151844fcbb079555979669f0c72cf6169815426b
[safe/jmp/linux-2.6] / drivers / ide / pci / cs5520.c
1 /*
2  *      IDE tuning and bus mastering support for the CS5510/CS5520
3  *      chipsets
4  *
5  *      The CS5510/CS5520 are slightly unusual devices. Unlike the 
6  *      typical IDE controllers they do bus mastering with the drive in
7  *      PIO mode and smarter silicon.
8  *
9  *      The practical upshot of this is that we must always tune the
10  *      drive for the right PIO mode. We must also ignore all the blacklists
11  *      and the drive bus mastering DMA information.
12  *
13  *      *** This driver is strictly experimental ***
14  *
15  *      (c) Copyright Red Hat Inc 2002
16  * 
17  * This program is free software; you can redistribute it and/or modify it
18  * under the terms of the GNU General Public License as published by the
19  * Free Software Foundation; either version 2, or (at your option) any
20  * later version.
21  *
22  * This program is distributed in the hope that it will be useful, but
23  * WITHOUT ANY WARRANTY; without even the implied warranty of
24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
25  * General Public License for more details.
26  *
27  * For the avoidance of doubt the "preferred form" of this code is one which
28  * is in an open non patent encumbered format. Where cryptographic key signing
29  * forms part of the process of creating an executable the information
30  * including keys needed to generate an equivalently functional executable
31  * are deemed to be part of the source code.
32  *
33  */
34  
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/kernel.h>
38 #include <linux/hdreg.h>
39 #include <linux/init.h>
40 #include <linux/pci.h>
41 #include <linux/ide.h>
42 #include <linux/dma-mapping.h>
43
44 #define DRV_NAME "cs5520"
45
46 struct pio_clocks
47 {
48         int address;
49         int assert;
50         int recovery;
51 };
52
53 static struct pio_clocks cs5520_pio_clocks[]={
54         {3, 6, 11},
55         {2, 5, 6},
56         {1, 4, 3},
57         {1, 3, 2},
58         {1, 2, 1}
59 };
60
61 static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
62 {
63         ide_hwif_t *hwif = HWIF(drive);
64         struct pci_dev *pdev = to_pci_dev(hwif->dev);
65         int controller = drive->dn > 1 ? 1 : 0;
66
67         /* 8bit CAT/CRT - 8bit command timing for channel */
68         pci_write_config_byte(pdev, 0x62 + controller, 
69                 (cs5520_pio_clocks[pio].recovery << 4) |
70                 (cs5520_pio_clocks[pio].assert));
71
72         /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
73
74         /* FIXME: should these use address ? */
75         /* Data read timing */
76         pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
77                 (cs5520_pio_clocks[pio].recovery << 4) |
78                 (cs5520_pio_clocks[pio].assert));
79         /* Write command timing */
80         pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
81                 (cs5520_pio_clocks[pio].recovery << 4) |
82                 (cs5520_pio_clocks[pio].assert));
83 }
84
85 static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
86 {
87         printk(KERN_ERR "cs55x0: bad ide timing.\n");
88
89         cs5520_set_pio_mode(drive, 0);
90 }
91
92 static const struct ide_port_ops cs5520_port_ops = {
93         .set_pio_mode           = cs5520_set_pio_mode,
94         .set_dma_mode           = cs5520_set_dma_mode,
95 };
96
97 static const struct ide_port_info cyrix_chipset __devinitdata = {
98         .name           = DRV_NAME,
99         .enablebits     = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
100         .port_ops       = &cs5520_port_ops,
101         .host_flags     = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
102         .pio_mask       = ATA_PIO4,
103 };
104
105 /*
106  *      The 5510/5520 are a bit weird. They don't quite set up the way
107  *      the PCI helper layer expects so we must do much of the set up 
108  *      work longhand.
109  */
110  
111 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
112 {
113         const struct ide_port_info *d = &cyrix_chipset;
114         hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
115
116         ide_setup_pci_noise(dev, d);
117
118         /* We must not grab the entire device, it has 'ISA' space in its
119          * BARS too and we will freak out other bits of the kernel
120          */
121         if (pci_enable_device_io(dev)) {
122                 printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
123                 return -ENODEV;
124         }
125         pci_set_master(dev);
126         if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
127                 printk(KERN_WARNING "%s: No suitable DMA available.\n",
128                         d->name);
129                 return -ENODEV;
130         }
131
132         /*
133          *      Now the chipset is configured we can let the core
134          *      do all the device setup for us
135          */
136
137         ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]);
138
139         return ide_host_add(d, hws, NULL);
140 }
141
142 static const struct pci_device_id cs5520_pci_tbl[] = {
143         { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 },
144         { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 },
145         { 0, },
146 };
147 MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
148
149 static struct pci_driver driver = {
150         .name           = "Cyrix_IDE",
151         .id_table       = cs5520_pci_tbl,
152         .probe          = cs5520_init_one,
153 };
154
155 static int __init cs5520_ide_init(void)
156 {
157         return ide_pci_register_driver(&driver);
158 }
159
160 module_init(cs5520_ide_init);
161
162 MODULE_AUTHOR("Alan Cox");
163 MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
164 MODULE_LICENSE("GPL");