tracing/kprobe: Drop function argument access syntax
[safe/jmp/linux-2.6] / Documentation / trace / kprobetrace.txt
1                         Kprobe-based Event Tracing
2                         ==========================
3
4                  Documentation is written by Masami Hiramatsu
5
6
7 Overview
8 --------
9 These events are similar to tracepoint based events. Instead of Tracepoint,
10 this is based on kprobes (kprobe and kretprobe). So it can probe wherever
11 kprobes can probe (this means, all functions body except for __kprobes
12 functions). Unlike the Tracepoint based event, this can be added and removed
13 dynamically, on the fly.
14
15 To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
16
17 Similar to the events tracer, this doesn't need to be activated via
18 current_tracer. Instead of that, add probe points via
19 /sys/kernel/debug/tracing/kprobe_events, and enable it via
20 /sys/kernel/debug/tracing/events/kprobes/<EVENT>/enabled.
21
22
23 Synopsis of kprobe_events
24 -------------------------
25   p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS]     : Set a probe
26   r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS]                : Set a return probe
27
28  GRP            : Group name. If omitted, use "kprobes" for it.
29  EVENT          : Event name. If omitted, the event name is generated
30                   based on SYMBOL+offs or MEMADDR.
31  SYMBOL[+offs]  : Symbol+offset where the probe is inserted.
32  MEMADDR        : Address where the probe is inserted.
33
34  FETCHARGS      : Arguments. Each probe can have up to 128 args.
35   %REG          : Fetch register REG
36   @ADDR         : Fetch memory at ADDR (ADDR should be in kernel)
37   @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
38   $stackN       : Fetch Nth entry of stack (N >= 0)
39   $stack        : Fetch stack address.
40   $retval       : Fetch return value.(*)
41   +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
42   NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
43
44   (*) only for return probe.
45   (**) this is useful for fetching a field of data structures.
46
47
48 Per-Probe Event Filtering
49 -------------------------
50  Per-probe event filtering feature allows you to set different filter on each
51 probe and gives you what arguments will be shown in trace buffer. If an event
52 name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
53 under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
54 'enabled', 'format' and 'filter'.
55
56 enabled:
57   You can enable/disable the probe by writing 1 or 0 on it.
58
59 format:
60   This shows the format of this probe event.
61
62 filter:
63   You can write filtering rules of this event.
64
65 id:
66   This shows the id of this probe event.
67
68
69 Event Profiling
70 ---------------
71  You can check the total number of probe hits and probe miss-hits via
72 /sys/kernel/debug/tracing/kprobe_profile.
73  The first column is event name, the second is the number of probe hits,
74 the third is the number of probe miss-hits.
75
76
77 Usage examples
78 --------------
79 To add a probe as a new event, write a new definition to kprobe_events
80 as below.
81
82   echo p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack) > /sys/kernel/debug/tracing/kprobe_events
83
84  This sets a kprobe on the top of do_sys_open() function with recording
85 1st to 4th arguments as "myprobe" event. Note, which register/stack entry is
86 assigned to each function argument depends on arch-specific ABI. If you unsure
87 the ABI, please try to use probe subcommand of perf-tools (you can find it
88 under tools/perf/).
89 As this example shows, users can choose more familiar names for each arguments.
90
91   echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
92
93  This sets a kretprobe on the return point of do_sys_open() function with
94 recording return value as "myretprobe" event.
95  You can see the format of these events via
96 /sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
97
98   cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
99 name: myprobe
100 ID: 780
101 format:
102         field:unsigned short common_type;       offset:0;       size:2; signed:0;
103         field:unsigned char common_flags;       offset:2;       size:1; signed:0;
104         field:unsigned char common_preempt_count;       offset:3; size:1;signed:0;
105         field:int common_pid;   offset:4;       size:4; signed:1;
106         field:int common_lock_depth;    offset:8;       size:4; signed:1;
107
108         field:unsigned long __probe_ip; offset:12;      size:4; signed:0;
109         field:int __probe_nargs;        offset:16;      size:4; signed:1;
110         field:unsigned long dfd;        offset:20;      size:4; signed:0;
111         field:unsigned long filename;   offset:24;      size:4; signed:0;
112         field:unsigned long flags;      offset:28;      size:4; signed:0;
113         field:unsigned long mode;       offset:32;      size:4; signed:0;
114
115
116 print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->__probe_ip,
117 REC->dfd, REC->filename, REC->flags, REC->mode
118
119  You can see that the event has 4 arguments as in the expressions you specified.
120
121   echo > /sys/kernel/debug/tracing/kprobe_events
122
123  This clears all probe points.
124
125  Right after definition, each event is disabled by default. For tracing these
126 events, you need to enable it.
127
128   echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
129   echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
130
131  And you can see the traced information via /sys/kernel/debug/tracing/trace.
132
133   cat /sys/kernel/debug/tracing/trace
134 # tracer: nop
135 #
136 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
137 #              | |       |          |         |
138            <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
139            <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
140            <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
141            <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
142            <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
143            <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
144
145
146  Each line shows when the kernel hits an event, and <- SYMBOL means kernel
147 returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
148 returns from do_sys_open to sys_open+0x1b).
149