[PATCH] pgdat allocation and update for ia64 of memory hotplug: hold pgdat address...
[safe/jmp/linux-2.6] / arch / ia64 / mm / discontig.c
1 /*
2  * Copyright (c) 2000, 2003 Silicon Graphics, Inc.  All rights reserved.
3  * Copyright (c) 2001 Intel Corp.
4  * Copyright (c) 2001 Tony Luck <tony.luck@intel.com>
5  * Copyright (c) 2002 NEC Corp.
6  * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
7  * Copyright (c) 2004 Silicon Graphics, Inc
8  *      Russ Anderson <rja@sgi.com>
9  *      Jesse Barnes <jbarnes@sgi.com>
10  *      Jack Steiner <steiner@sgi.com>
11  */
12
13 /*
14  * Platform initialization for Discontig Memory
15  */
16
17 #include <linux/kernel.h>
18 #include <linux/mm.h>
19 #include <linux/swap.h>
20 #include <linux/bootmem.h>
21 #include <linux/acpi.h>
22 #include <linux/efi.h>
23 #include <linux/nodemask.h>
24 #include <asm/pgalloc.h>
25 #include <asm/tlb.h>
26 #include <asm/meminit.h>
27 #include <asm/numa.h>
28 #include <asm/sections.h>
29
30 /*
31  * Track per-node information needed to setup the boot memory allocator, the
32  * per-node areas, and the real VM.
33  */
34 struct early_node_data {
35         struct ia64_node_data *node_data;
36         unsigned long pernode_addr;
37         unsigned long pernode_size;
38         struct bootmem_data bootmem_data;
39         unsigned long num_physpages;
40         unsigned long num_dma_physpages;
41         unsigned long min_pfn;
42         unsigned long max_pfn;
43 };
44
45 static struct early_node_data mem_data[MAX_NUMNODES] __initdata;
46 static nodemask_t memory_less_mask __initdata;
47
48 static pg_data_t *pgdat_list[MAX_NUMNODES];
49
50 /*
51  * To prevent cache aliasing effects, align per-node structures so that they
52  * start at addresses that are strided by node number.
53  */
54 #define MAX_NODE_ALIGN_OFFSET   (32 * 1024 * 1024)
55 #define NODEDATA_ALIGN(addr, node)                                              \
56         ((((addr) + 1024*1024-1) & ~(1024*1024-1)) +                            \
57              (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
58
59 /**
60  * build_node_maps - callback to setup bootmem structs for each node
61  * @start: physical start of range
62  * @len: length of range
63  * @node: node where this range resides
64  *
65  * We allocate a struct bootmem_data for each piece of memory that we wish to
66  * treat as a virtually contiguous block (i.e. each node). Each such block
67  * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
68  * if necessary.  Any non-existent pages will simply be part of the virtual
69  * memmap.  We also update min_low_pfn and max_low_pfn here as we receive
70  * memory ranges from the caller.
71  */
72 static int __init build_node_maps(unsigned long start, unsigned long len,
73                                   int node)
74 {
75         unsigned long cstart, epfn, end = start + len;
76         struct bootmem_data *bdp = &mem_data[node].bootmem_data;
77
78         epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
79         cstart = GRANULEROUNDDOWN(start);
80
81         if (!bdp->node_low_pfn) {
82                 bdp->node_boot_start = cstart;
83                 bdp->node_low_pfn = epfn;
84         } else {
85                 bdp->node_boot_start = min(cstart, bdp->node_boot_start);
86                 bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
87         }
88
89         min_low_pfn = min(min_low_pfn, bdp->node_boot_start>>PAGE_SHIFT);
90         max_low_pfn = max(max_low_pfn, bdp->node_low_pfn);
91
92         return 0;
93 }
94
95 /**
96  * early_nr_cpus_node - return number of cpus on a given node
97  * @node: node to check
98  *
99  * Count the number of cpus on @node.  We can't use nr_cpus_node() yet because
100  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
101  * called yet.  Note that node 0 will also count all non-existent cpus.
102  */
103 static int __init early_nr_cpus_node(int node)
104 {
105         int cpu, n = 0;
106
107         for (cpu = 0; cpu < NR_CPUS; cpu++)
108                 if (node == node_cpuid[cpu].nid)
109                         n++;
110
111         return n;
112 }
113
114 /**
115  * compute_pernodesize - compute size of pernode data
116  * @node: the node id.
117  */
118 static unsigned long __init compute_pernodesize(int node)
119 {
120         unsigned long pernodesize = 0, cpus;
121
122         cpus = early_nr_cpus_node(node);
123         pernodesize += PERCPU_PAGE_SIZE * cpus;
124         pernodesize += node * L1_CACHE_BYTES;
125         pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
126         pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
127         pernodesize = PAGE_ALIGN(pernodesize);
128         return pernodesize;
129 }
130
131 /**
132  * per_cpu_node_setup - setup per-cpu areas on each node
133  * @cpu_data: per-cpu area on this node
134  * @node: node to setup
135  *
136  * Copy the static per-cpu data into the region we just set aside and then
137  * setup __per_cpu_offset for each CPU on this node.  Return a pointer to
138  * the end of the area.
139  */
140 static void *per_cpu_node_setup(void *cpu_data, int node)
141 {
142 #ifdef CONFIG_SMP
143         int cpu;
144
145         for (cpu = 0; cpu < NR_CPUS; cpu++) {
146                 if (node == node_cpuid[cpu].nid) {
147                         memcpy(__va(cpu_data), __phys_per_cpu_start,
148                                __per_cpu_end - __per_cpu_start);
149                         __per_cpu_offset[cpu] = (char*)__va(cpu_data) -
150                                 __per_cpu_start;
151                         cpu_data += PERCPU_PAGE_SIZE;
152                 }
153         }
154 #endif
155         return cpu_data;
156 }
157
158 /**
159  * fill_pernode - initialize pernode data.
160  * @node: the node id.
161  * @pernode: physical address of pernode data
162  * @pernodesize: size of the pernode data
163  */
164 static void __init fill_pernode(int node, unsigned long pernode,
165         unsigned long pernodesize)
166 {
167         void *cpu_data;
168         int cpus = early_nr_cpus_node(node);
169         struct bootmem_data *bdp = &mem_data[node].bootmem_data;
170
171         mem_data[node].pernode_addr = pernode;
172         mem_data[node].pernode_size = pernodesize;
173         memset(__va(pernode), 0, pernodesize);
174
175         cpu_data = (void *)pernode;
176         pernode += PERCPU_PAGE_SIZE * cpus;
177         pernode += node * L1_CACHE_BYTES;
178
179         pgdat_list[node] = __va(pernode);
180         pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
181
182         mem_data[node].node_data = __va(pernode);
183         pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
184
185         pgdat_list[node]->bdata = bdp;
186         pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
187
188         cpu_data = per_cpu_node_setup(cpu_data, node);
189
190         return;
191 }
192
193 /**
194  * find_pernode_space - allocate memory for memory map and per-node structures
195  * @start: physical start of range
196  * @len: length of range
197  * @node: node where this range resides
198  *
199  * This routine reserves space for the per-cpu data struct, the list of
200  * pg_data_ts and the per-node data struct.  Each node will have something like
201  * the following in the first chunk of addr. space large enough to hold it.
202  *
203  *    ________________________
204  *   |                        |
205  *   |~~~~~~~~~~~~~~~~~~~~~~~~| <-- NODEDATA_ALIGN(start, node) for the first
206  *   |    PERCPU_PAGE_SIZE *  |     start and length big enough
207  *   |    cpus_on_this_node   | Node 0 will also have entries for all non-existent cpus.
208  *   |------------------------|
209  *   |   local pg_data_t *    |
210  *   |------------------------|
211  *   |  local ia64_node_data  |
212  *   |------------------------|
213  *   |          ???           |
214  *   |________________________|
215  *
216  * Once this space has been set aside, the bootmem maps are initialized.  We
217  * could probably move the allocation of the per-cpu and ia64_node_data space
218  * outside of this function and use alloc_bootmem_node(), but doing it here
219  * is straightforward and we get the alignments we want so...
220  */
221 static int __init find_pernode_space(unsigned long start, unsigned long len,
222                                      int node)
223 {
224         unsigned long epfn;
225         unsigned long pernodesize = 0, pernode, pages, mapsize;
226         struct bootmem_data *bdp = &mem_data[node].bootmem_data;
227
228         epfn = (start + len) >> PAGE_SHIFT;
229
230         pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
231         mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
232
233         /*
234          * Make sure this memory falls within this node's usable memory
235          * since we may have thrown some away in build_maps().
236          */
237         if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
238                 return 0;
239
240         /* Don't setup this node's local space twice... */
241         if (mem_data[node].pernode_addr)
242                 return 0;
243
244         /*
245          * Calculate total size needed, incl. what's necessary
246          * for good alignment and alias prevention.
247          */
248         pernodesize = compute_pernodesize(node);
249         pernode = NODEDATA_ALIGN(start, node);
250
251         /* Is this range big enough for what we want to store here? */
252         if (start + len > (pernode + pernodesize + mapsize))
253                 fill_pernode(node, pernode, pernodesize);
254
255         return 0;
256 }
257
258 /**
259  * free_node_bootmem - free bootmem allocator memory for use
260  * @start: physical start of range
261  * @len: length of range
262  * @node: node where this range resides
263  *
264  * Simply calls the bootmem allocator to free the specified ranged from
265  * the given pg_data_t's bdata struct.  After this function has been called
266  * for all the entries in the EFI memory map, the bootmem allocator will
267  * be ready to service allocation requests.
268  */
269 static int __init free_node_bootmem(unsigned long start, unsigned long len,
270                                     int node)
271 {
272         free_bootmem_node(pgdat_list[node], start, len);
273
274         return 0;
275 }
276
277 /**
278  * reserve_pernode_space - reserve memory for per-node space
279  *
280  * Reserve the space used by the bootmem maps & per-node space in the boot
281  * allocator so that when we actually create the real mem maps we don't
282  * use their memory.
283  */
284 static void __init reserve_pernode_space(void)
285 {
286         unsigned long base, size, pages;
287         struct bootmem_data *bdp;
288         int node;
289
290         for_each_online_node(node) {
291                 pg_data_t *pdp = pgdat_list[node];
292
293                 if (node_isset(node, memory_less_mask))
294                         continue;
295
296                 bdp = pdp->bdata;
297
298                 /* First the bootmem_map itself */
299                 pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
300                 size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
301                 base = __pa(bdp->node_bootmem_map);
302                 reserve_bootmem_node(pdp, base, size);
303
304                 /* Now the per-node space */
305                 size = mem_data[node].pernode_size;
306                 base = __pa(mem_data[node].pernode_addr);
307                 reserve_bootmem_node(pdp, base, size);
308         }
309 }
310
311 /**
312  * initialize_pernode_data - fixup per-cpu & per-node pointers
313  *
314  * Each node's per-node area has a copy of the global pg_data_t list, so
315  * we copy that to each node here, as well as setting the per-cpu pointer
316  * to the local node data structure.  The active_cpus field of the per-node
317  * structure gets setup by the platform_cpu_init() function later.
318  */
319 static void __init initialize_pernode_data(void)
320 {
321         int cpu, node;
322
323         /* Copy the pg_data_t list to each node and init the node field */
324         for_each_online_node(node) {
325                 memcpy(mem_data[node].node_data->pg_data_ptrs, pgdat_list,
326                        sizeof(pgdat_list));
327         }
328 #ifdef CONFIG_SMP
329         /* Set the node_data pointer for each per-cpu struct */
330         for (cpu = 0; cpu < NR_CPUS; cpu++) {
331                 node = node_cpuid[cpu].nid;
332                 per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
333         }
334 #else
335         {
336                 struct cpuinfo_ia64 *cpu0_cpu_info;
337                 cpu = 0;
338                 node = node_cpuid[cpu].nid;
339                 cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
340                         ((char *)&per_cpu__cpu_info - __per_cpu_start));
341                 cpu0_cpu_info->node_data = mem_data[node].node_data;
342         }
343 #endif /* CONFIG_SMP */
344 }
345
346 /**
347  * memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit
348  *      node but fall back to any other node when __alloc_bootmem_node fails
349  *      for best.
350  * @nid: node id
351  * @pernodesize: size of this node's pernode data
352  */
353 static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize)
354 {
355         void *ptr = NULL;
356         u8 best = 0xff;
357         int bestnode = -1, node, anynode = 0;
358
359         for_each_online_node(node) {
360                 if (node_isset(node, memory_less_mask))
361                         continue;
362                 else if (node_distance(nid, node) < best) {
363                         best = node_distance(nid, node);
364                         bestnode = node;
365                 }
366                 anynode = node;
367         }
368
369         if (bestnode == -1)
370                 bestnode = anynode;
371
372         ptr = __alloc_bootmem_node(pgdat_list[bestnode], pernodesize,
373                 PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
374
375         return ptr;
376 }
377
378 /**
379  * memory_less_nodes - allocate and initialize CPU only nodes pernode
380  *      information.
381  */
382 static void __init memory_less_nodes(void)
383 {
384         unsigned long pernodesize;
385         void *pernode;
386         int node;
387
388         for_each_node_mask(node, memory_less_mask) {
389                 pernodesize = compute_pernodesize(node);
390                 pernode = memory_less_node_alloc(node, pernodesize);
391                 fill_pernode(node, __pa(pernode), pernodesize);
392         }
393
394         return;
395 }
396
397 #ifdef CONFIG_SPARSEMEM
398 /**
399  * register_sparse_mem - notify SPARSEMEM that this memory range exists.
400  * @start: physical start of range
401  * @end: physical end of range
402  * @arg: unused
403  *
404  * Simply calls SPARSEMEM to register memory section(s).
405  */
406 static int __init register_sparse_mem(unsigned long start, unsigned long end,
407         void *arg)
408 {
409         int nid;
410
411         start = __pa(start) >> PAGE_SHIFT;
412         end = __pa(end) >> PAGE_SHIFT;
413         nid = early_pfn_to_nid(start);
414         memory_present(nid, start, end);
415
416         return 0;
417 }
418
419 static void __init arch_sparse_init(void)
420 {
421         efi_memmap_walk(register_sparse_mem, NULL);
422         sparse_init();
423 }
424 #else
425 #define arch_sparse_init() do {} while (0)
426 #endif
427
428 /**
429  * find_memory - walk the EFI memory map and setup the bootmem allocator
430  *
431  * Called early in boot to setup the bootmem allocator, and to
432  * allocate the per-cpu and per-node structures.
433  */
434 void __init find_memory(void)
435 {
436         int node;
437
438         reserve_memory();
439
440         if (num_online_nodes() == 0) {
441                 printk(KERN_ERR "node info missing!\n");
442                 node_set_online(0);
443         }
444
445         nodes_or(memory_less_mask, memory_less_mask, node_online_map);
446         min_low_pfn = -1;
447         max_low_pfn = 0;
448
449         /* These actually end up getting called by call_pernode_memory() */
450         efi_memmap_walk(filter_rsvd_memory, build_node_maps);
451         efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
452
453         for_each_online_node(node)
454                 if (mem_data[node].bootmem_data.node_low_pfn) {
455                         node_clear(node, memory_less_mask);
456                         mem_data[node].min_pfn = ~0UL;
457                 }
458         /*
459          * Initialize the boot memory maps in reverse order since that's
460          * what the bootmem allocator expects
461          */
462         for (node = MAX_NUMNODES - 1; node >= 0; node--) {
463                 unsigned long pernode, pernodesize, map;
464                 struct bootmem_data *bdp;
465
466                 if (!node_online(node))
467                         continue;
468                 else if (node_isset(node, memory_less_mask))
469                         continue;
470
471                 bdp = &mem_data[node].bootmem_data;
472                 pernode = mem_data[node].pernode_addr;
473                 pernodesize = mem_data[node].pernode_size;
474                 map = pernode + pernodesize;
475
476                 init_bootmem_node(pgdat_list[node],
477                                   map>>PAGE_SHIFT,
478                                   bdp->node_boot_start>>PAGE_SHIFT,
479                                   bdp->node_low_pfn);
480         }
481
482         efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
483
484         reserve_pernode_space();
485         memory_less_nodes();
486         initialize_pernode_data();
487
488         max_pfn = max_low_pfn;
489
490         find_initrd();
491 }
492
493 #ifdef CONFIG_SMP
494 /**
495  * per_cpu_init - setup per-cpu variables
496  *
497  * find_pernode_space() does most of this already, we just need to set
498  * local_per_cpu_offset
499  */
500 void __cpuinit *per_cpu_init(void)
501 {
502         int cpu;
503         static int first_time = 1;
504
505
506         if (smp_processor_id() != 0)
507                 return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
508
509         if (first_time) {
510                 first_time = 0;
511                 for (cpu = 0; cpu < NR_CPUS; cpu++)
512                         per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
513         }
514
515         return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
516 }
517 #endif /* CONFIG_SMP */
518
519 #ifdef CONFIG_VIRTUAL_MEM_MAP
520 static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i)
521 {
522         unsigned long end_address, hole_next_pfn;
523         unsigned long stop_address;
524
525         end_address = (unsigned long) &vmem_map[pgdat->node_start_pfn + i];
526         end_address = PAGE_ALIGN(end_address);
527
528         stop_address = (unsigned long) &vmem_map[
529                 pgdat->node_start_pfn + pgdat->node_spanned_pages];
530
531         do {
532                 pgd_t *pgd;
533                 pud_t *pud;
534                 pmd_t *pmd;
535                 pte_t *pte;
536
537                 pgd = pgd_offset_k(end_address);
538                 if (pgd_none(*pgd)) {
539                         end_address += PGDIR_SIZE;
540                         continue;
541                 }
542
543                 pud = pud_offset(pgd, end_address);
544                 if (pud_none(*pud)) {
545                         end_address += PUD_SIZE;
546                         continue;
547                 }
548
549                 pmd = pmd_offset(pud, end_address);
550                 if (pmd_none(*pmd)) {
551                         end_address += PMD_SIZE;
552                         continue;
553                 }
554
555                 pte = pte_offset_kernel(pmd, end_address);
556 retry_pte:
557                 if (pte_none(*pte)) {
558                         end_address += PAGE_SIZE;
559                         pte++;
560                         if ((end_address < stop_address) &&
561                             (end_address != ALIGN(end_address, 1UL << PMD_SHIFT)))
562                                 goto retry_pte;
563                         continue;
564                 }
565                 /* Found next valid vmem_map page */
566                 break;
567         } while (end_address < stop_address);
568
569         end_address = min(end_address, stop_address);
570         end_address = end_address - (unsigned long) vmem_map + sizeof(struct page) - 1;
571         hole_next_pfn = end_address / sizeof(struct page);
572         return hole_next_pfn - pgdat->node_start_pfn;
573 }
574 #else
575 static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i)
576 {
577         return i + 1;
578 }
579 #endif
580
581 /**
582  * show_mem - give short summary of memory stats
583  *
584  * Shows a simple page count of reserved and used pages in the system.
585  * For discontig machines, it does this on a per-pgdat basis.
586  */
587 void show_mem(void)
588 {
589         int i, total_reserved = 0;
590         int total_shared = 0, total_cached = 0;
591         unsigned long total_present = 0;
592         pg_data_t *pgdat;
593
594         printk("Mem-info:\n");
595         show_free_areas();
596         printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
597         for_each_online_pgdat(pgdat) {
598                 unsigned long present;
599                 unsigned long flags;
600                 int shared = 0, cached = 0, reserved = 0;
601
602                 printk("Node ID: %d\n", pgdat->node_id);
603                 pgdat_resize_lock(pgdat, &flags);
604                 present = pgdat->node_present_pages;
605                 for(i = 0; i < pgdat->node_spanned_pages; i++) {
606                         struct page *page;
607                         if (pfn_valid(pgdat->node_start_pfn + i))
608                                 page = pfn_to_page(pgdat->node_start_pfn + i);
609                         else {
610                                 i = find_next_valid_pfn_for_pgdat(pgdat, i) - 1;
611                                 continue;
612                         }
613                         if (PageReserved(page))
614                                 reserved++;
615                         else if (PageSwapCache(page))
616                                 cached++;
617                         else if (page_count(page))
618                                 shared += page_count(page)-1;
619                 }
620                 pgdat_resize_unlock(pgdat, &flags);
621                 total_present += present;
622                 total_reserved += reserved;
623                 total_cached += cached;
624                 total_shared += shared;
625                 printk("\t%ld pages of RAM\n", present);
626                 printk("\t%d reserved pages\n", reserved);
627                 printk("\t%d pages shared\n", shared);
628                 printk("\t%d pages swap cached\n", cached);
629         }
630         printk("%ld pages of RAM\n", total_present);
631         printk("%d reserved pages\n", total_reserved);
632         printk("%d pages shared\n", total_shared);
633         printk("%d pages swap cached\n", total_cached);
634         printk("Total of %ld pages in page table cache\n",
635                 pgtable_quicklist_total_size());
636         printk("%d free buffer pages\n", nr_free_buffer_pages());
637 }
638
639 /**
640  * call_pernode_memory - use SRAT to call callback functions with node info
641  * @start: physical start of range
642  * @len: length of range
643  * @arg: function to call for each range
644  *
645  * efi_memmap_walk() knows nothing about layout of memory across nodes. Find
646  * out to which node a block of memory belongs.  Ignore memory that we cannot
647  * identify, and split blocks that run across multiple nodes.
648  *
649  * Take this opportunity to round the start address up and the end address
650  * down to page boundaries.
651  */
652 void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
653 {
654         unsigned long rs, re, end = start + len;
655         void (*func)(unsigned long, unsigned long, int);
656         int i;
657
658         start = PAGE_ALIGN(start);
659         end &= PAGE_MASK;
660         if (start >= end)
661                 return;
662
663         func = arg;
664
665         if (!num_node_memblks) {
666                 /* No SRAT table, so assume one node (node 0) */
667                 if (start < end)
668                         (*func)(start, end - start, 0);
669                 return;
670         }
671
672         for (i = 0; i < num_node_memblks; i++) {
673                 rs = max(start, node_memblk[i].start_paddr);
674                 re = min(end, node_memblk[i].start_paddr +
675                          node_memblk[i].size);
676
677                 if (rs < re)
678                         (*func)(rs, re - rs, node_memblk[i].nid);
679
680                 if (re == end)
681                         break;
682         }
683 }
684
685 /**
686  * count_node_pages - callback to build per-node memory info structures
687  * @start: physical start of range
688  * @len: length of range
689  * @node: node where this range resides
690  *
691  * Each node has it's own number of physical pages, DMAable pages, start, and
692  * end page frame number.  This routine will be called by call_pernode_memory()
693  * for each piece of usable memory and will setup these values for each node.
694  * Very similar to build_maps().
695  */
696 static __init int count_node_pages(unsigned long start, unsigned long len, int node)
697 {
698         unsigned long end = start + len;
699
700         mem_data[node].num_physpages += len >> PAGE_SHIFT;
701         if (start <= __pa(MAX_DMA_ADDRESS))
702                 mem_data[node].num_dma_physpages +=
703                         (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
704         start = GRANULEROUNDDOWN(start);
705         start = ORDERROUNDDOWN(start);
706         end = GRANULEROUNDUP(end);
707         mem_data[node].max_pfn = max(mem_data[node].max_pfn,
708                                      end >> PAGE_SHIFT);
709         mem_data[node].min_pfn = min(mem_data[node].min_pfn,
710                                      start >> PAGE_SHIFT);
711
712         return 0;
713 }
714
715 /**
716  * paging_init - setup page tables
717  *
718  * paging_init() sets up the page tables for each node of the system and frees
719  * the bootmem allocator memory for general use.
720  */
721 void __init paging_init(void)
722 {
723         unsigned long max_dma;
724         unsigned long zones_size[MAX_NR_ZONES];
725         unsigned long zholes_size[MAX_NR_ZONES];
726         unsigned long pfn_offset = 0;
727         int node;
728
729         max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
730
731         arch_sparse_init();
732
733         efi_memmap_walk(filter_rsvd_memory, count_node_pages);
734
735 #ifdef CONFIG_VIRTUAL_MEM_MAP
736         vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
737         vmem_map = (struct page *) vmalloc_end;
738         efi_memmap_walk(create_mem_map_page_table, NULL);
739         printk("Virtual mem_map starts at 0x%p\n", vmem_map);
740 #endif
741
742         for_each_online_node(node) {
743                 memset(zones_size, 0, sizeof(zones_size));
744                 memset(zholes_size, 0, sizeof(zholes_size));
745
746                 num_physpages += mem_data[node].num_physpages;
747
748                 if (mem_data[node].min_pfn >= max_dma) {
749                         /* All of this node's memory is above ZONE_DMA */
750                         zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
751                                 mem_data[node].min_pfn;
752                         zholes_size[ZONE_NORMAL] = mem_data[node].max_pfn -
753                                 mem_data[node].min_pfn -
754                                 mem_data[node].num_physpages;
755                 } else if (mem_data[node].max_pfn < max_dma) {
756                         /* All of this node's memory is in ZONE_DMA */
757                         zones_size[ZONE_DMA] = mem_data[node].max_pfn -
758                                 mem_data[node].min_pfn;
759                         zholes_size[ZONE_DMA] = mem_data[node].max_pfn -
760                                 mem_data[node].min_pfn -
761                                 mem_data[node].num_dma_physpages;
762                 } else {
763                         /* This node has memory in both zones */
764                         zones_size[ZONE_DMA] = max_dma -
765                                 mem_data[node].min_pfn;
766                         zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] -
767                                 mem_data[node].num_dma_physpages;
768                         zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
769                                 max_dma;
770                         zholes_size[ZONE_NORMAL] = zones_size[ZONE_NORMAL] -
771                                 (mem_data[node].num_physpages -
772                                  mem_data[node].num_dma_physpages);
773                 }
774
775                 pfn_offset = mem_data[node].min_pfn;
776
777 #ifdef CONFIG_VIRTUAL_MEM_MAP
778                 NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
779 #endif
780                 free_area_init_node(node, NODE_DATA(node), zones_size,
781                                     pfn_offset, zholes_size);
782         }
783
784         zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
785 }