2 # I2C Sensor chip drivers configuration
5 menu "Hardware Monitoring support"
8 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 To find out which specific driver(s) you need, use the
20 sensors-detect script from the lm_sensors package. Read
21 <file:Documentation/hwmon/userspace-tools> for details.
23 This support can also be built as a module. If so, the module
30 config SENSORS_ABITUGURU
32 depends on HWMON && EXPERIMENTAL
34 If you say yes here you get support for the Abit uGuru chips
35 sensor part. The voltage and frequency control parts of the Abit
36 uGuru are not supported. The Abit uGuru chip can be found on Abit
37 uGuru featuring motherboards (most modern Abit motherboards).
39 This driver can also be built as a module. If so, the module
40 will be called abituguru.
42 config SENSORS_ADM1021
43 tristate "Analog Devices ADM1021 and compatibles"
44 depends on HWMON && I2C
46 If you say yes here you get support for Analog Devices ADM1021
47 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
48 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
49 and the XEON processor built-in sensor.
51 This driver can also be built as a module. If so, the module
52 will be called adm1021.
54 config SENSORS_ADM1025
55 tristate "Analog Devices ADM1025 and compatibles"
56 depends on HWMON && I2C && EXPERIMENTAL
59 If you say yes here you get support for Analog Devices ADM1025
60 and Philips NE1619 sensor chips.
62 This driver can also be built as a module. If so, the module
63 will be called adm1025.
65 config SENSORS_ADM1026
66 tristate "Analog Devices ADM1026 and compatibles"
67 depends on HWMON && I2C && EXPERIMENTAL
70 If you say yes here you get support for Analog Devices ADM1026
73 This driver can also be built as a module. If so, the module
74 will be called adm1026.
76 config SENSORS_ADM1031
77 tristate "Analog Devices ADM1031 and compatibles"
78 depends on HWMON && I2C && EXPERIMENTAL
80 If you say yes here you get support for Analog Devices ADM1031
81 and ADM1030 sensor chips.
83 This driver can also be built as a module. If so, the module
84 will be called adm1031.
86 config SENSORS_ADM9240
87 tristate "Analog Devices ADM9240 and compatibles"
88 depends on HWMON && I2C && EXPERIMENTAL
91 If you say yes here you get support for Analog Devices ADM9240,
92 Dallas DS1780, National Semiconductor LM81 sensor chips.
94 This driver can also be built as a module. If so, the module
95 will be called adm9240.
98 tristate "Asus ASB100 Bach"
99 depends on HWMON && I2C && EXPERIMENTAL
102 If you say yes here you get support for the ASB100 Bach sensor
103 chip found on some Asus mainboards.
105 This driver can also be built as a module. If so, the module
106 will be called asb100.
109 tristate "Attansic ATXP1 VID controller"
110 depends on HWMON && I2C && EXPERIMENTAL
113 If you say yes here you get support for the Attansic ATXP1 VID
116 If your board have such a chip, you are able to control your CPU
117 core and other voltages.
119 This driver can also be built as a module. If so, the module
120 will be called atxp1.
122 config SENSORS_DS1621
123 tristate "Dallas Semiconductor DS1621 and DS1625"
124 depends on HWMON && I2C && EXPERIMENTAL
126 If you say yes here you get support for Dallas Semiconductor
127 DS1621 and DS1625 sensor chips.
129 This driver can also be built as a module. If so, the module
130 will be called ds1621.
132 config SENSORS_F71805F
133 tristate "Fintek F71805F/FG"
134 depends on HWMON && EXPERIMENTAL
136 If you say yes here you get support for hardware monitoring
137 features of the Fintek F71805F/FG chips.
139 This driver can also be built as a module. If so, the module
140 will be called f71805f.
142 config SENSORS_FSCHER
143 tristate "FSC Hermes"
144 depends on HWMON && I2C && EXPERIMENTAL
146 If you say yes here you get support for Fujitsu Siemens
147 Computers Hermes sensor chips.
149 This driver can also be built as a module. If so, the module
150 will be called fscher.
152 config SENSORS_FSCPOS
153 tristate "FSC Poseidon"
154 depends on HWMON && I2C && EXPERIMENTAL
156 If you say yes here you get support for Fujitsu Siemens
157 Computers Poseidon sensor chips.
159 This driver can also be built as a module. If so, the module
160 will be called fscpos.
162 config SENSORS_GL518SM
163 tristate "Genesys Logic GL518SM"
164 depends on HWMON && I2C
166 If you say yes here you get support for Genesys Logic GL518SM
169 This driver can also be built as a module. If so, the module
170 will be called gl518sm.
172 config SENSORS_GL520SM
173 tristate "Genesys Logic GL520SM"
174 depends on HWMON && I2C && EXPERIMENTAL
177 If you say yes here you get support for Genesys Logic GL520SM
180 This driver can also be built as a module. If so, the module
181 will be called gl520sm.
184 tristate "ITE IT87xx and compatibles"
185 depends on HWMON && I2C
189 If you say yes here you get support for ITE IT87xx sensor chips
192 This driver can also be built as a module. If so, the module
196 tristate "National Semiconductor LM63"
197 depends on HWMON && I2C && EXPERIMENTAL
199 If you say yes here you get support for the National Semiconductor
200 LM63 remote diode digital temperature sensor with integrated fan
201 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
202 motherboard, among others.
204 This driver can also be built as a module. If so, the module
208 tristate "National Semiconductor LM75 and compatibles"
209 depends on HWMON && I2C
211 If you say yes here you get support for National Semiconductor LM75
212 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
213 9-bit precision mode), and TelCom (now Microchip) TCN75.
215 The DS75 and DS1775 in 10- to 12-bit precision modes will require
216 a force module parameter. The driver will not handle the extra
219 This driver can also be built as a module. If so, the module
223 tristate "National Semiconductor LM77"
224 depends on HWMON && I2C && EXPERIMENTAL
226 If you say yes here you get support for National Semiconductor LM77
229 This driver can also be built as a module. If so, the module
233 tristate "National Semiconductor LM78 and compatibles"
234 depends on HWMON && I2C && EXPERIMENTAL
238 If you say yes here you get support for National Semiconductor LM78,
241 This driver can also be built as a module. If so, the module
245 tristate "National Semiconductor LM80"
246 depends on HWMON && I2C && EXPERIMENTAL
248 If you say yes here you get support for National Semiconductor
251 This driver can also be built as a module. If so, the module
255 tristate "National Semiconductor LM83 and compatibles"
256 depends on HWMON && I2C
258 If you say yes here you get support for National Semiconductor
259 LM82 and LM83 sensor chips.
261 This driver can also be built as a module. If so, the module
265 tristate "National Semiconductor LM85 and compatibles"
266 depends on HWMON && I2C && EXPERIMENTAL
269 If you say yes here you get support for National Semiconductor LM85
270 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
272 This driver can also be built as a module. If so, the module
276 tristate "National Semiconductor LM87"
277 depends on HWMON && I2C && EXPERIMENTAL
280 If you say yes here you get support for National Semiconductor LM87
283 This driver can also be built as a module. If so, the module
287 tristate "National Semiconductor LM90 and compatibles"
288 depends on HWMON && I2C
290 If you say yes here you get support for National Semiconductor LM90,
291 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
292 MAX6658 sensor chips.
294 The Analog Devices ADT7461 sensor chip is also supported, but only
295 if found in ADM1032 compatibility mode.
297 This driver can also be built as a module. If so, the module
301 tristate "National Semiconductor LM92 and compatibles"
302 depends on HWMON && I2C && EXPERIMENTAL
304 If you say yes here you get support for National Semiconductor LM92
305 and Maxim MAX6635 sensor chips.
307 This driver can also be built as a module. If so, the module
310 config SENSORS_MAX1619
311 tristate "Maxim MAX1619 sensor chip"
312 depends on HWMON && I2C && EXPERIMENTAL
314 If you say yes here you get support for MAX1619 sensor chip.
316 This driver can also be built as a module. If so, the module
317 will be called max1619.
319 config SENSORS_PC87360
320 tristate "National Semiconductor PC87360 family"
321 depends on HWMON && I2C && EXPERIMENTAL
325 If you say yes here you get access to the hardware monitoring
326 functions of the National Semiconductor PC8736x Super-I/O chips.
327 The PC87360, PC87363 and PC87364 only have fan monitoring and
328 control. The PC87365 and PC87366 additionally have voltage and
329 temperature monitoring.
331 This driver can also be built as a module. If so, the module
332 will be called pc87360.
334 config SENSORS_SIS5595
335 tristate "Silicon Integrated Systems Corp. SiS5595"
336 depends on HWMON && I2C && PCI && EXPERIMENTAL
339 If you say yes here you get support for the integrated sensors in
340 SiS5595 South Bridges.
342 This driver can also be built as a module. If so, the module
343 will be called sis5595.
345 config SENSORS_SMSC47M1
346 tristate "SMSC LPC47M10x and compatibles"
347 depends on HWMON && I2C && EXPERIMENTAL
350 If you say yes here you get support for the integrated fan
351 monitoring and control capabilities of the SMSC LPC47B27x,
352 LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
355 The temperature and voltage sensor features of the LPC47M192
356 and LPC47M997 are supported by another driver, select also
357 "SMSC LPC47M192 and compatibles" below for those.
359 This driver can also be built as a module. If so, the module
360 will be called smsc47m1.
362 config SENSORS_SMSC47M192
363 tristate "SMSC LPC47M192 and compatibles"
364 depends on HWMON && I2C && EXPERIMENTAL
367 If you say yes here you get support for the temperature and
368 voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
370 The fan monitoring and control capabilities of these chips
371 are supported by another driver, select
372 "SMSC LPC47M10x and compatibles" above. You need both drivers
373 if you want fan control and voltage/temperature sensor support.
375 This driver can also be built as a module. If so, the module
376 will be called smsc47m192.
378 config SENSORS_SMSC47B397
379 tristate "SMSC LPC47B397-NC"
380 depends on HWMON && I2C && EXPERIMENTAL
383 If you say yes here you get support for the SMSC LPC47B397-NC
386 This driver can also be built as a module. If so, the module
387 will be called smsc47b397.
389 config SENSORS_VIA686A
391 depends on HWMON && I2C && PCI
394 If you say yes here you get support for the integrated sensors in
395 Via 686A/B South Bridges.
397 This driver can also be built as a module. If so, the module
398 will be called via686a.
400 config SENSORS_VT8231
402 depends on HWMON && I2C && PCI && EXPERIMENTAL
406 If you say yes here then you get support for the integrated sensors
407 in the VIA VT8231 device.
409 This driver can also be built as a module. If so, the module
410 will be called vt8231.
412 config SENSORS_W83781D
413 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
414 depends on HWMON && I2C
418 If you say yes here you get support for the Winbond W8378x series
419 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
420 and the similar Asus AS99127F.
422 This driver can also be built as a module. If so, the module
423 will be called w83781d.
425 config SENSORS_W83791D
426 tristate "Winbond W83791D"
427 depends on HWMON && I2C && EXPERIMENTAL
430 If you say yes here you get support for the Winbond W83791D chip.
432 This driver can also be built as a module. If so, the module
433 will be called w83791d.
435 config SENSORS_W83792D
436 tristate "Winbond W83792D"
437 depends on HWMON && I2C && EXPERIMENTAL
439 If you say yes here you get support for the Winbond W83792D chip.
441 This driver can also be built as a module. If so, the module
442 will be called w83792d.
444 config SENSORS_W83L785TS
445 tristate "Winbond W83L785TS-S"
446 depends on HWMON && I2C && EXPERIMENTAL
448 If you say yes here you get support for the Winbond W83L785TS-S
449 sensor chip, which is used on the Asus A7N8X, among other
452 This driver can also be built as a module. If so, the module
453 will be called w83l785ts.
455 config SENSORS_W83627HF
456 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
457 depends on HWMON && I2C
461 If you say yes here you get support for the Winbond W836X7 series
462 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
465 This driver can also be built as a module. If so, the module
466 will be called w83627hf.
468 config SENSORS_W83627EHF
469 tristate "Winbond W83627EHF"
470 depends on HWMON && I2C && EXPERIMENTAL
473 If you say yes here you get preliminary support for the hardware
474 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
475 Only fan and temperature inputs are supported at the moment, while
476 the chip does much more than that.
478 This driver also supports the W83627EHG, which is the lead-free
479 version of the W83627EHF.
481 This driver can also be built as a module. If so, the module
482 will be called w83627ehf.
485 tristate "IBM Hard Drive Active Protection System (hdaps)"
486 depends on HWMON && INPUT && X86
489 This driver provides support for the IBM Hard Drive Active Protection
490 System (hdaps), which provides an accelerometer and other misc. data.
491 ThinkPads starting with the R50, T41, and X40 are supported. The
492 accelerometer data is readable via sysfs.
494 This driver also provides an absolute input class device, allowing
495 the laptop to act as a pinball machine-esque joystick.
497 Say Y here if you have an applicable laptop and want to experience
498 the awesome power of hdaps.
500 config HWMON_DEBUG_CHIP
501 bool "Hardware Monitoring Chip debugging messages"
505 Say Y here if you want the I2C chip drivers to produce a bunch of
506 debug messages to the system log. Select this if you are having
507 a problem with I2C support and want to see more of what is going