ia64: allocate percpu area for cpu0 like percpu areas for other cpus
[safe/jmp/linux-2.6] / arch / ia64 / mm / discontig.c
1 /*
2  * Copyright (c) 2000, 2003 Silicon Graphics, Inc.  All rights reserved.
3  * Copyright (c) 2001 Intel Corp.
4  * Copyright (c) 2001 Tony Luck <tony.luck@intel.com>
5  * Copyright (c) 2002 NEC Corp.
6  * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
7  * Copyright (c) 2004 Silicon Graphics, Inc
8  *      Russ Anderson <rja@sgi.com>
9  *      Jesse Barnes <jbarnes@sgi.com>
10  *      Jack Steiner <steiner@sgi.com>
11  */
12
13 /*
14  * Platform initialization for Discontig Memory
15  */
16
17 #include <linux/kernel.h>
18 #include <linux/mm.h>
19 #include <linux/nmi.h>
20 #include <linux/swap.h>
21 #include <linux/bootmem.h>
22 #include <linux/acpi.h>
23 #include <linux/efi.h>
24 #include <linux/nodemask.h>
25 #include <asm/pgalloc.h>
26 #include <asm/tlb.h>
27 #include <asm/meminit.h>
28 #include <asm/numa.h>
29 #include <asm/sections.h>
30
31 /*
32  * Track per-node information needed to setup the boot memory allocator, the
33  * per-node areas, and the real VM.
34  */
35 struct early_node_data {
36         struct ia64_node_data *node_data;
37         unsigned long pernode_addr;
38         unsigned long pernode_size;
39         unsigned long num_physpages;
40 #ifdef CONFIG_ZONE_DMA
41         unsigned long num_dma_physpages;
42 #endif
43         unsigned long min_pfn;
44         unsigned long max_pfn;
45 };
46
47 static struct early_node_data mem_data[MAX_NUMNODES] __initdata;
48 static nodemask_t memory_less_mask __initdata;
49
50 pg_data_t *pgdat_list[MAX_NUMNODES];
51
52 /*
53  * To prevent cache aliasing effects, align per-node structures so that they
54  * start at addresses that are strided by node number.
55  */
56 #define MAX_NODE_ALIGN_OFFSET   (32 * 1024 * 1024)
57 #define NODEDATA_ALIGN(addr, node)                                              \
58         ((((addr) + 1024*1024-1) & ~(1024*1024-1)) +                            \
59              (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
60
61 /**
62  * build_node_maps - callback to setup bootmem structs for each node
63  * @start: physical start of range
64  * @len: length of range
65  * @node: node where this range resides
66  *
67  * We allocate a struct bootmem_data for each piece of memory that we wish to
68  * treat as a virtually contiguous block (i.e. each node). Each such block
69  * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
70  * if necessary.  Any non-existent pages will simply be part of the virtual
71  * memmap.  We also update min_low_pfn and max_low_pfn here as we receive
72  * memory ranges from the caller.
73  */
74 static int __init build_node_maps(unsigned long start, unsigned long len,
75                                   int node)
76 {
77         unsigned long spfn, epfn, end = start + len;
78         struct bootmem_data *bdp = &bootmem_node_data[node];
79
80         epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
81         spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
82
83         if (!bdp->node_low_pfn) {
84                 bdp->node_min_pfn = spfn;
85                 bdp->node_low_pfn = epfn;
86         } else {
87                 bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
88                 bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
89         }
90
91         return 0;
92 }
93
94 /**
95  * early_nr_cpus_node - return number of cpus on a given node
96  * @node: node to check
97  *
98  * Count the number of cpus on @node.  We can't use nr_cpus_node() yet because
99  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
100  * called yet.  Note that node 0 will also count all non-existent cpus.
101  */
102 static int __meminit early_nr_cpus_node(int node)
103 {
104         int cpu, n = 0;
105
106         for_each_possible_early_cpu(cpu)
107                 if (node == node_cpuid[cpu].nid)
108                         n++;
109
110         return n;
111 }
112
113 /**
114  * compute_pernodesize - compute size of pernode data
115  * @node: the node id.
116  */
117 static unsigned long __meminit compute_pernodesize(int node)
118 {
119         unsigned long pernodesize = 0, cpus;
120
121         cpus = early_nr_cpus_node(node);
122         pernodesize += PERCPU_PAGE_SIZE * cpus;
123         pernodesize += node * L1_CACHE_BYTES;
124         pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
125         pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
126         pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
127         pernodesize = PAGE_ALIGN(pernodesize);
128         return pernodesize;
129 }
130
131 /**
132  * per_cpu_node_setup - setup per-cpu areas on each node
133  * @cpu_data: per-cpu area on this node
134  * @node: node to setup
135  *
136  * Copy the static per-cpu data into the region we just set aside and then
137  * setup __per_cpu_offset for each CPU on this node.  Return a pointer to
138  * the end of the area.
139  */
140 static void *per_cpu_node_setup(void *cpu_data, int node)
141 {
142 #ifdef CONFIG_SMP
143         int cpu;
144
145         for_each_possible_early_cpu(cpu) {
146                 void *src = cpu == 0 ? __cpu0_per_cpu : __phys_per_cpu_start;
147
148                 if (node != node_cpuid[cpu].nid)
149                         continue;
150
151                 memcpy(__va(cpu_data), src, __per_cpu_end - __per_cpu_start);
152                 __per_cpu_offset[cpu] = (char *)__va(cpu_data) -
153                         __per_cpu_start;
154
155                 /*
156                  * percpu area for cpu0 is moved from the __init area
157                  * which is setup by head.S and used till this point.
158                  * Update ar.k3.  This move is ensures that percpu
159                  * area for cpu0 is on the correct node and its
160                  * virtual address isn't insanely far from other
161                  * percpu areas which is important for congruent
162                  * percpu allocator.
163                  */
164                 if (cpu == 0)
165                         ia64_set_kr(IA64_KR_PER_CPU_DATA,
166                                     (unsigned long)cpu_data -
167                                     (unsigned long)__per_cpu_start);
168
169                 cpu_data += PERCPU_PAGE_SIZE;
170         }
171 #endif
172         return cpu_data;
173 }
174
175 /**
176  * fill_pernode - initialize pernode data.
177  * @node: the node id.
178  * @pernode: physical address of pernode data
179  * @pernodesize: size of the pernode data
180  */
181 static void __init fill_pernode(int node, unsigned long pernode,
182         unsigned long pernodesize)
183 {
184         void *cpu_data;
185         int cpus = early_nr_cpus_node(node);
186         struct bootmem_data *bdp = &bootmem_node_data[node];
187
188         mem_data[node].pernode_addr = pernode;
189         mem_data[node].pernode_size = pernodesize;
190         memset(__va(pernode), 0, pernodesize);
191
192         cpu_data = (void *)pernode;
193         pernode += PERCPU_PAGE_SIZE * cpus;
194         pernode += node * L1_CACHE_BYTES;
195
196         pgdat_list[node] = __va(pernode);
197         pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
198
199         mem_data[node].node_data = __va(pernode);
200         pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
201
202         pgdat_list[node]->bdata = bdp;
203         pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
204
205         cpu_data = per_cpu_node_setup(cpu_data, node);
206
207         return;
208 }
209
210 /**
211  * find_pernode_space - allocate memory for memory map and per-node structures
212  * @start: physical start of range
213  * @len: length of range
214  * @node: node where this range resides
215  *
216  * This routine reserves space for the per-cpu data struct, the list of
217  * pg_data_ts and the per-node data struct.  Each node will have something like
218  * the following in the first chunk of addr. space large enough to hold it.
219  *
220  *    ________________________
221  *   |                        |
222  *   |~~~~~~~~~~~~~~~~~~~~~~~~| <-- NODEDATA_ALIGN(start, node) for the first
223  *   |    PERCPU_PAGE_SIZE *  |     start and length big enough
224  *   |    cpus_on_this_node   | Node 0 will also have entries for all non-existent cpus.
225  *   |------------------------|
226  *   |   local pg_data_t *    |
227  *   |------------------------|
228  *   |  local ia64_node_data  |
229  *   |------------------------|
230  *   |          ???           |
231  *   |________________________|
232  *
233  * Once this space has been set aside, the bootmem maps are initialized.  We
234  * could probably move the allocation of the per-cpu and ia64_node_data space
235  * outside of this function and use alloc_bootmem_node(), but doing it here
236  * is straightforward and we get the alignments we want so...
237  */
238 static int __init find_pernode_space(unsigned long start, unsigned long len,
239                                      int node)
240 {
241         unsigned long spfn, epfn;
242         unsigned long pernodesize = 0, pernode, pages, mapsize;
243         struct bootmem_data *bdp = &bootmem_node_data[node];
244
245         spfn = start >> PAGE_SHIFT;
246         epfn = (start + len) >> PAGE_SHIFT;
247
248         pages = bdp->node_low_pfn - bdp->node_min_pfn;
249         mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
250
251         /*
252          * Make sure this memory falls within this node's usable memory
253          * since we may have thrown some away in build_maps().
254          */
255         if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
256                 return 0;
257
258         /* Don't setup this node's local space twice... */
259         if (mem_data[node].pernode_addr)
260                 return 0;
261
262         /*
263          * Calculate total size needed, incl. what's necessary
264          * for good alignment and alias prevention.
265          */
266         pernodesize = compute_pernodesize(node);
267         pernode = NODEDATA_ALIGN(start, node);
268
269         /* Is this range big enough for what we want to store here? */
270         if (start + len > (pernode + pernodesize + mapsize))
271                 fill_pernode(node, pernode, pernodesize);
272
273         return 0;
274 }
275
276 /**
277  * free_node_bootmem - free bootmem allocator memory for use
278  * @start: physical start of range
279  * @len: length of range
280  * @node: node where this range resides
281  *
282  * Simply calls the bootmem allocator to free the specified ranged from
283  * the given pg_data_t's bdata struct.  After this function has been called
284  * for all the entries in the EFI memory map, the bootmem allocator will
285  * be ready to service allocation requests.
286  */
287 static int __init free_node_bootmem(unsigned long start, unsigned long len,
288                                     int node)
289 {
290         free_bootmem_node(pgdat_list[node], start, len);
291
292         return 0;
293 }
294
295 /**
296  * reserve_pernode_space - reserve memory for per-node space
297  *
298  * Reserve the space used by the bootmem maps & per-node space in the boot
299  * allocator so that when we actually create the real mem maps we don't
300  * use their memory.
301  */
302 static void __init reserve_pernode_space(void)
303 {
304         unsigned long base, size, pages;
305         struct bootmem_data *bdp;
306         int node;
307
308         for_each_online_node(node) {
309                 pg_data_t *pdp = pgdat_list[node];
310
311                 if (node_isset(node, memory_less_mask))
312                         continue;
313
314                 bdp = pdp->bdata;
315
316                 /* First the bootmem_map itself */
317                 pages = bdp->node_low_pfn - bdp->node_min_pfn;
318                 size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
319                 base = __pa(bdp->node_bootmem_map);
320                 reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
321
322                 /* Now the per-node space */
323                 size = mem_data[node].pernode_size;
324                 base = __pa(mem_data[node].pernode_addr);
325                 reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
326         }
327 }
328
329 static void __meminit scatter_node_data(void)
330 {
331         pg_data_t **dst;
332         int node;
333
334         /*
335          * for_each_online_node() can't be used at here.
336          * node_online_map is not set for hot-added nodes at this time,
337          * because we are halfway through initialization of the new node's
338          * structures.  If for_each_online_node() is used, a new node's
339          * pg_data_ptrs will be not initialized. Instead of using it,
340          * pgdat_list[] is checked.
341          */
342         for_each_node(node) {
343                 if (pgdat_list[node]) {
344                         dst = LOCAL_DATA_ADDR(pgdat_list[node])->pg_data_ptrs;
345                         memcpy(dst, pgdat_list, sizeof(pgdat_list));
346                 }
347         }
348 }
349
350 /**
351  * initialize_pernode_data - fixup per-cpu & per-node pointers
352  *
353  * Each node's per-node area has a copy of the global pg_data_t list, so
354  * we copy that to each node here, as well as setting the per-cpu pointer
355  * to the local node data structure.  The active_cpus field of the per-node
356  * structure gets setup by the platform_cpu_init() function later.
357  */
358 static void __init initialize_pernode_data(void)
359 {
360         int cpu, node;
361
362         scatter_node_data();
363
364 #ifdef CONFIG_SMP
365         /* Set the node_data pointer for each per-cpu struct */
366         for_each_possible_early_cpu(cpu) {
367                 node = node_cpuid[cpu].nid;
368                 per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
369         }
370 #else
371         {
372                 struct cpuinfo_ia64 *cpu0_cpu_info;
373                 cpu = 0;
374                 node = node_cpuid[cpu].nid;
375                 cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
376                         ((char *)&per_cpu__cpu_info - __per_cpu_start));
377                 cpu0_cpu_info->node_data = mem_data[node].node_data;
378         }
379 #endif /* CONFIG_SMP */
380 }
381
382 /**
383  * memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit
384  *      node but fall back to any other node when __alloc_bootmem_node fails
385  *      for best.
386  * @nid: node id
387  * @pernodesize: size of this node's pernode data
388  */
389 static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize)
390 {
391         void *ptr = NULL;
392         u8 best = 0xff;
393         int bestnode = -1, node, anynode = 0;
394
395         for_each_online_node(node) {
396                 if (node_isset(node, memory_less_mask))
397                         continue;
398                 else if (node_distance(nid, node) < best) {
399                         best = node_distance(nid, node);
400                         bestnode = node;
401                 }
402                 anynode = node;
403         }
404
405         if (bestnode == -1)
406                 bestnode = anynode;
407
408         ptr = __alloc_bootmem_node(pgdat_list[bestnode], pernodesize,
409                 PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
410
411         return ptr;
412 }
413
414 /**
415  * memory_less_nodes - allocate and initialize CPU only nodes pernode
416  *      information.
417  */
418 static void __init memory_less_nodes(void)
419 {
420         unsigned long pernodesize;
421         void *pernode;
422         int node;
423
424         for_each_node_mask(node, memory_less_mask) {
425                 pernodesize = compute_pernodesize(node);
426                 pernode = memory_less_node_alloc(node, pernodesize);
427                 fill_pernode(node, __pa(pernode), pernodesize);
428         }
429
430         return;
431 }
432
433 /**
434  * find_memory - walk the EFI memory map and setup the bootmem allocator
435  *
436  * Called early in boot to setup the bootmem allocator, and to
437  * allocate the per-cpu and per-node structures.
438  */
439 void __init find_memory(void)
440 {
441         int node;
442
443         reserve_memory();
444
445         if (num_online_nodes() == 0) {
446                 printk(KERN_ERR "node info missing!\n");
447                 node_set_online(0);
448         }
449
450         nodes_or(memory_less_mask, memory_less_mask, node_online_map);
451         min_low_pfn = -1;
452         max_low_pfn = 0;
453
454         /* These actually end up getting called by call_pernode_memory() */
455         efi_memmap_walk(filter_rsvd_memory, build_node_maps);
456         efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
457         efi_memmap_walk(find_max_min_low_pfn, NULL);
458
459         for_each_online_node(node)
460                 if (bootmem_node_data[node].node_low_pfn) {
461                         node_clear(node, memory_less_mask);
462                         mem_data[node].min_pfn = ~0UL;
463                 }
464
465         efi_memmap_walk(filter_memory, register_active_ranges);
466
467         /*
468          * Initialize the boot memory maps in reverse order since that's
469          * what the bootmem allocator expects
470          */
471         for (node = MAX_NUMNODES - 1; node >= 0; node--) {
472                 unsigned long pernode, pernodesize, map;
473                 struct bootmem_data *bdp;
474
475                 if (!node_online(node))
476                         continue;
477                 else if (node_isset(node, memory_less_mask))
478                         continue;
479
480                 bdp = &bootmem_node_data[node];
481                 pernode = mem_data[node].pernode_addr;
482                 pernodesize = mem_data[node].pernode_size;
483                 map = pernode + pernodesize;
484
485                 init_bootmem_node(pgdat_list[node],
486                                   map>>PAGE_SHIFT,
487                                   bdp->node_min_pfn,
488                                   bdp->node_low_pfn);
489         }
490
491         efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
492
493         reserve_pernode_space();
494         memory_less_nodes();
495         initialize_pernode_data();
496
497         max_pfn = max_low_pfn;
498
499         find_initrd();
500 }
501
502 #ifdef CONFIG_SMP
503 /**
504  * per_cpu_init - setup per-cpu variables
505  *
506  * find_pernode_space() does most of this already, we just need to set
507  * local_per_cpu_offset
508  */
509 void __cpuinit *per_cpu_init(void)
510 {
511         int cpu;
512         static int first_time = 1;
513
514         if (first_time) {
515                 first_time = 0;
516                 for_each_possible_early_cpu(cpu)
517                         per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
518         }
519
520         return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
521 }
522 #endif /* CONFIG_SMP */
523
524 /**
525  * show_mem - give short summary of memory stats
526  *
527  * Shows a simple page count of reserved and used pages in the system.
528  * For discontig machines, it does this on a per-pgdat basis.
529  */
530 void show_mem(void)
531 {
532         int i, total_reserved = 0;
533         int total_shared = 0, total_cached = 0;
534         unsigned long total_present = 0;
535         pg_data_t *pgdat;
536
537         printk(KERN_INFO "Mem-info:\n");
538         show_free_areas();
539         printk(KERN_INFO "Node memory in pages:\n");
540         for_each_online_pgdat(pgdat) {
541                 unsigned long present;
542                 unsigned long flags;
543                 int shared = 0, cached = 0, reserved = 0;
544
545                 pgdat_resize_lock(pgdat, &flags);
546                 present = pgdat->node_present_pages;
547                 for(i = 0; i < pgdat->node_spanned_pages; i++) {
548                         struct page *page;
549                         if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
550                                 touch_nmi_watchdog();
551                         if (pfn_valid(pgdat->node_start_pfn + i))
552                                 page = pfn_to_page(pgdat->node_start_pfn + i);
553                         else {
554                                 i = vmemmap_find_next_valid_pfn(pgdat->node_id,
555                                          i) - 1;
556                                 continue;
557                         }
558                         if (PageReserved(page))
559                                 reserved++;
560                         else if (PageSwapCache(page))
561                                 cached++;
562                         else if (page_count(page))
563                                 shared += page_count(page)-1;
564                 }
565                 pgdat_resize_unlock(pgdat, &flags);
566                 total_present += present;
567                 total_reserved += reserved;
568                 total_cached += cached;
569                 total_shared += shared;
570                 printk(KERN_INFO "Node %4d:  RAM: %11ld, rsvd: %8d, "
571                        "shrd: %10d, swpd: %10d\n", pgdat->node_id,
572                        present, reserved, shared, cached);
573         }
574         printk(KERN_INFO "%ld pages of RAM\n", total_present);
575         printk(KERN_INFO "%d reserved pages\n", total_reserved);
576         printk(KERN_INFO "%d pages shared\n", total_shared);
577         printk(KERN_INFO "%d pages swap cached\n", total_cached);
578         printk(KERN_INFO "Total of %ld pages in page table cache\n",
579                quicklist_total_size());
580         printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
581 }
582
583 /**
584  * call_pernode_memory - use SRAT to call callback functions with node info
585  * @start: physical start of range
586  * @len: length of range
587  * @arg: function to call for each range
588  *
589  * efi_memmap_walk() knows nothing about layout of memory across nodes. Find
590  * out to which node a block of memory belongs.  Ignore memory that we cannot
591  * identify, and split blocks that run across multiple nodes.
592  *
593  * Take this opportunity to round the start address up and the end address
594  * down to page boundaries.
595  */
596 void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
597 {
598         unsigned long rs, re, end = start + len;
599         void (*func)(unsigned long, unsigned long, int);
600         int i;
601
602         start = PAGE_ALIGN(start);
603         end &= PAGE_MASK;
604         if (start >= end)
605                 return;
606
607         func = arg;
608
609         if (!num_node_memblks) {
610                 /* No SRAT table, so assume one node (node 0) */
611                 if (start < end)
612                         (*func)(start, end - start, 0);
613                 return;
614         }
615
616         for (i = 0; i < num_node_memblks; i++) {
617                 rs = max(start, node_memblk[i].start_paddr);
618                 re = min(end, node_memblk[i].start_paddr +
619                          node_memblk[i].size);
620
621                 if (rs < re)
622                         (*func)(rs, re - rs, node_memblk[i].nid);
623
624                 if (re == end)
625                         break;
626         }
627 }
628
629 /**
630  * count_node_pages - callback to build per-node memory info structures
631  * @start: physical start of range
632  * @len: length of range
633  * @node: node where this range resides
634  *
635  * Each node has it's own number of physical pages, DMAable pages, start, and
636  * end page frame number.  This routine will be called by call_pernode_memory()
637  * for each piece of usable memory and will setup these values for each node.
638  * Very similar to build_maps().
639  */
640 static __init int count_node_pages(unsigned long start, unsigned long len, int node)
641 {
642         unsigned long end = start + len;
643
644         mem_data[node].num_physpages += len >> PAGE_SHIFT;
645 #ifdef CONFIG_ZONE_DMA
646         if (start <= __pa(MAX_DMA_ADDRESS))
647                 mem_data[node].num_dma_physpages +=
648                         (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
649 #endif
650         start = GRANULEROUNDDOWN(start);
651         end = GRANULEROUNDUP(end);
652         mem_data[node].max_pfn = max(mem_data[node].max_pfn,
653                                      end >> PAGE_SHIFT);
654         mem_data[node].min_pfn = min(mem_data[node].min_pfn,
655                                      start >> PAGE_SHIFT);
656
657         return 0;
658 }
659
660 /**
661  * paging_init - setup page tables
662  *
663  * paging_init() sets up the page tables for each node of the system and frees
664  * the bootmem allocator memory for general use.
665  */
666 void __init paging_init(void)
667 {
668         unsigned long max_dma;
669         unsigned long pfn_offset = 0;
670         unsigned long max_pfn = 0;
671         int node;
672         unsigned long max_zone_pfns[MAX_NR_ZONES];
673
674         max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
675
676         efi_memmap_walk(filter_rsvd_memory, count_node_pages);
677
678         sparse_memory_present_with_active_regions(MAX_NUMNODES);
679         sparse_init();
680
681 #ifdef CONFIG_VIRTUAL_MEM_MAP
682         VMALLOC_END -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) *
683                 sizeof(struct page));
684         vmem_map = (struct page *) VMALLOC_END;
685         efi_memmap_walk(create_mem_map_page_table, NULL);
686         printk("Virtual mem_map starts at 0x%p\n", vmem_map);
687 #endif
688
689         for_each_online_node(node) {
690                 num_physpages += mem_data[node].num_physpages;
691                 pfn_offset = mem_data[node].min_pfn;
692
693 #ifdef CONFIG_VIRTUAL_MEM_MAP
694                 NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
695 #endif
696                 if (mem_data[node].max_pfn > max_pfn)
697                         max_pfn = mem_data[node].max_pfn;
698         }
699
700         memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
701 #ifdef CONFIG_ZONE_DMA
702         max_zone_pfns[ZONE_DMA] = max_dma;
703 #endif
704         max_zone_pfns[ZONE_NORMAL] = max_pfn;
705         free_area_init_nodes(max_zone_pfns);
706
707         zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
708 }
709
710 #ifdef CONFIG_MEMORY_HOTPLUG
711 pg_data_t *arch_alloc_nodedata(int nid)
712 {
713         unsigned long size = compute_pernodesize(nid);
714
715         return kzalloc(size, GFP_KERNEL);
716 }
717
718 void arch_free_nodedata(pg_data_t *pgdat)
719 {
720         kfree(pgdat);
721 }
722
723 void arch_refresh_nodedata(int update_node, pg_data_t *update_pgdat)
724 {
725         pgdat_list[update_node] = update_pgdat;
726         scatter_node_data();
727 }
728 #endif
729
730 #ifdef CONFIG_SPARSEMEM_VMEMMAP
731 int __meminit vmemmap_populate(struct page *start_page,
732                                                 unsigned long size, int node)
733 {
734         return vmemmap_populate_basepages(start_page, size, node);
735 }
736 #endif