2 * MPC8313E RDB Device Tree Source
4 * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
13 model = "MPC8313ERDB";
14 compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
33 d-cache-line-size = <20>; // 32 bytes
34 i-cache-line-size = <20>; // 32 bytes
35 d-cache-size = <4000>; // L1, 16K
36 i-cache-size = <4000>; // L1, 16K
37 timebase-frequency = <0>; // from bootloader
38 bus-frequency = <0>; // from bootloader
39 clock-frequency = <0>; // from bootloader
44 device_type = "memory";
45 reg = <00000000 08000000>; // 128MB at 0
52 ranges = <0 e0000000 00100000>;
53 reg = <e0000000 00000200>;
57 device_type = "watchdog";
58 compatible = "mpc83xx_wdt";
66 compatible = "fsl-i2c";
69 interrupt-parent = < &ipic >;
77 compatible = "fsl-i2c";
80 interrupt-parent = < &ipic >;
86 compatible = "fsl_spi";
89 interrupt-parent = < &ipic >;
93 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
96 compatible = "fsl-usb2-dr";
100 interrupt-parent = < &ipic >;
102 phy_type = "utmi_wide";
106 #address-cells = <1>;
108 compatible = "fsl,gianfar-mdio";
110 phy1: ethernet-phy@1 {
111 interrupt-parent = < &ipic >;
114 device_type = "ethernet-phy";
116 phy4: ethernet-phy@4 {
117 interrupt-parent = < &ipic >;
120 device_type = "ethernet-phy";
124 enet0: ethernet@24000 {
126 device_type = "network";
128 compatible = "gianfar";
130 local-mac-address = [ 00 00 00 00 00 00 ];
131 interrupts = <25 8 24 8 23 8>;
132 interrupt-parent = < &ipic >;
133 phy-handle = < &phy1 >;
136 enet1: ethernet@25000 {
138 device_type = "network";
140 compatible = "gianfar";
142 local-mac-address = [ 00 00 00 00 00 00 ];
143 interrupts = <22 8 21 8 20 8>;
144 interrupt-parent = < &ipic >;
145 phy-handle = < &phy4 >;
148 serial0: serial@4500 {
150 device_type = "serial";
151 compatible = "ns16550";
153 clock-frequency = <0>;
155 interrupt-parent = < &ipic >;
158 serial1: serial@4600 {
160 device_type = "serial";
161 compatible = "ns16550";
163 clock-frequency = <0>;
165 interrupt-parent = < &ipic >;
169 device_type = "crypto";
171 compatible = "talitos";
174 interrupt-parent = < &ipic >;
177 channel-fifo-len = <18>;
178 exec-units-mask = <0000004c>;
179 descriptor-types-mask = <0122003f>;
183 * interrupts cell = <intr #, sense>
184 * sense values match linux IORESOURCE_IRQ_* defines:
185 * sense == 8: Level, low assertion
186 * sense == 2: Edge, high-to-low change
189 interrupt-controller;
190 #address-cells = <0>;
191 #interrupt-cells = <2>;
193 device_type = "ipic";
199 interrupt-map-mask = <f800 0 0 7>;
202 /* IDSEL 0x0E -mini PCI */
203 7000 0 0 1 &ipic 12 8
204 7000 0 0 2 &ipic 12 8
205 7000 0 0 3 &ipic 12 8
206 7000 0 0 4 &ipic 12 8
208 /* IDSEL 0x0F - PCI slot */
209 7800 0 0 1 &ipic 11 8
210 7800 0 0 2 &ipic 12 8
211 7800 0 0 3 &ipic 11 8
212 7800 0 0 4 &ipic 12 8>;
213 interrupt-parent = < &ipic >;
216 ranges = <02000000 0 90000000 90000000 0 10000000
217 42000000 0 80000000 80000000 0 10000000
218 01000000 0 00000000 e2000000 0 00100000>;
219 clock-frequency = <3f940aa>;
220 #interrupt-cells = <1>;
222 #address-cells = <3>;
223 reg = <e0008500 100>;
224 compatible = "fsl,mpc8349-pci";