4 * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <minyard@mvista.com>
11 * Copyright 2002 MontaVista Software Inc.
12 * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
25 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
26 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
27 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
28 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
29 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
37 * This file holds the "policy" for the interface to the SMI state
38 * machine. It does the configuration, handles timers and interrupts,
39 * and drives the real SMI state machine.
42 #include <linux/module.h>
43 #include <linux/moduleparam.h>
44 #include <asm/system.h>
45 #include <linux/sched.h>
46 #include <linux/timer.h>
47 #include <linux/errno.h>
48 #include <linux/spinlock.h>
49 #include <linux/slab.h>
50 #include <linux/delay.h>
51 #include <linux/list.h>
52 #include <linux/pci.h>
53 #include <linux/ioport.h>
54 #include <linux/notifier.h>
55 #include <linux/mutex.h>
56 #include <linux/kthread.h>
58 #include <linux/interrupt.h>
59 #include <linux/rcupdate.h>
60 #include <linux/ipmi_smi.h>
62 #include "ipmi_si_sm.h"
63 #include <linux/init.h>
64 #include <linux/dmi.h>
65 #include <linux/string.h>
66 #include <linux/ctype.h>
69 #include <asm/of_device.h>
70 #include <asm/of_platform.h>
73 #define PFX "ipmi_si: "
75 /* Measure times between events in the driver. */
78 /* Call every 10 ms. */
79 #define SI_TIMEOUT_TIME_USEC 10000
80 #define SI_USEC_PER_JIFFY (1000000/HZ)
81 #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
82 #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
85 /* Bit for BMC global enables. */
86 #define IPMI_BMC_RCV_MSG_INTR 0x01
87 #define IPMI_BMC_EVT_MSG_INTR 0x02
88 #define IPMI_BMC_EVT_MSG_BUFF 0x04
89 #define IPMI_BMC_SYS_LOG 0x08
96 SI_CLEARING_FLAGS_THEN_SET_IRQ,
98 SI_ENABLE_INTERRUPTS1,
99 SI_ENABLE_INTERRUPTS2,
100 SI_DISABLE_INTERRUPTS1,
101 SI_DISABLE_INTERRUPTS2
102 /* FIXME - add watchdog stuff. */
105 /* Some BT-specific defines we need here. */
106 #define IPMI_BT_INTMASK_REG 2
107 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2
108 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1
111 SI_KCS, SI_SMIC, SI_BT
113 static char *si_to_str[] = { "kcs", "smic", "bt" };
115 #define DEVICE_NAME "ipmi_si"
117 static struct device_driver ipmi_driver =
120 .bus = &platform_bus_type
127 struct si_sm_data *si_sm;
128 struct si_sm_handlers *handlers;
129 enum si_type si_type;
132 struct list_head xmit_msgs;
133 struct list_head hp_xmit_msgs;
134 struct ipmi_smi_msg *curr_msg;
135 enum si_intf_state si_state;
137 /* Used to handle the various types of I/O that can occur with
140 int (*io_setup)(struct smi_info *info);
141 void (*io_cleanup)(struct smi_info *info);
142 int (*irq_setup)(struct smi_info *info);
143 void (*irq_cleanup)(struct smi_info *info);
144 unsigned int io_size;
145 char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
146 void (*addr_source_cleanup)(struct smi_info *info);
147 void *addr_source_data;
149 /* Per-OEM handler, called from handle_flags().
150 Returns 1 when handle_flags() needs to be re-run
151 or 0 indicating it set si_state itself.
153 int (*oem_data_avail_handler)(struct smi_info *smi_info);
155 /* Flags from the last GET_MSG_FLAGS command, used when an ATTN
156 is set to hold the flags until we are done handling everything
158 #define RECEIVE_MSG_AVAIL 0x01
159 #define EVENT_MSG_BUFFER_FULL 0x02
160 #define WDT_PRE_TIMEOUT_INT 0x08
161 #define OEM0_DATA_AVAIL 0x20
162 #define OEM1_DATA_AVAIL 0x40
163 #define OEM2_DATA_AVAIL 0x80
164 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
167 unsigned char msg_flags;
169 /* If set to true, this will request events the next time the
170 state machine is idle. */
173 /* If true, run the state machine to completion on every send
174 call. Generally used after a panic to make sure stuff goes
176 int run_to_completion;
178 /* The I/O port of an SI interface. */
181 /* The space between start addresses of the two ports. For
182 instance, if the first port is 0xca2 and the spacing is 4, then
183 the second port is 0xca6. */
184 unsigned int spacing;
186 /* zero if no irq; */
189 /* The timer for this si. */
190 struct timer_list si_timer;
192 /* The time (in jiffies) the last timeout occurred at. */
193 unsigned long last_timeout_jiffies;
195 /* Used to gracefully stop the timer without race conditions. */
196 atomic_t stop_operation;
198 /* The driver will disable interrupts when it gets into a
199 situation where it cannot handle messages due to lack of
200 memory. Once that situation clears up, it will re-enable
202 int interrupt_disabled;
204 /* From the get device id response... */
205 struct ipmi_device_id device_id;
207 /* Driver model stuff. */
209 struct platform_device *pdev;
211 /* True if we allocated the device, false if it came from
212 * someplace else (like PCI). */
215 /* Slave address, could be reported from DMI. */
216 unsigned char slave_addr;
218 /* Counters and things for the proc filesystem. */
219 spinlock_t count_lock;
220 unsigned long short_timeouts;
221 unsigned long long_timeouts;
222 unsigned long timeout_restarts;
224 unsigned long interrupts;
225 unsigned long attentions;
226 unsigned long flag_fetches;
227 unsigned long hosed_count;
228 unsigned long complete_transactions;
229 unsigned long events;
230 unsigned long watchdog_pretimeouts;
231 unsigned long incoming_messages;
233 struct task_struct *thread;
235 struct list_head link;
238 #define SI_MAX_PARMS 4
240 static int force_kipmid[SI_MAX_PARMS];
241 static int num_force_kipmid;
243 static int unload_when_empty = 1;
245 static int try_smi_init(struct smi_info *smi);
246 static void cleanup_one_si(struct smi_info *to_clean);
248 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
249 static int register_xaction_notifier(struct notifier_block * nb)
251 return atomic_notifier_chain_register(&xaction_notifier_list, nb);
254 static void deliver_recv_msg(struct smi_info *smi_info,
255 struct ipmi_smi_msg *msg)
257 /* Deliver the message to the upper layer with the lock
259 spin_unlock(&(smi_info->si_lock));
260 ipmi_smi_msg_received(smi_info->intf, msg);
261 spin_lock(&(smi_info->si_lock));
264 static void return_hosed_msg(struct smi_info *smi_info, int cCode)
266 struct ipmi_smi_msg *msg = smi_info->curr_msg;
268 if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
269 cCode = IPMI_ERR_UNSPECIFIED;
270 /* else use it as is */
272 /* Make it a reponse */
273 msg->rsp[0] = msg->data[0] | 4;
274 msg->rsp[1] = msg->data[1];
278 smi_info->curr_msg = NULL;
279 deliver_recv_msg(smi_info, msg);
282 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
285 struct list_head *entry = NULL;
290 /* No need to save flags, we aleady have interrupts off and we
291 already hold the SMI lock. */
292 spin_lock(&(smi_info->msg_lock));
294 /* Pick the high priority queue first. */
295 if (!list_empty(&(smi_info->hp_xmit_msgs))) {
296 entry = smi_info->hp_xmit_msgs.next;
297 } else if (!list_empty(&(smi_info->xmit_msgs))) {
298 entry = smi_info->xmit_msgs.next;
302 smi_info->curr_msg = NULL;
308 smi_info->curr_msg = list_entry(entry,
313 printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
315 err = atomic_notifier_call_chain(&xaction_notifier_list,
317 if (err & NOTIFY_STOP_MASK) {
318 rv = SI_SM_CALL_WITHOUT_DELAY;
321 err = smi_info->handlers->start_transaction(
323 smi_info->curr_msg->data,
324 smi_info->curr_msg->data_size);
326 return_hosed_msg(smi_info, err);
329 rv = SI_SM_CALL_WITHOUT_DELAY;
332 spin_unlock(&(smi_info->msg_lock));
337 static void start_enable_irq(struct smi_info *smi_info)
339 unsigned char msg[2];
341 /* If we are enabling interrupts, we have to tell the
343 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
344 msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
346 smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
347 smi_info->si_state = SI_ENABLE_INTERRUPTS1;
350 static void start_disable_irq(struct smi_info *smi_info)
352 unsigned char msg[2];
354 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
355 msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
357 smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
358 smi_info->si_state = SI_DISABLE_INTERRUPTS1;
361 static void start_clear_flags(struct smi_info *smi_info)
363 unsigned char msg[3];
365 /* Make sure the watchdog pre-timeout flag is not set at startup. */
366 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
367 msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
368 msg[2] = WDT_PRE_TIMEOUT_INT;
370 smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
371 smi_info->si_state = SI_CLEARING_FLAGS;
374 /* When we have a situtaion where we run out of memory and cannot
375 allocate messages, we just leave them in the BMC and run the system
376 polled until we can allocate some memory. Once we have some
377 memory, we will re-enable the interrupt. */
378 static inline void disable_si_irq(struct smi_info *smi_info)
380 if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
381 start_disable_irq(smi_info);
382 smi_info->interrupt_disabled = 1;
386 static inline void enable_si_irq(struct smi_info *smi_info)
388 if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
389 start_enable_irq(smi_info);
390 smi_info->interrupt_disabled = 0;
394 static void handle_flags(struct smi_info *smi_info)
397 if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
398 /* Watchdog pre-timeout */
399 spin_lock(&smi_info->count_lock);
400 smi_info->watchdog_pretimeouts++;
401 spin_unlock(&smi_info->count_lock);
403 start_clear_flags(smi_info);
404 smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
405 spin_unlock(&(smi_info->si_lock));
406 ipmi_smi_watchdog_pretimeout(smi_info->intf);
407 spin_lock(&(smi_info->si_lock));
408 } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
409 /* Messages available. */
410 smi_info->curr_msg = ipmi_alloc_smi_msg();
411 if (!smi_info->curr_msg) {
412 disable_si_irq(smi_info);
413 smi_info->si_state = SI_NORMAL;
416 enable_si_irq(smi_info);
418 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
419 smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
420 smi_info->curr_msg->data_size = 2;
422 smi_info->handlers->start_transaction(
424 smi_info->curr_msg->data,
425 smi_info->curr_msg->data_size);
426 smi_info->si_state = SI_GETTING_MESSAGES;
427 } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
428 /* Events available. */
429 smi_info->curr_msg = ipmi_alloc_smi_msg();
430 if (!smi_info->curr_msg) {
431 disable_si_irq(smi_info);
432 smi_info->si_state = SI_NORMAL;
435 enable_si_irq(smi_info);
437 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
438 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
439 smi_info->curr_msg->data_size = 2;
441 smi_info->handlers->start_transaction(
443 smi_info->curr_msg->data,
444 smi_info->curr_msg->data_size);
445 smi_info->si_state = SI_GETTING_EVENTS;
446 } else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
447 smi_info->oem_data_avail_handler) {
448 if (smi_info->oem_data_avail_handler(smi_info))
451 smi_info->si_state = SI_NORMAL;
455 static void handle_transaction_done(struct smi_info *smi_info)
457 struct ipmi_smi_msg *msg;
462 printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
464 switch (smi_info->si_state) {
466 if (!smi_info->curr_msg)
469 smi_info->curr_msg->rsp_size
470 = smi_info->handlers->get_result(
472 smi_info->curr_msg->rsp,
473 IPMI_MAX_MSG_LENGTH);
475 /* Do this here becase deliver_recv_msg() releases the
476 lock, and a new message can be put in during the
477 time the lock is released. */
478 msg = smi_info->curr_msg;
479 smi_info->curr_msg = NULL;
480 deliver_recv_msg(smi_info, msg);
483 case SI_GETTING_FLAGS:
485 unsigned char msg[4];
488 /* We got the flags from the SMI, now handle them. */
489 len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
491 /* Error fetching flags, just give up for
493 smi_info->si_state = SI_NORMAL;
494 } else if (len < 4) {
495 /* Hmm, no flags. That's technically illegal, but
496 don't use uninitialized data. */
497 smi_info->si_state = SI_NORMAL;
499 smi_info->msg_flags = msg[3];
500 handle_flags(smi_info);
505 case SI_CLEARING_FLAGS:
506 case SI_CLEARING_FLAGS_THEN_SET_IRQ:
508 unsigned char msg[3];
510 /* We cleared the flags. */
511 smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
513 /* Error clearing flags */
515 "ipmi_si: Error clearing flags: %2.2x\n",
518 if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
519 start_enable_irq(smi_info);
521 smi_info->si_state = SI_NORMAL;
525 case SI_GETTING_EVENTS:
527 smi_info->curr_msg->rsp_size
528 = smi_info->handlers->get_result(
530 smi_info->curr_msg->rsp,
531 IPMI_MAX_MSG_LENGTH);
533 /* Do this here becase deliver_recv_msg() releases the
534 lock, and a new message can be put in during the
535 time the lock is released. */
536 msg = smi_info->curr_msg;
537 smi_info->curr_msg = NULL;
538 if (msg->rsp[2] != 0) {
539 /* Error getting event, probably done. */
542 /* Take off the event flag. */
543 smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
544 handle_flags(smi_info);
546 spin_lock(&smi_info->count_lock);
548 spin_unlock(&smi_info->count_lock);
550 /* Do this before we deliver the message
551 because delivering the message releases the
552 lock and something else can mess with the
554 handle_flags(smi_info);
556 deliver_recv_msg(smi_info, msg);
561 case SI_GETTING_MESSAGES:
563 smi_info->curr_msg->rsp_size
564 = smi_info->handlers->get_result(
566 smi_info->curr_msg->rsp,
567 IPMI_MAX_MSG_LENGTH);
569 /* Do this here becase deliver_recv_msg() releases the
570 lock, and a new message can be put in during the
571 time the lock is released. */
572 msg = smi_info->curr_msg;
573 smi_info->curr_msg = NULL;
574 if (msg->rsp[2] != 0) {
575 /* Error getting event, probably done. */
578 /* Take off the msg flag. */
579 smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
580 handle_flags(smi_info);
582 spin_lock(&smi_info->count_lock);
583 smi_info->incoming_messages++;
584 spin_unlock(&smi_info->count_lock);
586 /* Do this before we deliver the message
587 because delivering the message releases the
588 lock and something else can mess with the
590 handle_flags(smi_info);
592 deliver_recv_msg(smi_info, msg);
597 case SI_ENABLE_INTERRUPTS1:
599 unsigned char msg[4];
601 /* We got the flags from the SMI, now handle them. */
602 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
605 "ipmi_si: Could not enable interrupts"
606 ", failed get, using polled mode.\n");
607 smi_info->si_state = SI_NORMAL;
609 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
610 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
612 IPMI_BMC_RCV_MSG_INTR |
613 IPMI_BMC_EVT_MSG_INTR);
614 smi_info->handlers->start_transaction(
615 smi_info->si_sm, msg, 3);
616 smi_info->si_state = SI_ENABLE_INTERRUPTS2;
621 case SI_ENABLE_INTERRUPTS2:
623 unsigned char msg[4];
625 /* We got the flags from the SMI, now handle them. */
626 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
629 "ipmi_si: Could not enable interrupts"
630 ", failed set, using polled mode.\n");
632 smi_info->si_state = SI_NORMAL;
636 case SI_DISABLE_INTERRUPTS1:
638 unsigned char msg[4];
640 /* We got the flags from the SMI, now handle them. */
641 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
644 "ipmi_si: Could not disable interrupts"
646 smi_info->si_state = SI_NORMAL;
648 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
649 msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
651 ~(IPMI_BMC_RCV_MSG_INTR |
652 IPMI_BMC_EVT_MSG_INTR));
653 smi_info->handlers->start_transaction(
654 smi_info->si_sm, msg, 3);
655 smi_info->si_state = SI_DISABLE_INTERRUPTS2;
660 case SI_DISABLE_INTERRUPTS2:
662 unsigned char msg[4];
664 /* We got the flags from the SMI, now handle them. */
665 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
668 "ipmi_si: Could not disable interrupts"
671 smi_info->si_state = SI_NORMAL;
677 /* Called on timeouts and events. Timeouts should pass the elapsed
678 time, interrupts should pass in zero. Must be called with
679 si_lock held and interrupts disabled. */
680 static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
683 enum si_sm_result si_sm_result;
686 /* There used to be a loop here that waited a little while
687 (around 25us) before giving up. That turned out to be
688 pointless, the minimum delays I was seeing were in the 300us
689 range, which is far too long to wait in an interrupt. So
690 we just run until the state machine tells us something
691 happened or it needs a delay. */
692 si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
694 while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
696 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
699 if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
701 spin_lock(&smi_info->count_lock);
702 smi_info->complete_transactions++;
703 spin_unlock(&smi_info->count_lock);
705 handle_transaction_done(smi_info);
706 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
708 else if (si_sm_result == SI_SM_HOSED)
710 spin_lock(&smi_info->count_lock);
711 smi_info->hosed_count++;
712 spin_unlock(&smi_info->count_lock);
714 /* Do the before return_hosed_msg, because that
715 releases the lock. */
716 smi_info->si_state = SI_NORMAL;
717 if (smi_info->curr_msg != NULL) {
718 /* If we were handling a user message, format
719 a response to send to the upper layer to
720 tell it about the error. */
721 return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
723 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
727 * We prefer handling attn over new messages. But don't do
728 * this if there is not yet an upper layer to handle anything.
730 if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN)
732 unsigned char msg[2];
734 spin_lock(&smi_info->count_lock);
735 smi_info->attentions++;
736 spin_unlock(&smi_info->count_lock);
738 /* Got a attn, send down a get message flags to see
739 what's causing it. It would be better to handle
740 this in the upper layer, but due to the way
741 interrupts work with the SMI, that's not really
743 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
744 msg[1] = IPMI_GET_MSG_FLAGS_CMD;
746 smi_info->handlers->start_transaction(
747 smi_info->si_sm, msg, 2);
748 smi_info->si_state = SI_GETTING_FLAGS;
752 /* If we are currently idle, try to start the next message. */
753 if (si_sm_result == SI_SM_IDLE) {
754 spin_lock(&smi_info->count_lock);
756 spin_unlock(&smi_info->count_lock);
758 si_sm_result = start_next_msg(smi_info);
759 if (si_sm_result != SI_SM_IDLE)
763 if ((si_sm_result == SI_SM_IDLE)
764 && (atomic_read(&smi_info->req_events)))
766 /* We are idle and the upper layer requested that I fetch
768 atomic_set(&smi_info->req_events, 0);
770 smi_info->curr_msg = ipmi_alloc_smi_msg();
771 if (!smi_info->curr_msg)
774 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
775 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
776 smi_info->curr_msg->data_size = 2;
778 smi_info->handlers->start_transaction(
780 smi_info->curr_msg->data,
781 smi_info->curr_msg->data_size);
782 smi_info->si_state = SI_GETTING_EVENTS;
789 static void sender(void *send_info,
790 struct ipmi_smi_msg *msg,
793 struct smi_info *smi_info = send_info;
794 enum si_sm_result result;
800 if (atomic_read(&smi_info->stop_operation)) {
801 msg->rsp[0] = msg->data[0] | 4;
802 msg->rsp[1] = msg->data[1];
803 msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
805 deliver_recv_msg(smi_info, msg);
809 spin_lock_irqsave(&(smi_info->msg_lock), flags);
812 printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
815 if (smi_info->run_to_completion) {
816 /* If we are running to completion, then throw it in
817 the list and run transactions until everything is
818 clear. Priority doesn't matter here. */
819 list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
821 /* We have to release the msg lock and claim the smi
822 lock in this case, because of race conditions. */
823 spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
825 spin_lock_irqsave(&(smi_info->si_lock), flags);
826 result = smi_event_handler(smi_info, 0);
827 while (result != SI_SM_IDLE) {
828 udelay(SI_SHORT_TIMEOUT_USEC);
829 result = smi_event_handler(smi_info,
830 SI_SHORT_TIMEOUT_USEC);
832 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
836 list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
838 list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
841 spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
843 spin_lock_irqsave(&(smi_info->si_lock), flags);
844 if ((smi_info->si_state == SI_NORMAL)
845 && (smi_info->curr_msg == NULL))
847 start_next_msg(smi_info);
849 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
852 static void set_run_to_completion(void *send_info, int i_run_to_completion)
854 struct smi_info *smi_info = send_info;
855 enum si_sm_result result;
858 spin_lock_irqsave(&(smi_info->si_lock), flags);
860 smi_info->run_to_completion = i_run_to_completion;
861 if (i_run_to_completion) {
862 result = smi_event_handler(smi_info, 0);
863 while (result != SI_SM_IDLE) {
864 udelay(SI_SHORT_TIMEOUT_USEC);
865 result = smi_event_handler(smi_info,
866 SI_SHORT_TIMEOUT_USEC);
870 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
873 static int ipmi_thread(void *data)
875 struct smi_info *smi_info = data;
877 enum si_sm_result smi_result;
879 set_user_nice(current, 19);
880 while (!kthread_should_stop()) {
881 spin_lock_irqsave(&(smi_info->si_lock), flags);
882 smi_result = smi_event_handler(smi_info, 0);
883 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
884 if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
887 else if (smi_result == SI_SM_CALL_WITH_DELAY)
890 schedule_timeout_interruptible(1);
896 static void poll(void *send_info)
898 struct smi_info *smi_info = send_info;
902 * Make sure there is some delay in the poll loop so we can
903 * drive time forward and timeout things.
906 spin_lock_irqsave(&smi_info->si_lock, flags);
907 smi_event_handler(smi_info, 10);
908 spin_unlock_irqrestore(&smi_info->si_lock, flags);
911 static void request_events(void *send_info)
913 struct smi_info *smi_info = send_info;
915 if (atomic_read(&smi_info->stop_operation))
918 atomic_set(&smi_info->req_events, 1);
921 static int initialized;
923 static void smi_timeout(unsigned long data)
925 struct smi_info *smi_info = (struct smi_info *) data;
926 enum si_sm_result smi_result;
928 unsigned long jiffies_now;
934 spin_lock_irqsave(&(smi_info->si_lock), flags);
937 printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
939 jiffies_now = jiffies;
940 time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
941 * SI_USEC_PER_JIFFY);
942 smi_result = smi_event_handler(smi_info, time_diff);
944 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
946 smi_info->last_timeout_jiffies = jiffies_now;
948 if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
949 /* Running with interrupts, only do long timeouts. */
950 smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
951 spin_lock_irqsave(&smi_info->count_lock, flags);
952 smi_info->long_timeouts++;
953 spin_unlock_irqrestore(&smi_info->count_lock, flags);
957 /* If the state machine asks for a short delay, then shorten
958 the timer timeout. */
959 if (smi_result == SI_SM_CALL_WITH_DELAY) {
960 spin_lock_irqsave(&smi_info->count_lock, flags);
961 smi_info->short_timeouts++;
962 spin_unlock_irqrestore(&smi_info->count_lock, flags);
963 smi_info->si_timer.expires = jiffies + 1;
965 spin_lock_irqsave(&smi_info->count_lock, flags);
966 smi_info->long_timeouts++;
967 spin_unlock_irqrestore(&smi_info->count_lock, flags);
968 smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
972 add_timer(&(smi_info->si_timer));
975 static irqreturn_t si_irq_handler(int irq, void *data)
977 struct smi_info *smi_info = data;
983 spin_lock_irqsave(&(smi_info->si_lock), flags);
985 spin_lock(&smi_info->count_lock);
986 smi_info->interrupts++;
987 spin_unlock(&smi_info->count_lock);
991 printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
993 smi_event_handler(smi_info, 0);
994 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
998 static irqreturn_t si_bt_irq_handler(int irq, void *data)
1000 struct smi_info *smi_info = data;
1001 /* We need to clear the IRQ flag for the BT interface. */
1002 smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
1003 IPMI_BT_INTMASK_CLEAR_IRQ_BIT
1004 | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1005 return si_irq_handler(irq, data);
1008 static int smi_start_processing(void *send_info,
1011 struct smi_info *new_smi = send_info;
1014 new_smi->intf = intf;
1016 /* Try to claim any interrupts. */
1017 if (new_smi->irq_setup)
1018 new_smi->irq_setup(new_smi);
1020 /* Set up the timer that drives the interface. */
1021 setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
1022 new_smi->last_timeout_jiffies = jiffies;
1023 mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
1026 * Check if the user forcefully enabled the daemon.
1028 if (new_smi->intf_num < num_force_kipmid)
1029 enable = force_kipmid[new_smi->intf_num];
1031 * The BT interface is efficient enough to not need a thread,
1032 * and there is no need for a thread if we have interrupts.
1034 else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
1038 new_smi->thread = kthread_run(ipmi_thread, new_smi,
1039 "kipmi%d", new_smi->intf_num);
1040 if (IS_ERR(new_smi->thread)) {
1041 printk(KERN_NOTICE "ipmi_si_intf: Could not start"
1042 " kernel thread due to error %ld, only using"
1043 " timers to drive the interface\n",
1044 PTR_ERR(new_smi->thread));
1045 new_smi->thread = NULL;
1052 static void set_maintenance_mode(void *send_info, int enable)
1054 struct smi_info *smi_info = send_info;
1057 atomic_set(&smi_info->req_events, 0);
1060 static struct ipmi_smi_handlers handlers =
1062 .owner = THIS_MODULE,
1063 .start_processing = smi_start_processing,
1065 .request_events = request_events,
1066 .set_maintenance_mode = set_maintenance_mode,
1067 .set_run_to_completion = set_run_to_completion,
1071 /* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
1072 a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
1074 static LIST_HEAD(smi_infos);
1075 static DEFINE_MUTEX(smi_infos_lock);
1076 static int smi_num; /* Used to sequence the SMIs */
1078 #define DEFAULT_REGSPACING 1
1079 #define DEFAULT_REGSIZE 1
1081 static int si_trydefaults = 1;
1082 static char *si_type[SI_MAX_PARMS];
1083 #define MAX_SI_TYPE_STR 30
1084 static char si_type_str[MAX_SI_TYPE_STR];
1085 static unsigned long addrs[SI_MAX_PARMS];
1086 static unsigned int num_addrs;
1087 static unsigned int ports[SI_MAX_PARMS];
1088 static unsigned int num_ports;
1089 static int irqs[SI_MAX_PARMS];
1090 static unsigned int num_irqs;
1091 static int regspacings[SI_MAX_PARMS];
1092 static unsigned int num_regspacings;
1093 static int regsizes[SI_MAX_PARMS];
1094 static unsigned int num_regsizes;
1095 static int regshifts[SI_MAX_PARMS];
1096 static unsigned int num_regshifts;
1097 static int slave_addrs[SI_MAX_PARMS];
1098 static unsigned int num_slave_addrs;
1100 #define IPMI_IO_ADDR_SPACE 0
1101 #define IPMI_MEM_ADDR_SPACE 1
1102 static char *addr_space_to_str[] = { "i/o", "mem" };
1104 static int hotmod_handler(const char *val, struct kernel_param *kp);
1106 module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
1107 MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See"
1108 " Documentation/IPMI.txt in the kernel sources for the"
1111 module_param_named(trydefaults, si_trydefaults, bool, 0);
1112 MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
1113 " default scan of the KCS and SMIC interface at the standard"
1115 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
1116 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
1117 " interface separated by commas. The types are 'kcs',"
1118 " 'smic', and 'bt'. For example si_type=kcs,bt will set"
1119 " the first interface to kcs and the second to bt");
1120 module_param_array(addrs, ulong, &num_addrs, 0);
1121 MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
1122 " addresses separated by commas. Only use if an interface"
1123 " is in memory. Otherwise, set it to zero or leave"
1125 module_param_array(ports, uint, &num_ports, 0);
1126 MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
1127 " addresses separated by commas. Only use if an interface"
1128 " is a port. Otherwise, set it to zero or leave"
1130 module_param_array(irqs, int, &num_irqs, 0);
1131 MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
1132 " addresses separated by commas. Only use if an interface"
1133 " has an interrupt. Otherwise, set it to zero or leave"
1135 module_param_array(regspacings, int, &num_regspacings, 0);
1136 MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
1137 " and each successive register used by the interface. For"
1138 " instance, if the start address is 0xca2 and the spacing"
1139 " is 2, then the second address is at 0xca4. Defaults"
1141 module_param_array(regsizes, int, &num_regsizes, 0);
1142 MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
1143 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1144 " 16-bit, 32-bit, or 64-bit register. Use this if you"
1145 " the 8-bit IPMI register has to be read from a larger"
1147 module_param_array(regshifts, int, &num_regshifts, 0);
1148 MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
1149 " IPMI register, in bits. For instance, if the data"
1150 " is read from a 32-bit word and the IPMI data is in"
1151 " bit 8-15, then the shift would be 8");
1152 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1153 MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
1154 " the controller. Normally this is 0x20, but can be"
1155 " overridden by this parm. This is an array indexed"
1156 " by interface number.");
1157 module_param_array(force_kipmid, int, &num_force_kipmid, 0);
1158 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
1159 " disabled(0). Normally the IPMI driver auto-detects"
1160 " this, but the value may be overridden by this parm.");
1161 module_param(unload_when_empty, int, 0);
1162 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
1163 " specified or found, default is 1. Setting to 0"
1164 " is useful for hot add of devices using hotmod.");
1167 static void std_irq_cleanup(struct smi_info *info)
1169 if (info->si_type == SI_BT)
1170 /* Disable the interrupt in the BT interface. */
1171 info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
1172 free_irq(info->irq, info);
1175 static int std_irq_setup(struct smi_info *info)
1182 if (info->si_type == SI_BT) {
1183 rv = request_irq(info->irq,
1185 IRQF_SHARED | IRQF_DISABLED,
1189 /* Enable the interrupt in the BT interface. */
1190 info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
1191 IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1193 rv = request_irq(info->irq,
1195 IRQF_SHARED | IRQF_DISABLED,
1200 "ipmi_si: %s unable to claim interrupt %d,"
1201 " running polled\n",
1202 DEVICE_NAME, info->irq);
1205 info->irq_cleanup = std_irq_cleanup;
1206 printk(" Using irq %d\n", info->irq);
1212 static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
1214 unsigned int addr = io->addr_data;
1216 return inb(addr + (offset * io->regspacing));
1219 static void port_outb(struct si_sm_io *io, unsigned int offset,
1222 unsigned int addr = io->addr_data;
1224 outb(b, addr + (offset * io->regspacing));
1227 static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
1229 unsigned int addr = io->addr_data;
1231 return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1234 static void port_outw(struct si_sm_io *io, unsigned int offset,
1237 unsigned int addr = io->addr_data;
1239 outw(b << io->regshift, addr + (offset * io->regspacing));
1242 static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
1244 unsigned int addr = io->addr_data;
1246 return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1249 static void port_outl(struct si_sm_io *io, unsigned int offset,
1252 unsigned int addr = io->addr_data;
1254 outl(b << io->regshift, addr+(offset * io->regspacing));
1257 static void port_cleanup(struct smi_info *info)
1259 unsigned int addr = info->io.addr_data;
1263 for (idx = 0; idx < info->io_size; idx++) {
1264 release_region(addr + idx * info->io.regspacing,
1270 static int port_setup(struct smi_info *info)
1272 unsigned int addr = info->io.addr_data;
1278 info->io_cleanup = port_cleanup;
1280 /* Figure out the actual inb/inw/inl/etc routine to use based
1281 upon the register size. */
1282 switch (info->io.regsize) {
1284 info->io.inputb = port_inb;
1285 info->io.outputb = port_outb;
1288 info->io.inputb = port_inw;
1289 info->io.outputb = port_outw;
1292 info->io.inputb = port_inl;
1293 info->io.outputb = port_outl;
1296 printk("ipmi_si: Invalid register size: %d\n",
1301 /* Some BIOSes reserve disjoint I/O regions in their ACPI
1302 * tables. This causes problems when trying to register the
1303 * entire I/O region. Therefore we must register each I/O
1306 for (idx = 0; idx < info->io_size; idx++) {
1307 if (request_region(addr + idx * info->io.regspacing,
1308 info->io.regsize, DEVICE_NAME) == NULL) {
1309 /* Undo allocations */
1311 release_region(addr + idx * info->io.regspacing,
1320 static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
1322 return readb((io->addr)+(offset * io->regspacing));
1325 static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
1328 writeb(b, (io->addr)+(offset * io->regspacing));
1331 static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
1333 return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
1337 static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
1340 writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
1343 static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
1345 return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
1349 static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
1352 writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
1356 static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
1358 return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
1362 static void mem_outq(struct si_sm_io *io, unsigned int offset,
1365 writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
1369 static void mem_cleanup(struct smi_info *info)
1371 unsigned long addr = info->io.addr_data;
1374 if (info->io.addr) {
1375 iounmap(info->io.addr);
1377 mapsize = ((info->io_size * info->io.regspacing)
1378 - (info->io.regspacing - info->io.regsize));
1380 release_mem_region(addr, mapsize);
1384 static int mem_setup(struct smi_info *info)
1386 unsigned long addr = info->io.addr_data;
1392 info->io_cleanup = mem_cleanup;
1394 /* Figure out the actual readb/readw/readl/etc routine to use based
1395 upon the register size. */
1396 switch (info->io.regsize) {
1398 info->io.inputb = intf_mem_inb;
1399 info->io.outputb = intf_mem_outb;
1402 info->io.inputb = intf_mem_inw;
1403 info->io.outputb = intf_mem_outw;
1406 info->io.inputb = intf_mem_inl;
1407 info->io.outputb = intf_mem_outl;
1411 info->io.inputb = mem_inq;
1412 info->io.outputb = mem_outq;
1416 printk("ipmi_si: Invalid register size: %d\n",
1421 /* Calculate the total amount of memory to claim. This is an
1422 * unusual looking calculation, but it avoids claiming any
1423 * more memory than it has to. It will claim everything
1424 * between the first address to the end of the last full
1426 mapsize = ((info->io_size * info->io.regspacing)
1427 - (info->io.regspacing - info->io.regsize));
1429 if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
1432 info->io.addr = ioremap(addr, mapsize);
1433 if (info->io.addr == NULL) {
1434 release_mem_region(addr, mapsize);
1441 * Parms come in as <op1>[:op2[:op3...]]. ops are:
1442 * add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
1450 enum hotmod_op { HM_ADD, HM_REMOVE };
1451 struct hotmod_vals {
1455 static struct hotmod_vals hotmod_ops[] = {
1457 { "remove", HM_REMOVE },
1460 static struct hotmod_vals hotmod_si[] = {
1462 { "smic", SI_SMIC },
1466 static struct hotmod_vals hotmod_as[] = {
1467 { "mem", IPMI_MEM_ADDR_SPACE },
1468 { "i/o", IPMI_IO_ADDR_SPACE },
1472 static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
1477 s = strchr(*curr, ',');
1479 printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
1484 for (i = 0; hotmod_ops[i].name; i++) {
1485 if (strcmp(*curr, v[i].name) == 0) {
1492 printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
1496 static int check_hotmod_int_op(const char *curr, const char *option,
1497 const char *name, int *val)
1501 if (strcmp(curr, name) == 0) {
1503 printk(KERN_WARNING PFX
1504 "No option given for '%s'\n",
1508 *val = simple_strtoul(option, &n, 0);
1509 if ((*n != '\0') || (*option == '\0')) {
1510 printk(KERN_WARNING PFX
1511 "Bad option given for '%s'\n",
1520 static int hotmod_handler(const char *val, struct kernel_param *kp)
1522 char *str = kstrdup(val, GFP_KERNEL);
1524 char *next, *curr, *s, *n, *o;
1526 enum si_type si_type;
1536 struct smi_info *info;
1541 /* Kill any trailing spaces, as we can get a "\n" from echo. */
1544 while ((ival >= 0) && isspace(str[ival])) {
1549 for (curr = str; curr; curr = next) {
1556 next = strchr(curr, ':');
1562 rv = parse_str(hotmod_ops, &ival, "operation", &curr);
1567 rv = parse_str(hotmod_si, &ival, "interface type", &curr);
1572 rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
1576 s = strchr(curr, ',');
1581 addr = simple_strtoul(curr, &n, 0);
1582 if ((*n != '\0') || (*curr == '\0')) {
1583 printk(KERN_WARNING PFX "Invalid hotmod address"
1590 s = strchr(curr, ',');
1595 o = strchr(curr, '=');
1600 rv = check_hotmod_int_op(curr, o, "rsp", ®spacing);
1605 rv = check_hotmod_int_op(curr, o, "rsi", ®size);
1610 rv = check_hotmod_int_op(curr, o, "rsh", ®shift);
1615 rv = check_hotmod_int_op(curr, o, "irq", &irq);
1620 rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
1627 printk(KERN_WARNING PFX
1628 "Invalid hotmod option '%s'\n",
1634 info = kzalloc(sizeof(*info), GFP_KERNEL);
1640 info->addr_source = "hotmod";
1641 info->si_type = si_type;
1642 info->io.addr_data = addr;
1643 info->io.addr_type = addr_space;
1644 if (addr_space == IPMI_MEM_ADDR_SPACE)
1645 info->io_setup = mem_setup;
1647 info->io_setup = port_setup;
1649 info->io.addr = NULL;
1650 info->io.regspacing = regspacing;
1651 if (!info->io.regspacing)
1652 info->io.regspacing = DEFAULT_REGSPACING;
1653 info->io.regsize = regsize;
1654 if (!info->io.regsize)
1655 info->io.regsize = DEFAULT_REGSPACING;
1656 info->io.regshift = regshift;
1659 info->irq_setup = std_irq_setup;
1660 info->slave_addr = ipmb;
1665 struct smi_info *e, *tmp_e;
1667 mutex_lock(&smi_infos_lock);
1668 list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
1669 if (e->io.addr_type != addr_space)
1671 if (e->si_type != si_type)
1673 if (e->io.addr_data == addr)
1676 mutex_unlock(&smi_infos_lock);
1685 static __devinit void hardcode_find_bmc(void)
1688 struct smi_info *info;
1690 for (i = 0; i < SI_MAX_PARMS; i++) {
1691 if (!ports[i] && !addrs[i])
1694 info = kzalloc(sizeof(*info), GFP_KERNEL);
1698 info->addr_source = "hardcoded";
1700 if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
1701 info->si_type = SI_KCS;
1702 } else if (strcmp(si_type[i], "smic") == 0) {
1703 info->si_type = SI_SMIC;
1704 } else if (strcmp(si_type[i], "bt") == 0) {
1705 info->si_type = SI_BT;
1708 "ipmi_si: Interface type specified "
1709 "for interface %d, was invalid: %s\n",
1717 info->io_setup = port_setup;
1718 info->io.addr_data = ports[i];
1719 info->io.addr_type = IPMI_IO_ADDR_SPACE;
1720 } else if (addrs[i]) {
1722 info->io_setup = mem_setup;
1723 info->io.addr_data = addrs[i];
1724 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
1727 "ipmi_si: Interface type specified "
1728 "for interface %d, "
1729 "but port and address were not set or "
1730 "set to zero.\n", i);
1735 info->io.addr = NULL;
1736 info->io.regspacing = regspacings[i];
1737 if (!info->io.regspacing)
1738 info->io.regspacing = DEFAULT_REGSPACING;
1739 info->io.regsize = regsizes[i];
1740 if (!info->io.regsize)
1741 info->io.regsize = DEFAULT_REGSPACING;
1742 info->io.regshift = regshifts[i];
1743 info->irq = irqs[i];
1745 info->irq_setup = std_irq_setup;
1753 #include <linux/acpi.h>
1755 /* Once we get an ACPI failure, we don't try any more, because we go
1756 through the tables sequentially. Once we don't find a table, there
1758 static int acpi_failure;
1760 /* For GPE-type interrupts. */
1761 static u32 ipmi_acpi_gpe(void *context)
1763 struct smi_info *smi_info = context;
1764 unsigned long flags;
1769 spin_lock_irqsave(&(smi_info->si_lock), flags);
1771 spin_lock(&smi_info->count_lock);
1772 smi_info->interrupts++;
1773 spin_unlock(&smi_info->count_lock);
1776 do_gettimeofday(&t);
1777 printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1779 smi_event_handler(smi_info, 0);
1780 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1782 return ACPI_INTERRUPT_HANDLED;
1785 static void acpi_gpe_irq_cleanup(struct smi_info *info)
1790 acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
1793 static int acpi_gpe_irq_setup(struct smi_info *info)
1800 /* FIXME - is level triggered right? */
1801 status = acpi_install_gpe_handler(NULL,
1803 ACPI_GPE_LEVEL_TRIGGERED,
1806 if (status != AE_OK) {
1808 "ipmi_si: %s unable to claim ACPI GPE %d,"
1809 " running polled\n",
1810 DEVICE_NAME, info->irq);
1814 info->irq_cleanup = acpi_gpe_irq_cleanup;
1815 printk(" Using ACPI GPE %d\n", info->irq);
1822 * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
1833 s8 CreatorRevision[4];
1836 s16 SpecificationRevision;
1839 * Bit 0 - SCI interrupt supported
1840 * Bit 1 - I/O APIC/SAPIC
1844 /* If bit 0 of InterruptType is set, then this is the SCI
1845 interrupt in the GPEx_STS register. */
1850 /* If bit 1 of InterruptType is set, then this is the I/O
1851 APIC/SAPIC interrupt. */
1852 u32 GlobalSystemInterrupt;
1854 /* The actual register address. */
1855 struct acpi_generic_address addr;
1859 s8 spmi_id[1]; /* A '\0' terminated array starts here. */
1862 static __devinit int try_init_acpi(struct SPMITable *spmi)
1864 struct smi_info *info;
1867 if (spmi->IPMIlegacy != 1) {
1868 printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
1872 if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
1873 addr_space = IPMI_MEM_ADDR_SPACE;
1875 addr_space = IPMI_IO_ADDR_SPACE;
1877 info = kzalloc(sizeof(*info), GFP_KERNEL);
1879 printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
1883 info->addr_source = "ACPI";
1885 /* Figure out the interface type. */
1886 switch (spmi->InterfaceType)
1889 info->si_type = SI_KCS;
1892 info->si_type = SI_SMIC;
1895 info->si_type = SI_BT;
1898 printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
1899 spmi->InterfaceType);
1904 if (spmi->InterruptType & 1) {
1905 /* We've got a GPE interrupt. */
1906 info->irq = spmi->GPE;
1907 info->irq_setup = acpi_gpe_irq_setup;
1908 } else if (spmi->InterruptType & 2) {
1909 /* We've got an APIC/SAPIC interrupt. */
1910 info->irq = spmi->GlobalSystemInterrupt;
1911 info->irq_setup = std_irq_setup;
1913 /* Use the default interrupt setting. */
1915 info->irq_setup = NULL;
1918 if (spmi->addr.bit_width) {
1919 /* A (hopefully) properly formed register bit width. */
1920 info->io.regspacing = spmi->addr.bit_width / 8;
1922 info->io.regspacing = DEFAULT_REGSPACING;
1924 info->io.regsize = info->io.regspacing;
1925 info->io.regshift = spmi->addr.bit_offset;
1927 if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
1928 info->io_setup = mem_setup;
1929 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
1930 } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
1931 info->io_setup = port_setup;
1932 info->io.addr_type = IPMI_IO_ADDR_SPACE;
1935 printk("ipmi_si: Unknown ACPI I/O Address type\n");
1938 info->io.addr_data = spmi->addr.address;
1945 static __devinit void acpi_find_bmc(void)
1948 struct SPMITable *spmi;
1957 for (i = 0; ; i++) {
1958 status = acpi_get_table(ACPI_SIG_SPMI, i+1,
1959 (struct acpi_table_header **)&spmi);
1960 if (status != AE_OK)
1963 try_init_acpi(spmi);
1969 struct dmi_ipmi_data
1973 unsigned long base_addr;
1979 static int __devinit decode_dmi(const struct dmi_header *dm,
1980 struct dmi_ipmi_data *dmi)
1982 const u8 *data = (const u8 *)dm;
1983 unsigned long base_addr;
1985 u8 len = dm->length;
1987 dmi->type = data[4];
1989 memcpy(&base_addr, data+8, sizeof(unsigned long));
1991 if (base_addr & 1) {
1993 base_addr &= 0xFFFE;
1994 dmi->addr_space = IPMI_IO_ADDR_SPACE;
1998 dmi->addr_space = IPMI_MEM_ADDR_SPACE;
2000 /* If bit 4 of byte 0x10 is set, then the lsb for the address
2002 dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
2004 dmi->irq = data[0x11];
2006 /* The top two bits of byte 0x10 hold the register spacing. */
2007 reg_spacing = (data[0x10] & 0xC0) >> 6;
2008 switch(reg_spacing){
2009 case 0x00: /* Byte boundaries */
2012 case 0x01: /* 32-bit boundaries */
2015 case 0x02: /* 16-byte boundaries */
2019 /* Some other interface, just ignore it. */
2024 /* Note that technically, the lower bit of the base
2025 * address should be 1 if the address is I/O and 0 if
2026 * the address is in memory. So many systems get that
2027 * wrong (and all that I have seen are I/O) so we just
2028 * ignore that bit and assume I/O. Systems that use
2029 * memory should use the newer spec, anyway. */
2030 dmi->base_addr = base_addr & 0xfffe;
2031 dmi->addr_space = IPMI_IO_ADDR_SPACE;
2035 dmi->slave_addr = data[6];
2040 static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
2042 struct smi_info *info;
2044 info = kzalloc(sizeof(*info), GFP_KERNEL);
2047 "ipmi_si: Could not allocate SI data\n");
2051 info->addr_source = "SMBIOS";
2053 switch (ipmi_data->type) {
2054 case 0x01: /* KCS */
2055 info->si_type = SI_KCS;
2057 case 0x02: /* SMIC */
2058 info->si_type = SI_SMIC;
2061 info->si_type = SI_BT;
2068 switch (ipmi_data->addr_space) {
2069 case IPMI_MEM_ADDR_SPACE:
2070 info->io_setup = mem_setup;
2071 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2074 case IPMI_IO_ADDR_SPACE:
2075 info->io_setup = port_setup;
2076 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2082 "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
2083 ipmi_data->addr_space);
2086 info->io.addr_data = ipmi_data->base_addr;
2088 info->io.regspacing = ipmi_data->offset;
2089 if (!info->io.regspacing)
2090 info->io.regspacing = DEFAULT_REGSPACING;
2091 info->io.regsize = DEFAULT_REGSPACING;
2092 info->io.regshift = 0;
2094 info->slave_addr = ipmi_data->slave_addr;
2096 info->irq = ipmi_data->irq;
2098 info->irq_setup = std_irq_setup;
2103 static void __devinit dmi_find_bmc(void)
2105 const struct dmi_device *dev = NULL;
2106 struct dmi_ipmi_data data;
2109 while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
2110 memset(&data, 0, sizeof(data));
2111 rv = decode_dmi((const struct dmi_header *) dev->device_data,
2114 try_init_dmi(&data);
2117 #endif /* CONFIG_DMI */
2121 #define PCI_ERMC_CLASSCODE 0x0C0700
2122 #define PCI_ERMC_CLASSCODE_MASK 0xffffff00
2123 #define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
2124 #define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
2125 #define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
2126 #define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
2128 #define PCI_HP_VENDOR_ID 0x103C
2129 #define PCI_MMC_DEVICE_ID 0x121A
2130 #define PCI_MMC_ADDR_CW 0x10
2132 static void ipmi_pci_cleanup(struct smi_info *info)
2134 struct pci_dev *pdev = info->addr_source_data;
2136 pci_disable_device(pdev);
2139 static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
2140 const struct pci_device_id *ent)
2143 int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
2144 struct smi_info *info;
2145 int first_reg_offset = 0;
2147 info = kzalloc(sizeof(*info), GFP_KERNEL);
2151 info->addr_source = "PCI";
2153 switch (class_type) {
2154 case PCI_ERMC_CLASSCODE_TYPE_SMIC:
2155 info->si_type = SI_SMIC;
2158 case PCI_ERMC_CLASSCODE_TYPE_KCS:
2159 info->si_type = SI_KCS;
2162 case PCI_ERMC_CLASSCODE_TYPE_BT:
2163 info->si_type = SI_BT;
2168 printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
2169 pci_name(pdev), class_type);
2173 rv = pci_enable_device(pdev);
2175 printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
2181 info->addr_source_cleanup = ipmi_pci_cleanup;
2182 info->addr_source_data = pdev;
2184 if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID)
2185 first_reg_offset = 1;
2187 if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
2188 info->io_setup = port_setup;
2189 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2191 info->io_setup = mem_setup;
2192 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2194 info->io.addr_data = pci_resource_start(pdev, 0);
2196 info->io.regspacing = DEFAULT_REGSPACING;
2197 info->io.regsize = DEFAULT_REGSPACING;
2198 info->io.regshift = 0;
2200 info->irq = pdev->irq;
2202 info->irq_setup = std_irq_setup;
2204 info->dev = &pdev->dev;
2205 pci_set_drvdata(pdev, info);
2207 return try_smi_init(info);
2210 static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
2212 struct smi_info *info = pci_get_drvdata(pdev);
2213 cleanup_one_si(info);
2217 static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
2222 static int ipmi_pci_resume(struct pci_dev *pdev)
2228 static struct pci_device_id ipmi_pci_devices[] = {
2229 { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
2230 { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
2233 MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
2235 static struct pci_driver ipmi_pci_driver = {
2236 .name = DEVICE_NAME,
2237 .id_table = ipmi_pci_devices,
2238 .probe = ipmi_pci_probe,
2239 .remove = __devexit_p(ipmi_pci_remove),
2241 .suspend = ipmi_pci_suspend,
2242 .resume = ipmi_pci_resume,
2245 #endif /* CONFIG_PCI */
2248 #ifdef CONFIG_PPC_OF
2249 static int __devinit ipmi_of_probe(struct of_device *dev,
2250 const struct of_device_id *match)
2252 struct smi_info *info;
2253 struct resource resource;
2254 const int *regsize, *regspacing, *regshift;
2255 struct device_node *np = dev->node;
2259 dev_info(&dev->dev, PFX "probing via device tree\n");
2261 ret = of_address_to_resource(np, 0, &resource);
2263 dev_warn(&dev->dev, PFX "invalid address from OF\n");
2267 regsize = of_get_property(np, "reg-size", &proplen);
2268 if (regsize && proplen != 4) {
2269 dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
2273 regspacing = of_get_property(np, "reg-spacing", &proplen);
2274 if (regspacing && proplen != 4) {
2275 dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
2279 regshift = of_get_property(np, "reg-shift", &proplen);
2280 if (regshift && proplen != 4) {
2281 dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
2285 info = kzalloc(sizeof(*info), GFP_KERNEL);
2289 PFX "could not allocate memory for OF probe\n");
2293 info->si_type = (enum si_type) match->data;
2294 info->addr_source = "device-tree";
2295 info->io_setup = mem_setup;
2296 info->irq_setup = std_irq_setup;
2298 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2299 info->io.addr_data = resource.start;
2301 info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE;
2302 info->io.regspacing = regspacing ? *regspacing : DEFAULT_REGSPACING;
2303 info->io.regshift = regshift ? *regshift : 0;
2305 info->irq = irq_of_parse_and_map(dev->node, 0);
2306 info->dev = &dev->dev;
2308 dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
2309 info->io.addr_data, info->io.regsize, info->io.regspacing,
2312 dev->dev.driver_data = (void*) info;
2314 return try_smi_init(info);
2317 static int __devexit ipmi_of_remove(struct of_device *dev)
2319 cleanup_one_si(dev->dev.driver_data);
2323 static struct of_device_id ipmi_match[] =
2325 { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS },
2326 { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC },
2327 { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT },
2331 static struct of_platform_driver ipmi_of_platform_driver =
2334 .match_table = ipmi_match,
2335 .probe = ipmi_of_probe,
2336 .remove = __devexit_p(ipmi_of_remove),
2338 #endif /* CONFIG_PPC_OF */
2341 static int try_get_dev_id(struct smi_info *smi_info)
2343 unsigned char msg[2];
2344 unsigned char *resp;
2345 unsigned long resp_len;
2346 enum si_sm_result smi_result;
2349 resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
2353 /* Do a Get Device ID command, since it comes back with some
2355 msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2356 msg[1] = IPMI_GET_DEVICE_ID_CMD;
2357 smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
2359 smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
2362 if (smi_result == SI_SM_CALL_WITH_DELAY ||
2363 smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
2364 schedule_timeout_uninterruptible(1);
2365 smi_result = smi_info->handlers->event(
2366 smi_info->si_sm, 100);
2368 else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
2370 smi_result = smi_info->handlers->event(
2371 smi_info->si_sm, 0);
2376 if (smi_result == SI_SM_HOSED) {
2377 /* We couldn't get the state machine to run, so whatever's at
2378 the port is probably not an IPMI SMI interface. */
2383 /* Otherwise, we got some data. */
2384 resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2385 resp, IPMI_MAX_MSG_LENGTH);
2387 /* Check and record info from the get device id, in case we need it. */
2388 rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id);
2395 static int type_file_read_proc(char *page, char **start, off_t off,
2396 int count, int *eof, void *data)
2398 struct smi_info *smi = data;
2400 return sprintf(page, "%s\n", si_to_str[smi->si_type]);
2403 static int stat_file_read_proc(char *page, char **start, off_t off,
2404 int count, int *eof, void *data)
2406 char *out = (char *) page;
2407 struct smi_info *smi = data;
2409 out += sprintf(out, "interrupts_enabled: %d\n",
2410 smi->irq && !smi->interrupt_disabled);
2411 out += sprintf(out, "short_timeouts: %ld\n",
2412 smi->short_timeouts);
2413 out += sprintf(out, "long_timeouts: %ld\n",
2414 smi->long_timeouts);
2415 out += sprintf(out, "timeout_restarts: %ld\n",
2416 smi->timeout_restarts);
2417 out += sprintf(out, "idles: %ld\n",
2419 out += sprintf(out, "interrupts: %ld\n",
2421 out += sprintf(out, "attentions: %ld\n",
2423 out += sprintf(out, "flag_fetches: %ld\n",
2425 out += sprintf(out, "hosed_count: %ld\n",
2427 out += sprintf(out, "complete_transactions: %ld\n",
2428 smi->complete_transactions);
2429 out += sprintf(out, "events: %ld\n",
2431 out += sprintf(out, "watchdog_pretimeouts: %ld\n",
2432 smi->watchdog_pretimeouts);
2433 out += sprintf(out, "incoming_messages: %ld\n",
2434 smi->incoming_messages);
2439 static int param_read_proc(char *page, char **start, off_t off,
2440 int count, int *eof, void *data)
2442 struct smi_info *smi = data;
2444 return sprintf(page,
2445 "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
2446 si_to_str[smi->si_type],
2447 addr_space_to_str[smi->io.addr_type],
2457 * oem_data_avail_to_receive_msg_avail
2458 * @info - smi_info structure with msg_flags set
2460 * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
2461 * Returns 1 indicating need to re-run handle_flags().
2463 static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
2465 smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
2471 * setup_dell_poweredge_oem_data_handler
2472 * @info - smi_info.device_id must be populated
2474 * Systems that match, but have firmware version < 1.40 may assert
2475 * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
2476 * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL
2477 * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
2478 * as RECEIVE_MSG_AVAIL instead.
2480 * As Dell has no plans to release IPMI 1.5 firmware that *ever*
2481 * assert the OEM[012] bits, and if it did, the driver would have to
2482 * change to handle that properly, we don't actually check for the
2484 * Device ID = 0x20 BMC on PowerEdge 8G servers
2485 * Device Revision = 0x80
2486 * Firmware Revision1 = 0x01 BMC version 1.40
2487 * Firmware Revision2 = 0x40 BCD encoded
2488 * IPMI Version = 0x51 IPMI 1.5
2489 * Manufacturer ID = A2 02 00 Dell IANA
2491 * Additionally, PowerEdge systems with IPMI < 1.5 may also assert
2492 * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
2495 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20
2496 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
2497 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
2498 #define DELL_IANA_MFR_ID 0x0002a2
2499 static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
2501 struct ipmi_device_id *id = &smi_info->device_id;
2502 if (id->manufacturer_id == DELL_IANA_MFR_ID) {
2503 if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID &&
2504 id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
2505 id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
2506 smi_info->oem_data_avail_handler =
2507 oem_data_avail_to_receive_msg_avail;
2509 else if (ipmi_version_major(id) < 1 ||
2510 (ipmi_version_major(id) == 1 &&
2511 ipmi_version_minor(id) < 5)) {
2512 smi_info->oem_data_avail_handler =
2513 oem_data_avail_to_receive_msg_avail;
2518 #define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
2519 static void return_hosed_msg_badsize(struct smi_info *smi_info)
2521 struct ipmi_smi_msg *msg = smi_info->curr_msg;
2523 /* Make it a reponse */
2524 msg->rsp[0] = msg->data[0] | 4;
2525 msg->rsp[1] = msg->data[1];
2526 msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
2528 smi_info->curr_msg = NULL;
2529 deliver_recv_msg(smi_info, msg);
2533 * dell_poweredge_bt_xaction_handler
2534 * @info - smi_info.device_id must be populated
2536 * Dell PowerEdge servers with the BT interface (x6xx and 1750) will
2537 * not respond to a Get SDR command if the length of the data
2538 * requested is exactly 0x3A, which leads to command timeouts and no
2539 * data returned. This intercepts such commands, and causes userspace
2540 * callers to try again with a different-sized buffer, which succeeds.
2543 #define STORAGE_NETFN 0x0A
2544 #define STORAGE_CMD_GET_SDR 0x23
2545 static int dell_poweredge_bt_xaction_handler(struct notifier_block *self,
2546 unsigned long unused,
2549 struct smi_info *smi_info = in;
2550 unsigned char *data = smi_info->curr_msg->data;
2551 unsigned int size = smi_info->curr_msg->data_size;
2553 (data[0]>>2) == STORAGE_NETFN &&
2554 data[1] == STORAGE_CMD_GET_SDR &&
2556 return_hosed_msg_badsize(smi_info);
2562 static struct notifier_block dell_poweredge_bt_xaction_notifier = {
2563 .notifier_call = dell_poweredge_bt_xaction_handler,
2567 * setup_dell_poweredge_bt_xaction_handler
2568 * @info - smi_info.device_id must be filled in already
2570 * Fills in smi_info.device_id.start_transaction_pre_hook
2571 * when we know what function to use there.
2574 setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info)
2576 struct ipmi_device_id *id = &smi_info->device_id;
2577 if (id->manufacturer_id == DELL_IANA_MFR_ID &&
2578 smi_info->si_type == SI_BT)
2579 register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
2583 * setup_oem_data_handler
2584 * @info - smi_info.device_id must be filled in already
2586 * Fills in smi_info.device_id.oem_data_available_handler
2587 * when we know what function to use there.
2590 static void setup_oem_data_handler(struct smi_info *smi_info)
2592 setup_dell_poweredge_oem_data_handler(smi_info);
2595 static void setup_xaction_handlers(struct smi_info *smi_info)
2597 setup_dell_poweredge_bt_xaction_handler(smi_info);
2600 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
2602 if (smi_info->intf) {
2603 /* The timer and thread are only running if the
2604 interface has been started up and registered. */
2605 if (smi_info->thread != NULL)
2606 kthread_stop(smi_info->thread);
2607 del_timer_sync(&smi_info->si_timer);
2611 static __devinitdata struct ipmi_default_vals
2617 { .type = SI_KCS, .port = 0xca2 },
2618 { .type = SI_SMIC, .port = 0xca9 },
2619 { .type = SI_BT, .port = 0xe4 },
2623 static __devinit void default_find_bmc(void)
2625 struct smi_info *info;
2628 for (i = 0; ; i++) {
2629 if (!ipmi_defaults[i].port)
2632 info = kzalloc(sizeof(*info), GFP_KERNEL);
2636 #ifdef CONFIG_PPC_MERGE
2637 if (check_legacy_ioport(ipmi_defaults[i].port))
2641 info->addr_source = NULL;
2643 info->si_type = ipmi_defaults[i].type;
2644 info->io_setup = port_setup;
2645 info->io.addr_data = ipmi_defaults[i].port;
2646 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2648 info->io.addr = NULL;
2649 info->io.regspacing = DEFAULT_REGSPACING;
2650 info->io.regsize = DEFAULT_REGSPACING;
2651 info->io.regshift = 0;
2653 if (try_smi_init(info) == 0) {
2655 printk(KERN_INFO "ipmi_si: Found default %s state"
2656 " machine at %s address 0x%lx\n",
2657 si_to_str[info->si_type],
2658 addr_space_to_str[info->io.addr_type],
2659 info->io.addr_data);
2665 static int is_new_interface(struct smi_info *info)
2669 list_for_each_entry(e, &smi_infos, link) {
2670 if (e->io.addr_type != info->io.addr_type)
2672 if (e->io.addr_data == info->io.addr_data)
2679 static int try_smi_init(struct smi_info *new_smi)
2683 if (new_smi->addr_source) {
2684 printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
2685 " machine at %s address 0x%lx, slave address 0x%x,"
2687 new_smi->addr_source,
2688 si_to_str[new_smi->si_type],
2689 addr_space_to_str[new_smi->io.addr_type],
2690 new_smi->io.addr_data,
2691 new_smi->slave_addr, new_smi->irq);
2694 mutex_lock(&smi_infos_lock);
2695 if (!is_new_interface(new_smi)) {
2696 printk(KERN_WARNING "ipmi_si: duplicate interface\n");
2701 /* So we know not to free it unless we have allocated one. */
2702 new_smi->intf = NULL;
2703 new_smi->si_sm = NULL;
2704 new_smi->handlers = NULL;
2706 switch (new_smi->si_type) {
2708 new_smi->handlers = &kcs_smi_handlers;
2712 new_smi->handlers = &smic_smi_handlers;
2716 new_smi->handlers = &bt_smi_handlers;
2720 /* No support for anything else yet. */
2725 /* Allocate the state machine's data and initialize it. */
2726 new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
2727 if (!new_smi->si_sm) {
2728 printk(" Could not allocate state machine memory\n");
2732 new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm,
2735 /* Now that we know the I/O size, we can set up the I/O. */
2736 rv = new_smi->io_setup(new_smi);
2738 printk(" Could not set up I/O space\n");
2742 spin_lock_init(&(new_smi->si_lock));
2743 spin_lock_init(&(new_smi->msg_lock));
2744 spin_lock_init(&(new_smi->count_lock));
2746 /* Do low-level detection first. */
2747 if (new_smi->handlers->detect(new_smi->si_sm)) {
2748 if (new_smi->addr_source)
2749 printk(KERN_INFO "ipmi_si: Interface detection"
2755 /* Attempt a get device id command. If it fails, we probably
2756 don't have a BMC here. */
2757 rv = try_get_dev_id(new_smi);
2759 if (new_smi->addr_source)
2760 printk(KERN_INFO "ipmi_si: There appears to be no BMC"
2761 " at this location\n");
2765 setup_oem_data_handler(new_smi);
2766 setup_xaction_handlers(new_smi);
2768 INIT_LIST_HEAD(&(new_smi->xmit_msgs));
2769 INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
2770 new_smi->curr_msg = NULL;
2771 atomic_set(&new_smi->req_events, 0);
2772 new_smi->run_to_completion = 0;
2774 new_smi->interrupt_disabled = 0;
2775 atomic_set(&new_smi->stop_operation, 0);
2776 new_smi->intf_num = smi_num;
2779 /* Start clearing the flags before we enable interrupts or the
2780 timer to avoid racing with the timer. */
2781 start_clear_flags(new_smi);
2782 /* IRQ is defined to be set when non-zero. */
2784 new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
2786 if (!new_smi->dev) {
2787 /* If we don't already have a device from something
2788 * else (like PCI), then register a new one. */
2789 new_smi->pdev = platform_device_alloc("ipmi_si",
2794 " Unable to allocate platform device\n");
2797 new_smi->dev = &new_smi->pdev->dev;
2798 new_smi->dev->driver = &ipmi_driver;
2800 rv = platform_device_add(new_smi->pdev);
2804 " Unable to register system interface device:"
2809 new_smi->dev_registered = 1;
2812 rv = ipmi_register_smi(&handlers,
2814 &new_smi->device_id,
2817 new_smi->slave_addr);
2820 "ipmi_si: Unable to register device: error %d\n",
2822 goto out_err_stop_timer;
2825 rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
2826 type_file_read_proc, NULL,
2827 new_smi, THIS_MODULE);
2830 "ipmi_si: Unable to create proc entry: %d\n",
2832 goto out_err_stop_timer;
2835 rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
2836 stat_file_read_proc, NULL,
2837 new_smi, THIS_MODULE);
2840 "ipmi_si: Unable to create proc entry: %d\n",
2842 goto out_err_stop_timer;
2845 rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
2846 param_read_proc, NULL,
2847 new_smi, THIS_MODULE);
2850 "ipmi_si: Unable to create proc entry: %d\n",
2852 goto out_err_stop_timer;
2855 list_add_tail(&new_smi->link, &smi_infos);
2857 mutex_unlock(&smi_infos_lock);
2859 printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
2864 atomic_inc(&new_smi->stop_operation);
2865 wait_for_timer_and_thread(new_smi);
2869 ipmi_unregister_smi(new_smi->intf);
2871 if (new_smi->irq_cleanup)
2872 new_smi->irq_cleanup(new_smi);
2874 /* Wait until we know that we are out of any interrupt
2875 handlers might have been running before we freed the
2877 synchronize_sched();
2879 if (new_smi->si_sm) {
2880 if (new_smi->handlers)
2881 new_smi->handlers->cleanup(new_smi->si_sm);
2882 kfree(new_smi->si_sm);
2884 if (new_smi->addr_source_cleanup)
2885 new_smi->addr_source_cleanup(new_smi);
2886 if (new_smi->io_cleanup)
2887 new_smi->io_cleanup(new_smi);
2889 if (new_smi->dev_registered)
2890 platform_device_unregister(new_smi->pdev);
2894 mutex_unlock(&smi_infos_lock);
2899 static __devinit int init_ipmi_si(void)
2909 /* Register the device drivers. */
2910 rv = driver_register(&ipmi_driver);
2913 "init_ipmi_si: Unable to register driver: %d\n",
2919 /* Parse out the si_type string into its components. */
2922 for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
2924 str = strchr(str, ',');
2934 printk(KERN_INFO "IPMI System Interface driver.\n");
2936 hardcode_find_bmc();
2947 rv = pci_register_driver(&ipmi_pci_driver);
2950 "init_ipmi_si: Unable to register PCI driver: %d\n",
2955 #ifdef CONFIG_PPC_OF
2956 of_register_platform_driver(&ipmi_of_platform_driver);
2959 if (si_trydefaults) {
2960 mutex_lock(&smi_infos_lock);
2961 if (list_empty(&smi_infos)) {
2962 /* No BMC was found, try defaults. */
2963 mutex_unlock(&smi_infos_lock);
2966 mutex_unlock(&smi_infos_lock);
2970 mutex_lock(&smi_infos_lock);
2971 if (unload_when_empty && list_empty(&smi_infos)) {
2972 mutex_unlock(&smi_infos_lock);
2974 pci_unregister_driver(&ipmi_pci_driver);
2977 #ifdef CONFIG_PPC_OF
2978 of_unregister_platform_driver(&ipmi_of_platform_driver);
2980 driver_unregister(&ipmi_driver);
2981 printk("ipmi_si: Unable to find any System Interface(s)\n");
2984 mutex_unlock(&smi_infos_lock);
2988 module_init(init_ipmi_si);
2990 static void cleanup_one_si(struct smi_info *to_clean)
2993 unsigned long flags;
2998 list_del(&to_clean->link);
3000 /* Tell the driver that we are shutting down. */
3001 atomic_inc(&to_clean->stop_operation);
3003 /* Make sure the timer and thread are stopped and will not run
3005 wait_for_timer_and_thread(to_clean);
3007 /* Timeouts are stopped, now make sure the interrupts are off
3008 for the device. A little tricky with locks to make sure
3009 there are no races. */
3010 spin_lock_irqsave(&to_clean->si_lock, flags);
3011 while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3012 spin_unlock_irqrestore(&to_clean->si_lock, flags);
3014 schedule_timeout_uninterruptible(1);
3015 spin_lock_irqsave(&to_clean->si_lock, flags);
3017 disable_si_irq(to_clean);
3018 spin_unlock_irqrestore(&to_clean->si_lock, flags);
3019 while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3021 schedule_timeout_uninterruptible(1);
3024 /* Clean up interrupts and make sure that everything is done. */
3025 if (to_clean->irq_cleanup)
3026 to_clean->irq_cleanup(to_clean);
3027 while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3029 schedule_timeout_uninterruptible(1);
3032 rv = ipmi_unregister_smi(to_clean->intf);
3035 "ipmi_si: Unable to unregister device: errno=%d\n",
3039 to_clean->handlers->cleanup(to_clean->si_sm);
3041 kfree(to_clean->si_sm);
3043 if (to_clean->addr_source_cleanup)
3044 to_clean->addr_source_cleanup(to_clean);
3045 if (to_clean->io_cleanup)
3046 to_clean->io_cleanup(to_clean);
3048 if (to_clean->dev_registered)
3049 platform_device_unregister(to_clean->pdev);
3054 static __exit void cleanup_ipmi_si(void)
3056 struct smi_info *e, *tmp_e;
3062 pci_unregister_driver(&ipmi_pci_driver);
3065 #ifdef CONFIG_PPC_OF
3066 of_unregister_platform_driver(&ipmi_of_platform_driver);
3069 mutex_lock(&smi_infos_lock);
3070 list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
3072 mutex_unlock(&smi_infos_lock);
3074 driver_unregister(&ipmi_driver);
3076 module_exit(cleanup_ipmi_si);
3078 MODULE_LICENSE("GPL");
3079 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
3080 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");