2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/platform_device.h>
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13 #include <linux/mtd/physmap.h>
14 #include <linux/spi/spi.h>
15 #include <linux/spi/flash.h>
16 #include <linux/irq.h>
17 #include <linux/i2c.h>
18 #include <linux/interrupt.h>
19 #include <linux/usb/musb.h>
20 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/bfin_sdh.h>
27 #include <mach/bf54x_keys.h>
28 #include <linux/input.h>
29 #include <linux/spi/ad7877.h>
32 * Name the Board for the /proc/cpuinfo
34 const char bfin_board_name[] = "ADI BF548-EZKIT";
37 * Driver needs to know address, irq and flag pin.
40 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
41 #include <linux/usb/isp1760.h>
42 static struct resource bfin_isp1760_resources[] = {
45 .end = 0x2C0C0000 + 0xfffff,
46 .flags = IORESOURCE_MEM,
51 .flags = IORESOURCE_IRQ,
55 static struct isp1760_platform_data isp1760_priv = {
60 .dack_polarity_high = 0,
61 .dreq_polarity_high = 0,
64 static struct platform_device bfin_isp1760_device = {
68 .platform_data = &isp1760_priv,
70 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
71 .resource = bfin_isp1760_resources,
75 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
77 #include <mach/bf54x-lq043.h>
79 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
82 .xres = {480, 480, 480},
83 .yres = {272, 272, 272},
88 static struct resource bf54x_lq043_resources[] = {
90 .start = IRQ_EPPI0_ERR,
92 .flags = IORESOURCE_IRQ,
96 static struct platform_device bf54x_lq043_device = {
97 .name = "bf54x-lq043",
99 .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
100 .resource = bf54x_lq043_resources,
102 .platform_data = &bf54x_lq043_data,
107 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
108 static const unsigned int bf548_keymap[] = {
109 KEYVAL(0, 0, KEY_ENTER),
110 KEYVAL(0, 1, KEY_HELP),
112 KEYVAL(0, 3, KEY_BACKSPACE),
113 KEYVAL(1, 0, KEY_TAB),
117 KEYVAL(2, 0, KEY_DOWN),
121 KEYVAL(3, 0, KEY_UP),
127 static struct bfin_kpad_platform_data bf54x_kpad_data = {
130 .keymap = bf548_keymap,
131 .keymapsize = ARRAY_SIZE(bf548_keymap),
133 .debounce_time = 5000, /* ns (5ms) */
134 .coldrive_time = 1000, /* ns (1ms) */
135 .keyup_test_interval = 50, /* ms (50ms) */
138 static struct resource bf54x_kpad_resources[] = {
142 .flags = IORESOURCE_IRQ,
146 static struct platform_device bf54x_kpad_device = {
147 .name = "bf54x-keys",
149 .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
150 .resource = bf54x_kpad_resources,
152 .platform_data = &bf54x_kpad_data,
157 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
158 #include <asm/bfin_rotary.h>
160 static struct bfin_rotary_platform_data bfin_rotary_data = {
161 /*.rotary_up_key = KEY_UP,*/
162 /*.rotary_down_key = KEY_DOWN,*/
163 .rotary_rel_code = REL_WHEEL,
164 .rotary_button_key = KEY_ENTER,
165 .debounce = 10, /* 0..17 */
166 .mode = ROT_QUAD_ENC | ROT_DEBE,
169 static struct resource bfin_rotary_resources[] = {
173 .flags = IORESOURCE_IRQ,
177 static struct platform_device bfin_rotary_device = {
178 .name = "bfin-rotary",
180 .num_resources = ARRAY_SIZE(bfin_rotary_resources),
181 .resource = bfin_rotary_resources,
183 .platform_data = &bfin_rotary_data,
188 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
189 #include <linux/input/adxl34x.h>
190 static const struct adxl34x_platform_data adxl34x_info = {
194 .tap_threshold = 0x31,
195 .tap_duration = 0x10,
198 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
199 .act_axis_control = 0xFF,
200 .activity_threshold = 5,
201 .inactivity_threshold = 3,
202 .inactivity_time = 4,
203 .free_fall_threshold = 0x7,
204 .free_fall_time = 0x20,
206 .data_range = ADXL_FULL_RES,
209 .ev_code_x = ABS_X, /* EV_REL */
210 .ev_code_y = ABS_Y, /* EV_REL */
211 .ev_code_z = ABS_Z, /* EV_REL */
213 .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
215 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
216 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
217 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
218 .fifo_mode = ADXL_FIFO_STREAM,
219 .orientation_enable = ADXL_EN_ORIENTATION_3D,
220 .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
221 .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
222 /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
223 .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
227 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
228 static struct platform_device rtc_device = {
234 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
235 #ifdef CONFIG_SERIAL_BFIN_UART0
236 static struct resource bfin_uart0_resources[] = {
240 .flags = IORESOURCE_MEM,
243 .start = IRQ_UART0_RX,
244 .end = IRQ_UART0_RX+1,
245 .flags = IORESOURCE_IRQ,
248 .start = IRQ_UART0_ERROR,
249 .end = IRQ_UART0_ERROR,
250 .flags = IORESOURCE_IRQ,
253 .start = CH_UART0_TX,
255 .flags = IORESOURCE_DMA,
258 .start = CH_UART0_RX,
260 .flags = IORESOURCE_DMA,
264 unsigned short bfin_uart0_peripherals[] = {
265 P_UART0_TX, P_UART0_RX, 0
268 static struct platform_device bfin_uart0_device = {
271 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
272 .resource = bfin_uart0_resources,
274 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
278 #ifdef CONFIG_SERIAL_BFIN_UART1
279 static struct resource bfin_uart1_resources[] = {
283 .flags = IORESOURCE_MEM,
286 .start = IRQ_UART1_RX,
287 .end = IRQ_UART1_RX+1,
288 .flags = IORESOURCE_IRQ,
291 .start = IRQ_UART1_ERROR,
292 .end = IRQ_UART1_ERROR,
293 .flags = IORESOURCE_IRQ,
296 .start = CH_UART1_TX,
298 .flags = IORESOURCE_DMA,
301 .start = CH_UART1_RX,
303 .flags = IORESOURCE_DMA,
305 #ifdef CONFIG_BFIN_UART1_CTSRTS
306 { /* CTS pin -- 0 means not supported */
309 .flags = IORESOURCE_IO,
311 { /* RTS pin -- 0 means not supported */
314 .flags = IORESOURCE_IO,
319 unsigned short bfin_uart1_peripherals[] = {
320 P_UART1_TX, P_UART1_RX,
321 #ifdef CONFIG_BFIN_UART1_CTSRTS
322 P_UART1_RTS, P_UART1_CTS,
327 static struct platform_device bfin_uart1_device = {
330 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
331 .resource = bfin_uart1_resources,
333 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
337 #ifdef CONFIG_SERIAL_BFIN_UART2
338 static struct resource bfin_uart2_resources[] = {
342 .flags = IORESOURCE_MEM,
345 .start = IRQ_UART2_RX,
346 .end = IRQ_UART2_RX+1,
347 .flags = IORESOURCE_IRQ,
350 .start = IRQ_UART2_ERROR,
351 .end = IRQ_UART2_ERROR,
352 .flags = IORESOURCE_IRQ,
355 .start = CH_UART2_TX,
357 .flags = IORESOURCE_DMA,
360 .start = CH_UART2_RX,
362 .flags = IORESOURCE_DMA,
366 unsigned short bfin_uart2_peripherals[] = {
367 P_UART2_TX, P_UART2_RX, 0
370 static struct platform_device bfin_uart2_device = {
373 .num_resources = ARRAY_SIZE(bfin_uart2_resources),
374 .resource = bfin_uart2_resources,
376 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
380 #ifdef CONFIG_SERIAL_BFIN_UART3
381 static struct resource bfin_uart3_resources[] = {
385 .flags = IORESOURCE_MEM,
388 .start = IRQ_UART3_RX,
389 .end = IRQ_UART3_RX+1,
390 .flags = IORESOURCE_IRQ,
393 .start = IRQ_UART3_ERROR,
394 .end = IRQ_UART3_ERROR,
395 .flags = IORESOURCE_IRQ,
398 .start = CH_UART3_TX,
400 .flags = IORESOURCE_DMA,
403 .start = CH_UART3_RX,
405 .flags = IORESOURCE_DMA,
407 #ifdef CONFIG_BFIN_UART3_CTSRTS
408 { /* CTS pin -- 0 means not supported */
411 .flags = IORESOURCE_IO,
413 { /* RTS pin -- 0 means not supported */
416 .flags = IORESOURCE_IO,
421 unsigned short bfin_uart3_peripherals[] = {
422 P_UART3_TX, P_UART3_RX,
423 #ifdef CONFIG_BFIN_UART3_CTSRTS
424 P_UART3_RTS, P_UART3_CTS,
429 static struct platform_device bfin_uart3_device = {
432 .num_resources = ARRAY_SIZE(bfin_uart3_resources),
433 .resource = bfin_uart3_resources,
435 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
441 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
442 #ifdef CONFIG_BFIN_SIR0
443 static struct resource bfin_sir0_resources[] = {
447 .flags = IORESOURCE_MEM,
450 .start = IRQ_UART0_RX,
451 .end = IRQ_UART0_RX+1,
452 .flags = IORESOURCE_IRQ,
455 .start = CH_UART0_RX,
456 .end = CH_UART0_RX+1,
457 .flags = IORESOURCE_DMA,
460 static struct platform_device bfin_sir0_device = {
463 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
464 .resource = bfin_sir0_resources,
467 #ifdef CONFIG_BFIN_SIR1
468 static struct resource bfin_sir1_resources[] = {
472 .flags = IORESOURCE_MEM,
475 .start = IRQ_UART1_RX,
476 .end = IRQ_UART1_RX+1,
477 .flags = IORESOURCE_IRQ,
480 .start = CH_UART1_RX,
481 .end = CH_UART1_RX+1,
482 .flags = IORESOURCE_DMA,
485 static struct platform_device bfin_sir1_device = {
488 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
489 .resource = bfin_sir1_resources,
492 #ifdef CONFIG_BFIN_SIR2
493 static struct resource bfin_sir2_resources[] = {
497 .flags = IORESOURCE_MEM,
500 .start = IRQ_UART2_RX,
501 .end = IRQ_UART2_RX+1,
502 .flags = IORESOURCE_IRQ,
505 .start = CH_UART2_RX,
506 .end = CH_UART2_RX+1,
507 .flags = IORESOURCE_DMA,
510 static struct platform_device bfin_sir2_device = {
513 .num_resources = ARRAY_SIZE(bfin_sir2_resources),
514 .resource = bfin_sir2_resources,
517 #ifdef CONFIG_BFIN_SIR3
518 static struct resource bfin_sir3_resources[] = {
522 .flags = IORESOURCE_MEM,
525 .start = IRQ_UART3_RX,
526 .end = IRQ_UART3_RX+1,
527 .flags = IORESOURCE_IRQ,
530 .start = CH_UART3_RX,
531 .end = CH_UART3_RX+1,
532 .flags = IORESOURCE_DMA,
535 static struct platform_device bfin_sir3_device = {
538 .num_resources = ARRAY_SIZE(bfin_sir3_resources),
539 .resource = bfin_sir3_resources,
544 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
545 #include <linux/smsc911x.h>
547 static struct resource smsc911x_resources[] = {
549 .name = "smsc911x-memory",
551 .end = 0x24000000 + 0xFF,
552 .flags = IORESOURCE_MEM,
557 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
561 static struct smsc911x_platform_config smsc911x_config = {
562 .flags = SMSC911X_USE_32BIT,
563 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
564 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
565 .phy_interface = PHY_INTERFACE_MODE_MII,
568 static struct platform_device smsc911x_device = {
571 .num_resources = ARRAY_SIZE(smsc911x_resources),
572 .resource = smsc911x_resources,
574 .platform_data = &smsc911x_config,
579 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
580 static struct resource musb_resources[] = {
584 .flags = IORESOURCE_MEM,
586 [1] = { /* general IRQ */
587 .start = IRQ_USB_INT0,
589 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
591 [2] = { /* DMA IRQ */
592 .start = IRQ_USB_DMA,
594 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
598 static struct musb_hdrc_config musb_config = {
605 .gpio_vrsel = GPIO_PE7,
608 static struct musb_hdrc_platform_data musb_plat = {
609 #if defined(CONFIG_USB_MUSB_OTG)
611 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
613 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
614 .mode = MUSB_PERIPHERAL,
616 .config = &musb_config,
619 static u64 musb_dmamask = ~(u32)0;
621 static struct platform_device musb_device = {
625 .dma_mask = &musb_dmamask,
626 .coherent_dma_mask = 0xffffffff,
627 .platform_data = &musb_plat,
629 .num_resources = ARRAY_SIZE(musb_resources),
630 .resource = musb_resources,
634 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
635 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
636 static struct resource bfin_sport0_uart_resources[] = {
638 .start = SPORT0_TCR1,
639 .end = SPORT0_MRCS3+4,
640 .flags = IORESOURCE_MEM,
643 .start = IRQ_SPORT0_RX,
644 .end = IRQ_SPORT0_RX+1,
645 .flags = IORESOURCE_IRQ,
648 .start = IRQ_SPORT0_ERROR,
649 .end = IRQ_SPORT0_ERROR,
650 .flags = IORESOURCE_IRQ,
654 unsigned short bfin_sport0_peripherals[] = {
655 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
656 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
659 static struct platform_device bfin_sport0_uart_device = {
660 .name = "bfin-sport-uart",
662 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
663 .resource = bfin_sport0_uart_resources,
665 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
669 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
670 static struct resource bfin_sport1_uart_resources[] = {
672 .start = SPORT1_TCR1,
673 .end = SPORT1_MRCS3+4,
674 .flags = IORESOURCE_MEM,
677 .start = IRQ_SPORT1_RX,
678 .end = IRQ_SPORT1_RX+1,
679 .flags = IORESOURCE_IRQ,
682 .start = IRQ_SPORT1_ERROR,
683 .end = IRQ_SPORT1_ERROR,
684 .flags = IORESOURCE_IRQ,
688 unsigned short bfin_sport1_peripherals[] = {
689 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
690 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
693 static struct platform_device bfin_sport1_uart_device = {
694 .name = "bfin-sport-uart",
696 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
697 .resource = bfin_sport1_uart_resources,
699 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
703 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
704 static struct resource bfin_sport2_uart_resources[] = {
706 .start = SPORT2_TCR1,
707 .end = SPORT2_MRCS3+4,
708 .flags = IORESOURCE_MEM,
711 .start = IRQ_SPORT2_RX,
712 .end = IRQ_SPORT2_RX+1,
713 .flags = IORESOURCE_IRQ,
716 .start = IRQ_SPORT2_ERROR,
717 .end = IRQ_SPORT2_ERROR,
718 .flags = IORESOURCE_IRQ,
722 unsigned short bfin_sport2_peripherals[] = {
723 P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
724 P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
727 static struct platform_device bfin_sport2_uart_device = {
728 .name = "bfin-sport-uart",
730 .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
731 .resource = bfin_sport2_uart_resources,
733 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
737 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
738 static struct resource bfin_sport3_uart_resources[] = {
740 .start = SPORT3_TCR1,
741 .end = SPORT3_MRCS3+4,
742 .flags = IORESOURCE_MEM,
745 .start = IRQ_SPORT3_RX,
746 .end = IRQ_SPORT3_RX+1,
747 .flags = IORESOURCE_IRQ,
750 .start = IRQ_SPORT3_ERROR,
751 .end = IRQ_SPORT3_ERROR,
752 .flags = IORESOURCE_IRQ,
756 unsigned short bfin_sport3_peripherals[] = {
757 P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
758 P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
761 static struct platform_device bfin_sport3_uart_device = {
762 .name = "bfin-sport-uart",
764 .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
765 .resource = bfin_sport3_uart_resources,
767 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
773 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
774 unsigned short bfin_can_peripherals[] = {
775 P_CAN0_RX, P_CAN0_TX, 0
778 static struct resource bfin_can_resources[] = {
782 .flags = IORESOURCE_MEM,
785 .start = IRQ_CAN0_RX,
787 .flags = IORESOURCE_IRQ,
790 .start = IRQ_CAN0_TX,
792 .flags = IORESOURCE_IRQ,
795 .start = IRQ_CAN0_ERROR,
796 .end = IRQ_CAN0_ERROR,
797 .flags = IORESOURCE_IRQ,
801 static struct platform_device bfin_can_device = {
803 .num_resources = ARRAY_SIZE(bfin_can_resources),
804 .resource = bfin_can_resources,
806 .platform_data = &bfin_can_peripherals, /* Passed to driver */
811 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
812 static struct resource bfin_atapi_resources[] = {
816 .flags = IORESOURCE_MEM,
819 .start = IRQ_ATAPI_ERR,
820 .end = IRQ_ATAPI_ERR,
821 .flags = IORESOURCE_IRQ,
825 static struct platform_device bfin_atapi_device = {
826 .name = "pata-bf54x",
828 .num_resources = ARRAY_SIZE(bfin_atapi_resources),
829 .resource = bfin_atapi_resources,
833 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
834 static struct mtd_partition partition_info[] = {
836 .name = "linux kernel(nand)",
838 .size = 4 * 1024 * 1024,
841 .name = "file system(nand)",
842 .offset = MTDPART_OFS_APPEND,
843 .size = MTDPART_SIZ_FULL,
847 static struct bf5xx_nand_platform bf5xx_nand_platform = {
848 .page_size = NFC_PG_SIZE_256,
849 .data_width = NFC_NWIDTH_8,
850 .partitions = partition_info,
851 .nr_partitions = ARRAY_SIZE(partition_info),
856 static struct resource bf5xx_nand_resources[] = {
860 .flags = IORESOURCE_MEM,
865 .flags = IORESOURCE_IRQ,
869 static struct platform_device bf5xx_nand_device = {
870 .name = "bf5xx-nand",
872 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
873 .resource = bf5xx_nand_resources,
875 .platform_data = &bf5xx_nand_platform,
880 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
882 static struct bfin_sd_host bfin_sdh_data = {
884 .irq_int0 = IRQ_SDH_MASK0,
885 .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
888 static struct platform_device bf54x_sdh_device = {
892 .platform_data = &bfin_sdh_data,
897 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
898 static struct mtd_partition ezkit_partitions[] = {
900 .name = "bootloader(nor)",
904 .name = "linux kernel(nor)",
906 .offset = MTDPART_OFS_APPEND,
908 .name = "file system(nor)",
909 .size = MTDPART_SIZ_FULL,
910 .offset = MTDPART_OFS_APPEND,
914 static struct physmap_flash_data ezkit_flash_data = {
916 .parts = ezkit_partitions,
917 .nr_parts = ARRAY_SIZE(ezkit_partitions),
920 static struct resource ezkit_flash_resource = {
923 .flags = IORESOURCE_MEM,
926 static struct platform_device ezkit_flash_device = {
927 .name = "physmap-flash",
930 .platform_data = &ezkit_flash_data,
933 .resource = &ezkit_flash_resource,
937 #if defined(CONFIG_MTD_M25P80) \
938 || defined(CONFIG_MTD_M25P80_MODULE)
939 /* SPI flash chip (m25p16) */
940 static struct mtd_partition bfin_spi_flash_partitions[] = {
942 .name = "bootloader(spi)",
945 .mask_flags = MTD_CAP_ROM
947 .name = "linux kernel(spi)",
948 .size = MTDPART_SIZ_FULL,
949 .offset = MTDPART_OFS_APPEND,
953 static struct flash_platform_data bfin_spi_flash_data = {
955 .parts = bfin_spi_flash_partitions,
956 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
960 static struct bfin5xx_spi_chip spi_flash_chip_info = {
961 .enable_dma = 0, /* use dma transfer with this chip*/
966 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
967 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
968 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
974 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
975 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
980 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
982 .vref_delay_usecs = 50, /* internal, no capacitor */
985 .pressure_max = 1000,
987 .stopacq_polarity = 1,
988 .first_conversion_delay = 3,
989 .acquisition_time = 1,
991 .pen_down_acc_interval = 1,
995 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
996 static struct bfin5xx_spi_chip spidev_chip_info = {
1002 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1003 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
1004 .enable_dma = 0, /* use dma transfer with this chip*/
1009 static struct spi_board_info bfin_spi_board_info[] __initdata = {
1010 #if defined(CONFIG_MTD_M25P80) \
1011 || defined(CONFIG_MTD_M25P80_MODULE)
1013 /* the modalias must be the same as spi device driver name */
1014 .modalias = "m25p80", /* Name of spi_driver for this device */
1015 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
1016 .bus_num = 0, /* Framework bus number */
1017 .chip_select = 1, /* SPI_SSEL1*/
1018 .platform_data = &bfin_spi_flash_data,
1019 .controller_data = &spi_flash_chip_info,
1023 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
1024 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
1026 .modalias = "ad1836",
1027 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1029 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
1030 .controller_data = &ad1836_spi_chip_info,
1033 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1035 .modalias = "ad7877",
1036 .platform_data = &bfin_ad7877_ts_info,
1037 .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
1038 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
1041 .controller_data = &spi_ad7877_chip_info,
1044 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1046 .modalias = "spidev",
1047 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1050 .controller_data = &spidev_chip_info,
1053 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1055 .modalias = "adxl34x",
1056 .platform_data = &adxl34x_info,
1058 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1061 .controller_data = &spi_adxl34x_chip_info,
1066 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1068 static struct resource bfin_spi0_resource[] = {
1070 .start = SPI0_REGBASE,
1071 .end = SPI0_REGBASE + 0xFF,
1072 .flags = IORESOURCE_MEM,
1077 .flags = IORESOURCE_DMA,
1082 .flags = IORESOURCE_IRQ,
1087 static struct resource bfin_spi1_resource[] = {
1089 .start = SPI1_REGBASE,
1090 .end = SPI1_REGBASE + 0xFF,
1091 .flags = IORESOURCE_MEM,
1096 .flags = IORESOURCE_DMA,
1101 .flags = IORESOURCE_IRQ,
1105 /* SPI controller data */
1106 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
1107 .num_chipselect = 3,
1108 .enable_dma = 1, /* master has the ability to do dma transfer */
1109 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1112 static struct platform_device bf54x_spi_master0 = {
1114 .id = 0, /* Bus number */
1115 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1116 .resource = bfin_spi0_resource,
1118 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
1122 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
1123 .num_chipselect = 3,
1124 .enable_dma = 1, /* master has the ability to do dma transfer */
1125 .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
1128 static struct platform_device bf54x_spi_master1 = {
1130 .id = 1, /* Bus number */
1131 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
1132 .resource = bfin_spi1_resource,
1134 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
1137 #endif /* spi master and devices */
1139 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1140 static struct resource bfin_twi0_resource[] = {
1142 .start = TWI0_REGBASE,
1143 .end = TWI0_REGBASE + 0xFF,
1144 .flags = IORESOURCE_MEM,
1149 .flags = IORESOURCE_IRQ,
1153 static struct platform_device i2c_bfin_twi0_device = {
1154 .name = "i2c-bfin-twi",
1156 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1157 .resource = bfin_twi0_resource,
1160 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
1161 static struct resource bfin_twi1_resource[] = {
1163 .start = TWI1_REGBASE,
1164 .end = TWI1_REGBASE + 0xFF,
1165 .flags = IORESOURCE_MEM,
1170 .flags = IORESOURCE_IRQ,
1174 static struct platform_device i2c_bfin_twi1_device = {
1175 .name = "i2c-bfin-twi",
1177 .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1178 .resource = bfin_twi1_resource,
1183 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1186 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
1187 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1188 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1190 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1193 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1195 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1199 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1201 I2C_BOARD_INFO("adxl34x", 0x53),
1203 .platform_data = (void *)&adxl34x_info,
1209 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1210 #include <linux/gpio_keys.h>
1212 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1213 {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1214 {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1215 {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1216 {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1219 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1220 .buttons = bfin_gpio_keys_table,
1221 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
1224 static struct platform_device bfin_device_gpiokeys = {
1225 .name = "gpio-keys",
1227 .platform_data = &bfin_gpio_keys_data,
1232 static const unsigned int cclk_vlev_datasheet[] =
1235 * Internal VLEV BF54XSBBC1533
1236 ****temporarily using these values until data sheet is updated
1238 VRPAIR(VLEV_085, 150000000),
1239 VRPAIR(VLEV_090, 250000000),
1240 VRPAIR(VLEV_110, 276000000),
1241 VRPAIR(VLEV_115, 301000000),
1242 VRPAIR(VLEV_120, 525000000),
1243 VRPAIR(VLEV_125, 550000000),
1244 VRPAIR(VLEV_130, 600000000),
1247 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1248 .tuple_tab = cclk_vlev_datasheet,
1249 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1250 .vr_settling_time = 25 /* us */,
1253 static struct platform_device bfin_dpmc = {
1254 .name = "bfin dpmc",
1256 .platform_data = &bfin_dmpc_vreg_data,
1260 static struct platform_device *ezkit_devices[] __initdata = {
1264 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1268 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1269 #ifdef CONFIG_SERIAL_BFIN_UART0
1272 #ifdef CONFIG_SERIAL_BFIN_UART1
1275 #ifdef CONFIG_SERIAL_BFIN_UART2
1278 #ifdef CONFIG_SERIAL_BFIN_UART3
1283 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1284 #ifdef CONFIG_BFIN_SIR0
1287 #ifdef CONFIG_BFIN_SIR1
1290 #ifdef CONFIG_BFIN_SIR2
1293 #ifdef CONFIG_BFIN_SIR3
1298 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1299 &bf54x_lq043_device,
1302 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1306 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1310 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1311 &bfin_isp1760_device,
1314 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1315 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1316 &bfin_sport0_uart_device,
1318 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1319 &bfin_sport1_uart_device,
1321 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1322 &bfin_sport2_uart_device,
1324 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1325 &bfin_sport3_uart_device,
1329 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1333 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1337 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1341 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1345 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1350 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1354 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1355 &bfin_rotary_device,
1358 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1359 &i2c_bfin_twi0_device,
1360 #if !defined(CONFIG_BF542)
1361 &i2c_bfin_twi1_device,
1365 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1366 &bfin_device_gpiokeys,
1369 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1370 &ezkit_flash_device,
1374 static int __init ezkit_init(void)
1376 printk(KERN_INFO "%s(): registering device resources\n", __func__);
1378 i2c_register_board_info(0, bfin_i2c_board_info0,
1379 ARRAY_SIZE(bfin_i2c_board_info0));
1380 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
1381 i2c_register_board_info(1, bfin_i2c_board_info1,
1382 ARRAY_SIZE(bfin_i2c_board_info1));
1385 platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1387 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1392 arch_initcall(ezkit_init);