libata: PATA-mode fixes for sis_sata
[safe/jmp/linux-2.6] / drivers / ata / sata_sis.c
1 /*
2  *  sata_sis.c - Silicon Integrated Systems SATA
3  *
4  *  Maintained by:  Uwe Koziolek
5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
6  *                  on emails.
7  *
8  *  Copyright 2004 Uwe Koziolek
9  *
10  *
11  *  This program is free software; you can redistribute it and/or modify
12  *  it under the terms of the GNU General Public License as published by
13  *  the Free Software Foundation; either version 2, or (at your option)
14  *  any later version.
15  *
16  *  This program is distributed in the hope that it will be useful,
17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *  GNU General Public License for more details.
20  *
21  *  You should have received a copy of the GNU General Public License
22  *  along with this program; see the file COPYING.  If not, write to
23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
24  *
25  *
26  *  libata documentation is available via 'make {ps|pdf}docs',
27  *  as Documentation/DocBook/libata.*
28  *
29  *  Hardware documentation available under NDA.
30  *
31  */
32
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/pci.h>
36 #include <linux/init.h>
37 #include <linux/blkdev.h>
38 #include <linux/delay.h>
39 #include <linux/interrupt.h>
40 #include <linux/device.h>
41 #include <scsi/scsi_host.h>
42 #include <linux/libata.h>
43 #include "sis.h"
44
45 #define DRV_NAME        "sata_sis"
46 #define DRV_VERSION     "0.8"
47
48 enum {
49         sis_180                 = 0,
50         SIS_SCR_PCI_BAR         = 5,
51
52         /* PCI configuration registers */
53         SIS_GENCTL              = 0x54, /* IDE General Control register */
54         SIS_SCR_BASE            = 0xc0, /* sata0 phy SCR registers */
55         SIS180_SATA1_OFS        = 0x10, /* offset from sata0->sata1 phy regs */
56         SIS182_SATA1_OFS        = 0x20, /* offset from sata0->sata1 phy regs */
57         SIS_PMR                 = 0x90, /* port mapping register */
58         SIS_PMR_COMBINED        = 0x30,
59
60         /* random bits */
61         SIS_FLAG_CFGSCR         = (1 << 30), /* host flag: SCRs via PCI cfg */
62
63         GENCTL_IOMAPPED_SCR     = (1 << 26), /* if set, SCRs are in IO space */
64 };
65
66 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
67 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
68 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
69
70 static const struct pci_device_id sis_pci_tbl[] = {
71         { PCI_VDEVICE(SI, 0x0180), sis_180 },           /* SiS 964/180 */
72         { PCI_VDEVICE(SI, 0x0181), sis_180 },           /* SiS 964/180 */
73         { PCI_VDEVICE(SI, 0x0182), sis_180 },           /* SiS 965/965L */
74         { PCI_VDEVICE(SI, 0x0183), sis_180 },           /* SiS 965/965L */
75         { PCI_VDEVICE(SI, 0x1182), sis_180 },           /* SiS 966/680 */
76         { PCI_VDEVICE(SI, 0x1183), sis_180 },           /* SiS 966/966L/968/680 */
77
78         { }     /* terminate list */
79 };
80
81 static struct pci_driver sis_pci_driver = {
82         .name                   = DRV_NAME,
83         .id_table               = sis_pci_tbl,
84         .probe                  = sis_init_one,
85         .remove                 = ata_pci_remove_one,
86 };
87
88 static struct scsi_host_template sis_sht = {
89         .module                 = THIS_MODULE,
90         .name                   = DRV_NAME,
91         .ioctl                  = ata_scsi_ioctl,
92         .queuecommand           = ata_scsi_queuecmd,
93         .can_queue              = ATA_DEF_QUEUE,
94         .this_id                = ATA_SHT_THIS_ID,
95         .sg_tablesize           = ATA_MAX_PRD,
96         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
97         .emulated               = ATA_SHT_EMULATED,
98         .use_clustering         = ATA_SHT_USE_CLUSTERING,
99         .proc_name              = DRV_NAME,
100         .dma_boundary           = ATA_DMA_BOUNDARY,
101         .slave_configure        = ata_scsi_slave_config,
102         .slave_destroy          = ata_scsi_slave_destroy,
103         .bios_param             = ata_std_bios_param,
104 };
105
106 static const struct ata_port_operations sis_ops = {
107         .port_disable           = ata_port_disable,
108         .tf_load                = ata_tf_load,
109         .tf_read                = ata_tf_read,
110         .check_status           = ata_check_status,
111         .exec_command           = ata_exec_command,
112         .dev_select             = ata_std_dev_select,
113         .bmdma_setup            = ata_bmdma_setup,
114         .bmdma_start            = ata_bmdma_start,
115         .bmdma_stop             = ata_bmdma_stop,
116         .bmdma_status           = ata_bmdma_status,
117         .qc_prep                = ata_qc_prep,
118         .qc_issue               = ata_qc_issue_prot,
119         .data_xfer              = ata_data_xfer,
120         .freeze                 = ata_bmdma_freeze,
121         .thaw                   = ata_bmdma_thaw,
122         .error_handler          = ata_bmdma_error_handler,
123         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
124         .irq_clear              = ata_bmdma_irq_clear,
125         .irq_on                 = ata_irq_on,
126         .irq_ack                = ata_irq_ack,
127         .scr_read               = sis_scr_read,
128         .scr_write              = sis_scr_write,
129         .port_start             = ata_port_start,
130 };
131
132 static const struct ata_port_info sis_port_info = {
133         .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
134         .pio_mask       = 0x1f,
135         .mwdma_mask     = 0x7,
136         .udma_mask      = 0x7f,
137         .port_ops       = &sis_ops,
138 };
139
140 MODULE_AUTHOR("Uwe Koziolek");
141 MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
142 MODULE_LICENSE("GPL");
143 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
144 MODULE_VERSION(DRV_VERSION);
145
146 static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
147 {
148         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
149         unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
150         u8 pmr;
151
152         if (ap->port_no)  {
153                 switch (pdev->device) {
154                         case 0x0180:
155                         case 0x0181:
156                                 pci_read_config_byte(pdev, SIS_PMR, &pmr);
157                                 if ((pmr & SIS_PMR_COMBINED) == 0)
158                                         addr += SIS180_SATA1_OFS;
159                                 break;
160
161                         case 0x0182:
162                         case 0x0183:
163                         case 0x1182:
164                                 addr += SIS182_SATA1_OFS;
165                                 break;
166                 }
167         }
168         return addr;
169 }
170
171 static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
172 {
173         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
174         unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
175         u32 val, val2 = 0;
176         u8 pmr;
177
178         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
179                 return 0xffffffff;
180
181         pci_read_config_byte(pdev, SIS_PMR, &pmr);
182
183         pci_read_config_dword(pdev, cfg_addr, &val);
184
185         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
186             (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
187                 pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
188
189         return (val|val2) &  0xfffffffb; /* avoid problems with powerdowned ports */
190 }
191
192 static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
193 {
194         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
195         unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
196         u8 pmr;
197
198         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
199                 return;
200
201         pci_read_config_byte(pdev, SIS_PMR, &pmr);
202
203         pci_write_config_dword(pdev, cfg_addr, val);
204
205         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
206             (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
207                 pci_write_config_dword(pdev, cfg_addr+0x10, val);
208 }
209
210 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
211 {
212         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
213         u32 val, val2 = 0;
214         u8 pmr;
215
216         if (sc_reg > SCR_CONTROL)
217                 return 0xffffffffU;
218
219         if (ap->flags & SIS_FLAG_CFGSCR)
220                 return sis_scr_cfg_read(ap, sc_reg);
221
222         pci_read_config_byte(pdev, SIS_PMR, &pmr);
223
224         val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
225
226         if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
227             (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
228                 val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
229
230         return (val | val2) &  0xfffffffb;
231 }
232
233 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
234 {
235         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
236         u8 pmr;
237
238         if (sc_reg > SCR_CONTROL)
239                 return;
240
241         pci_read_config_byte(pdev, SIS_PMR, &pmr);
242
243         if (ap->flags & SIS_FLAG_CFGSCR)
244                 sis_scr_cfg_write(ap, sc_reg, val);
245         else {
246                 iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
247                 if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
248                     (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
249                         iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
250         }
251 }
252
253 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
254 {
255         static int printed_version;
256         struct ata_port_info pi = sis_port_info;
257         const struct ata_port_info *ppi[] = { &pi, &pi };
258         struct ata_host *host;
259         u32 genctl, val;
260         u8 pmr;
261         u8 port2_start = 0x20;
262         int rc;
263
264         if (!printed_version++)
265                 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
266
267         rc = pcim_enable_device(pdev);
268         if (rc)
269                 return rc;
270
271         /* check and see if the SCRs are in IO space or PCI cfg space */
272         pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
273         if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
274                 pi.flags |= SIS_FLAG_CFGSCR;
275
276         /* if hardware thinks SCRs are in IO space, but there are
277          * no IO resources assigned, change to PCI cfg space.
278          */
279         if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
280             ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
281              (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
282                 genctl &= ~GENCTL_IOMAPPED_SCR;
283                 pci_write_config_dword(pdev, SIS_GENCTL, genctl);
284                 pi.flags |= SIS_FLAG_CFGSCR;
285         }
286
287         pci_read_config_byte(pdev, SIS_PMR, &pmr);
288         switch (ent->device) {
289         case 0x0180:
290         case 0x0181:
291
292                 /* The PATA-handling is provided by pata_sis */
293                 switch (pmr & 0x30) {
294                 case 0x10:
295                         ppi[1] = &sis_info133_for_sata;
296                         break;
297
298                 case 0x30:
299                         ppi[0] = &sis_info133_for_sata;
300                         break;
301                 }
302                 if ((pmr & SIS_PMR_COMBINED) == 0) {
303                         dev_printk(KERN_INFO, &pdev->dev,
304                                    "Detected SiS 180/181/964 chipset in SATA mode\n");
305                         port2_start = 64;
306                 } else {
307                         dev_printk(KERN_INFO, &pdev->dev,
308                                    "Detected SiS 180/181 chipset in combined mode\n");
309                         port2_start=0;
310                         pi.flags |= ATA_FLAG_SLAVE_POSS;
311                 }
312                 break;
313
314         case 0x0182:
315         case 0x0183:
316                 pci_read_config_dword ( pdev, 0x6C, &val);
317                 if (val & (1L << 31)) {
318                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
319                         pi.flags |= ATA_FLAG_SLAVE_POSS;
320                 } else {
321                         dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
322                 }
323                 break;
324
325         case 0x1182:
326                 dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
327                 pi.flags |= ATA_FLAG_SLAVE_POSS;
328                 break;
329
330         case 0x1183:
331                 dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
332                 ppi[0] = &sis_info133_for_sata;
333                 ppi[1] = &sis_info133_for_sata;
334                 break;
335         }
336
337         rc = ata_pci_prepare_native_host(pdev, ppi, &host);
338         if (rc)
339                 return rc;
340
341         if (!(pi.flags & SIS_FLAG_CFGSCR)) {
342                 void __iomem *mmio;
343
344                 rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
345                 if (rc)
346                         return rc;
347                 mmio = host->iomap[SIS_SCR_PCI_BAR];
348
349                 host->ports[0]->ioaddr.scr_addr = mmio;
350                 host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
351         }
352
353         pci_set_master(pdev);
354         pci_intx(pdev, 1);
355         return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
356                                  &sis_sht);
357 }
358
359 static int __init sis_init(void)
360 {
361         return pci_register_driver(&sis_pci_driver);
362 }
363
364 static void __exit sis_exit(void)
365 {
366         pci_unregister_driver(&sis_pci_driver);
367 }
368
369 module_init(sis_init);
370 module_exit(sis_exit);