2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/platform_device.h>
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13 #include <linux/mtd/physmap.h>
14 #include <linux/spi/spi.h>
15 #include <linux/spi/flash.h>
16 #include <linux/irq.h>
17 #include <linux/i2c.h>
18 #include <linux/interrupt.h>
19 #include <linux/usb/musb.h>
20 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/bfin_sdh.h>
27 #include <mach/bf54x_keys.h>
28 #include <linux/input.h>
29 #include <linux/spi/ad7877.h>
32 * Name the Board for the /proc/cpuinfo
34 const char bfin_board_name[] = "ADI BF548-EZKIT";
37 * Driver needs to know address, irq and flag pin.
40 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
41 #include <linux/usb/isp1760.h>
42 static struct resource bfin_isp1760_resources[] = {
45 .end = 0x2C0C0000 + 0xfffff,
46 .flags = IORESOURCE_MEM,
51 .flags = IORESOURCE_IRQ,
55 static struct isp1760_platform_data isp1760_priv = {
60 .dack_polarity_high = 0,
61 .dreq_polarity_high = 0,
64 static struct platform_device bfin_isp1760_device = {
65 .name = "isp1760-hcd",
68 .platform_data = &isp1760_priv,
70 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
71 .resource = bfin_isp1760_resources,
75 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
77 #include <mach/bf54x-lq043.h>
79 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
82 .xres = {480, 480, 480},
83 .yres = {272, 272, 272},
88 static struct resource bf54x_lq043_resources[] = {
90 .start = IRQ_EPPI0_ERR,
92 .flags = IORESOURCE_IRQ,
96 static struct platform_device bf54x_lq043_device = {
97 .name = "bf54x-lq043",
99 .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
100 .resource = bf54x_lq043_resources,
102 .platform_data = &bf54x_lq043_data,
107 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
108 static const unsigned int bf548_keymap[] = {
109 KEYVAL(0, 0, KEY_ENTER),
110 KEYVAL(0, 1, KEY_HELP),
112 KEYVAL(0, 3, KEY_BACKSPACE),
113 KEYVAL(1, 0, KEY_TAB),
117 KEYVAL(2, 0, KEY_DOWN),
121 KEYVAL(3, 0, KEY_UP),
127 static struct bfin_kpad_platform_data bf54x_kpad_data = {
130 .keymap = bf548_keymap,
131 .keymapsize = ARRAY_SIZE(bf548_keymap),
133 .debounce_time = 5000, /* ns (5ms) */
134 .coldrive_time = 1000, /* ns (1ms) */
135 .keyup_test_interval = 50, /* ms (50ms) */
138 static struct resource bf54x_kpad_resources[] = {
142 .flags = IORESOURCE_IRQ,
146 static struct platform_device bf54x_kpad_device = {
147 .name = "bf54x-keys",
149 .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
150 .resource = bf54x_kpad_resources,
152 .platform_data = &bf54x_kpad_data,
157 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
158 #include <asm/bfin_rotary.h>
160 static struct bfin_rotary_platform_data bfin_rotary_data = {
161 /*.rotary_up_key = KEY_UP,*/
162 /*.rotary_down_key = KEY_DOWN,*/
163 .rotary_rel_code = REL_WHEEL,
164 .rotary_button_key = KEY_ENTER,
165 .debounce = 10, /* 0..17 */
166 .mode = ROT_QUAD_ENC | ROT_DEBE,
169 static struct resource bfin_rotary_resources[] = {
173 .flags = IORESOURCE_IRQ,
177 static struct platform_device bfin_rotary_device = {
178 .name = "bfin-rotary",
180 .num_resources = ARRAY_SIZE(bfin_rotary_resources),
181 .resource = bfin_rotary_resources,
183 .platform_data = &bfin_rotary_data,
188 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
189 #include <linux/spi/adxl34x.h>
190 static const struct adxl34x_platform_data adxl34x_info = {
194 .tap_threshold = 0x31,
195 .tap_duration = 0x10,
198 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
199 .act_axis_control = 0xFF,
200 .activity_threshold = 5,
201 .inactivity_threshold = 3,
202 .inactivity_time = 4,
203 .free_fall_threshold = 0x7,
204 .free_fall_time = 0x20,
206 .data_range = ADXL_FULL_RES,
209 .ev_code_x = ABS_X, /* EV_REL */
210 .ev_code_y = ABS_Y, /* EV_REL */
211 .ev_code_z = ABS_Z, /* EV_REL */
213 .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */
214 .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */
215 .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */
217 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
218 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
219 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
220 .fifo_mode = ADXL_FIFO_STREAM,
224 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
225 static struct platform_device rtc_device = {
231 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
232 static struct resource bfin_uart_resources[] = {
233 #ifdef CONFIG_SERIAL_BFIN_UART0
237 .flags = IORESOURCE_MEM,
240 #ifdef CONFIG_SERIAL_BFIN_UART1
244 .flags = IORESOURCE_MEM,
247 #ifdef CONFIG_SERIAL_BFIN_UART2
251 .flags = IORESOURCE_MEM,
254 #ifdef CONFIG_SERIAL_BFIN_UART3
258 .flags = IORESOURCE_MEM,
263 static struct platform_device bfin_uart_device = {
266 .num_resources = ARRAY_SIZE(bfin_uart_resources),
267 .resource = bfin_uart_resources,
271 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
272 #ifdef CONFIG_BFIN_SIR0
273 static struct resource bfin_sir0_resources[] = {
277 .flags = IORESOURCE_MEM,
280 .start = IRQ_UART0_RX,
281 .end = IRQ_UART0_RX+1,
282 .flags = IORESOURCE_IRQ,
285 .start = CH_UART0_RX,
286 .end = CH_UART0_RX+1,
287 .flags = IORESOURCE_DMA,
290 static struct platform_device bfin_sir0_device = {
293 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
294 .resource = bfin_sir0_resources,
297 #ifdef CONFIG_BFIN_SIR1
298 static struct resource bfin_sir1_resources[] = {
302 .flags = IORESOURCE_MEM,
305 .start = IRQ_UART1_RX,
306 .end = IRQ_UART1_RX+1,
307 .flags = IORESOURCE_IRQ,
310 .start = CH_UART1_RX,
311 .end = CH_UART1_RX+1,
312 .flags = IORESOURCE_DMA,
315 static struct platform_device bfin_sir1_device = {
318 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
319 .resource = bfin_sir1_resources,
322 #ifdef CONFIG_BFIN_SIR2
323 static struct resource bfin_sir2_resources[] = {
327 .flags = IORESOURCE_MEM,
330 .start = IRQ_UART2_RX,
331 .end = IRQ_UART2_RX+1,
332 .flags = IORESOURCE_IRQ,
335 .start = CH_UART2_RX,
336 .end = CH_UART2_RX+1,
337 .flags = IORESOURCE_DMA,
340 static struct platform_device bfin_sir2_device = {
343 .num_resources = ARRAY_SIZE(bfin_sir2_resources),
344 .resource = bfin_sir2_resources,
347 #ifdef CONFIG_BFIN_SIR3
348 static struct resource bfin_sir3_resources[] = {
352 .flags = IORESOURCE_MEM,
355 .start = IRQ_UART3_RX,
356 .end = IRQ_UART3_RX+1,
357 .flags = IORESOURCE_IRQ,
360 .start = CH_UART3_RX,
361 .end = CH_UART3_RX+1,
362 .flags = IORESOURCE_DMA,
365 static struct platform_device bfin_sir3_device = {
368 .num_resources = ARRAY_SIZE(bfin_sir3_resources),
369 .resource = bfin_sir3_resources,
374 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
375 #include <linux/smsc911x.h>
377 static struct resource smsc911x_resources[] = {
379 .name = "smsc911x-memory",
381 .end = 0x24000000 + 0xFF,
382 .flags = IORESOURCE_MEM,
387 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
391 static struct smsc911x_platform_config smsc911x_config = {
392 .flags = SMSC911X_USE_32BIT,
393 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
394 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
395 .phy_interface = PHY_INTERFACE_MODE_MII,
398 static struct platform_device smsc911x_device = {
401 .num_resources = ARRAY_SIZE(smsc911x_resources),
402 .resource = smsc911x_resources,
404 .platform_data = &smsc911x_config,
409 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
410 static struct resource musb_resources[] = {
414 .flags = IORESOURCE_MEM,
416 [1] = { /* general IRQ */
417 .start = IRQ_USB_INT0,
419 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
421 [2] = { /* DMA IRQ */
422 .start = IRQ_USB_DMA,
424 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
428 static struct musb_hdrc_config musb_config = {
435 .gpio_vrsel = GPIO_PE7,
438 static struct musb_hdrc_platform_data musb_plat = {
439 #if defined(CONFIG_USB_MUSB_OTG)
441 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
443 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
444 .mode = MUSB_PERIPHERAL,
446 .config = &musb_config,
449 static u64 musb_dmamask = ~(u32)0;
451 static struct platform_device musb_device = {
455 .dma_mask = &musb_dmamask,
456 .coherent_dma_mask = 0xffffffff,
457 .platform_data = &musb_plat,
459 .num_resources = ARRAY_SIZE(musb_resources),
460 .resource = musb_resources,
464 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
465 static struct resource bfin_atapi_resources[] = {
469 .flags = IORESOURCE_MEM,
472 .start = IRQ_ATAPI_ERR,
473 .end = IRQ_ATAPI_ERR,
474 .flags = IORESOURCE_IRQ,
478 static struct platform_device bfin_atapi_device = {
479 .name = "pata-bf54x",
481 .num_resources = ARRAY_SIZE(bfin_atapi_resources),
482 .resource = bfin_atapi_resources,
486 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
487 static struct mtd_partition partition_info[] = {
489 .name = "linux kernel(nand)",
491 .size = 4 * 1024 * 1024,
494 .name = "file system(nand)",
495 .offset = MTDPART_OFS_APPEND,
496 .size = MTDPART_SIZ_FULL,
500 static struct bf5xx_nand_platform bf5xx_nand_platform = {
501 .page_size = NFC_PG_SIZE_256,
502 .data_width = NFC_NWIDTH_8,
503 .partitions = partition_info,
504 .nr_partitions = ARRAY_SIZE(partition_info),
509 static struct resource bf5xx_nand_resources[] = {
513 .flags = IORESOURCE_MEM,
518 .flags = IORESOURCE_IRQ,
522 static struct platform_device bf5xx_nand_device = {
523 .name = "bf5xx-nand",
525 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
526 .resource = bf5xx_nand_resources,
528 .platform_data = &bf5xx_nand_platform,
533 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
535 static struct bfin_sd_host bfin_sdh_data = {
537 .irq_int0 = IRQ_SDH_MASK0,
538 .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
541 static struct platform_device bf54x_sdh_device = {
545 .platform_data = &bfin_sdh_data,
550 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
551 static struct mtd_partition ezkit_partitions[] = {
553 .name = "bootloader(nor)",
557 .name = "linux kernel(nor)",
559 .offset = MTDPART_OFS_APPEND,
561 .name = "file system(nor)",
562 .size = MTDPART_SIZ_FULL,
563 .offset = MTDPART_OFS_APPEND,
567 static struct physmap_flash_data ezkit_flash_data = {
569 .parts = ezkit_partitions,
570 .nr_parts = ARRAY_SIZE(ezkit_partitions),
573 static struct resource ezkit_flash_resource = {
576 .flags = IORESOURCE_MEM,
579 static struct platform_device ezkit_flash_device = {
580 .name = "physmap-flash",
583 .platform_data = &ezkit_flash_data,
586 .resource = &ezkit_flash_resource,
590 #if defined(CONFIG_MTD_M25P80) \
591 || defined(CONFIG_MTD_M25P80_MODULE)
592 /* SPI flash chip (m25p16) */
593 static struct mtd_partition bfin_spi_flash_partitions[] = {
595 .name = "bootloader(spi)",
598 .mask_flags = MTD_CAP_ROM
600 .name = "linux kernel(spi)",
601 .size = MTDPART_SIZ_FULL,
602 .offset = MTDPART_OFS_APPEND,
606 static struct flash_platform_data bfin_spi_flash_data = {
608 .parts = bfin_spi_flash_partitions,
609 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
613 static struct bfin5xx_spi_chip spi_flash_chip_info = {
614 .enable_dma = 0, /* use dma transfer with this chip*/
619 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
620 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
621 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
627 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
628 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
633 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
635 .vref_delay_usecs = 50, /* internal, no capacitor */
638 .pressure_max = 1000,
640 .stopacq_polarity = 1,
641 .first_conversion_delay = 3,
642 .acquisition_time = 1,
644 .pen_down_acc_interval = 1,
648 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
649 static struct bfin5xx_spi_chip spidev_chip_info = {
655 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
656 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
657 .enable_dma = 0, /* use dma transfer with this chip*/
662 static struct spi_board_info bfin_spi_board_info[] __initdata = {
663 #if defined(CONFIG_MTD_M25P80) \
664 || defined(CONFIG_MTD_M25P80_MODULE)
666 /* the modalias must be the same as spi device driver name */
667 .modalias = "m25p80", /* Name of spi_driver for this device */
668 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
669 .bus_num = 0, /* Framework bus number */
670 .chip_select = 1, /* SPI_SSEL1*/
671 .platform_data = &bfin_spi_flash_data,
672 .controller_data = &spi_flash_chip_info,
676 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
677 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
679 .modalias = "ad1836",
680 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
682 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
683 .controller_data = &ad1836_spi_chip_info,
686 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
688 .modalias = "ad7877",
689 .platform_data = &bfin_ad7877_ts_info,
690 .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
691 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
694 .controller_data = &spi_ad7877_chip_info,
697 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
699 .modalias = "spidev",
700 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
703 .controller_data = &spidev_chip_info,
706 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
708 .modalias = "adxl34x",
709 .platform_data = &adxl34x_info,
711 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
714 .controller_data = &spi_adxl34x_chip_info,
719 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
721 static struct resource bfin_spi0_resource[] = {
723 .start = SPI0_REGBASE,
724 .end = SPI0_REGBASE + 0xFF,
725 .flags = IORESOURCE_MEM,
730 .flags = IORESOURCE_DMA,
735 .flags = IORESOURCE_IRQ,
740 static struct resource bfin_spi1_resource[] = {
742 .start = SPI1_REGBASE,
743 .end = SPI1_REGBASE + 0xFF,
744 .flags = IORESOURCE_MEM,
749 .flags = IORESOURCE_DMA,
754 .flags = IORESOURCE_IRQ,
758 /* SPI controller data */
759 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
761 .enable_dma = 1, /* master has the ability to do dma transfer */
762 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
765 static struct platform_device bf54x_spi_master0 = {
767 .id = 0, /* Bus number */
768 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
769 .resource = bfin_spi0_resource,
771 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
775 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
777 .enable_dma = 1, /* master has the ability to do dma transfer */
778 .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
781 static struct platform_device bf54x_spi_master1 = {
783 .id = 1, /* Bus number */
784 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
785 .resource = bfin_spi1_resource,
787 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
790 #endif /* spi master and devices */
792 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
793 static struct resource bfin_twi0_resource[] = {
795 .start = TWI0_REGBASE,
796 .end = TWI0_REGBASE + 0xFF,
797 .flags = IORESOURCE_MEM,
802 .flags = IORESOURCE_IRQ,
806 static struct platform_device i2c_bfin_twi0_device = {
807 .name = "i2c-bfin-twi",
809 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
810 .resource = bfin_twi0_resource,
813 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
814 static struct resource bfin_twi1_resource[] = {
816 .start = TWI1_REGBASE,
817 .end = TWI1_REGBASE + 0xFF,
818 .flags = IORESOURCE_MEM,
823 .flags = IORESOURCE_IRQ,
827 static struct platform_device i2c_bfin_twi1_device = {
828 .name = "i2c-bfin-twi",
830 .num_resources = ARRAY_SIZE(bfin_twi1_resource),
831 .resource = bfin_twi1_resource,
836 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
839 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
840 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
841 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
843 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
846 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
848 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
852 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
854 I2C_BOARD_INFO("adxl34x", 0x53),
856 .platform_data = (void *)&adxl34x_info,
862 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
863 #include <linux/gpio_keys.h>
865 static struct gpio_keys_button bfin_gpio_keys_table[] = {
866 {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
867 {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
868 {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
869 {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
872 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
873 .buttons = bfin_gpio_keys_table,
874 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
877 static struct platform_device bfin_device_gpiokeys = {
880 .platform_data = &bfin_gpio_keys_data,
885 static const unsigned int cclk_vlev_datasheet[] =
888 * Internal VLEV BF54XSBBC1533
889 ****temporarily using these values until data sheet is updated
891 VRPAIR(VLEV_085, 150000000),
892 VRPAIR(VLEV_090, 250000000),
893 VRPAIR(VLEV_110, 276000000),
894 VRPAIR(VLEV_115, 301000000),
895 VRPAIR(VLEV_120, 525000000),
896 VRPAIR(VLEV_125, 550000000),
897 VRPAIR(VLEV_130, 600000000),
900 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
901 .tuple_tab = cclk_vlev_datasheet,
902 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
903 .vr_settling_time = 25 /* us */,
906 static struct platform_device bfin_dpmc = {
909 .platform_data = &bfin_dmpc_vreg_data,
913 static struct platform_device *ezkit_devices[] __initdata = {
917 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
921 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
925 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
926 #ifdef CONFIG_BFIN_SIR0
929 #ifdef CONFIG_BFIN_SIR1
932 #ifdef CONFIG_BFIN_SIR2
935 #ifdef CONFIG_BFIN_SIR3
940 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
944 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
948 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
952 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
953 &bfin_isp1760_device,
956 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
960 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
964 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
968 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
973 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
977 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
981 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
982 &i2c_bfin_twi0_device,
983 #if !defined(CONFIG_BF542)
984 &i2c_bfin_twi1_device,
988 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
989 &bfin_device_gpiokeys,
992 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
997 static int __init ezkit_init(void)
999 printk(KERN_INFO "%s(): registering device resources\n", __func__);
1001 i2c_register_board_info(0, bfin_i2c_board_info0,
1002 ARRAY_SIZE(bfin_i2c_board_info0));
1003 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
1004 i2c_register_board_info(1, bfin_i2c_board_info1,
1005 ARRAY_SIZE(bfin_i2c_board_info1));
1008 platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1010 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1015 arch_initcall(ezkit_init);