SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/hwmon/thmc50.c

   1 /*
   2     thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
   3              monitoring
   4     Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
   5     Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
   6     Philip Edelbrock <phil@netroedge.com>
   7
   8     This program is free software; you can redistribute it and/or modify
   9     it under the terms of the GNU General Public License as published by
  10     the Free Software Foundation; either version 2 of the License, or
  11     (at your option) any later version.
  12
  13     This program is distributed in the hope that it will be useful,
  14     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16     GNU General Public License for more details.
  17
  18     You should have received a copy of the GNU General Public License
  19     along with this program; if not, write to the Free Software
  20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/slab.h>
  26 #include <linux/i2c.h>
  27 #include <linux/hwmon.h>
  28 #include <linux/hwmon-sysfs.h>
  29 #include <linux/err.h>
  30 #include <linux/mutex.h>
  31
  32 MODULE_LICENSE("GPL");
  33
  34 /* Addresses to scan */
  35 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
  36
  37 /* Insmod parameters */
  38 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
  39 I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
  40                         "to enable 3rd temperature (ADM1022 only)");
  41
  42 /* Many THMC50 constants specified below */
  43
  44 /* The THMC50 registers */
  45 #define THMC50_REG_CONF                         0x40
  46 #define THMC50_REG_COMPANY_ID                   0x3E
  47 #define THMC50_REG_DIE_CODE                     0x3F
  48 #define THMC50_REG_ANALOG_OUT                   0x19
  49
  50 const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
  51 const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
  52 const static u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
  53
  54 #define THMC50_REG_CONF_nFANOFF                 0x20
  55
  56 /* Each client has this additional data */
  57 struct thmc50_data {
  58         struct i2c_client client;
  59         struct class_device *class_dev;
  60
  61         struct mutex update_lock;
  62         enum chips type;
  63         unsigned long last_updated;     /* In jiffies */
  64         char has_temp3;         /* !=0 if it is ADM1022 in temp3 mode */
  65         char valid;             /* !=0 if following fields are valid */
  66
  67         /* Register values */
  68         s8 temp_input[3];
  69         s8 temp_max[3];
  70         s8 temp_min[3];
  71         u8 analog_out;
  72 };
  73
  74 static int thmc50_attach_adapter(struct i2c_adapter *adapter);
  75 static int thmc50_detach_client(struct i2c_client *client);
  76 static void thmc50_init_client(struct i2c_client *client);
  77 static struct thmc50_data *thmc50_update_device(struct device *dev);
  78
  79 static struct i2c_driver thmc50_driver = {
  80         .driver = {
  81                 .name = "thmc50",
  82         },
  83         .attach_adapter = thmc50_attach_adapter,
  84         .detach_client = thmc50_detach_client,
  85 };
  86
  87 static ssize_t show_analog_out(struct device *dev,
  88                                struct device_attribute *attr, char *buf)
  89 {
  90         struct thmc50_data *data = thmc50_update_device(dev);
  91         return sprintf(buf, "%d\n", data->analog_out);
  92 }
  93
  94 static ssize_t set_analog_out(struct device *dev,
  95                               struct device_attribute *attr,
  96                               const char *buf, size_t count)
  97 {
  98         struct i2c_client *client = to_i2c_client(dev);
  99         struct thmc50_data *data = i2c_get_clientdata(client);
 100         int tmp = simple_strtoul(buf, NULL, 10);
 101         int config;
 102
 103         mutex_lock(&data->update_lock);
 104         data->analog_out = SENSORS_LIMIT(tmp, 0, 255);
 105         i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 106                                   data->analog_out);
 107
 108         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 109         if (data->analog_out == 0)
 110                 config &= ~THMC50_REG_CONF_nFANOFF;
 111         else
 112                 config |= THMC50_REG_CONF_nFANOFF;
 113         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 114
 115         mutex_unlock(&data->update_lock);
 116         return count;
 117 }
 118
 119 /* There is only one PWM mode = DC */
 120 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
 121                              char *buf)
 122 {
 123         return sprintf(buf, "0\n");
 124 }
 125
 126 /* Temperatures */
 127 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 128                          char *buf)
 129 {
 130         int nr = to_sensor_dev_attr(attr)->index;
 131         struct thmc50_data *data = thmc50_update_device(dev);
 132         return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
 133 }
 134
 135 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 136                              char *buf)
 137 {
 138         int nr = to_sensor_dev_attr(attr)->index;
 139         struct thmc50_data *data = thmc50_update_device(dev);
 140         return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
 141 }
 142
 143 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 144                             const char *buf, size_t count)
 145 {
 146         int nr = to_sensor_dev_attr(attr)->index;
 147         struct i2c_client *client = to_i2c_client(dev);
 148         struct thmc50_data *data = i2c_get_clientdata(client);
 149         int val = simple_strtol(buf, NULL, 10);
 150
 151         mutex_lock(&data->update_lock);
 152         data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 153         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
 154                                   data->temp_min[nr]);
 155         mutex_unlock(&data->update_lock);
 156         return count;
 157 }
 158
 159 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 160                              char *buf)
 161 {
 162         int nr = to_sensor_dev_attr(attr)->index;
 163         struct thmc50_data *data = thmc50_update_device(dev);
 164         return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
 165 }
 166
 167 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 168                             const char *buf, size_t count)
 169 {
 170         int nr = to_sensor_dev_attr(attr)->index;
 171         struct i2c_client *client = to_i2c_client(dev);
 172         struct thmc50_data *data = i2c_get_clientdata(client);
 173         int val = simple_strtol(buf, NULL, 10);
 174
 175         mutex_lock(&data->update_lock);
 176         data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 177         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
 178                                   data->temp_max[nr]);
 179         mutex_unlock(&data->update_lock);
 180         return count;
 181 }
 182
 183 #define temp_reg(offset)                                                \
 184 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
 185                         NULL, offset - 1);                              \
 186 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
 187                         show_temp_min, set_temp_min, offset - 1);       \
 188 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
 189                         show_temp_max, set_temp_max, offset - 1);
 190
 191 temp_reg(1);
 192 temp_reg(2);
 193 temp_reg(3);
 194
 195 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
 196                           set_analog_out, 0);
 197 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
 198
 199 static struct attribute *thmc50_attributes[] = {
 200         &sensor_dev_attr_temp1_max.dev_attr.attr,
 201         &sensor_dev_attr_temp1_min.dev_attr.attr,
 202         &sensor_dev_attr_temp1_input.dev_attr.attr,
 203         &sensor_dev_attr_temp2_max.dev_attr.attr,
 204         &sensor_dev_attr_temp2_min.dev_attr.attr,
 205         &sensor_dev_attr_temp2_input.dev_attr.attr,
 206         &sensor_dev_attr_pwm1.dev_attr.attr,
 207         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
 208         NULL
 209 };
 210
 211 static const struct attribute_group thmc50_group = {
 212         .attrs = thmc50_attributes,
 213 };
 214
 215 /* for ADM1022 3rd temperature mode */
 216 static struct attribute *adm1022_attributes[] = {
 217         &sensor_dev_attr_temp3_max.dev_attr.attr,
 218         &sensor_dev_attr_temp3_min.dev_attr.attr,
 219         &sensor_dev_attr_temp3_input.dev_attr.attr,
 220         NULL
 221 };
 222
 223 static const struct attribute_group adm1022_group = {
 224         .attrs = adm1022_attributes,
 225 };
 226
 227 static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind)
 228 {
 229         unsigned company;
 230         unsigned revision;
 231         unsigned config;
 232         struct i2c_client *client;
 233         struct thmc50_data *data;
 234         struct device *dev;
 235         int err = 0;
 236         const char *type_name = "";
 237
 238         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 239                 pr_debug("thmc50: detect failed, "
 240                          "smbus byte data not supported!\n");
 241                 goto exit;
 242         }
 243
 244         /* OK. For now, we presume we have a valid client. We now create the
 245            client structure, even though we cannot fill it completely yet.
 246            But it allows us to access thmc50 registers. */
 247         if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) {
 248                 pr_debug("thmc50: detect failed, kzalloc failed!\n");
 249                 err = -ENOMEM;
 250                 goto exit;
 251         }
 252
 253         client = &data->client;
 254         i2c_set_clientdata(client, data);
 255         client->addr = address;
 256         client->adapter = adapter;
 257         client->driver = &thmc50_driver;
 258         dev = &client->dev;
 259
 260         pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 261                  client->addr, i2c_adapter_id(client->adapter));
 262
 263         /* Now, we do the remaining detection. */
 264         company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 265         revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 266         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 267
 268         if (kind == 0)
 269                 kind = thmc50;
 270         else if (kind < 0) {
 271                 err = -ENODEV;
 272                 if (revision >= 0xc0 && ((config & 0x10) == 0)) {
 273                         if (company == 0x49) {
 274                                 kind = thmc50;
 275                                 err = 0;
 276                         } else if (company == 0x41) {
 277                                 kind = adm1022;
 278                                 err = 0;
 279                         }
 280                 }
 281         }
 282         if (err == -ENODEV) {
 283                 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
 284                 goto exit_free;
 285         }
 286         pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 287                  type_name, (revision >> 4) - 0xc, revision & 0xf);
 288         data->type = kind;
 289
 290         if (kind == thmc50)
 291                 type_name = "thmc50";
 292         else if (kind == adm1022) {
 293                 int id = i2c_adapter_id(client->adapter);
 294                 int i;
 295
 296                 type_name = "adm1022";
 297                 data->has_temp3 = (config >> 7) & 1;    /* config MSB */
 298                 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 299                         if (adm1022_temp3[i] == id &&
 300                             adm1022_temp3[i + 1] == address) {
 301                                 /* enable 2nd remote temp */
 302                                 data->has_temp3 = 1;
 303                                 break;
 304                         }
 305         }
 306
 307         /* Fill in the remaining client fields & put it into the global list */
 308         strlcpy(client->name, type_name, I2C_NAME_SIZE);
 309         mutex_init(&data->update_lock);
 310
 311         /* Tell the I2C layer a new client has arrived */
 312         if ((err = i2c_attach_client(client)))
 313                 goto exit_free;
 314
 315         thmc50_init_client(client);
 316
 317         /* Register sysfs hooks */
 318         if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
 319                 goto exit_detach;
 320
 321         /* Register ADM1022 sysfs hooks */
 322         if (data->type == adm1022)
 323                 if ((err = sysfs_create_group(&client->dev.kobj,
 324                                               &adm1022_group)))
 325                         goto exit_remove_sysfs_thmc50;
 326
 327         /* Register a new directory entry with module sensors */
 328         data->class_dev = hwmon_device_register(&client->dev);
 329         if (IS_ERR(data->class_dev)) {
 330                 err = PTR_ERR(data->class_dev);
 331                 goto exit_remove_sysfs;
 332         }
 333
 334         return 0;
 335
 336 exit_remove_sysfs:
 337         if (data->type == adm1022)
 338                 sysfs_remove_group(&client->dev.kobj, &adm1022_group);
 339 exit_remove_sysfs_thmc50:
 340         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 341 exit_detach:
 342         i2c_detach_client(client);
 343 exit_free:
 344         kfree(data);
 345 exit:
 346         return err;
 347 }
 348
 349 static int thmc50_attach_adapter(struct i2c_adapter *adapter)
 350 {
 351         if (!(adapter->class & I2C_CLASS_HWMON))
 352                 return 0;
 353         return i2c_probe(adapter, &addr_data, thmc50_detect);
 354 }
 355
 356 static int thmc50_detach_client(struct i2c_client *client)
 357 {
 358         struct thmc50_data *data = i2c_get_clientdata(client);
 359         int err;
 360
 361         hwmon_device_unregister(data->class_dev);
 362         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 363         if (data->type == adm1022)
 364                 sysfs_remove_group(&client->dev.kobj, &adm1022_group);
 365
 366         if ((err = i2c_detach_client(client)))
 367                 return err;
 368
 369         kfree(data);
 370
 371         return 0;
 372 }
 373
 374 static void thmc50_init_client(struct i2c_client *client)
 375 {
 376         struct thmc50_data *data = i2c_get_clientdata(client);
 377         int config;
 378
 379         data->analog_out = i2c_smbus_read_byte_data(client,
 380                                                     THMC50_REG_ANALOG_OUT);
 381         /* set up to at least 1 */
 382         if (data->analog_out == 0) {
 383                 data->analog_out = 1;
 384                 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 385                                           data->analog_out);
 386         }
 387         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 388         config |= 0x1;  /* start the chip if it is in standby mode */
 389         if (data->has_temp3)
 390                 config |= 0x80;         /* enable 2nd remote temp */
 391         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 392 }
 393
 394 static struct thmc50_data *thmc50_update_device(struct device *dev)
 395 {
 396         struct i2c_client *client = to_i2c_client(dev);
 397         struct thmc50_data *data = i2c_get_clientdata(client);
 398         int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
 399
 400         mutex_lock(&data->update_lock);
 401
 402         if (time_after(jiffies, data->last_updated + timeout)
 403             || !data->valid) {
 404
 405                 int temps = data->has_temp3 ? 3 : 2;
 406                 int i;
 407                 for (i = 0; i < temps; i++) {
 408                         data->temp_input[i] = i2c_smbus_read_byte_data(client,
 409                                                 THMC50_REG_TEMP[i]);
 410                         data->temp_max[i] = i2c_smbus_read_byte_data(client,
 411                                                 THMC50_REG_TEMP_MAX[i]);
 412                         data->temp_min[i] = i2c_smbus_read_byte_data(client,
 413                                                 THMC50_REG_TEMP_MIN[i]);
 414                 }
 415                 data->analog_out =
 416                     i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
 417                 data->last_updated = jiffies;
 418                 data->valid = 1;
 419         }
 420
 421         mutex_unlock(&data->update_lock);
 422
 423         return data;
 424 }
 425
 426 static int __init sm_thmc50_init(void)
 427 {
 428         return i2c_add_driver(&thmc50_driver);
 429 }
 430
 431 static void __exit sm_thmc50_exit(void)
 432 {
 433         i2c_del_driver(&thmc50_driver);
 434 }
 435
 436 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
 437 MODULE_DESCRIPTION("THMC50 driver");
 438
 439 module_init(sm_thmc50_init);
 440 module_exit(sm_thmc50_exit);