SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/x86/kernel/apic/numaq_32.c

   1 /*
   2  * Written by: Patricia Gaughen, IBM Corporation
   3  *
   4  * Copyright (C) 2002, IBM Corp.
   5  * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
   6  *
   7  * All rights reserved.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  17  * NON INFRINGEMENT.  See the GNU General Public License for more
  18  * details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  * Send feedback to <gone@us.ibm.com>
  25  */
  26 #include <linux/nodemask.h>
  27 #include <linux/topology.h>
  28 #include <linux/bootmem.h>
  29 #include <linux/threads.h>
  30 #include <linux/cpumask.h>
  31 #include <linux/kernel.h>
  32 #include <linux/mmzone.h>
  33 #include <linux/module.h>
  34 #include <linux/string.h>
  35 #include <linux/init.h>
  36 #include <linux/numa.h>
  37 #include <linux/smp.h>
  38 #include <linux/io.h>
  39 #include <linux/mm.h>
  40
  41 #include <asm/processor.h>
  42 #include <asm/fixmap.h>
  43 #include <asm/mpspec.h>
  44 #include <asm/numaq.h>
  45 #include <asm/setup.h>
  46 #include <asm/apic.h>
  47 #include <asm/e820.h>
  48 #include <asm/ipi.h>
  49
  50 #define MB_TO_PAGES(addr)               ((addr) << (20 - PAGE_SHIFT))
  51
  52 int found_numaq;
  53
  54 /*
  55  * Have to match translation table entries to main table entries by counter
  56  * hence the mpc_record variable .... can't see a less disgusting way of
  57  * doing this ....
  58  */
  59 struct mpc_trans {
  60         unsigned char                   mpc_type;
  61         unsigned char                   trans_len;
  62         unsigned char                   trans_type;
  63         unsigned char                   trans_quad;
  64         unsigned char                   trans_global;
  65         unsigned char                   trans_local;
  66         unsigned short                  trans_reserved;
  67 };
  68
  69 static int                              mpc_record;
  70
  71 static struct mpc_trans                 *translation_table[MAX_MPC_ENTRY];
  72
  73 int                                     mp_bus_id_to_node[MAX_MP_BUSSES];
  74 int                                     mp_bus_id_to_local[MAX_MP_BUSSES];
  75 int                                     quad_local_to_mp_bus_id[NR_CPUS/4][4];
  76
  77
  78 static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
  79 {
  80         struct eachquadmem *eq = scd->eq + node;
  81
  82         node_set_online(node);
  83
  84         /* Convert to pages */
  85         node_start_pfn[node] =
  86                  MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
  87
  88         node_end_pfn[node] =
  89                  MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
  90
  91         e820_register_active_regions(node, node_start_pfn[node],
  92                                                 node_end_pfn[node]);
  93
  94         memory_present(node, node_start_pfn[node], node_end_pfn[node]);
  95
  96         node_remap_size[node] = node_memmap_size_bytes(node,
  97                                         node_start_pfn[node],
  98                                         node_end_pfn[node]);
  99 }
 100
 101 /*
 102  * Function: smp_dump_qct()
 103  *
 104  * Description: gets memory layout from the quad config table.  This
 105  * function also updates node_online_map with the nodes (quads) present.
 106  */
 107 static void __init smp_dump_qct(void)
 108 {
 109         struct sys_cfg_data *scd;
 110         int node;
 111
 112         scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
 113
 114         nodes_clear(node_online_map);
 115         for_each_node(node) {
 116                 if (scd->quads_present31_0 & (1 << node))
 117                         numaq_register_node(node, scd);
 118         }
 119 }
 120
 121 void __cpuinit numaq_tsc_disable(void)
 122 {
 123         if (!found_numaq)
 124                 return;
 125
 126         if (num_online_nodes() > 1) {
 127                 printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
 128                 setup_clear_cpu_cap(X86_FEATURE_TSC);
 129         }
 130 }
 131
 132 static void __init numaq_tsc_init(void)
 133 {
 134         numaq_tsc_disable();
 135 }
 136
 137 static inline int generate_logical_apicid(int quad, int phys_apicid)
 138 {
 139         return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
 140 }
 141
 142 /* x86_quirks member */
 143 static int mpc_apic_id(struct mpc_cpu *m)
 144 {
 145         int quad = translation_table[mpc_record]->trans_quad;
 146         int logical_apicid = generate_logical_apicid(quad, m->apicid);
 147
 148         printk(KERN_DEBUG
 149                 "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
 150                  m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
 151                 (m->cpufeature & CPU_MODEL_MASK) >> 4,
 152                  m->apicver, quad, logical_apicid);
 153
 154         return logical_apicid;
 155 }
 156
 157 /* x86_quirks member */
 158 static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
 159 {
 160         int quad = translation_table[mpc_record]->trans_quad;
 161         int local = translation_table[mpc_record]->trans_local;
 162
 163         mp_bus_id_to_node[m->busid] = quad;
 164         mp_bus_id_to_local[m->busid] = local;
 165
 166         printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
 167 }
 168
 169 /* x86_quirks member */
 170 static void mpc_oem_pci_bus(struct mpc_bus *m)
 171 {
 172         int quad = translation_table[mpc_record]->trans_quad;
 173         int local = translation_table[mpc_record]->trans_local;
 174
 175         quad_local_to_mp_bus_id[quad][local] = m->busid;
 176 }
 177
 178 /*
 179  * Called from mpparse code.
 180  * mode = 0: prescan
 181  * mode = 1: one mpc entry scanned
 182  */
 183 static void numaq_mpc_record(unsigned int mode)
 184 {
 185         if (!mode)
 186                 mpc_record = 0;
 187         else
 188                 mpc_record++;
 189 }
 190
 191 static void __init MP_translation_info(struct mpc_trans *m)
 192 {
 193         printk(KERN_INFO
 194             "Translation: record %d, type %d, quad %d, global %d, local %d\n",
 195                mpc_record, m->trans_type, m->trans_quad, m->trans_global,
 196                m->trans_local);
 197
 198         if (mpc_record >= MAX_MPC_ENTRY)
 199                 printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
 200         else
 201                 translation_table[mpc_record] = m; /* stash this for later */
 202
 203         if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
 204                 node_set_online(m->trans_quad);
 205 }
 206
 207 static int __init mpf_checksum(unsigned char *mp, int len)
 208 {
 209         int sum = 0;
 210
 211         while (len--)
 212                 sum += *mp++;
 213
 214         return sum & 0xFF;
 215 }
 216
 217 /*
 218  * Read/parse the MPC oem tables
 219  */
 220 static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 221 {
 222         struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
 223         int count = sizeof(*oemtable);  /* the header size */
 224         unsigned char *oemptr = ((unsigned char *)oemtable) + count;
 225
 226         mpc_record = 0;
 227         printk(KERN_INFO
 228                 "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
 229
 230         if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
 231                 printk(KERN_WARNING
 232                        "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
 233                        oemtable->signature[0], oemtable->signature[1],
 234                        oemtable->signature[2], oemtable->signature[3]);
 235                 return;
 236         }
 237
 238         if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
 239                 printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
 240                 return;
 241         }
 242
 243         while (count < oemtable->length) {
 244                 switch (*oemptr) {
 245                 case MP_TRANSLATION:
 246                         {
 247                                 struct mpc_trans *m = (void *)oemptr;
 248
 249                                 MP_translation_info(m);
 250                                 oemptr += sizeof(*m);
 251                                 count += sizeof(*m);
 252                                 ++mpc_record;
 253                                 break;
 254                         }
 255                 default:
 256                         printk(KERN_WARNING
 257                                "Unrecognised OEM table entry type! - %d\n",
 258                                (int)*oemptr);
 259                         return;
 260                 }
 261         }
 262 }
 263
 264 static __init void early_check_numaq(void)
 265 {
 266         /*
 267          * get boot-time SMP configuration:
 268          */
 269         if (smp_found_config)
 270                 early_get_smp_config();
 271
 272         if (found_numaq) {
 273                 x86_init.mpparse.mpc_record = numaq_mpc_record;
 274                 x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 275                 x86_init.mpparse.mpc_apic_id = mpc_apic_id;
 276                 x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
 277                 x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
 278                 x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
 279                 x86_init.timers.tsc_pre_init = numaq_tsc_init;
 280         }
 281 }
 282
 283 int __init get_memcfg_numaq(void)
 284 {
 285         early_check_numaq();
 286         if (!found_numaq)
 287                 return 0;
 288         smp_dump_qct();
 289
 290         return 1;
 291 }
 292
 293 #define NUMAQ_APIC_DFR_VALUE    (APIC_DFR_CLUSTER)
 294
 295 static inline unsigned int numaq_get_apic_id(unsigned long x)
 296 {
 297         return (x >> 24) & 0x0F;
 298 }
 299
 300 static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
 301 {
 302         default_send_IPI_mask_sequence_logical(mask, vector);
 303 }
 304
 305 static inline void numaq_send_IPI_allbutself(int vector)
 306 {
 307         default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
 308 }
 309
 310 static inline void numaq_send_IPI_all(int vector)
 311 {
 312         numaq_send_IPI_mask(cpu_online_mask, vector);
 313 }
 314
 315 #define NUMAQ_TRAMPOLINE_PHYS_LOW       (0x8)
 316 #define NUMAQ_TRAMPOLINE_PHYS_HIGH      (0xa)
 317
 318 /*
 319  * Because we use NMIs rather than the INIT-STARTUP sequence to
 320  * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
 321  */
 322 static inline void numaq_smp_callin_clear_local_apic(void)
 323 {
 324         clear_local_APIC();
 325 }
 326
 327 static inline const struct cpumask *numaq_target_cpus(void)
 328 {
 329         return cpu_all_mask;
 330 }
 331
 332 static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
 333 {
 334         return physid_isset(apicid, *map);
 335 }
 336
 337 static inline unsigned long numaq_check_apicid_present(int bit)
 338 {
 339         return physid_isset(bit, phys_cpu_present_map);
 340 }
 341
 342 static inline int numaq_apic_id_registered(void)
 343 {
 344         return 1;
 345 }
 346
 347 static inline void numaq_init_apic_ldr(void)
 348 {
 349         /* Already done in NUMA-Q firmware */
 350 }
 351
 352 static inline void numaq_setup_apic_routing(void)
 353 {
 354         printk(KERN_INFO
 355                 "Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
 356                 nr_ioapics);
 357 }
 358
 359 /*
 360  * Skip adding the timer int on secondary nodes, which causes
 361  * a small but painful rift in the time-space continuum.
 362  */
 363 static inline int numaq_multi_timer_check(int apic, int irq)
 364 {
 365         return apic != 0 && irq == 0;
 366 }
 367
 368 static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 369 {
 370         /* We don't have a good way to do this yet - hack */
 371         return physids_promote(0xFUL, retmap);
 372 }
 373
 374 static inline int numaq_cpu_to_logical_apicid(int cpu)
 375 {
 376         if (cpu >= nr_cpu_ids)
 377                 return BAD_APICID;
 378         return cpu_2_logical_apicid[cpu];
 379 }
 380
 381 /*
 382  * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
 383  * cpu to APIC ID relation to properly interact with the intelligent
 384  * mode of the cluster controller.
 385  */
 386 static inline int numaq_cpu_present_to_apicid(int mps_cpu)
 387 {
 388         if (mps_cpu < 60)
 389                 return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
 390         else
 391                 return BAD_APICID;
 392 }
 393
 394 static inline int numaq_apicid_to_node(int logical_apicid)
 395 {
 396         return logical_apicid >> 4;
 397 }
 398
 399 static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
 400 {
 401         int node = numaq_apicid_to_node(logical_apicid);
 402         int cpu = __ffs(logical_apicid & 0xf);
 403
 404         physid_set_mask_of_physid(cpu + 4*node, retmap);
 405 }
 406
 407 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 408 void *xquad_portio;
 409
 410 static inline int numaq_check_phys_apicid_present(int phys_apicid)
 411 {
 412         return 1;
 413 }
 414
 415 /*
 416  * We use physical apicids here, not logical, so just return the default
 417  * physical broadcast to stop people from breaking us
 418  */
 419 static unsigned int numaq_cpu_mask_to_apicid(const struct cpumask *cpumask)
 420 {
 421         return 0x0F;
 422 }
 423
 424 static inline unsigned int
 425 numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 426                              const struct cpumask *andmask)
 427 {
 428         return 0x0F;
 429 }
 430
 431 /* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
 432 static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
 433 {
 434         return cpuid_apic >> index_msb;
 435 }
 436
 437 static int
 438 numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 439 {
 440         if (strncmp(oem, "IBM NUMA", 8))
 441                 printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
 442         else
 443                 found_numaq = 1;
 444
 445         return found_numaq;
 446 }
 447
 448 static int probe_numaq(void)
 449 {
 450         /* already know from get_memcfg_numaq() */
 451         return found_numaq;
 452 }
 453
 454 static void numaq_vector_allocation_domain(int cpu, struct cpumask *retmask)
 455 {
 456         /* Careful. Some cpus do not strictly honor the set of cpus
 457          * specified in the interrupt destination when using lowest
 458          * priority interrupt delivery mode.
 459          *
 460          * In particular there was a hyperthreading cpu observed to
 461          * deliver interrupts to the wrong hyperthread when only one
 462          * hyperthread was specified in the interrupt desitination.
 463          */
 464         cpumask_clear(retmask);
 465         cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
 466 }
 467
 468 static void numaq_setup_portio_remap(void)
 469 {
 470         int num_quads = num_online_nodes();
 471
 472         if (num_quads <= 1)
 473                 return;
 474
 475         printk(KERN_INFO
 476                 "Remapping cross-quad port I/O for %d quads\n", num_quads);
 477
 478         xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
 479
 480         printk(KERN_INFO
 481                 "xquad_portio vaddr 0x%08lx, len %08lx\n",
 482                 (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 483 }
 484
 485 /* Use __refdata to keep false positive warning calm.   */
 486 struct apic __refdata apic_numaq = {
 487
 488         .name                           = "NUMAQ",
 489         .probe                          = probe_numaq,
 490         .acpi_madt_oem_check            = NULL,
 491         .apic_id_registered             = numaq_apic_id_registered,
 492
 493         .irq_delivery_mode              = dest_LowestPrio,
 494         /* physical delivery on LOCAL quad: */
 495         .irq_dest_mode                  = 0,
 496
 497         .target_cpus                    = numaq_target_cpus,
 498         .disable_esr                    = 1,
 499         .dest_logical                   = APIC_DEST_LOGICAL,
 500         .check_apicid_used              = numaq_check_apicid_used,
 501         .check_apicid_present           = numaq_check_apicid_present,
 502
 503         .vector_allocation_domain       = numaq_vector_allocation_domain,
 504         .init_apic_ldr                  = numaq_init_apic_ldr,
 505
 506         .ioapic_phys_id_map             = numaq_ioapic_phys_id_map,
 507         .setup_apic_routing             = numaq_setup_apic_routing,
 508         .multi_timer_check              = numaq_multi_timer_check,
 509         .apicid_to_node                 = numaq_apicid_to_node,
 510         .cpu_to_logical_apicid          = numaq_cpu_to_logical_apicid,
 511         .cpu_present_to_apicid          = numaq_cpu_present_to_apicid,
 512         .apicid_to_cpu_present          = numaq_apicid_to_cpu_present,
 513         .setup_portio_remap             = numaq_setup_portio_remap,
 514         .check_phys_apicid_present      = numaq_check_phys_apicid_present,
 515         .enable_apic_mode               = NULL,
 516         .phys_pkg_id                    = numaq_phys_pkg_id,
 517         .mps_oem_check                  = numaq_mps_oem_check,
 518
 519         .get_apic_id                    = numaq_get_apic_id,
 520         .set_apic_id                    = NULL,
 521         .apic_id_mask                   = 0x0F << 24,
 522
 523         .cpu_mask_to_apicid             = numaq_cpu_mask_to_apicid,
 524         .cpu_mask_to_apicid_and         = numaq_cpu_mask_to_apicid_and,
 525
 526         .send_IPI_mask                  = numaq_send_IPI_mask,
 527         .send_IPI_mask_allbutself       = NULL,
 528         .send_IPI_allbutself            = numaq_send_IPI_allbutself,
 529         .send_IPI_all                   = numaq_send_IPI_all,
 530         .send_IPI_self                  = default_send_IPI_self,
 531
 532         .wakeup_secondary_cpu           = wakeup_secondary_cpu_via_nmi,
 533         .trampoline_phys_low            = NUMAQ_TRAMPOLINE_PHYS_LOW,
 534         .trampoline_phys_high           = NUMAQ_TRAMPOLINE_PHYS_HIGH,
 535
 536         /* We don't do anything here because we use NMI's to boot instead */
 537         .wait_for_init_deassert         = NULL,
 538
 539         .smp_callin_clear_local_apic    = numaq_smp_callin_clear_local_apic,
 540         .inquire_remote_apic            = NULL,
 541
 542         .read                           = native_apic_mem_read,
 543         .write                          = native_apic_mem_write,
 544         .icr_read                       = native_apic_icr_read,
 545         .icr_write                      = native_apic_icr_write,
 546         .wait_icr_idle                  = native_apic_wait_icr_idle,
 547         .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
 548 };