2 * sata_mv.c - Marvell SATA support
4 * Copyright 2008: Marvell Corporation, all rights reserved.
5 * Copyright 2005: EMC Corporation, all rights reserved.
6 * Copyright 2005 Red Hat, Inc. All rights reserved.
8 * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 * --> Errata workaround for NCQ device errors.
30 * --> More errata workarounds for PCI-X.
32 * --> Complete a full errata audit for all chipsets to identify others.
34 * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
36 * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
38 * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
40 * --> Develop a low-power-consumption strategy, and implement it.
42 * --> [Experiment, low priority] Investigate interrupt coalescing.
43 * Quite often, especially with PCI Message Signalled Interrupts (MSI),
44 * the overhead reduced by interrupt mitigation is quite often not
45 * worth the latency cost.
47 * --> [Experiment, Marvell value added] Is it possible to use target
48 * mode to cross-connect two Linux boxes with Marvell cards? If so,
49 * creating LibATA target mode support would be very interesting.
51 * Target mode, for those without docs, is the ability to directly
52 * connect two SATA ports.
55 #include <linux/kernel.h>
56 #include <linux/module.h>
57 #include <linux/pci.h>
58 #include <linux/init.h>
59 #include <linux/blkdev.h>
60 #include <linux/delay.h>
61 #include <linux/interrupt.h>
62 #include <linux/dmapool.h>
63 #include <linux/dma-mapping.h>
64 #include <linux/device.h>
65 #include <linux/platform_device.h>
66 #include <linux/ata_platform.h>
67 #include <linux/mbus.h>
68 #include <linux/bitops.h>
69 #include <scsi/scsi_host.h>
70 #include <scsi/scsi_cmnd.h>
71 #include <scsi/scsi_device.h>
72 #include <linux/libata.h>
74 #define DRV_NAME "sata_mv"
75 #define DRV_VERSION "1.24"
78 /* BAR's are enumerated in terms of pci_resource_start() terms */
79 MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */
80 MV_IO_BAR = 2, /* offset 0x18: IO space */
81 MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
83 MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */
84 MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */
87 MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
88 MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08),
89 MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88),
90 MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c),
91 MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc),
92 MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
94 MV_SATAHC0_REG_BASE = 0x20000,
95 MV_FLASH_CTL_OFS = 0x1046c,
96 MV_GPIO_PORT_CTL_OFS = 0x104f0,
97 MV_RESET_CFG_OFS = 0x180d8,
99 MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
100 MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
101 MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
102 MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
105 MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
107 /* CRQB needs alignment on a 1KB boundary. Size == 1KB
108 * CRPB needs alignment on a 256B boundary. Size == 256B
109 * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
111 MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
112 MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
114 MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
116 /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
117 MV_PORT_HC_SHIFT = 2,
118 MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */
119 /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
120 MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */
123 MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
124 MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
126 MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
127 ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
128 ATA_FLAG_PIO_POLLING,
130 MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
132 MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
133 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
134 ATA_FLAG_NCQ | ATA_FLAG_AN,
136 CRQB_FLAG_READ = (1 << 0),
138 CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
139 CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
140 CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
141 CRQB_CMD_ADDR_SHIFT = 8,
142 CRQB_CMD_CS = (0x2 << 11),
143 CRQB_CMD_LAST = (1 << 15),
145 CRPB_FLAG_STATUS_SHIFT = 8,
146 CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
147 CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
149 EPRD_FLAG_END_OF_TBL = (1 << 31),
151 /* PCI interface registers */
153 PCI_COMMAND_OFS = 0xc00,
154 PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
156 PCI_MAIN_CMD_STS_OFS = 0xd30,
157 STOP_PCI_MASTER = (1 << 2),
158 PCI_MASTER_EMPTY = (1 << 3),
159 GLOB_SFT_RST = (1 << 4),
161 MV_PCI_MODE_OFS = 0xd00,
162 MV_PCI_MODE_MASK = 0x30,
164 MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
165 MV_PCI_DISC_TIMER = 0xd04,
166 MV_PCI_MSI_TRIGGER = 0xc38,
167 MV_PCI_SERR_MASK = 0xc28,
168 MV_PCI_XBAR_TMOUT_OFS = 0x1d04,
169 MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
170 MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
171 MV_PCI_ERR_ATTRIBUTE = 0x1d48,
172 MV_PCI_ERR_COMMAND = 0x1d50,
174 PCI_IRQ_CAUSE_OFS = 0x1d58,
175 PCI_IRQ_MASK_OFS = 0x1d5c,
176 PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
178 PCIE_IRQ_CAUSE_OFS = 0x1900,
179 PCIE_IRQ_MASK_OFS = 0x1910,
180 PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
182 /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
183 PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
184 PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64,
185 SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
186 SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024,
187 ERR_IRQ = (1 << 0), /* shift by port # */
188 DONE_IRQ = (1 << 1), /* shift by port # */
189 HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
190 HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
192 TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */
193 TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */
194 PORTS_0_3_COAL_DONE = (1 << 8),
195 PORTS_4_7_COAL_DONE = (1 << 17),
196 PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */
197 GPIO_INT = (1 << 22),
198 SELF_INT = (1 << 23),
199 TWSI_INT = (1 << 24),
200 HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
201 HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
202 HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
204 /* SATAHC registers */
207 HC_IRQ_CAUSE_OFS = 0x14,
208 DMA_IRQ = (1 << 0), /* shift by port # */
209 HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
210 DEV_IRQ = (1 << 8), /* shift by port # */
212 /* Shadow block registers */
214 SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
217 SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
218 SATA_ACTIVE_OFS = 0x350,
219 SATA_FIS_IRQ_CAUSE_OFS = 0x364,
220 SATA_FIS_IRQ_AN = (1 << 9), /* async notification */
223 LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
227 PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
228 PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
229 PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
230 PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
233 SATA_IFCTL_OFS = 0x344,
234 SATA_TESTCTL_OFS = 0x348,
235 SATA_IFSTAT_OFS = 0x34c,
236 VENDOR_UNIQUE_FIS_OFS = 0x35c,
239 FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
240 FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
243 MV5_LTMODE_OFS = 0x30,
244 MV5_PHY_CTL_OFS = 0x0C,
245 SATA_INTERFACE_CFG_OFS = 0x050,
247 MV_M2_PREAMP_MASK = 0x7e0,
251 EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
252 EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
253 EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
254 EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
255 EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
256 EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
257 EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
259 EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
260 EDMA_ERR_IRQ_MASK_OFS = 0xc,
261 EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */
262 EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */
263 EDMA_ERR_DEV = (1 << 2), /* device error */
264 EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */
265 EDMA_ERR_DEV_CON = (1 << 4), /* device connected */
266 EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */
267 EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
268 EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
269 EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */
270 EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
271 EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */
272 EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
273 EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
274 EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
276 EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
277 EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
278 EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
279 EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
280 EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
282 EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
284 EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
285 EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
286 EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
287 EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
288 EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
289 EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
291 EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
293 EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
294 EDMA_ERR_OVERRUN_5 = (1 << 5),
295 EDMA_ERR_UNDERRUN_5 = (1 << 6),
297 EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
298 EDMA_ERR_LNK_CTRL_RX_1 |
299 EDMA_ERR_LNK_CTRL_RX_3 |
300 EDMA_ERR_LNK_CTRL_TX,
302 EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
312 EDMA_ERR_LNK_CTRL_RX_2 |
313 EDMA_ERR_LNK_DATA_RX |
314 EDMA_ERR_LNK_DATA_TX |
315 EDMA_ERR_TRANS_PROTO,
317 EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
322 EDMA_ERR_UNDERRUN_5 |
323 EDMA_ERR_SELF_DIS_5 |
329 EDMA_REQ_Q_BASE_HI_OFS = 0x10,
330 EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
332 EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
333 EDMA_REQ_Q_PTR_SHIFT = 5,
335 EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
336 EDMA_RSP_Q_IN_PTR_OFS = 0x20,
337 EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
338 EDMA_RSP_Q_PTR_SHIFT = 3,
340 EDMA_CMD_OFS = 0x28, /* EDMA command register */
341 EDMA_EN = (1 << 0), /* enable EDMA */
342 EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
343 EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
345 EDMA_STATUS_OFS = 0x30, /* EDMA engine status */
346 EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
347 EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
349 EDMA_IORDY_TMOUT_OFS = 0x34,
350 EDMA_ARB_CFG_OFS = 0x38,
352 EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
354 GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
356 /* Host private flags (hp_flags) */
357 MV_HP_FLAG_MSI = (1 << 0),
358 MV_HP_ERRATA_50XXB0 = (1 << 1),
359 MV_HP_ERRATA_50XXB2 = (1 << 2),
360 MV_HP_ERRATA_60X1B2 = (1 << 3),
361 MV_HP_ERRATA_60X1C0 = (1 << 4),
362 MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
363 MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
364 MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
365 MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
366 MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
367 MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
369 /* Port private flags (pp_flags) */
370 MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
371 MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
372 MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
373 MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
376 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
377 #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
378 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
379 #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
380 #define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
382 #define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
383 #define WINDOW_BASE(i) (0x20034 + ((i) << 4))
386 /* DMA boundary 0xffff is required by the s/g splitting
387 * we need on /length/ in mv_fill-sg().
389 MV_DMA_BOUNDARY = 0xffffU,
391 /* mask of register bits containing lower 32 bits
392 * of EDMA request queue DMA address
394 EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
396 /* ditto, for response queue */
397 EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
411 /* Command ReQuest Block: 32B */
427 /* Command ResPonse Block: 8B */
434 /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
442 struct mv_port_priv {
443 struct mv_crqb *crqb;
445 struct mv_crpb *crpb;
447 struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
448 dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
450 unsigned int req_idx;
451 unsigned int resp_idx;
454 unsigned int delayed_eh_pmp_map;
457 struct mv_port_signal {
462 struct mv_host_priv {
465 struct mv_port_signal signal[8];
466 const struct mv_hw_ops *ops;
469 void __iomem *main_irq_cause_addr;
470 void __iomem *main_irq_mask_addr;
475 * These consistent DMA memory pools give us guaranteed
476 * alignment for hardware-accessed data structures,
477 * and less memory waste in accomplishing the alignment.
479 struct dma_pool *crqb_pool;
480 struct dma_pool *crpb_pool;
481 struct dma_pool *sg_tbl_pool;
485 void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
487 void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
488 void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
490 int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
492 void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
493 void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
496 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
497 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
498 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
499 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
500 static int mv_port_start(struct ata_port *ap);
501 static void mv_port_stop(struct ata_port *ap);
502 static int mv_qc_defer(struct ata_queued_cmd *qc);
503 static void mv_qc_prep(struct ata_queued_cmd *qc);
504 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
505 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
506 static int mv_hardreset(struct ata_link *link, unsigned int *class,
507 unsigned long deadline);
508 static void mv_eh_freeze(struct ata_port *ap);
509 static void mv_eh_thaw(struct ata_port *ap);
510 static void mv6_dev_config(struct ata_device *dev);
512 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
514 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
515 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
517 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
519 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
520 static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
522 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
524 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
525 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
527 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
529 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
530 static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
532 static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
534 static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
535 void __iomem *mmio, unsigned int n_hc);
536 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
538 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
539 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
540 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
541 unsigned int port_no);
542 static int mv_stop_edma(struct ata_port *ap);
543 static int mv_stop_edma_engine(void __iomem *port_mmio);
544 static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
546 static void mv_pmp_select(struct ata_port *ap, int pmp);
547 static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
548 unsigned long deadline);
549 static int mv_softreset(struct ata_link *link, unsigned int *class,
550 unsigned long deadline);
551 static void mv_pmp_error_handler(struct ata_port *ap);
552 static void mv_process_crpb_entries(struct ata_port *ap,
553 struct mv_port_priv *pp);
555 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
556 * because we have to allow room for worst case splitting of
557 * PRDs for 64K boundaries in mv_fill_sg().
559 static struct scsi_host_template mv5_sht = {
560 ATA_BASE_SHT(DRV_NAME),
561 .sg_tablesize = MV_MAX_SG_CT / 2,
562 .dma_boundary = MV_DMA_BOUNDARY,
565 static struct scsi_host_template mv6_sht = {
566 ATA_NCQ_SHT(DRV_NAME),
567 .can_queue = MV_MAX_Q_DEPTH - 1,
568 .sg_tablesize = MV_MAX_SG_CT / 2,
569 .dma_boundary = MV_DMA_BOUNDARY,
572 static struct ata_port_operations mv5_ops = {
573 .inherits = &ata_sff_port_ops,
575 .qc_defer = mv_qc_defer,
576 .qc_prep = mv_qc_prep,
577 .qc_issue = mv_qc_issue,
579 .freeze = mv_eh_freeze,
581 .hardreset = mv_hardreset,
582 .error_handler = ata_std_error_handler, /* avoid SFF EH */
583 .post_internal_cmd = ATA_OP_NULL,
585 .scr_read = mv5_scr_read,
586 .scr_write = mv5_scr_write,
588 .port_start = mv_port_start,
589 .port_stop = mv_port_stop,
592 static struct ata_port_operations mv6_ops = {
593 .inherits = &mv5_ops,
594 .dev_config = mv6_dev_config,
595 .scr_read = mv_scr_read,
596 .scr_write = mv_scr_write,
598 .pmp_hardreset = mv_pmp_hardreset,
599 .pmp_softreset = mv_softreset,
600 .softreset = mv_softreset,
601 .error_handler = mv_pmp_error_handler,
604 static struct ata_port_operations mv_iie_ops = {
605 .inherits = &mv6_ops,
606 .dev_config = ATA_OP_NULL,
607 .qc_prep = mv_qc_prep_iie,
610 static const struct ata_port_info mv_port_info[] = {
612 .flags = MV_COMMON_FLAGS,
613 .pio_mask = 0x1f, /* pio0-4 */
614 .udma_mask = ATA_UDMA6,
615 .port_ops = &mv5_ops,
618 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
619 .pio_mask = 0x1f, /* pio0-4 */
620 .udma_mask = ATA_UDMA6,
621 .port_ops = &mv5_ops,
624 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
625 .pio_mask = 0x1f, /* pio0-4 */
626 .udma_mask = ATA_UDMA6,
627 .port_ops = &mv5_ops,
630 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
631 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
633 .pio_mask = 0x1f, /* pio0-4 */
634 .udma_mask = ATA_UDMA6,
635 .port_ops = &mv6_ops,
638 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
639 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
640 ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
641 .pio_mask = 0x1f, /* pio0-4 */
642 .udma_mask = ATA_UDMA6,
643 .port_ops = &mv6_ops,
646 .flags = MV_GENIIE_FLAGS,
647 .pio_mask = 0x1f, /* pio0-4 */
648 .udma_mask = ATA_UDMA6,
649 .port_ops = &mv_iie_ops,
652 .flags = MV_GENIIE_FLAGS,
653 .pio_mask = 0x1f, /* pio0-4 */
654 .udma_mask = ATA_UDMA6,
655 .port_ops = &mv_iie_ops,
658 .flags = MV_GENIIE_FLAGS,
659 .pio_mask = 0x1f, /* pio0-4 */
660 .udma_mask = ATA_UDMA6,
661 .port_ops = &mv_iie_ops,
665 static const struct pci_device_id mv_pci_tbl[] = {
666 { PCI_VDEVICE(MARVELL, 0x5040), chip_504x },
667 { PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
668 { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
669 { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
670 /* RocketRAID 1720/174x have different identifiers */
671 { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
672 { PCI_VDEVICE(TTI, 0x1740), chip_508x },
673 { PCI_VDEVICE(TTI, 0x1742), chip_508x },
675 { PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
676 { PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
677 { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 },
678 { PCI_VDEVICE(MARVELL, 0x6080), chip_608x },
679 { PCI_VDEVICE(MARVELL, 0x6081), chip_608x },
681 { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
684 { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
686 /* Marvell 7042 support */
687 { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
689 /* Highpoint RocketRAID PCIe series */
690 { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
691 { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
693 { } /* terminate list */
696 static const struct mv_hw_ops mv5xxx_ops = {
697 .phy_errata = mv5_phy_errata,
698 .enable_leds = mv5_enable_leds,
699 .read_preamp = mv5_read_preamp,
700 .reset_hc = mv5_reset_hc,
701 .reset_flash = mv5_reset_flash,
702 .reset_bus = mv5_reset_bus,
705 static const struct mv_hw_ops mv6xxx_ops = {
706 .phy_errata = mv6_phy_errata,
707 .enable_leds = mv6_enable_leds,
708 .read_preamp = mv6_read_preamp,
709 .reset_hc = mv6_reset_hc,
710 .reset_flash = mv6_reset_flash,
711 .reset_bus = mv_reset_pci_bus,
714 static const struct mv_hw_ops mv_soc_ops = {
715 .phy_errata = mv6_phy_errata,
716 .enable_leds = mv_soc_enable_leds,
717 .read_preamp = mv_soc_read_preamp,
718 .reset_hc = mv_soc_reset_hc,
719 .reset_flash = mv_soc_reset_flash,
720 .reset_bus = mv_soc_reset_bus,
727 static inline void writelfl(unsigned long data, void __iomem *addr)
730 (void) readl(addr); /* flush to avoid PCI posted write */
733 static inline unsigned int mv_hc_from_port(unsigned int port)
735 return port >> MV_PORT_HC_SHIFT;
738 static inline unsigned int mv_hardport_from_port(unsigned int port)
740 return port & MV_PORT_MASK;
744 * Consolidate some rather tricky bit shift calculations.
745 * This is hot-path stuff, so not a function.
746 * Simple code, with two return values, so macro rather than inline.
748 * port is the sole input, in range 0..7.
749 * shift is one output, for use with main_irq_cause / main_irq_mask registers.
750 * hardport is the other output, in range 0..3.
752 * Note that port and hardport may be the same variable in some cases.
754 #define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
756 shift = mv_hc_from_port(port) * HC_SHIFT; \
757 hardport = mv_hardport_from_port(port); \
758 shift += hardport * 2; \
761 static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
763 return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
766 static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
769 return mv_hc_base(base, mv_hc_from_port(port));
772 static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
774 return mv_hc_base_from_port(base, port) +
775 MV_SATAHC_ARBTR_REG_SZ +
776 (mv_hardport_from_port(port) * MV_PORT_REG_SZ);
779 static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
781 void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
782 unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
784 return hc_mmio + ofs;
787 static inline void __iomem *mv_host_base(struct ata_host *host)
789 struct mv_host_priv *hpriv = host->private_data;
793 static inline void __iomem *mv_ap_base(struct ata_port *ap)
795 return mv_port_base(mv_host_base(ap->host), ap->port_no);
798 static inline int mv_get_hc_count(unsigned long port_flags)
800 return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
803 static void mv_set_edma_ptrs(void __iomem *port_mmio,
804 struct mv_host_priv *hpriv,
805 struct mv_port_priv *pp)
810 * initialize request queue
812 pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
813 index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
815 WARN_ON(pp->crqb_dma & 0x3ff);
816 writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
817 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
818 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
819 writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
822 * initialize response queue
824 pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
825 index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
827 WARN_ON(pp->crpb_dma & 0xff);
828 writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
829 writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
830 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
831 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
834 static void mv_set_main_irq_mask(struct ata_host *host,
835 u32 disable_bits, u32 enable_bits)
837 struct mv_host_priv *hpriv = host->private_data;
838 u32 old_mask, new_mask;
840 old_mask = hpriv->main_irq_mask;
841 new_mask = (old_mask & ~disable_bits) | enable_bits;
842 if (new_mask != old_mask) {
843 hpriv->main_irq_mask = new_mask;
844 writelfl(new_mask, hpriv->main_irq_mask_addr);
848 static void mv_enable_port_irqs(struct ata_port *ap,
849 unsigned int port_bits)
851 unsigned int shift, hardport, port = ap->port_no;
852 u32 disable_bits, enable_bits;
854 MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
856 disable_bits = (DONE_IRQ | ERR_IRQ) << shift;
857 enable_bits = port_bits << shift;
858 mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
862 * mv_start_dma - Enable eDMA engine
863 * @base: port base address
864 * @pp: port private data
866 * Verify the local cache of the eDMA state is accurate with a
870 * Inherited from caller.
872 static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
873 struct mv_port_priv *pp, u8 protocol)
875 int want_ncq = (protocol == ATA_PROT_NCQ);
877 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
878 int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
879 if (want_ncq != using_ncq)
882 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
883 struct mv_host_priv *hpriv = ap->host->private_data;
884 int hardport = mv_hardport_from_port(ap->port_no);
885 void __iomem *hc_mmio = mv_hc_base_from_port(
886 mv_host_base(ap->host), hardport);
887 u32 hc_irq_cause, ipending;
889 /* clear EDMA event indicators, if any */
890 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
892 /* clear EDMA interrupt indicator, if any */
893 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
894 ipending = (DEV_IRQ | DMA_IRQ) << hardport;
895 if (hc_irq_cause & ipending) {
896 writelfl(hc_irq_cause & ~ipending,
897 hc_mmio + HC_IRQ_CAUSE_OFS);
900 mv_edma_cfg(ap, want_ncq);
902 /* clear FIS IRQ Cause */
903 if (IS_GEN_IIE(hpriv))
904 writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
906 mv_set_edma_ptrs(port_mmio, hpriv, pp);
907 mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ);
909 writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
910 pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
914 static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
916 void __iomem *port_mmio = mv_ap_base(ap);
917 const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE);
918 const int per_loop = 5, timeout = (15 * 1000 / per_loop);
922 * Wait for the EDMA engine to finish transactions in progress.
923 * No idea what a good "timeout" value might be, but measurements
924 * indicate that it often requires hundreds of microseconds
925 * with two drives in-use. So we use the 15msec value above
926 * as a rough guess at what even more drives might require.
928 for (i = 0; i < timeout; ++i) {
929 u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
930 if ((edma_stat & empty_idle) == empty_idle)
934 /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
938 * mv_stop_edma_engine - Disable eDMA engine
939 * @port_mmio: io base address
942 * Inherited from caller.
944 static int mv_stop_edma_engine(void __iomem *port_mmio)
948 /* Disable eDMA. The disable bit auto clears. */
949 writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
951 /* Wait for the chip to confirm eDMA is off. */
952 for (i = 10000; i > 0; i--) {
953 u32 reg = readl(port_mmio + EDMA_CMD_OFS);
954 if (!(reg & EDMA_EN))
961 static int mv_stop_edma(struct ata_port *ap)
963 void __iomem *port_mmio = mv_ap_base(ap);
964 struct mv_port_priv *pp = ap->private_data;
966 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
968 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
969 mv_wait_for_edma_empty_idle(ap);
970 if (mv_stop_edma_engine(port_mmio)) {
971 ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
978 static void mv_dump_mem(void __iomem *start, unsigned bytes)
981 for (b = 0; b < bytes; ) {
982 DPRINTK("%p: ", start + b);
983 for (w = 0; b < bytes && w < 4; w++) {
984 printk("%08x ", readl(start + b));
992 static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
997 for (b = 0; b < bytes; ) {
998 DPRINTK("%02x: ", b);
999 for (w = 0; b < bytes && w < 4; w++) {
1000 (void) pci_read_config_dword(pdev, b, &dw);
1001 printk("%08x ", dw);
1008 static void mv_dump_all_regs(void __iomem *mmio_base, int port,
1009 struct pci_dev *pdev)
1012 void __iomem *hc_base = mv_hc_base(mmio_base,
1013 port >> MV_PORT_HC_SHIFT);
1014 void __iomem *port_base;
1015 int start_port, num_ports, p, start_hc, num_hcs, hc;
1018 start_hc = start_port = 0;
1019 num_ports = 8; /* shld be benign for 4 port devs */
1022 start_hc = port >> MV_PORT_HC_SHIFT;
1024 num_ports = num_hcs = 1;
1026 DPRINTK("All registers for port(s) %u-%u:\n", start_port,
1027 num_ports > 1 ? num_ports - 1 : start_port);
1030 DPRINTK("PCI config space regs:\n");
1031 mv_dump_pci_cfg(pdev, 0x68);
1033 DPRINTK("PCI regs:\n");
1034 mv_dump_mem(mmio_base+0xc00, 0x3c);
1035 mv_dump_mem(mmio_base+0xd00, 0x34);
1036 mv_dump_mem(mmio_base+0xf00, 0x4);
1037 mv_dump_mem(mmio_base+0x1d00, 0x6c);
1038 for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
1039 hc_base = mv_hc_base(mmio_base, hc);
1040 DPRINTK("HC regs (HC %i):\n", hc);
1041 mv_dump_mem(hc_base, 0x1c);
1043 for (p = start_port; p < start_port + num_ports; p++) {
1044 port_base = mv_port_base(mmio_base, p);
1045 DPRINTK("EDMA regs (port %i):\n", p);
1046 mv_dump_mem(port_base, 0x54);
1047 DPRINTK("SATA regs (port %i):\n", p);
1048 mv_dump_mem(port_base+0x300, 0x60);
1053 static unsigned int mv_scr_offset(unsigned int sc_reg_in)
1057 switch (sc_reg_in) {
1061 ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32));
1064 ofs = SATA_ACTIVE_OFS; /* active is not with the others */
1073 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
1075 unsigned int ofs = mv_scr_offset(sc_reg_in);
1077 if (ofs != 0xffffffffU) {
1078 *val = readl(mv_ap_base(ap) + ofs);
1084 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
1086 unsigned int ofs = mv_scr_offset(sc_reg_in);
1088 if (ofs != 0xffffffffU) {
1089 writelfl(val, mv_ap_base(ap) + ofs);
1095 static void mv6_dev_config(struct ata_device *adev)
1098 * Deal with Gen-II ("mv6") hardware quirks/restrictions:
1100 * Gen-II does not support NCQ over a port multiplier
1101 * (no FIS-based switching).
1103 * We don't have hob_nsect when doing NCQ commands on Gen-II.
1104 * See mv_qc_prep() for more info.
1106 if (adev->flags & ATA_DFLAG_NCQ) {
1107 if (sata_pmp_attached(adev->link->ap)) {
1108 adev->flags &= ~ATA_DFLAG_NCQ;
1109 ata_dev_printk(adev, KERN_INFO,
1110 "NCQ disabled for command-based switching\n");
1111 } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
1112 adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
1113 ata_dev_printk(adev, KERN_INFO,
1114 "max_sectors limited to %u for NCQ\n",
1120 static int mv_qc_defer(struct ata_queued_cmd *qc)
1122 struct ata_link *link = qc->dev->link;
1123 struct ata_port *ap = link->ap;
1124 struct mv_port_priv *pp = ap->private_data;
1127 * Don't allow new commands if we're in a delayed EH state
1128 * for NCQ and/or FIS-based switching.
1130 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
1131 return ATA_DEFER_PORT;
1133 * If the port is completely idle, then allow the new qc.
1135 if (ap->nr_active_links == 0)
1139 * The port is operating in host queuing mode (EDMA) with NCQ
1140 * enabled, allow multiple NCQ commands. EDMA also allows
1141 * queueing multiple DMA commands but libata core currently
1144 if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
1145 (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
1148 return ATA_DEFER_PORT;
1151 static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
1153 u32 new_fiscfg, old_fiscfg;
1154 u32 new_ltmode, old_ltmode;
1155 u32 new_haltcond, old_haltcond;
1157 old_fiscfg = readl(port_mmio + FISCFG_OFS);
1158 old_ltmode = readl(port_mmio + LTMODE_OFS);
1159 old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
1161 new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
1162 new_ltmode = old_ltmode & ~LTMODE_BIT8;
1163 new_haltcond = old_haltcond | EDMA_ERR_DEV;
1166 new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
1167 new_ltmode = old_ltmode | LTMODE_BIT8;
1169 new_haltcond &= ~EDMA_ERR_DEV;
1171 new_fiscfg |= FISCFG_WAIT_DEV_ERR;
1174 if (new_fiscfg != old_fiscfg)
1175 writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
1176 if (new_ltmode != old_ltmode)
1177 writelfl(new_ltmode, port_mmio + LTMODE_OFS);
1178 if (new_haltcond != old_haltcond)
1179 writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
1182 static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
1184 struct mv_host_priv *hpriv = ap->host->private_data;
1187 /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
1188 old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
1190 new = old | (1 << 22);
1192 new = old & ~(1 << 22);
1194 writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
1197 static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
1200 struct mv_port_priv *pp = ap->private_data;
1201 struct mv_host_priv *hpriv = ap->host->private_data;
1202 void __iomem *port_mmio = mv_ap_base(ap);
1204 /* set up non-NCQ EDMA configuration */
1205 cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
1206 pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
1208 if (IS_GEN_I(hpriv))
1209 cfg |= (1 << 8); /* enab config burst size mask */
1211 else if (IS_GEN_II(hpriv)) {
1212 cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
1213 mv_60x1_errata_sata25(ap, want_ncq);
1215 } else if (IS_GEN_IIE(hpriv)) {
1216 int want_fbs = sata_pmp_attached(ap);
1218 * Possible future enhancement:
1220 * The chip can use FBS with non-NCQ, if we allow it,
1221 * But first we need to have the error handling in place
1222 * for this mode (datasheet section 7.3.15.4.2.3).
1223 * So disallow non-NCQ FBS for now.
1225 want_fbs &= want_ncq;
1227 mv_config_fbs(port_mmio, want_ncq, want_fbs);
1230 pp->pp_flags |= MV_PP_FLAG_FBS_EN;
1231 cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
1234 cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
1235 cfg |= (1 << 22); /* enab 4-entry host queue cache */
1237 cfg |= (1 << 18); /* enab early completion */
1238 if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
1239 cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
1243 cfg |= EDMA_CFG_NCQ;
1244 pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
1246 pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
1248 writelfl(cfg, port_mmio + EDMA_CFG_OFS);
1251 static void mv_port_free_dma_mem(struct ata_port *ap)
1253 struct mv_host_priv *hpriv = ap->host->private_data;
1254 struct mv_port_priv *pp = ap->private_data;
1258 dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
1262 dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
1266 * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
1267 * For later hardware, we have one unique sg_tbl per NCQ tag.
1269 for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
1270 if (pp->sg_tbl[tag]) {
1271 if (tag == 0 || !IS_GEN_I(hpriv))
1272 dma_pool_free(hpriv->sg_tbl_pool,
1274 pp->sg_tbl_dma[tag]);
1275 pp->sg_tbl[tag] = NULL;
1281 * mv_port_start - Port specific init/start routine.
1282 * @ap: ATA channel to manipulate
1284 * Allocate and point to DMA memory, init port private memory,
1288 * Inherited from caller.
1290 static int mv_port_start(struct ata_port *ap)
1292 struct device *dev = ap->host->dev;
1293 struct mv_host_priv *hpriv = ap->host->private_data;
1294 struct mv_port_priv *pp;
1297 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1300 ap->private_data = pp;
1302 pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
1305 memset(pp->crqb, 0, MV_CRQB_Q_SZ);
1307 pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
1309 goto out_port_free_dma_mem;
1310 memset(pp->crpb, 0, MV_CRPB_Q_SZ);
1312 /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
1313 if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
1314 ap->flags |= ATA_FLAG_AN;
1316 * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
1317 * For later hardware, we need one unique sg_tbl per NCQ tag.
1319 for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
1320 if (tag == 0 || !IS_GEN_I(hpriv)) {
1321 pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
1322 GFP_KERNEL, &pp->sg_tbl_dma[tag]);
1323 if (!pp->sg_tbl[tag])
1324 goto out_port_free_dma_mem;
1326 pp->sg_tbl[tag] = pp->sg_tbl[0];
1327 pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
1332 out_port_free_dma_mem:
1333 mv_port_free_dma_mem(ap);
1338 * mv_port_stop - Port specific cleanup/stop routine.
1339 * @ap: ATA channel to manipulate
1341 * Stop DMA, cleanup port memory.
1344 * This routine uses the host lock to protect the DMA stop.
1346 static void mv_port_stop(struct ata_port *ap)
1349 mv_enable_port_irqs(ap, 0);
1350 mv_port_free_dma_mem(ap);
1354 * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
1355 * @qc: queued command whose SG list to source from
1357 * Populate the SG list and mark the last entry.
1360 * Inherited from caller.
1362 static void mv_fill_sg(struct ata_queued_cmd *qc)
1364 struct mv_port_priv *pp = qc->ap->private_data;
1365 struct scatterlist *sg;
1366 struct mv_sg *mv_sg, *last_sg = NULL;
1369 mv_sg = pp->sg_tbl[qc->tag];
1370 for_each_sg(qc->sg, sg, qc->n_elem, si) {
1371 dma_addr_t addr = sg_dma_address(sg);
1372 u32 sg_len = sg_dma_len(sg);
1375 u32 offset = addr & 0xffff;
1378 if ((offset + sg_len > 0x10000))
1379 len = 0x10000 - offset;
1381 mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
1382 mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
1383 mv_sg->flags_size = cpu_to_le32(len & 0xffff);
1393 if (likely(last_sg))
1394 last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
1397 static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
1399 u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
1400 (last ? CRQB_CMD_LAST : 0);
1401 *cmdw = cpu_to_le16(tmp);
1405 * mv_qc_prep - Host specific command preparation.
1406 * @qc: queued command to prepare
1408 * This routine simply redirects to the general purpose routine
1409 * if command is not DMA. Else, it handles prep of the CRQB
1410 * (command request block), does some sanity checking, and calls
1411 * the SG load routine.
1414 * Inherited from caller.
1416 static void mv_qc_prep(struct ata_queued_cmd *qc)
1418 struct ata_port *ap = qc->ap;
1419 struct mv_port_priv *pp = ap->private_data;
1421 struct ata_taskfile *tf;
1425 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1426 (qc->tf.protocol != ATA_PROT_NCQ))
1429 /* Fill in command request block
1431 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1432 flags |= CRQB_FLAG_READ;
1433 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1434 flags |= qc->tag << CRQB_TAG_SHIFT;
1435 flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
1437 /* get current queue index from software */
1438 in_index = pp->req_idx;
1440 pp->crqb[in_index].sg_addr =
1441 cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
1442 pp->crqb[in_index].sg_addr_hi =
1443 cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
1444 pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
1446 cw = &pp->crqb[in_index].ata_cmd[0];
1449 /* Sadly, the CRQB cannot accomodate all registers--there are
1450 * only 11 bytes...so we must pick and choose required
1451 * registers based on the command. So, we drop feature and
1452 * hob_feature for [RW] DMA commands, but they are needed for
1453 * NCQ. NCQ will drop hob_nsect.
1455 switch (tf->command) {
1457 case ATA_CMD_READ_EXT:
1459 case ATA_CMD_WRITE_EXT:
1460 case ATA_CMD_WRITE_FUA_EXT:
1461 mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
1463 case ATA_CMD_FPDMA_READ:
1464 case ATA_CMD_FPDMA_WRITE:
1465 mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
1466 mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
1469 /* The only other commands EDMA supports in non-queued and
1470 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
1471 * of which are defined/used by Linux. If we get here, this
1472 * driver needs work.
1474 * FIXME: modify libata to give qc_prep a return value and
1475 * return error here.
1477 BUG_ON(tf->command);
1480 mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
1481 mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
1482 mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
1483 mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
1484 mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
1485 mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
1486 mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
1487 mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
1488 mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
1490 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1496 * mv_qc_prep_iie - Host specific command preparation.
1497 * @qc: queued command to prepare
1499 * This routine simply redirects to the general purpose routine
1500 * if command is not DMA. Else, it handles prep of the CRQB
1501 * (command request block), does some sanity checking, and calls
1502 * the SG load routine.
1505 * Inherited from caller.
1507 static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
1509 struct ata_port *ap = qc->ap;
1510 struct mv_port_priv *pp = ap->private_data;
1511 struct mv_crqb_iie *crqb;
1512 struct ata_taskfile *tf;
1516 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1517 (qc->tf.protocol != ATA_PROT_NCQ))
1520 /* Fill in Gen IIE command request block */
1521 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1522 flags |= CRQB_FLAG_READ;
1524 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1525 flags |= qc->tag << CRQB_TAG_SHIFT;
1526 flags |= qc->tag << CRQB_HOSTQ_SHIFT;
1527 flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
1529 /* get current queue index from software */
1530 in_index = pp->req_idx;
1532 crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
1533 crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
1534 crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
1535 crqb->flags = cpu_to_le32(flags);
1538 crqb->ata_cmd[0] = cpu_to_le32(
1539 (tf->command << 16) |
1542 crqb->ata_cmd[1] = cpu_to_le32(
1548 crqb->ata_cmd[2] = cpu_to_le32(
1549 (tf->hob_lbal << 0) |
1550 (tf->hob_lbam << 8) |
1551 (tf->hob_lbah << 16) |
1552 (tf->hob_feature << 24)
1554 crqb->ata_cmd[3] = cpu_to_le32(
1556 (tf->hob_nsect << 8)
1559 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1565 * mv_qc_issue - Initiate a command to the host
1566 * @qc: queued command to start
1568 * This routine simply redirects to the general purpose routine
1569 * if command is not DMA. Else, it sanity checks our local
1570 * caches of the request producer/consumer indices then enables
1571 * DMA and bumps the request producer index.
1574 * Inherited from caller.
1576 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
1578 struct ata_port *ap = qc->ap;
1579 void __iomem *port_mmio = mv_ap_base(ap);
1580 struct mv_port_priv *pp = ap->private_data;
1583 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1584 (qc->tf.protocol != ATA_PROT_NCQ)) {
1585 static int limit_warnings = 10;
1587 * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
1589 * Someday, we might implement special polling workarounds
1590 * for these, but it all seems rather unnecessary since we
1591 * normally use only DMA for commands which transfer more
1592 * than a single block of data.
1594 * Much of the time, this could just work regardless.
1595 * So for now, just log the incident, and allow the attempt.
1597 if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
1599 ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
1600 ": attempting PIO w/multiple DRQ: "
1601 "this may fail due to h/w errata\n");
1604 * We're about to send a non-EDMA capable command to the
1605 * port. Turn off EDMA so there won't be problems accessing
1606 * shadow block, etc registers.
1609 mv_enable_port_irqs(ap, ERR_IRQ);
1610 mv_pmp_select(ap, qc->dev->link->pmp);
1611 return ata_sff_qc_issue(qc);
1614 mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
1616 pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
1617 in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
1619 /* and write the request in pointer to kick the EDMA to life */
1620 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
1621 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
1626 static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
1628 struct mv_port_priv *pp = ap->private_data;
1629 struct ata_queued_cmd *qc;
1631 if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
1633 qc = ata_qc_from_tag(ap, ap->link.active_tag);
1634 if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
1639 static void mv_pmp_error_handler(struct ata_port *ap)
1641 unsigned int pmp, pmp_map;
1642 struct mv_port_priv *pp = ap->private_data;
1644 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
1646 * Perform NCQ error analysis on failed PMPs
1647 * before we freeze the port entirely.
1649 * The failed PMPs are marked earlier by mv_pmp_eh_prep().
1651 pmp_map = pp->delayed_eh_pmp_map;
1652 pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
1653 for (pmp = 0; pmp_map != 0; pmp++) {
1654 unsigned int this_pmp = (1 << pmp);
1655 if (pmp_map & this_pmp) {
1656 struct ata_link *link = &ap->pmp_link[pmp];
1657 pmp_map &= ~this_pmp;
1658 ata_eh_analyze_ncq_error(link);
1661 ata_port_freeze(ap);
1663 sata_pmp_error_handler(ap);
1666 static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
1668 void __iomem *port_mmio = mv_ap_base(ap);
1670 return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
1673 static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
1675 struct ata_eh_info *ehi;
1679 * Initialize EH info for PMPs which saw device errors
1681 ehi = &ap->link.eh_info;
1682 for (pmp = 0; pmp_map != 0; pmp++) {
1683 unsigned int this_pmp = (1 << pmp);
1684 if (pmp_map & this_pmp) {
1685 struct ata_link *link = &ap->pmp_link[pmp];
1687 pmp_map &= ~this_pmp;
1688 ehi = &link->eh_info;
1689 ata_ehi_clear_desc(ehi);
1690 ata_ehi_push_desc(ehi, "dev err");
1691 ehi->err_mask |= AC_ERR_DEV;
1692 ehi->action |= ATA_EH_RESET;
1693 ata_link_abort(link);
1698 static int mv_req_q_empty(struct ata_port *ap)
1700 void __iomem *port_mmio = mv_ap_base(ap);
1701 u32 in_ptr, out_ptr;
1703 in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS)
1704 >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
1705 out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
1706 >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
1707 return (in_ptr == out_ptr); /* 1 == queue_is_empty */
1710 static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
1712 struct mv_port_priv *pp = ap->private_data;
1714 unsigned int old_map, new_map;
1717 * Device error during FBS+NCQ operation:
1719 * Set a port flag to prevent further I/O being enqueued.
1720 * Leave the EDMA running to drain outstanding commands from this port.
1721 * Perform the post-mortem/EH only when all responses are complete.
1722 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
1724 if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) {
1725 pp->pp_flags |= MV_PP_FLAG_DELAYED_EH;
1726 pp->delayed_eh_pmp_map = 0;
1728 old_map = pp->delayed_eh_pmp_map;
1729 new_map = old_map | mv_get_err_pmp_map(ap);
1731 if (old_map != new_map) {
1732 pp->delayed_eh_pmp_map = new_map;
1733 mv_pmp_eh_prep(ap, new_map & ~old_map);
1735 failed_links = hweight16(new_map);
1737 ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
1738 "failed_links=%d nr_active_links=%d\n",
1739 __func__, pp->delayed_eh_pmp_map,
1740 ap->qc_active, failed_links,
1741 ap->nr_active_links);
1743 if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
1744 mv_process_crpb_entries(ap, pp);
1747 ata_port_printk(ap, KERN_INFO, "%s: done\n", __func__);
1748 return 1; /* handled */
1750 ata_port_printk(ap, KERN_INFO, "%s: waiting\n", __func__);
1751 return 1; /* handled */
1754 static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap)
1757 * Possible future enhancement:
1759 * FBS+non-NCQ operation is not yet implemented.
1760 * See related notes in mv_edma_cfg().
1762 * Device error during FBS+non-NCQ operation:
1764 * We need to snapshot the shadow registers for each failed command.
1765 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
1767 return 0; /* not handled */
1770 static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause)
1772 struct mv_port_priv *pp = ap->private_data;
1774 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
1775 return 0; /* EDMA was not active: not handled */
1776 if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN))
1777 return 0; /* FBS was not active: not handled */
1779 if (!(edma_err_cause & EDMA_ERR_DEV))
1780 return 0; /* non DEV error: not handled */
1781 edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT;
1782 if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS))
1783 return 0; /* other problems: not handled */
1785 if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
1787 * EDMA should NOT have self-disabled for this case.
1788 * If it did, then something is wrong elsewhere,
1789 * and we cannot handle it here.
1791 if (edma_err_cause & EDMA_ERR_SELF_DIS) {
1792 ata_port_printk(ap, KERN_WARNING,
1793 "%s: err_cause=0x%x pp_flags=0x%x\n",
1794 __func__, edma_err_cause, pp->pp_flags);
1795 return 0; /* not handled */
1797 return mv_handle_fbs_ncq_dev_err(ap);
1800 * EDMA should have self-disabled for this case.
1801 * If it did not, then something is wrong elsewhere,
1802 * and we cannot handle it here.
1804 if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
1805 ata_port_printk(ap, KERN_WARNING,
1806 "%s: err_cause=0x%x pp_flags=0x%x\n",
1807 __func__, edma_err_cause, pp->pp_flags);
1808 return 0; /* not handled */
1810 return mv_handle_fbs_non_ncq_dev_err(ap);
1812 return 0; /* not handled */
1815 static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
1817 struct ata_eh_info *ehi = &ap->link.eh_info;
1818 char *when = "idle";
1820 ata_ehi_clear_desc(ehi);
1821 if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
1823 } else if (edma_was_enabled) {
1824 when = "EDMA enabled";
1826 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
1827 if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
1830 ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when);
1831 ehi->err_mask |= AC_ERR_OTHER;
1832 ehi->action |= ATA_EH_RESET;
1833 ata_port_freeze(ap);
1837 * mv_err_intr - Handle error interrupts on the port
1838 * @ap: ATA channel to manipulate
1839 * @qc: affected command (non-NCQ), or NULL
1841 * Most cases require a full reset of the chip's state machine,
1842 * which also performs a COMRESET.
1843 * Also, if the port disabled DMA, update our cached copy to match.
1846 * Inherited from caller.
1848 static void mv_err_intr(struct ata_port *ap)
1850 void __iomem *port_mmio = mv_ap_base(ap);
1851 u32 edma_err_cause, eh_freeze_mask, serr = 0;
1853 struct mv_port_priv *pp = ap->private_data;
1854 struct mv_host_priv *hpriv = ap->host->private_data;
1855 unsigned int action = 0, err_mask = 0;
1856 struct ata_eh_info *ehi = &ap->link.eh_info;
1857 struct ata_queued_cmd *qc;
1861 * Read and clear the SError and err_cause bits.
1862 * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
1863 * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
1865 sata_scr_read(&ap->link, SCR_ERROR, &serr);
1866 sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
1868 edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1869 if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
1870 fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
1871 writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
1873 writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1875 if (edma_err_cause & EDMA_ERR_DEV) {
1877 * Device errors during FIS-based switching operation
1878 * require special handling.
1880 if (mv_handle_dev_err(ap, edma_err_cause))
1884 qc = mv_get_active_qc(ap);
1885 ata_ehi_clear_desc(ehi);
1886 ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
1887 edma_err_cause, pp->pp_flags);
1889 if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
1890 ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
1891 if (fis_cause & SATA_FIS_IRQ_AN) {
1892 u32 ec = edma_err_cause &
1893 ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
1894 sata_async_notification(ap);
1896 return; /* Just an AN; no need for the nukes */
1897 ata_ehi_push_desc(ehi, "SDB notify");
1901 * All generations share these EDMA error cause bits:
1903 if (edma_err_cause & EDMA_ERR_DEV) {
1904 err_mask |= AC_ERR_DEV;
1905 action |= ATA_EH_RESET;
1906 ata_ehi_push_desc(ehi, "dev error");
1908 if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
1909 EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
1910 EDMA_ERR_INTRL_PAR)) {
1911 err_mask |= AC_ERR_ATA_BUS;
1912 action |= ATA_EH_RESET;
1913 ata_ehi_push_desc(ehi, "parity error");
1915 if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
1916 ata_ehi_hotplugged(ehi);
1917 ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
1918 "dev disconnect" : "dev connect");
1919 action |= ATA_EH_RESET;
1923 * Gen-I has a different SELF_DIS bit,
1924 * different FREEZE bits, and no SERR bit:
1926 if (IS_GEN_I(hpriv)) {
1927 eh_freeze_mask = EDMA_EH_FREEZE_5;
1928 if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
1929 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1930 ata_ehi_push_desc(ehi, "EDMA self-disable");
1933 eh_freeze_mask = EDMA_EH_FREEZE;
1934 if (edma_err_cause & EDMA_ERR_SELF_DIS) {
1935 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1936 ata_ehi_push_desc(ehi, "EDMA self-disable");
1938 if (edma_err_cause & EDMA_ERR_SERR) {
1939 ata_ehi_push_desc(ehi, "SError=%08x", serr);
1940 err_mask |= AC_ERR_ATA_BUS;
1941 action |= ATA_EH_RESET;
1946 err_mask = AC_ERR_OTHER;
1947 action |= ATA_EH_RESET;
1950 ehi->serror |= serr;
1951 ehi->action |= action;
1954 qc->err_mask |= err_mask;
1956 ehi->err_mask |= err_mask;
1958 if (err_mask == AC_ERR_DEV) {
1960 * Cannot do ata_port_freeze() here,
1961 * because it would kill PIO access,
1962 * which is needed for further diagnosis.
1966 } else if (edma_err_cause & eh_freeze_mask) {
1968 * Note to self: ata_port_freeze() calls ata_port_abort()
1970 ata_port_freeze(ap);
1977 ata_link_abort(qc->dev->link);
1983 static void mv_process_crpb_response(struct ata_port *ap,
1984 struct mv_crpb *response, unsigned int tag, int ncq_enabled)
1986 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
1990 u16 edma_status = le16_to_cpu(response->flags);
1992 * edma_status from a response queue entry:
1993 * LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only).
1994 * MSB is saved ATA status from command completion.
1997 u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
2000 * Error will be seen/handled by mv_err_intr().
2001 * So do nothing at all here.
2006 ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
2007 if (!ac_err_mask(ata_status))
2008 ata_qc_complete(qc);
2009 /* else: leave it for mv_err_intr() */
2011 ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
2016 static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
2018 void __iomem *port_mmio = mv_ap_base(ap);
2019 struct mv_host_priv *hpriv = ap->host->private_data;
2021 bool work_done = false;
2022 int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
2024 /* Get the hardware queue position index */
2025 in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
2026 >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
2028 /* Process new responses from since the last time we looked */
2029 while (in_index != pp->resp_idx) {
2031 struct mv_crpb *response = &pp->crpb[pp->resp_idx];
2033 pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK;
2035 if (IS_GEN_I(hpriv)) {
2036 /* 50xx: no NCQ, only one command active at a time */
2037 tag = ap->link.active_tag;
2039 /* Gen II/IIE: get command tag from CRPB entry */
2040 tag = le16_to_cpu(response->id) & 0x1f;
2042 mv_process_crpb_response(ap, response, tag, ncq_enabled);
2046 /* Update the software queue position index in hardware */
2048 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
2049 (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
2050 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
2053 static void mv_port_intr(struct ata_port *ap, u32 port_cause)
2055 struct mv_port_priv *pp;
2056 int edma_was_enabled;
2058 if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
2059 mv_unexpected_intr(ap, 0);
2063 * Grab a snapshot of the EDMA_EN flag setting,
2064 * so that we have a consistent view for this port,
2065 * even if something we call of our routines changes it.
2067 pp = ap->private_data;
2068 edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
2070 * Process completed CRPB response(s) before other events.
2072 if (edma_was_enabled && (port_cause & DONE_IRQ)) {
2073 mv_process_crpb_entries(ap, pp);
2074 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
2075 mv_handle_fbs_ncq_dev_err(ap);
2078 * Handle chip-reported errors, or continue on to handle PIO.
2080 if (unlikely(port_cause & ERR_IRQ)) {
2082 } else if (!edma_was_enabled) {
2083 struct ata_queued_cmd *qc = mv_get_active_qc(ap);
2085 ata_sff_host_intr(ap, qc);
2087 mv_unexpected_intr(ap, edma_was_enabled);
2092 * mv_host_intr - Handle all interrupts on the given host controller
2093 * @host: host specific structure
2094 * @main_irq_cause: Main interrupt cause register for the chip.
2097 * Inherited from caller.
2099 static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
2101 struct mv_host_priv *hpriv = host->private_data;
2102 void __iomem *mmio = hpriv->base, *hc_mmio;
2103 unsigned int handled = 0, port;
2105 for (port = 0; port < hpriv->n_ports; port++) {
2106 struct ata_port *ap = host->ports[port];
2107 unsigned int p, shift, hardport, port_cause;
2109 MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
2111 * Each hc within the host has its own hc_irq_cause register,
2112 * where the interrupting ports bits get ack'd.
2114 if (hardport == 0) { /* first port on this hc ? */
2115 u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND;
2116 u32 port_mask, ack_irqs;
2118 * Skip this entire hc if nothing pending for any ports
2121 port += MV_PORTS_PER_HC - 1;
2125 * We don't need/want to read the hc_irq_cause register,
2126 * because doing so hurts performance, and
2127 * main_irq_cause already gives us everything we need.
2129 * But we do have to *write* to the hc_irq_cause to ack
2130 * the ports that we are handling this time through.
2132 * This requires that we create a bitmap for those
2133 * ports which interrupted us, and use that bitmap
2134 * to ack (only) those ports via hc_irq_cause.
2137 for (p = 0; p < MV_PORTS_PER_HC; ++p) {
2138 if ((port + p) >= hpriv->n_ports)
2140 port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2);
2141 if (hc_cause & port_mask)
2142 ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
2144 hc_mmio = mv_hc_base_from_port(mmio, port);
2145 writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS);
2149 * Handle interrupts signalled for this port:
2151 port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
2153 mv_port_intr(ap, port_cause);
2158 static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
2160 struct mv_host_priv *hpriv = host->private_data;
2161 struct ata_port *ap;
2162 struct ata_queued_cmd *qc;
2163 struct ata_eh_info *ehi;
2164 unsigned int i, err_mask, printed = 0;
2167 err_cause = readl(mmio + hpriv->irq_cause_ofs);
2169 dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
2172 DPRINTK("All regs @ PCI error\n");
2173 mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
2175 writelfl(0, mmio + hpriv->irq_cause_ofs);
2177 for (i = 0; i < host->n_ports; i++) {
2178 ap = host->ports[i];
2179 if (!ata_link_offline(&ap->link)) {
2180 ehi = &ap->link.eh_info;
2181 ata_ehi_clear_desc(ehi);
2183 ata_ehi_push_desc(ehi,
2184 "PCI err cause 0x%08x", err_cause);
2185 err_mask = AC_ERR_HOST_BUS;
2186 ehi->action = ATA_EH_RESET;
2187 qc = ata_qc_from_tag(ap, ap->link.active_tag);
2189 qc->err_mask |= err_mask;
2191 ehi->err_mask |= err_mask;
2193 ata_port_freeze(ap);
2196 return 1; /* handled */
2200 * mv_interrupt - Main interrupt event handler
2202 * @dev_instance: private data; in this case the host structure
2204 * Read the read only register to determine if any host
2205 * controllers have pending interrupts. If so, call lower level
2206 * routine to handle. Also check for PCI errors which are only
2210 * This routine holds the host lock while processing pending
2213 static irqreturn_t mv_interrupt(int irq, void *dev_instance)
2215 struct ata_host *host = dev_instance;
2216 struct mv_host_priv *hpriv = host->private_data;
2217 unsigned int handled = 0;
2218 u32 main_irq_cause, pending_irqs;
2220 spin_lock(&host->lock);
2221 main_irq_cause = readl(hpriv->main_irq_cause_addr);
2222 pending_irqs = main_irq_cause & hpriv->main_irq_mask;
2224 * Deal with cases where we either have nothing pending, or have read
2225 * a bogus register value which can indicate HW removal or PCI fault.
2227 if (pending_irqs && main_irq_cause != 0xffffffffU) {
2228 if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
2229 handled = mv_pci_error(host, hpriv->base);
2231 handled = mv_host_intr(host, pending_irqs);
2233 spin_unlock(&host->lock);
2234 return IRQ_RETVAL(handled);
2237 static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
2241 switch (sc_reg_in) {
2245 ofs = sc_reg_in * sizeof(u32);
2254 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
2256 struct mv_host_priv *hpriv = ap->host->private_data;
2257 void __iomem *mmio = hpriv->base;
2258 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
2259 unsigned int ofs = mv5_scr_offset(sc_reg_in);
2261 if (ofs != 0xffffffffU) {
2262 *val = readl(addr + ofs);
2268 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
2270 struct mv_host_priv *hpriv = ap->host->private_data;
2271 void __iomem *mmio = hpriv->base;
2272 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
2273 unsigned int ofs = mv5_scr_offset(sc_reg_in);
2275 if (ofs != 0xffffffffU) {
2276 writelfl(val, addr + ofs);
2282 static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
2284 struct pci_dev *pdev = to_pci_dev(host->dev);
2287 early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
2290 u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
2292 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
2295 mv_reset_pci_bus(host, mmio);
2298 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
2300 writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
2303 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
2306 void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
2309 tmp = readl(phy_mmio + MV5_PHY_MODE);
2311 hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
2312 hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
2315 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
2319 writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
2321 /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
2323 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
2325 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
2328 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
2331 void __iomem *phy_mmio = mv5_phy_base(mmio, port);
2332 const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
2334 int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
2337 tmp = readl(phy_mmio + MV5_LTMODE_OFS);
2339 writel(tmp, phy_mmio + MV5_LTMODE_OFS);
2341 tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
2344 writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
2347 tmp = readl(phy_mmio + MV5_PHY_MODE);
2349 tmp |= hpriv->signal[port].pre;
2350 tmp |= hpriv->signal[port].amps;
2351 writel(tmp, phy_mmio + MV5_PHY_MODE);
2356 #define ZERO(reg) writel(0, port_mmio + (reg))
2357 static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
2360 void __iomem *port_mmio = mv_port_base(mmio, port);
2362 mv_reset_channel(hpriv, mmio, port);
2364 ZERO(0x028); /* command */
2365 writel(0x11f, port_mmio + EDMA_CFG_OFS);
2366 ZERO(0x004); /* timer */
2367 ZERO(0x008); /* irq err cause */
2368 ZERO(0x00c); /* irq err mask */
2369 ZERO(0x010); /* rq bah */
2370 ZERO(0x014); /* rq inp */
2371 ZERO(0x018); /* rq outp */
2372 ZERO(0x01c); /* respq bah */
2373 ZERO(0x024); /* respq outp */
2374 ZERO(0x020); /* respq inp */
2375 ZERO(0x02c); /* test control */
2376 writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
2380 #define ZERO(reg) writel(0, hc_mmio + (reg))
2381 static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2384 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
2392 tmp = readl(hc_mmio + 0x20);
2395 writel(tmp, hc_mmio + 0x20);
2399 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2402 unsigned int hc, port;
2404 for (hc = 0; hc < n_hc; hc++) {
2405 for (port = 0; port < MV_PORTS_PER_HC; port++)
2406 mv5_reset_hc_port(hpriv, mmio,
2407 (hc * MV_PORTS_PER_HC) + port);
2409 mv5_reset_one_hc(hpriv, mmio, hc);
2416 #define ZERO(reg) writel(0, mmio + (reg))
2417 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
2419 struct mv_host_priv *hpriv = host->private_data;
2422 tmp = readl(mmio + MV_PCI_MODE_OFS);
2424 writel(tmp, mmio + MV_PCI_MODE_OFS);
2426 ZERO(MV_PCI_DISC_TIMER);
2427 ZERO(MV_PCI_MSI_TRIGGER);
2428 writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
2429 ZERO(MV_PCI_SERR_MASK);
2430 ZERO(hpriv->irq_cause_ofs);
2431 ZERO(hpriv->irq_mask_ofs);
2432 ZERO(MV_PCI_ERR_LOW_ADDRESS);
2433 ZERO(MV_PCI_ERR_HIGH_ADDRESS);
2434 ZERO(MV_PCI_ERR_ATTRIBUTE);
2435 ZERO(MV_PCI_ERR_COMMAND);
2439 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
2443 mv5_reset_flash(hpriv, mmio);
2445 tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
2447 tmp |= (1 << 5) | (1 << 6);
2448 writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
2452 * mv6_reset_hc - Perform the 6xxx global soft reset
2453 * @mmio: base address of the HBA
2455 * This routine only applies to 6xxx parts.
2458 * Inherited from caller.
2460 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2463 void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
2467 /* Following procedure defined in PCI "main command and status
2471 writel(t | STOP_PCI_MASTER, reg);
2473 for (i = 0; i < 1000; i++) {
2476 if (PCI_MASTER_EMPTY & t)
2479 if (!(PCI_MASTER_EMPTY & t)) {
2480 printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
2488 writel(t | GLOB_SFT_RST, reg);
2491 } while (!(GLOB_SFT_RST & t) && (i-- > 0));
2493 if (!(GLOB_SFT_RST & t)) {
2494 printk(KERN_ERR DRV_NAME ": can't set global reset\n");
2499 /* clear reset and *reenable the PCI master* (not mentioned in spec) */
2502 writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
2505 } while ((GLOB_SFT_RST & t) && (i-- > 0));
2507 if (GLOB_SFT_RST & t) {
2508 printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
2515 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
2518 void __iomem *port_mmio;
2521 tmp = readl(mmio + MV_RESET_CFG_OFS);
2522 if ((tmp & (1 << 0)) == 0) {
2523 hpriv->signal[idx].amps = 0x7 << 8;
2524 hpriv->signal[idx].pre = 0x1 << 5;
2528 port_mmio = mv_port_base(mmio, idx);
2529 tmp = readl(port_mmio + PHY_MODE2);
2531 hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
2532 hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
2535 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
2537 writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
2540 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
2543 void __iomem *port_mmio = mv_port_base(mmio, port);
2545 u32 hp_flags = hpriv->hp_flags;
2547 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2549 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2552 if (fix_phy_mode2) {
2553 m2 = readl(port_mmio + PHY_MODE2);
2556 writel(m2, port_mmio + PHY_MODE2);
2560 m2 = readl(port_mmio + PHY_MODE2);
2561 m2 &= ~((1 << 16) | (1 << 31));
2562 writel(m2, port_mmio + PHY_MODE2);
2568 * Gen-II/IIe PHY_MODE3 errata RM#2:
2569 * Achieves better receiver noise performance than the h/w default:
2571 m3 = readl(port_mmio + PHY_MODE3);
2572 m3 = (m3 & 0x1f) | (0x5555601 << 5);
2574 /* Guideline 88F5182 (GL# SATA-S11) */
2578 if (fix_phy_mode4) {
2579 u32 m4 = readl(port_mmio + PHY_MODE4);
2581 * Enforce reserved-bit restrictions on GenIIe devices only.
2582 * For earlier chipsets, force only the internal config field
2583 * (workaround for errata FEr SATA#10 part 1).
2585 if (IS_GEN_IIE(hpriv))
2586 m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
2588 m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
2589 writel(m4, port_mmio + PHY_MODE4);
2592 * Workaround for 60x1-B2 errata SATA#13:
2593 * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
2594 * so we must always rewrite PHY_MODE3 after PHY_MODE4.
2596 writel(m3, port_mmio + PHY_MODE3);
2598 /* Revert values of pre-emphasis and signal amps to the saved ones */
2599 m2 = readl(port_mmio + PHY_MODE2);
2601 m2 &= ~MV_M2_PREAMP_MASK;
2602 m2 |= hpriv->signal[port].amps;
2603 m2 |= hpriv->signal[port].pre;
2606 /* according to mvSata 3.6.1, some IIE values are fixed */
2607 if (IS_GEN_IIE(hpriv)) {
2612 writel(m2, port_mmio + PHY_MODE2);
2615 /* TODO: use the generic LED interface to configure the SATA Presence */
2616 /* & Acitivy LEDs on the board */
2617 static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
2623 static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
2626 void __iomem *port_mmio;
2629 port_mmio = mv_port_base(mmio, idx);
2630 tmp = readl(port_mmio + PHY_MODE2);
2632 hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
2633 hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
2637 #define ZERO(reg) writel(0, port_mmio + (reg))
2638 static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
2639 void __iomem *mmio, unsigned int port)
2641 void __iomem *port_mmio = mv_port_base(mmio, port);
2643 mv_reset_channel(hpriv, mmio, port);
2645 ZERO(0x028); /* command */
2646 writel(0x101f, port_mmio + EDMA_CFG_OFS);
2647 ZERO(0x004); /* timer */
2648 ZERO(0x008); /* irq err cause */
2649 ZERO(0x00c); /* irq err mask */
2650 ZERO(0x010); /* rq bah */
2651 ZERO(0x014); /* rq inp */
2652 ZERO(0x018); /* rq outp */
2653 ZERO(0x01c); /* respq bah */
2654 ZERO(0x024); /* respq outp */
2655 ZERO(0x020); /* respq inp */
2656 ZERO(0x02c); /* test control */
2657 writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
2662 #define ZERO(reg) writel(0, hc_mmio + (reg))
2663 static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv,
2666 void __iomem *hc_mmio = mv_hc_base(mmio, 0);
2676 static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
2677 void __iomem *mmio, unsigned int n_hc)
2681 for (port = 0; port < hpriv->n_ports; port++)
2682 mv_soc_reset_hc_port(hpriv, mmio, port);
2684 mv_soc_reset_one_hc(hpriv, mmio);
2689 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
2695 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
2700 static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
2702 u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
2704 ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
2706 ifcfg |= (1 << 7); /* enable gen2i speed */
2707 writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
2710 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
2711 unsigned int port_no)
2713 void __iomem *port_mmio = mv_port_base(mmio, port_no);
2716 * The datasheet warns against setting EDMA_RESET when EDMA is active
2717 * (but doesn't say what the problem might be). So we first try
2718 * to disable the EDMA engine before doing the EDMA_RESET operation.
2720 mv_stop_edma_engine(port_mmio);
2721 writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
2723 if (!IS_GEN_I(hpriv)) {
2724 /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
2725 mv_setup_ifcfg(port_mmio, 1);
2728 * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
2729 * link, and physical layers. It resets all SATA interface registers
2730 * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
2732 writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
2733 udelay(25); /* allow reset propagation */
2734 writelfl(0, port_mmio + EDMA_CMD_OFS);
2736 hpriv->ops->phy_errata(hpriv, mmio, port_no);
2738 if (IS_GEN_I(hpriv))
2742 static void mv_pmp_select(struct ata_port *ap, int pmp)
2744 if (sata_pmp_supported(ap)) {
2745 void __iomem *port_mmio = mv_ap_base(ap);
2746 u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
2747 int old = reg & 0xf;
2750 reg = (reg & ~0xf) | pmp;
2751 writelfl(reg, port_mmio + SATA_IFCTL_OFS);
2756 static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
2757 unsigned long deadline)
2759 mv_pmp_select(link->ap, sata_srst_pmp(link));
2760 return sata_std_hardreset(link, class, deadline);
2763 static int mv_softreset(struct ata_link *link, unsigned int *class,
2764 unsigned long deadline)
2766 mv_pmp_select(link->ap, sata_srst_pmp(link));
2767 return ata_sff_softreset(link, class, deadline);
2770 static int mv_hardreset(struct ata_link *link, unsigned int *class,
2771 unsigned long deadline)
2773 struct ata_port *ap = link->ap;
2774 struct mv_host_priv *hpriv = ap->host->private_data;
2775 struct mv_port_priv *pp = ap->private_data;
2776 void __iomem *mmio = hpriv->base;
2777 int rc, attempts = 0, extra = 0;
2781 mv_reset_channel(hpriv, mmio, ap->port_no);
2782 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
2784 /* Workaround for errata FEr SATA#10 (part 2) */
2786 const unsigned long *timing =
2787 sata_ehc_deb_timing(&link->eh_context);
2789 rc = sata_link_hardreset(link, timing, deadline + extra,
2791 rc = online ? -EAGAIN : rc;
2794 sata_scr_read(link, SCR_STATUS, &sstatus);
2795 if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
2796 /* Force 1.5gb/s link speed and try again */
2797 mv_setup_ifcfg(mv_ap_base(ap), 0);
2798 if (time_after(jiffies + HZ, deadline))
2799 extra = HZ; /* only extend it once, max */
2801 } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
2806 static void mv_eh_freeze(struct ata_port *ap)
2809 mv_enable_port_irqs(ap, 0);
2812 static void mv_eh_thaw(struct ata_port *ap)
2814 struct mv_host_priv *hpriv = ap->host->private_data;
2815 unsigned int port = ap->port_no;
2816 unsigned int hardport = mv_hardport_from_port(port);
2817 void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
2818 void __iomem *port_mmio = mv_ap_base(ap);
2821 /* clear EDMA errors on this port */
2822 writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2824 /* clear pending irq events */
2825 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
2826 hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
2827 writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
2829 mv_enable_port_irqs(ap, ERR_IRQ);
2833 * mv_port_init - Perform some early initialization on a single port.
2834 * @port: libata data structure storing shadow register addresses
2835 * @port_mmio: base address of the port
2837 * Initialize shadow register mmio addresses, clear outstanding
2838 * interrupts on the port, and unmask interrupts for the future
2839 * start of the port.
2842 * Inherited from caller.
2844 static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
2846 void __iomem *shd_base = port_mmio + SHD_BLK_OFS;
2849 /* PIO related setup
2851 port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
2853 port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
2854 port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
2855 port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
2856 port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
2857 port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
2858 port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
2860 port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
2861 /* special case: control/altstatus doesn't have ATA_REG_ address */
2862 port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
2865 port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
2867 /* Clear any currently outstanding port interrupt conditions */
2868 serr_ofs = mv_scr_offset(SCR_ERROR);
2869 writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
2870 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2872 /* unmask all non-transient EDMA error interrupts */
2873 writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
2875 VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
2876 readl(port_mmio + EDMA_CFG_OFS),
2877 readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
2878 readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
2881 static unsigned int mv_in_pcix_mode(struct ata_host *host)
2883 struct mv_host_priv *hpriv = host->private_data;
2884 void __iomem *mmio = hpriv->base;
2887 if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
2888 return 0; /* not PCI-X capable */
2889 reg = readl(mmio + MV_PCI_MODE_OFS);
2890 if ((reg & MV_PCI_MODE_MASK) == 0)
2891 return 0; /* conventional PCI mode */
2892 return 1; /* chip is in PCI-X mode */
2895 static int mv_pci_cut_through_okay(struct ata_host *host)
2897 struct mv_host_priv *hpriv = host->private_data;
2898 void __iomem *mmio = hpriv->base;
2901 if (!mv_in_pcix_mode(host)) {
2902 reg = readl(mmio + PCI_COMMAND_OFS);
2903 if (reg & PCI_COMMAND_MRDTRIG)
2904 return 0; /* not okay */
2906 return 1; /* okay */
2909 static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
2911 struct pci_dev *pdev = to_pci_dev(host->dev);
2912 struct mv_host_priv *hpriv = host->private_data;
2913 u32 hp_flags = hpriv->hp_flags;
2915 switch (board_idx) {
2917 hpriv->ops = &mv5xxx_ops;
2918 hp_flags |= MV_HP_GEN_I;
2920 switch (pdev->revision) {
2922 hp_flags |= MV_HP_ERRATA_50XXB0;
2925 hp_flags |= MV_HP_ERRATA_50XXB2;
2928 dev_printk(KERN_WARNING, &pdev->dev,
2929 "Applying 50XXB2 workarounds to unknown rev\n");
2930 hp_flags |= MV_HP_ERRATA_50XXB2;
2937 hpriv->ops = &mv5xxx_ops;
2938 hp_flags |= MV_HP_GEN_I;
2940 switch (pdev->revision) {
2942 hp_flags |= MV_HP_ERRATA_50XXB0;
2945 hp_flags |= MV_HP_ERRATA_50XXB2;
2948 dev_printk(KERN_WARNING, &pdev->dev,
2949 "Applying B2 workarounds to unknown rev\n");
2950 hp_flags |= MV_HP_ERRATA_50XXB2;
2957 hpriv->ops = &mv6xxx_ops;
2958 hp_flags |= MV_HP_GEN_II;
2960 switch (pdev->revision) {
2962 hp_flags |= MV_HP_ERRATA_60X1B2;
2965 hp_flags |= MV_HP_ERRATA_60X1C0;
2968 dev_printk(KERN_WARNING, &pdev->dev,
2969 "Applying B2 workarounds to unknown rev\n");
2970 hp_flags |= MV_HP_ERRATA_60X1B2;
2976 hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
2977 if (pdev->vendor == PCI_VENDOR_ID_TTI &&
2978 (pdev->device == 0x2300 || pdev->device == 0x2310))
2981 * Highpoint RocketRAID PCIe 23xx series cards:
2983 * Unconfigured drives are treated as "Legacy"
2984 * by the BIOS, and it overwrites sector 8 with
2985 * a "Lgcy" metadata block prior to Linux boot.
2987 * Configured drives (RAID or JBOD) leave sector 8
2988 * alone, but instead overwrite a high numbered
2989 * sector for the RAID metadata. This sector can
2990 * be determined exactly, by truncating the physical
2991 * drive capacity to a nice even GB value.
2993 * RAID metadata is at: (dev->n_sectors & ~0xfffff)
2995 * Warn the user, lest they think we're just buggy.
2997 printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
2998 " BIOS CORRUPTS DATA on all attached drives,"
2999 " regardless of if/how they are configured."
3001 printk(KERN_WARNING DRV_NAME ": For data safety, do not"
3002 " use sectors 8-9 on \"Legacy\" drives,"
3003 " and avoid the final two gigabytes on"
3004 " all RocketRAID BIOS initialized drives.\n");
3008 hpriv->ops = &mv6xxx_ops;
3009 hp_flags |= MV_HP_GEN_IIE;
3010 if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
3011 hp_flags |= MV_HP_CUT_THROUGH;
3013 switch (pdev->revision) {
3014 case 0x2: /* Rev.B0: the first/only public release */
3015 hp_flags |= MV_HP_ERRATA_60X1C0;
3018 dev_printk(KERN_WARNING, &pdev->dev,
3019 "Applying 60X1C0 workarounds to unknown rev\n");
3020 hp_flags |= MV_HP_ERRATA_60X1C0;
3025 hpriv->ops = &mv_soc_ops;
3026 hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
3027 MV_HP_ERRATA_60X1C0;
3031 dev_printk(KERN_ERR, host->dev,
3032 "BUG: invalid board index %u\n", board_idx);
3036 hpriv->hp_flags = hp_flags;
3037 if (hp_flags & MV_HP_PCIE) {
3038 hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS;
3039 hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS;
3040 hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
3042 hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS;
3043 hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS;
3044 hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
3051 * mv_init_host - Perform some early initialization of the host.
3052 * @host: ATA host to initialize
3053 * @board_idx: controller index
3055 * If possible, do an early global reset of the host. Then do
3056 * our port init and clear/unmask all/relevant host interrupts.
3059 * Inherited from caller.
3061 static int mv_init_host(struct ata_host *host, unsigned int board_idx)
3063 int rc = 0, n_hc, port, hc;
3064 struct mv_host_priv *hpriv = host->private_data;
3065 void __iomem *mmio = hpriv->base;
3067 rc = mv_chip_id(host, board_idx);
3071 if (IS_SOC(hpriv)) {
3072 hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
3073 hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
3075 hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
3076 hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
3079 /* global interrupt mask: 0 == mask everything */
3080 mv_set_main_irq_mask(host, ~0, 0);
3082 n_hc = mv_get_hc_count(host->ports[0]->flags);
3084 for (port = 0; port < host->n_ports; port++)
3085 hpriv->ops->read_preamp(hpriv, port, mmio);
3087 rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
3091 hpriv->ops->reset_flash(hpriv, mmio);
3092 hpriv->ops->reset_bus(host, mmio);
3093 hpriv->ops->enable_leds(hpriv, mmio);
3095 for (port = 0; port < host->n_ports; port++) {
3096 struct ata_port *ap = host->ports[port];
3097 void __iomem *port_mmio = mv_port_base(mmio, port);
3099 mv_port_init(&ap->ioaddr, port_mmio);
3102 if (!IS_SOC(hpriv)) {
3103 unsigned int offset = port_mmio - mmio;
3104 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
3105 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
3110 for (hc = 0; hc < n_hc; hc++) {
3111 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
3113 VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
3114 "(before clear)=0x%08x\n", hc,
3115 readl(hc_mmio + HC_CFG_OFS),
3116 readl(hc_mmio + HC_IRQ_CAUSE_OFS));
3118 /* Clear any currently outstanding hc interrupt conditions */
3119 writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
3122 if (!IS_SOC(hpriv)) {
3123 /* Clear any currently outstanding host interrupt conditions */
3124 writelfl(0, mmio + hpriv->irq_cause_ofs);
3126 /* and unmask interrupt generation for host regs */
3127 writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
3130 * enable only global host interrupts for now.
3131 * The per-port interrupts get done later as ports are set up.
3133 mv_set_main_irq_mask(host, 0, PCI_ERR);
3139 static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
3141 hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
3143 if (!hpriv->crqb_pool)
3146 hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
3148 if (!hpriv->crpb_pool)
3151 hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
3153 if (!hpriv->sg_tbl_pool)
3159 static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
3160 struct mbus_dram_target_info *dram)
3164 for (i = 0; i < 4; i++) {
3165 writel(0, hpriv->base + WINDOW_CTRL(i));
3166 writel(0, hpriv->base + WINDOW_BASE(i));
3169 for (i = 0; i < dram->num_cs; i++) {
3170 struct mbus_dram_window *cs = dram->cs + i;
3172 writel(((cs->size - 1) & 0xffff0000) |
3173 (cs->mbus_attr << 8) |
3174 (dram->mbus_dram_target_id << 4) | 1,
3175 hpriv->base + WINDOW_CTRL(i));
3176 writel(cs->base, hpriv->base + WINDOW_BASE(i));
3181 * mv_platform_probe - handle a positive probe of an soc Marvell
3183 * @pdev: platform device found
3186 * Inherited from caller.
3188 static int mv_platform_probe(struct platform_device *pdev)
3190 static int printed_version;
3191 const struct mv_sata_platform_data *mv_platform_data;
3192 const struct ata_port_info *ppi[] =
3193 { &mv_port_info[chip_soc], NULL };
3194 struct ata_host *host;
3195 struct mv_host_priv *hpriv;
3196 struct resource *res;
3199 if (!printed_version++)
3200 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
3203 * Simple resource validation ..
3205 if (unlikely(pdev->num_resources != 2)) {
3206 dev_err(&pdev->dev, "invalid number of resources\n");
3211 * Get the register base first
3213 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
3218 mv_platform_data = pdev->dev.platform_data;
3219 n_ports = mv_platform_data->n_ports;
3221 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
3222 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
3224 if (!host || !hpriv)
3226 host->private_data = hpriv;
3227 hpriv->n_ports = n_ports;
3230 hpriv->base = devm_ioremap(&pdev->dev, res->start,
3231 res->end - res->start + 1);
3232 hpriv->base -= MV_SATAHC0_REG_BASE;
3235 * (Re-)program MBUS remapping windows if we are asked to.
3237 if (mv_platform_data->dram != NULL)
3238 mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
3240 rc = mv_create_dma_pools(hpriv, &pdev->dev);
3244 /* initialize adapter */
3245 rc = mv_init_host(host, chip_soc);
3249 dev_printk(KERN_INFO, &pdev->dev,
3250 "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
3253 return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
3254 IRQF_SHARED, &mv6_sht);
3259 * mv_platform_remove - unplug a platform interface
3260 * @pdev: platform device
3262 * A platform bus SATA device has been unplugged. Perform the needed
3263 * cleanup. Also called on module unload for any active devices.
3265 static int __devexit mv_platform_remove(struct platform_device *pdev)
3267 struct device *dev = &pdev->dev;
3268 struct ata_host *host = dev_get_drvdata(dev);
3270 ata_host_detach(host);
3274 static struct platform_driver mv_platform_driver = {
3275 .probe = mv_platform_probe,
3276 .remove = __devexit_p(mv_platform_remove),
3279 .owner = THIS_MODULE,
3285 static int mv_pci_init_one(struct pci_dev *pdev,
3286 const struct pci_device_id *ent);
3289 static struct pci_driver mv_pci_driver = {
3291 .id_table = mv_pci_tbl,
3292 .probe = mv_pci_init_one,
3293 .remove = ata_pci_remove_one,
3299 static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
3302 /* move to PCI layer or libata core? */
3303 static int pci_go_64(struct pci_dev *pdev)
3307 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
3308 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3310 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
3312 dev_printk(KERN_ERR, &pdev->dev,
3313 "64-bit DMA enable failed\n");
3318 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3320 dev_printk(KERN_ERR, &pdev->dev,
3321 "32-bit DMA enable failed\n");
3324 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
3326 dev_printk(KERN_ERR, &pdev->dev,
3327 "32-bit consistent DMA enable failed\n");
3336 * mv_print_info - Dump key info to kernel log for perusal.
3337 * @host: ATA host to print info about
3339 * FIXME: complete this.
3342 * Inherited from caller.
3344 static void mv_print_info(struct ata_host *host)
3346 struct pci_dev *pdev = to_pci_dev(host->dev);
3347 struct mv_host_priv *hpriv = host->private_data;
3349 const char *scc_s, *gen;
3351 /* Use this to determine the HW stepping of the chip so we know
3352 * what errata to workaround
3354 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
3357 else if (scc == 0x01)
3362 if (IS_GEN_I(hpriv))
3364 else if (IS_GEN_II(hpriv))
3366 else if (IS_GEN_IIE(hpriv))
3371 dev_printk(KERN_INFO, &pdev->dev,
3372 "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
3373 gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
3374 scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
3378 * mv_pci_init_one - handle a positive probe of a PCI Marvell host
3379 * @pdev: PCI device found
3380 * @ent: PCI device ID entry for the matched host
3383 * Inherited from caller.
3385 static int mv_pci_init_one(struct pci_dev *pdev,
3386 const struct pci_device_id *ent)
3388 static int printed_version;
3389 unsigned int board_idx = (unsigned int)ent->driver_data;
3390 const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
3391 struct ata_host *host;
3392 struct mv_host_priv *hpriv;
3395 if (!printed_version++)
3396 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
3399 n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
3401 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
3402 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
3403 if (!host || !hpriv)
3405 host->private_data = hpriv;
3406 hpriv->n_ports = n_ports;
3408 /* acquire resources */
3409 rc = pcim_enable_device(pdev);
3413 rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
3415 pcim_pin_device(pdev);
3418 host->iomap = pcim_iomap_table(pdev);
3419 hpriv->base = host->iomap[MV_PRIMARY_BAR];
3421 rc = pci_go_64(pdev);
3425 rc = mv_create_dma_pools(hpriv, &pdev->dev);
3429 /* initialize adapter */
3430 rc = mv_init_host(host, board_idx);
3434 /* Enable interrupts */
3435 if (msi && pci_enable_msi(pdev))
3438 mv_dump_pci_cfg(pdev, 0x68);
3439 mv_print_info(host);
3441 pci_set_master(pdev);
3442 pci_try_set_mwi(pdev);
3443 return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
3444 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
3448 static int mv_platform_probe(struct platform_device *pdev);
3449 static int __devexit mv_platform_remove(struct platform_device *pdev);
3451 static int __init mv_init(void)
3455 rc = pci_register_driver(&mv_pci_driver);
3459 rc = platform_driver_register(&mv_platform_driver);
3463 pci_unregister_driver(&mv_pci_driver);
3468 static void __exit mv_exit(void)
3471 pci_unregister_driver(&mv_pci_driver);
3473 platform_driver_unregister(&mv_platform_driver);
3476 MODULE_AUTHOR("Brett Russ");
3477 MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
3478 MODULE_LICENSE("GPL");
3479 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
3480 MODULE_VERSION(DRV_VERSION);
3481 MODULE_ALIAS("platform:" DRV_NAME);
3484 module_param(msi, int, 0444);
3485 MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
3488 module_init(mv_init);
3489 module_exit(mv_exit);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blob