[safe/jmp/linux-2.6] / arch / x86 / kernel / numaq_32.c

/*
 * Written by: Patricia Gaughen, IBM Corporation
 *
 * Copyright (C) 2002, IBM Corp.
 * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
 *
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 * NON INFRINGEMENT.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Send feedback to <gone@us.ibm.com>
 */
#include <linux/nodemask.h>
#include <linux/topology.h>
#include <linux/bootmem.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/numa.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/mm.h>

#include <asm/processor.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/numaq.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/ipi.h>

#define MB_TO_PAGES(addr)               ((addr) << (20 - PAGE_SHIFT))

int found_numaq;

/*
 * Have to match translation table entries to main table entries by counter
 * hence the mpc_record variable .... can't see a less disgusting way of
 * doing this ....
 */
struct mpc_trans {
        unsigned char                   mpc_type;
        unsigned char                   trans_len;
        unsigned char                   trans_type;
        unsigned char                   trans_quad;
        unsigned char                   trans_global;
        unsigned char                   trans_local;
        unsigned short                  trans_reserved;
};

/* x86_quirks member */
static int                              mpc_record;

static __cpuinitdata struct mpc_trans   *translation_table[MAX_MPC_ENTRY];

int                                     mp_bus_id_to_node[MAX_MP_BUSSES];
int                                     mp_bus_id_to_local[MAX_MP_BUSSES];
int                                     quad_local_to_mp_bus_id[NR_CPUS/4][4];


static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
{
        struct eachquadmem *eq = scd->eq + node;

        node_set_online(node);

        /* Convert to pages */
        node_start_pfn[node] =
                 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);

        node_end_pfn[node] =
                 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);

        e820_register_active_regions(node, node_start_pfn[node],
                                                node_end_pfn[node]);

        memory_present(node, node_start_pfn[node], node_end_pfn[node]);

        node_remap_size[node] = node_memmap_size_bytes(node,
                                        node_start_pfn[node],
                                        node_end_pfn[node]);
}

/*
 * Function: smp_dump_qct()
 *
 * Description: gets memory layout from the quad config table.  This
 * function also updates node_online_map with the nodes (quads) present.
 */
static void __init smp_dump_qct(void)
{
        struct sys_cfg_data *scd;
        int node;

        scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);

        nodes_clear(node_online_map);
        for_each_node(node) {
                if (scd->quads_present31_0 & (1 << node))
                        numaq_register_node(node, scd);
        }
}

void __cpuinit numaq_tsc_disable(void)
{
        if (!found_numaq)
                return;

        if (num_online_nodes() > 1) {
                printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
                setup_clear_cpu_cap(X86_FEATURE_TSC);
        }
}

static int __init numaq_pre_time_init(void)
{
        numaq_tsc_disable();
        return 0;
}

static inline int generate_logical_apicid(int quad, int phys_apicid)
{
        return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
}

/* x86_quirks member */
static int mpc_apic_id(struct mpc_cpu *m)
{
        int quad = translation_table[mpc_record]->trans_quad;
        int logical_apicid = generate_logical_apicid(quad, m->apicid);

        printk(KERN_DEBUG
                "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
                 m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
                (m->cpufeature & CPU_MODEL_MASK) >> 4,
                 m->apicver, quad, logical_apicid);

        return logical_apicid;
}

/* x86_quirks member */
static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
{
        int quad = translation_table[mpc_record]->trans_quad;
        int local = translation_table[mpc_record]->trans_local;

        mp_bus_id_to_node[m->busid] = quad;
        mp_bus_id_to_local[m->busid] = local;

        printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
}

/* x86_quirks member */
static void mpc_oem_pci_bus(struct mpc_bus *m)
{
        int quad = translation_table[mpc_record]->trans_quad;
        int local = translation_table[mpc_record]->trans_local;

        quad_local_to_mp_bus_id[quad][local] = m->busid;
}

static void __init MP_translation_info(struct mpc_trans *m)
{
        printk(KERN_INFO
            "Translation: record %d, type %d, quad %d, global %d, local %d\n",
               mpc_record, m->trans_type, m->trans_quad, m->trans_global,
               m->trans_local);

        if (mpc_record >= MAX_MPC_ENTRY)
                printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
        else
                translation_table[mpc_record] = m; /* stash this for later */

        if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
                node_set_online(m->trans_quad);
}

static int __init mpf_checksum(unsigned char *mp, int len)
{
        int sum = 0;

        while (len--)
                sum += *mp++;

        return sum & 0xFF;
}

/*
 * Read/parse the MPC oem tables
 */
static void __init
 smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
{
        int count = sizeof(*oemtable);  /* the header size */
        unsigned char *oemptr = ((unsigned char *)oemtable) + count;

        mpc_record = 0;
        printk(KERN_INFO
                "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);

        if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
                printk(KERN_WARNING
                       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
                       oemtable->signature[0], oemtable->signature[1],
                       oemtable->signature[2], oemtable->signature[3]);
                return;
        }

        if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
                printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
                return;
        }

        while (count < oemtable->length) {
                switch (*oemptr) {
                case MP_TRANSLATION:
                        {
                                struct mpc_trans *m = (void *)oemptr;

                                MP_translation_info(m);
                                oemptr += sizeof(*m);
                                count += sizeof(*m);
                                ++mpc_record;
                                break;
                        }
                default:
                        printk(KERN_WARNING
                               "Unrecognised OEM table entry type! - %d\n",
                               (int)*oemptr);
                        return;
                }
        }
}

static int __init numaq_setup_ioapic_ids(void)
{
        /* so can skip it */
        return 1;
}

static int __init numaq_update_genapic(void)
{
        apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;

        return 0;
}

static struct x86_quirks numaq_x86_quirks __initdata = {
        .arch_pre_time_init             = numaq_pre_time_init,
        .arch_time_init                 = NULL,
        .arch_pre_intr_init             = NULL,
        .arch_memory_setup              = NULL,
        .arch_intr_init                 = NULL,
        .arch_trap_init                 = NULL,
        .mach_get_smp_config            = NULL,
        .mach_find_smp_config           = NULL,
        .mpc_record                     = &mpc_record,
        .mpc_apic_id                    = mpc_apic_id,
        .mpc_oem_bus_info               = mpc_oem_bus_info,
        .mpc_oem_pci_bus                = mpc_oem_pci_bus,
        .smp_read_mpc_oem               = smp_read_mpc_oem,
        .setup_ioapic_ids               = numaq_setup_ioapic_ids,
        .update_genapic                 = numaq_update_genapic,
};

static __init void early_check_numaq(void)
{
        /*
         * Find possible boot-time SMP configuration:
         */
        early_find_smp_config();

        /*
         * get boot-time SMP configuration:
         */
        if (smp_found_config)
                early_get_smp_config();

        if (found_numaq)
                x86_quirks = &numaq_x86_quirks;
}

int __init get_memcfg_numaq(void)
{
        early_check_numaq();
        if (!found_numaq)
                return 0;
        smp_dump_qct();

        return 1;
}

#define NUMAQ_APIC_DFR_VALUE    (APIC_DFR_CLUSTER)

static inline unsigned int numaq_get_apic_id(unsigned long x)
{
        return (x >> 24) & 0x0F;
}

static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
{
        default_send_IPI_mask_sequence_logical(mask, vector);
}

static inline void numaq_send_IPI_allbutself(int vector)
{
        default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
}

static inline void numaq_send_IPI_all(int vector)
{
        numaq_send_IPI_mask(cpu_online_mask, vector);
}

#define NUMAQ_TRAMPOLINE_PHYS_LOW       (0x8)
#define NUMAQ_TRAMPOLINE_PHYS_HIGH      (0xa)

/*
 * Because we use NMIs rather than the INIT-STARTUP sequence to
 * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
 */
static inline void numaq_smp_callin_clear_local_apic(void)
{
        clear_local_APIC();
}

static inline const cpumask_t *numaq_target_cpus(void)
{
        return &CPU_MASK_ALL;
}

static inline unsigned long
numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
{
        return physid_isset(apicid, bitmap);
}

static inline unsigned long numaq_check_apicid_present(int bit)
{
        return physid_isset(bit, phys_cpu_present_map);
}

static inline int numaq_apic_id_registered(void)
{
        return 1;
}

static inline void numaq_init_apic_ldr(void)
{
        /* Already done in NUMA-Q firmware */
}

static inline void numaq_setup_apic_routing(void)
{
        printk(KERN_INFO
                "Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
                nr_ioapics);
}

/*
 * Skip adding the timer int on secondary nodes, which causes
 * a small but painful rift in the time-space continuum.
 */
static inline int numaq_multi_timer_check(int apic, int irq)
{
        return apic != 0 && irq == 0;
}

static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
{
        /* We don't have a good way to do this yet - hack */
        return physids_promote(0xFUL);
}

static inline int numaq_cpu_to_logical_apicid(int cpu)
{
        if (cpu >= nr_cpu_ids)
                return BAD_APICID;
        return cpu_2_logical_apicid[cpu];
}

/*
 * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
 * cpu to APIC ID relation to properly interact with the intelligent
 * mode of the cluster controller.
 */
static inline int numaq_cpu_present_to_apicid(int mps_cpu)
{
        if (mps_cpu < 60)
                return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
        else
                return BAD_APICID;
}

static inline int numaq_apicid_to_node(int logical_apicid)
{
        return logical_apicid >> 4;
}

static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
{
        int node = numaq_apicid_to_node(logical_apicid);
        int cpu = __ffs(logical_apicid & 0xf);

        return physid_mask_of_physid(cpu + 4*node);
}

/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;

static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
{
        return 1;
}

/*
 * We use physical apicids here, not logical, so just return the default
 * physical broadcast to stop people from breaking us
 */
static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
{
        return 0x0F;
}

static inline unsigned int
numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
                             const struct cpumask *andmask)
{
        return 0x0F;
}

/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
{
        return cpuid_apic >> index_msb;
}

static int
numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
        if (strncmp(oem, "IBM NUMA", 8))
                printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
        else
                found_numaq = 1;

        return found_numaq;
}

static int probe_numaq(void)
{
        /* already know from get_memcfg_numaq() */
        return found_numaq;
}

static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
{
        /* Careful. Some cpus do not strictly honor the set of cpus
         * specified in the interrupt destination when using lowest
         * priority interrupt delivery mode.
         *
         * In particular there was a hyperthreading cpu observed to
         * deliver interrupts to the wrong hyperthread when only one
         * hyperthread was specified in the interrupt desitination.
         */
        *retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
}

static void numaq_setup_portio_remap(void)
{
        int num_quads = num_online_nodes();

        if (num_quads <= 1)
                return;

        printk(KERN_INFO
                "Remapping cross-quad port I/O for %d quads\n", num_quads);

        xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);

        printk(KERN_INFO
                "xquad_portio vaddr 0x%08lx, len %08lx\n",
                (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}

struct genapic apic_numaq = {

        .name                           = "NUMAQ",
        .probe                          = probe_numaq,
        .acpi_madt_oem_check            = NULL,
        .apic_id_registered             = numaq_apic_id_registered,

        .irq_delivery_mode              = dest_LowestPrio,
        /* physical delivery on LOCAL quad: */
        .irq_dest_mode                  = 0,

        .target_cpus                    = numaq_target_cpus,
        .disable_esr                    = 1,
        .dest_logical                   = APIC_DEST_LOGICAL,
        .check_apicid_used              = numaq_check_apicid_used,
        .check_apicid_present           = numaq_check_apicid_present,

        .vector_allocation_domain       = numaq_vector_allocation_domain,
        .init_apic_ldr                  = numaq_init_apic_ldr,

        .ioapic_phys_id_map             = numaq_ioapic_phys_id_map,
        .setup_apic_routing             = numaq_setup_apic_routing,
        .multi_timer_check              = numaq_multi_timer_check,
        .apicid_to_node                 = numaq_apicid_to_node,
        .cpu_to_logical_apicid          = numaq_cpu_to_logical_apicid,
        .cpu_present_to_apicid          = numaq_cpu_present_to_apicid,
        .apicid_to_cpu_present          = numaq_apicid_to_cpu_present,
        .setup_portio_remap             = numaq_setup_portio_remap,
        .check_phys_apicid_present      = numaq_check_phys_apicid_present,
        .enable_apic_mode               = NULL,
        .phys_pkg_id                    = numaq_phys_pkg_id,
        .mps_oem_check                  = numaq_mps_oem_check,

        .get_apic_id                    = numaq_get_apic_id,
        .set_apic_id                    = NULL,
        .apic_id_mask                   = 0x0F << 24,

        .cpu_mask_to_apicid             = numaq_cpu_mask_to_apicid,
        .cpu_mask_to_apicid_and         = numaq_cpu_mask_to_apicid_and,

        .send_IPI_mask                  = numaq_send_IPI_mask,
        .send_IPI_mask_allbutself       = NULL,
        .send_IPI_allbutself            = numaq_send_IPI_allbutself,
        .send_IPI_all                   = numaq_send_IPI_all,
        .send_IPI_self                  = default_send_IPI_self,

        .wakeup_cpu                     = NULL,
        .trampoline_phys_low            = NUMAQ_TRAMPOLINE_PHYS_LOW,
        .trampoline_phys_high           = NUMAQ_TRAMPOLINE_PHYS_HIGH,

        /* We don't do anything here because we use NMI's to boot instead */
        .wait_for_init_deassert         = NULL,

        .smp_callin_clear_local_apic    = numaq_smp_callin_clear_local_apic,
        .inquire_remote_apic            = NULL,

        .read                           = native_apic_mem_read,
        .write                          = native_apic_mem_write,
        .icr_read                       = native_apic_icr_read,
        .icr_write                      = native_apic_icr_write,
        .wait_icr_idle                  = native_apic_wait_icr_idle,
        .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
};