2 * File: arch/blackfin/mach-bf537/boards/stamp.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2008 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/etherdevice.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/partitions.h>
36 #include <linux/spi/spi.h>
37 #include <linux/spi/flash.h>
38 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
39 #include <linux/usb/isp1362.h>
41 #include <linux/irq.h>
43 #include <asm/bfin5xx_spi.h>
44 #include <asm/portmux.h>
45 #include <linux/usb/sl811.h>
47 #include <linux/spi/ad7877.h>
50 * Name the Board for the /proc/cpuinfo
52 const char bfin_board_name[] = "ADI PNAV-1.0";
55 * Driver needs to know address, irq and flag pin.
58 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
59 static struct resource bfin_pcmcia_cf_resources[] = {
61 .start = 0x20310000, /* IO PORT */
63 .flags = IORESOURCE_MEM,
65 .start = 0x20311000, /* Attribute Memory */
67 .flags = IORESOURCE_MEM,
71 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
73 .start = 6, /* Card Detect PF6 */
75 .flags = IORESOURCE_IRQ,
79 static struct platform_device bfin_pcmcia_cf_device = {
80 .name = "bfin_cf_pcmcia",
82 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
83 .resource = bfin_pcmcia_cf_resources,
87 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
88 static struct platform_device rtc_device = {
94 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
95 #include <linux/smc91x.h>
97 static struct smc91x_platdata smc91x_info = {
98 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
99 .leda = RPC_LED_100_10,
100 .ledb = RPC_LED_TX_RX,
103 static struct resource smc91x_resources[] = {
105 .name = "smc91x-regs",
107 .end = 0x20300300 + 16,
108 .flags = IORESOURCE_MEM,
113 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
116 static struct platform_device smc91x_device = {
119 .num_resources = ARRAY_SIZE(smc91x_resources),
120 .resource = smc91x_resources,
122 .platform_data = &smc91x_info,
127 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
128 static struct resource sl811_hcd_resources[] = {
132 .flags = IORESOURCE_MEM,
136 .flags = IORESOURCE_MEM,
138 .start = CONFIG_USB_SL811_BFIN_IRQ,
139 .end = CONFIG_USB_SL811_BFIN_IRQ,
140 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
144 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
145 void sl811_port_power(struct device *dev, int is_on)
147 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
148 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
153 static struct sl811_platform_data sl811_priv = {
155 .power = 250, /* == 500mA */
156 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
157 .port_power = &sl811_port_power,
161 static struct platform_device sl811_hcd_device = {
165 .platform_data = &sl811_priv,
167 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
168 .resource = sl811_hcd_resources,
172 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
173 static struct resource isp1362_hcd_resources[] = {
177 .flags = IORESOURCE_MEM,
181 .flags = IORESOURCE_MEM,
183 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
184 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
185 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
189 static struct isp1362_platform_data isp1362_priv = {
194 .int_edge_triggered = 0,
195 .remote_wakeup_connected = 0,
196 .no_power_switching = 1,
197 .power_switching_mode = 0,
200 static struct platform_device isp1362_hcd_device = {
201 .name = "isp1362-hcd",
204 .platform_data = &isp1362_priv,
206 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
207 .resource = isp1362_hcd_resources,
211 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
212 static struct platform_device bfin_mii_bus = {
213 .name = "bfin_mii_bus",
216 static struct platform_device bfin_mac_device = {
218 .dev.platform_data = &bfin_mii_bus,
222 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
223 static struct resource net2272_bfin_resources[] = {
226 .end = 0x20300000 + 0x100,
227 .flags = IORESOURCE_MEM,
231 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
235 static struct platform_device net2272_bfin_device = {
238 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
239 .resource = net2272_bfin_resources,
243 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
244 /* all SPI peripherals info goes here */
246 #if defined(CONFIG_MTD_M25P80) \
247 || defined(CONFIG_MTD_M25P80_MODULE)
248 static struct mtd_partition bfin_spi_flash_partitions[] = {
250 .name = "bootloader(spi)",
253 .mask_flags = MTD_CAP_ROM
255 .name = "linux kernel(spi)",
259 .name = "file system(spi)",
261 .offset = 0x00100000,
265 static struct flash_platform_data bfin_spi_flash_data = {
267 .parts = bfin_spi_flash_partitions,
268 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
272 /* SPI flash chip (m25p64) */
273 static struct bfin5xx_spi_chip spi_flash_chip_info = {
274 .enable_dma = 0, /* use dma transfer with this chip*/
279 #if defined(CONFIG_BFIN_SPI_ADC) \
280 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
282 static struct bfin5xx_spi_chip spi_adc_chip_info = {
283 .enable_dma = 1, /* use dma transfer with this chip*/
288 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
289 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
290 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
296 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
297 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
303 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
304 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
310 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
311 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
312 .cs_change_per_word = 0,
317 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
319 .vref_delay_usecs = 50, /* internal, no capacitor */
322 .pressure_max = 1000,
324 .stopacq_polarity = 1,
325 .first_conversion_delay = 3,
326 .acquisition_time = 1,
328 .pen_down_acc_interval = 1,
332 static struct spi_board_info bfin_spi_board_info[] __initdata = {
333 #if defined(CONFIG_MTD_M25P80) \
334 || defined(CONFIG_MTD_M25P80_MODULE)
336 /* the modalias must be the same as spi device driver name */
337 .modalias = "m25p80", /* Name of spi_driver for this device */
338 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
339 .bus_num = 0, /* Framework bus number */
340 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
341 .platform_data = &bfin_spi_flash_data,
342 .controller_data = &spi_flash_chip_info,
347 #if defined(CONFIG_BFIN_SPI_ADC) \
348 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
350 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
351 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
352 .bus_num = 0, /* Framework bus number */
353 .chip_select = 1, /* Framework chip select. */
354 .platform_data = NULL, /* No spi_driver specific config */
355 .controller_data = &spi_adc_chip_info,
359 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
360 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
362 .modalias = "ad1836-spi",
363 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
365 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
366 .controller_data = &ad1836_spi_chip_info,
369 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
371 .modalias = "ad9960-spi",
372 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
375 .controller_data = &ad9960_spi_chip_info,
378 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
380 .modalias = "mmc_spi",
381 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
384 .controller_data = &mmc_spi_chip_info,
388 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
390 .modalias = "ad7877",
391 .platform_data = &bfin_ad7877_ts_info,
393 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
396 .controller_data = &spi_ad7877_chip_info,
403 static struct resource bfin_spi0_resource[] = {
405 .start = SPI0_REGBASE,
406 .end = SPI0_REGBASE + 0xFF,
407 .flags = IORESOURCE_MEM,
412 .flags = IORESOURCE_DMA,
417 .flags = IORESOURCE_IRQ,
421 /* SPI controller data */
422 static struct bfin5xx_spi_master bfin_spi0_info = {
424 .enable_dma = 1, /* master has the ability to do dma transfer */
425 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
428 static struct platform_device bfin_spi0_device = {
430 .id = 0, /* Bus number */
431 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
432 .resource = bfin_spi0_resource,
434 .platform_data = &bfin_spi0_info, /* Passed to driver */
437 #endif /* spi master and devices */
439 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
440 static struct platform_device bfin_fb_device = {
441 .name = "bf537-lq035",
445 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
446 static struct resource bfin_uart_resources[] = {
450 .flags = IORESOURCE_MEM,
454 .flags = IORESOURCE_MEM,
458 static struct platform_device bfin_uart_device = {
461 .num_resources = ARRAY_SIZE(bfin_uart_resources),
462 .resource = bfin_uart_resources,
466 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
467 #ifdef CONFIG_BFIN_SIR0
468 static struct resource bfin_sir0_resources[] = {
472 .flags = IORESOURCE_MEM,
475 .start = IRQ_UART0_RX,
476 .end = IRQ_UART0_RX+1,
477 .flags = IORESOURCE_IRQ,
480 .start = CH_UART0_RX,
481 .end = CH_UART0_RX+1,
482 .flags = IORESOURCE_DMA,
486 static struct platform_device bfin_sir0_device = {
489 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
490 .resource = bfin_sir0_resources,
493 #ifdef CONFIG_BFIN_SIR1
494 static struct resource bfin_sir1_resources[] = {
498 .flags = IORESOURCE_MEM,
501 .start = IRQ_UART1_RX,
502 .end = IRQ_UART1_RX+1,
503 .flags = IORESOURCE_IRQ,
506 .start = CH_UART1_RX,
507 .end = CH_UART1_RX+1,
508 .flags = IORESOURCE_DMA,
512 static struct platform_device bfin_sir1_device = {
515 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
516 .resource = bfin_sir1_resources,
521 static struct platform_device *stamp_devices[] __initdata = {
522 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
523 &bfin_pcmcia_cf_device,
526 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
530 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
534 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
538 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
542 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
547 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
548 &net2272_bfin_device,
551 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
555 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
559 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
563 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
564 #ifdef CONFIG_BFIN_SIR0
567 #ifdef CONFIG_BFIN_SIR1
573 static int __init pnav_init(void)
575 printk(KERN_INFO "%s(): registering device resources\n", __func__);
576 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
577 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
578 spi_register_board_info(bfin_spi_board_info,
579 ARRAY_SIZE(bfin_spi_board_info));
584 arch_initcall(pnav_init);
586 void bfin_get_ether_addr(char *addr)
588 random_ether_addr(addr);
589 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
591 EXPORT_SYMBOL(bfin_get_ether_addr);