ide: add struct ide_io_ports (take 3)
[safe/jmp/linux-2.6] / drivers / ide / mips / swarm.c
1 /*
2  * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
3  * Copyright (C) 2004 MontaVista Software Inc.
4  *      Author: Manish Lachwani, mlachwani@mvista.com
5  * Copyright (C) 2004  MIPS Technologies, Inc.  All rights reserved.
6  *      Author: Maciej W. Rozycki <macro@mips.com>
7  * Copyright (c) 2006  Maciej W. Rozycki
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License
11  * as published by the Free Software Foundation; either version 2
12  * of the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
22  */
23
24 /*
25  *  Derived loosely from ide-pmac.c, so:
26  *  Copyright (C) 1998 Paul Mackerras.
27  *  Copyright (C) 1995-1998 Mark Lord
28  */
29
30 /*
31  * Boards with SiByte processors so far have supported IDE devices via
32  * the Generic Bus, PCI bus, and built-in PCMCIA interface.  In all
33  * cases, byte-swapping must be avoided for these devices (whereas
34  * other PCI devices, for example, will require swapping).  Any
35  * SiByte-targetted kernel including IDE support will include this
36  * file.  Probing of a Generic Bus for an IDE device is controlled by
37  * the definition of "SIBYTE_HAVE_IDE", which is provided by
38  * <asm/sibyte/board.h> for Broadcom boards.
39  */
40
41 #include <linux/ide.h>
42 #include <linux/ioport.h>
43 #include <linux/kernel.h>
44 #include <linux/types.h>
45 #include <linux/platform_device.h>
46
47 #include <asm/io.h>
48
49 #include <asm/sibyte/board.h>
50 #include <asm/sibyte/sb1250_genbus.h>
51 #include <asm/sibyte/sb1250_regs.h>
52
53 #define DRV_NAME "ide-swarm"
54
55 static char swarm_ide_string[] = DRV_NAME;
56
57 static struct resource swarm_ide_resource = {
58         .name   = "SWARM GenBus IDE",
59         .flags  = IORESOURCE_MEM,
60 };
61
62 static struct platform_device *swarm_ide_dev;
63
64 /*
65  * swarm_ide_probe - if the board header indicates the existence of
66  * Generic Bus IDE, allocate a HWIF for it.
67  */
68 static int __devinit swarm_ide_probe(struct device *dev)
69 {
70         ide_hwif_t *hwif;
71         u8 __iomem *base;
72         phys_t offset, size;
73         int i;
74         u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
75
76         if (!SIBYTE_HAVE_IDE)
77                 return -ENODEV;
78
79         hwif = ide_find_port();
80         if (hwif == NULL) {
81                 printk(KERN_ERR DRV_NAME ": no free slot for interface\n");
82                 return -ENOMEM;
83         }
84
85         base = ioremap(A_IO_EXT_BASE, 0x800);
86         offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
87         size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
88         iounmap(base);
89
90         offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
91         size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
92         if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
93                 printk(KERN_INFO DRV_NAME
94                        ": IDE interface at GenBus disabled\n");
95                 return -EBUSY;
96         }
97
98         printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
99                IDE_CS);
100
101         swarm_ide_resource.start = offset;
102         swarm_ide_resource.end = offset + size - 1;
103         if (request_resource(&iomem_resource, &swarm_ide_resource)) {
104                 printk(KERN_ERR DRV_NAME
105                        ": can't request I/O memory resource\n");
106                 return -EBUSY;
107         }
108
109         base = ioremap(offset, size);
110
111         /* Setup MMIO ops.  */
112         default_hwif_mmiops(hwif);
113
114         hwif->chipset = ide_generic;
115
116         for (i = 0; i <= 7; i++)
117                 hwif->io_ports_array[i] =
118                                 (unsigned long)(base + ((0x1f0 + i) << 5));
119         hwif->io_ports.ctl_addr =
120                                 (unsigned long)(base + (0x3f6 << 5));
121         hwif->irq = K_INT_GB_IDE;
122
123         idx[0] = hwif->index;
124
125         ide_device_add(idx, NULL);
126
127         dev_set_drvdata(dev, hwif);
128
129         return 0;
130 }
131
132 static struct device_driver swarm_ide_driver = {
133         .name   = swarm_ide_string,
134         .bus    = &platform_bus_type,
135         .probe  = swarm_ide_probe,
136 };
137
138 static void swarm_ide_platform_release(struct device *device)
139 {
140         struct platform_device *pldev;
141
142         /* free device */
143         pldev = to_platform_device(device);
144         kfree(pldev);
145 }
146
147 static int __devinit swarm_ide_init_module(void)
148 {
149         struct platform_device *pldev;
150         int err;
151
152         printk(KERN_INFO "SWARM IDE driver\n");
153
154         if (driver_register(&swarm_ide_driver)) {
155                 printk(KERN_ERR "Driver registration failed\n");
156                 err = -ENODEV;
157                 goto out;
158         }
159
160         if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) {
161                 err = -ENOMEM;
162                 goto out_unregister_driver;
163         }
164
165         pldev->name             = swarm_ide_string;
166         pldev->id               = 0;
167         pldev->dev.release      = swarm_ide_platform_release;
168
169         if (platform_device_register(pldev)) {
170                 err = -ENODEV;
171                 goto out_free_pldev;
172         }
173
174         if (!pldev->dev.driver) {
175                 /*
176                  * The driver was not bound to this device, there was
177                  * no hardware at this address. Unregister it, as the
178                  * release fuction will take care of freeing the
179                  * allocated structure
180                  */
181                 platform_device_unregister (pldev);
182         }
183
184         swarm_ide_dev = pldev;
185
186         return 0;
187
188 out_free_pldev:
189         kfree(pldev);
190
191 out_unregister_driver:
192         driver_unregister(&swarm_ide_driver);
193 out:
194         return err;
195 }
196
197 module_init(swarm_ide_init_module);