[SPARC64]: Convert to use generic exception table support.
[safe/jmp/linux-2.6] / arch / sparc64 / mm / fault.c
1 /* $Id: fault.c,v 1.59 2002/02/09 19:49:31 davem Exp $
2  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
3  *
4  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
5  * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
6  */
7
8 #include <asm/head.h>
9
10 #include <linux/string.h>
11 #include <linux/types.h>
12 #include <linux/sched.h>
13 #include <linux/ptrace.h>
14 #include <linux/mman.h>
15 #include <linux/signal.h>
16 #include <linux/mm.h>
17 #include <linux/module.h>
18 #include <linux/smp_lock.h>
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/kprobes.h>
22
23 #include <asm/page.h>
24 #include <asm/pgtable.h>
25 #include <asm/openprom.h>
26 #include <asm/oplib.h>
27 #include <asm/uaccess.h>
28 #include <asm/asi.h>
29 #include <asm/lsu.h>
30 #include <asm/sections.h>
31 #include <asm/kdebug.h>
32
33 #define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0]))
34
35 extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS];
36
37 /*
38  * To debug kernel to catch accesses to certain virtual/physical addresses.
39  * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints.
40  * flags = VM_READ watches memread accesses, flags = VM_WRITE watches memwrite accesses.
41  * Caller passes in a 64bit aligned addr, with mask set to the bytes that need to be
42  * watched. This is only useful on a single cpu machine for now. After the watchpoint
43  * is detected, the process causing it will be killed, thus preventing an infinite loop.
44  */
45 void set_brkpt(unsigned long addr, unsigned char mask, int flags, int mode)
46 {
47         unsigned long lsubits;
48
49         __asm__ __volatile__("ldxa [%%g0] %1, %0"
50                              : "=r" (lsubits)
51                              : "i" (ASI_LSU_CONTROL));
52         lsubits &= ~(LSU_CONTROL_PM | LSU_CONTROL_VM |
53                      LSU_CONTROL_PR | LSU_CONTROL_VR |
54                      LSU_CONTROL_PW | LSU_CONTROL_VW);
55
56         __asm__ __volatile__("stxa      %0, [%1] %2\n\t"
57                              "membar    #Sync"
58                              : /* no outputs */
59                              : "r" (addr), "r" (mode ? VIRT_WATCHPOINT : PHYS_WATCHPOINT),
60                                "i" (ASI_DMMU));
61
62         lsubits |= ((unsigned long)mask << (mode ? 25 : 33));
63         if (flags & VM_READ)
64                 lsubits |= (mode ? LSU_CONTROL_VR : LSU_CONTROL_PR);
65         if (flags & VM_WRITE)
66                 lsubits |= (mode ? LSU_CONTROL_VW : LSU_CONTROL_PW);
67         __asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
68                              "membar #Sync"
69                              : /* no outputs */
70                              : "r" (lsubits), "i" (ASI_LSU_CONTROL)
71                              : "memory");
72 }
73
74 /* Nice, simple, prom library does all the sweating for us. ;) */
75 unsigned long __init prom_probe_memory (void)
76 {
77         register struct linux_mlist_p1275 *mlist;
78         register unsigned long bytes, base_paddr, tally;
79         register int i;
80
81         i = 0;
82         mlist = *prom_meminfo()->p1275_available;
83         bytes = tally = mlist->num_bytes;
84         base_paddr = mlist->start_adr;
85   
86         sp_banks[0].base_addr = base_paddr;
87         sp_banks[0].num_bytes = bytes;
88
89         while (mlist->theres_more != (void *) 0) {
90                 i++;
91                 mlist = mlist->theres_more;
92                 bytes = mlist->num_bytes;
93                 tally += bytes;
94                 if (i >= SPARC_PHYS_BANKS-1) {
95                         printk ("The machine has more banks than "
96                                 "this kernel can support\n"
97                                 "Increase the SPARC_PHYS_BANKS "
98                                 "setting (currently %d)\n",
99                                 SPARC_PHYS_BANKS);
100                         i = SPARC_PHYS_BANKS-1;
101                         break;
102                 }
103     
104                 sp_banks[i].base_addr = mlist->start_adr;
105                 sp_banks[i].num_bytes = mlist->num_bytes;
106         }
107
108         i++;
109         sp_banks[i].base_addr = 0xdeadbeefbeefdeadUL;
110         sp_banks[i].num_bytes = 0;
111
112         /* Now mask all bank sizes on a page boundary, it is all we can
113          * use anyways.
114          */
115         for (i = 0; sp_banks[i].num_bytes != 0; i++)
116                 sp_banks[i].num_bytes &= PAGE_MASK;
117
118         return tally;
119 }
120
121 static void __kprobes unhandled_fault(unsigned long address,
122                                       struct task_struct *tsk,
123                                       struct pt_regs *regs)
124 {
125         if ((unsigned long) address < PAGE_SIZE) {
126                 printk(KERN_ALERT "Unable to handle kernel NULL "
127                        "pointer dereference\n");
128         } else {
129                 printk(KERN_ALERT "Unable to handle kernel paging request "
130                        "at virtual address %016lx\n", (unsigned long)address);
131         }
132         printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n",
133                (tsk->mm ?
134                 CTX_HWBITS(tsk->mm->context) :
135                 CTX_HWBITS(tsk->active_mm->context)));
136         printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n",
137                (tsk->mm ? (unsigned long) tsk->mm->pgd :
138                           (unsigned long) tsk->active_mm->pgd));
139         if (notify_die(DIE_GPF, "general protection fault", regs,
140                        0, 0, SIGSEGV) == NOTIFY_STOP)
141                 return;
142         die_if_kernel("Oops", regs);
143 }
144
145 static void bad_kernel_pc(struct pt_regs *regs)
146 {
147         unsigned long *ksp;
148
149         printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
150                regs->tpc);
151         __asm__("mov %%sp, %0" : "=r" (ksp));
152         show_stack(current, ksp);
153         unhandled_fault(regs->tpc, current, regs);
154 }
155
156 /*
157  * We now make sure that mmap_sem is held in all paths that call 
158  * this. Additionally, to prevent kswapd from ripping ptes from
159  * under us, raise interrupts around the time that we look at the
160  * pte, kswapd will have to wait to get his smp ipi response from
161  * us. This saves us having to get page_table_lock.
162  */
163 static unsigned int get_user_insn(unsigned long tpc)
164 {
165         pgd_t *pgdp = pgd_offset(current->mm, tpc);
166         pud_t *pudp;
167         pmd_t *pmdp;
168         pte_t *ptep, pte;
169         unsigned long pa;
170         u32 insn = 0;
171         unsigned long pstate;
172
173         if (pgd_none(*pgdp))
174                 goto outret;
175         pudp = pud_offset(pgdp, tpc);
176         if (pud_none(*pudp))
177                 goto outret;
178         pmdp = pmd_offset(pudp, tpc);
179         if (pmd_none(*pmdp))
180                 goto outret;
181
182         /* This disables preemption for us as well. */
183         __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
184         __asm__ __volatile__("wrpr %0, %1, %%pstate"
185                                 : : "r" (pstate), "i" (PSTATE_IE));
186         ptep = pte_offset_map(pmdp, tpc);
187         pte = *ptep;
188         if (!pte_present(pte))
189                 goto out;
190
191         pa  = (pte_val(pte) & _PAGE_PADDR);
192         pa += (tpc & ~PAGE_MASK);
193
194         /* Use phys bypass so we don't pollute dtlb/dcache. */
195         __asm__ __volatile__("lduwa [%1] %2, %0"
196                              : "=r" (insn)
197                              : "r" (pa), "i" (ASI_PHYS_USE_EC));
198
199 out:
200         pte_unmap(ptep);
201         __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
202 outret:
203         return insn;
204 }
205
206 extern unsigned long compute_effective_address(struct pt_regs *, unsigned int, unsigned int);
207
208 static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
209                              unsigned int insn, int fault_code)
210 {
211         siginfo_t info;
212
213         info.si_code = code;
214         info.si_signo = sig;
215         info.si_errno = 0;
216         if (fault_code & FAULT_CODE_ITLB)
217                 info.si_addr = (void __user *) regs->tpc;
218         else
219                 info.si_addr = (void __user *)
220                         compute_effective_address(regs, insn, 0);
221         info.si_trapno = 0;
222         force_sig_info(sig, &info, current);
223 }
224
225 extern int handle_ldf_stq(u32, struct pt_regs *);
226 extern int handle_ld_nf(u32, struct pt_regs *);
227
228 static unsigned int get_fault_insn(struct pt_regs *regs, unsigned int insn)
229 {
230         if (!insn) {
231                 if (!regs->tpc || (regs->tpc & 0x3))
232                         return 0;
233                 if (regs->tstate & TSTATE_PRIV) {
234                         insn = *(unsigned int *) regs->tpc;
235                 } else {
236                         insn = get_user_insn(regs->tpc);
237                 }
238         }
239         return insn;
240 }
241
242 static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
243                             unsigned int insn, unsigned long address)
244 {
245         unsigned char asi = ASI_P;
246  
247         if ((!insn) && (regs->tstate & TSTATE_PRIV))
248                 goto cannot_handle;
249
250         /* If user insn could be read (thus insn is zero), that
251          * is fine.  We will just gun down the process with a signal
252          * in that case.
253          */
254
255         if (!(fault_code & (FAULT_CODE_WRITE|FAULT_CODE_ITLB)) &&
256             (insn & 0xc0800000) == 0xc0800000) {
257                 if (insn & 0x2000)
258                         asi = (regs->tstate >> 24);
259                 else
260                         asi = (insn >> 5);
261                 if ((asi & 0xf2) == 0x82) {
262                         if (insn & 0x1000000) {
263                                 handle_ldf_stq(insn, regs);
264                         } else {
265                                 /* This was a non-faulting load. Just clear the
266                                  * destination register(s) and continue with the next
267                                  * instruction. -jj
268                                  */
269                                 handle_ld_nf(insn, regs);
270                         }
271                         return;
272                 }
273         }
274                 
275         /* Is this in ex_table? */
276         if (regs->tstate & TSTATE_PRIV) {
277                 const struct exception_table_entry *entry;
278
279                 if (asi == ASI_P && (insn & 0xc0800000) == 0xc0800000) {
280                         if (insn & 0x2000)
281                                 asi = (regs->tstate >> 24);
282                         else
283                                 asi = (insn >> 5);
284                 }
285         
286                 /* Look in asi.h: All _S asis have LS bit set */
287                 if ((asi & 0x1) &&
288                     (entry = search_exception_tables(regs->tpc))) {
289                         regs->tpc = entry->fixup;
290                         regs->tnpc = regs->tpc + 4;
291                         return;
292                 }
293         } else {
294                 /* The si_code was set to make clear whether
295                  * this was a SEGV_MAPERR or SEGV_ACCERR fault.
296                  */
297                 do_fault_siginfo(si_code, SIGSEGV, regs, insn, fault_code);
298                 return;
299         }
300
301 cannot_handle:
302         unhandled_fault (address, current, regs);
303 }
304
305 asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
306 {
307         struct mm_struct *mm = current->mm;
308         struct vm_area_struct *vma;
309         unsigned int insn = 0;
310         int si_code, fault_code;
311         unsigned long address;
312
313         fault_code = get_thread_fault_code();
314
315         if (notify_die(DIE_PAGE_FAULT, "page_fault", regs,
316                        fault_code, 0, SIGSEGV) == NOTIFY_STOP)
317                 return;
318
319         si_code = SEGV_MAPERR;
320         address = current_thread_info()->fault_address;
321
322         if ((fault_code & FAULT_CODE_ITLB) &&
323             (fault_code & FAULT_CODE_DTLB))
324                 BUG();
325
326         if (regs->tstate & TSTATE_PRIV) {
327                 unsigned long tpc = regs->tpc;
328
329                 /* Sanity check the PC. */
330                 if ((tpc >= KERNBASE && tpc < (unsigned long) _etext) ||
331                     (tpc >= MODULES_VADDR && tpc < MODULES_END)) {
332                         /* Valid, no problems... */
333                 } else {
334                         bad_kernel_pc(regs);
335                         return;
336                 }
337         }
338
339         /*
340          * If we're in an interrupt or have no user
341          * context, we must not take the fault..
342          */
343         if (in_atomic() || !mm)
344                 goto intr_or_no_mm;
345
346         if (test_thread_flag(TIF_32BIT)) {
347                 if (!(regs->tstate & TSTATE_PRIV))
348                         regs->tpc &= 0xffffffff;
349                 address &= 0xffffffff;
350         }
351
352         if (!down_read_trylock(&mm->mmap_sem)) {
353                 if ((regs->tstate & TSTATE_PRIV) &&
354                     !search_exception_tables(regs->tpc)) {
355                         insn = get_fault_insn(regs, insn);
356                         goto handle_kernel_fault;
357                 }
358                 down_read(&mm->mmap_sem);
359         }
360
361         vma = find_vma(mm, address);
362         if (!vma)
363                 goto bad_area;
364
365         /* Pure DTLB misses do not tell us whether the fault causing
366          * load/store/atomic was a write or not, it only says that there
367          * was no match.  So in such a case we (carefully) read the
368          * instruction to try and figure this out.  It's an optimization
369          * so it's ok if we can't do this.
370          *
371          * Special hack, window spill/fill knows the exact fault type.
372          */
373         if (((fault_code &
374               (FAULT_CODE_DTLB | FAULT_CODE_WRITE | FAULT_CODE_WINFIXUP)) == FAULT_CODE_DTLB) &&
375             (vma->vm_flags & VM_WRITE) != 0) {
376                 insn = get_fault_insn(regs, 0);
377                 if (!insn)
378                         goto continue_fault;
379                 if ((insn & 0xc0200000) == 0xc0200000 &&
380                     (insn & 0x1780000) != 0x1680000) {
381                         /* Don't bother updating thread struct value,
382                          * because update_mmu_cache only cares which tlb
383                          * the access came from.
384                          */
385                         fault_code |= FAULT_CODE_WRITE;
386                 }
387         }
388 continue_fault:
389
390         if (vma->vm_start <= address)
391                 goto good_area;
392         if (!(vma->vm_flags & VM_GROWSDOWN))
393                 goto bad_area;
394         if (!(fault_code & FAULT_CODE_WRITE)) {
395                 /* Non-faulting loads shouldn't expand stack. */
396                 insn = get_fault_insn(regs, insn);
397                 if ((insn & 0xc0800000) == 0xc0800000) {
398                         unsigned char asi;
399
400                         if (insn & 0x2000)
401                                 asi = (regs->tstate >> 24);
402                         else
403                                 asi = (insn >> 5);
404                         if ((asi & 0xf2) == 0x82)
405                                 goto bad_area;
406                 }
407         }
408         if (expand_stack(vma, address))
409                 goto bad_area;
410         /*
411          * Ok, we have a good vm_area for this memory access, so
412          * we can handle it..
413          */
414 good_area:
415         si_code = SEGV_ACCERR;
416
417         /* If we took a ITLB miss on a non-executable page, catch
418          * that here.
419          */
420         if ((fault_code & FAULT_CODE_ITLB) && !(vma->vm_flags & VM_EXEC)) {
421                 BUG_ON(address != regs->tpc);
422                 BUG_ON(regs->tstate & TSTATE_PRIV);
423                 goto bad_area;
424         }
425
426         if (fault_code & FAULT_CODE_WRITE) {
427                 if (!(vma->vm_flags & VM_WRITE))
428                         goto bad_area;
429
430                 /* Spitfire has an icache which does not snoop
431                  * processor stores.  Later processors do...
432                  */
433                 if (tlb_type == spitfire &&
434                     (vma->vm_flags & VM_EXEC) != 0 &&
435                     vma->vm_file != NULL)
436                         set_thread_fault_code(fault_code |
437                                               FAULT_CODE_BLKCOMMIT);
438         } else {
439                 /* Allow reads even for write-only mappings */
440                 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
441                         goto bad_area;
442         }
443
444         switch (handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE))) {
445         case VM_FAULT_MINOR:
446                 current->min_flt++;
447                 break;
448         case VM_FAULT_MAJOR:
449                 current->maj_flt++;
450                 break;
451         case VM_FAULT_SIGBUS:
452                 goto do_sigbus;
453         case VM_FAULT_OOM:
454                 goto out_of_memory;
455         default:
456                 BUG();
457         }
458
459         up_read(&mm->mmap_sem);
460         goto fault_done;
461
462         /*
463          * Something tried to access memory that isn't in our memory map..
464          * Fix it, but check if it's kernel or user first..
465          */
466 bad_area:
467         insn = get_fault_insn(regs, insn);
468         up_read(&mm->mmap_sem);
469
470 handle_kernel_fault:
471         do_kernel_fault(regs, si_code, fault_code, insn, address);
472
473         goto fault_done;
474
475 /*
476  * We ran out of memory, or some other thing happened to us that made
477  * us unable to handle the page fault gracefully.
478  */
479 out_of_memory:
480         insn = get_fault_insn(regs, insn);
481         up_read(&mm->mmap_sem);
482         printk("VM: killing process %s\n", current->comm);
483         if (!(regs->tstate & TSTATE_PRIV))
484                 do_exit(SIGKILL);
485         goto handle_kernel_fault;
486
487 intr_or_no_mm:
488         insn = get_fault_insn(regs, 0);
489         goto handle_kernel_fault;
490
491 do_sigbus:
492         insn = get_fault_insn(regs, insn);
493         up_read(&mm->mmap_sem);
494
495         /*
496          * Send a sigbus, regardless of whether we were in kernel
497          * or user mode.
498          */
499         do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, insn, fault_code);
500
501         /* Kernel mode? Handle exceptions or die */
502         if (regs->tstate & TSTATE_PRIV)
503                 goto handle_kernel_fault;
504
505 fault_done:
506         /* These values are no longer needed, clear them. */
507         set_thread_fault_code(0);
508         current_thread_info()->fault_address = 0;
509 }