SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/powerpc/boot/dts/mpc832x_mds.dts

   1 /*
   2  * MPC8323E EMDS Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10
  11  * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
  12  * this:
  13  *
  14  * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
  15  * 2) Solder a wire from U61-21 to P19A-23.  P19 is a grid of pins on the board
  16  *    next to the serial ports.
  17  * 3) Solder a wire from U61-22 to P19K-22.
  18  *
  19  * Note that there's a typo in the schematic.  The board labels the last column
  20  * of pins "P19K", but in the schematic, that column is called "P19J".  So if
  21  * you're going by the schematic, the pin is called "P19J-K22".
  22  */
  23
  24 /dts-v1/;
  25
  26 / {
  27         model = "MPC8323EMDS";
  28         compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
  29         #address-cells = <1>;
  30         #size-cells = <1>;
  31
  32         aliases {
  33                 ethernet0 = &enet0;
  34                 ethernet1 = &enet1;
  35                 serial0 = &serial0;
  36                 serial1 = &serial1;
  37                 pci0 = &pci0;
  38         };
  39
  40         cpus {
  41                 #address-cells = <1>;
  42                 #size-cells = <0>;
  43
  44                 PowerPC,8323@0 {
  45                         device_type = "cpu";
  46                         reg = <0x0>;
  47                         d-cache-line-size = <32>;       // 32 bytes
  48                         i-cache-line-size = <32>;       // 32 bytes
  49                         d-cache-size = <16384>;         // L1, 16K
  50                         i-cache-size = <16384>;         // L1, 16K
  51                         timebase-frequency = <0>;
  52                         bus-frequency = <0>;
  53                         clock-frequency = <0>;
  54                 };
  55         };
  56
  57         memory {
  58                 device_type = "memory";
  59                 reg = <0x00000000 0x08000000>;
  60         };
  61
  62         bcsr@f8000000 {
  63                 device_type = "board-control";
  64                 reg = <0xf8000000 0x8000>;
  65         };
  66
  67         soc8323@e0000000 {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 device_type = "soc";
  71                 ranges = <0x0 0xe0000000 0x00100000>;
  72                 reg = <0xe0000000 0x00000200>;
  73                 bus-frequency = <132000000>;
  74
  75                 wdt@200 {
  76                         device_type = "watchdog";
  77                         compatible = "mpc83xx_wdt";
  78                         reg = <0x200 0x100>;
  79                 };
  80
  81                 i2c@3000 {
  82                         #address-cells = <1>;
  83                         #size-cells = <0>;
  84                         cell-index = <0>;
  85                         compatible = "fsl-i2c";
  86                         reg = <0x3000 0x100>;
  87                         interrupts = <14 0x8>;
  88                         interrupt-parent = <&ipic>;
  89                         dfsrr;
  90
  91                         rtc@68 {
  92                                 compatible = "dallas,ds1374";
  93                                 reg = <0x68>;
  94                         };
  95                 };
  96
  97                 serial0: serial@4500 {
  98                         cell-index = <0>;
  99                         device_type = "serial";
 100                         compatible = "ns16550";
 101                         reg = <0x4500 0x100>;
 102                         clock-frequency = <0>;
 103                         interrupts = <9 0x8>;
 104                         interrupt-parent = <&ipic>;
 105                 };
 106
 107                 serial1: serial@4600 {
 108                         cell-index = <1>;
 109                         device_type = "serial";
 110                         compatible = "ns16550";
 111                         reg = <0x4600 0x100>;
 112                         clock-frequency = <0>;
 113                         interrupts = <10 0x8>;
 114                         interrupt-parent = <&ipic>;
 115                 };
 116
 117                 crypto@30000 {
 118                         device_type = "crypto";
 119                         model = "SEC2";
 120                         compatible = "talitos";
 121                         reg = <0x30000 0x7000>;
 122                         interrupts = <11 0x8>;
 123                         interrupt-parent = <&ipic>;
 124                         /* Rev. 2.2 */
 125                         num-channels = <1>;
 126                         channel-fifo-len = <24>;
 127                         exec-units-mask = <0x0000004c>;
 128                         descriptor-types-mask = <0x0122003f>;
 129                 };
 130
 131                 ipic: pic@700 {
 132                         interrupt-controller;
 133                         #address-cells = <0>;
 134                         #interrupt-cells = <2>;
 135                         reg = <0x700 0x100>;
 136                         device_type = "ipic";
 137                 };
 138
 139                 par_io@1400 {
 140                         reg = <0x1400 0x100>;
 141                         device_type = "par_io";
 142                         num-ports = <7>;
 143
 144                         pio3: ucc_pin@03 {
 145                                 pio-map = <
 146                         /* port  pin  dir  open_drain  assignment  has_irq */
 147                                         3  4  3  0  2  0  /* MDIO */
 148                                         3  5  1  0  2  0  /* MDC */
 149                                         0 13  2  0  1  0        /* RX_CLK (CLK9) */
 150                                         3 24  2  0  1  0        /* TX_CLK (CLK10) */
 151                                         1  0  1  0  1  0        /* TxD0 */
 152                                         1  1  1  0  1  0        /* TxD1 */
 153                                         1  2  1  0  1  0        /* TxD2 */
 154                                         1  3  1  0  1  0        /* TxD3 */
 155                                         1  4  2  0  1  0        /* RxD0 */
 156                                         1  5  2  0  1  0        /* RxD1 */
 157                                         1  6  2  0  1  0        /* RxD2 */
 158                                         1  7  2  0  1  0        /* RxD3 */
 159                                         1  8  2  0  1  0        /* RX_ER */
 160                                         1  9  1  0  1  0        /* TX_ER */
 161                                         1 10  2  0  1  0        /* RX_DV */
 162                                         1 11  2  0  1  0        /* COL */
 163                                         1 12  1  0  1  0        /* TX_EN */
 164                                         1 13  2  0  1  0>;      /* CRS */
 165                         };
 166                         pio4: ucc_pin@04 {
 167                                 pio-map = <
 168                         /* port  pin  dir  open_drain  assignment  has_irq */
 169                                         3 31  2  0  1  0        /* RX_CLK (CLK7) */
 170                                         3  6  2  0  1  0        /* TX_CLK (CLK8) */
 171                                         1 18  1  0  1  0        /* TxD0 */
 172                                         1 19  1  0  1  0        /* TxD1 */
 173                                         1 20  1  0  1  0        /* TxD2 */
 174                                         1 21  1  0  1  0        /* TxD3 */
 175                                         1 22  2  0  1  0        /* RxD0 */
 176                                         1 23  2  0  1  0        /* RxD1 */
 177                                         1 24  2  0  1  0        /* RxD2 */
 178                                         1 25  2  0  1  0        /* RxD3 */
 179                                         1 26  2  0  1  0        /* RX_ER */
 180                                         1 27  1  0  1  0        /* TX_ER */
 181                                         1 28  2  0  1  0        /* RX_DV */
 182                                         1 29  2  0  1  0        /* COL */
 183                                         1 30  1  0  1  0        /* TX_EN */
 184                                         1 31  2  0  1  0>;      /* CRS */
 185                         };
 186                         pio5: ucc_pin@05 {
 187                                 pio-map = <
 188                                 /*
 189                                  *                    open       has
 190                                  *   port  pin  dir  drain  sel  irq
 191                                  */
 192                                         2    0    1      0    2    0  /* TxD5 */
 193                                         2    8    2      0    2    0  /* RxD5 */
 194
 195                                         2   29    2      0    0    0  /* CTS5 */
 196                                         2   31    1      0    2    0  /* RTS5 */
 197
 198                                         2   24    2      0    0    0  /* CD */
 199
 200                                 >;
 201                         };
 202
 203                 };
 204         };
 205
 206         qe@e0100000 {
 207                 #address-cells = <1>;
 208                 #size-cells = <1>;
 209                 device_type = "qe";
 210                 compatible = "fsl,qe";
 211                 ranges = <0x0 0xe0100000 0x00100000>;
 212                 reg = <0xe0100000 0x480>;
 213                 brg-frequency = <0>;
 214                 bus-frequency = <198000000>;
 215
 216                 muram@10000 {
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
 220                         ranges = <0x0 0x00010000 0x00004000>;
 221
 222                         data-only@0 {
 223                                 compatible = "fsl,qe-muram-data",
 224                                              "fsl,cpm-muram-data";
 225                                 reg = <0x0 0x4000>;
 226                         };
 227                 };
 228
 229                 spi@4c0 {
 230                         cell-index = <0>;
 231                         compatible = "fsl,spi";
 232                         reg = <0x4c0 0x40>;
 233                         interrupts = <2>;
 234                         interrupt-parent = <&qeic>;
 235                         mode = "cpu";
 236                 };
 237
 238                 spi@500 {
 239                         cell-index = <1>;
 240                         compatible = "fsl,spi";
 241                         reg = <0x500 0x40>;
 242                         interrupts = <1>;
 243                         interrupt-parent = <&qeic>;
 244                         mode = "cpu";
 245                 };
 246
 247                 usb@6c0 {
 248                         compatible = "qe_udc";
 249                         reg = <0x6c0 0x40 0x8b00 0x100>;
 250                         interrupts = <11>;
 251                         interrupt-parent = <&qeic>;
 252                         mode = "slave";
 253                 };
 254
 255                 enet0: ucc@2200 {
 256                         device_type = "network";
 257                         compatible = "ucc_geth";
 258                         cell-index = <3>;
 259                         reg = <0x2200 0x200>;
 260                         interrupts = <34>;
 261                         interrupt-parent = <&qeic>;
 262                         local-mac-address = [ 00 00 00 00 00 00 ];
 263                         rx-clock-name = "clk9";
 264                         tx-clock-name = "clk10";
 265                         phy-handle = <&phy3>;
 266                         pio-handle = <&pio3>;
 267                 };
 268
 269                 enet1: ucc@3200 {
 270                         device_type = "network";
 271                         compatible = "ucc_geth";
 272                         cell-index = <4>;
 273                         reg = <0x3200 0x200>;
 274                         interrupts = <35>;
 275                         interrupt-parent = <&qeic>;
 276                         local-mac-address = [ 00 00 00 00 00 00 ];
 277                         rx-clock-name = "clk7";
 278                         tx-clock-name = "clk8";
 279                         phy-handle = <&phy4>;
 280                         pio-handle = <&pio4>;
 281                 };
 282
 283                 ucc@2400 {
 284                         device_type = "serial";
 285                         compatible = "ucc_uart";
 286                         cell-index = <5>;       /* The UCC number, 1-7*/
 287                         port-number = <0>;      /* Which ttyQEx device */
 288                         soft-uart;              /* We need Soft-UART */
 289                         reg = <0x2400 0x200>;
 290                         interrupts = <40>;      /* From Table 18-12 */
 291                         interrupt-parent = < &qeic >;
 292                         /*
 293                          * For Soft-UART, we need to set TX to 1X, which
 294                          * means specifying separate clock sources.
 295                          */
 296                         rx-clock-name = "brg5";
 297                         tx-clock-name = "brg6";
 298                         pio-handle = < &pio5 >;
 299                 };
 300
 301
 302                 mdio@2320 {
 303                         #address-cells = <1>;
 304                         #size-cells = <0>;
 305                         reg = <0x2320 0x18>;
 306                         compatible = "fsl,ucc-mdio";
 307
 308                         phy3: ethernet-phy@03 {
 309                                 interrupt-parent = <&ipic>;
 310                                 interrupts = <17 0x8>;
 311                                 reg = <0x3>;
 312                                 device_type = "ethernet-phy";
 313                         };
 314                         phy4: ethernet-phy@04 {
 315                                 interrupt-parent = <&ipic>;
 316                                 interrupts = <18 0x8>;
 317                                 reg = <0x4>;
 318                                 device_type = "ethernet-phy";
 319                         };
 320                 };
 321
 322                 qeic: interrupt-controller@80 {
 323                         interrupt-controller;
 324                         compatible = "fsl,qe-ic";
 325                         #address-cells = <0>;
 326                         #interrupt-cells = <1>;
 327                         reg = <0x80 0x80>;
 328                         big-endian;
 329                         interrupts = <32 0x8 33 0x8>; //high:32 low:33
 330                         interrupt-parent = <&ipic>;
 331                 };
 332         };
 333
 334         pci0: pci@e0008500 {
 335                 cell-index = <1>;
 336                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 337                 interrupt-map = <
 338                                 /* IDSEL 0x11 AD17 */
 339                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
 340                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
 341                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
 342                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
 343
 344                                 /* IDSEL 0x12 AD18 */
 345                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
 346                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
 347                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
 348                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
 349
 350                                 /* IDSEL 0x13 AD19 */
 351                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
 352                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
 353                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
 354                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
 355
 356                                 /* IDSEL 0x15 AD21*/
 357                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
 358                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
 359                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
 360                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
 361
 362                                 /* IDSEL 0x16 AD22*/
 363                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
 364                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
 365                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
 366                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
 367
 368                                 /* IDSEL 0x17 AD23*/
 369                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
 370                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
 371                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
 372                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
 373
 374                                 /* IDSEL 0x18 AD24*/
 375                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
 376                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
 377                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
 378                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
 379                 interrupt-parent = <&ipic>;
 380                 interrupts = <66 0x8>;
 381                 bus-range = <0x0 0x0>;
 382                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 383                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 384                           0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>;
 385                 clock-frequency = <0>;
 386                 #interrupt-cells = <1>;
 387                 #size-cells = <2>;
 388                 #address-cells = <3>;
 389                 reg = <0xe0008500 0x100>;
 390                 compatible = "fsl,mpc8349-pci";
 391                 device_type = "pci";
 392         };
 393 };