2 * MPC8323E EMDS Device Tree Source
4 * Copyright 2006 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
13 model = "MPC8323EMDS";
14 compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
25 d-cache-line-size = <20>; // 32 bytes
26 i-cache-line-size = <20>; // 32 bytes
27 d-cache-size = <4000>; // L1, 16K
28 i-cache-size = <4000>; // L1, 16K
29 timebase-frequency = <0>;
31 clock-frequency = <0>;
36 device_type = "memory";
37 reg = <00000000 08000000>;
41 device_type = "board-control";
42 reg = <f8000000 8000>;
49 ranges = <0 e0000000 00100000>;
50 reg = <e0000000 00000200>;
51 bus-frequency = <7DE2900>;
54 device_type = "watchdog";
55 compatible = "mpc83xx_wdt";
61 compatible = "fsl-i2c";
64 interrupt-parent = < &ipic >;
69 device_type = "serial";
70 compatible = "ns16550";
72 clock-frequency = <0>;
74 interrupt-parent = < &ipic >;
78 device_type = "serial";
79 compatible = "ns16550";
81 clock-frequency = <0>;
83 interrupt-parent = < &ipic >;
87 device_type = "crypto";
89 compatible = "talitos";
92 interrupt-parent = < &ipic >;
95 channel-fifo-len = <18>;
96 exec-units-mask = <0000004c>;
97 descriptor-types-mask = <0122003f>;
101 interrupt-controller;
102 #address-cells = <0>;
103 #interrupt-cells = <2>;
105 device_type = "ipic";
110 device_type = "par_io";
115 /* port pin dir open_drain assignment has_irq */
116 3 4 3 0 2 0 /* MDIO */
117 3 5 1 0 2 0 /* MDC */
118 0 d 2 0 1 0 /* RX_CLK (CLK9) */
119 3 18 2 0 1 0 /* TX_CLK (CLK10) */
120 1 0 1 0 1 0 /* TxD0 */
121 1 1 1 0 1 0 /* TxD1 */
122 1 2 1 0 1 0 /* TxD2 */
123 1 3 1 0 1 0 /* TxD3 */
124 1 4 2 0 1 0 /* RxD0 */
125 1 5 2 0 1 0 /* RxD1 */
126 1 6 2 0 1 0 /* RxD2 */
127 1 7 2 0 1 0 /* RxD3 */
128 1 8 2 0 1 0 /* RX_ER */
129 1 9 1 0 1 0 /* TX_ER */
130 1 a 2 0 1 0 /* RX_DV */
131 1 b 2 0 1 0 /* COL */
132 1 c 1 0 1 0 /* TX_EN */
133 1 d 2 0 1 0>;/* CRS */
137 /* port pin dir open_drain assignment has_irq */
138 3 1f 2 0 1 0 /* RX_CLK (CLK7) */
139 3 6 2 0 1 0 /* TX_CLK (CLK8) */
140 1 12 1 0 1 0 /* TxD0 */
141 1 13 1 0 1 0 /* TxD1 */
142 1 14 1 0 1 0 /* TxD2 */
143 1 15 1 0 1 0 /* TxD3 */
144 1 16 2 0 1 0 /* RxD0 */
145 1 17 2 0 1 0 /* RxD1 */
146 1 18 2 0 1 0 /* RxD2 */
147 1 19 2 0 1 0 /* RxD3 */
148 1 1a 2 0 1 0 /* RX_ER */
149 1 1b 1 0 1 0 /* TX_ER */
150 1 1c 2 0 1 0 /* RX_DV */
151 1 1d 2 0 1 0 /* COL */
152 1 1e 1 0 1 0 /* TX_EN */
153 1 1f 2 0 1 0>;/* CRS */
159 #address-cells = <1>;
163 ranges = <0 e0100000 00100000>;
164 reg = <e0100000 480>;
166 bus-frequency = <BCD3D80>;
169 device_type = "muram";
170 ranges = <0 00010000 00004000>;
179 compatible = "fsl_spi";
182 interrupt-parent = < &qeic >;
188 compatible = "fsl_spi";
191 interrupt-parent = < &qeic >;
197 compatible = "qe_udc";
198 reg = <6c0 40 8B00 100>;
200 interrupt-parent = < &qeic >;
205 device_type = "network";
206 compatible = "ucc_geth";
211 interrupt-parent = < &qeic >;
213 * mac-address is deprecated and will be removed
214 * in 2.6.25. Only recent versions of
215 * U-Boot support local-mac-address, however.
217 mac-address = [ 00 00 00 00 00 00 ];
218 local-mac-address = [ 00 00 00 00 00 00 ];
221 phy-handle = < &phy3 >;
222 pio-handle = < &pio3 >;
226 device_type = "network";
227 compatible = "ucc_geth";
232 interrupt-parent = < &qeic >;
234 * mac-address is deprecated and will be removed
235 * in 2.6.25. Only recent versions of
236 * U-Boot support local-mac-address, however.
238 mac-address = [ 00 00 00 00 00 00 ];
239 local-mac-address = [ 00 00 00 00 00 00 ];
242 phy-handle = < &phy4 >;
243 pio-handle = < &pio4 >;
247 #address-cells = <1>;
250 device_type = "mdio";
251 compatible = "ucc_geth_phy";
253 phy3: ethernet-phy@03 {
254 interrupt-parent = < &ipic >;
257 device_type = "ethernet-phy";
259 phy4: ethernet-phy@04 {
260 interrupt-parent = < &ipic >;
263 device_type = "ethernet-phy";
268 interrupt-controller;
269 device_type = "qeic";
270 #address-cells = <0>;
271 #interrupt-cells = <1>;
274 interrupts = <20 8 21 8>; //high:32 low:33
275 interrupt-parent = < &ipic >;
280 interrupt-map-mask = <f800 0 0 7>;
282 /* IDSEL 0x11 AD17 */
283 8800 0 0 1 &ipic 14 8
284 8800 0 0 2 &ipic 15 8
285 8800 0 0 3 &ipic 16 8
286 8800 0 0 4 &ipic 17 8
288 /* IDSEL 0x12 AD18 */
289 9000 0 0 1 &ipic 16 8
290 9000 0 0 2 &ipic 17 8
291 9000 0 0 3 &ipic 14 8
292 9000 0 0 4 &ipic 15 8
294 /* IDSEL 0x13 AD19 */
295 9800 0 0 1 &ipic 17 8
296 9800 0 0 2 &ipic 14 8
297 9800 0 0 3 &ipic 15 8
298 9800 0 0 4 &ipic 16 8
301 a800 0 0 1 &ipic 14 8
302 a800 0 0 2 &ipic 15 8
303 a800 0 0 3 &ipic 16 8
304 a800 0 0 4 &ipic 17 8
307 b000 0 0 1 &ipic 17 8
308 b000 0 0 2 &ipic 14 8
309 b000 0 0 3 &ipic 15 8
310 b000 0 0 4 &ipic 16 8
313 b800 0 0 1 &ipic 16 8
314 b800 0 0 2 &ipic 17 8
315 b800 0 0 3 &ipic 14 8
316 b800 0 0 4 &ipic 15 8
319 c000 0 0 1 &ipic 15 8
320 c000 0 0 2 &ipic 16 8
321 c000 0 0 3 &ipic 17 8
322 c000 0 0 4 &ipic 14 8>;
323 interrupt-parent = < &ipic >;
326 ranges = <02000000 0 90000000 90000000 0 10000000
327 42000000 0 80000000 80000000 0 10000000
328 01000000 0 00000000 d0000000 0 00100000>;
329 clock-frequency = <0>;
330 #interrupt-cells = <1>;
332 #address-cells = <3>;
333 reg = <e0008500 100>;
334 compatible = "fsl,mpc8349-pci";