2 i2c Support for Apple SMU Controller
4 Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
5 <benh@kernel.crashing.org>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/module.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/i2c.h>
27 #include <linux/init.h>
28 #include <linux/device.h>
29 #include <linux/platform_device.h>
31 #include <asm/pmac_low_i2c.h>
33 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
34 MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
35 MODULE_LICENSE("GPL");
38 * SMBUS-type transfer entrypoint
40 static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
46 union i2c_smbus_data* data)
48 struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
50 int read = (read_write == I2C_SMBUS_READ);
51 int addrdir = (addr << 1) | read;
52 int mode, subsize, len;
57 if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
58 mode = pmac_i2c_mode_std;
62 mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
73 case I2C_SMBUS_BYTE_DATA:
77 case I2C_SMBUS_WORD_DATA:
79 local[0] = data->word & 0xff;
80 local[1] = (data->word >> 8) & 0xff;
86 /* Note that these are broken vs. the expected smbus API where
87 * on reads, the length is actually returned from the function,
88 * but I think the current API makes no sense and I don't want
89 * any driver that I haven't verified for correctness to go
90 * anywhere near a pmac i2c bus anyway ...
92 * I'm also not completely sure what kind of phases to do between
93 * the actual command and the data (what I am _supposed_ to do that
94 * is). For now, I assume writes are a single stream and reads have
95 * a repeat start/addr phase (but not stop in between)
97 case I2C_SMBUS_BLOCK_DATA:
99 len = data->block[0] + 1;
101 case I2C_SMBUS_I2C_BLOCK_DATA:
102 buf = &data->block[1];
103 len = data->block[0];
110 rc = pmac_i2c_open(bus, 0);
112 dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
116 rc = pmac_i2c_setmode(bus, mode);
118 dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
123 rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
126 "I2C transfer at 0x%02x failed, size %d, err %d\n",
127 addrdir >> 1, size, rc);
131 if (size == I2C_SMBUS_WORD_DATA && read) {
132 data->word = ((u16)local[1]) << 8;
133 data->word |= local[0];
142 * Generic i2c master transfer entrypoint. This driver only support single
143 * messages (for "lame i2c" transfers). Anything else should use the smbus
146 static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
147 struct i2c_msg *msgs,
150 struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
157 "Multi-message I2C transactions not supported\n");
161 if (msgs->flags & I2C_M_TEN)
163 read = (msgs->flags & I2C_M_RD) != 0;
164 addrdir = (msgs->addr << 1) | read;
166 rc = pmac_i2c_open(bus, 0);
168 dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
171 rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
173 dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
174 pmac_i2c_mode_std, rc);
177 rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
179 dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
180 addrdir & 1 ? "read from" : "write to", addrdir >> 1,
184 return rc < 0 ? rc : 1;
187 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
189 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
190 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
191 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
194 /* For now, we only handle smbus */
195 static const struct i2c_algorithm i2c_powermac_algorithm = {
196 .smbus_xfer = i2c_powermac_smbus_xfer,
197 .master_xfer = i2c_powermac_master_xfer,
198 .functionality = i2c_powermac_func,
202 static int __devexit i2c_powermac_remove(struct platform_device *dev)
204 struct i2c_adapter *adapter = platform_get_drvdata(dev);
207 rc = i2c_del_adapter(adapter);
208 /* We aren't that prepared to deal with this... */
211 "i2c-powermac.c: Failed to remove bus %s !\n",
213 platform_set_drvdata(dev, NULL);
214 memset(adapter, 0, sizeof(*adapter));
220 static int __devinit i2c_powermac_probe(struct platform_device *dev)
222 struct pmac_i2c_bus *bus = dev->dev.platform_data;
223 struct device_node *parent = NULL;
224 struct i2c_adapter *adapter;
225 const char *basename;
230 adapter = pmac_i2c_get_adapter(bus);
232 /* Ok, now we need to make up a name for the interface that will
233 * match what we used to do in the past, that is basically the
234 * controller's parent device node for keywest. PMU didn't have a
235 * naming convention and SMU has a different one
237 switch(pmac_i2c_get_type(bus)) {
238 case pmac_i2c_bus_keywest:
239 parent = of_get_parent(pmac_i2c_get_controller(bus));
242 basename = parent->name;
244 case pmac_i2c_bus_pmu:
247 case pmac_i2c_bus_smu:
248 /* This is not what we used to do but I'm fixing drivers at
249 * the same time as this change
256 snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
257 pmac_i2c_get_channel(bus));
260 platform_set_drvdata(dev, adapter);
261 adapter->algo = &i2c_powermac_algorithm;
262 i2c_set_adapdata(adapter, bus);
263 adapter->dev.parent = &dev->dev;
264 rc = i2c_add_adapter(adapter);
266 printk(KERN_ERR "i2c-powermac: Adapter %s registration "
267 "failed\n", adapter->name);
268 memset(adapter, 0, sizeof(*adapter));
271 printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
273 if (!strncmp(basename, "uni-n", 5)) {
274 struct device_node *np;
276 struct i2c_board_info info;
278 /* Instantiate I2C motion sensor if present */
279 np = of_find_node_by_name(NULL, "accelerometer");
280 if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
281 (prop = of_get_property(np, "reg", NULL))) {
285 /* look for bus either using "reg" or by path */
286 tmp_bus = strstr(np->full_name, "/i2c-bus@");
288 i2c_bus = *(tmp_bus + 9) - '0';
290 i2c_bus = ((*prop) >> 8) & 0x0f;
292 if (pmac_i2c_get_channel(bus) == i2c_bus) {
293 memset(&info, 0, sizeof(struct i2c_board_info));
294 info.addr = ((*prop) & 0xff) >> 1;
295 strlcpy(info.type, "ams", I2C_NAME_SIZE);
296 i2c_new_device(adapter, &info);
305 /* work with hotplug and coldplug */
306 MODULE_ALIAS("platform:i2c-powermac");
308 static struct platform_driver i2c_powermac_driver = {
309 .probe = i2c_powermac_probe,
310 .remove = __devexit_p(i2c_powermac_remove),
312 .name = "i2c-powermac",
313 .bus = &platform_bus_type,
317 static int __init i2c_powermac_init(void)
319 platform_driver_register(&i2c_powermac_driver);
324 static void __exit i2c_powermac_cleanup(void)
326 platform_driver_unregister(&i2c_powermac_driver);
329 module_init(i2c_powermac_init);
330 module_exit(i2c_powermac_cleanup);