SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/x86/oprofile/op_model_ppro.c

   1 /*
   2  * @file op_model_ppro.h
   3  * Family 6 perfmon and architectural perfmon MSR operations
   4  *
   5  * @remark Copyright 2002 OProfile authors
   6  * @remark Copyright 2008 Intel Corporation
   7  * @remark Read the file COPYING
   8  *
   9  * @author John Levon
  10  * @author Philippe Elie
  11  * @author Graydon Hoare
  12  * @author Andi Kleen
  13  */
  14
  15 #include <linux/oprofile.h>
  16 #include <linux/slab.h>
  17 #include <asm/ptrace.h>
  18 #include <asm/msr.h>
  19 #include <asm/apic.h>
  20 #include <asm/nmi.h>
  21 #include <asm/intel_arch_perfmon.h>
  22
  23 #include "op_x86_model.h"
  24 #include "op_counter.h"
  25
  26 static int num_counters = 2;
  27 static int counter_width = 32;
  28
  29 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
  30 #define CTRL_CLEAR(x) (x &= (1<<21))
  31 #define CTRL_SET_EVENT(val, e) (val |= e)
  32
  33 static u64 *reset_value;
  34
  35 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
  36 {
  37         int i;
  38
  39         for (i = 0; i < num_counters; i++) {
  40                 if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
  41                         msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
  42                 else
  43                         msrs->counters[i].addr = 0;
  44         }
  45
  46         for (i = 0; i < num_counters; i++) {
  47                 if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
  48                         msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
  49                 else
  50                         msrs->controls[i].addr = 0;
  51         }
  52 }
  53
  54
  55 static void ppro_setup_ctrs(struct op_msrs const * const msrs)
  56 {
  57         unsigned int low, high;
  58         int i;
  59
  60         if (!reset_value) {
  61                 reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
  62                                         GFP_ATOMIC);
  63                 if (!reset_value)
  64                         return;
  65         }
  66
  67         if (cpu_has_arch_perfmon) {
  68                 union cpuid10_eax eax;
  69                 eax.full = cpuid_eax(0xa);
  70
  71                 /*
  72                  * For Core2 (family 6, model 15), don't reset the
  73                  * counter width:
  74                  */
  75                 if (!(eax.split.version_id == 0 &&
  76                         current_cpu_data.x86 == 6 &&
  77                                 current_cpu_data.x86_model == 15)) {
  78
  79                         if (counter_width < eax.split.bit_width)
  80                                 counter_width = eax.split.bit_width;
  81                 }
  82         }
  83
  84         /* clear all counters */
  85         for (i = 0 ; i < num_counters; ++i) {
  86                 if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
  87                         continue;
  88                 rdmsr(msrs->controls[i].addr, low, high);
  89                 CTRL_CLEAR(low);
  90                 wrmsr(msrs->controls[i].addr, low, high);
  91         }
  92
  93         /* avoid a false detection of ctr overflows in NMI handler */
  94         for (i = 0; i < num_counters; ++i) {
  95                 if (unlikely(!CTR_IS_RESERVED(msrs, i)))
  96                         continue;
  97                 wrmsrl(msrs->counters[i].addr, -1LL);
  98         }
  99
 100         /* enable active counters */
 101         for (i = 0; i < num_counters; ++i) {
 102                 if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 103                         reset_value[i] = counter_config[i].count;
 104
 105                         wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 106
 107                         rdmsr(msrs->controls[i].addr, low, high);
 108                         CTRL_CLEAR(low);
 109                         CTRL_SET_ENABLE(low);
 110                         CTRL_SET_USR(low, counter_config[i].user);
 111                         CTRL_SET_KERN(low, counter_config[i].kernel);
 112                         CTRL_SET_UM(low, counter_config[i].unit_mask);
 113                         CTRL_SET_EVENT(low, counter_config[i].event);
 114                         wrmsr(msrs->controls[i].addr, low, high);
 115                 } else {
 116                         reset_value[i] = 0;
 117                 }
 118         }
 119 }
 120
 121
 122 static int ppro_check_ctrs(struct pt_regs * const regs,
 123                            struct op_msrs const * const msrs)
 124 {
 125         u64 val;
 126         int i;
 127
 128         for (i = 0 ; i < num_counters; ++i) {
 129                 if (!reset_value[i])
 130                         continue;
 131                 rdmsrl(msrs->counters[i].addr, val);
 132                 if (CTR_OVERFLOWED(val)) {
 133                         oprofile_add_sample(regs, i);
 134                         wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 135                 }
 136         }
 137
 138         /* Only P6 based Pentium M need to re-unmask the apic vector but it
 139          * doesn't hurt other P6 variant */
 140         apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
 141
 142         /* We can't work out if we really handled an interrupt. We
 143          * might have caught a *second* counter just after overflowing
 144          * the interrupt for this counter then arrives
 145          * and we don't find a counter that's overflowed, so we
 146          * would return 0 and get dazed + confused. Instead we always
 147          * assume we found an overflow. This sucks.
 148          */
 149         return 1;
 150 }
 151
 152
 153 static void ppro_start(struct op_msrs const * const msrs)
 154 {
 155         unsigned int low, high;
 156         int i;
 157
 158         if (!reset_value)
 159                 return;
 160         for (i = 0; i < num_counters; ++i) {
 161                 if (reset_value[i]) {
 162                         rdmsr(msrs->controls[i].addr, low, high);
 163                         CTRL_SET_ACTIVE(low);
 164                         wrmsr(msrs->controls[i].addr, low, high);
 165                 }
 166         }
 167 }
 168
 169
 170 static void ppro_stop(struct op_msrs const * const msrs)
 171 {
 172         unsigned int low, high;
 173         int i;
 174
 175         if (!reset_value)
 176                 return;
 177         for (i = 0; i < num_counters; ++i) {
 178                 if (!reset_value[i])
 179                         continue;
 180                 rdmsr(msrs->controls[i].addr, low, high);
 181                 CTRL_SET_INACTIVE(low);
 182                 wrmsr(msrs->controls[i].addr, low, high);
 183         }
 184 }
 185
 186 static void ppro_shutdown(struct op_msrs const * const msrs)
 187 {
 188         int i;
 189
 190         for (i = 0 ; i < num_counters ; ++i) {
 191                 if (CTR_IS_RESERVED(msrs, i))
 192                         release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 193         }
 194         for (i = 0 ; i < num_counters ; ++i) {
 195                 if (CTRL_IS_RESERVED(msrs, i))
 196                         release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 197         }
 198         if (reset_value) {
 199                 kfree(reset_value);
 200                 reset_value = NULL;
 201         }
 202 }
 203
 204
 205 struct op_x86_model_spec const op_ppro_spec = {
 206         .num_counters           = 2,
 207         .num_controls           = 2,
 208         .fill_in_addresses      = &ppro_fill_in_addresses,
 209         .setup_ctrs             = &ppro_setup_ctrs,
 210         .check_ctrs             = &ppro_check_ctrs,
 211         .start                  = &ppro_start,
 212         .stop                   = &ppro_stop,
 213         .shutdown               = &ppro_shutdown
 214 };
 215
 216 /*
 217  * Architectural performance monitoring.
 218  *
 219  * Newer Intel CPUs (Core1+) have support for architectural
 220  * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
 221  * The advantage of this is that it can be done without knowing about
 222  * the specific CPU.
 223  */
 224
 225 static void arch_perfmon_setup_counters(void)
 226 {
 227         union cpuid10_eax eax;
 228
 229         eax.full = cpuid_eax(0xa);
 230
 231         /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
 232         if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
 233                 current_cpu_data.x86_model == 15) {
 234                 eax.split.version_id = 2;
 235                 eax.split.num_counters = 2;
 236                 eax.split.bit_width = 40;
 237         }
 238
 239         num_counters = eax.split.num_counters;
 240
 241         op_arch_perfmon_spec.num_counters = num_counters;
 242         op_arch_perfmon_spec.num_controls = num_counters;
 243 }
 244
 245 static int arch_perfmon_init(struct oprofile_operations *ignore)
 246 {
 247         arch_perfmon_setup_counters();
 248         return 0;
 249 }
 250
 251 struct op_x86_model_spec op_arch_perfmon_spec = {
 252         .init                   = &arch_perfmon_init,
 253         /* num_counters/num_controls filled in at runtime */
 254         .fill_in_addresses      = &ppro_fill_in_addresses,
 255         /* user space does the cpuid check for available events */
 256         .setup_ctrs             = &ppro_setup_ctrs,
 257         .check_ctrs             = &ppro_check_ctrs,
 258         .start                  = &ppro_start,
 259         .stop                   = &ppro_stop,
 260         .shutdown               = &ppro_shutdown
 261 };