put an skb into the send-queue.
672 * After sending gigaset_skb_sent() should be called. */
673 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
675 /* Called from ev-layer.c to process a block of data
676 * received through the common/control channel. */
677 void gigaset_m10x_input(struct inbuf_t *inbuf);
679 /* ===========================================================================
680 * Functions implemented in isocdata.c
683 /* Called from i4l.c to put an skb into the send-queue.
684 * After sending gigaset_skb_sent() should be called. */
685 int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
687 /* Called from ev-layer.c to process a block of data
688 * received through the common/control channel. */
689 void gigaset_isoc_input(struct inbuf_t *inbuf);
691 /* Called from bas-gigaset.c to process a block of data
692 * received through the isochronous channel */
693 void gigaset_isoc_receive(unsigned char *src, unsigned count,
694 struct bc_state *bcs);
696 /* Called from bas-gigaset.c to put a block of data
697 * into the isochronous output buffer */
698 int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len);
700 /* Called from bas-gigaset.c to initialize the isochronous output buffer */
701 void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);
703 /* Called from bas-gigaset.c to retrieve a block of bytes for sending */
704 int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
706 /* ===========================================================================
707 * Functions implemented in i4l.c/gigaset.h
710 /* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
711 int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);
713 /* Called from xxx-gigaset.c to indicate completion of sending an skb */
714 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
716 /* Called from common.c/ev-layer.c to indicate events relevant to the LL */
717 int gigaset_isdn_icall(struct at_state_t *at_state);
718 int gigaset_isdn_setup_accept(struct at_state_t *at_state);
719 int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);
721 void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
722 void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);
725 static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
730 gig_dbg(DEBUG_CMD, "sending L1ERR");
731 response.driver = bcs->cs->myid;
732 response.command = ISDN_STAT_L1ERR;
733 response.arg = bcs->channel;
734 response.parm.errcode = ISDN_STAT_L1ERR_RECV;
735 bcs->cs->iif.statcallb(&response);
738 /* ===========================================================================
739 * Functions implemented in ev-layer.c
742 /* tasklet called from common.c to process queued events */
743 void gigaset_handle_event(unsigned long data);
745 /* called from isocdata.c / asyncdata.c
746 * when a complete modem response line has been received */
747 void gigaset_handle_modem_response(struct cardstate *cs);
749 /* ===========================================================================
750 * Functions implemented in proc.c
753 /* initialize sysfs for device */
754 void gigaset_init_dev_sysfs(struct cardstate *cs);
755 void gigaset_free_dev_sysfs(struct cardstate *cs);
757 /* ===========================================================================
758 * Functions implemented in common.c/gigaset.h
761 void gigaset_bcs_reinit(struct bc_state *bcs);
762 void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
763 struct cardstate *cs, int cid);
764 int gigaset_get_channel(struct bc_state *bcs);
765 void gigaset_free_channel(struct bc_state *bcs);
766 int gigaset_get_channels(struct cardstate *cs);
767 void gigaset_free_channels(struct cardstate *cs);
768 void gigaset_block_channels(struct cardstate *cs);
770 /* Allocate and initialize driver structure. */
771 struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
772 const char *procname,
774 const char *devfsname,
775 const struct gigaset_ops *ops,
776 struct module *owner);
778 /* Deallocate driver structure. */
779 void gigaset_freedriver(struct gigaset_driver *drv);
780 void gigaset_debugdrivers(void);
781 struct cardstate *gigaset_get_cs_by_minor(unsigned minor);
782 struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
783 struct cardstate *gigaset_get_cs_by_id(int id);
785 /* For drivers without fixed assignment device<->cardstate (usb) */
786 struct cardstate *gigaset_getunassignedcs(struct gigaset_driver *drv);
787 void gigaset_unassign(struct cardstate *cs);
788 void gigaset_blockdriver(struct gigaset_driver *drv);
790 /* Allocate and initialize card state. Calls hardware dependent
791 gigaset_init[b]cs(). */
792 struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
793 int onechannel, int ignoreframes,
794 int cidmode, const char *modulename);
796 /* Free card state. Calls hardware dependent gigaset_free[b]cs(). */
797 void gigaset_freecs(struct cardstate *cs);
799 /* Tell common.c that hardware and driver are ready. */
800 int gigaset_start(struct cardstate *cs);
802 /* Tell common.c that the device is not present any more. */
803 void gigaset_stop(struct cardstate *cs);
805 /* Tell common.c that the driver is being unloaded. */
806 void gigaset_shutdown(struct cardstate *cs);
808 /* Tell common.c that an skb has been sent. */
809 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
811 /* Append event to the queue.
812 * Returns NULL on failure or a pointer to the event on success.
813 * ptr must be kmalloc()ed (and not be freed by the caller).
815 struct event_t *gigaset_add_event(struct cardstate *cs,
816 struct at_state_t *at_state, int type,
817 void *ptr, int parameter, void *arg);
819 /* Called on CONFIG1 command from frontend. */
820 int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode
822 /* cs->lock must not be locked */
823 static inline void gigaset_schedule_event(struct cardstate *cs)
826 spin_lock_irqsave(&cs->lock, flags);
827 if (atomic_read(&cs->running))
828 tasklet_schedule(&cs->event_tasklet);
829 spin_unlock_irqrestore(&cs->lock, flags);
832 /* Tell common.c that B channel has been closed. */
833 /* cs->lock must not be locked */
834 static inline void gigaset_bchannel_down(struct bc_state *bcs)
836 gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);
838 gig_dbg(DEBUG_CMD, "scheduling BC_CLOSED");
839 gigaset_schedule_event(bcs->cs);
842 /* Tell common.c that B channel has been opened. */
843 /* cs->lock must not be locked */
844 static inline void gigaset_bchannel_up(struct bc_state *bcs)
846 gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);
848 gig_dbg(DEBUG_CMD, "scheduling BC_OPEN");
849 gigaset_schedule_event(bcs->cs);
852 /* handling routines for sk_buff */
853 /* ============================= */
855 /* private version of __skb_put()
856 * append 'len' bytes to the content of 'skb', already knowing that the
857 * existing buffer can accomodate them
858 * returns a pointer to the location where the new bytes should be copied to
859 * This function does not take any locks so it must be called with the
860 * appropriate locks held only.
862 static inline unsigned char *gigaset_skb_put_quick(struct sk_buff *skb,
865 unsigned char *tmp = skb->tail;
866 /*SKB_LINEAR_ASSERT(skb);*/ /* not needed here */
872 /* pass received skb to LL
873 * Warning: skb must not be accessed anymore!
875 static inline void gigaset_rcv_skb(struct sk_buff *skb,
876 struct cardstate *cs,
877 struct bc_state *bcs)
879 cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
883 /* handle reception of corrupted skb
884 * Warning: skb must not be accessed anymore!
886 static inline void gigaset_rcv_error(struct sk_buff *procskb,
887 struct cardstate *cs,
888 struct bc_state *bcs)
891 dev_kfree_skb(procskb);
897 gigaset_isdn_rcv_err(bcs);
902 /* bitwise byte inversion table */
903 extern __u8 gigaset_invtab[]; /* in common.c */
905 /* append received bytes to inbuf */
906 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
909 /* ===========================================================================
910 * Functions implemented in interface.c
913 /* initialize interface */
914 void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
915 const char *devname, const char *devfsname);
916 /* release interface */
917 void gigaset_if_freedriver(struct gigaset_driver *drv);
919 void gigaset_if_init(struct cardstate *cs);
921 void gigaset_if_free(struct cardstate *cs);
922 /* device received data */
923 void gigaset_if_receive(struct cardstate *cs,
924 unsigned char *buffer, size_t len);