x86: unify the implementation of FPU traps
[safe/jmp/linux-2.6] / arch / x86 / kernel / traps.c
1 /*
2  *  Copyright (C) 1991, 1992  Linus Torvalds
3  *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
4  *
5  *  Pentium III FXSR, SSE support
6  *      Gareth Hughes <gareth@valinux.com>, May 2000
7  */
8
9 /*
10  * Handle hardware traps and faults.
11  */
12 #include <linux/interrupt.h>
13 #include <linux/kallsyms.h>
14 #include <linux/spinlock.h>
15 #include <linux/kprobes.h>
16 #include <linux/uaccess.h>
17 #include <linux/utsname.h>
18 #include <linux/kdebug.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/ptrace.h>
22 #include <linux/string.h>
23 #include <linux/unwind.h>
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/kexec.h>
27 #include <linux/sched.h>
28 #include <linux/timer.h>
29 #include <linux/init.h>
30 #include <linux/bug.h>
31 #include <linux/nmi.h>
32 #include <linux/mm.h>
33 #include <linux/smp.h>
34 #include <linux/io.h>
35
36 #ifdef CONFIG_EISA
37 #include <linux/ioport.h>
38 #include <linux/eisa.h>
39 #endif
40
41 #ifdef CONFIG_MCA
42 #include <linux/mca.h>
43 #endif
44
45 #if defined(CONFIG_EDAC)
46 #include <linux/edac.h>
47 #endif
48
49 #include <asm/stacktrace.h>
50 #include <asm/processor.h>
51 #include <asm/debugreg.h>
52 #include <asm/atomic.h>
53 #include <asm/system.h>
54 #include <asm/unwind.h>
55 #include <asm/traps.h>
56 #include <asm/desc.h>
57 #include <asm/i387.h>
58
59 #include <mach_traps.h>
60
61 #ifdef CONFIG_X86_64
62 #include <asm/pgalloc.h>
63 #include <asm/proto.h>
64 #include <asm/pda.h>
65 #else
66 #include <asm/processor-flags.h>
67 #include <asm/arch_hooks.h>
68 #include <asm/nmi.h>
69 #include <asm/smp.h>
70 #include <asm/io.h>
71 #include <asm/traps.h>
72
73 #include "cpu/mcheck/mce.h"
74
75 DECLARE_BITMAP(used_vectors, NR_VECTORS);
76 EXPORT_SYMBOL_GPL(used_vectors);
77
78 asmlinkage int system_call(void);
79
80 /* Do we ignore FPU interrupts ? */
81 char ignore_fpu_irq;
82
83 /*
84  * The IDT has to be page-aligned to simplify the Pentium
85  * F0 0F bug workaround.. We have a special link segment
86  * for this.
87  */
88 gate_desc idt_table[256]
89         __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
90 #endif
91
92 static int ignore_nmis;
93
94 static inline void conditional_sti(struct pt_regs *regs)
95 {
96         if (regs->flags & X86_EFLAGS_IF)
97                 local_irq_enable();
98 }
99
100 static inline void preempt_conditional_sti(struct pt_regs *regs)
101 {
102         inc_preempt_count();
103         if (regs->flags & X86_EFLAGS_IF)
104                 local_irq_enable();
105 }
106
107 static inline void preempt_conditional_cli(struct pt_regs *regs)
108 {
109         if (regs->flags & X86_EFLAGS_IF)
110                 local_irq_disable();
111         dec_preempt_count();
112 }
113
114 #ifdef CONFIG_X86_32
115 static inline void
116 die_if_kernel(const char *str, struct pt_regs *regs, long err)
117 {
118         if (!user_mode_vm(regs))
119                 die(str, regs, err);
120 }
121
122 /*
123  * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
124  * invalid offset set (the LAZY one) and the faulting thread has
125  * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS,
126  * we set the offset field correctly and return 1.
127  */
128 static int lazy_iobitmap_copy(void)
129 {
130         struct thread_struct *thread;
131         struct tss_struct *tss;
132         int cpu;
133
134         cpu = get_cpu();
135         tss = &per_cpu(init_tss, cpu);
136         thread = &current->thread;
137
138         if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
139             thread->io_bitmap_ptr) {
140                 memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
141                        thread->io_bitmap_max);
142                 /*
143                  * If the previously set map was extending to higher ports
144                  * than the current one, pad extra space with 0xff (no access).
145                  */
146                 if (thread->io_bitmap_max < tss->io_bitmap_max) {
147                         memset((char *) tss->io_bitmap +
148                                 thread->io_bitmap_max, 0xff,
149                                 tss->io_bitmap_max - thread->io_bitmap_max);
150                 }
151                 tss->io_bitmap_max = thread->io_bitmap_max;
152                 tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
153                 tss->io_bitmap_owner = thread;
154                 put_cpu();
155
156                 return 1;
157         }
158         put_cpu();
159
160         return 0;
161 }
162 #endif
163
164 static void __kprobes
165 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
166         long error_code, siginfo_t *info)
167 {
168         struct task_struct *tsk = current;
169
170 #ifdef CONFIG_X86_32
171         if (regs->flags & X86_VM_MASK) {
172                 /*
173                  * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
174                  * On nmi (interrupt 2), do_trap should not be called.
175                  */
176                 if (trapnr < 6)
177                         goto vm86_trap;
178                 goto trap_signal;
179         }
180 #endif
181
182         if (!user_mode(regs))
183                 goto kernel_trap;
184
185 #ifdef CONFIG_X86_32
186 trap_signal:
187 #endif
188         /*
189          * We want error_code and trap_no set for userspace faults and
190          * kernelspace faults which result in die(), but not
191          * kernelspace faults which are fixed up.  die() gives the
192          * process no chance to handle the signal and notice the
193          * kernel fault information, so that won't result in polluting
194          * the information about previously queued, but not yet
195          * delivered, faults.  See also do_general_protection below.
196          */
197         tsk->thread.error_code = error_code;
198         tsk->thread.trap_no = trapnr;
199
200 #ifdef CONFIG_X86_64
201         if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
202             printk_ratelimit()) {
203                 printk(KERN_INFO
204                        "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
205                        tsk->comm, tsk->pid, str,
206                        regs->ip, regs->sp, error_code);
207                 print_vma_addr(" in ", regs->ip);
208                 printk("\n");
209         }
210 #endif
211
212         if (info)
213                 force_sig_info(signr, info, tsk);
214         else
215                 force_sig(signr, tsk);
216         return;
217
218 kernel_trap:
219         if (!fixup_exception(regs)) {
220                 tsk->thread.error_code = error_code;
221                 tsk->thread.trap_no = trapnr;
222                 die(str, regs, error_code);
223         }
224         return;
225
226 #ifdef CONFIG_X86_32
227 vm86_trap:
228         if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
229                                                 error_code, trapnr))
230                 goto trap_signal;
231         return;
232 #endif
233 }
234
235 #define DO_ERROR(trapnr, signr, str, name)                              \
236 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
237 {                                                                       \
238         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
239                                                         == NOTIFY_STOP) \
240                 return;                                                 \
241         conditional_sti(regs);                                          \
242         do_trap(trapnr, signr, str, regs, error_code, NULL);            \
243 }
244
245 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)         \
246 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
247 {                                                                       \
248         siginfo_t info;                                                 \
249         info.si_signo = signr;                                          \
250         info.si_errno = 0;                                              \
251         info.si_code = sicode;                                          \
252         info.si_addr = (void __user *)siaddr;                           \
253         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
254                                                         == NOTIFY_STOP) \
255                 return;                                                 \
256         conditional_sti(regs);                                          \
257         do_trap(trapnr, signr, str, regs, error_code, &info);           \
258 }
259
260 DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
261 DO_ERROR(4, SIGSEGV, "overflow", overflow)
262 DO_ERROR(5, SIGSEGV, "bounds", bounds)
263 DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
264 DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
265 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
266 DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
267 #ifdef CONFIG_X86_32
268 DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
269 #endif
270 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
271
272 #ifdef CONFIG_X86_64
273 /* Runs on IST stack */
274 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
275 {
276         if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
277                         12, SIGBUS) == NOTIFY_STOP)
278                 return;
279         preempt_conditional_sti(regs);
280         do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
281         preempt_conditional_cli(regs);
282 }
283
284 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
285 {
286         static const char str[] = "double fault";
287         struct task_struct *tsk = current;
288
289         /* Return not checked because double check cannot be ignored */
290         notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
291
292         tsk->thread.error_code = error_code;
293         tsk->thread.trap_no = 8;
294
295         /* This is always a kernel trap and never fixable (and thus must
296            never return). */
297         for (;;)
298                 die(str, regs, error_code);
299 }
300 #endif
301
302 dotraplinkage void __kprobes
303 do_general_protection(struct pt_regs *regs, long error_code)
304 {
305         struct task_struct *tsk;
306
307         conditional_sti(regs);
308
309 #ifdef CONFIG_X86_32
310         if (lazy_iobitmap_copy()) {
311                 /* restart the faulting instruction */
312                 return;
313         }
314
315         if (regs->flags & X86_VM_MASK)
316                 goto gp_in_vm86;
317 #endif
318
319         tsk = current;
320         if (!user_mode(regs))
321                 goto gp_in_kernel;
322
323         tsk->thread.error_code = error_code;
324         tsk->thread.trap_no = 13;
325
326         if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
327                         printk_ratelimit()) {
328                 printk(KERN_INFO
329                         "%s[%d] general protection ip:%lx sp:%lx error:%lx",
330                         tsk->comm, task_pid_nr(tsk),
331                         regs->ip, regs->sp, error_code);
332                 print_vma_addr(" in ", regs->ip);
333                 printk("\n");
334         }
335
336         force_sig(SIGSEGV, tsk);
337         return;
338
339 #ifdef CONFIG_X86_32
340 gp_in_vm86:
341         local_irq_enable();
342         handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
343         return;
344 #endif
345
346 gp_in_kernel:
347         if (fixup_exception(regs))
348                 return;
349
350         tsk->thread.error_code = error_code;
351         tsk->thread.trap_no = 13;
352         if (notify_die(DIE_GPF, "general protection fault", regs,
353                                 error_code, 13, SIGSEGV) == NOTIFY_STOP)
354                 return;
355         die("general protection fault", regs, error_code);
356 }
357
358 static notrace __kprobes void
359 mem_parity_error(unsigned char reason, struct pt_regs *regs)
360 {
361         printk(KERN_EMERG
362                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
363                         reason, smp_processor_id());
364
365         printk(KERN_EMERG
366                 "You have some hardware problem, likely on the PCI bus.\n");
367
368 #if defined(CONFIG_EDAC)
369         if (edac_handler_set()) {
370                 edac_atomic_assert_error();
371                 return;
372         }
373 #endif
374
375         if (panic_on_unrecovered_nmi)
376                 panic("NMI: Not continuing");
377
378         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
379
380         /* Clear and disable the memory parity error line. */
381         reason = (reason & 0xf) | 4;
382         outb(reason, 0x61);
383 }
384
385 static notrace __kprobes void
386 io_check_error(unsigned char reason, struct pt_regs *regs)
387 {
388         unsigned long i;
389
390         printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
391         show_registers(regs);
392
393         /* Re-enable the IOCK line, wait for a few seconds */
394         reason = (reason & 0xf) | 8;
395         outb(reason, 0x61);
396
397         i = 2000;
398         while (--i)
399                 udelay(1000);
400
401         reason &= ~8;
402         outb(reason, 0x61);
403 }
404
405 static notrace __kprobes void
406 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
407 {
408         if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
409                         NOTIFY_STOP)
410                 return;
411 #ifdef CONFIG_MCA
412         /*
413          * Might actually be able to figure out what the guilty party
414          * is:
415          */
416         if (MCA_bus) {
417                 mca_handle_nmi();
418                 return;
419         }
420 #endif
421         printk(KERN_EMERG
422                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
423                         reason, smp_processor_id());
424
425         printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
426         if (panic_on_unrecovered_nmi)
427                 panic("NMI: Not continuing");
428
429         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
430 }
431
432 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
433 {
434         unsigned char reason = 0;
435         int cpu;
436
437         cpu = smp_processor_id();
438
439         /* Only the BSP gets external NMIs from the system. */
440         if (!cpu)
441                 reason = get_nmi_reason();
442
443         if (!(reason & 0xc0)) {
444                 if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
445                                                                 == NOTIFY_STOP)
446                         return;
447 #ifdef CONFIG_X86_LOCAL_APIC
448                 /*
449                  * Ok, so this is none of the documented NMI sources,
450                  * so it must be the NMI watchdog.
451                  */
452                 if (nmi_watchdog_tick(regs, reason))
453                         return;
454                 if (!do_nmi_callback(regs, cpu))
455                         unknown_nmi_error(reason, regs);
456 #else
457                 unknown_nmi_error(reason, regs);
458 #endif
459
460                 return;
461         }
462         if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
463                 return;
464
465         /* AK: following checks seem to be broken on modern chipsets. FIXME */
466         if (reason & 0x80)
467                 mem_parity_error(reason, regs);
468         if (reason & 0x40)
469                 io_check_error(reason, regs);
470 #ifdef CONFIG_X86_32
471         /*
472          * Reassert NMI in case it became active meanwhile
473          * as it's edge-triggered:
474          */
475         reassert_nmi();
476 #endif
477 }
478
479 dotraplinkage notrace __kprobes void
480 do_nmi(struct pt_regs *regs, long error_code)
481 {
482         nmi_enter();
483
484 #ifdef CONFIG_X86_32
485         { int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); }
486 #else
487         add_pda(__nmi_count, 1);
488 #endif
489
490         if (!ignore_nmis)
491                 default_do_nmi(regs);
492
493         nmi_exit();
494 }
495
496 void stop_nmi(void)
497 {
498         acpi_nmi_disable();
499         ignore_nmis++;
500 }
501
502 void restart_nmi(void)
503 {
504         ignore_nmis--;
505         acpi_nmi_enable();
506 }
507
508 /* May run on IST stack. */
509 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
510 {
511 #ifdef CONFIG_KPROBES
512         if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
513                         == NOTIFY_STOP)
514                 return;
515 #else
516         if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
517                         == NOTIFY_STOP)
518                 return;
519 #endif
520
521         preempt_conditional_sti(regs);
522         do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
523         preempt_conditional_cli(regs);
524 }
525
526 #ifdef CONFIG_X86_64
527 /* Help handler running on IST stack to switch back to user stack
528    for scheduling or signal handling. The actual stack switch is done in
529    entry.S */
530 asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
531 {
532         struct pt_regs *regs = eregs;
533         /* Did already sync */
534         if (eregs == (struct pt_regs *)eregs->sp)
535                 ;
536         /* Exception from user space */
537         else if (user_mode(eregs))
538                 regs = task_pt_regs(current);
539         /* Exception from kernel and interrupts are enabled. Move to
540            kernel process stack. */
541         else if (eregs->flags & X86_EFLAGS_IF)
542                 regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
543         if (eregs != regs)
544                 *regs = *eregs;
545         return regs;
546 }
547 #endif
548
549 /*
550  * Our handling of the processor debug registers is non-trivial.
551  * We do not clear them on entry and exit from the kernel. Therefore
552  * it is possible to get a watchpoint trap here from inside the kernel.
553  * However, the code in ./ptrace.c has ensured that the user can
554  * only set watchpoints on userspace addresses. Therefore the in-kernel
555  * watchpoint trap can only occur in code which is reading/writing
556  * from user space. Such code must not hold kernel locks (since it
557  * can equally take a page fault), therefore it is safe to call
558  * force_sig_info even though that claims and releases locks.
559  *
560  * Code in ./signal.c ensures that the debug control register
561  * is restored before we deliver any signal, and therefore that
562  * user code runs with the correct debug control register even though
563  * we clear it here.
564  *
565  * Being careful here means that we don't have to be as careful in a
566  * lot of more complicated places (task switching can be a bit lazy
567  * about restoring all the debug state, and ptrace doesn't have to
568  * find every occurrence of the TF bit that could be saved away even
569  * by user code)
570  *
571  * May run on IST stack.
572  */
573 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
574 {
575         struct task_struct *tsk = current;
576         unsigned long condition;
577         int si_code;
578
579         get_debugreg(condition, 6);
580
581         /*
582          * The processor cleared BTF, so don't mark that we need it set.
583          */
584         clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
585         tsk->thread.debugctlmsr = 0;
586
587         if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
588                                                 SIGTRAP) == NOTIFY_STOP)
589                 return;
590
591         /* It's safe to allow irq's after DR6 has been saved */
592         preempt_conditional_sti(regs);
593
594         /* Mask out spurious debug traps due to lazy DR7 setting */
595         if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
596                 if (!tsk->thread.debugreg7)
597                         goto clear_dr7;
598         }
599
600 #ifdef CONFIG_X86_32
601         if (regs->flags & X86_VM_MASK)
602                 goto debug_vm86;
603 #endif
604
605         /* Save debug status register where ptrace can see it */
606         tsk->thread.debugreg6 = condition;
607
608         /*
609          * Single-stepping through TF: make sure we ignore any events in
610          * kernel space (but re-enable TF when returning to user mode).
611          */
612         if (condition & DR_STEP) {
613                 if (!user_mode(regs))
614                         goto clear_TF_reenable;
615         }
616
617         si_code = get_si_code(condition);
618         /* Ok, finally something we can handle */
619         send_sigtrap(tsk, regs, error_code, si_code);
620
621         /*
622          * Disable additional traps. They'll be re-enabled when
623          * the signal is delivered.
624          */
625 clear_dr7:
626         set_debugreg(0, 7);
627         preempt_conditional_cli(regs);
628         return;
629
630 #ifdef CONFIG_X86_32
631 debug_vm86:
632         handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
633         preempt_conditional_cli(regs);
634         return;
635 #endif
636
637 clear_TF_reenable:
638         set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
639         regs->flags &= ~X86_EFLAGS_TF;
640         preempt_conditional_cli(regs);
641         return;
642 }
643
644 #ifdef CONFIG_X86_64
645 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
646 {
647         if (fixup_exception(regs))
648                 return 1;
649
650         notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
651         /* Illegal floating point operation in the kernel */
652         current->thread.trap_no = trapnr;
653         die(str, regs, 0);
654         return 0;
655 }
656 #endif
657
658 /*
659  * Note that we play around with the 'TS' bit in an attempt to get
660  * the correct behaviour even in the presence of the asynchronous
661  * IRQ13 behaviour
662  */
663 void math_error(void __user *ip)
664 {
665         struct task_struct *task;
666         siginfo_t info;
667         unsigned short cwd, swd, err;
668
669         /*
670          * Save the info for the exception handler and clear the error.
671          */
672         task = current;
673         save_init_fpu(task);
674         task->thread.trap_no = 16;
675         task->thread.error_code = 0;
676         info.si_signo = SIGFPE;
677         info.si_errno = 0;
678         info.si_addr = ip;
679         /*
680          * (~cwd & swd) will mask out exceptions that are not set to unmasked
681          * status.  0x3f is the exception bits in these regs, 0x200 is the
682          * C1 reg you need in case of a stack fault, 0x040 is the stack
683          * fault bit.  We should only be taking one exception at a time,
684          * so if this combination doesn't produce any single exception,
685          * then we have a bad program that isn't synchronizing its FPU usage
686          * and it will suffer the consequences since we won't be able to
687          * fully reproduce the context of the exception
688          */
689         cwd = get_fpu_cwd(task);
690         swd = get_fpu_swd(task);
691
692         err = swd & ~cwd;
693
694         if (err & 0x001) {      /* Invalid op */
695                 /*
696                  * swd & 0x240 == 0x040: Stack Underflow
697                  * swd & 0x240 == 0x240: Stack Overflow
698                  * User must clear the SF bit (0x40) if set
699                  */
700                 info.si_code = FPE_FLTINV;
701         } else if (err & 0x004) { /* Divide by Zero */
702                 info.si_code = FPE_FLTDIV;
703         } else if (err & 0x008) { /* Overflow */
704                 info.si_code = FPE_FLTOVF;
705         } else if (err & 0x012) { /* Denormal, Underflow */
706                 info.si_code = FPE_FLTUND;
707         } else if (err & 0x020) { /* Precision */
708                 info.si_code = FPE_FLTRES;
709         } else {
710                 /* If we're using IRQ 13, or supposedly even some trap 16
711                    implementations, it's possible we get a spurious trap... */
712                 return;         /* Spurious trap, no error */
713         }
714         force_sig_info(SIGFPE, &info, task);
715 }
716
717 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
718 {
719         conditional_sti(regs);
720
721 #ifdef CONFIG_X86_32
722         ignore_fpu_irq = 1;
723 #else
724         if (!user_mode(regs) &&
725             kernel_math_error(regs, "kernel x87 math error", 16))
726                 return;
727 #endif
728
729         math_error((void __user *)regs->ip);
730 }
731
732 static void simd_math_error(void __user *ip)
733 {
734         struct task_struct *task;
735         siginfo_t info;
736         unsigned short mxcsr;
737
738         /*
739          * Save the info for the exception handler and clear the error.
740          */
741         task = current;
742         save_init_fpu(task);
743         task->thread.trap_no = 19;
744         task->thread.error_code = 0;
745         info.si_signo = SIGFPE;
746         info.si_errno = 0;
747         info.si_code = __SI_FAULT;
748         info.si_addr = ip;
749         /*
750          * The SIMD FPU exceptions are handled a little differently, as there
751          * is only a single status/control register.  Thus, to determine which
752          * unmasked exception was caught we must mask the exception mask bits
753          * at 0x1f80, and then use these to mask the exception bits at 0x3f.
754          */
755         mxcsr = get_fpu_mxcsr(task);
756         switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
757         case 0x000:
758         default:
759                 break;
760         case 0x001: /* Invalid Op */
761                 info.si_code = FPE_FLTINV;
762                 break;
763         case 0x002: /* Denormalize */
764         case 0x010: /* Underflow */
765                 info.si_code = FPE_FLTUND;
766                 break;
767         case 0x004: /* Zero Divide */
768                 info.si_code = FPE_FLTDIV;
769                 break;
770         case 0x008: /* Overflow */
771                 info.si_code = FPE_FLTOVF;
772                 break;
773         case 0x020: /* Precision */
774                 info.si_code = FPE_FLTRES;
775                 break;
776         }
777         force_sig_info(SIGFPE, &info, task);
778 }
779
780 dotraplinkage void
781 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
782 {
783         conditional_sti(regs);
784
785 #ifdef CONFIG_X86_32
786         if (cpu_has_xmm) {
787                 /* Handle SIMD FPU exceptions on PIII+ processors. */
788                 ignore_fpu_irq = 1;
789                 simd_math_error((void __user *)regs->ip);
790                 return;
791         }
792         /*
793          * Handle strange cache flush from user space exception
794          * in all other cases.  This is undocumented behaviour.
795          */
796         if (regs->flags & X86_VM_MASK) {
797                 handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
798                 return;
799         }
800         current->thread.trap_no = 19;
801         current->thread.error_code = error_code;
802         die_if_kernel("cache flush denied", regs, error_code);
803         force_sig(SIGSEGV, current);
804 #else
805         if (!user_mode(regs) &&
806                         kernel_math_error(regs, "kernel simd math error", 19))
807                 return;
808         simd_math_error((void __user *)regs->ip);
809 #endif
810 }
811
812 dotraplinkage void
813 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
814 {
815         conditional_sti(regs);
816 #if 0
817         /* No need to warn about this any longer. */
818         printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
819 #endif
820 }
821
822 #ifdef CONFIG_X86_32
823 unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
824 {
825         struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
826         unsigned long base = (kesp - uesp) & -THREAD_SIZE;
827         unsigned long new_kesp = kesp - base;
828         unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
829         __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
830
831         /* Set up base for espfix segment */
832         desc &= 0x00f0ff0000000000ULL;
833         desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
834                 ((((__u64)base) << 32) & 0xff00000000000000ULL) |
835                 ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
836                 (lim_pages & 0xffff);
837         *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
838
839         return new_kesp;
840 }
841 #else
842 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
843 {
844 }
845
846 asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
847 {
848 }
849 #endif
850
851 /*
852  * 'math_state_restore()' saves the current math information in the
853  * old math state array, and gets the new ones from the current task
854  *
855  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
856  * Don't touch unless you *really* know how it works.
857  *
858  * Must be called with kernel preemption disabled (in this case,
859  * local interrupts are disabled at the call-site in entry.S).
860  */
861 asmlinkage void math_state_restore(void)
862 {
863         struct thread_info *thread = current_thread_info();
864         struct task_struct *tsk = thread->task;
865
866         if (!tsk_used_math(tsk)) {
867                 local_irq_enable();
868                 /*
869                  * does a slab alloc which can sleep
870                  */
871                 if (init_fpu(tsk)) {
872                         /*
873                          * ran out of memory!
874                          */
875                         do_group_exit(SIGKILL);
876                         return;
877                 }
878                 local_irq_disable();
879         }
880
881         clts();                         /* Allow maths ops (or we recurse) */
882 #ifdef CONFIG_X86_32
883         restore_fpu(tsk);
884 #else
885         /*
886          * Paranoid restore. send a SIGSEGV if we fail to restore the state.
887          */
888         if (unlikely(restore_fpu_checking(tsk))) {
889                 stts();
890                 force_sig(SIGSEGV, tsk);
891                 return;
892         }
893 #endif
894         thread->status |= TS_USEDFPU;   /* So we fnsave on switch_to() */
895         tsk->fpu_counter++;
896 }
897 EXPORT_SYMBOL_GPL(math_state_restore);
898
899 #ifndef CONFIG_MATH_EMULATION
900 asmlinkage void math_emulate(long arg)
901 {
902         printk(KERN_EMERG
903                 "math-emulation not enabled and no coprocessor found.\n");
904         printk(KERN_EMERG "killing %s.\n", current->comm);
905         force_sig(SIGFPE, current);
906         schedule();
907 }
908 #endif /* CONFIG_MATH_EMULATION */
909
910 dotraplinkage void __kprobes
911 do_device_not_available(struct pt_regs *regs, long error)
912 {
913 #ifdef CONFIG_X86_32
914         if (read_cr0() & X86_CR0_EM) {
915                 conditional_sti(regs);
916                 math_emulate(0);
917         } else {
918                 math_state_restore(); /* interrupts still off */
919                 conditional_sti(regs);
920         }
921 #else
922         math_state_restore();
923 #endif
924 }
925
926 #ifdef CONFIG_X86_32
927 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
928 {
929         siginfo_t info;
930         local_irq_enable();
931
932         info.si_signo = SIGILL;
933         info.si_errno = 0;
934         info.si_code = ILL_BADSTK;
935         info.si_addr = 0;
936         if (notify_die(DIE_TRAP, "iret exception",
937                         regs, error_code, 32, SIGILL) == NOTIFY_STOP)
938                 return;
939         do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
940 }
941 #endif
942
943 void __init trap_init(void)
944 {
945 #ifdef CONFIG_X86_32
946         int i;
947 #endif
948
949 #ifdef CONFIG_EISA
950         void __iomem *p = early_ioremap(0x0FFFD9, 4);
951
952         if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
953                 EISA_bus = 1;
954         early_iounmap(p, 4);
955 #endif
956
957         set_intr_gate(0, &divide_error);
958         set_intr_gate_ist(1, &debug, DEBUG_STACK);
959         set_intr_gate_ist(2, &nmi, NMI_STACK);
960         /* int3 can be called from all */
961         set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
962         /* int4 can be called from all */
963         set_system_intr_gate(4, &overflow);
964         set_intr_gate(5, &bounds);
965         set_intr_gate(6, &invalid_op);
966         set_intr_gate(7, &device_not_available);
967 #ifdef CONFIG_X86_32
968         set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
969 #else
970         set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
971 #endif
972         set_intr_gate(9, &coprocessor_segment_overrun);
973         set_intr_gate(10, &invalid_TSS);
974         set_intr_gate(11, &segment_not_present);
975         set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
976         set_intr_gate(13, &general_protection);
977         set_intr_gate(14, &page_fault);
978         set_intr_gate(15, &spurious_interrupt_bug);
979         set_intr_gate(16, &coprocessor_error);
980         set_intr_gate(17, &alignment_check);
981 #ifdef CONFIG_X86_MCE
982         set_intr_gate_ist(18, &machine_check, MCE_STACK);
983 #endif
984         set_intr_gate(19, &simd_coprocessor_error);
985
986 #ifdef CONFIG_IA32_EMULATION
987         set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
988 #endif
989
990 #ifdef CONFIG_X86_32
991         if (cpu_has_fxsr) {
992                 printk(KERN_INFO "Enabling fast FPU save and restore... ");
993                 set_in_cr4(X86_CR4_OSFXSR);
994                 printk("done.\n");
995         }
996         if (cpu_has_xmm) {
997                 printk(KERN_INFO
998                         "Enabling unmasked SIMD FPU exception support... ");
999                 set_in_cr4(X86_CR4_OSXMMEXCPT);
1000                 printk("done.\n");
1001         }
1002
1003         set_system_trap_gate(SYSCALL_VECTOR, &system_call);
1004
1005         /* Reserve all the builtin and the syscall vector: */
1006         for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
1007                 set_bit(i, used_vectors);
1008
1009         set_bit(SYSCALL_VECTOR, used_vectors);
1010 #endif
1011         /*
1012          * Should be a barrier for any external CPU state:
1013          */
1014         cpu_init();
1015
1016 #ifdef CONFIG_X86_32
1017         trap_init_hook();
1018 #endif
1019 }